blob: 0340f796bd6f266a24ce6ad842d2252e8fee8a7b [file] [log] [blame]
Bram Moolenaare1d12892004-06-13 13:02:36 +00001# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78
2#
3# This Makefile is loosely based on the GNU Makefile conventions found in
4# standards.info.
5#
6# Compiling Vim, summary:
7#
8# 3. make
9# 5. make install
10#
11# Compiling Vim, details:
12#
13# Edit this file for adjusting to your system. You should not need to edit any
14# other file for machine specific things!
15# The name of this file MUST be Makefile (note the uppercase 'M').
16#
17# 1. Edit this Makefile {{{1
18# The defaults for Vim should work on most machines, but you may want to
19# uncomment some lines or make other changes below to tune it to your
20# system, compiler or preferences. Uncommenting means that the '#' in
21# the first column of a line is removed.
22# - If you want a version of Vim that is small and starts up quickly,
23# you might want to disable the GUI, X11, Perl, Python and Tcl.
24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or
25# Athena but don't want to make gvim (the GUI version of Vim with nice
26# menus and scrollbars, but makes Vim bigger and startup slower).
27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a
28# Unix version.
29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
30# want to disable using X11 libraries. This speeds up starting Vim,
31# but the window title will not be set and the X11 selection can not
32# used.
33# - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the
34# X11 Session Management Protocol (XSMP) library (libSM) but do not
35# want to use it.
36# This can speedup Vim startup but Vim loses the ability to catch the
37# user logging out from session-managers like GNOME & KDE and work
38# could be lost.
39# - Uncomment one or more of these lines to include an interface;
40# each makes Vim quite a bit bigger:
41# --enable-perlinterp for Perl interpreter
42# --enable-pythoninterp for Python interpreter
43# --enable-rubyinterp for Ruby interpreter
44# --enable-tclinterp for Tcl interpreter
45# --enable-cscope for Cscope interface
46# - Uncomment one of the lines with --with-features= to enable a set of
47# features (but not the interfaces just mentioned).
48# - Uncomment the line with --disable-acl to disable ACL support even
49# though your system supports it.
50# - Uncomment the line with --disable-gpm to disable gpm support
51# even though you have gpm libraries and includes
52# - Uncomment one of the lines with CFLAGS and/or CC if you have
53# something very special or want to tune the optimizer.
54# - Search for the name of your system to see if it needs anything
55# special.
56# - A few versions of make use '.include "file"' instead of 'include
57# file'. Adjust the include line below if yours does.
58#
59# 2. Edit feature.h {{{1
60# Only if you do not agree with the default compile features, e.g.:
61# - you want Vim to be as vi compatible as it can be
62# - you want to use Emacs tags files
63# - you want right-to-left editing (Hebrew)
64# - you want 'langmap' support (Greek)
65# - you want to remove features to make Vim smaller
66#
67# 3. "make" {{{1
68# Will first run ./configure with the options in this file. Then it will
69# start make again on this Makefile to do the compiling. You can also do
70# this in two steps with:
71# make config
72# make
73# The configuration phase creates/overwrites auto/config.h and
74# auto/config.mk.
75# The configure script is created with "make autoconf". It can detect
76# different features of your system and act accordingly. However, it is
77# not correct for all systems. Check this:
78# - If you have X windows, but configure could not find it or reported
79# another include/library directory then you wanted to use, you have
80# to set CONF_OPT_X below. You might also check the installation of
81# xmkmf.
82# - If you have --enable-gui=motif and have Motif on your system, but
83# configure reports "checking for location of gui... <not found>", you
84# have to set GUI_INC_LOC and GUI_LIB_LOC below.
85# If you changed something, do this to run configure again:
86# make reconfig
87#
88# - If you do not trust the automatic configuration code, then inspect
89# auto/config.h and auto/config.mk, before starting the actual build
90# phase. If possible edit this Makefile, rather than auto/config.mk --
91# especially look at the definition of VIMLOC below. Note that the
92# configure phase overwrites auto/config.mk and auto/config.h again.
93# - If you get error messages, find out what is wrong and try to correct
94# it in this Makefile. You may need to do "make reconfig" when you
95# change anything that configure uses (e.g. switching from an old C
96# compiler to an ANSI C compiler). Only when auto/configure does
97# something wrong you may need to change one of the other files. If
98# you find a clean way to fix the problem, consider sending a note to
99# the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim
100# (Bram@vim.org). Don't bother to do that when you made a hack
101# solution for a non-standard system.
102#
103# 4. "make test" {{{1
104# This is optional. This will run Vim scripts on a number of test
105# files, and compare the produced output with the expected output.
106# If all is well, you will get the "ALL DONE" message in the end. See
107# below (search for "/^test").
108#
109# 5. "make install" {{{1
110# If the new Vim seems to be working OK you can install it and the
111# documentation in the appropriate location. The default is
112# "/usr/local". Change "prefix" below to change the location.
113# "auto/pathdef.c" will be compiled again after changing this to make
114# the executable know where the help files are located.
