services/surfaceflinger/Layer.cpp

/*
 * Copyright (C) 2007 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// TODO(b/129481165): remove the #pragma below and fix conversion issues
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wconversion"

//#define LOG_NDEBUG 0
#undef LOG_TAG
#define LOG_TAG "Layer"
#define ATRACE_TAG ATRACE_TAG_GRAPHICS

#include "Layer.h"

#include <android-base/properties.h>
#include <android-base/stringprintf.h>
#include <android/native_window.h>
#include <binder/IPCThreadState.h>
#include <compositionengine/Display.h>
#include <compositionengine/LayerFECompositionState.h>
#include <compositionengine/OutputLayer.h>
#include <compositionengine/impl/OutputLayerCompositionState.h>
#include <cutils/compiler.h>
#include <cutils/native_handle.h>
#include <cutils/properties.h>
#include <gui/BufferItem.h>
#include <gui/LayerDebugInfo.h>
#include <gui/Surface.h>
#include <math.h>
#include <private/android_filesystem_config.h>
#include <renderengine/RenderEngine.h>
#include <stdint.h>
#include <stdlib.h>
#include <sys/types.h>
#include <ui/DebugUtils.h>
#include <ui/GraphicBuffer.h>
#include <ui/PixelFormat.h>
#include <utils/Errors.h>
#include <utils/Log.h>
#include <utils/NativeHandle.h>
#include <utils/StopWatch.h>
#include <utils/Trace.h>

#include <algorithm>
#include <mutex>
#include <sstream>

#include "BufferLayer.h"
#include "Colorizer.h"
#include "DisplayDevice.h"
#include "DisplayHardware/HWComposer.h"
#include "EffectLayer.h"
#include "FrameTimeline.h"
#include "FrameTracer/FrameTracer.h"
#include "LayerProtoHelper.h"
#include "LayerRejecter.h"
#include "MonitoredProducer.h"
#include "SurfaceFlinger.h"
#include "TimeStats/TimeStats.h"
#include "TunnelModeEnabledReporter.h"

#define DEBUG_RESIZE 0

namespace android {
namespace {
constexpr int kDumpTableRowLength = 159;
} // namespace

using base::StringAppendF;
using namespace android::flag_operators;
using PresentState = frametimeline::SurfaceFrame::PresentState;
using gui::WindowInfo;

std::atomic<int32_t> Layer::sSequence{1};

Layer::Layer(const LayerCreationArgs& args)
      : mFlinger(args.flinger),
        mName(args.name),
        mClientRef(args.client),
        mWindowType(
                static_cast<WindowInfo::Type>(args.metadata.getInt32(METADATA_WINDOW_TYPE, 0))) {
    uint32_t layerFlags = 0;
    if (args.flags & ISurfaceComposerClient::eHidden) layerFlags |= layer_state_t::eLayerHidden;
    if (args.flags & ISurfaceComposerClient::eOpaque) layerFlags |= layer_state_t::eLayerOpaque;
    if (args.flags & ISurfaceComposerClient::eSecure) layerFlags |= layer_state_t::eLayerSecure;
    if (args.flags & ISurfaceComposerClient::eSkipScreenshot)
        layerFlags |= layer_state_t::eLayerSkipScreenshot;

    mDrawingState.active_legacy.w = args.w;
    mDrawingState.active_legacy.h = args.h;
    mDrawingState.flags = layerFlags;
    mDrawingState.active_legacy.transform.set(0, 0);
    mDrawingState.crop.makeInvalid();
    mDrawingState.requestedCrop = mDrawingState.crop;
    mDrawingState.z = 0;
    mDrawingState.color.a = 1.0f;
    mDrawingState.layerStack = 0;
    mDrawingState.sequence = 0;
    mDrawingState.requested_legacy = mDrawingState.active_legacy;
    mDrawingState.width = UINT32_MAX;
    mDrawingState.height = UINT32_MAX;
    mDrawingState.transform.set(0, 0);
    mDrawingState.frameNumber = 0;
    mDrawingState.bufferTransform = 0;
    mDrawingState.transformToDisplayInverse = false;
    mDrawingState.crop.makeInvalid();
    mDrawingState.acquireFence = sp<Fence>::make(-1);
    mDrawingState.acquireFenceTime = std::make_shared<FenceTime>(mDrawingState.acquireFence);
    mDrawingState.dataspace = ui::Dataspace::UNKNOWN;
    mDrawingState.hdrMetadata.validTypes = 0;
    mDrawingState.surfaceDamageRegion = Region::INVALID_REGION;
    mDrawingState.cornerRadius = 0.0f;
    mDrawingState.backgroundBlurRadius = 0;
    mDrawingState.api = -1;
    mDrawingState.hasColorTransform = false;
    mDrawingState.colorSpaceAgnostic = false;
    mDrawingState.frameRateSelectionPriority = PRIORITY_UNSET;
    mDrawingState.metadata = args.metadata;
    mDrawingState.shadowRadius = 0.f;
    mDrawingState.fixedTransformHint = ui::Transform::ROT_INVALID;
    mDrawingState.frameTimelineInfo = {};
    mDrawingState.postTime = -1;
    mDrawingState.destinationFrame.makeInvalid();

    if (args.flags & ISurfaceComposerClient::eNoColorFill) {
        // Set an invalid color so there is no color fill.
        mDrawingState.color.r = -1.0_hf;
        mDrawingState.color.g = -1.0_hf;
        mDrawingState.color.b = -1.0_hf;
    }

    CompositorTiming compositorTiming;
    args.flinger->getCompositorTiming(&compositorTiming);
    mFrameEventHistory.initializeCompositorTiming(compositorTiming);
    mFrameTracker.setDisplayRefreshPeriod(compositorTiming.interval);

    mCallingPid = args.callingPid;
    mCallingUid = args.callingUid;

    if (mCallingUid == AID_GRAPHICS || mCallingUid == AID_SYSTEM) {
        // If the system didn't send an ownerUid, use the callingUid for the ownerUid.
        mOwnerUid = args.metadata.getInt32(METADATA_OWNER_UID, mCallingUid);
        mOwnerPid = args.metadata.getInt32(METADATA_OWNER_PID, mCallingPid);
    } else {
        // A create layer request from a non system request cannot specify the owner uid
        mOwnerUid = mCallingUid;
        mOwnerPid = mCallingPid;
    }
}

void Layer::onFirstRef() {
    mFlinger->onLayerFirstRef(this);
}

Layer::~Layer() {
    sp<Client> c(mClientRef.promote());
    if (c != 0) {
        c->detachLayer(this);
    }

    mFrameTracker.logAndResetStats(mName);
    mFlinger->onLayerDestroyed(this);

    if (mDrawingState.sidebandStream != nullptr) {
        mFlinger->mTunnelModeEnabledReporter->decrementTunnelModeCount();
    }
    if (mHadClonedChild) {
        mFlinger->mNumClones--;
    }
}

LayerCreationArgs::LayerCreationArgs(SurfaceFlinger* flinger, sp<Client> client, std::string name,
                                     uint32_t w, uint32_t h, uint32_t flags, LayerMetadata metadata)
      : flinger(flinger),
        client(std::move(client)),
        name(std::move(name)),
        w(w),
        h(h),
        flags(flags),
        metadata(std::move(metadata)) {
    IPCThreadState* ipc = IPCThreadState::self();
    callingPid = ipc->getCallingPid();
    callingUid = ipc->getCallingUid();
}

// ---------------------------------------------------------------------------
// callbacks
// ---------------------------------------------------------------------------

/*
 * onLayerDisplayed is only meaningful for BufferLayer, but, is called through
 * Layer.  So, the implementation is done in BufferLayer.  When called on a
 * EffectLayer object, it's essentially a NOP.
 */
void Layer::onLayerDisplayed(const sp<Fence>& /*releaseFence*/) {}

void Layer::removeRelativeZ(const std::vector<Layer*>& layersInTree) {
    if (mDrawingState.zOrderRelativeOf == nullptr) {
        return;
    }

    sp<Layer> strongRelative = mDrawingState.zOrderRelativeOf.promote();
    if (strongRelative == nullptr) {
        setZOrderRelativeOf(nullptr);
        return;
    }

    if (!std::binary_search(layersInTree.begin(), layersInTree.end(), strongRelative.get())) {
        strongRelative->removeZOrderRelative(this);
        mFlinger->setTransactionFlags(eTraversalNeeded);
        setZOrderRelativeOf(nullptr);
    }
}

void Layer::removeFromCurrentState() {
    if (!mRemovedFromDrawingState) {
        mRemovedFromDrawingState = true;
        mFlinger->mScheduler->deregisterLayer(this);
    }

    mFlinger->markLayerPendingRemovalLocked(this);
}

sp<Layer> Layer::getRootLayer() {
    sp<Layer> parent = getParent();
    if (parent == nullptr) {
        return this;
    }
    return parent->getRootLayer();
}

void Layer::onRemovedFromCurrentState() {
    // Use the root layer since we want to maintain the hierarchy for the entire subtree.
    auto layersInTree = getRootLayer()->getLayersInTree(LayerVector::StateSet::Current);
    std::sort(layersInTree.begin(), layersInTree.end());

    traverse(LayerVector::StateSet::Current, [&](Layer* layer) {
        layer->removeFromCurrentState();
        layer->removeRelativeZ(layersInTree);
    });
}

void Layer::addToCurrentState() {
    if (mRemovedFromDrawingState) {
        mRemovedFromDrawingState = false;
        mFlinger->mScheduler->registerLayer(this);
        mFlinger->removeFromOffscreenLayers(this);
    }

    for (const auto& child : mCurrentChildren) {
        child->addToCurrentState();
    }
}

// ---------------------------------------------------------------------------
// set-up
// ---------------------------------------------------------------------------

bool Layer::getPremultipledAlpha() const {
    return mPremultipliedAlpha;
}

sp<IBinder> Layer::getHandle() {
    Mutex::Autolock _l(mLock);
    if (mGetHandleCalled) {
        ALOGE("Get handle called twice" );
        return nullptr;
    }
    mGetHandleCalled = true;
    return new Handle(mFlinger, this);
}

// ---------------------------------------------------------------------------
// h/w composer set-up
// ---------------------------------------------------------------------------

static Rect reduce(const Rect& win, const Region& exclude) {
    if (CC_LIKELY(exclude.isEmpty())) {
        return win;
    }
    if (exclude.isRect()) {
        return win.reduce(exclude.getBounds());
    }
    return Region(win).subtract(exclude).getBounds();
}

static FloatRect reduce(const FloatRect& win, const Region& exclude) {
    if (CC_LIKELY(exclude.isEmpty())) {
        return win;
    }
    // Convert through Rect (by rounding) for lack of FloatRegion
    return Region(Rect{win}).subtract(exclude).getBounds().toFloatRect();
}

Rect Layer::getScreenBounds(bool reduceTransparentRegion) const {
    if (!reduceTransparentRegion) {
        return Rect{mScreenBounds};
    }

    FloatRect bounds = getBounds();
    ui::Transform t = getTransform();
    // Transform to screen space.
    bounds = t.transform(bounds);
    return Rect{bounds};
}

FloatRect Layer::getBounds() const {
    const State& s(getDrawingState());
    return getBounds(getActiveTransparentRegion(s));
}

FloatRect Layer::getBounds(const Region& activeTransparentRegion) const {
    // Subtract the transparent region and snap to the bounds.
    return reduce(mBounds, activeTransparentRegion);
}

void Layer::computeBounds(FloatRect parentBounds, ui::Transform parentTransform,
                          float parentShadowRadius) {
    const State& s(getDrawingState());

    // Calculate effective layer transform
    mEffectiveTransform = parentTransform * getActiveTransform(s);

    // Transform parent bounds to layer space
    parentBounds = getActiveTransform(s).inverse().transform(parentBounds);

    // Calculate source bounds
    mSourceBounds = computeSourceBounds(parentBounds);

    // Calculate bounds by croping diplay frame with layer crop and parent bounds
    FloatRect bounds = mSourceBounds;
    const Rect layerCrop = getCrop(s);
    if (!layerCrop.isEmpty()) {
        bounds = mSourceBounds.intersect(layerCrop.toFloatRect());
    }
    bounds = bounds.intersect(parentBounds);

    mBounds = bounds;
    mScreenBounds = mEffectiveTransform.transform(mBounds);

