blob: 375b5988e5e31bfd03e6b195bda81a3168979985 [file] [log] [blame]
Bram Moolenaare1d12892004-06-13 13:02:36 +00001# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78
2#
3# This Makefile is loosely based on the GNU Makefile conventions found in
4# standards.info.
5#
6# Compiling Vim, summary:
7#
8# 3. make
9# 5. make install
10#
11# Compiling Vim, details:
12#
13# Edit this file for adjusting to your system. You should not need to edit any
14# other file for machine specific things!
15# The name of this file MUST be Makefile (note the uppercase 'M').
16#
17# 1. Edit this Makefile {{{1
18# The defaults for Vim should work on most machines, but you may want to
19# uncomment some lines or make other changes below to tune it to your
20# system, compiler or preferences. Uncommenting means that the '#' in
21# the first column of a line is removed.
22# - If you want a version of Vim that is small and starts up quickly,
23# you might want to disable the GUI, X11, Perl, Python and Tcl.
24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or
25# Athena but don't want to make gvim (the GUI version of Vim with nice
26# menus and scrollbars, but makes Vim bigger and startup slower).
27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a
28# Unix version.
29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
30# want to disable using X11 libraries. This speeds up starting Vim,
31# but the window title will not be set and the X11 selection can not
32# used.
Bram Moolenaar0387e652010-05-07 16:54:37 +020033# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the
Bram Moolenaare1d12892004-06-13 13:02:36 +000034# X11 Session Management Protocol (XSMP) library (libSM) but do not
35# want to use it.
36# This can speedup Vim startup but Vim loses the ability to catch the
Bram Moolenaar9372a112005-12-06 19:59:18 +000037# user logging out from session-managers like GNOME and work
Bram Moolenaare1d12892004-06-13 13:02:36 +000038# could be lost.
39# - Uncomment one or more of these lines to include an interface;
40# each makes Vim quite a bit bigger:
41# --enable-perlinterp for Perl interpreter
42# --enable-pythoninterp for Python interpreter
43# --enable-rubyinterp for Ruby interpreter
44# --enable-tclinterp for Tcl interpreter
45# --enable-cscope for Cscope interface
46# - Uncomment one of the lines with --with-features= to enable a set of
47# features (but not the interfaces just mentioned).
48# - Uncomment the line with --disable-acl to disable ACL support even
49# though your system supports it.
50# - Uncomment the line with --disable-gpm to disable gpm support
Bram Moolenaar3577c6f2008-06-24 21:16:56 +000051# even though you have gpm libraries and includes.
52# - Uncomment the line with --disable-sysmouse to disable sysmouse
53# support even though you have /dev/sysmouse and includes.
Bram Moolenaare1d12892004-06-13 13:02:36 +000054# - Uncomment one of the lines with CFLAGS and/or CC if you have
55# something very special or want to tune the optimizer.
56# - Search for the name of your system to see if it needs anything
57# special.
58# - A few versions of make use '.include "file"' instead of 'include
59# file'. Adjust the include line below if yours does.
60#
61# 2. Edit feature.h {{{1
62# Only if you do not agree with the default compile features, e.g.:
63# - you want Vim to be as vi compatible as it can be
64# - you want to use Emacs tags files
65# - you want right-to-left editing (Hebrew)
66# - you want 'langmap' support (Greek)
67# - you want to remove features to make Vim smaller
68#
69# 3. "make" {{{1
70# Will first run ./configure with the options in this file. Then it will
71# start make again on this Makefile to do the compiling. You can also do
72# this in two steps with:
73# make config
74# make
75# The configuration phase creates/overwrites auto/config.h and
76# auto/config.mk.
77# The configure script is created with "make autoconf". It can detect
78# different features of your system and act accordingly. However, it is
79# not correct for all systems. Check this:
80# - If you have X windows, but configure could not find it or reported
81# another include/library directory then you wanted to use, you have
82# to set CONF_OPT_X below. You might also check the installation of
83# xmkmf.
84# - If you have --enable-gui=motif and have Motif on your system, but
85# configure reports "checking for location of gui... <not found>", you
86# have to set GUI_INC_LOC and GUI_LIB_LOC below.
87# If you changed something, do this to run configure again:
88# make reconfig
89#
90# - If you do not trust the automatic configuration code, then inspect
91# auto/config.h and auto/config.mk, before starting the actual build
92# phase. If possible edit this Makefile, rather than auto/config.mk --
93# especially look at the definition of VIMLOC below. Note that the
94# configure phase overwrites auto/config.mk and auto/config.h again.
95# - If you get error messages, find out what is wrong and try to correct
96# it in this Makefile. You may need to do "make reconfig" when you
97# change anything that configure uses (e.g. switching from an old C
98# compiler to an ANSI C compiler). Only when auto/configure does
99# something wrong you may need to change one of the other files. If
100# you find a clean way to fix the problem, consider sending a note to
101# the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim
102# (Bram@vim.org). Don't bother to do that when you made a hack
103# solution for a non-standard system.
104#
105# 4. "make test" {{{1
106# This is optional. This will run Vim scripts on a number of test
107# files, and compare the produced output with the expected output.
Bram Moolenaarcd8b20a2009-05-22 16:20:57 +0000108# If all is well, you will get the "ALL DONE" message in the end. If a
109# test fails you get "TEST FAILURE". See below (search for "/^test").
Bram Moolenaare1d12892004-06-13 13:02:36 +0000110#
111# 5. "make install" {{{1
112# If the new Vim seems to be working OK you can install it and the
113# documentation in the appropriate location. The default is
114# "/usr/local". Change "prefix" below to change the location.
115# "auto/pathdef.c" will be compiled again after changing this to make
116# the executable know where the help files are located.
117# Note that any existing executable is removed or overwritten. If you
118# want to keep it you will have to make a backup copy first.
119# The runtime files are in a different directory for each version. You
120# might want to delete an older version.
121# If you don't want to install everything, there are other targets:
122# make installvim only installs Vim, not the tools
123# make installvimbin only installs the Vim executable
Bram Moolenaare344bea2005-09-01 20:46:49 +0000124# make installruntime installs most of the runtime files
125# make installrtbase only installs the Vim help and
Bram Moolenaare1d12892004-06-13 13:02:36 +0000126# runtime files
127# make installlinks only installs the Vim binary links
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +0000128# make installmanlinks only installs the Vim manpage links
Bram Moolenaare1d12892004-06-13 13:02:36 +0000129# make installmacros only installs the Vim macros
Bram Moolenaare344bea2005-09-01 20:46:49 +0000130# make installtutorbin only installs the Vim tutor program
131# make installtutor only installs the Vim tutor files
Bram Moolenaar217ad922005-03-20 22:37:15 +0000132# make installspell only installs the spell files
Bram Moolenaare1d12892004-06-13 13:02:36 +0000133# make installtools only installs xxd
134# If you install Vim, not to install for real but to prepare a package
135# or RPM, set DESTDIR to the root of the tree.
136#
137# 6. Use Vim until a new version comes out. {{{1
138#
139# 7. "make uninstall_runtime" {{{1
140# Will remove the runtime files for the current version. This is safe
141# to use while another version is being used, only version-specific
142# files will be deleted.
143# To remove the runtime files of another version:
144# make uninstall_runtime VIMRTDIR=/vim54
145# If you want to delete all installed files, use:
146# make uninstall
147# Note that this will delete files that have the same name for any
148# version, thus you might need to do a "make install" soon after this.
149# Be careful not to remove a version of Vim that is still being used!
150# To find out which files and directories will be deleted, use:
151# make -n uninstall
152# }}}
153#
Bram Moolenaara5792f52005-11-23 21:25:05 +0000154### This Makefile has been successfully tested on many systems. {{{
Bram Moolenaare1d12892004-06-13 13:02:36 +0000155### Only the ones that require special options are mentioned here.
156### Check the (*) column for remarks, listed below.
157### Later code changes may cause small problems, otherwise Vim is supposed to
158### compile and run without problems.
159
160#system: configurations: version (*) tested by:
161#------------- ------------------------ ------- - ----------
162#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash
163#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn
164#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker
165#AIX 4.2.1 cc 5.2k (C) Will Fiveash
166#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor
167#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski
168#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert
169#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus
170#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus
171#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard
172#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein
173#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive
174#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar
175#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao
176#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor
177#Irix 6.4 cc ? 5.0m (S) Rick Sayre
178#Irix 6.5 cc ? 6.0 (S) David Harrison
179#Irix 64 bit 4.5 (K) Jon Wright
180#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman
181#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert
182#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
183#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
184#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz
185#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert
186#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers
187#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick
188#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum
189#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro
190#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter
191#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
192#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
193#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer
194#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman
195#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber
196#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon
197#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large
198#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann
199#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo
200#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden
201#Solaris with -lthread 5.5 (W) K. Nagano
202#Solaris gcc (b) Riccardo
203#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar
204#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert
205#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz
Bram Moolenaar311d9822007-02-27 15:48:28 +0000206#Tandem/NSK (c) Matthew Woehlke
Bram Moolenaare1d12892004-06-13 13:02:36 +0000207#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro
208#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst
209#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar
210# }}}
211
212# (*) Remarks: {{{
213#
214# (1) Uncomment line below for shlicc2
215# (2) HPUX with compile problems or wrong digraphs, uncomment line below
216# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.
217# And add "-lXpm" to MOTIF_LIBS2.
218# (4) For cc the optimizer must be disabled (use CFLAGS= after running
219# configure) (symptom: ":set termcap" output looks weird).
220# (5) Compiler may need extra argument, see below.
221# (6) See below for a few lines to uncomment
222# (7) See below for lines which enable the use of clcc
223# (8) Needs some EXTRA_LIBS, search for Unisys below
224# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below.
225# (A) May need EXTRA_LIBS, see below
226# (B) Can't compile GUI because there is no waitpid()... Disable GUI below.
227# (C) Force the use of curses instead of termcap, see below.
228# (D) Uncomment lines below for QNX
229# (E) You might want to use termlib instead of termcap, see below.
230# (F) See below for instructions.
231# (G) Using ncursus version 4.2 has reported to cause a crash. Use the
232# Sun cursus library instead.
233# (H) See line for EXTRA_LIBS below.
234# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix.
235# (J) If you get undefined symbols, see below for a solution.
236# (K) See lines to uncomment below for machines with 64 bit pointers.
237# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk
238# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two
239# characters instead of one).
240# (N) SCO with decmouse.
241# (O) LynxOS needs EXTRA_LIBS, see below.
242# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.
243# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.
244# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.
245# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below.
246# (T) See ../doc/os_beos.txt.
247# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python
248# detection, since the configure script runs into an error when it
249# detects Python (probably because of the bash shell).
250# (V) See lines to uncomment below.
251# (X) Need to use the .include "auto/config.mk" line below
252# (Y) See line with c89 below
253# (Z) See lines with cc or c89 below
254# (a) See line with EXTRA_LIBS below.
255# (b) When using gcc with the Solaris linker, make sure you don't use GNU
256# strip, otherwise the binary may not run: "Cannot find ELF".
Bram Moolenaar311d9822007-02-27 15:48:28 +0000257# (c) Add -lfloss to EXTRA_LIBS, see below.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000258# (x) When you get warnings for precompiled header files, run
259# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below.
260# }}}
261
262
263#DO NOT CHANGE the next line, we need it for configure to find the compiler
264#instead of using the default from the "make" program.
265#Use a line further down to change the value for CC.
266CC=
267
268# Change and use these defines if configure cannot find your Motif stuff.
269# Unfortunately there is no "standard" location for Motif. {{{
270# These defines can contain a single directory (recommended) or a list of
271# directories (for when you are working with several systems). The LAST
272# directory that exists is used.
273# When changed, run "make reconfig" next!
274#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2
275#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2
276### Use these two lines for Infomagic Motif (3)
277#GUI_INC_LOC = -I/usr/X11R6/include
278#GUI_LIB_LOC = -L/usr/X11R6/lib
279# }}}
280
281######################## auto/config.mk ######################## {{{1
282# At this position auto/config.mk is included. When starting from the
283# distribution it is almost empty. After running auto/configure it contains
284# settings that have been discovered for your system. Settings below this
285# include override settings in auto/config.mk!
286
287# Note: if auto/config.mk is lost somehow (e.g., because configure was
288# interrupted), create an empty auto/config.mk file and do "make config".
289
290# (X) How to include auto/config.mk depends on the version of "make" you have,
291# if the current choice doesn't work, try the other one.
292
293include auto/config.mk
294#.include "auto/config.mk"
295CClink = $(CC)
296
297#}}}
298
299# Include the configuration choices first, so we can override everything
300# below. As shipped, this file contains a target that causes to run
301# configure. Once configure was run, this file contains a list of
302# make variables with predefined values instead. Thus any second invocation
Bram Moolenaara5792f52005-11-23 21:25:05 +0000303# of make, will build Vim.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000304
305# CONFIGURE - configure arguments {{{1
306# You can give a lot of options to configure.
307# Change this to your desire and do 'make config' afterwards
308
309# examples (can only use one!):
310#CONF_ARGS = --exec-prefix=/usr
Bram Moolenaarc01140a2006-03-24 22:21:52 +0000311#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7
Bram Moolenaare1d12892004-06-13 13:02:36 +0000312#CONF_ARGS = --with-global-runtime=/etc/vim
Bram Moolenaarc236c162008-07-13 17:41:49 +0000313#CONF_ARGS = --with-local-dir=/usr/share
314#CONF_ARGS = --without-local-dir
Bram Moolenaare1d12892004-06-13 13:02:36 +0000315
316# Use this one if you distribute a modified version of Vim.
317#CONF_ARGS = --with-modified-by="John Doe"
318
319# GUI - For creating Vim with GUI (gvim) (B)
320# Uncomment this line when you don't want to get the GUI version, although you
321# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11
322# at all.
323#CONF_OPT_GUI = --disable-gui
324
325# Uncomment one of these lines if you have that GUI but don't want to use it.
Bram Moolenaar24b23172007-05-06 12:54:06 +0000326# The automatic check will use another one that can be found.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000327# Gnome is disabled by default, it may cause trouble.
328#CONF_OPT_GUI = --disable-gtk-check
329#CONF_OPT_GUI = --disable-gtk2-check
330#CONF_OPT_GUI = --enable-gnome-check
331#CONF_OPT_GUI = --enable-gnome2-check
332#CONF_OPT_GUI = --disable-motif-check
333#CONF_OPT_GUI = --disable-athena-check
334#CONF_OPT_GUI = --disable-nextaw-check
335
336# Uncomment one of these lines to select a specific GUI to use.