115# Note that any existing executable is removed or overwritten. If you
116# want to keep it you will have to make a backup copy first.
117# The runtime files are in a different directory for each version. You
118# might want to delete an older version.
119# If you don't want to install everything, there are other targets:
120# make installvim only installs Vim, not the tools
121# make installvimbin only installs the Vim executable
Bram Moolenaare344bea2005-09-01 20:46:49 +0000122# make installruntime installs most of the runtime files
123# make installrtbase only installs the Vim help and
Bram Moolenaare1d12892004-06-13 13:02:36 +0000124# runtime files
125# make installlinks only installs the Vim binary links
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +0000126# make installmanlinks only installs the Vim manpage links
Bram Moolenaare1d12892004-06-13 13:02:36 +0000127# make installmacros only installs the Vim macros
Bram Moolenaare344bea2005-09-01 20:46:49 +0000128# make installtutorbin only installs the Vim tutor program
129# make installtutor only installs the Vim tutor files
Bram Moolenaar217ad922005-03-20 22:37:15 +0000130# make installspell only installs the spell files
Bram Moolenaare1d12892004-06-13 13:02:36 +0000131# make installtools only installs xxd
132# If you install Vim, not to install for real but to prepare a package
133# or RPM, set DESTDIR to the root of the tree.
134#
135# 6. Use Vim until a new version comes out. {{{1
136#
137# 7. "make uninstall_runtime" {{{1
138# Will remove the runtime files for the current version. This is safe
139# to use while another version is being used, only version-specific
140# files will be deleted.
141# To remove the runtime files of another version:
142# make uninstall_runtime VIMRTDIR=/vim54
143# If you want to delete all installed files, use:
144# make uninstall
145# Note that this will delete files that have the same name for any
146# version, thus you might need to do a "make install" soon after this.
147# Be careful not to remove a version of Vim that is still being used!
148# To find out which files and directories will be deleted, use:
149# make -n uninstall
150# }}}
151#
152### This Makefile has been succesfully tested on many systems. {{{
153### Only the ones that require special options are mentioned here.
154### Check the (*) column for remarks, listed below.
155### Later code changes may cause small problems, otherwise Vim is supposed to
156### compile and run without problems.
157
158#system: configurations: version (*) tested by:
159#------------- ------------------------ ------- - ----------
160#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash
161#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn
162#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker
163#AIX 4.2.1 cc 5.2k (C) Will Fiveash
164#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor
165#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski
166#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert
167#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus
168#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus
169#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard
170#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein
171#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive
172#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar
173#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao
174#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor
175#Irix 6.4 cc ? 5.0m (S) Rick Sayre
176#Irix 6.5 cc ? 6.0 (S) David Harrison
177#Irix 64 bit 4.5 (K) Jon Wright
178#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman
179#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert
180#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
181#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
182#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz
183#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert
184#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers
185#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick
186#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum
187#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro
188#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter
189#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
190#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
191#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer
192#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman
193#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber
194#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon
195#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large
196#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann
197#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo
198#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden
199#Solaris with -lthread 5.5 (W) K. Nagano
200#Solaris gcc (b) Riccardo
201#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar
202#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert
203#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz
204#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro
205#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst
206#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar
207# }}}
208
209# (*) Remarks: {{{
210#
211# (1) Uncomment line below for shlicc2
212# (2) HPUX with compile problems or wrong digraphs, uncomment line below
213# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.
214# And add "-lXpm" to MOTIF_LIBS2.
215# (4) For cc the optimizer must be disabled (use CFLAGS= after running
216# configure) (symptom: ":set termcap" output looks weird).
217# (5) Compiler may need extra argument, see below.
218# (6) See below for a few lines to uncomment
219# (7) See below for lines which enable the use of clcc
220# (8) Needs some EXTRA_LIBS, search for Unisys below
221# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below.
222# (A) May need EXTRA_LIBS, see below
223# (B) Can't compile GUI because there is no waitpid()... Disable GUI below.
224# (C) Force the use of curses instead of termcap, see below.
225# (D) Uncomment lines below for QNX
226# (E) You might want to use termlib instead of termcap, see below.
227# (F) See below for instructions.
228# (G) Using ncursus version 4.2 has reported to cause a crash. Use the
229# Sun cursus library instead.
230# (H) See line for EXTRA_LIBS below.
231# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix.
232# (J) If you get undefined symbols, see below for a solution.
233# (K) See lines to uncomment below for machines with 64 bit pointers.
234# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk
235# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two
236# characters instead of one).
237# (N) SCO with decmouse.
238# (O) LynxOS needs EXTRA_LIBS, see below.
239# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.
240# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.
241# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.
242# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below.
243# (T) See ../doc/os_beos.txt.
244# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python
245# detection, since the configure script runs into an error when it
246# detects Python (probably because of the bash shell).
247# (V) See lines to uncomment below.