    // Use the layer's own shadow radius if set. Otherwise get the radius from
    // parent.
    if (s.shadowRadius > 0.f) {
        mEffectiveShadowRadius = s.shadowRadius;
    } else {
        mEffectiveShadowRadius = parentShadowRadius;
    }

    // Shadow radius is passed down to only one layer so if the layer can draw shadows,
    // don't pass it to its children.
    const float childShadowRadius = canDrawShadows() ? 0.f : mEffectiveShadowRadius;

    for (const sp<Layer>& child : mDrawingChildren) {
        child->computeBounds(mBounds, mEffectiveTransform, childShadowRadius);
    }
}

Rect Layer::getCroppedBufferSize(const State& s) const {
    Rect size = getBufferSize(s);
    Rect crop = getCrop(s);
    if (!crop.isEmpty() && size.isValid()) {
        size.intersect(crop, &size);
    } else if (!crop.isEmpty()) {
        size = crop;
    }
    return size;
}

void Layer::setupRoundedCornersCropCoordinates(Rect win,
                                               const FloatRect& roundedCornersCrop) const {
    // Translate win by the rounded corners rect coordinates, to have all values in
    // layer coordinate space.
    win.left -= roundedCornersCrop.left;
    win.right -= roundedCornersCrop.left;
    win.top -= roundedCornersCrop.top;
    win.bottom -= roundedCornersCrop.top;
}

void Layer::prepareBasicGeometryCompositionState() {
    const auto& drawingState{getDrawingState()};
    const uint32_t layerStack = getLayerStack();
    const auto alpha = static_cast<float>(getAlpha());
    const bool opaque = isOpaque(drawingState);
    const bool usesRoundedCorners = getRoundedCornerState().radius != 0.f;

    auto blendMode = Hwc2::IComposerClient::BlendMode::NONE;
    if (!opaque || alpha != 1.0f) {
        blendMode = mPremultipliedAlpha ? Hwc2::IComposerClient::BlendMode::PREMULTIPLIED
                                        : Hwc2::IComposerClient::BlendMode::COVERAGE;
    }

    auto* compositionState = editCompositionState();
    compositionState->layerStackId =
            (layerStack != ~0u) ? std::make_optional(layerStack) : std::nullopt;
    compositionState->internalOnly = getPrimaryDisplayOnly();
    compositionState->isVisible = isVisible();
    compositionState->isOpaque = opaque && !usesRoundedCorners && alpha == 1.f;
    compositionState->shadowRadius = mEffectiveShadowRadius;

    compositionState->contentDirty = contentDirty;
    contentDirty = false;

    compositionState->geomLayerBounds = mBounds;
    compositionState->geomLayerTransform = getTransform();
    compositionState->geomInverseLayerTransform = compositionState->geomLayerTransform.inverse();
    compositionState->transparentRegionHint = getActiveTransparentRegion(drawingState);

    compositionState->blendMode = static_cast<Hwc2::IComposerClient::BlendMode>(blendMode);
    compositionState->alpha = alpha;
    compositionState->backgroundBlurRadius = drawingState.backgroundBlurRadius;
    compositionState->blurRegions = drawingState.blurRegions;
    compositionState->stretchEffect = getStretchEffect();
}

void Layer::prepareGeometryCompositionState() {
    const auto& drawingState{getDrawingState()};

    int type = drawingState.metadata.getInt32(METADATA_WINDOW_TYPE, 0);
    int appId = drawingState.metadata.getInt32(METADATA_OWNER_UID, 0);
    sp<Layer> parent = mDrawingParent.promote();
    if (parent.get()) {
        auto& parentState = parent->getDrawingState();
        const int parentType = parentState.metadata.getInt32(METADATA_WINDOW_TYPE, 0);
        const int parentAppId = parentState.metadata.getInt32(METADATA_OWNER_UID, 0);
        if (parentType > 0 && parentAppId > 0) {
            type = parentType;
            appId = parentAppId;
        }
    }

    auto* compositionState = editCompositionState();

    compositionState->geomBufferSize = getBufferSize(drawingState);
    compositionState->geomContentCrop = getBufferCrop();
    compositionState->geomCrop = getCrop(drawingState);
    compositionState->geomBufferTransform = getBufferTransform();
    compositionState->geomBufferUsesDisplayInverseTransform = getTransformToDisplayInverse();
    compositionState->geomUsesSourceCrop = usesSourceCrop();
    compositionState->isSecure = isSecure();

    compositionState->metadata.clear();
    const auto& supportedMetadata = mFlinger->getHwComposer().getSupportedLayerGenericMetadata();
    for (const auto& [key, mandatory] : supportedMetadata) {
        const auto& genericLayerMetadataCompatibilityMap =
                mFlinger->getGenericLayerMetadataKeyMap();
        auto compatIter = genericLayerMetadataCompatibilityMap.find(key);
        if (compatIter == std::end(genericLayerMetadataCompatibilityMap)) {
            continue;
        }
        const uint32_t id = compatIter->second;

        auto it = drawingState.metadata.mMap.find(id);
        if (it == std::end(drawingState.metadata.mMap)) {
            continue;
        }

        compositionState->metadata
                .emplace(key, compositionengine::GenericLayerMetadataEntry{mandatory, it->second});
    }
}

void Layer::preparePerFrameCompositionState() {
    const auto& drawingState{getDrawingState()};
    auto* compositionState = editCompositionState();

    compositionState->forceClientComposition = false;

    compositionState->isColorspaceAgnostic = isColorSpaceAgnostic();
    compositionState->dataspace = getDataSpace();
    compositionState->colorTransform = getColorTransform();
    compositionState->colorTransformIsIdentity = !hasColorTransform();
    compositionState->surfaceDamage = surfaceDamageRegion;
    compositionState->hasProtectedContent = isProtected();

    const bool usesRoundedCorners = getRoundedCornerState().radius != 0.f;

    compositionState->isOpaque =
            isOpaque(drawingState) && !usesRoundedCorners && getAlpha() == 1.0_hf;

    // Force client composition for special cases known only to the front-end.
    // Rounded corners no longer force client composition, since we may use a
    // hole punch so that the layer will appear to have rounded corners.
    if (isHdrY410() || drawShadows() || drawingState.blurRegions.size() > 0 ||
        compositionState->stretchEffect.hasEffect()) {
        compositionState->forceClientComposition = true;
    }
}

void Layer::prepareCursorCompositionState() {
    const State& drawingState{getDrawingState()};
    auto* compositionState = editCompositionState();

    // Apply the layer's transform, followed by the display's global transform
    // Here we're guaranteed that the layer's transform preserves rects
    Rect win = getCroppedBufferSize(drawingState);
    // Subtract the transparent region and snap to the bounds
    Rect bounds = reduce(win, getActiveTransparentRegion(drawingState));
    Rect frame(getTransform().transform(bounds));

    compositionState->cursorFrame = frame;
}

sp<compositionengine::LayerFE> Layer::asLayerFE() const {
    return const_cast<compositionengine::LayerFE*>(
            static_cast<const compositionengine::LayerFE*>(this));
}

sp<compositionengine::LayerFE> Layer::getCompositionEngineLayerFE() const {
    return nullptr;
}

compositionengine::LayerFECompositionState* Layer::editCompositionState() {
    return nullptr;
}

const compositionengine::LayerFECompositionState* Layer::getCompositionState() const {
    return nullptr;
}

bool Layer::onPreComposition(nsecs_t) {
    return false;
}

void Layer::prepareCompositionState(compositionengine::LayerFE::StateSubset subset) {
    using StateSubset = compositionengine::LayerFE::StateSubset;

    switch (subset) {
        case StateSubset::BasicGeometry:
            prepareBasicGeometryCompositionState();
            break;

        case StateSubset::GeometryAndContent:
            prepareBasicGeometryCompositionState();
            prepareGeometryCompositionState();
            preparePerFrameCompositionState();
            break;

        case StateSubset::Content:
            preparePerFrameCompositionState();
            break;

        case StateSubset::Cursor:
            prepareCursorCompositionState();
            break;
    }
}

const char* Layer::getDebugName() const {
    return mName.c_str();
}

// ---------------------------------------------------------------------------
// drawing...
// ---------------------------------------------------------------------------

std::optional<compositionengine::LayerFE::LayerSettings> Layer::prepareClientComposition(
        compositionengine::LayerFE::ClientCompositionTargetSettings& targetSettings) {
    if (!getCompositionState()) {
        return {};
    }

    FloatRect bounds = getBounds();
    half alpha = getAlpha();

    compositionengine::LayerFE::LayerSettings layerSettings;
    layerSettings.geometry.boundaries = bounds;
    layerSettings.geometry.positionTransform = getTransform().asMatrix4();

    // skip drawing content if the targetSettings indicate the content will be occluded
    const bool drawContent = targetSettings.realContentIsVisible || targetSettings.clearContent;
    layerSettings.skipContentDraw = !drawContent;

    if (hasColorTransform()) {
        layerSettings.colorTransform = getColorTransform();
    }

    const auto roundedCornerState = getRoundedCornerState();
    layerSettings.geometry.roundedCornersRadius = roundedCornerState.radius;
    layerSettings.geometry.roundedCornersCrop = roundedCornerState.cropRect;

    layerSettings.alpha = alpha;
    layerSettings.sourceDataspace = getDataSpace();
    switch (targetSettings.blurSetting) {
        case LayerFE::ClientCompositionTargetSettings::BlurSetting::Enabled:
            layerSettings.backgroundBlurRadius = getBackgroundBlurRadius();
            layerSettings.blurRegions = getBlurRegions();
            layerSettings.blurRegionTransform =
                    getActiveTransform(getDrawingState()).inverse().asMatrix4();
            break;
        case LayerFE::ClientCompositionTargetSettings::BlurSetting::BackgroundBlurOnly:
            layerSettings.backgroundBlurRadius = getBackgroundBlurRadius();
            break;
        case LayerFE::ClientCompositionTargetSettings::BlurSetting::BlurRegionsOnly:
            layerSettings.blurRegions = getBlurRegions();
            layerSettings.blurRegionTransform =
                    getActiveTransform(getDrawingState()).inverse().asMatrix4();
            break;
        case LayerFE::ClientCompositionTargetSettings::BlurSetting::Disabled:
        default:
            break;
    }
    layerSettings.stretchEffect = getStretchEffect();
    // Record the name of the layer for debugging further down the stack.
    layerSettings.name = getName();
    return layerSettings;
}

void Layer::prepareClearClientComposition(LayerFE::LayerSettings& layerSettings,
                                          bool blackout) const {
    layerSettings.source.buffer.buffer = nullptr;
    layerSettings.source.solidColor = half3(0.0, 0.0, 0.0);
    layerSettings.disableBlending = true;
    layerSettings.bufferId = 0;
    layerSettings.frameNumber = 0;

    // If layer is blacked out, force alpha to 1 so that we draw a black color layer.
    layerSettings.alpha = blackout ? 1.0f : 0.0f;
    layerSettings.name = getName();
}

// TODO(b/188891810): This method now only ever returns 0 or 1 layers so we should return
// std::optional instead of a vector.  Additionally, we should consider removing
// this method entirely in favor of calling prepareClientComposition directly.
std::vector<compositionengine::LayerFE::LayerSettings> Layer::prepareClientCompositionList(
        compositionengine::LayerFE::ClientCompositionTargetSettings& targetSettings) {
    std::optional<compositionengine::LayerFE::LayerSettings> layerSettings =
            prepareClientComposition(targetSettings);
    // Nothing to render.
    if (!layerSettings) {
        return {};
    }

    // HWC requests to clear this layer.
    if (targetSettings.clearContent) {
        prepareClearClientComposition(*layerSettings, false /* blackout */);
        return {*layerSettings};
    }

    // set the shadow for the layer if needed
    prepareShadowClientComposition(*layerSettings, targetSettings.viewport);

    return {*layerSettings};
}

Hwc2::IComposerClient::Composition Layer::getCompositionType(const DisplayDevice& display) const {
    const auto outputLayer = findOutputLayerForDisplay(&display);
    if (outputLayer == nullptr) {
        return Hwc2::IComposerClient::Composition::INVALID;
    }
    if (outputLayer->getState().hwc) {
        return (*outputLayer->getState().hwc).hwcCompositionType;
    } else {
        return Hwc2::IComposerClient::Composition::CLIENT;
    }
}