337# When using "yes" or nothing, configure will use the first one found: GTK+,
338# Motif or Athena.
339#
340# GTK versions that are known not to work 100% are rejected.
341# Use "--disable-gtktest" to accept them anyway.
342#
Bram Moolenaar24b23172007-05-06 12:54:06 +0000343# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check
344# is used then GNOME will automatically be used if it is found. If you have
345# GNOME, but do not want to use it (e.g., want a GTK-only version), then use
346# --enable-gui=gtk or leave out --enable-gnome-check.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000347#
348# If the selected GUI isn't found, the GUI is disabled automatically
349#CONF_OPT_GUI = --enable-gui=gtk
350#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
351#CONF_OPT_GUI = --enable-gui=gtk2
352#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest
353#CONF_OPT_GUI = --enable-gui=gnome
354#CONF_OPT_GUI = --enable-gui=gnome2
355#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest
356#CONF_OPT_GUI = --enable-gui=motif
357#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"
358#CONF_OPT_GUI = --enable-gui=athena
359#CONF_OPT_GUI = --enable-gui=nextaw
360
361# DARWIN - detecting Mac OS X
362# Uncomment this line when you want to compile a Unix version of Vim on
363# Darwin. None of the Mac specific options or files will be used.
364#CONF_OPT_DARWIN = --disable-darwin
Bram Moolenaar899dddf2006-03-26 21:06:50 +0000365
366# Select the architecture supported. Default is to build for the current
367# platform. Use "both" for a universal binary. That probably doesn't work
368# when including Perl, Python, etc.
Bram Moolenaara23ccb82006-02-27 00:08:02 +0000369#CONF_OPT_DARWIN = --with-mac-arch=i386
370#CONF_OPT_DARWIN = --with-mac-arch=ppc
Bram Moolenaar899dddf2006-03-26 21:06:50 +0000371#CONF_OPT_DARWIN = --with-mac-arch=both
Bram Moolenaare1d12892004-06-13 13:02:36 +0000372
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000373# PERL
Bram Moolenaare1d12892004-06-13 13:02:36 +0000374# Uncomment this when you want to include the Perl interface.
375# The Perl option sometimes causes problems, because it adds extra flags
376# to the command line. If you see strange flags during compilation, check in
377# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting
378# the next line.
379# When you get an error for a missing "perl.exp" file, try creating an emtpy
380# one: "touch perl.exp".
381# This requires at least "small" features, "tiny" doesn't work.
382#CONF_OPT_PERL = --enable-perlinterp
383
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000384# PYTHON
Bram Moolenaare1d12892004-06-13 13:02:36 +0000385# Uncomment this when you want to include the Python interface.
Bram Moolenaar0e21a3f2005-04-17 20:28:32 +0000386# NOTE: This may cause threading to be enabled, which has side effects (such
387# as using different libraries and debugging becomes more difficult).
Bram Moolenaara5792f52005-11-23 21:25:05 +0000388# NOTE: Using this together with Perl may cause a crash in initialization.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000389#CONF_OPT_PYTHON = --enable-pythoninterp
390
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000391# TCL
Bram Moolenaare1d12892004-06-13 13:02:36 +0000392# Uncomment this when you want to include the Tcl interface.
393#CONF_OPT_TCL = --enable-tclinterp
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +0000394#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4
Bram Moolenaare1d12892004-06-13 13:02:36 +0000395
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000396# RUBY
Bram Moolenaare1d12892004-06-13 13:02:36 +0000397# Uncomment this when you want to include the Ruby interface.
Bram Moolenaar165641d2010-02-17 16:23:09 +0100398# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu).
399# CONF_OPT_RUBY = --enable-rubyinterp
400# CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1
Bram Moolenaare1d12892004-06-13 13:02:36 +0000401
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000402# MZSCHEME
403# Uncomment this when you want to include the MzScheme interface.
404#CONF_OPT_MZSCHEME = --enable-mzschemeinterp
405# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works
406#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt
407#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme
408#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz
409
410# CSCOPE
Bram Moolenaare1d12892004-06-13 13:02:36 +0000411# Uncomment this when you want to include the Cscope interface.
412#CONF_OPT_CSCOPE = --enable-cscope
413
414# WORKSHOP - Sun Visual Workshop interface. Only works with Motif!
415#CONF_OPT_WORKSHOP = --enable-workshop
416
417# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.
418# Motif version must have XPM libraries (see |workshop-xpm|).
419# Uncomment this when you do not want the netbeans interface.
420#CONF_OPT_NETBEANS = --disable-netbeans
421
422# SNIFF - Include support for SNiFF+.
423#CONF_OPT_SNIFF = --enable-sniff
424
425# MULTIBYTE - To edit multi-byte characters.
426# Uncomment this when you want to edit a multibyte language.
427# It's automatically enabled with big features or IME support.
428# Note: Compile on a machine where setlocale() actually works, otherwise the
429# configure tests may fail.
430#CONF_OPT_MULTIBYTE = --enable-multibyte
431
432# NLS - National Language Support
433# Uncomment this when you do not want to support translated messages, even
434# though configure can find support for it.
435#CONF_OPT_NLS = --disable-nls
436
Bram Moolenaara5792f52005-11-23 21:25:05 +0000437# XIM - X Input Method. Special character input support for X11 (Chinese,
438# Japanese, special symbols, etc). Also needed for dead-key support.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000439# When omitted it's automatically enabled for the X-windows GUI.
Bram Moolenaara5792f52005-11-23 21:25:05 +0000440# HANGUL - Input Hangul (Korean) language using internal routines.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000441# Uncomment one of these when you want to input a multibyte language.
442#CONF_OPT_INPUT = --enable-xim
443#CONF_OPT_INPUT = --disable-xim
444#CONF_OPT_INPUT = --enable-hangulinput
445
446# FONTSET - X fontset support for output of languages with many characters.
447# Uncomment this when you want to output a multibyte language.
448#CONF_OPT_OUTPUT = --enable-fontset
449
450# ACL - Uncomment this when you do not want to include ACL support, even
451# though your system does support it. E.g., when it's buggy.
452#CONF_OPT_ACL = --disable-acl
453
454# gpm - For mouse support on Linux console via gpm
455# Uncomment this when you do not want to include gpm support, even
Bram Moolenaar3577c6f2008-06-24 21:16:56 +0000456# though you have gpm libraries and includes.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000457#CONF_OPT_GPM = --disable-gpm
458
Bram Moolenaar3577c6f2008-06-24 21:16:56 +0000459# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse
460# Uncomment this when you do not want do include sysmouse support, even
461# though you have /dev/sysmouse and includes.
462#CONF_OPT_SYSMOUSE = --disable-sysmouse
463
Bram Moolenaare1d12892004-06-13 13:02:36 +0000464# FEATURES - For creating Vim with more or less features
465# Uncomment one of these lines when you want to include few to many features.
466# The default is "normal".
467#CONF_OPT_FEAT = --with-features=tiny
468#CONF_OPT_FEAT = --with-features=small
469#CONF_OPT_FEAT = --with-features=normal
470#CONF_OPT_FEAT = --with-features=big
Bram Moolenaarcfc0eee2010-05-17 21:37:47 +0200471#CONF_OPT_FEAT = --with-features=huge
Bram Moolenaare1d12892004-06-13 13:02:36 +0000472
473# COMPILED BY - For including a specific e-mail address for ":version".
474#CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"
475
476# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies
477# (otherwise Vim configure will try to include xterm titlebar access)
478# Also disable the GUI above, otherwise it will be included anyway.
479# When both GUI and X11 have been disabled this may save about 15% of the
480# code and make Vim startup quicker.
481#CONF_OPT_X = --without-x
482
483# X WINDOWS DIRECTORY - specify X directories
Bram Moolenaara5792f52005-11-23 21:25:05 +0000484# If configure can't find you X stuff, or if you have multiple X11 derivatives
Bram Moolenaare1d12892004-06-13 13:02:36 +0000485# installed, you may wish to specify which one to use.
486# Select nothing to let configure choose.
487# This here selects openwin (as found on sun).
488#XROOT = /usr/openwin
489#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib
490
491# X11 Session Management Protocol support
492# Vim will try to use XSMP to catch the user logging out if there are unsaved
493# files. Uncomment this line to disable that (it prevents vim trying to open
494# communications with the session manager).
495#CONF_OPT_XSMP = --disable-xsmp
496
497# You may wish to include xsmp but use exclude xsmp-interact if the logout
498# XSMP functionality does not work well with your session-manager (at time of
499# writing, this would be early GNOME-1 gnome-session: it 'freezes' other
500# applications after Vim has cancelled a logout (until Vim quits). This
501# *might* be the Vim code, but is more likely a bug in early GNOME-1.
502# This disables the dialog that asks you if you want to save files or not.
503#CONF_OPT_XSMP = --disable-xsmp-interact
504
505# COMPILER - Name of the compiler {{{1
506# The default from configure will mostly be fine, no need to change this, just
507# an example. If a compiler is defined here, configure will use it rather than
508# probing for one. It is dangerous to change this after configure was run.
509# Make will use your choice then -- but beware: Many things may change with
510# another compiler. It is wise to run 'make reconfig' to start all over
511# again.
512#CC = cc
513#CC = gcc
514
515# COMPILER FLAGS - change as you please. Either before running {{{1
516# configure or afterwards. For examples see below.
517# When using -g with some older versions of Linux you might get a
518# statically linked executable.
519# When not defined, configure will try to use -O2 -g for gcc and -O for cc.
520#CFLAGS = -g
521#CFLAGS = -O
522
523# Optimization limits - depends on the compiler. Automatic check in configure
524# doesn't work very well, because many compilers only give a warning for
525# unrecognized arguments.
526#CFLAGS = -O -OPT:Olimit=2600
527#CFLAGS = -O -Olimit 2000
528#CFLAGS = -O -FOlimit,2000
529
530# Often used for GCC: mixed optimizing, lot of optimizing, debugging
531#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
Bram Moolenaar69a7cb42004-06-20 12:51:53 +0000532#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes
Bram Moolenaardf177f62005-02-22 08:39:57 +0000533#CFLAGS = -g -Wall -Wmissing-prototypes
Bram Moolenaare1d12892004-06-13 13:02:36 +0000534#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
535#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes
Bram Moolenaar592e0a22004-07-03 16:05:59 +0000536#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
Bram Moolenaare1d12892004-06-13 13:02:36 +0000537
Bram Moolenaarcd8b20a2009-05-22 16:20:57 +0000538# Use this with GCC to check for mistakes, unused arguments, etc.
Bram Moolenaarcfc0eee2010-05-17 21:37:47 +0200539#CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -D_FORTIFY_SOURCE=1
540#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers
541#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter
Bram Moolenaarcd8b20a2009-05-22 16:20:57 +0000542
Bram Moolenaare1d12892004-06-13 13:02:36 +0000543# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond
544# allocated memory (and makes every malloc()/free() very slow).
545# Electric Fence is free (search ftp sites).
Bram Moolenaar53180ce2005-07-05 21:48:14 +0000546# You may want to set the EF_PROTECT_BELOW environment variable to check the
547# other side of allocated memory.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000548# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this
549# as root: sysctl -w vm.max_proc_mmap=30000
550#EXTRA_LIBS = /usr/local/lib/libefence.a
551
552# PURIFY - remove the # to use the "purify" program (hoi Nia++!)
553#PURIFY = purify
Bram Moolenaar3577c6f2008-06-24 21:16:56 +0000554
555# NBDEBUG - debugging the netbeans interface.
556#EXTRA_DEFS = -DNBDEBUG
557
Bram Moolenaare1d12892004-06-13 13:02:36 +0000558# }}}
559
560# LINT - for running lint
Bram Moolenaarcd8b20a2009-05-22 16:20:57 +0000561# For standard Unix lint
562LINT = lint
563LINT_OPTIONS = -beprxzF
564# For splint
565# It doesn't work well, crashes on include files and non-ascii characters.
566#LINT = splint
567#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999
Bram Moolenaare1d12892004-06-13 13:02:36 +0000568
569# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.
570# Might not work with GUI or Perl.
Bram Moolenaar4770d092006-01-12 23:22:24 +0000571# For unknown reasons adding "-lc" fixes a linking problem with GCC. That's
572# probably a bug in the "-pg" implementation.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000573# Need to recompile everything after changing this: "make clean" "make".
Bram Moolenaar02f07e02008-03-12 12:17:28 +0000574#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING
Bram Moolenaare1d12892004-06-13 13:02:36 +0000575#PROFILE_LIBS = -pg
Bram Moolenaar4770d092006-01-12 23:22:24 +0000576#PROFILE_LIBS = -pg -lc
Bram Moolenaare1d12892004-06-13 13:02:36 +0000577
Bram Moolenaar0a5fe212005-06-24 23:01:23 +0000578# MEMORY LEAK DETECTION
579# Requires installing the ccmalloc library.
Bram Moolenaara40ceaf2006-01-13 22:35:40 +0000580# Configuration is in the .ccmalloc or ~/.ccmalloc file.
Bram Moolenaar0a5fe212005-06-24 23:01:23 +0000581# Doesn't work very well, since memory linked to from global variables
Bram Moolenaar56718732006-03-15 22:53:57 +0000582# (in libraries) is also marked as leaked memory.
Bram Moolenaar0a5fe212005-06-24 23:01:23 +0000583#PROFILE_CFLAGS = -DEXITFREE
584#PROFILE_LIBS = -lccmalloc
585
Bram Moolenaare1d12892004-06-13 13:02:36 +0000586#####################################################
587### Specific systems, check if yours is listed! ### {{{
588#####################################################
589
590### Uncomment things here only if the values chosen by configure are wrong.
591### It's better to adjust configure.in and "make autoconf", if you can!
592### Then send the required changes to configure.in to the bugs list.
593
594### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries
595###
596#CC = shlicc2
597#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin
598
599### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler
600### The first probably works on all systems
601### The second should work a bit better on newer systems
602### The third should work a bit better on HPUX 11.11
603### Information provided by: Richard Allen <ra@rhi.hi.is>
604#CC = c89 -D_HPUX_SOURCE
605#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE
606#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE
607
608### (2) For HP-UX: Enable the use of a different set of digraphs. Use this
609### when the default (ISO) digraphs look completely wrong.
610### After changing this do "touch digraph.c; make".
611#EXTRA_DEFS = -DHPUX_DIGRAPHS
612
613### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes
614### is too small to compile many routines. It produces too much defining
615### and no space errors.