248# (X) Need to use the .include "auto/config.mk" line below
249# (Y) See line with c89 below
250# (Z) See lines with cc or c89 below
251# (a) See line with EXTRA_LIBS below.
252# (b) When using gcc with the Solaris linker, make sure you don't use GNU
253# strip, otherwise the binary may not run: "Cannot find ELF".
254# (x) When you get warnings for precompiled header files, run
255# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below.
256# }}}
257
258
259#DO NOT CHANGE the next line, we need it for configure to find the compiler
260#instead of using the default from the "make" program.
261#Use a line further down to change the value for CC.
262CC=
263
264# Change and use these defines if configure cannot find your Motif stuff.
265# Unfortunately there is no "standard" location for Motif. {{{
266# These defines can contain a single directory (recommended) or a list of
267# directories (for when you are working with several systems). The LAST
268# directory that exists is used.
269# When changed, run "make reconfig" next!
270#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2
271#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2
272### Use these two lines for Infomagic Motif (3)
273#GUI_INC_LOC = -I/usr/X11R6/include
274#GUI_LIB_LOC = -L/usr/X11R6/lib
275# }}}
276
277######################## auto/config.mk ######################## {{{1
278# At this position auto/config.mk is included. When starting from the
279# distribution it is almost empty. After running auto/configure it contains
280# settings that have been discovered for your system. Settings below this
281# include override settings in auto/config.mk!
282
283# Note: if auto/config.mk is lost somehow (e.g., because configure was
284# interrupted), create an empty auto/config.mk file and do "make config".
285
286# (X) How to include auto/config.mk depends on the version of "make" you have,
287# if the current choice doesn't work, try the other one.
288
289include auto/config.mk
290#.include "auto/config.mk"
291CClink = $(CC)
292
293#}}}
294
295# Include the configuration choices first, so we can override everything
296# below. As shipped, this file contains a target that causes to run
297# configure. Once configure was run, this file contains a list of
298# make variables with predefined values instead. Thus any second invocation
299# of make, will buid Vim.
300
301# CONFIGURE - configure arguments {{{1
302# You can give a lot of options to configure.
303# Change this to your desire and do 'make config' afterwards
304
305# examples (can only use one!):
306#CONF_ARGS = --exec-prefix=/usr
307#CONF_ARGS = --with-vim-name=vim6 --with-ex-name=ex6 --with-view-name=view6
308#CONF_ARGS = --with-global-runtime=/etc/vim
309
310# Use this one if you distribute a modified version of Vim.
311#CONF_ARGS = --with-modified-by="John Doe"
312
313# GUI - For creating Vim with GUI (gvim) (B)
314# Uncomment this line when you don't want to get the GUI version, although you
315# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11
316# at all.
317#CONF_OPT_GUI = --disable-gui
318
319# Uncomment one of these lines if you have that GUI but don't want to use it.
320# The automatic check will use another one that can be found
321# Gnome is disabled by default, it may cause trouble.
322#CONF_OPT_GUI = --disable-gtk-check
323#CONF_OPT_GUI = --disable-gtk2-check
324#CONF_OPT_GUI = --enable-gnome-check
325#CONF_OPT_GUI = --enable-gnome2-check
326#CONF_OPT_GUI = --disable-motif-check
327#CONF_OPT_GUI = --disable-athena-check
328#CONF_OPT_GUI = --disable-nextaw-check
329
330# Uncomment one of these lines to select a specific GUI to use.
331# When using "yes" or nothing, configure will use the first one found: GTK+,
332# Motif or Athena.
333#
334# GTK versions that are known not to work 100% are rejected.
335# Use "--disable-gtktest" to accept them anyway.
336#
337# GNOME means GTK with Gnome support. If using GTK, then GNOME will
338# automatically be used if it is found. If you have GNOME, but do not want to
339# use it (e.g., want a GTK-only version), then use --enable-gui=gtk.
340#
Bram Moolenaar81695252004-12-29 20:58:21 +0000341# KDE doesn't fully work, unfortunately. See the todo list.
342#
Bram Moolenaare1d12892004-06-13 13:02:36 +0000343# If the selected GUI isn't found, the GUI is disabled automatically
344#CONF_OPT_GUI = --enable-gui=gtk
345#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
346#CONF_OPT_GUI = --enable-gui=gtk2
347#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest
348#CONF_OPT_GUI = --enable-gui=gnome
349#CONF_OPT_GUI = --enable-gui=gnome2
350#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest
Bram Moolenaarcfbc5ee2004-07-02 15:38:35 +0000351#CONF_OPT_GUI = --enable-gui=kde
Bram Moolenaare1d12892004-06-13 13:02:36 +0000352#CONF_OPT_GUI = --enable-gui=motif
353#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"
354#CONF_OPT_GUI = --enable-gui=athena
355#CONF_OPT_GUI = --enable-gui=nextaw
356
357# DARWIN - detecting Mac OS X
358# Uncomment this line when you want to compile a Unix version of Vim on
359# Darwin. None of the Mac specific options or files will be used.