// ----------------------------------------------------------------------------
// local state
// ----------------------------------------------------------------------------

bool Layer::isSecure() const {
    const State& s(mDrawingState);
    if (s.flags & layer_state_t::eLayerSecure) {
        return true;
    }

    const auto p = mDrawingParent.promote();
    return (p != nullptr) ? p->isSecure() : false;
}

// ----------------------------------------------------------------------------
// transaction
// ----------------------------------------------------------------------------

uint32_t Layer::doTransaction(uint32_t flags) {
    ATRACE_CALL();

    // TODO: This is unfortunate.
    mDrawingStateModified = mDrawingState.modified;
    mDrawingState.modified = false;

    const State& s(getDrawingState());

    if (updateGeometry()) {
        // invalidate and recompute the visible regions if needed
        flags |= Layer::eVisibleRegion;
    }

    if (s.sequence != mLastCommittedTxSequence) {
        // invalidate and recompute the visible regions if needed
         mLastCommittedTxSequence = s.sequence;
        flags |= eVisibleRegion;
        this->contentDirty = true;

        // we may use linear filtering, if the matrix scales us
        mNeedsFiltering = getActiveTransform(s).needsBilinearFiltering();
    }

    commitTransaction(mDrawingState);

    return flags;
}

void Layer::commitTransaction(State&) {
    // Set the present state for all bufferlessSurfaceFramesTX to Presented. The
    // bufferSurfaceFrameTX will be presented in latchBuffer.
    for (auto& [token, surfaceFrame] : mDrawingState.bufferlessSurfaceFramesTX) {
        if (surfaceFrame->getPresentState() != PresentState::Presented) {
            // With applyPendingStates, we could end up having presented surfaceframes from previous
            // states
            surfaceFrame->setPresentState(PresentState::Presented);
            mFlinger->mFrameTimeline->addSurfaceFrame(surfaceFrame);
        }
    }
    mDrawingState.bufferlessSurfaceFramesTX.clear();
}

uint32_t Layer::getTransactionFlags(uint32_t flags) {
    auto ret = mTransactionFlags & flags;
    mTransactionFlags &= ~flags;
    return ret;
}

uint32_t Layer::setTransactionFlags(uint32_t flags) {
    return mTransactionFlags |= flags;
}

bool Layer::setPosition(float x, float y) {
    if (mDrawingState.transform.tx() == x && mDrawingState.transform.ty() == y) return false;
    mDrawingState.sequence++;
    mDrawingState.transform.set(x, y);

    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setChildLayer(const sp<Layer>& childLayer, int32_t z) {
    ssize_t idx = mCurrentChildren.indexOf(childLayer);
    if (idx < 0) {
        return false;
    }
    if (childLayer->setLayer(z)) {
        mCurrentChildren.removeAt(idx);
        mCurrentChildren.add(childLayer);
        return true;
    }
    return false;
}

bool Layer::setChildRelativeLayer(const sp<Layer>& childLayer,
        const sp<IBinder>& relativeToHandle, int32_t relativeZ) {
    ssize_t idx = mCurrentChildren.indexOf(childLayer);
    if (idx < 0) {
        return false;
    }
    if (childLayer->setRelativeLayer(relativeToHandle, relativeZ)) {
        mCurrentChildren.removeAt(idx);
        mCurrentChildren.add(childLayer);
        return true;
    }
    return false;
}

bool Layer::setLayer(int32_t z) {
    if (mDrawingState.z == z && !usingRelativeZ(LayerVector::StateSet::Current)) return false;
    mDrawingState.sequence++;
    mDrawingState.z = z;
    mDrawingState.modified = true;

    mFlinger->mSomeChildrenChanged = true;

    // Discard all relative layering.
    if (mDrawingState.zOrderRelativeOf != nullptr) {
        sp<Layer> strongRelative = mDrawingState.zOrderRelativeOf.promote();
        if (strongRelative != nullptr) {
            strongRelative->removeZOrderRelative(this);
        }
        setZOrderRelativeOf(nullptr);
    }
    setTransactionFlags(eTransactionNeeded);
    return true;
}

void Layer::removeZOrderRelative(const wp<Layer>& relative) {
    mDrawingState.zOrderRelatives.remove(relative);
    mDrawingState.sequence++;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
}

void Layer::addZOrderRelative(const wp<Layer>& relative) {
    mDrawingState.zOrderRelatives.add(relative);
    mDrawingState.modified = true;
    mDrawingState.sequence++;
    setTransactionFlags(eTransactionNeeded);
}

void Layer::setZOrderRelativeOf(const wp<Layer>& relativeOf) {
    mDrawingState.zOrderRelativeOf = relativeOf;
    mDrawingState.sequence++;
    mDrawingState.modified = true;
    mDrawingState.isRelativeOf = relativeOf != nullptr;

    setTransactionFlags(eTransactionNeeded);
}

bool Layer::setRelativeLayer(const sp<IBinder>& relativeToHandle, int32_t relativeZ) {
    sp<Layer> relative = fromHandle(relativeToHandle).promote();
    if (relative == nullptr) {
        return false;
    }

    if (mDrawingState.z == relativeZ && usingRelativeZ(LayerVector::StateSet::Current) &&
        mDrawingState.zOrderRelativeOf == relative) {
        return false;
    }

    mFlinger->mSomeChildrenChanged = true;

    mDrawingState.sequence++;
    mDrawingState.modified = true;
    mDrawingState.z = relativeZ;

    auto oldZOrderRelativeOf = mDrawingState.zOrderRelativeOf.promote();
    if (oldZOrderRelativeOf != nullptr) {
        oldZOrderRelativeOf->removeZOrderRelative(this);
    }
    setZOrderRelativeOf(relative);
    relative->addZOrderRelative(this);

    setTransactionFlags(eTransactionNeeded);

    return true;
}

bool Layer::setTrustedOverlay(bool isTrustedOverlay) {
    if (mDrawingState.isTrustedOverlay == isTrustedOverlay) return false;
    mDrawingState.isTrustedOverlay = isTrustedOverlay;
    mDrawingState.modified = true;
    mFlinger->mInputInfoChanged = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::isTrustedOverlay() const {
    if (getDrawingState().isTrustedOverlay) {
        return true;
    }
    const auto& p = mDrawingParent.promote();
    return (p != nullptr) && p->isTrustedOverlay();
}

bool Layer::setSize(uint32_t w, uint32_t h) {
    if (mDrawingState.requested_legacy.w == w && mDrawingState.requested_legacy.h == h)
        return false;
    mDrawingState.requested_legacy.w = w;
    mDrawingState.requested_legacy.h = h;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);

    // record the new size, from this point on, when the client request
    // a buffer, it'll get the new size.
    setDefaultBufferSize(mDrawingState.requested_legacy.w, mDrawingState.requested_legacy.h);
    return true;
}

bool Layer::setAlpha(float alpha) {
    if (mDrawingState.color.a == alpha) return false;
    mDrawingState.sequence++;
    mDrawingState.color.a = alpha;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setBackgroundColor(const half3& color, float alpha, ui::Dataspace dataspace) {
    if (!mDrawingState.bgColorLayer && alpha == 0) {
        return false;
    }
    mDrawingState.sequence++;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);

    if (!mDrawingState.bgColorLayer && alpha != 0) {
        // create background color layer if one does not yet exist
        uint32_t flags = ISurfaceComposerClient::eFXSurfaceEffect;
        std::string name = mName + "BackgroundColorLayer";
        mDrawingState.bgColorLayer = mFlinger->getFactory().createEffectLayer(
                LayerCreationArgs(mFlinger.get(), nullptr, std::move(name), 0, 0, flags,
                                  LayerMetadata()));

        // add to child list
        addChild(mDrawingState.bgColorLayer);
        mFlinger->mLayersAdded = true;
        // set up SF to handle added color layer
        if (isRemovedFromCurrentState()) {
            mDrawingState.bgColorLayer->onRemovedFromCurrentState();
        }
        mFlinger->setTransactionFlags(eTransactionNeeded);
    } else if (mDrawingState.bgColorLayer && alpha == 0) {
        mDrawingState.bgColorLayer->reparent(nullptr);
        mDrawingState.bgColorLayer = nullptr;
        return true;
    }

    mDrawingState.bgColorLayer->setColor(color);
    mDrawingState.bgColorLayer->setLayer(std::numeric_limits<int32_t>::min());
    mDrawingState.bgColorLayer->setAlpha(alpha);
    mDrawingState.bgColorLayer->setDataspace(dataspace);

    return true;
}

bool Layer::setCornerRadius(float cornerRadius) {
    if (mDrawingState.cornerRadius == cornerRadius) return false;

    mDrawingState.sequence++;
    mDrawingState.cornerRadius = cornerRadius;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setBackgroundBlurRadius(int backgroundBlurRadius) {
    if (mDrawingState.backgroundBlurRadius == backgroundBlurRadius) return false;

    mDrawingState.sequence++;
    mDrawingState.backgroundBlurRadius = backgroundBlurRadius;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setMatrix(const layer_state_t::matrix22_t& matrix,
        bool allowNonRectPreservingTransforms) {
    ui::Transform t;
    t.set(matrix.dsdx, matrix.dtdy, matrix.dtdx, matrix.dsdy);

    if (!allowNonRectPreservingTransforms && !t.preserveRects()) {
        ALOGW("Attempt to set rotation matrix without permission ACCESS_SURFACE_FLINGER nor "
              "ROTATE_SURFACE_FLINGER ignored");
        return false;
    }
    mDrawingState.sequence++;
    mDrawingState.transform.set(matrix.dsdx, matrix.dtdy, matrix.dtdx, matrix.dsdy);
    mDrawingState.modified = true;

    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setTransparentRegionHint(const Region& transparent) {
    mDrawingState.requestedTransparentRegion_legacy = transparent;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setBlurRegions(const std::vector<BlurRegion>& blurRegions) {
    mDrawingState.blurRegions = blurRegions;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setFlags(uint32_t flags, uint32_t mask) {
    const uint32_t newFlags = (mDrawingState.flags & ~mask) | (flags & mask);
    if (mDrawingState.flags == newFlags) return false;
    mDrawingState.sequence++;
    mDrawingState.flags = newFlags;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setCrop(const Rect& crop) {
    if (mDrawingState.requestedCrop == crop) return false;
    mDrawingState.sequence++;
    mDrawingState.requestedCrop = crop;
    mDrawingState.crop = crop;

    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setMetadata(const LayerMetadata& data) {
    if (!mDrawingState.metadata.merge(data, true /* eraseEmpty */)) return false;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setLayerStack(uint32_t layerStack) {
    if (mDrawingState.layerStack == layerStack) return false;
    mDrawingState.sequence++;
    mDrawingState.layerStack = layerStack;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setColorSpaceAgnostic(const bool agnostic) {
    if (mDrawingState.colorSpaceAgnostic == agnostic) {
        return false;
    }
    mDrawingState.sequence++;
    mDrawingState.colorSpaceAgnostic = agnostic;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setFrameRateSelectionPriority(int32_t priority) {
    if (mDrawingState.frameRateSelectionPriority == priority) return false;
    mDrawingState.frameRateSelectionPriority = priority;
    mDrawingState.sequence++;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

int32_t Layer::getFrameRateSelectionPriority() const {
    // Check if layer has priority set.
    if (mDrawingState.frameRateSelectionPriority != PRIORITY_UNSET) {
        return mDrawingState.frameRateSelectionPriority;
    }
    // If not, search whether its parents have it set.
    sp<Layer> parent = getParent();
    if (parent != nullptr) {
        return parent->getFrameRateSelectionPriority();
    }

    return Layer::PRIORITY_UNSET;
}

bool Layer::isLayerFocusedBasedOnPriority(int32_t priority) {
    return priority == PRIORITY_FOCUSED_WITH_MODE || priority == PRIORITY_FOCUSED_WITHOUT_MODE;
};

uint32_t Layer::getLayerStack() const {
    auto p = mDrawingParent.promote();
    if (p == nullptr) {
        return getDrawingState().layerStack;
    }
    return p->getLayerStack();
}

bool Layer::setShadowRadius(float shadowRadius) {
    if (mDrawingState.shadowRadius == shadowRadius) {
        return false;
    }

    mDrawingState.sequence++;
    mDrawingState.shadowRadius = shadowRadius;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setFixedTransformHint(ui::Transform::RotationFlags fixedTransformHint) {
    if (mDrawingState.fixedTransformHint == fixedTransformHint) {
        return false;
    }

    mDrawingState.sequence++;
    mDrawingState.fixedTransformHint = fixedTransformHint;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

bool Layer::setStretchEffect(const StretchEffect& effect) {
    StretchEffect temp = effect;
    temp.sanitize();
    if (mDrawingState.stretchEffect == temp) {
        return false;
    }
    mDrawingState.sequence++;
    mDrawingState.stretchEffect = temp;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