616### Uncomment the following to specify a larger macro definition table.
617#CFLAGS = -Wp,-H256000
618
619### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with
620### libraries in /usr/lib instead of /lib (avoiding transition links).
621### Information provided by: David Green
622#XROOT = /usr
623#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6
624#GUI_INC_LOC = -I/usr/include/Motif1.2
625#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6
626
627### (5) AIX 4.1.4 with cc
628#CFLAGS = -O -qmaxmem=8192
629
630### AIX with c89 (Walter Briscoe)
631#CC = c89
632#CPPFLAGS = -D_ALL_SOURCE
633
634### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)
635# needed to avoid a problem where strings.h gets included
636#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__
637
638### (W) Solaris with multi-threaded libraries (-lthread):
639### If suspending doesn't work properly, try using this line:
640#EXTRA_DEFS = -D_REENTRANT
641
642### (7) Solaris 2.4/2.5 with Centerline compiler
643#CC = clcc
644#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
645#CFLAGS = -O
646
647### (9) Solaris 2.x with cc (SunPro), using Athena.
648### Only required for compiling gui_at_sb.c.
649### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb"
650### Use one of the lines (either Full ANSI or no ANSI at all)
651#CFLAGS = $(CFLAGS) -Xc
652#CFLAGS = $(CFLAGS) -Xs
653
654### Solaris 2.3 with X11 and specific cc
655#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib
656
657### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")
658#CC = /usr/ucb/cc
659#EXTRA_LIBS = -R/usr/ucblib
660
661### Solaris with Forte Developer and FEAT_SUN_WORKSHOP
662# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.
663#CC = cc
664#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris
665#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm
666#XPM_IPATH = -I$(XPM_DIR)/include
667#EXTRA_LIBS = $(XPM_LIB)
668#EXTRA_IPATHS = $(XPM_IPATH)
669#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H
670
671### Solaris with workshop compilers: Vim is unstable when compiled with
672# "-fast". Use this instead. (Shea Martin)
673#CFLAGS = -x02 -xtarget=ultra
674
675### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:
676#LDFLAGS = -lw -ldl -lXmu
677#GUI_LIB_LOC = -L/usr/local/lib
678
679### (8) Unisys 6035 (Glauber Ribeiro)
680#EXTRA_LIBS = -lnsl -lsocket -lgen
681
682### When builtin functions cause problems with gcc (for Sun 4.1.x)
683#CFLAGS = -O2 -Wall -traditional -Wno-implicit
684
685### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
686#EXTRA_DEFS = -DDOMAIN
687#CFLAGS= -O -A systype,bsd4.3
688
689### Coherent 4.2.10 on Intel 386 platform
690#EXTRA_DEFS = -Dvoid=int
691#EXTRA_LIBS = -lterm -lsocket
692
693### SCO 3.2, with different library name for terminfo
694#EXTRA_LIBS = -ltinfo
695
696### UTS2 for Amdahl UTS 2.1.x
697#EXTRA_DEFS = -DUTS2
698#EXTRA_LIBS = -lsocket
699
700### UTS4 for Amdahl UTS 4.x
701#EXTRA_DEFS = -DUTS4 -Xa
702
703### USL for Unix Systems Laboratories (SYSV 4.2)
704#EXTRA_DEFS = -DUSL
705
706### RISCos on MIPS without X11
707#EXTRA_DEFS = -DMIPS
708
709### RISCos on MIPS with X11
710#EXTRA_LIBS = -lsun
711
712### (6) A/UX 3.1.1 with gcc (Jim Jagielski)
713#CC= gcc -D_POSIX_SOURCE
714#CFLAGS= -O2
715#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11
716
717### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)
718### Also use the CONF_TERM_LIB below!
719#EXTRA_LIBS = -lgen
720
721### (D) QNX (by G.F. Desrochers)
722#CFLAGS = -g -O -mf -4
723
724### (F) QNX (by John Oleynick)
725# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment
726# CONF_OPT_X = --without-x.
727# 2. make config
728# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't
729# have -ldir (does config find it somewhere?) and -ltermcap has at
730# least one problem so I use termlib.o instead. The problem with
731# termcap is that it segfaults if you call it with the name of
732# a non-existent terminal type.
733# 4. edit auto/config.h and add #define USE_TMPNAM
734# 5. add termlib.o to OBJ
735# 6. make
736
737### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)
738#EXTRA_LIBS = -lgen
739
740### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)
741#EXTRA_LIBS = -lgen -lnsl
742### For SINIX-Y this is needed for the right prototype of gettimeofday()
743#EXTRA_DEFS = -D_XPG_IV
744
745### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc
746# Use both "-F O3" lines for optimization or the "-g" line for debugging
747#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE
748#CFLAGS = -F O3 -DSINIXN
749#LDFLAGS = -F O3
750#CFLAGS = -g -DSINIXN
751
752### (P) SCO 3.2.42, with different termcap names for some useful keys DJB
753#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY
754#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s
755
756### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz)
757#GUI_INC_LOC = -I/usr/include
758#GUI_LIB_LOC = -L/usr/lib
759#EXTRA_LIBS = -lgen
760
761### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)
762#GUI_INC_LOC = -I/usr/necccs/include
763#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6
764#XROOT = /usr/necccs
765#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6
766#EXTRA_LIBS = -lsocket -lgen
767
768### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
769# Not needed for Irix 5.3, Ives Aerts reported
770#EXTRA_LIBS = -lmalloc -lc_s
771# Irix 4.0, when regexp and regcmp cannot be found when linking:
772#EXTRA_LIBS = -lmalloc -lc_s -lPW
773
774### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag:
775# Note: This newer option style is used with the MipsPro compilers ONLY if
776# you are compiling an "n32" or "64" ABI binary (use either a -n32
777# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag,
778# then the CFLAGS option format will be the typical style (i.e.
779# -Olimit 3000).
780#CFLAGS = -OPT:Olimit=3000 -O
781
782### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new
783# compiler features! Beware, the optimization is EXTREMELY thorough
784# and takes quite a long time.
785# Note: See the note above. Here, the -mips3 option automatically
786# enables either the "n32" or "64" ABI, depending on what machine you
787# are compiling on (n32 is explicitly enabled here, just to make sure).
788#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
789#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
790
791### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64)
792### Suggested by Jon Wright <jon@gate.sinica.edu.tw>.
793### Tested on R8000 IRIX6.1 Power Indigo2.
794### Check /etc/compiler.defaults for your compiler settings.
795# either (for 64 bit pointers) uncomment the following line
796#GUI_LIB_LOC = -L/usr/lib64
797# then
798# 1) make config
799# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line
800# 3) make
801#
802# or (for 32bit pointers) uncomment the following line
803#EXTRA_DEFS = -n32
804#GUI_LIB_LOC = -L/usr/lib32
805# then
806# 1) make config
807# 2) edit auto/config.mk, add -n32 to LDFLAGS
808# 3) make
Bram Moolenaarc4ea3f42008-06-04 13:28:18 +0000809#
810#Alternatively: use -o32 instead of -n32.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000811###
812
813### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library,
814### which is found by configure, doesn't work correctly. Symptom is the
815### error message "Termcap entry too long". Uncomment the next line.
816### On AIX 4.2.1 (and other versions probably), libtermcap is reported
817### not to display properly.
818### after changing this, you need to do "make reconfig".
819#CONF_TERM_LIB = --with-tlib=curses
820
821### (E) If you want to use termlib library instead of the automatically found
822### one. After changing this, you need to do "make reconfig".
823#CONF_TERM_LIB = --with-tlib=termlib
824
825### (a) ESIX V4.2 (Reinhard Wobst)
826#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext
827
Bram Moolenaar311d9822007-02-27 15:48:28 +0000828### (c) Tandem/NSK (Matthew Woehlke)
829#EXTRA_LIBS = -lfloss
830
Bram Moolenaare1d12892004-06-13 13:02:36 +0000831### If you want to use ncurses library instead of the automatically found one
832### after changing this, you need to do "make reconfig".
833#CONF_TERM_LIB = --with-tlib=ncurses
834
835### For GCC on MSDOS, the ".exe" suffix will be added.
836#EXEEXT = .exe
837#LNKEXT = .exe
838
839### (O) For LynxOS 2.5.0, tested on PC.
840#EXTRA_LIBS = -lXext -lSM -lICE -lbsd
841### For LynxOS 3.0.1, tested on PPC
842#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11
843### For LynxOS 3.1.0, tested on PC
844#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu
845
846
847### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove
848### -Qtarget if only in a 5800 environment. (Kipp E. Howard)
849#CFLAGS = -O -Qtarget=m88110compat
850#EXTRA_LIBS = -lgen
851
852##################### end of system specific lines ################### }}}
853
854### Names of the programs and targets {{{1
855VIMTARGET = $(VIMNAME)$(EXEEXT)
856EXTARGET = $(EXNAME)$(LNKEXT)
857VIEWTARGET = $(VIEWNAME)$(LNKEXT)
858GVIMNAME = g$(VIMNAME)
859GVIMTARGET = $(GVIMNAME)$(LNKEXT)
860GVIEWNAME = g$(VIEWNAME)
861GVIEWTARGET = $(GVIEWNAME)$(LNKEXT)
862RVIMNAME = r$(VIMNAME)
863RVIMTARGET = $(RVIMNAME)$(LNKEXT)
864RVIEWNAME = r$(VIEWNAME)
865RVIEWTARGET = $(RVIEWNAME)$(LNKEXT)
866RGVIMNAME = r$(GVIMNAME)
867RGVIMTARGET = $(RGVIMNAME)$(LNKEXT)
868RGVIEWNAME = r$(GVIEWNAME)
869RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT)
870VIMDIFFNAME = $(VIMNAME)diff
871GVIMDIFFNAME = g$(VIMDIFFNAME)
872VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT)
873GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT)
874EVIMNAME = e$(VIMNAME)
875EVIMTARGET = $(EVIMNAME)$(LNKEXT)
876EVIEWNAME = e$(VIEWNAME)
877EVIEWTARGET = $(EVIEWNAME)$(LNKEXT)
878
879### Names of the tools that are also made {{{1
880TOOLS = xxd/xxd$(EXEEXT)
881
882### Installation directories. The defaults come from configure. {{{1
883#
884### prefix the top directory for the data (default "/usr/local")
885#
886# Uncomment the next line to install Vim in your home directory.
887#prefix = $(HOME)
888
889### exec_prefix is the top directory for the executable (default $(prefix))
890#
891# Uncomment the next line to install the Vim executable in "/usr/machine/bin"
892#exec_prefix = /usr/machine
893
894### BINDIR dir for the executable (default "$(exec_prefix)/bin")
895### MANDIR dir for the manual pages (default "$(prefix)/man")
896### DATADIR dir for the other files (default "$(prefix)/lib" or
897# "$(prefix)/share")
898# They may be different when using different architectures for the
899# executable and a common directory for the other files.
900#
901# Uncomment the next line to install Vim in "/usr/bin"
902#BINDIR = /usr/bin
903# Uncomment the next line to install Vim manuals in "/usr/share/man/man1"
904#MANDIR = /usr/share/man
905# Uncomment the next line to install Vim help files in "/usr/share/vim"
906#DATADIR = /usr/share
907
908### DESTDIR root of the installation tree. This is prepended to the other
909# directories. This directory must exist.
910#DESTDIR = ~/pkg/vim
911
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +0000912### Directory of the man pages
913MAN1DIR = /man1
Bram Moolenaare1d12892004-06-13 13:02:36 +0000914
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +0000915### Vim version (adjusted by a script)
916VIMMAJOR = 7
Bram Moolenaarfff2bee2010-05-15 13:56:02 +0200917VIMMINOR = 3a
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +0000918
Bram Moolenaare1d12892004-06-13 13:02:36 +0000919### Location of Vim files (should not need to be changed, and {{{1
920### some things might not work when they are changed!)
921VIMDIR = /vim
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +0000922VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +0000923HELPSUBDIR = /doc
924COLSUBDIR = /colors
925SYNSUBDIR = /syntax
926INDSUBDIR = /indent
Bram Moolenaar87e25fd2005-07-27 21:13:01 +0000927AUTOSUBDIR = /autoload
Bram Moolenaare1d12892004-06-13 13:02:36 +0000928PLUGSUBDIR = /plugin
929FTPLUGSUBDIR = /ftplugin
930LANGSUBDIR = /lang
931COMPSUBDIR = /compiler
932KMAPSUBDIR = /keymap
933MACROSUBDIR = /macros
934TOOLSSUBDIR = /tools
935TUTORSUBDIR = /tutor
Bram Moolenaar217ad922005-03-20 22:37:15 +0000936SPELLSUBDIR = /spell
Bram Moolenaare1d12892004-06-13 13:02:36 +0000937PRINTSUBDIR = /print
938PODIR = po
939
940### VIMLOC common root of the Vim files (all versions)
941### VIMRTLOC common root of the runtime Vim files (this version)
942### VIMRCLOC compiled-in location for global [g]vimrc files (all versions)
943### VIMRUNTIMEDIR compiled-in location for runtime files (optional)
944### HELPSUBLOC location for help files
945### COLSUBLOC location for colorscheme files
946### SYNSUBLOC location for syntax files
947### INDSUBLOC location for indent files
Bram Moolenaar87e25fd2005-07-27 21:13:01 +0000948### AUTOSUBLOC location for standard autoload files
Bram Moolenaare1d12892004-06-13 13:02:36 +0000949### PLUGSUBLOC location for standard plugin files
950### FTPLUGSUBLOC location for ftplugin files
951### LANGSUBLOC location for language files
952### COMPSUBLOC location for compiler files
953### KMAPSUBLOC location for keymap files
954### MACROSUBLOC location for macro files
955### TOOLSSUBLOC location for tools files
956### TUTORSUBLOC location for tutor files
Bram Moolenaar217ad922005-03-20 22:37:15 +0000957### SPELLSUBLOC location for spell files
Bram Moolenaare1d12892004-06-13 13:02:36 +0000958### PRINTSUBLOC location for PostScript files (prolog, latin1, ..)
959### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..)
960### You can override these if you want to install them somewhere else.
961### Edit feature.h for compile-time settings.
962VIMLOC = $(DATADIR)$(VIMDIR)
963VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR)
964VIMRCLOC = $(VIMLOC)
965HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR)
966COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR)
967SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR)
968INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR)
Bram Moolenaar87e25fd2005-07-27 21:13:01 +0000969AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +0000970PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR)
971FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR)
972LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR)
973COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR)
974KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR)
975MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR)
976TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR)
977TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR)
Bram Moolenaar217ad922005-03-20 22:37:15 +0000978SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +0000979PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR)
980SCRIPTLOC = $(VIMRTLOC)
981
982### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and
983### the runtime directory is not below it.