360#CONF_OPT_DARWIN = --disable-darwin
361
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000362# PERL
Bram Moolenaare1d12892004-06-13 13:02:36 +0000363# Uncomment this when you want to include the Perl interface.
364# The Perl option sometimes causes problems, because it adds extra flags
365# to the command line. If you see strange flags during compilation, check in
366# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting
367# the next line.
368# When you get an error for a missing "perl.exp" file, try creating an emtpy
369# one: "touch perl.exp".
370# This requires at least "small" features, "tiny" doesn't work.
371#CONF_OPT_PERL = --enable-perlinterp
372
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000373# PYTHON
Bram Moolenaare1d12892004-06-13 13:02:36 +0000374# Uncomment this when you want to include the Python interface.
Bram Moolenaar0e21a3f2005-04-17 20:28:32 +0000375# NOTE: This may cause threading to be enabled, which has side effects (such
376# as using different libraries and debugging becomes more difficult).
Bram Moolenaare1d12892004-06-13 13:02:36 +0000377#CONF_OPT_PYTHON = --enable-pythoninterp
378
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000379# TCL
Bram Moolenaare1d12892004-06-13 13:02:36 +0000380# Uncomment this when you want to include the Tcl interface.
381#CONF_OPT_TCL = --enable-tclinterp
382
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000383# RUBY
Bram Moolenaare1d12892004-06-13 13:02:36 +0000384# Uncomment this when you want to include the Ruby interface.
385#CONF_OPT_RUBY = --enable-rubyinterp
386
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000387# MZSCHEME
388# Uncomment this when you want to include the MzScheme interface.
389#CONF_OPT_MZSCHEME = --enable-mzschemeinterp
390# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works
391#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt
392#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme
393#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz
394
395# CSCOPE
Bram Moolenaare1d12892004-06-13 13:02:36 +0000396# Uncomment this when you want to include the Cscope interface.
397#CONF_OPT_CSCOPE = --enable-cscope
398
399# WORKSHOP - Sun Visual Workshop interface. Only works with Motif!
400#CONF_OPT_WORKSHOP = --enable-workshop
401
402# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.
403# Motif version must have XPM libraries (see |workshop-xpm|).
404# Uncomment this when you do not want the netbeans interface.
405#CONF_OPT_NETBEANS = --disable-netbeans
406
407# SNIFF - Include support for SNiFF+.
408#CONF_OPT_SNIFF = --enable-sniff
409
410# MULTIBYTE - To edit multi-byte characters.
411# Uncomment this when you want to edit a multibyte language.
412# It's automatically enabled with big features or IME support.
413# Note: Compile on a machine where setlocale() actually works, otherwise the
414# configure tests may fail.
415#CONF_OPT_MULTIBYTE = --enable-multibyte
416
417# NLS - National Language Support
418# Uncomment this when you do not want to support translated messages, even
419# though configure can find support for it.
420#CONF_OPT_NLS = --disable-nls
421
422# XIM - X Input Method. Special character input support for X11 (chinese,
423# japanese, special symbols, etc). Also needed for dead-key support.
424# When omitted it's automatically enabled for the X-windows GUI.
425# HANGUL - Input Hangul (korean) language using internal routines.
426# Uncomment one of these when you want to input a multibyte language.
427#CONF_OPT_INPUT = --enable-xim
428#CONF_OPT_INPUT = --disable-xim
429#CONF_OPT_INPUT = --enable-hangulinput
430
431# FONTSET - X fontset support for output of languages with many characters.
432# Uncomment this when you want to output a multibyte language.
433#CONF_OPT_OUTPUT = --enable-fontset
434
435# ACL - Uncomment this when you do not want to include ACL support, even
436# though your system does support it. E.g., when it's buggy.
437#CONF_OPT_ACL = --disable-acl
438
439# gpm - For mouse support on Linux console via gpm
440# Uncomment this when you do not want to include gpm support, even
441# though you have gpm libraries and includes
442#CONF_OPT_GPM = --disable-gpm
443
444# FEATURES - For creating Vim with more or less features
445# Uncomment one of these lines when you want to include few to many features.
446# The default is "normal".
447#CONF_OPT_FEAT = --with-features=tiny
448#CONF_OPT_FEAT = --with-features=small
449#CONF_OPT_FEAT = --with-features=normal
450#CONF_OPT_FEAT = --with-features=big
Bram Moolenaar69a7cb42004-06-20 12:51:53 +0000451#CONF_OPT_FEAT = --with-features=huge
Bram Moolenaare1d12892004-06-13 13:02:36 +0000452
453# COMPILED BY - For including a specific e-mail address for ":version".
454#CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"
455
456# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies
457# (otherwise Vim configure will try to include xterm titlebar access)
458# Also disable the GUI above, otherwise it will be included anyway.
459# When both GUI and X11 have been disabled this may save about 15% of the
460# code and make Vim startup quicker.