StretchEffect Layer::getStretchEffect() const {
    if (mDrawingState.stretchEffect.hasEffect()) {
        return mDrawingState.stretchEffect;
    }

    sp<Layer> parent = getParent();
    if (parent != nullptr) {
        auto effect = parent->getStretchEffect();
        if (effect.hasEffect()) {
            // TODO(b/179047472): Map it? Or do we make the effect be in global space?
            return effect;
        }
    }
    return StretchEffect{};
}

bool Layer::propagateFrameRateForLayerTree(FrameRate parentFrameRate, bool* transactionNeeded) {
    // The frame rate for layer tree is this layer's frame rate if present, or the parent frame rate
    const auto frameRate = [&] {
        if (mDrawingState.frameRate.rate.isValid() ||
            mDrawingState.frameRate.type == FrameRateCompatibility::NoVote) {
            return mDrawingState.frameRate;
        }

        return parentFrameRate;
    }();

    *transactionNeeded |= setFrameRateForLayerTree(frameRate);

    // The frame rate is propagated to the children
    bool childrenHaveFrameRate = false;
    for (const sp<Layer>& child : mCurrentChildren) {
        childrenHaveFrameRate |=
                child->propagateFrameRateForLayerTree(frameRate, transactionNeeded);
    }

    // If we don't have a valid frame rate, but the children do, we set this
    // layer as NoVote to allow the children to control the refresh rate
    if (!frameRate.rate.isValid() && frameRate.type != FrameRateCompatibility::NoVote &&
        childrenHaveFrameRate) {
        *transactionNeeded |=
                setFrameRateForLayerTree(FrameRate(Fps(0.0f), FrameRateCompatibility::NoVote));
    }

    // We return whether this layer ot its children has a vote. We ignore ExactOrMultiple votes for
    // the same reason we are allowing touch boost for those layers. See
    // RefreshRateConfigs::getBestRefreshRate for more details.
    const auto layerVotedWithDefaultCompatibility =
            frameRate.rate.isValid() && frameRate.type == FrameRateCompatibility::Default;
    const auto layerVotedWithNoVote = frameRate.type == FrameRateCompatibility::NoVote;
    const auto layerVotedWithExactCompatibility =
            frameRate.rate.isValid() && frameRate.type == FrameRateCompatibility::Exact;
    return layerVotedWithDefaultCompatibility || layerVotedWithNoVote ||
            layerVotedWithExactCompatibility || childrenHaveFrameRate;
}

void Layer::updateTreeHasFrameRateVote() {
    const auto root = [&]() -> sp<Layer> {
        sp<Layer> layer = this;
        while (auto parent = layer->getParent()) {
            layer = parent;
        }
        return layer;
    }();

    bool transactionNeeded = false;
    root->propagateFrameRateForLayerTree({}, &transactionNeeded);

    // TODO(b/195668952): we probably don't need eTraversalNeeded here
    if (transactionNeeded) {
        mFlinger->setTransactionFlags(eTraversalNeeded);
    }
}

bool Layer::setFrameRate(FrameRate frameRate) {
    if (!mFlinger->useFrameRateApi) {
        return false;
    }
    if (mDrawingState.frameRate == frameRate) {
        return false;
    }

    mDrawingState.sequence++;
    mDrawingState.frameRate = frameRate;
    mDrawingState.modified = true;

    updateTreeHasFrameRateVote();

    setTransactionFlags(eTransactionNeeded);
    return true;
}

void Layer::setFrameTimelineVsyncForBufferTransaction(const FrameTimelineInfo& info,
                                                      nsecs_t postTime) {
    mDrawingState.postTime = postTime;

    // Check if one of the bufferlessSurfaceFramesTX contains the same vsyncId. This can happen if
    // there are two transactions with the same token, the first one without a buffer and the
    // second one with a buffer. We promote the bufferlessSurfaceFrame to a bufferSurfaceFrameTX
    // in that case.
    auto it = mDrawingState.bufferlessSurfaceFramesTX.find(info.vsyncId);
    if (it != mDrawingState.bufferlessSurfaceFramesTX.end()) {
        // Promote the bufferlessSurfaceFrame to a bufferSurfaceFrameTX
        mDrawingState.bufferSurfaceFrameTX = it->second;
        mDrawingState.bufferlessSurfaceFramesTX.erase(it);
        mDrawingState.bufferSurfaceFrameTX->promoteToBuffer();
        mDrawingState.bufferSurfaceFrameTX->setActualQueueTime(postTime);
    } else {
        mDrawingState.bufferSurfaceFrameTX =
                createSurfaceFrameForBuffer(info, postTime, mTransactionName);
    }
}

void Layer::setFrameTimelineVsyncForBufferlessTransaction(const FrameTimelineInfo& info,
                                                          nsecs_t postTime) {
    mDrawingState.frameTimelineInfo = info;
    mDrawingState.postTime = postTime;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);

    if (const auto& bufferSurfaceFrameTX = mDrawingState.bufferSurfaceFrameTX;
        bufferSurfaceFrameTX != nullptr) {
        if (bufferSurfaceFrameTX->getToken() == info.vsyncId) {
            // BufferSurfaceFrame takes precedence over BufferlessSurfaceFrame. If the same token is
            // being used for BufferSurfaceFrame, don't create a new one.
            return;
        }
    }
    // For Transactions without a buffer, we create only one SurfaceFrame per vsyncId. If multiple
    // transactions use the same vsyncId, we just treat them as one SurfaceFrame (unless they are
    // targeting different vsyncs).
    auto it = mDrawingState.bufferlessSurfaceFramesTX.find(info.vsyncId);
    if (it == mDrawingState.bufferlessSurfaceFramesTX.end()) {
        auto surfaceFrame = createSurfaceFrameForTransaction(info, postTime);
        mDrawingState.bufferlessSurfaceFramesTX[info.vsyncId] = surfaceFrame;
    } else {
        if (it->second->getPresentState() == PresentState::Presented) {
            // If the SurfaceFrame was already presented, its safe to overwrite it since it must
            // have been from previous vsync.
            it->second = createSurfaceFrameForTransaction(info, postTime);
        }
    }
}

void Layer::addSurfaceFrameDroppedForBuffer(
        std::shared_ptr<frametimeline::SurfaceFrame>& surfaceFrame) {
    surfaceFrame->setDropTime(systemTime());
    surfaceFrame->setPresentState(PresentState::Dropped);
    mFlinger->mFrameTimeline->addSurfaceFrame(surfaceFrame);
}

void Layer::addSurfaceFramePresentedForBuffer(
        std::shared_ptr<frametimeline::SurfaceFrame>& surfaceFrame, nsecs_t acquireFenceTime,
        nsecs_t currentLatchTime) {
    surfaceFrame->setAcquireFenceTime(acquireFenceTime);
    surfaceFrame->setPresentState(PresentState::Presented, mLastLatchTime);
    mFlinger->mFrameTimeline->addSurfaceFrame(surfaceFrame);
    mLastLatchTime = currentLatchTime;
}

std::shared_ptr<frametimeline::SurfaceFrame> Layer::createSurfaceFrameForTransaction(
        const FrameTimelineInfo& info, nsecs_t postTime) {
    auto surfaceFrame =
            mFlinger->mFrameTimeline->createSurfaceFrameForToken(info, mOwnerPid, mOwnerUid,
                                                                 getSequence(), mName,
                                                                 mTransactionName,
                                                                 /*isBuffer*/ false, getGameMode());
    // For Transactions, the post time is considered to be both queue and acquire fence time.
    surfaceFrame->setActualQueueTime(postTime);
    surfaceFrame->setAcquireFenceTime(postTime);
    const auto fps = mFlinger->mScheduler->getFrameRateOverride(getOwnerUid());
    if (fps) {
        surfaceFrame->setRenderRate(*fps);
    }
    onSurfaceFrameCreated(surfaceFrame);
    return surfaceFrame;
}

std::shared_ptr<frametimeline::SurfaceFrame> Layer::createSurfaceFrameForBuffer(
        const FrameTimelineInfo& info, nsecs_t queueTime, std::string debugName) {
    auto surfaceFrame =
            mFlinger->mFrameTimeline->createSurfaceFrameForToken(info, mOwnerPid, mOwnerUid,
                                                                 getSequence(), mName, debugName,
                                                                 /*isBuffer*/ true, getGameMode());
    // For buffers, acquire fence time will set during latch.
    surfaceFrame->setActualQueueTime(queueTime);
    const auto fps = mFlinger->mScheduler->getFrameRateOverride(getOwnerUid());
    if (fps) {
        surfaceFrame->setRenderRate(*fps);
    }
    // TODO(b/178542907): Implement onSurfaceFrameCreated for BQLayer as well.
    onSurfaceFrameCreated(surfaceFrame);
    return surfaceFrame;
}

bool Layer::setFrameRateForLayerTree(FrameRate frameRate) {
    if (mDrawingState.frameRateForLayerTree == frameRate) {
        return false;
    }

    mDrawingState.frameRateForLayerTree = frameRate;

    // TODO(b/195668952): we probably don't need to dirty visible regions here
    // or even store frameRateForLayerTree in mDrawingState
    mDrawingState.sequence++;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);

    mFlinger->mScheduler->recordLayerHistory(this, systemTime(),
                                             LayerHistory::LayerUpdateType::SetFrameRate);

    return true;
}

Layer::FrameRate Layer::getFrameRateForLayerTree() const {
    return getDrawingState().frameRateForLayerTree;
}

bool Layer::isHiddenByPolicy() const {
    const State& s(mDrawingState);
    const auto& parent = mDrawingParent.promote();
    if (parent != nullptr && parent->isHiddenByPolicy()) {
        return true;
    }
    if (usingRelativeZ(LayerVector::StateSet::Drawing)) {
        auto zOrderRelativeOf = mDrawingState.zOrderRelativeOf.promote();
        if (zOrderRelativeOf != nullptr) {
            if (zOrderRelativeOf->isHiddenByPolicy()) {
                return true;
            }
        }
    }
    return s.flags & layer_state_t::eLayerHidden;
}

uint32_t Layer::getEffectiveUsage(uint32_t usage) const {
    // TODO: should we do something special if mSecure is set?
    if (mProtectedByApp) {
        // need a hardware-protected path to external video sink
        usage |= GraphicBuffer::USAGE_PROTECTED;
    }
    if (mPotentialCursor) {
        usage |= GraphicBuffer::USAGE_CURSOR;
    }
    usage |= GraphicBuffer::USAGE_HW_COMPOSER;
    return usage;
}

void Layer::updateTransformHint(ui::Transform::RotationFlags transformHint) {
    if (mFlinger->mDebugDisableTransformHint || transformHint & ui::Transform::ROT_INVALID) {
        transformHint = ui::Transform::ROT_0;
    }

    setTransformHint(transformHint);
}

// ----------------------------------------------------------------------------
// debugging
// ----------------------------------------------------------------------------

// TODO(marissaw): add new layer state info to layer debugging
LayerDebugInfo Layer::getLayerDebugInfo(const DisplayDevice* display) const {
    using namespace std::string_literals;