984#VIMRUNTIMEDIR = $(VIMRTLOC)
985
986### Name of the evim file target.
987EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim
988MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim
989
990### Name of the menu file target.
991SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim
992SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim
993SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim
994
995### Name of the bugreport file target.
996SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim
997
998### Name of the file type detection file target.
999SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim
1000
1001### Name of the file type detection file target.
1002SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim
1003
1004### Name of the file type detection script file target.
1005SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim
1006
1007### Name of the ftplugin-on file target.
1008SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim
1009
1010### Name of the ftplugin-off file target.
1011SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim
1012
1013### Name of the indent-on file target.
1014SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim
1015
1016### Name of the indent-off file target.
1017SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim
1018
1019### Name of the option window script file target.
1020SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim
1021
1022# Program to install the program in the target directory. Could also be "mv".
1023INSTALL_PROG = cp
1024
1025# Program to install the data in the target directory. Cannot be "mv"!
1026INSTALL_DATA = cp
1027INSTALL_DATA_R = cp -r
1028
1029### Program to run on installed binary
1030#STRIP = strip
1031
1032### Permissions for binaries {{{1
1033BINMOD = 755
1034
1035### Permissions for man page
1036MANMOD = 644
1037
1038### Permissions for help files
1039HELPMOD = 644
1040
1041### Permissions for Perl and shell scripts
1042SCRIPTMOD = 755
1043
1044### Permission for Vim script files (menu.vim, bugreport.vim, ..)
1045VIMSCRIPTMOD = 644
1046
1047### Permissions for all directories that are created
1048DIRMOD = 755
1049
1050### Permissions for all other files that are created
1051FILEMOD = 644
1052
1053# Where to copy the man and help files from
1054HELPSOURCE = ../runtime/doc
1055
1056# Where to copy the script files from (menu, bugreport)
1057SCRIPTSOURCE = ../runtime
1058
1059# Where to copy the colorscheme files from
1060COLSOURCE = ../runtime/colors
1061
1062# Where to copy the syntax files from
1063SYNSOURCE = ../runtime/syntax
1064
1065# Where to copy the indent files from
1066INDSOURCE = ../runtime/indent
1067
1068# Where to copy the standard plugin files from
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00001069AUTOSOURCE = ../runtime/autoload
1070
1071# Where to copy the standard plugin files from
Bram Moolenaare1d12892004-06-13 13:02:36 +00001072PLUGSOURCE = ../runtime/plugin
1073
1074# Where to copy the ftplugin files from
1075FTPLUGSOURCE = ../runtime/ftplugin
1076
1077# Where to copy the macro files from
1078MACROSOURCE = ../runtime/macros
1079
1080# Where to copy the tools files from
1081TOOLSSOURCE = ../runtime/tools
1082
1083# Where to copy the tutor files from
1084TUTORSOURCE = ../runtime/tutor
1085
Bram Moolenaar217ad922005-03-20 22:37:15 +00001086# Where to copy the spell files from
1087SPELLSOURCE = ../runtime/spell
1088
Bram Moolenaare1d12892004-06-13 13:02:36 +00001089# Where to look for language specific files
1090LANGSOURCE = ../runtime/lang
1091
1092# Where to look for compiler files
1093COMPSOURCE = ../runtime/compiler
1094
1095# Where to look for keymap files
1096KMAPSOURCE = ../runtime/keymap
1097
1098# Where to look for print resource files
1099PRINTSOURCE = ../runtime/print
1100
1101# If you are using Linux, you might want to use this to make vim the
1102# default vi editor, it will create a link from vi to Vim when doing
1103# "make install". An existing file will be overwritten!
1104# When not using it, some make programs can't handle an undefined $(LINKIT).
Bram Moolenaarc4ea3f42008-06-04 13:28:18 +00001105#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi
Bram Moolenaare1d12892004-06-13 13:02:36 +00001106LINKIT = @echo >/dev/null
1107
1108###
1109### GRAPHICAL USER INTERFACE (GUI). {{{1
1110### 'configure --enable-gui' can enable one of these for you if you did set
1111### a corresponding CONF_OPT_GUI above and have X11.
1112### Override configures choice by uncommenting all the following lines.
1113### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF"
1114### for enabling the Athena or Motif GUI.
1115#GUI_SRC = $(NONE_SRC)
1116#GUI_OBJ = $(NONE_OBJ)
1117#GUI_DEFS = $(NONE_DEFS)
1118#GUI_IPATH = $(NONE_IPATH)
1119#GUI_LIBS_DIR = $(NONE_LIBS_DIR)
1120#GUI_LIBS1 = $(NONE_LIBS1)
1121#GUI_LIBS2 = $(NONE_LIBS2)
1122#GUI_INSTALL = $(NONE_INSTALL)
1123#GUI_TARGETS = $(NONE_TARGETS)
1124#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS)
1125#GUI_TESTTARGET = $(NONE_TESTTARGET)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001126#GUI_BUNDLE = $(NONE_BUNDLE)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001127
1128# Without a GUI install the normal way.
1129NONE_INSTALL = install_normal
1130
1131### GTK GUI
1132GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \
1133 gui_beval.c
1134GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \
1135 objects/pty.o objects/gui_gtk_f.o \
1136 objects/gui_beval.o
1137GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO)
1138GTK_IPATH = $(GUI_INC_LOC)
1139GTK_LIBS_DIR = $(GUI_LIB_LOC)
1140GTK_LIBS1 =
1141GTK_LIBS2 = $(GTK_LIBNAME)
Bram Moolenaarb64bb6e2008-06-20 19:29:35 +00001142GTK_INSTALL = install_normal install_gui_extra
Bram Moolenaare1d12892004-06-13 13:02:36 +00001143GTK_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001144GTK_MAN_TARGETS = yes
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001145GTK_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001146GTK_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001147
1148### Motif GUI
Bram Moolenaardfccaf02004-12-31 20:56:11 +00001149MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \
Bram Moolenaarc9b4b052006-04-30 18:54:39 +00001150 gui_xmdlg.c gui_xmebw.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00001151MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \
Bram Moolenaardfccaf02004-12-31 20:56:11 +00001152 objects/pty.o objects/gui_beval.o \
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00001153 objects/gui_xmdlg.o objects/gui_xmebw.o
Bram Moolenaare1d12892004-06-13 13:02:36 +00001154MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO)
1155MOTIF_IPATH = $(GUI_INC_LOC)
1156MOTIF_LIBS_DIR = $(GUI_LIB_LOC)
1157MOTIF_LIBS1 =
1158MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt
Bram Moolenaarb64bb6e2008-06-20 19:29:35 +00001159MOTIF_INSTALL = install_normal install_gui_extra
Bram Moolenaare1d12892004-06-13 13:02:36 +00001160MOTIF_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001161MOTIF_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001162MOTIF_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001163MOTIF_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001164
1165### Athena GUI
1166### Use Xaw3d to make the menus look a little bit nicer
1167#XAW_LIB = -lXaw3d
1168XAW_LIB = -lXaw
1169
1170### When using Xaw3d, uncomment/comment the following lines to also get the
1171### scrollbars from Xaw3d.
1172#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1173#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1174# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1175#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \
1176# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \
1177# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb
1178ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \
1179 gui_at_sb.c gui_at_fs.c
1180ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1181 objects/pty.o objects/gui_beval.o \
1182 objects/gui_at_sb.o objects/gui_at_fs.o
1183ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO)
1184
1185ATHENA_IPATH = $(GUI_INC_LOC)
1186ATHENA_LIBS_DIR = $(GUI_LIB_LOC)
1187ATHENA_LIBS1 = $(XAW_LIB)
1188ATHENA_LIBS2 = -lXt
Bram Moolenaarb64bb6e2008-06-20 19:29:35 +00001189ATHENA_INSTALL = install_normal install_gui_extra
Bram Moolenaare1d12892004-06-13 13:02:36 +00001190ATHENA_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001191ATHENA_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001192ATHENA_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001193ATHENA_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001194
1195### neXtaw GUI
1196NEXTAW_LIB = -lneXtaw
1197
1198NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1199NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1200 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1201NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO)
1202
1203NEXTAW_IPATH = $(GUI_INC_LOC)
1204NEXTAW_LIBS_DIR = $(GUI_LIB_LOC)
1205NEXTAW_LIBS1 = $(NEXTAW_LIB)
1206NEXTAW_LIBS2 = -lXt
Bram Moolenaarb64bb6e2008-06-20 19:29:35 +00001207NEXTAW_INSTALL = install_normal install_gui_extra
Bram Moolenaare1d12892004-06-13 13:02:36 +00001208NEXTAW_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001209NEXTAW_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001210NEXTAW_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001211NEXTAW_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001212
1213### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld
1214# errors: ld: Undefined symbol
1215# _get_wmShellWidgetClass
1216# _get_applicationShellWidgetClass
1217# then you need to get patches 100512-02 and 100573-03 from Sun. In the
1218# meantime, uncomment the following GUI_X_LIBS definition as a workaround:
1219#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext
1220# If you also get cos, sin etc. as undefined symbols, try uncommenting this
1221# too:
1222#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm
1223
Bram Moolenaare1d12892004-06-13 13:02:36 +00001224# PHOTON GUI
1225PHOTONGUI_SRC = gui.c gui_photon.c pty.c
1226PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o
1227PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON
1228PHOTONGUI_IPATH =
1229PHOTONGUI_LIBS_DIR =
1230PHOTONGUI_LIBS1 = -lph -lphexlib
1231PHOTONGUI_LIBS2 =
Bram Moolenaarb64bb6e2008-06-20 19:29:35 +00001232PHOTONGUI_INSTALL = install_normal install_gui_extra
Bram Moolenaare1d12892004-06-13 13:02:36 +00001233PHOTONGUI_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001234PHOTONGUI_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001235PHOTONGUI_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001236PHOTONGUI_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001237
1238# CARBON GUI
1239CARBONGUI_SRC = gui.c gui_mac.c
1240CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o
Bram Moolenaara23ccb82006-02-27 00:08:02 +00001241CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001242 -Wall -Wno-unknown-pragmas \
1243 -mdynamic-no-pic -pipe
1244CARBONGUI_IPATH = -I. -Iproto
Bram Moolenaara23ccb82006-02-27 00:08:02 +00001245CARBONGUI_LIBS_DIR =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001246CARBONGUI_LIBS1 = -framework Carbon
1247CARBONGUI_LIBS2 =
Bram Moolenaar3577c6f2008-06-24 21:16:56 +00001248CARBONGUI_INSTALL = install_macosx
Bram Moolenaare1d12892004-06-13 13:02:36 +00001249CARBONGUI_TARGETS =
1250CARBONGUI_MAN_TARGETS =
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00001251CARBONGUI_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001252CARBONGUI_BUNDLE = gui_bundle
1253APPDIR = $(VIMNAME).app
1254CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001255
1256# All GUI files
Bram Moolenaar9372a112005-12-06 19:59:18 +00001257ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c
Bram Moolenaar323850c2005-01-04 21:24:54 +00001258ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro
Bram Moolenaare1d12892004-06-13 13:02:36 +00001259
1260# }}}
1261
1262### Command to create dependencies based on #include "..."
1263### prototype headers are ignored due to -DPROTO, system
1264### headers #include <...> are ignored if we use the -MM option, as
1265### e.g. provided by gcc-cpp.
1266### Include FEAT_GUI to get gependency on gui.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00001267### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x.
1268CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \
1269 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)`
Bram Moolenaare1d12892004-06-13 13:02:36 +00001270
1271# flags for cproto
1272# This is for cproto 3 patchlevel 8 or below
1273# __inline, __attribute__ and __extension__ are not recognized by cproto
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00001274# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h.
Bram Moolenaar0ab2a882009-05-13 10:51:08 +00001275#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \
1276# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \
1277# -D__extension__= -D__restrict="" \
1278# -D__gnuc_va_list=char -D__builtin_va_list=char
Bram Moolenaare1d12892004-06-13 13:02:36 +00001279
1280#
Bram Moolenaar0ab2a882009-05-13 10:51:08 +00001281# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001282# __inline and __attribute__ are now recognized by cproto
1283# -D"foo()=" is not supported by all compilers so do not use it
Bram Moolenaar0ab2a882009-05-13 10:51:08 +00001284NO_ATTR=
Bram Moolenaare1d12892004-06-13 13:02:36 +00001285#
1286# maybe the "/usr/bin/cc -E" has to be adjusted for some systems
1287# This is for cproto 3.5 patchlevel 3:
1288# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1289#
1290# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
1291# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1292#
1293# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
1294PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR)
1295
1296
1297################################################
1298## no changes required below this line ##
1299################################################
1300
1301SHELL = /bin/sh
1302
1303.SUFFIXES:
Bram Moolenaar9372a112005-12-06 19:59:18 +00001304.SUFFIXES: .c .o .pro
Bram Moolenaare1d12892004-06-13 13:02:36 +00001305
1306PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS)
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001307POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS)
Bram Moolenaarb26e6322010-05-22 21:34:09 +02001308NOPROTO_DEFS = $(PYTHON_NOPROTO)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001309
Bram Moolenaarb26e6322010-05-22 21:34:09 +02001310ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS) $(NOPROTO_DEFS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001311
Bram Moolenaare224ffa2006-03-01 00:01:28 +00001312# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together
1313# with "-E".
1314OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS)
1315
Bram Moolenaar051b7822005-05-19 21:00:46 +00001316LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca
1317
1318LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
Bram Moolenaare1d12892004-06-13 13:02:36 +00001319
1320DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS)
1321
Bram Moolenaarc4ea3f42008-06-04 13:28:18 +00001322# If you have problems with flags that cproto doesn't support, and you are
1323# using GNU make, you can try using the other line to filter out arguments.