461#CONF_OPT_X = --without-x
462
463# X WINDOWS DIRECTORY - specify X directories
464# If configure can't find you X stuff, or if you have multiple X11 derivates
465# installed, you may wish to specify which one to use.
466# Select nothing to let configure choose.
467# This here selects openwin (as found on sun).
468#XROOT = /usr/openwin
469#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib
470
471# X11 Session Management Protocol support
472# Vim will try to use XSMP to catch the user logging out if there are unsaved
473# files. Uncomment this line to disable that (it prevents vim trying to open
474# communications with the session manager).
475#CONF_OPT_XSMP = --disable-xsmp
476
477# You may wish to include xsmp but use exclude xsmp-interact if the logout
478# XSMP functionality does not work well with your session-manager (at time of
479# writing, this would be early GNOME-1 gnome-session: it 'freezes' other
480# applications after Vim has cancelled a logout (until Vim quits). This
481# *might* be the Vim code, but is more likely a bug in early GNOME-1.
482# This disables the dialog that asks you if you want to save files or not.
483#CONF_OPT_XSMP = --disable-xsmp-interact
484
485# COMPILER - Name of the compiler {{{1
486# The default from configure will mostly be fine, no need to change this, just
487# an example. If a compiler is defined here, configure will use it rather than
488# probing for one. It is dangerous to change this after configure was run.
489# Make will use your choice then -- but beware: Many things may change with
490# another compiler. It is wise to run 'make reconfig' to start all over
491# again.
492#CC = cc
493#CC = gcc
494
495# COMPILER FLAGS - change as you please. Either before running {{{1
496# configure or afterwards. For examples see below.
497# When using -g with some older versions of Linux you might get a
498# statically linked executable.
499# When not defined, configure will try to use -O2 -g for gcc and -O for cc.
500#CFLAGS = -g
501#CFLAGS = -O
502
503# Optimization limits - depends on the compiler. Automatic check in configure
504# doesn't work very well, because many compilers only give a warning for
505# unrecognized arguments.
506#CFLAGS = -O -OPT:Olimit=2600
507#CFLAGS = -O -Olimit 2000
508#CFLAGS = -O -FOlimit,2000
509
510# Often used for GCC: mixed optimizing, lot of optimizing, debugging
511#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
Bram Moolenaar69a7cb42004-06-20 12:51:53 +0000512#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes
Bram Moolenaardf177f62005-02-22 08:39:57 +0000513#CFLAGS = -g -Wall -Wmissing-prototypes
Bram Moolenaare1d12892004-06-13 13:02:36 +0000514#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
515#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes
Bram Moolenaar592e0a22004-07-03 16:05:59 +0000516#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
Bram Moolenaare1d12892004-06-13 13:02:36 +0000517
518# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond
519# allocated memory (and makes every malloc()/free() very slow).
520# Electric Fence is free (search ftp sites).
Bram Moolenaar53180ce2005-07-05 21:48:14 +0000521# You may want to set the EF_PROTECT_BELOW environment variable to check the
522# other side of allocated memory.
Bram Moolenaare1d12892004-06-13 13:02:36 +0000523# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this
524# as root: sysctl -w vm.max_proc_mmap=30000
525#EXTRA_LIBS = /usr/local/lib/libefence.a
526
527# PURIFY - remove the # to use the "purify" program (hoi Nia++!)
528#PURIFY = purify
529# }}}
530
531# LINT - for running lint
532LINT_OPTIONS = -beprxzF
533
534# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.
535# Might not work with GUI or Perl.
536# Need to recompile everything after changing this: "make clean" "make".
537#PROFILE_CFLAGS = -pg -g
538#PROFILE_LIBS = -pg
539
Bram Moolenaar0a5fe212005-06-24 23:01:23 +0000540# MEMORY LEAK DETECTION
541# Requires installing the ccmalloc library.
542# Configuration is in the .ccmalloc file.
543# Doesn't work very well, since memory linked to from global variables
544# (indirectly) is also marked as leaked memory.
545#PROFILE_CFLAGS = -DEXITFREE
546#PROFILE_LIBS = -lccmalloc
547
Bram Moolenaare1d12892004-06-13 13:02:36 +0000548#####################################################
549### Specific systems, check if yours is listed! ### {{{
550#####################################################
551
552### Uncomment things here only if the values chosen by configure are wrong.
553### It's better to adjust configure.in and "make autoconf", if you can!
554### Then send the required changes to configure.in to the bugs list.
555
556### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries
557###
558#CC = shlicc2
559#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin
560
561### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler
562### The first probably works on all systems
563### The second should work a bit better on newer systems
564### The third should work a bit better on HPUX 11.11
565### Information provided by: Richard Allen <ra@rhi.hi.is>
566#CC = c89 -D_HPUX_SOURCE
567#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE
568#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE
569
570### (2) For HP-UX: Enable the use of a different set of digraphs. Use this
571### when the default (ISO) digraphs look completely wrong.
572### After changing this do "touch digraph.c; make".