    LayerDebugInfo info;
    const State& ds = getDrawingState();
    info.mName = getName();
    sp<Layer> parent = mDrawingParent.promote();
    info.mParentName = parent ? parent->getName() : "none"s;
    info.mType = getType();
    info.mTransparentRegion = ds.activeTransparentRegion_legacy;

    info.mVisibleRegion = getVisibleRegion(display);
    info.mSurfaceDamageRegion = surfaceDamageRegion;
    info.mLayerStack = getLayerStack();
    info.mX = ds.transform.tx();
    info.mY = ds.transform.ty();
    info.mZ = ds.z;
    info.mWidth = ds.width;
    info.mHeight = ds.height;
    info.mCrop = ds.crop;
    info.mColor = ds.color;
    info.mFlags = ds.flags;
    info.mPixelFormat = getPixelFormat();
    info.mDataSpace = static_cast<android_dataspace>(getDataSpace());
    info.mMatrix[0][0] = ds.transform[0][0];
    info.mMatrix[0][1] = ds.transform[0][1];
    info.mMatrix[1][0] = ds.transform[1][0];
    info.mMatrix[1][1] = ds.transform[1][1];
    {
        sp<const GraphicBuffer> buffer = getBuffer();
        if (buffer != 0) {
            info.mActiveBufferWidth = buffer->getWidth();
            info.mActiveBufferHeight = buffer->getHeight();
            info.mActiveBufferStride = buffer->getStride();
            info.mActiveBufferFormat = buffer->format;
        } else {
            info.mActiveBufferWidth = 0;
            info.mActiveBufferHeight = 0;
            info.mActiveBufferStride = 0;
            info.mActiveBufferFormat = 0;
        }
    }
    info.mNumQueuedFrames = getQueuedFrameCount();
    info.mRefreshPending = isBufferLatched();
    info.mIsOpaque = isOpaque(ds);
    info.mContentDirty = contentDirty;
    info.mStretchEffect = getStretchEffect();
    return info;
}

void Layer::miniDumpHeader(std::string& result) {
    result.append(kDumpTableRowLength, '-');
    result.append("\n");
    result.append(" Layer name\n");
    result.append("           Z | ");
    result.append(" Window Type | ");
    result.append(" Comp Type | ");
    result.append(" Transform | ");
    result.append("  Disp Frame (LTRB) | ");
    result.append("         Source Crop (LTRB) | ");
    result.append("    Frame Rate (Explicit) (Seamlessness) [Focused]\n");
    result.append(kDumpTableRowLength, '-');
    result.append("\n");
}

std::string Layer::frameRateCompatibilityString(Layer::FrameRateCompatibility compatibility) {
    switch (compatibility) {
        case FrameRateCompatibility::Default:
            return "Default";
        case FrameRateCompatibility::ExactOrMultiple:
            return "ExactOrMultiple";
        case FrameRateCompatibility::NoVote:
            return "NoVote";
        case FrameRateCompatibility::Exact:
            return "Exact";
    }
}

void Layer::miniDump(std::string& result, const DisplayDevice& display) const {
    const auto outputLayer = findOutputLayerForDisplay(&display);
    if (!outputLayer) {
        return;
    }

    std::string name;
    if (mName.length() > 77) {
        std::string shortened;
        shortened.append(mName, 0, 36);
        shortened.append("[...]");
        shortened.append(mName, mName.length() - 36);
        name = std::move(shortened);
    } else {
        name = mName;
    }

    StringAppendF(&result, " %s\n", name.c_str());

    const State& layerState(getDrawingState());
    const auto& outputLayerState = outputLayer->getState();

    if (layerState.zOrderRelativeOf != nullptr || mDrawingParent != nullptr) {
        StringAppendF(&result, "  rel %6d | ", layerState.z);
    } else {
        StringAppendF(&result, "  %10d | ", layerState.z);
    }
    StringAppendF(&result, "  %10d | ", mWindowType);
    StringAppendF(&result, "%10s | ", toString(getCompositionType(display)).c_str());
    StringAppendF(&result, "%10s | ", toString(outputLayerState.bufferTransform).c_str());
    const Rect& frame = outputLayerState.displayFrame;
    StringAppendF(&result, "%4d %4d %4d %4d | ", frame.left, frame.top, frame.right, frame.bottom);
    const FloatRect& crop = outputLayerState.sourceCrop;
    StringAppendF(&result, "%6.1f %6.1f %6.1f %6.1f | ", crop.left, crop.top, crop.right,
                  crop.bottom);
    const auto frameRate = getFrameRateForLayerTree();
    if (frameRate.rate.isValid() || frameRate.type != FrameRateCompatibility::Default) {
        StringAppendF(&result, "%s %15s %17s", to_string(frameRate.rate).c_str(),
                      frameRateCompatibilityString(frameRate.type).c_str(),
                      toString(frameRate.seamlessness).c_str());
    } else {
        result.append(41, ' ');
    }

    const auto focused = isLayerFocusedBasedOnPriority(getFrameRateSelectionPriority());
    StringAppendF(&result, "    [%s]\n", focused ? "*" : " ");

    result.append(kDumpTableRowLength, '-');
    result.append("\n");
}

void Layer::dumpFrameStats(std::string& result) const {
    mFrameTracker.dumpStats(result);
}

void Layer::clearFrameStats() {
    mFrameTracker.clearStats();
}

void Layer::logFrameStats() {
    mFrameTracker.logAndResetStats(mName);
}

void Layer::getFrameStats(FrameStats* outStats) const {
    mFrameTracker.getStats(outStats);
}

void Layer::dumpFrameEvents(std::string& result) {
    StringAppendF(&result, "- Layer %s (%s, %p)\n", getName().c_str(), getType(), this);
    Mutex::Autolock lock(mFrameEventHistoryMutex);
    mFrameEventHistory.checkFencesForCompletion();
    mFrameEventHistory.dump(result);
}

void Layer::dumpCallingUidPid(std::string& result) const {
    StringAppendF(&result, "Layer %s (%s) callingPid:%d callingUid:%d ownerUid:%d\n",
                  getName().c_str(), getType(), mCallingPid, mCallingUid, mOwnerUid);
}

void Layer::onDisconnect() {
    Mutex::Autolock lock(mFrameEventHistoryMutex);
    mFrameEventHistory.onDisconnect();
    const int32_t layerId = getSequence();
    mFlinger->mTimeStats->onDestroy(layerId);
    mFlinger->mFrameTracer->onDestroy(layerId);
}

void Layer::addAndGetFrameTimestamps(const NewFrameEventsEntry* newTimestamps,
                                     FrameEventHistoryDelta* outDelta) {
    if (newTimestamps) {
        mFlinger->mTimeStats->setPostTime(getSequence(), newTimestamps->frameNumber,
                                          getName().c_str(), mOwnerUid, newTimestamps->postedTime,
                                          getGameMode());
        mFlinger->mTimeStats->setAcquireFence(getSequence(), newTimestamps->frameNumber,
                                              newTimestamps->acquireFence);
    }

    Mutex::Autolock lock(mFrameEventHistoryMutex);
    if (newTimestamps) {
        // If there are any unsignaled fences in the aquire timeline at this
        // point, the previously queued frame hasn't been latched yet. Go ahead
        // and try to get the signal time here so the syscall is taken out of
        // the main thread's critical path.
        mAcquireTimeline.updateSignalTimes();
        // Push the new fence after updating since it's likely still pending.
        mAcquireTimeline.push(newTimestamps->acquireFence);
        mFrameEventHistory.addQueue(*newTimestamps);
    }

    if (outDelta) {
        mFrameEventHistory.getAndResetDelta(outDelta);
    }
}

size_t Layer::getChildrenCount() const {
    size_t count = 0;
    for (const sp<Layer>& child : mCurrentChildren) {
        count += 1 + child->getChildrenCount();
    }
    return count;
}

void Layer::setGameModeForTree(int parentGameMode) {
    int gameMode = parentGameMode;
    auto& currentState = getDrawingState();
    if (currentState.metadata.has(METADATA_GAME_MODE)) {
        gameMode = currentState.metadata.getInt32(METADATA_GAME_MODE, 0);
    }
    setGameMode(gameMode);
    for (const sp<Layer>& child : mCurrentChildren) {
        child->setGameModeForTree(gameMode);
    }
}

void Layer::addChild(const sp<Layer>& layer) {
    mFlinger->mSomeChildrenChanged = true;
    setTransactionFlags(eTransactionNeeded);

    mCurrentChildren.add(layer);
    layer->setParent(this);
    layer->setGameModeForTree(mGameMode);
    updateTreeHasFrameRateVote();
}

ssize_t Layer::removeChild(const sp<Layer>& layer) {
    mFlinger->mSomeChildrenChanged = true;
    setTransactionFlags(eTransactionNeeded);

    layer->setParent(nullptr);
    const auto removeResult = mCurrentChildren.remove(layer);

    updateTreeHasFrameRateVote();
    layer->setGameModeForTree(0);
    layer->updateTreeHasFrameRateVote();

    return removeResult;
}

void Layer::setChildrenDrawingParent(const sp<Layer>& newParent) {
    for (const sp<Layer>& child : mDrawingChildren) {
        child->mDrawingParent = newParent;
        child->computeBounds(newParent->mBounds, newParent->mEffectiveTransform,
                             newParent->mEffectiveShadowRadius);
    }
}

bool Layer::reparent(const sp<IBinder>& newParentHandle) {
    sp<Layer> newParent;
    if (newParentHandle != nullptr) {
        newParent = fromHandle(newParentHandle).promote();
        if (newParent == nullptr) {
            ALOGE("Unable to promote Layer handle");
            return false;
        }
        if (newParent == this) {
            ALOGE("Invalid attempt to reparent Layer (%s) to itself", getName().c_str());
            return false;
        }
    }

    sp<Layer> parent = getParent();
    if (parent != nullptr) {
        parent->removeChild(this);
    }

    if (newParentHandle != nullptr) {
        newParent->addChild(this);
        if (!newParent->isRemovedFromCurrentState()) {
            addToCurrentState();
        } else {
            onRemovedFromCurrentState();
        }
    } else {
        onRemovedFromCurrentState();
    }

    return true;
}

bool Layer::setColorTransform(const mat4& matrix) {
    static const mat4 identityMatrix = mat4();

    if (mDrawingState.colorTransform == matrix) {
        return false;
    }
    ++mDrawingState.sequence;
    mDrawingState.colorTransform = matrix;
    mDrawingState.hasColorTransform = matrix != identityMatrix;
    mDrawingState.modified = true;
    setTransactionFlags(eTransactionNeeded);
    return true;
}

mat4 Layer::getColorTransform() const {
    mat4 colorTransform = mat4(getDrawingState().colorTransform);
    if (sp<Layer> parent = mDrawingParent.promote(); parent != nullptr) {
        colorTransform = parent->getColorTransform() * colorTransform;
    }
    return colorTransform;
}

bool Layer::hasColorTransform() const {
    bool hasColorTransform = getDrawingState().hasColorTransform;
    if (sp<Layer> parent = mDrawingParent.promote(); parent != nullptr) {
        hasColorTransform = hasColorTransform || parent->hasColorTransform();
    }
    return hasColorTransform;
}

bool Layer::isLegacyDataSpace() const {
    // return true when no higher bits are set
    return !(getDataSpace() &
             (ui::Dataspace::STANDARD_MASK | ui::Dataspace::TRANSFER_MASK |
              ui::Dataspace::RANGE_MASK));
}

void Layer::setParent(const sp<Layer>& layer) {
    mCurrentParent = layer;
}

int32_t Layer::getZ(LayerVector::StateSet) const {
    return mDrawingState.z;
}

bool Layer::usingRelativeZ(LayerVector::StateSet stateSet) const {
    const bool useDrawing = stateSet == LayerVector::StateSet::Drawing;
    const State& state = useDrawing ? mDrawingState : mDrawingState;
    return state.isRelativeOf;
}

__attribute__((no_sanitize("unsigned-integer-overflow"))) LayerVector Layer::makeTraversalList(
        LayerVector::StateSet stateSet, bool* outSkipRelativeZUsers) {
    LOG_ALWAYS_FATAL_IF(stateSet == LayerVector::StateSet::Invalid,
                        "makeTraversalList received invalid stateSet");
    const bool useDrawing = stateSet == LayerVector::StateSet::Drawing;
    const LayerVector& children = useDrawing ? mDrawingChildren : mCurrentChildren;
    const State& state = useDrawing ? mDrawingState : mDrawingState;

    if (state.zOrderRelatives.size() == 0) {
        *outSkipRelativeZUsers = true;
        return children;
    }