1324#PFLAGS = $(PROTO_FLAGS) -DPROTO $(filter -D% -I%, $(LINT_CFLAGS))
Bram Moolenaare1d12892004-06-13 13:02:36 +00001325PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS)
1326
1327ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR)
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001328ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001329
1330# abbreviations
1331DEST_BIN = $(DESTDIR)$(BINDIR)
1332DEST_VIM = $(DESTDIR)$(VIMLOC)
1333DEST_RT = $(DESTDIR)$(VIMRTLOC)
1334DEST_HELP = $(DESTDIR)$(HELPSUBLOC)
1335DEST_COL = $(DESTDIR)$(COLSUBLOC)
1336DEST_SYN = $(DESTDIR)$(SYNSUBLOC)
1337DEST_IND = $(DESTDIR)$(INDSUBLOC)
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00001338DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001339DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC)
1340DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC)
1341DEST_LANG = $(DESTDIR)$(LANGSUBLOC)
1342DEST_COMP = $(DESTDIR)$(COMPSUBLOC)
1343DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC)
1344DEST_MACRO = $(DESTDIR)$(MACROSUBLOC)
1345DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC)
1346DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001347DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001348DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC)
1349DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001350DEST_MAN_TOP = $(DESTDIR)$(MANDIR)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001351
1352# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages.
1353# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/"
1354# directory first.
Bram Moolenaar217ad922005-03-20 22:37:15 +00001355# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too.
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001356DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001357DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR)
1358DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR)
1359DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001360DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001361DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001362DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR)
Bram Moolenaar910f66f2006-04-05 20:41:53 +00001363DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR)
1364DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR)
Bram Moolenaar899dddf2006-03-26 21:06:50 +00001365DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001366DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR)
1367DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001368
1369# BASIC_SRC: files that are always used
1370# GUI_SRC: extra GUI files for current configuration
1371# ALL_GUI_SRC: all GUI files for Unix
1372#
1373# SRC: files used for current configuration
1374# TAGS_SRC: source files used for make tags
1375# TAGS_INCL: include files used for make tags
1376# ALL_SRC: source files used for make depend and make lint
1377
1378TAGS_INCL = *.h
1379
1380BASIC_SRC = \
Bram Moolenaar40e6a712010-05-16 22:32:54 +02001381 blowfish.c \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001382 buffer.c \
1383 charset.c \
1384 diff.c \
1385 digraph.c \
1386 edit.c \
1387 eval.c \
1388 ex_cmds.c \
1389 ex_cmds2.c \
1390 ex_docmd.c \
1391 ex_eval.c \
1392 ex_getln.c \
1393 fileio.c \
1394 fold.c \
1395 getchar.c \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001396 hardcopy.c \
Bram Moolenaarc01140a2006-03-24 22:21:52 +00001397 hashtab.c \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001398 if_cscope.c \
1399 if_xcmdsrv.c \
1400 main.c \
1401 mark.c \
1402 memfile.c \
1403 memline.c \
1404 menu.c \
1405 message.c \
1406 misc1.c \
1407 misc2.c \
1408 move.c \
1409 mbyte.c \
1410 normal.c \
1411 ops.c \
1412 option.c \
1413 os_unix.c \
1414 auto/pathdef.c \
Bram Moolenaarc01140a2006-03-24 22:21:52 +00001415 popupmnu.c \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001416 quickfix.c \
1417 regexp.c \
1418 screen.c \
1419 search.c \
Bram Moolenaar40e6a712010-05-16 22:32:54 +02001420 sha256.c \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001421 spell.c \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001422 syntax.c \
1423 tag.c \
1424 term.c \
1425 ui.c \
1426 undo.c \
1427 version.c \
1428 window.c \
1429 $(OS_EXTRA_SRC)
1430
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001431SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \
1432 $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \
1433 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001434
Bram Moolenaar9372a112005-12-06 19:59:18 +00001435TAGS_SRC = *.c *.cpp if_perl.xs
Bram Moolenaare1d12892004-06-13 13:02:36 +00001436
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001437EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \
1438 if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \
1439 workshop.c wsdebug.c integration.c netbeans.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00001440
1441# All sources, also the ones that are not configured
1442ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC)
1443
1444# Which files to check with lint. Select one of these three lines. ALL_SRC
1445# checks more, but may not work well for checking a GUI that wasn't configured.
1446# The perl sources also don't work well with lint.
1447LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \
1448 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC)
1449#LINT_SRC = $(SRC)
1450#LINT_SRC = $(ALL_SRC)
Bram Moolenaar0ab2a882009-05-13 10:51:08 +00001451#LINT_SRC = $(BASIC_SRC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001452
1453OBJ = \
1454 objects/buffer.o \
Bram Moolenaar40e6a712010-05-16 22:32:54 +02001455 objects/blowfish.o \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001456 objects/charset.o \
1457 objects/diff.o \
1458 objects/digraph.o \
1459 objects/edit.o \
1460 objects/eval.o \
1461 objects/ex_cmds.o \
1462 objects/ex_cmds2.o \
1463 objects/ex_docmd.o \
1464 objects/ex_eval.o \
1465 objects/ex_getln.o \
1466 objects/fileio.o \
1467 objects/fold.o \
1468 objects/getchar.o \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001469 objects/hardcopy.o \
Bram Moolenaarc01140a2006-03-24 22:21:52 +00001470 objects/hashtab.o \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001471 $(HANGULIN_OBJ) \
1472 objects/if_cscope.o \
1473 objects/if_xcmdsrv.o \
1474 objects/main.o \
1475 objects/mark.o \
1476 objects/memfile.o \
1477 objects/memline.o \
1478 objects/menu.o \
1479 objects/message.o \
1480 objects/misc1.o \
1481 objects/misc2.o \
1482 objects/move.o \
1483 objects/mbyte.o \
1484 objects/normal.o \
1485 objects/ops.o \
1486 objects/option.o \
1487 objects/os_unix.o \
1488 objects/pathdef.o \
Bram Moolenaarc01140a2006-03-24 22:21:52 +00001489 objects/popupmnu.o \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001490 objects/quickfix.o \
1491 objects/regexp.o \
1492 objects/screen.o \
1493 objects/search.o \
Bram Moolenaar40e6a712010-05-16 22:32:54 +02001494 objects/sha256.o \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001495 objects/spell.o \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001496 objects/syntax.o \
1497 $(SNIFF_OBJ) \
1498 objects/tag.o \
1499 objects/term.o \
1500 objects/ui.o \
1501 objects/undo.o \
1502 objects/window.o \
1503 $(GUI_OBJ) \
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001504 $(MZSCHEME_OBJ) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001505 $(PERL_OBJ) \
1506 $(PYTHON_OBJ) \
1507 $(TCL_OBJ) \
1508 $(RUBY_OBJ) \
1509 $(OS_EXTRA_OBJ) \
1510 $(WORKSHOP_OBJ) \
1511 $(NETBEANS_OBJ) \
1512 $(WSDEBUG_OBJ)
1513
1514PRO_AUTO = \
Bram Moolenaar40e6a712010-05-16 22:32:54 +02001515 blowfish.pro \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001516 buffer.pro \
1517 charset.pro \
1518 diff.pro \
1519 digraph.pro \
1520 edit.pro \
1521 eval.pro \
1522 ex_cmds.pro \
1523 ex_cmds2.pro \
1524 ex_docmd.pro \
1525 ex_eval.pro \
1526 ex_getln.pro \
1527 fileio.pro \
1528 fold.pro \
1529 getchar.pro \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001530 hardcopy.pro \
Bram Moolenaarc01140a2006-03-24 22:21:52 +00001531 hashtab.pro \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001532 hangulin.pro \
1533 if_cscope.pro \
1534 if_xcmdsrv.pro \
1535 if_python.pro \
1536 if_ruby.pro \
1537 main.pro \
1538 mark.pro \
1539 memfile.pro \
1540 memline.pro \
1541 menu.pro \
1542 message.pro \
1543 misc1.pro \
1544 misc2.pro \
1545 move.pro \
1546 mbyte.pro \
1547 normal.pro \
1548 ops.pro \
1549 option.pro \
1550 os_unix.pro \
Bram Moolenaarc01140a2006-03-24 22:21:52 +00001551 popupmnu.pro \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001552 quickfix.pro \
1553 regexp.pro \
1554 screen.pro \
1555 search.pro \
Bram Moolenaar40e6a712010-05-16 22:32:54 +02001556 sha256.pro \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001557 spell.pro \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001558 syntax.pro \
1559 tag.pro \
1560 term.pro \
1561 termlib.pro \
1562 ui.pro \
1563 undo.pro \
1564 version.pro \
1565 window.pro \
1566 gui_beval.pro \
1567 workshop.pro \
1568 netbeans.pro \
1569 $(ALL_GUI_PRO) \
1570 $(TCL_PRO)
1571
Bram Moolenaar910f66f2006-04-05 20:41:53 +00001572# Resources used for the Mac are in one directory.
1573RSRC_DIR = os_mac_rsrc
Bram Moolenaar7e8fd632006-02-18 22:14:51 +00001574
Bram Moolenaare1d12892004-06-13 13:02:36 +00001575PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
1576 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO)
1577
1578# Default target is making the executable and tools
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00001579all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001580
1581tools: $(TOOLS)
1582
1583# Run configure with all the setting from above.
1584#
1585# Note: auto/config.h doesn't depend on configure, because running configure
1586# doesn't always update auto/config.h. The timestamp isn't changed if the
1587# file contents didn't change (to avoid recompiling everything). Including a
1588# dependency on auto/config.h would cause running configure each time when
1589# auto/config.h isn't updated. The dependency on auto/config.mk should make
1590# sure configure is run when it's needed.
1591#
1592config auto/config.mk: auto/configure config.mk.in config.h.in
1593 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \
1594 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
1595 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
1596 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
1597 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \
1598 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
1599 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
1600 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
1601 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \
1602 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \
Bram Moolenaar3577c6f2008-06-24 21:16:56 +00001603 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \
1604 $(CONF_OPT_SYSMOUSE)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001605
1606# Use "make reconfig" to rerun configure without cached values.
1607# When config.h changes, most things will be recompiled automatically.
Bram Moolenaar592e0a22004-07-03 16:05:59 +00001608# Invoke $(MAKE) to run config with the empty auto/config.mk.
1609# Invoke $(MAKE) to build all with the filled auto/config.mk.
1610reconfig: scratch clean
1611 $(MAKE) -f Makefile config
1612 $(MAKE) -f Makefile all
Bram Moolenaare1d12892004-06-13 13:02:36 +00001613
1614# Run autoconf to produce auto/configure.
1615# Note:
1616# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of
1617# producing auto/configure.
1618# - autoconf is not run automatically, because a patch usually changes both
1619# configure.in and auto/configure but can't update the timestamps. People
1620# who do not have (the correct version of) autoconf would run into trouble.
1621#
1622# Two tricks are required to make autoconf put its output in the "auto" dir:
1623# - Temporarily move the ./configure script to ./configure.save. Don't
1624# overwrite it, it's probably the result of an aborted autoconf.
1625# - Use sed to change ./config.log to auto/config.log in the configure script.
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001626# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take
1627# care of:
1628# - configure.lineno: has the line numbers replaced with $LINENO. That
1629# improves patches a LOT, thus use it instead (until someone says it doesn't
1630# work on some system).
1631# - autom4te.cache directory is created and not cleaned up. Delete it.
1632# - Uses ">config.log" instead of "./config.log".
Bram Moolenaare1d12892004-06-13 13:02:36 +00001633autoconf:
1634 if test ! -f configure.save; then mv configure configure.save; fi
1635 autoconf
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001636 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure
Bram Moolenaare1d12892004-06-13 13:02:36 +00001637 chmod 755 auto/configure
1638 mv -f configure.save configure
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001639 -rm -rf autom4te.cache
Bram Moolenaare1d12892004-06-13 13:02:36 +00001640 -rm -f auto/config.status auto/config.cache
1641
1642# Re-execute this Makefile to include the new auto/config.mk produced by
1643# configure Only used when typing "make" with a fresh auto/config.mk.
1644myself:
1645 $(MAKE) -f Makefile all
1646
1647
1648# The normal command to compile a .c file to its .o file.
1649CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS)
1650
1651
1652# Link the target for normal use or debugging.
1653# A shell script is used to try linking without unneccesary libraries.
1654$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h
1655 $(CCC) version.c -o objects/version.o
1656 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \
1657 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \
1658 MAKE="$(MAKE)" sh $(srcdir)/link.sh
1659
1660xxd/xxd$(EXEEXT): xxd/xxd.c
1661 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \
1662 $(MAKE) -f Makefile
1663
1664# Build the language specific files if they were unpacked.
1665# Generate the converted .mo files separately, it's no problem if this fails.
1666languages:
1667 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001668 cd $(PODIR); \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001669 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001670 fi
1671 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1672 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \
1673 fi
1674
1675# Update the *.po files for changes in the sources. Only run manually.
1676update-po:
1677 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po
1678
1679# Generate function prototypes. This is not needed to compile vim, but if
1680# you want to use it, cproto is out there on the net somewhere -- Webb
1681#
1682# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a
1683# few include files that can not be found, that's OK.
1684
1685proto: $(PRO_AUTO) $(PRO_MANUAL)
1686
1687### Would be nice if this would work for "normal" make.
1688### Currently it only works for (Free)BSD make.
1689#$(PRO_AUTO): $$(*F).c
1690# cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@
1691
1692# Always define FEAT_GUI. This may generate a few warnings if it's also
1693# defined in auto/config.h, you can ignore that.
1694.c.pro:
1695 cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@
1696 echo "/* vim: set ft=c : */" >> proto/$@
1697
1698os_amiga.pro: os_amiga.c
1699 cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@
1700 echo "/* vim: set ft=c : */" >> proto/$@
1701
1702os_msdos.pro: os_msdos.c
1703 cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@
1704 echo "/* vim: set ft=c : */" >> proto/$@
1705
1706os_win16.pro: os_win16.c
1707 cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@
1708 echo "/* vim: set ft=c : */" >> proto/$@
1709
1710os_win32.pro: os_win32.c
1711 cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1712 echo "/* vim: set ft=c : */" >> proto/$@
1713
1714os_mswin.pro: os_mswin.c
1715 cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1716 echo "/* vim: set ft=c : */" >> proto/$@
1717
1718os_beos.pro: os_beos.c
1719 cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@
1720 echo "/* vim: set ft=c : */" >> proto/$@
1721
1722os_vms.pro: os_vms.c
1723# must use os_vms_conf.h for auto/config.h
1724 mv auto/config.h auto/config.h.save
1725 cp os_vms_conf.h auto/config.h
1726 cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@
1727 echo "/* vim: set ft=c : */" >> proto/$@
1728 rm auto/config.h
1729 mv auto/config.h.save auto/config.h
1730
1731# if_perl.pro is special: Use the generated if_perl.c for input and remove
1732# prototypes for local functions.
1733if_perl.pro: auto/if_perl.c
1734 cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@
1735
1736
1737notags:
1738 -rm -f tags
1739
1740# Note: tags is made for the currently configured version, can't include both
1741# Motif and Athena GUI
1742# You can ignore error messages for missing files.