573#EXTRA_DEFS = -DHPUX_DIGRAPHS
574
575### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes
576### is too small to compile many routines. It produces too much defining
577### and no space errors.
578### Uncomment the following to specify a larger macro definition table.
579#CFLAGS = -Wp,-H256000
580
581### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with
582### libraries in /usr/lib instead of /lib (avoiding transition links).
583### Information provided by: David Green
584#XROOT = /usr
585#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6
586#GUI_INC_LOC = -I/usr/include/Motif1.2
587#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6
588
589### (5) AIX 4.1.4 with cc
590#CFLAGS = -O -qmaxmem=8192
591
592### AIX with c89 (Walter Briscoe)
593#CC = c89
594#CPPFLAGS = -D_ALL_SOURCE
595
596### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)
597# needed to avoid a problem where strings.h gets included
598#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__
599
600### (W) Solaris with multi-threaded libraries (-lthread):
601### If suspending doesn't work properly, try using this line:
602#EXTRA_DEFS = -D_REENTRANT
603
604### (7) Solaris 2.4/2.5 with Centerline compiler
605#CC = clcc
606#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
607#CFLAGS = -O
608
609### (9) Solaris 2.x with cc (SunPro), using Athena.
610### Only required for compiling gui_at_sb.c.
611### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb"
612### Use one of the lines (either Full ANSI or no ANSI at all)
613#CFLAGS = $(CFLAGS) -Xc
614#CFLAGS = $(CFLAGS) -Xs
615
616### Solaris 2.3 with X11 and specific cc
617#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib
618
619### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")
620#CC = /usr/ucb/cc
621#EXTRA_LIBS = -R/usr/ucblib
622
623### Solaris with Forte Developer and FEAT_SUN_WORKSHOP
624# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.
625#CC = cc
626#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris
627#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm
628#XPM_IPATH = -I$(XPM_DIR)/include
629#EXTRA_LIBS = $(XPM_LIB)
630#EXTRA_IPATHS = $(XPM_IPATH)
631#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H
632
633### Solaris with workshop compilers: Vim is unstable when compiled with
634# "-fast". Use this instead. (Shea Martin)
635#CFLAGS = -x02 -xtarget=ultra
636
637### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:
638#LDFLAGS = -lw -ldl -lXmu
639#GUI_LIB_LOC = -L/usr/local/lib
640
641### (8) Unisys 6035 (Glauber Ribeiro)
642#EXTRA_LIBS = -lnsl -lsocket -lgen
643
644### When builtin functions cause problems with gcc (for Sun 4.1.x)
645#CFLAGS = -O2 -Wall -traditional -Wno-implicit
646
647### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
648#EXTRA_DEFS = -DDOMAIN
649#CFLAGS= -O -A systype,bsd4.3
650
651### Coherent 4.2.10 on Intel 386 platform
652#EXTRA_DEFS = -Dvoid=int
653#EXTRA_LIBS = -lterm -lsocket
654
655### SCO 3.2, with different library name for terminfo
656#EXTRA_LIBS = -ltinfo
657
658### UTS2 for Amdahl UTS 2.1.x
659#EXTRA_DEFS = -DUTS2
660#EXTRA_LIBS = -lsocket
661
662### UTS4 for Amdahl UTS 4.x
663#EXTRA_DEFS = -DUTS4 -Xa
664
665### USL for Unix Systems Laboratories (SYSV 4.2)
666#EXTRA_DEFS = -DUSL
667
668### RISCos on MIPS without X11
669#EXTRA_DEFS = -DMIPS
670
671### RISCos on MIPS with X11
672#EXTRA_LIBS = -lsun
673
674### (6) A/UX 3.1.1 with gcc (Jim Jagielski)
675#CC= gcc -D_POSIX_SOURCE
676#CFLAGS= -O2
677#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11
678
679### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)
680### Also use the CONF_TERM_LIB below!
681#EXTRA_LIBS = -lgen
682
683### (D) QNX (by G.F. Desrochers)
684#CFLAGS = -g -O -mf -4
685
686### (F) QNX (by John Oleynick)
687# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment
688# CONF_OPT_X = --without-x.
689# 2. make config
690# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't
691# have -ldir (does config find it somewhere?) and -ltermcap has at
692# least one problem so I use termlib.o instead. The problem with
693# termcap is that it segfaults if you call it with the name of
694# a non-existent terminal type.