    LayerVector traverse(stateSet);
    for (const wp<Layer>& weakRelative : state.zOrderRelatives) {
        sp<Layer> strongRelative = weakRelative.promote();
        if (strongRelative != nullptr) {
            traverse.add(strongRelative);
        }
    }

    for (const sp<Layer>& child : children) {
        if (child->usingRelativeZ(stateSet)) {
            continue;
        }
        traverse.add(child);
    }

    return traverse;
}

/**
 * Negatively signed relatives are before 'this' in Z-order.
 */
void Layer::traverseInZOrder(LayerVector::StateSet stateSet, const LayerVector::Visitor& visitor) {
    // In the case we have other layers who are using a relative Z to us, makeTraversalList will
    // produce a new list for traversing, including our relatives, and not including our children
    // who are relatives of another surface. In the case that there are no relative Z,
    // makeTraversalList returns our children directly to avoid significant overhead.
    // However in this case we need to take the responsibility for filtering children which
    // are relatives of another surface here.
    bool skipRelativeZUsers = false;
    const LayerVector list = makeTraversalList(stateSet, &skipRelativeZUsers);

    size_t i = 0;
    for (; i < list.size(); i++) {
        const auto& relative = list[i];
        if (skipRelativeZUsers && relative->usingRelativeZ(stateSet)) {
            continue;
        }

        if (relative->getZ(stateSet) >= 0) {
            break;
        }
        relative->traverseInZOrder(stateSet, visitor);
    }

    visitor(this);
    for (; i < list.size(); i++) {
        const auto& relative = list[i];

        if (skipRelativeZUsers && relative->usingRelativeZ(stateSet)) {
            continue;
        }
        relative->traverseInZOrder(stateSet, visitor);
    }
}

/**
 * Positively signed relatives are before 'this' in reverse Z-order.
 */
void Layer::traverseInReverseZOrder(LayerVector::StateSet stateSet,
                                    const LayerVector::Visitor& visitor) {
    // See traverseInZOrder for documentation.
    bool skipRelativeZUsers = false;
    LayerVector list = makeTraversalList(stateSet, &skipRelativeZUsers);

    int32_t i = 0;
    for (i = int32_t(list.size()) - 1; i >= 0; i--) {
        const auto& relative = list[i];

        if (skipRelativeZUsers && relative->usingRelativeZ(stateSet)) {
            continue;
        }

        if (relative->getZ(stateSet) < 0) {
            break;
        }
        relative->traverseInReverseZOrder(stateSet, visitor);
    }
    visitor(this);
    for (; i >= 0; i--) {
        const auto& relative = list[i];

        if (skipRelativeZUsers && relative->usingRelativeZ(stateSet)) {
            continue;
        }

        relative->traverseInReverseZOrder(stateSet, visitor);
    }
}

void Layer::traverse(LayerVector::StateSet state, const LayerVector::Visitor& visitor) {
    visitor(this);
    const LayerVector& children =
          state == LayerVector::StateSet::Drawing ? mDrawingChildren : mCurrentChildren;
    for (const sp<Layer>& child : children) {
        child->traverse(state, visitor);
    }
}

LayerVector Layer::makeChildrenTraversalList(LayerVector::StateSet stateSet,
                                             const std::vector<Layer*>& layersInTree) {
    LOG_ALWAYS_FATAL_IF(stateSet == LayerVector::StateSet::Invalid,
                        "makeTraversalList received invalid stateSet");
    const bool useDrawing = stateSet == LayerVector::StateSet::Drawing;
    const LayerVector& children = useDrawing ? mDrawingChildren : mCurrentChildren;
    const State& state = useDrawing ? mDrawingState : mDrawingState;

    LayerVector traverse(stateSet);
    for (const wp<Layer>& weakRelative : state.zOrderRelatives) {
        sp<Layer> strongRelative = weakRelative.promote();
        // Only add relative layers that are also descendents of the top most parent of the tree.
        // If a relative layer is not a descendent, then it should be ignored.
        if (std::binary_search(layersInTree.begin(), layersInTree.end(), strongRelative.get())) {
            traverse.add(strongRelative);
        }
    }

    for (const sp<Layer>& child : children) {
        const State& childState = useDrawing ? child->mDrawingState : child->mDrawingState;
        // If a layer has a relativeOf layer, only ignore if the layer it's relative to is a
        // descendent of the top most parent of the tree. If it's not a descendent, then just add
        // the child here since it won't be added later as a relative.
        if (std::binary_search(layersInTree.begin(), layersInTree.end(),
                               childState.zOrderRelativeOf.promote().get())) {
            continue;
        }
        traverse.add(child);
    }

    return traverse;
}

void Layer::traverseChildrenInZOrderInner(const std::vector<Layer*>& layersInTree,
                                          LayerVector::StateSet stateSet,
                                          const LayerVector::Visitor& visitor) {
    const LayerVector list = makeChildrenTraversalList(stateSet, layersInTree);

    size_t i = 0;
    for (; i < list.size(); i++) {
        const auto& relative = list[i];
        if (relative->getZ(stateSet) >= 0) {
            break;
        }
        relative->traverseChildrenInZOrderInner(layersInTree, stateSet, visitor);
    }

    visitor(this);
    for (; i < list.size(); i++) {
        const auto& relative = list[i];
        relative->traverseChildrenInZOrderInner(layersInTree, stateSet, visitor);
    }
}

std::vector<Layer*> Layer::getLayersInTree(LayerVector::StateSet stateSet) {
    const bool useDrawing = stateSet == LayerVector::StateSet::Drawing;
    const LayerVector& children = useDrawing ? mDrawingChildren : mCurrentChildren;

    std::vector<Layer*> layersInTree = {this};
    for (size_t i = 0; i < children.size(); i++) {
        const auto& child = children[i];
        std::vector<Layer*> childLayers = child->getLayersInTree(stateSet);
        layersInTree.insert(layersInTree.end(), childLayers.cbegin(), childLayers.cend());
    }

    return layersInTree;
}

void Layer::traverseChildrenInZOrder(LayerVector::StateSet stateSet,
                                     const LayerVector::Visitor& visitor) {
    std::vector<Layer*> layersInTree = getLayersInTree(stateSet);
    std::sort(layersInTree.begin(), layersInTree.end());
    traverseChildrenInZOrderInner(layersInTree, stateSet, visitor);
}

ui::Transform Layer::getTransform() const {
    return mEffectiveTransform;
}

half Layer::getAlpha() const {
    const auto& p = mDrawingParent.promote();

    half parentAlpha = (p != nullptr) ? p->getAlpha() : 1.0_hf;
    return parentAlpha * getDrawingState().color.a;
}

ui::Transform::RotationFlags Layer::getFixedTransformHint() const {
    ui::Transform::RotationFlags fixedTransformHint = mDrawingState.fixedTransformHint;
    if (fixedTransformHint != ui::Transform::ROT_INVALID) {
        return fixedTransformHint;
    }
    const auto& p = mCurrentParent.promote();
    if (!p) return fixedTransformHint;
    return p->getFixedTransformHint();
}

half4 Layer::getColor() const {
    const half4 color(getDrawingState().color);
    return half4(color.r, color.g, color.b, getAlpha());
}

int32_t Layer::getBackgroundBlurRadius() const {
    const auto& p = mDrawingParent.promote();

    half parentAlpha = (p != nullptr) ? p->getAlpha() : 1.0_hf;
    return parentAlpha * getDrawingState().backgroundBlurRadius;
}

const std::vector<BlurRegion> Layer::getBlurRegions() const {
    auto regionsCopy(getDrawingState().blurRegions);
    float layerAlpha = getAlpha();
    for (auto& region : regionsCopy) {
        region.alpha = region.alpha * layerAlpha;
    }
    return regionsCopy;
}

Layer::RoundedCornerState Layer::getRoundedCornerState() const {
    const auto& p = mDrawingParent.promote();
    if (p != nullptr) {
        RoundedCornerState parentState = p->getRoundedCornerState();
        if (parentState.radius > 0) {
            ui::Transform t = getActiveTransform(getDrawingState());
            t = t.inverse();
            parentState.cropRect = t.transform(parentState.cropRect);
            // The rounded corners shader only accepts 1 corner radius for performance reasons,
            // but a transform matrix can define horizontal and vertical scales.
            // Let's take the average between both of them and pass into the shader, practically we
            // never do this type of transformation on windows anyway.
            auto scaleX = sqrtf(t[0][0] * t[0][0] + t[0][1] * t[0][1]);
            auto scaleY = sqrtf(t[1][0] * t[1][0] + t[1][1] * t[1][1]);
            parentState.radius *= (scaleX + scaleY) / 2.0f;
            return parentState;
        }
    }
    const float radius = getDrawingState().cornerRadius;
    return radius > 0 && getCroppedBufferSize(getDrawingState()).isValid()
            ? RoundedCornerState(getCroppedBufferSize(getDrawingState()).toFloatRect(), radius)
            : RoundedCornerState();
}

void Layer::prepareShadowClientComposition(LayerFE::LayerSettings& caster,
                                           const Rect& layerStackRect) {
    renderengine::ShadowSettings state = mFlinger->mDrawingState.globalShadowSettings;

    // Note: this preserves existing behavior of shadowing the entire layer and not cropping it if
    // transparent regions are present. This may not be necessary since shadows are only cast by
    // SurfaceFlinger's EffectLayers, which do not typically use transparent regions.
    state.boundaries = mBounds;

    // Shift the spot light x-position to the middle of the display and then
    // offset it by casting layer's screen pos.
    state.lightPos.x = (layerStackRect.width() / 2.f) - mScreenBounds.left;
    state.lightPos.y -= mScreenBounds.top;

    state.length = mEffectiveShadowRadius;

    if (state.length > 0.f) {
        const float casterAlpha = caster.alpha;
        const bool casterIsOpaque =
                ((caster.source.buffer.buffer != nullptr) && caster.source.buffer.isOpaque);

        // If the casting layer is translucent, we need to fill in the shadow underneath the layer.
        // Otherwise the generated shadow will only be shown around the casting layer.
        state.casterIsTranslucent = !casterIsOpaque || (casterAlpha < 1.0f);
        state.ambientColor *= casterAlpha;
        state.spotColor *= casterAlpha;

        if (state.ambientColor.a > 0.f && state.spotColor.a > 0.f) {
            caster.shadow = state;
        }
    }
}

void Layer::commitChildList() {
    for (size_t i = 0; i < mCurrentChildren.size(); i++) {
        const auto& child = mCurrentChildren[i];
        child->commitChildList();
    }
    mDrawingChildren = mCurrentChildren;
    mDrawingParent = mCurrentParent;
}


void Layer::setInputInfo(const WindowInfo& info) {
    mDrawingState.inputInfo = info;
    mDrawingState.touchableRegionCrop = fromHandle(info.touchableRegionCropHandle.promote());
    mDrawingState.modified = true;
    mFlinger->mInputInfoChanged = true;
    setTransactionFlags(eTransactionNeeded);
}