1743tags TAGS: notags
1744 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL)
1745
1746# Make a highlight file for types. Requires Exuberant ctags and awk
1747types: types.vim
1748types.vim: $(TAGS_SRC) $(TAGS_INCL)
1749 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\
1750 awk 'BEGIN{printf("syntax keyword Type\t")}\
1751 {printf("%s ", $$1)}END{print ""}' > $@
1752
1753# Execute the test scripts. Run these after compiling Vim, before installing.
1754# This doesn't depend on $(VIMTARGET), because that won't work when configure
1755# wasn't run yet. Restart make to build it instead.
1756#
1757# This will produce a lot of garbage on your screen, including a few error
1758# messages. Don't worry about that.
1759# If there is a real error, there will be a difference between "test.out" and
1760# a "test99.ok" file.
Bram Moolenaarcd8b20a2009-05-22 16:20:57 +00001761# If everything is alright, the final message will be "ALL DONE". If not you
1762# get "TEST FAILURE".
Bram Moolenaare1d12892004-06-13 13:02:36 +00001763#
1764test check:
1765 $(MAKE) -f Makefile $(VIMTARGET)
Bram Moolenaar1a14c2c2006-03-25 21:52:34 +00001766 -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
Bram Moolenaar316059c2006-01-14 21:18:42 +00001767 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \
1768 fi
Bram Moolenaarc236c162008-07-13 17:41:49 +00001769 -if test $(VIMTARGET) != vim -a ! -r vim; then \
Bram Moolenaar5a305422006-04-28 22:38:25 +00001770 ln -s $(VIMTARGET) vim; \
1771 fi
Bram Moolenaard12f5c12006-01-25 22:10:52 +00001772 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001773
1774testclean:
1775 cd testdir; $(MAKE) -f Makefile clean
Bram Moolenaar316059c2006-01-14 21:18:42 +00001776 if test -d $(PODIR); then \
1777 cd $(PODIR); $(MAKE) checkclean; \
1778 fi
Bram Moolenaare1d12892004-06-13 13:02:36 +00001779
Bram Moolenaarb64bb6e2008-06-20 19:29:35 +00001780install: $(GUI_INSTALL)
1781
1782install_normal: installvim installtools $(INSTALL_LANGS) install-icons
1783
1784install_gui_extra: installgtutorbin
1785
1786installvim: installvimbin installtutorbin \
1787 installruntime installlinks installmanlinks
1788
Bram Moolenaare1d12892004-06-13 13:02:36 +00001789#
1790# Avoid overwriting an existing executable, somebody might be running it and
1791# overwriting it could cause it to crash. Deleting it is OK, it won't be
1792# really deleted until all running processes for it have exited. It is
1793# renamed first, in case the deleting doesn't work.
1794#
1795# If you want to keep an older version, rename it before running "make
1796# install".
1797#
Bram Moolenaare1d12892004-06-13 13:02:36 +00001798installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN)
1799 -if test -f $(DEST_BIN)/$(VIMTARGET); then \
1800 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \
1801 rm -f $(DEST_BIN)/$(VIMNAME).rm; \
1802 fi
1803 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN)
1804 $(STRIP) $(DEST_BIN)/$(VIMTARGET)
1805 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET)
1806# may create a link to the new executable from /usr/bin/vi
1807 -$(LINKIT)
1808
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001809# Long list of arguments for the shell script that installs the manual pages
1810# for one language.
1811INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \
1812 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME)
1813
Bram Moolenaare344bea2005-09-01 20:46:49 +00001814# Install most of the runtime files
1815installruntime: installrtbase installmacros installtutor installspell
Bram Moolenaarc9b4b052006-04-30 18:54:39 +00001816
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001817# install the help files; first adjust the contents for the final location
Bram Moolenaare344bea2005-09-01 20:46:49 +00001818installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001819 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \
Bram Moolenaar18144c82006-04-12 21:52:12 +00001820 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \
1821 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001822 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001823 @echo generating help tags
1824# Generate the help tags with ":helptags" to handle all languages.
1825 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags
1826 cd $(HELPSOURCE); \
1827 files=`ls *.txt tags`; \
1828 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \
1829 $(INSTALL_DATA) $$files $(DEST_HELP); \
1830 cd $(DEST_HELP); \
1831 chmod $(HELPMOD) $$files
1832 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP)
1833 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl
1834# install the menu files
1835 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE)
1836 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE)
1837 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE)
1838 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE)
1839 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE)
1840 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE)
1841# install the evim file
1842 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE)
1843 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE)
1844 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE)
1845 chmod $(VIMSCRIPTMOD) $(EVIM_FILE)
1846# install the bugreport file
1847 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE)
1848 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE)
1849# install the example vimrc files
1850 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT)
1851 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim
1852 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT)
1853 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim
1854# install the file type detection files
1855 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE)
1856 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE)
1857 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE)
1858 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE)
1859 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE)
1860 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE)
1861 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE)
1862 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE)
1863 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE)
1864 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE)
1865 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE)
1866 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE)
1867 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE)
1868 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE)
1869 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE)
1870 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE)
1871# install the print resource files
1872 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT)
1873 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps
1874# install the colorscheme files
1875 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL)
1876 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt
1877# install the syntax files
1878 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN)
1879 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt
1880# install the indent files
1881 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND)
1882 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00001883# install the standard autoload files
1884 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO)
1885 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt
Bram Moolenaar18144c82006-04-12 21:52:12 +00001886 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml
1887 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim
Bram Moolenaare1d12892004-06-13 13:02:36 +00001888# install the standard plugin files
1889 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG)
1890 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt
1891# install the ftplugin files
Bram Moolenaar0387e652010-05-07 16:54:37 +02001892 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001893 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt
1894# install the compiler files
1895 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP)
1896 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt
1897
Bram Moolenaar582fd852005-03-28 20:58:01 +00001898installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001899 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO)
1900 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print`
1901 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print`
1902 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh
1903# When using CVS some CVS directories might have been copied.
1904 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \
1905 if test -n "$$cvs"; then \
1906 rm -rf $$cvs; \
1907 fi
1908
1909# install the tutor files
Bram Moolenaare344bea2005-09-01 20:46:49 +00001910installtutorbin: $(DEST_VIM)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001911 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor
1912 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor
Bram Moolenaarb64bb6e2008-06-20 19:29:35 +00001913
1914installgtutorbin: $(DEST_VIM)
Bram Moolenaar2b570782008-05-07 15:40:33 +00001915 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor
1916 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor
Bram Moolenaare344bea2005-09-01 20:46:49 +00001917
1918installtutor: $(DEST_RT) $(DEST_TUTOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001919 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR)
1920 chmod $(HELPMOD) $(DEST_TUTOR)/*
1921
Bram Moolenaarcee55602005-08-21 22:12:59 +00001922# Install the spell files, if they exist. This assumes at least the English
1923# spell file is there.
Bram Moolenaar582fd852005-03-28 20:58:01 +00001924installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
Bram Moolenaar0e21a3f2005-04-17 20:28:32 +00001925 if test -f $(SPELLSOURCE)/en.latin1.spl; then \
Bram Moolenaardb552d602006-03-23 22:59:57 +00001926 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \
1927 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001928 fi
1929
Bram Moolenaare1d12892004-06-13 13:02:36 +00001930# install helper program xxd
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001931installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001932 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \
1933 $(INSTALL_TOOL_LANGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001934 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \
1935 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \
1936 rm -f $(DEST_BIN)/xxd.rm; \
1937 fi
1938 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN)
1939 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT)
1940 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001941 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001942
Bram Moolenaare1d12892004-06-13 13:02:36 +00001943# install the runtime tools
1944 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS)
1945# When using CVS some CVS directories might have been copied.
1946 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \
1947 if test -n "$$cvs"; then \
1948 rm -rf $$cvs; \
1949 fi
1950 -chmod $(FILEMOD) $(DEST_TOOLS)/*
1951# replace the path in some tools
1952 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl
1953 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1954 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1955 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi
1956 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*`
1957
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001958# install the language specific files for tools, if they were unpacked
1959install-tool-languages:
1960 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1961 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1962 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1963 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1964 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1965 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
Bram Moolenaar899dddf2006-03-26 21:06:50 +00001966 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
Bram Moolenaar910f66f2006-04-05 20:41:53 +00001967 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
Bram Moolenaar899dddf2006-03-26 21:06:50 +00001968 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001969 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1970 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1971
Bram Moolenaare1d12892004-06-13 13:02:36 +00001972# install the language specific files, if they were unpacked
1973install-languages: languages $(DEST_LANG) $(DEST_KMAP)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001974 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1975 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1976 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001977 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001978 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001979 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
Bram Moolenaar899dddf2006-03-26 21:06:50 +00001980 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
Bram Moolenaar910f66f2006-04-05 20:41:53 +00001981 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
Bram Moolenaar899dddf2006-03-26 21:06:50 +00001982 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001983 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001984 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001985 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001986 $(DEST_MAN_FR) $(INSTALLMLARGS)
1987 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1988 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
1989 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1990 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
1991 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001992 $(DEST_MAN_IT) $(INSTALLMLARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001993 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001994 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
1995 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001996 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
1997 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar899dddf2006-03-26 21:06:50 +00001998 $(DEST_MAN_PL) $(INSTALLMLARGS)
1999 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar910f66f2006-04-05 20:41:53 +00002000 $(DEST_MAN_PL_I) $(INSTALLMLARGS)
2001 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar899dddf2006-03-26 21:06:50 +00002002 $(DEST_MAN_PL_U) $(INSTALLMLARGS)
2003 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002004 $(DEST_MAN_RU) $(INSTALLMLARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002005 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2006 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002007 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
2008 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \
2009 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \
2010 fi
2011 if test -d $(LANGSOURCE); then \
2012 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \
2013 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \
2014 fi
2015 if test -d $(KMAPSOURCE); then \
2016 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \
2017 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \
2018 fi
2019
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00002020# install the icons for KDE, if the directory exists and the icon doesn't.
Bram Moolenaare1d12892004-06-13 13:02:36 +00002021ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps
2022ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps
2023ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps
2024KDEPATH = $(HOME)/.kde/share/icons
2025install-icons:
2026 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \
2027 -a ! -f $(ICON48PATH)/gvim.png; then \
2028 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \
2029 fi
2030 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \
2031 -a ! -f $(ICON32PATH)/gvim.png; then \
2032 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \
2033 fi
2034 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \
2035 -a ! -f $(ICON16PATH)/gvim.png; then \
2036 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \
2037 fi
2038
2039
2040$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE):
2041 @echo Runtime files not found.
2042 @echo You need to unpack the runtime archive before running "make install".
2043 test -f error
2044
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002045$(DESTDIR)$(exec_prefix) $(DEST_BIN) \
2046 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00002047 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \
2048 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \
Bram Moolenaar217ad922005-03-20 22:37:15 +00002049 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \
Bram Moolenaar18144c82006-04-12 21:52:12 +00002050 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG):
Bram Moolenaare1d12892004-06-13 13:02:36 +00002051 -$(SHELL) ./mkinstalldirs $@
2052 -chmod $(DIRMOD) $@
2053
2054# create links from various names to vim. This is only done when the links
2055# (or executables with the same name) don't exist yet.
2056installlinks: $(GUI_TARGETS) \
2057 $(DEST_BIN)/$(EXTARGET) \
2058 $(DEST_BIN)/$(VIEWTARGET) \
2059 $(DEST_BIN)/$(RVIMTARGET) \
2060 $(DEST_BIN)/$(RVIEWTARGET) \
2061 $(INSTALLVIMDIFF)
2062
2063installglinks: $(DEST_BIN)/$(GVIMTARGET) \
2064 $(DEST_BIN)/$(GVIEWTARGET) \
2065 $(DEST_BIN)/$(RGVIMTARGET) \
2066 $(DEST_BIN)/$(RGVIEWTARGET) \
2067 $(DEST_BIN)/$(EVIMTARGET) \
2068 $(DEST_BIN)/$(EVIEWTARGET) \
2069 $(INSTALLGVIMDIFF)
2070
2071installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET)
2072installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET)
2073
2074$(DEST_BIN)/$(EXTARGET):
2075 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET)
2076
2077$(DEST_BIN)/$(VIEWTARGET):
2078 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET)
2079
2080$(DEST_BIN)/$(GVIMTARGET):
2081 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET)
2082
2083$(DEST_BIN)/$(GVIEWTARGET):
2084 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET)
2085
2086$(DEST_BIN)/$(RVIMTARGET):
2087 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET)
2088
2089$(DEST_BIN)/$(RVIEWTARGET):
2090 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET)
2091
2092$(DEST_BIN)/$(RGVIMTARGET):
2093 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET)
2094
2095$(DEST_BIN)/$(RGVIEWTARGET):
2096 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET)
2097
2098$(DEST_BIN)/$(VIMDIFFTARGET):
2099 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET)
2100
2101$(DEST_BIN)/$(GVIMDIFFTARGET):
2102 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET)
2103
2104$(DEST_BIN)/$(EVIMTARGET):
2105 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET)
2106
2107$(DEST_BIN)/$(EVIEWTARGET):
2108 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET)
2109
Bram Moolenaardb552d602006-03-23 22:59:57 +00002110# Create links for the manual pages with various names to vim. This is only
Bram Moolenaare1d12892004-06-13 13:02:36 +00002111# done when the links (or manpages with the same name) don't exist yet.