695# 4. edit auto/config.h and add #define USE_TMPNAM
696# 5. add termlib.o to OBJ
697# 6. make
698
699### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)
700#EXTRA_LIBS = -lgen
701
702### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)
703#EXTRA_LIBS = -lgen -lnsl
704### For SINIX-Y this is needed for the right prototype of gettimeofday()
705#EXTRA_DEFS = -D_XPG_IV
706
707### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc
708# Use both "-F O3" lines for optimization or the "-g" line for debugging
709#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE
710#CFLAGS = -F O3 -DSINIXN
711#LDFLAGS = -F O3
712#CFLAGS = -g -DSINIXN
713
714### (P) SCO 3.2.42, with different termcap names for some useful keys DJB
715#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY
716#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s
717
718### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz)
719#GUI_INC_LOC = -I/usr/include
720#GUI_LIB_LOC = -L/usr/lib
721#EXTRA_LIBS = -lgen
722
723### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)
724#GUI_INC_LOC = -I/usr/necccs/include
725#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6
726#XROOT = /usr/necccs
727#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6
728#EXTRA_LIBS = -lsocket -lgen
729
730### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
731# Not needed for Irix 5.3, Ives Aerts reported
732#EXTRA_LIBS = -lmalloc -lc_s
733# Irix 4.0, when regexp and regcmp cannot be found when linking:
734#EXTRA_LIBS = -lmalloc -lc_s -lPW
735
736### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag:
737# Note: This newer option style is used with the MipsPro compilers ONLY if
738# you are compiling an "n32" or "64" ABI binary (use either a -n32
739# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag,
740# then the CFLAGS option format will be the typical style (i.e.
741# -Olimit 3000).
742#CFLAGS = -OPT:Olimit=3000 -O
743
744### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new
745# compiler features! Beware, the optimization is EXTREMELY thorough
746# and takes quite a long time.
747# Note: See the note above. Here, the -mips3 option automatically
748# enables either the "n32" or "64" ABI, depending on what machine you
749# are compiling on (n32 is explicitly enabled here, just to make sure).
750#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
751#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
752
753### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64)
754### Suggested by Jon Wright <jon@gate.sinica.edu.tw>.
755### Tested on R8000 IRIX6.1 Power Indigo2.
756### Check /etc/compiler.defaults for your compiler settings.
757# either (for 64 bit pointers) uncomment the following line
758#GUI_LIB_LOC = -L/usr/lib64
759# then
760# 1) make config
761# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line
762# 3) make
763#
764# or (for 32bit pointers) uncomment the following line
765#EXTRA_DEFS = -n32
766#GUI_LIB_LOC = -L/usr/lib32
767# then
768# 1) make config
769# 2) edit auto/config.mk, add -n32 to LDFLAGS
770# 3) make
771###
772
773### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library,
774### which is found by configure, doesn't work correctly. Symptom is the
775### error message "Termcap entry too long". Uncomment the next line.
776### On AIX 4.2.1 (and other versions probably), libtermcap is reported
777### not to display properly.
778### after changing this, you need to do "make reconfig".
779#CONF_TERM_LIB = --with-tlib=curses
780
781### (E) If you want to use termlib library instead of the automatically found
782### one. After changing this, you need to do "make reconfig".
783#CONF_TERM_LIB = --with-tlib=termlib
784
785### (a) ESIX V4.2 (Reinhard Wobst)
786#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext
787
788### If you want to use ncurses library instead of the automatically found one
789### after changing this, you need to do "make reconfig".
790#CONF_TERM_LIB = --with-tlib=ncurses
791
792### For GCC on MSDOS, the ".exe" suffix will be added.
793#EXEEXT = .exe
794#LNKEXT = .exe
795
796### (O) For LynxOS 2.5.0, tested on PC.
797#EXTRA_LIBS = -lXext -lSM -lICE -lbsd
798### For LynxOS 3.0.1, tested on PPC
799#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11
800### For LynxOS 3.1.0, tested on PC
801#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu
802
803
804### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove
805### -Qtarget if only in a 5800 environment. (Kipp E. Howard)
806#CFLAGS = -O -Qtarget=m88110compat
807#EXTRA_LIBS = -lgen
808
809##################### end of system specific lines ################### }}}
810
811### Names of the programs and targets {{{1
812VIMTARGET = $(VIMNAME)$(EXEEXT)
813EXTARGET = $(EXNAME)$(LNKEXT)
814VIEWTARGET = $(VIEWNAME)$(LNKEXT)
815GVIMNAME = g$(VIMNAME)
816GVIMTARGET = $(GVIMNAME)$(LNKEXT)
817GVIEWNAME = g$(VIEWNAME)
818GVIEWTARGET = $(GVIEWNAME)$(LNKEXT)
819RVIMNAME = r$(VIMNAME)
820RVIMTARGET = $(RVIMNAME)$(LNKEXT)
821RVIEWNAME = r$(VIEWNAME)
822RVIEWTARGET = $(RVIEWNAME)$(LNKEXT)
823RGVIMNAME = r$(GVIMNAME)
824RGVIMTARGET = $(RGVIMNAME)$(LNKEXT)
825RGVIEWNAME = r$(GVIEWNAME)
826RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT)
827VIMDIFFNAME = $(VIMNAME)diff
828GVIMDIFFNAME = g$(VIMDIFFNAME)
829VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT)
830GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT)
831EVIMNAME = e$(VIMNAME)
832EVIMTARGET = $(EVIMNAME)$(LNKEXT)
833EVIEWNAME = e$(VIEWNAME)
834EVIEWTARGET = $(EVIEWNAME)$(LNKEXT)
835
836### Names of the tools that are also made {{{1
837TOOLS = xxd/xxd$(EXEEXT)
838
839### Installation directories. The defaults come from configure. {{{1
840#
841### prefix the top directory for the data (default "/usr/local")
842#
843# Uncomment the next line to install Vim in your home directory.