LayerProto* Layer::writeToProto(LayersProto& layersProto, uint32_t traceFlags,
                                const DisplayDevice* display) {
    LayerProto* layerProto = layersProto.add_layers();
    writeToProtoDrawingState(layerProto, traceFlags, display);
    writeToProtoCommonState(layerProto, LayerVector::StateSet::Drawing, traceFlags);

    if (traceFlags & SurfaceTracing::TRACE_COMPOSITION) {
        // Only populate for the primary display.
        if (display) {
            const Hwc2::IComposerClient::Composition compositionType = getCompositionType(*display);
            layerProto->set_hwc_composition_type(static_cast<HwcCompositionType>(compositionType));
        }
    }

    for (const sp<Layer>& layer : mDrawingChildren) {
        layer->writeToProto(layersProto, traceFlags, display);
    }

    return layerProto;
}

void Layer::writeToProtoDrawingState(LayerProto* layerInfo, uint32_t traceFlags,
                                     const DisplayDevice* display) {
    const ui::Transform transform = getTransform();

    if (traceFlags & SurfaceTracing::TRACE_CRITICAL) {

        auto buffer = getBuffer();
        if (buffer != nullptr) {
            LayerProtoHelper::writeToProto(buffer,
                                           [&]() { return layerInfo->mutable_active_buffer(); });
            LayerProtoHelper::writeToProto(ui::Transform(getBufferTransform()),
                                           layerInfo->mutable_buffer_transform());
        }
        layerInfo->set_invalidate(contentDirty);
        layerInfo->set_is_protected(isProtected());
        layerInfo->set_dataspace(dataspaceDetails(static_cast<android_dataspace>(getDataSpace())));
        layerInfo->set_queued_frames(getQueuedFrameCount());
        layerInfo->set_refresh_pending(isBufferLatched());
        layerInfo->set_curr_frame(mCurrentFrameNumber);
        layerInfo->set_effective_scaling_mode(getEffectiveScalingMode());

        layerInfo->set_requested_corner_radius(getDrawingState().cornerRadius);
        layerInfo->set_corner_radius(getRoundedCornerState().radius);
        layerInfo->set_background_blur_radius(getBackgroundBlurRadius());
        layerInfo->set_is_trusted_overlay(isTrustedOverlay());
        LayerProtoHelper::writeToProto(transform, layerInfo->mutable_transform());
        LayerProtoHelper::writePositionToProto(transform.tx(), transform.ty(),
                                               [&]() { return layerInfo->mutable_position(); });
        LayerProtoHelper::writeToProto(mBounds, [&]() { return layerInfo->mutable_bounds(); });
        if (traceFlags & SurfaceTracing::TRACE_COMPOSITION) {
            LayerProtoHelper::writeToProto(getVisibleRegion(display),
                                           [&]() { return layerInfo->mutable_visible_region(); });
        }
        LayerProtoHelper::writeToProto(surfaceDamageRegion,
                                       [&]() { return layerInfo->mutable_damage_region(); });

        if (hasColorTransform()) {
            LayerProtoHelper::writeToProto(getColorTransform(),
                                           layerInfo->mutable_color_transform());
        }
    }

    LayerProtoHelper::writeToProto(mSourceBounds,
                                   [&]() { return layerInfo->mutable_source_bounds(); });
    LayerProtoHelper::writeToProto(mScreenBounds,
                                   [&]() { return layerInfo->mutable_screen_bounds(); });
    LayerProtoHelper::writeToProto(getRoundedCornerState().cropRect,
                                   [&]() { return layerInfo->mutable_corner_radius_crop(); });
    layerInfo->set_shadow_radius(mEffectiveShadowRadius);
}

void Layer::writeToProtoCommonState(LayerProto* layerInfo, LayerVector::StateSet stateSet,
                                    uint32_t traceFlags) {
    const bool useDrawing = stateSet == LayerVector::StateSet::Drawing;
    const LayerVector& children = useDrawing ? mDrawingChildren : mCurrentChildren;
    const State& state = useDrawing ? mDrawingState : mDrawingState;

    ui::Transform requestedTransform = state.transform;

    if (traceFlags & SurfaceTracing::TRACE_CRITICAL) {
        layerInfo->set_id(sequence);
        layerInfo->set_name(getName().c_str());
        layerInfo->set_type(getType());

        for (const auto& child : children) {
            layerInfo->add_children(child->sequence);
        }

        for (const wp<Layer>& weakRelative : state.zOrderRelatives) {
            sp<Layer> strongRelative = weakRelative.promote();
            if (strongRelative != nullptr) {
                layerInfo->add_relatives(strongRelative->sequence);
            }
        }

        LayerProtoHelper::writeToProto(state.activeTransparentRegion_legacy,
                                       [&]() { return layerInfo->mutable_transparent_region(); });

        layerInfo->set_layer_stack(getLayerStack());
        layerInfo->set_z(state.z);

        LayerProtoHelper::writePositionToProto(requestedTransform.tx(), requestedTransform.ty(),
                                               [&]() {
                                                   return layerInfo->mutable_requested_position();
                                               });

        LayerProtoHelper::writeSizeToProto(state.width, state.height,
                                           [&]() { return layerInfo->mutable_size(); });

        LayerProtoHelper::writeToProto(state.crop, [&]() { return layerInfo->mutable_crop(); });

        layerInfo->set_is_opaque(isOpaque(state));


        layerInfo->set_pixel_format(decodePixelFormat(getPixelFormat()));
        LayerProtoHelper::writeToProto(getColor(), [&]() { return layerInfo->mutable_color(); });
        LayerProtoHelper::writeToProto(state.color,
                                       [&]() { return layerInfo->mutable_requested_color(); });
        layerInfo->set_flags(state.flags);

        LayerProtoHelper::writeToProto(requestedTransform,
                                       layerInfo->mutable_requested_transform());

        auto parent = useDrawing ? mDrawingParent.promote() : mCurrentParent.promote();
        if (parent != nullptr) {
            layerInfo->set_parent(parent->sequence);
        } else {
            layerInfo->set_parent(-1);
        }

        auto zOrderRelativeOf = state.zOrderRelativeOf.promote();
        if (zOrderRelativeOf != nullptr) {
            layerInfo->set_z_order_relative_of(zOrderRelativeOf->sequence);
        } else {
            layerInfo->set_z_order_relative_of(-1);
        }

        layerInfo->set_is_relative_of(state.isRelativeOf);

        layerInfo->set_owner_uid(mOwnerUid);
    }

    if (traceFlags & SurfaceTracing::TRACE_INPUT) {
        WindowInfo info;
        if (useDrawing) {
            info = fillInputInfo({nullptr});
        } else {
            info = state.inputInfo;
        }

        LayerProtoHelper::writeToProto(info, state.touchableRegionCrop,
                                       [&]() { return layerInfo->mutable_input_window_info(); });
    }

    if (traceFlags & SurfaceTracing::TRACE_EXTRA) {
        auto protoMap = layerInfo->mutable_metadata();
        for (const auto& entry : state.metadata.mMap) {
            (*protoMap)[entry.first] = std::string(entry.second.cbegin(), entry.second.cend());
        }
    }
}

bool Layer::isRemovedFromCurrentState() const  {
    return mRemovedFromDrawingState;
}

ui::Transform Layer::getInputTransform() const {
    return getTransform();
}

Rect Layer::getInputBounds() const {
    return getCroppedBufferSize(getDrawingState());
}

void Layer::fillInputFrameInfo(WindowInfo& info, const ui::Transform& toNonRotatedDisplay) {
    // Transform layer size to screen space and inset it by surface insets.
    // If this is a portal window, set the touchableRegion to the layerBounds.
    Rect layerBounds = info.portalToDisplayId == ADISPLAY_ID_NONE
            ? getInputBounds()
            : info.touchableRegion.getBounds();
    if (!layerBounds.isValid()) {
        layerBounds = getInputBounds();
    }

    if (!layerBounds.isValid()) {
        // If the layer bounds is empty, set the frame to empty and clear the transform
        info.frameLeft = 0;
        info.frameTop = 0;
        info.frameRight = 0;
        info.frameBottom = 0;
        info.transform.reset();
        return;
    }

    ui::Transform layerToDisplay = getInputTransform();
    // Transform that takes window coordinates to non-rotated display coordinates
    ui::Transform t = toNonRotatedDisplay * layerToDisplay;
    int32_t xSurfaceInset = info.surfaceInset;
    int32_t ySurfaceInset = info.surfaceInset;
    // Bring screenBounds into non-rotated space
    Rect screenBounds = toNonRotatedDisplay.transform(Rect{mScreenBounds});

    const float xScale = t.getScaleX();
    const float yScale = t.getScaleY();
    if (xScale != 1.0f || yScale != 1.0f) {
        xSurfaceInset = std::round(xSurfaceInset * xScale);
        ySurfaceInset = std::round(ySurfaceInset * yScale);
    }

    // Transform the layer bounds from layer coordinate space to display coordinate space.
    Rect transformedLayerBounds = t.transform(layerBounds);

    // clamp inset to layer bounds
    xSurfaceInset = (xSurfaceInset >= 0)
            ? std::min(xSurfaceInset, transformedLayerBounds.getWidth() / 2)
            : 0;
    ySurfaceInset = (ySurfaceInset >= 0)
            ? std::min(ySurfaceInset, transformedLayerBounds.getHeight() / 2)
            : 0;

    // inset while protecting from overflow TODO(b/161235021): What is going wrong
    // in the overflow scenario?
    {
    int32_t tmp;
    if (!__builtin_add_overflow(transformedLayerBounds.left, xSurfaceInset, &tmp))
        transformedLayerBounds.left = tmp;
    if (!__builtin_sub_overflow(transformedLayerBounds.right, xSurfaceInset, &tmp))
        transformedLayerBounds.right = tmp;
    if (!__builtin_add_overflow(transformedLayerBounds.top, ySurfaceInset, &tmp))
        transformedLayerBounds.top = tmp;
    if (!__builtin_sub_overflow(transformedLayerBounds.bottom, ySurfaceInset, &tmp))
        transformedLayerBounds.bottom = tmp;
    }

    // Compute the correct transform to send to input. This will allow it to transform the
    // input coordinates from display space into window space. Therefore, it needs to use the
    // final layer frame to create the inverse transform. Since surface insets are added later,
    // along with the overflow, the best way to ensure we get the correct transform is to use
    // the final frame calculated.
    // 1. Take the original transform set on the window and get the inverse transform. This is
    //    used to get the final bounds in display space (ignorning the transform). Apply the
    //    inverse transform on the layerBounds to get the untransformed frame (in layer space)
    // 2. Take the top and left of the untransformed frame to get the real position on screen.
    //    Apply the layer transform on top/left so it includes any scale or rotation. These will
    //    be the new translation values for the transform.
    // 3. Update the translation of the original transform to the new translation values.
    // 4. Send the inverse transform to input so the coordinates can be transformed back into
    //    window space.
    ui::Transform inverseTransform = t.inverse();
    Rect nonTransformedBounds = inverseTransform.transform(transformedLayerBounds);
    vec2 translation = t.transform(nonTransformedBounds.left, nonTransformedBounds.top);
    ui::Transform inputTransform(t);
    inputTransform.set(translation.x, translation.y);
    info.transform = inputTransform.inverse();

    // We need to send the layer bounds cropped to the screenbounds since the layer can be cropped.
    // The frame should be the area the user sees on screen since it's used for occlusion
    // detection.
    transformedLayerBounds.intersect(screenBounds, &transformedLayerBounds);
    info.frameLeft = transformedLayerBounds.left;
    info.frameTop = transformedLayerBounds.top;
    info.frameRight = transformedLayerBounds.right;
    info.frameBottom = transformedLayerBounds.bottom;

    // Position the touchable region relative to frame screen location and restrict it to frame
    // bounds.
    info.touchableRegion = inputTransform.transform(info.touchableRegion);
}

void Layer::fillTouchOcclusionMode(WindowInfo& info) {
    sp<Layer> p = this;
    while (p != nullptr && !p->hasInputInfo()) {
        p = p->mDrawingParent.promote();
    }
    if (p != nullptr) {
        info.touchOcclusionMode = p->mDrawingState.inputInfo.touchOcclusionMode;
    }
}

WindowInfo Layer::fillInputInfo(const sp<DisplayDevice>& display) {
    if (!hasInputInfo()) {
        mDrawingState.inputInfo.name = getName();
        mDrawingState.inputInfo.ownerUid = mOwnerUid;
        mDrawingState.inputInfo.ownerPid = mOwnerPid;
        mDrawingState.inputInfo.inputFeatures = WindowInfo::Feature::NO_INPUT_CHANNEL;
        mDrawingState.inputInfo.flags = WindowInfo::Flag::NOT_TOUCH_MODAL;
        mDrawingState.inputInfo.displayId = getLayerStack();
    }

    WindowInfo info = mDrawingState.inputInfo;
    info.id = sequence;
    info.displayId = getLayerStack();

    // Transform that goes from "logical(rotated)" display to the non-rotated display.
    ui::Transform toNonRotatedDisplay;
    if (display) {
        // The physical orientation is set when the orientation of the display panel is different
        // than the default orientation of the device. We do not need to expose the physical
        // orientation of the panel outside of SurfaceFlinger.
        const ui::Rotation inversePhysicalOrientation =
                ui::ROTATION_0 - display->getPhysicalOrientation();
        auto width = display->getWidth();
        auto height = display->getHeight();
        if (inversePhysicalOrientation == ui::ROTATION_90 ||
            inversePhysicalOrientation == ui::ROTATION_270) {
            std::swap(width, height);
        }
        const auto rotationFlags = ui::Transform::toRotationFlags(inversePhysicalOrientation);
        const ui::Transform undoPhysicalOrientation(rotationFlags, width, height);
        toNonRotatedDisplay = undoPhysicalOrientation * display->getTransform();