Bram Moolenaare1d12892004-06-13 13:02:36 +00002112
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002113INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \
2114 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \
2115 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \
2116 $(GVIMDIFFNAME) $(EVIEWNAME)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002117
Bram Moolenaarc9b4b052006-04-30 18:54:39 +00002118installmanlinks:
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002119 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2120 $(DEST_MAN) $(INSTALLMLARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002121
2122uninstall: uninstall_runtime
2123 -rm -f $(DEST_BIN)/$(VIMTARGET)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002124 -rm -f $(DEST_BIN)/vimtutor
Bram Moolenaar2b570782008-05-07 15:40:33 +00002125 -rm -f $(DEST_BIN)/gvimtutor
Bram Moolenaare1d12892004-06-13 13:02:36 +00002126 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET)
2127 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET)
2128 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET)
2129 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET)
2130 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET)
2131 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002132 -rm -f $(DEST_BIN)/xxd$(EXEEXT)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002133
2134# Note: the "rmdir" will fail if any files were added after "make install"
2135uninstall_runtime:
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002136 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002137 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS)
2138 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS)
2139 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002140 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS)
Bram Moolenaar217ad922005-03-20 22:37:15 +00002141 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002142 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS)
Bram Moolenaar899dddf2006-03-26 21:06:50 +00002143 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS)
Bram Moolenaar910f66f2006-04-05 20:41:53 +00002144 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS)
Bram Moolenaar899dddf2006-03-26 21:06:50 +00002145 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002146 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS)
2147 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002148 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2149 $(DEST_MAN) $(INSTALLMLARGS)
2150 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002151 $(DEST_MAN_FR) $(INSTALLMLARGS)
2152 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2153 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
2154 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2155 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
2156 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002157 $(DEST_MAN_IT) $(INSTALLMLARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002158 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar217ad922005-03-20 22:37:15 +00002159 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
2160 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002161 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
2162 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar899dddf2006-03-26 21:06:50 +00002163 $(DEST_MAN_PL) $(INSTALLMLARGS)
2164 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar910f66f2006-04-05 20:41:53 +00002165 $(DEST_MAN_PL_I) $(INSTALLMLARGS)
2166 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar899dddf2006-03-26 21:06:50 +00002167 $(DEST_MAN_PL_U) $(INSTALLMLARGS)
2168 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002169 $(DEST_MAN_RU) $(INSTALLMLARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002170 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2171 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
2172 -rm -f $(DEST_MAN)/xxd.1
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002173 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1
Bram Moolenaar217ad922005-03-20 22:37:15 +00002174 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1
Bram Moolenaar910f66f2006-04-05 20:41:53 +00002175 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002176 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1
Bram Moolenaare1d12892004-06-13 13:02:36 +00002177 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl
2178 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-??
2179 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE)
2180 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE)
2181 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim
2182 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE)
2183 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE)
2184 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE)
2185 -rm -f $(SYS_OPTWIN_FILE)
2186 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt
2187 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt
2188 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt
2189 -rm -rf $(DEST_MACRO)
2190 -rm -rf $(DEST_TUTOR)
Bram Moolenaar217ad922005-03-20 22:37:15 +00002191 -rm -rf $(DEST_SPELL)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002192 -rm -rf $(DEST_TOOLS)
2193 -rm -rf $(DEST_LANG)
2194 -rm -rf $(DEST_KMAP)
2195 -rm -rf $(DEST_COMP)
2196 -rm -f $(DEST_PRINT)/*.ps
2197 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND)
2198 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt
Bram Moolenaar18144c82006-04-12 21:52:12 +00002199 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim
Bram Moolenaare1d12892004-06-13 13:02:36 +00002200 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt
Bram Moolenaar18144c82006-04-12 21:52:12 +00002201 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002202# This will fail when other Vim versions are installed, no worries.
2203 -rmdir $(DEST_VIM)
2204
2205# Clean up all the files that have been produced, except configure's.
2206# We support common typing mistakes for Juergen! :-)
2207clean celan: testclean
Bram Moolenaar5a305422006-04-28 22:38:25 +00002208 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o
Bram Moolenaare1d12892004-06-13 13:02:36 +00002209 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c
2210 -rm -f conftest* *~ auto/link.sed
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002211 -rm -rf $(APPDIR)
Bram Moolenaar9e70cf12009-05-26 20:59:55 +00002212 -rm -rf mzscheme_base.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00002213 if test -d $(PODIR); then \
2214 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \
2215 fi
2216
2217# Make a shadow directory for compilation on another system or with different
2218# features.
2219SHADOWDIR = shadow
2220
2221shadow: runtime pixmaps
2222 mkdir $(SHADOWDIR)
Bram Moolenaarc4ea3f42008-06-04 13:28:18 +00002223 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs .
Bram Moolenaare1d12892004-06-13 13:02:36 +00002224 mkdir $(SHADOWDIR)/auto
2225 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure .
2226 cd $(SHADOWDIR); rm -f auto/link.sed
2227 cp Makefile configure $(SHADOWDIR)
2228 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist
2229 cp config.mk.dist $(SHADOWDIR)/auto/config.mk
2230 cp config.mk.dist $(SHADOWDIR)
2231 mkdir $(SHADOWDIR)/xxd
2232 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* .
Bram Moolenaar910f66f2006-04-05 20:41:53 +00002233 if test -d $(RSRC_DIR); then \
Bram Moolenaar7e8fd632006-02-18 22:14:51 +00002234 cd $(SHADOWDIR); \
Bram Moolenaar70fc5272006-05-13 10:55:25 +00002235 ln -s ../infplist.xml .; \
Bram Moolenaar910f66f2006-04-05 20:41:53 +00002236 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \
Bram Moolenaar7e8fd632006-02-18 22:14:51 +00002237 fi
Bram Moolenaare1d12892004-06-13 13:02:36 +00002238 mkdir $(SHADOWDIR)/testdir
2239 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \
2240 ../../testdir/vimrc.unix \
2241 ../../testdir/*.in \
Bram Moolenaarc4ea3f42008-06-04 13:28:18 +00002242 ../../testdir/*.vim \
Bram Moolenaare1d12892004-06-13 13:02:36 +00002243 ../../testdir/*.ok .
2244
2245# Link needed for doing "make install" in a shadow directory.
2246runtime:
2247 -ln -s ../runtime .
2248
2249# Link needed for doing "make" using GTK in a shadow directory.
2250pixmaps:
2251 -ln -s ../pixmaps .
2252
2253# Update the synmenu.vim file with the latest Syntax menu.
2254# This is only needed when runtime/makemenu.vim was changed.
2255menu: ./vim ../runtime/makemenu.vim
2256 ./vim -u ../runtime/makemenu.vim
2257
2258# Start configure from scratch
2259scrub scratch:
2260 -rm -f auto/config.status auto/config.cache config.log auto/config.log
2261 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk
2262 touch auto/config.h
2263 cp config.mk.dist auto/config.mk
2264
2265distclean: clean scratch
2266 -rm -f tags
2267
2268dist: distclean
2269 @echo
2270 @echo Making the distribution has to be done in the top directory
2271
2272mdepend:
2273 -@rm -f Makefile~
2274 cp Makefile Makefile~
2275 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2276 @for i in $(ALL_SRC) ; do \
2277 echo "$$i" ; \
2278 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\
2279 $(CPP) $$i |\
2280 grep '^# .*"\./.*\.h"' |\
2281 sort -t'"' -u +1 -2 |\
2282 sed -e 's/.*"\.\/\(.*\)".*/\1/'\
2283 ` >> tmp_make ; \
2284 done
2285 mv tmp_make Makefile
2286
2287depend:
2288 -@rm -f Makefile~
2289 cp Makefile Makefile~
2290 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2291 -for i in $(ALL_SRC); do echo $$i; \
2292 $(CPP_DEPEND) $$i | \
2293 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done
2294 mv tmp_make Makefile
2295
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002296# Run lint. Clean up the *.ln files that are sometimes left behind.
Bram Moolenaare1d12892004-06-13 13:02:36 +00002297lint:
Bram Moolenaar0ab2a882009-05-13 10:51:08 +00002298 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC)
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002299 -rm -f *.ln
Bram Moolenaare1d12892004-06-13 13:02:36 +00002300
2301# Check dosinst.c with lint.
2302lintinstall:
Bram Moolenaar0ab2a882009-05-13 10:51:08 +00002303 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002304 -rm -f dosinst.ln
Bram Moolenaare1d12892004-06-13 13:02:36 +00002305
2306###########################################################################
2307
2308.c.o:
2309 $(CCC) $<
2310
Bram Moolenaare1d12892004-06-13 13:02:36 +00002311auto/if_perl.c: if_perl.xs
2312 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@
2313 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \
2314 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@
2315
2316auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in
Bram Moolenaare224ffa2006-03-01 00:01:28 +00002317 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh
Bram Moolenaare1d12892004-06-13 13:02:36 +00002318
Bram Moolenaarde947682006-09-02 14:32:22 +00002319QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
Bram Moolenaare1d12892004-06-13 13:02:36 +00002320auto/pathdef.c: Makefile auto/config.mk
2321 -@echo creating $@
2322 -@echo '/* pathdef.c */' > $@
2323 -@echo '/* This file is automatically created by Makefile' >> $@
2324 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@
2325 -@echo '#include "vim.h"' >> $@
2326 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@
2327 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@
2328 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@
2329 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@
2330 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@
2331 -@if test -n "$(COMPILEDBY)"; then \
2332 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \
2333 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi
2334 -@echo '";' >> $@
2335 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@
2336 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi
2337 -@echo '";' >> $@
2338 -@sh $(srcdir)/pathdef.sh
2339
2340# All the object files are put in the "objects" directory. Since not all make
2341# commands understand putting object files in another directory, it must be
2342# specified for each file separately.
2343
2344objects:
2345 mkdir objects
2346
Bram Moolenaar40e6a712010-05-16 22:32:54 +02002347objects/blowfish.o: blowfish.c
2348 $(CCC) -o $@ blowfish.c
2349
Bram Moolenaare1d12892004-06-13 13:02:36 +00002350objects/buffer.o: buffer.c
2351 $(CCC) -o $@ buffer.c
2352
2353objects/charset.o: charset.c
2354 $(CCC) -o $@ charset.c
2355
2356objects/diff.o: diff.c
2357 $(CCC) -o $@ diff.c
2358
2359objects/digraph.o: digraph.c
2360 $(CCC) -o $@ digraph.c
2361
2362objects/edit.o: edit.c
2363 $(CCC) -o $@ edit.c
2364
2365objects/eval.o: eval.c
2366 $(CCC) -o $@ eval.c
2367
2368objects/ex_cmds.o: ex_cmds.c
2369 $(CCC) -o $@ ex_cmds.c
2370
2371objects/ex_cmds2.o: ex_cmds2.c
2372 $(CCC) -o $@ ex_cmds2.c
2373
2374objects/ex_docmd.o: ex_docmd.c
2375 $(CCC) -o $@ ex_docmd.c
2376
2377objects/ex_eval.o: ex_eval.c
2378 $(CCC) -o $@ ex_eval.c
2379
2380objects/ex_getln.o: ex_getln.c
2381 $(CCC) -o $@ ex_getln.c
2382
2383objects/fileio.o: fileio.c
2384 $(CCC) -o $@ fileio.c
2385
2386objects/fold.o: fold.c
2387 $(CCC) -o $@ fold.c
2388
2389objects/getchar.o: getchar.c
2390 $(CCC) -o $@ getchar.c
2391
Bram Moolenaar58d98232005-07-23 22:25:46 +00002392objects/hardcopy.o: hardcopy.c
2393 $(CCC) -o $@ hardcopy.c
2394
Bram Moolenaarc01140a2006-03-24 22:21:52 +00002395objects/hashtab.o: hashtab.c
2396 $(CCC) -o $@ hashtab.c
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00002397
Bram Moolenaare1d12892004-06-13 13:02:36 +00002398objects/gui.o: gui.c
2399 $(CCC) -o $@ gui.c
2400
2401objects/gui_at_fs.o: gui_at_fs.c
2402 $(CCC) -o $@ gui_at_fs.c
2403
2404objects/gui_at_sb.o: gui_at_sb.c
2405 $(CCC) -o $@ gui_at_sb.c
2406
2407objects/gui_athena.o: gui_athena.c
2408 $(CCC) -o $@ gui_athena.c
2409
Bram Moolenaare1d12892004-06-13 13:02:36 +00002410objects/gui_beval.o: gui_beval.c
2411 $(CCC) -o $@ gui_beval.c
2412
2413objects/gui_gtk.o: gui_gtk.c
2414 $(CCC) -o $@ gui_gtk.c
2415
2416objects/gui_gtk_f.o: gui_gtk_f.c
2417 $(CCC) -o $@ gui_gtk_f.c
2418
2419objects/gui_gtk_x11.o: gui_gtk_x11.c
2420 $(CCC) -o $@ gui_gtk_x11.c
2421
2422objects/gui_motif.o: gui_motif.c
2423 $(CCC) -o $@ gui_motif.c
2424
Bram Moolenaardfccaf02004-12-31 20:56:11 +00002425objects/gui_xmdlg.o: gui_xmdlg.c
2426 $(CCC) -o $@ gui_xmdlg.c
2427
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00002428objects/gui_xmebw.o: gui_xmebw.c
2429 $(CCC) -o $@ gui_xmebw.c
2430
Bram Moolenaare1d12892004-06-13 13:02:36 +00002431objects/gui_x11.o: gui_x11.c
2432 $(CCC) -o $@ gui_x11.c
2433
2434objects/gui_photon.o: gui_photon.c
2435 $(CCC) -o $@ gui_photon.c
2436
2437objects/gui_mac.o: gui_mac.c
2438 $(CCC) -o $@ gui_mac.c
2439
2440objects/hangulin.o: hangulin.c
2441 $(CCC) -o $@ hangulin.c
2442
2443objects/if_cscope.o: if_cscope.c
2444 $(CCC) -o $@ if_cscope.c
2445
2446objects/if_xcmdsrv.o: if_xcmdsrv.c
2447 $(CCC) -o $@ if_xcmdsrv.c
2448
Bram Moolenaar9e70cf12009-05-26 20:59:55 +00002449objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA)
Bram Moolenaarcd8b20a2009-05-22 16:20:57 +00002450 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c
Bram Moolenaar9e70cf12009-05-26 20:59:55 +00002451
2452mzscheme_base.c:
2453 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base
Bram Moolenaar325b7a22004-07-05 15:58:32 +00002454
Bram Moolenaare1d12892004-06-13 13:02:36 +00002455objects/if_perl.o: auto/if_perl.c
2456 $(CCC) -o $@ auto/if_perl.c
2457
2458objects/if_perlsfio.o: if_perlsfio.c
2459 $(CCC) -o $@ if_perlsfio.c
2460
2461objects/if_python.o: if_python.c
Bram Moolenaarcd8b20a2009-05-22 16:20:57 +00002462 $(CCC) -o $@ $(PYTHON_CFLAGS_EXTRA) if_python.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00002463
2464objects/if_ruby.o: if_ruby.c
2465 $(CCC) -o $@ if_ruby.c
2466
2467objects/if_sniff.o: if_sniff.c
2468 $(CCC) -o $@ if_sniff.c
2469
2470objects/if_tcl.o: if_tcl.c
2471 $(CCC) -o $@ if_tcl.c
2472
2473objects/integration.o: integration.c
2474 $(CCC) -o $@ integration.c
2475
2476objects/main.o: main.c
2477 $(CCC) -o $@ main.c
2478
2479objects/mark.o: mark.c
2480 $(CCC) -o $@ mark.c
2481
2482objects/memfile.o: memfile.c
2483 $(CCC) -o $@ memfile.c
2484
2485objects/memline.o: memline.c
2486 $(CCC) -o $@ memline.c
2487
2488objects/menu.o: menu.c
2489 $(CCC) -o $@ menu.c
2490
2491objects/message.o: message.c
2492 $(CCC) -o $@ message.c
2493
2494objects/misc1.o: misc1.c
2495 $(CCC) -o $@ misc1.c
2496
2497objects/misc2.o: misc2.c
2498 $(CCC) -o $@ misc2.c
2499
2500objects/move.o: move.c
2501 $(CCC) -o $@ move.c
2502
2503objects/mbyte.o: mbyte.c
2504 $(CCC) -o $@ mbyte.c
2505
2506objects/normal.o: normal.c
2507 $(CCC) -o $@ normal.c
2508
2509objects/ops.o: ops.c
2510 $(CCC) -o $@ ops.c
2511
2512objects/option.o: option.c
2513 $(CCC) -o $@ option.c
2514
2515objects/os_beos.o: os_beos.c
2516 $(CCC) -o $@ os_beos.c
2517
2518objects/os_qnx.o: os_qnx.c
2519 $(CCC) -o $@ os_qnx.c
2520
2521objects/os_macosx.o: os_macosx.c
2522 $(CCC) -o $@ os_macosx.c
2523
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002524objects/os_mac_conv.o: os_mac_conv.c
2525 $(CCC) -o $@ os_mac_conv.c
2526
Bram Moolenaare1d12892004-06-13 13:02:36 +00002527objects/os_unix.o: os_unix.c
2528 $(CCC) -o $@ os_unix.c
2529
2530objects/pathdef.o: auto/pathdef.c
2531 $(CCC) -o $@ auto/pathdef.c
2532
2533objects/py_config.o: $(PYTHON_CONFDIR)/config.c
2534 $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \
2535 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
2536
2537objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c
2538 $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \
2539 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \
2540 $(PYTHON_GETPATH_CFLAGS)
2541
2542objects/pty.o: pty.c
2543 $(CCC) -o $@ pty.c
2544
Bram Moolenaarc01140a2006-03-24 22:21:52 +00002545objects/popupmnu.o: popupmnu.c
2546 $(CCC) -o $@ popupmnu.c
Bram Moolenaar1c7715d2005-10-03 22:02:18 +00002547
Bram Moolenaare1d12892004-06-13 13:02:36 +00002548objects/quickfix.o: quickfix.c
2549 $(CCC) -o $@ quickfix.c
2550
2551objects/regexp.o: regexp.c
2552 $(CCC) -o $@ regexp.c
2553
2554objects/screen.o: screen.c
2555 $(CCC) -o $@ screen.c
2556
2557objects/search.o: search.c
2558 $(CCC) -o $@ search.c
2559
Bram Moolenaar40e6a712010-05-16 22:32:54 +02002560objects/sha256.o: sha256.c
2561 $(CCC) -o $@ sha256.c
2562
Bram Moolenaar217ad922005-03-20 22:37:15 +00002563objects/spell.o: spell.c
2564 $(CCC) -o $@ spell.c
2565
Bram Moolenaare1d12892004-06-13 13:02:36 +00002566objects/syntax.o: syntax.c
2567 $(CCC) -o $@ syntax.c
2568
2569objects/tag.o: tag.c
2570 $(CCC) -o $@ tag.c
2571
2572objects/term.o: term.c
2573 $(CCC) -o $@ term.c
2574
2575objects/ui.o: ui.c
2576 $(CCC) -o $@ ui.c
2577
2578objects/undo.o: undo.c
2579 $(CCC) -o $@ undo.c
2580
2581objects/window.o: window.c
2582 $(CCC) -o $@ window.c
2583
2584objects/workshop.o: workshop.c
2585 $(CCC) -o $@ workshop.c
2586
2587objects/wsdebug.o: wsdebug.c
2588 $(CCC) -o $@ wsdebug.c
2589
2590objects/netbeans.o: netbeans.c
2591 $(CCC) -o $@ netbeans.c
2592
2593Makefile:
2594 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!!
2595
2596###############################################################################
2597### MacOS X installation
2598###
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002599### This installs a runnable Vim.app in $(prefix)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002600
2601REZ = /Developer/Tools/Rez
Bram Moolenaare1d12892004-06-13 13:02:36 +00002602RESDIR = $(APPDIR)/Contents/Resources
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00002603VERSION = $(VIMMAJOR).$(VIMMINOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002604
2605### Common flags
2606M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \
Bram Moolenaar910f66f2006-04-05 20:41:53 +00002607 -DAPP_VER=$(VERSION)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002608
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002609install_macosx: gui_bundle
Bram Moolenaare344bea2005-09-01 20:46:49 +00002610# Remove the link to the runtime dir, don't want to copy all of that.
Bram Moolenaar56718732006-03-15 22:53:57 +00002611 -rm $(RESDIR)/vim/runtime
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002612 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix)
Bram Moolenaardb552d602006-03-23 22:59:57 +00002613# Generate the help tags file now, it won't work with "make installruntime".
2614 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags
Bram Moolenaare344bea2005-09-01 20:46:49 +00002615# Install the runtime files. Recursive!
Bram Moolenaar56718732006-03-15 22:53:57 +00002616 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
2617# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin
Bram Moolenaare344bea2005-09-01 20:46:49 +00002618 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \
2619 VIMEXE=$$srcdir/$(VIMTARGET) \
Bram Moolenaarce51ebc2008-01-04 10:54:50 +00002620 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
2621 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \
2622 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \
2623 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
2624 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime
Bram Moolenaare344bea2005-09-01 20:46:49 +00002625# Put the link back.
Bram Moolenaar56718732006-03-15 22:53:57 +00002626 ln -s `pwd`/../runtime $(RESDIR)/vim
Bram Moolenaara38edcd2007-05-10 17:46:55 +00002627# Copy rgb.txt, Mac doesn't always have X11
2628 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
Bram Moolenaar3577c6f2008-06-24 21:16:56 +00002629# TODO: Create the vimtutor and/or gvimtutor application.
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002630
Bram Moolenaar56718732006-03-15 22:53:57 +00002631gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \
Bram Moolenaare1d12892004-06-13 13:02:36 +00002632 bundle-language
2633
Bram Moolenaar56718732006-03-15 22:53:57 +00002634$(RESDIR):
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002635 mkdir -p $@
2636
Bram Moolenaare1d12892004-06-13 13:02:36 +00002637bundle-dir: $(APPDIR)/Contents $(VIMTARGET)
Bram Moolenaare344bea2005-09-01 20:46:49 +00002638# Make a link to the runtime directory, so that we can try out the executable
2639# without installing it.
Bram Moolenaar56718732006-03-15 22:53:57 +00002640 mkdir -p $(RESDIR)/vim
2641 -ln -s `pwd`/../runtime $(RESDIR)/vim
Bram Moolenaare1d12892004-06-13 13:02:36 +00002642
2643bundle-executable: $(VIMTARGET)
Bram Moolenaar56718732006-03-15 22:53:57 +00002644 mkdir -p $(APPDIR)/Contents/MacOS
Bram Moolenaare1d12892004-06-13 13:02:36 +00002645 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET)
2646
2647bundle-info: bundle-dir
2648 @echo "Creating PkgInfo"
2649 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo
2650 @echo "Creating Info.plist"
2651 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist
2652
Bram Moolenaar910f66f2006-04-05 20:41:53 +00002653bundle-resource: bundle-dir bundle-rsrc
2654 cp -f $(RSRC_DIR)/*.icns $(RESDIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002655
2656### Classic resources
2657# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9)
2658# This file is also required for OS X Vim.
2659bundle-rsrc: os_mac.rsr.hqx
2660 @echo "Creating resource fork"
2661 python dehqx.py $<
2662 rm -f gui_mac.rsrc
2663 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc
2664
2665# po/Make_osx.pl says something about generating a Mac message file
2666# for Ukrananian. Would somebody using Mac OS X in Ukranian
2667# *really* be upset that Carbon Vim was not localised in
2668# Ukranian?
2669#
2670#bundle-language: bundle-dir po/Make_osx.pl
2671# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG)
2672bundle-language: bundle-dir
2673
2674$(APPDIR)/Contents:
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002675 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS
2676 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj
Bram Moolenaare1d12892004-06-13 13:02:36 +00002677
Bram Moolenaare1d12892004-06-13 13:02:36 +00002678
2679###############################################################################
2680### (automatically generated by 'make depend')
2681### Dependencies:
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002682objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \
2683 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2684 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2685 globals.h farsi.h arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002686objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002687 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2688 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2689 arabic.h version.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002690objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002691 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2692 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2693 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002694objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002695 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2696 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2697 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002698objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002699 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2700 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2701 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002702objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002703 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2704 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2705 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002706objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002707 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2708 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2709 arabic.h version.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002710objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002711 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2712 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2713 arabic.h version.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002714objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002715 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2716 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2717 globals.h farsi.h arabic.h version.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002718objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002719 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2720 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2721 globals.h farsi.h arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002722objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002723 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2724 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2725 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002726objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002727 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2728 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2729 globals.h farsi.h arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002730objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002731 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2732 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2733 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002734objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002735 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2736 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2737 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002738objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002739 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2740 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2741 arabic.h
Bram Moolenaar58d98232005-07-23 22:25:46 +00002742objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002743 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2744 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2745 globals.h farsi.h arabic.h version.h
Bram Moolenaarc01140a2006-03-24 22:21:52 +00002746objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002747 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2748 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2749 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002750objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002751 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2752 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2753 globals.h farsi.h arabic.h if_cscope.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002754objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002755 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2756 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2757 globals.h farsi.h arabic.h version.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002758objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002759 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2760 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2761 arabic.h farsi.c arabic.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00002762objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002763 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2764 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2765 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002766objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002767 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2768 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2769 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002770objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002771 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2772 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2773 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002774objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002775 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2776 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2777 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002778objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002779 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2780 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2781 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002782objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002783 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2784 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2785 arabic.h version.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002786objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002787 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2788 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2789 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002790objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002791 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2792 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2793 arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002794objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002795 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2796 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2797 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002798objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002799 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2800 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2801 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002802objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002803 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2804 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002805objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002806 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2807 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2808 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002809objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002810 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2811 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2812 arabic.h if_mzsch.h os_unixx.h
2813objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \
2814 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2815 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2816 globals.h farsi.h arabic.h
Bram Moolenaarc01140a2006-03-24 22:21:52 +00002817objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002818 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2819 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2820 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002821objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002822 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2823 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2824 globals.h farsi.h arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002825objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002826 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2827 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2828 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002829objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002830 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2831 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2832 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002833objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002834 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2835 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2836 arabic.h
2837objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2838 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2839 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2840 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002841objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002842 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2843 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2844 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002845objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002846 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2847 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2848 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002849objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002850 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2851 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002852objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002853 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2854 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2855 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002856objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002857 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2858 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002859objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002860 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2861 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2862 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002863objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002864 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2865 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2866 arabic.h version.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002867objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002868 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2869 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2870 arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002871objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002872 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2873 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
Bram Moolenaar202795b2005-10-11 20:29:39 +00002874objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002875 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2876 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2877 globals.h farsi.h arabic.h ../pixmaps/stock_icons.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002878objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002879 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2880 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2881 globals.h farsi.h arabic.h gui_gtk_f.h
Bram Moolenaar202795b2005-10-11 20:29:39 +00002882objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002883 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2884 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2885 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \
2886 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \
2887 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \
2888 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \
2889 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \
2890 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2891 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2892 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2893 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2894 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2895 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2896 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2897 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2898 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2899 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2900 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2901 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2902 ../pixmaps/tb_minwidth.xpm
Bram Moolenaar202795b2005-10-11 20:29:39 +00002903objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002904 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2905 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2906 globals.h farsi.h arabic.h
Bram Moolenaar202795b2005-10-11 20:29:39 +00002907objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002908 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2909 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2910 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h
Bram Moolenaar202795b2005-10-11 20:29:39 +00002911objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002912 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2913 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2914 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \
2915 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \
2916 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \
2917 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2918 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2919 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2920 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2921 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2922 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2923 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2924 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2925 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2926 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2927 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2928 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2929 ../pixmaps/tb_minwidth.xpm
Bram Moolenaar202795b2005-10-11 20:29:39 +00002930objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002931 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2932 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2933 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \
2934 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
Bram Moolenaar202795b2005-10-11 20:29:39 +00002935objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002936 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2937 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2938 arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \
2939 ../runtime/vim48x48.xpm
Bram Moolenaar202795b2005-10-11 20:29:39 +00002940objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002941 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2942 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2943 globals.h farsi.h arabic.h gui_at_sb.h
Bram Moolenaar202795b2005-10-11 20:29:39 +00002944objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002945 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2946 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2947 globals.h farsi.h arabic.h gui_at_sb.h
Bram Moolenaar202795b2005-10-11 20:29:39 +00002948objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002949 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2950 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002951objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002952 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2953 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2954 globals.h farsi.h arabic.h
Bram Moolenaarc01140a2006-03-24 22:21:52 +00002955objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002956 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2957 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2958 globals.h farsi.h arabic.h if_mzsch.h mzscheme_base.c
2959objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \
2960 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2961 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2962 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002963objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002964 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2965 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2966 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002967objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002968 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2969 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2970 globals.h farsi.h arabic.h
Bram Moolenaard5cdbeb2005-10-10 20:59:28 +00002971objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002972 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2973 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2974 arabic.h
Bram Moolenaar202795b2005-10-11 20:29:39 +00002975objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002976 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2977 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2978 arabic.h version.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002979objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002980 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2981 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2982 globals.h farsi.h arabic.h os_unixx.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002983objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002984 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2985 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2986 globals.h farsi.h arabic.h
Bram Moolenaar202795b2005-10-11 20:29:39 +00002987objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002988 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \
2989 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \
2990 proto.h globals.h farsi.h arabic.h version.h workshop.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002991objects/wsdebug.o: wsdebug.c
2992objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002993 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2994 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2995 globals.h farsi.h arabic.h integration.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002996objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \
Bram Moolenaarb26e6322010-05-22 21:34:09 +02002997 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2998 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2999 globals.h farsi.h arabic.h version.h