        // Send the inverse of the display orientation so that input can transform points back to
        // the rotated display space.
        const ui::Rotation inverseOrientation = ui::ROTATION_0 - display->getOrientation();
        info.displayOrientation = ui::Transform::toRotationFlags(inverseOrientation);

        info.displayWidth = width;
        info.displayHeight = height;
    }
    fillInputFrameInfo(info, toNonRotatedDisplay);

    // For compatibility reasons we let layers which can receive input
    // receive input before they have actually submitted a buffer. Because
    // of this we use canReceiveInput instead of isVisible to check the
    // policy-visibility, ignoring the buffer state. However for layers with
    // hasInputInfo()==false we can use the real visibility state.
    // We are just using these layers for occlusion detection in
    // InputDispatcher, and obviously if they aren't visible they can't occlude
    // anything.
    info.visible = hasInputInfo() ? canReceiveInput() : isVisible();
    info.alpha = getAlpha();
    fillTouchOcclusionMode(info);

    auto cropLayer = mDrawingState.touchableRegionCrop.promote();
    if (info.replaceTouchableRegionWithCrop) {
        if (cropLayer == nullptr) {
            info.touchableRegion = Region(toNonRotatedDisplay.transform(Rect{mScreenBounds}));
        } else {
            info.touchableRegion =
                    Region(toNonRotatedDisplay.transform(Rect{cropLayer->mScreenBounds}));
        }
    } else if (cropLayer != nullptr) {
        info.touchableRegion = info.touchableRegion.intersect(
                toNonRotatedDisplay.transform(Rect{cropLayer->mScreenBounds}));
    }

    // Inherit the trusted state from the parent hierarchy, but don't clobber the trusted state
    // if it was set by WM for a known system overlay
    info.trustedOverlay = info.trustedOverlay || isTrustedOverlay();


    // If the layer is a clone, we need to crop the input region to cloned root to prevent
    // touches from going outside the cloned area.
    if (isClone()) {
        sp<Layer> clonedRoot = getClonedRoot();
        if (clonedRoot != nullptr) {
            Rect rect = toNonRotatedDisplay.transform(Rect{clonedRoot->mScreenBounds});
            info.touchableRegion = info.touchableRegion.intersect(rect);
        }
    }

    return info;
}

sp<Layer> Layer::getClonedRoot() {
    if (mClonedChild != nullptr) {
        return this;
    }
    if (mDrawingParent == nullptr || mDrawingParent.promote() == nullptr) {
        return nullptr;
    }
    return mDrawingParent.promote()->getClonedRoot();
}

bool Layer::hasInputInfo() const {
    return mDrawingState.inputInfo.token != nullptr;
}

bool Layer::canReceiveInput() const {
    return !isHiddenByPolicy();
}

compositionengine::OutputLayer* Layer::findOutputLayerForDisplay(
        const DisplayDevice* display) const {
    if (!display) return nullptr;
    return display->getCompositionDisplay()->getOutputLayerForLayer(getCompositionEngineLayerFE());
}

Region Layer::getVisibleRegion(const DisplayDevice* display) const {
    const auto outputLayer = findOutputLayerForDisplay(display);
    return outputLayer ? outputLayer->getState().visibleRegion : Region();
}

void Layer::setInitialValuesForClone(const sp<Layer>& clonedFrom) {
    // copy drawing state from cloned layer
    mDrawingState = clonedFrom->mDrawingState;
    mClonedFrom = clonedFrom;
}

void Layer::updateMirrorInfo() {
    if (mClonedChild == nullptr || !mClonedChild->isClonedFromAlive()) {
        // If mClonedChild is null, there is nothing to mirror. If isClonedFromAlive returns false,
        // it means that there is a clone, but the layer it was cloned from has been destroyed. In
        // that case, we want to delete the reference to the clone since we want it to get
        // destroyed. The root, this layer, will still be around since the client can continue
        // to hold a reference, but no cloned layers will be displayed.
        mClonedChild = nullptr;
        return;
    }

    std::map<sp<Layer>, sp<Layer>> clonedLayersMap;
    // If the real layer exists and is in current state, add the clone as a child of the root.
    // There's no need to remove from drawingState when the layer is offscreen since currentState is
    // copied to drawingState for the root layer. So the clonedChild is always removed from
    // drawingState and then needs to be added back each traversal.
    if (!mClonedChild->getClonedFrom()->isRemovedFromCurrentState()) {
        addChildToDrawing(mClonedChild);
    }

    mClonedChild->updateClonedDrawingState(clonedLayersMap);
    mClonedChild->updateClonedChildren(this, clonedLayersMap);
    mClonedChild->updateClonedRelatives(clonedLayersMap);
}

void Layer::updateClonedDrawingState(std::map<sp<Layer>, sp<Layer>>& clonedLayersMap) {
    // If the layer the clone was cloned from is alive, copy the content of the drawingState
    // to the clone. If the real layer is no longer alive, continue traversing the children
    // since we may be able to pull out other children that are still alive.
    if (isClonedFromAlive()) {
        sp<Layer> clonedFrom = getClonedFrom();
        mDrawingState = clonedFrom->mDrawingState;
        clonedLayersMap.emplace(clonedFrom, this);
    }

    // The clone layer may have children in drawingState since they may have been created and
    // added from a previous request to updateMirorInfo. This is to ensure we don't recreate clones
    // that already exist, since we can just re-use them.
    // The drawingChildren will not get overwritten by the currentChildren since the clones are
    // not updated in the regular traversal. They are skipped since the root will lose the
    // reference to them when it copies its currentChildren to drawing.
    for (sp<Layer>& child : mDrawingChildren) {
        child->updateClonedDrawingState(clonedLayersMap);
    }
}

void Layer::updateClonedChildren(const sp<Layer>& mirrorRoot,
                                 std::map<sp<Layer>, sp<Layer>>& clonedLayersMap) {
    mDrawingChildren.clear();

    if (!isClonedFromAlive()) {
        return;
    }

    sp<Layer> clonedFrom = getClonedFrom();
    for (sp<Layer>& child : clonedFrom->mDrawingChildren) {
        if (child == mirrorRoot) {
            // This is to avoid cyclical mirroring.
            continue;
        }
        sp<Layer> clonedChild = clonedLayersMap[child];
        if (clonedChild == nullptr) {
            clonedChild = child->createClone();
            clonedLayersMap[child] = clonedChild;
        }
        addChildToDrawing(clonedChild);
        clonedChild->updateClonedChildren(mirrorRoot, clonedLayersMap);
    }
}

void Layer::updateClonedInputInfo(const std::map<sp<Layer>, sp<Layer>>& clonedLayersMap) {
    auto cropLayer = mDrawingState.touchableRegionCrop.promote();
    if (cropLayer != nullptr) {
        if (clonedLayersMap.count(cropLayer) == 0) {
            // Real layer had a crop layer but it's not in the cloned hierarchy. Just set to
            // self as crop layer to avoid going outside bounds.
            mDrawingState.touchableRegionCrop = this;
        } else {
            const sp<Layer>& clonedCropLayer = clonedLayersMap.at(cropLayer);
            mDrawingState.touchableRegionCrop = clonedCropLayer;
        }
    }
    // Cloned layers shouldn't handle watch outside since their z order is not determined by
    // WM or the client.
    mDrawingState.inputInfo.flags &= ~WindowInfo::Flag::WATCH_OUTSIDE_TOUCH;
}

void Layer::updateClonedRelatives(const std::map<sp<Layer>, sp<Layer>>& clonedLayersMap) {
    mDrawingState.zOrderRelativeOf = nullptr;
    mDrawingState.zOrderRelatives.clear();

    if (!isClonedFromAlive()) {
        return;
    }

    const sp<Layer>& clonedFrom = getClonedFrom();
    for (wp<Layer>& relativeWeak : clonedFrom->mDrawingState.zOrderRelatives) {
        const sp<Layer>& relative = relativeWeak.promote();
        if (clonedLayersMap.count(relative) > 0) {
            auto& clonedRelative = clonedLayersMap.at(relative);
            mDrawingState.zOrderRelatives.add(clonedRelative);
        }
    }

    // Check if the relativeLayer for the real layer is part of the cloned hierarchy.
    // It's possible that the layer it's relative to is outside the requested cloned hierarchy.
    // In that case, we treat the layer as if the relativeOf has been removed. This way, it will
    // still traverse the children, but the layer with the missing relativeOf will not be shown
    // on screen.
    const sp<Layer>& relativeOf = clonedFrom->mDrawingState.zOrderRelativeOf.promote();
    if (clonedLayersMap.count(relativeOf) > 0) {
        const sp<Layer>& clonedRelativeOf = clonedLayersMap.at(relativeOf);
        mDrawingState.zOrderRelativeOf = clonedRelativeOf;
    }

    updateClonedInputInfo(clonedLayersMap);

    for (sp<Layer>& child : mDrawingChildren) {
        child->updateClonedRelatives(clonedLayersMap);
    }
}

void Layer::addChildToDrawing(const sp<Layer>& layer) {
    mDrawingChildren.add(layer);
    layer->mDrawingParent = this;
}

Layer::FrameRateCompatibility Layer::FrameRate::convertCompatibility(int8_t compatibility) {
    switch (compatibility) {
        case ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_DEFAULT:
            return FrameRateCompatibility::Default;
        case ANATIVEWINDOW_FRAME_RATE_COMPATIBILITY_FIXED_SOURCE:
            return FrameRateCompatibility::ExactOrMultiple;
        case ANATIVEWINDOW_FRAME_RATE_EXACT:
            return FrameRateCompatibility::Exact;
        default:
            LOG_ALWAYS_FATAL("Invalid frame rate compatibility value %d", compatibility);
            return FrameRateCompatibility::Default;
    }
}

scheduler::Seamlessness Layer::FrameRate::convertChangeFrameRateStrategy(int8_t strategy) {
    switch (strategy) {
        case ANATIVEWINDOW_CHANGE_FRAME_RATE_ONLY_IF_SEAMLESS:
            return Seamlessness::OnlySeamless;
        case ANATIVEWINDOW_CHANGE_FRAME_RATE_ALWAYS:
            return Seamlessness::SeamedAndSeamless;
        default:
            LOG_ALWAYS_FATAL("Invalid change frame sate strategy value %d", strategy);
            return Seamlessness::Default;
    }
}

bool Layer::getPrimaryDisplayOnly() const {
    const State& s(mDrawingState);
    if (s.flags & layer_state_t::eLayerSkipScreenshot) {
        return true;
    }

    sp<Layer> parent = mDrawingParent.promote();
    return parent == nullptr ? false : parent->getPrimaryDisplayOnly();
}

void Layer::setClonedChild(const sp<Layer>& clonedChild) {
    mClonedChild = clonedChild;
    mHadClonedChild = true;
    mFlinger->mNumClones++;
}

const String16 Layer::Handle::kDescriptor = String16("android.Layer.Handle");

wp<Layer> Layer::fromHandle(const sp<IBinder>& handleBinder) {
    if (handleBinder == nullptr) {
        return nullptr;
    }

    BBinder* b = handleBinder->localBinder();
    if (b == nullptr || b->getInterfaceDescriptor() != Handle::kDescriptor) {
        return nullptr;
    }

    // We can safely cast this binder since its local and we verified its interface descriptor.
    sp<Handle> handle = static_cast<Handle*>(handleBinder.get());
    return handle->owner;
}

// ---------------------------------------------------------------------------

std::ostream& operator<<(std::ostream& stream, const Layer::FrameRate& rate) {
    return stream << "{rate=" << rate.rate
                  << " type=" << Layer::frameRateCompatibilityString(rate.type)
                  << " seamlessness=" << toString(rate.seamlessness) << "}";
}

}; // namespace android

#if defined(__gl_h_)
#error "don't include gl/gl.h in this file"
#endif

#if defined(__gl2_h_)
#error "don't include gl2/gl2.h in this file"
#endif

// TODO(b/129481165): remove the #pragma below and fix conversion issues
#pragma clang diagnostic pop // ignored "-Wconversion"