844#prefix = $(HOME)
845
846### exec_prefix is the top directory for the executable (default $(prefix))
847#
848# Uncomment the next line to install the Vim executable in "/usr/machine/bin"
849#exec_prefix = /usr/machine
850
851### BINDIR dir for the executable (default "$(exec_prefix)/bin")
852### MANDIR dir for the manual pages (default "$(prefix)/man")
853### DATADIR dir for the other files (default "$(prefix)/lib" or
854# "$(prefix)/share")
855# They may be different when using different architectures for the
856# executable and a common directory for the other files.
857#
858# Uncomment the next line to install Vim in "/usr/bin"
859#BINDIR = /usr/bin
860# Uncomment the next line to install Vim manuals in "/usr/share/man/man1"
861#MANDIR = /usr/share/man
862# Uncomment the next line to install Vim help files in "/usr/share/vim"
863#DATADIR = /usr/share
864
865### DESTDIR root of the installation tree. This is prepended to the other
866# directories. This directory must exist.
867#DESTDIR = ~/pkg/vim
868
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +0000869### Directory of the man pages
870MAN1DIR = /man1
Bram Moolenaare1d12892004-06-13 13:02:36 +0000871
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +0000872### Vim version (adjusted by a script)
873VIMMAJOR = 7
874VIMMINOR = 0aa
875
Bram Moolenaare1d12892004-06-13 13:02:36 +0000876### Location of Vim files (should not need to be changed, and {{{1
877### some things might not work when they are changed!)
878VIMDIR = /vim
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +0000879VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +0000880HELPSUBDIR = /doc
881COLSUBDIR = /colors
882SYNSUBDIR = /syntax
883INDSUBDIR = /indent
Bram Moolenaar87e25fd2005-07-27 21:13:01 +0000884AUTOSUBDIR = /autoload
Bram Moolenaare1d12892004-06-13 13:02:36 +0000885PLUGSUBDIR = /plugin
886FTPLUGSUBDIR = /ftplugin
887LANGSUBDIR = /lang
888COMPSUBDIR = /compiler
889KMAPSUBDIR = /keymap
890MACROSUBDIR = /macros
891TOOLSSUBDIR = /tools
892TUTORSUBDIR = /tutor
Bram Moolenaar217ad922005-03-20 22:37:15 +0000893SPELLSUBDIR = /spell
Bram Moolenaare1d12892004-06-13 13:02:36 +0000894PRINTSUBDIR = /print
895PODIR = po
896
897### VIMLOC common root of the Vim files (all versions)
898### VIMRTLOC common root of the runtime Vim files (this version)
899### VIMRCLOC compiled-in location for global [g]vimrc files (all versions)
900### VIMRUNTIMEDIR compiled-in location for runtime files (optional)
901### HELPSUBLOC location for help files
902### COLSUBLOC location for colorscheme files
903### SYNSUBLOC location for syntax files
904### INDSUBLOC location for indent files
Bram Moolenaar87e25fd2005-07-27 21:13:01 +0000905### AUTOSUBLOC location for standard autoload files
Bram Moolenaare1d12892004-06-13 13:02:36 +0000906### PLUGSUBLOC location for standard plugin files
907### FTPLUGSUBLOC location for ftplugin files
908### LANGSUBLOC location for language files
909### COMPSUBLOC location for compiler files
910### KMAPSUBLOC location for keymap files
911### MACROSUBLOC location for macro files
912### TOOLSSUBLOC location for tools files
913### TUTORSUBLOC location for tutor files
Bram Moolenaar217ad922005-03-20 22:37:15 +0000914### SPELLSUBLOC location for spell files
Bram Moolenaare1d12892004-06-13 13:02:36 +0000915### PRINTSUBLOC location for PostScript files (prolog, latin1, ..)
916### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..)
917### You can override these if you want to install them somewhere else.
918### Edit feature.h for compile-time settings.
919VIMLOC = $(DATADIR)$(VIMDIR)
920VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR)
921VIMRCLOC = $(VIMLOC)
922HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR)
923COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR)
924SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR)
925INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR)
Bram Moolenaar87e25fd2005-07-27 21:13:01 +0000926AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +0000927PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR)
928FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR)
929LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR)
930COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR)
931KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR)
932MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR)
933TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR)
934TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR)
Bram Moolenaar217ad922005-03-20 22:37:15 +0000935SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +0000936PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR)
937SCRIPTLOC = $(VIMRTLOC)
938
939### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and
940### the runtime directory is not below it.
941#VIMRUNTIMEDIR = $(VIMRTLOC)
942
943### Name of the evim file target.
944EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim
945MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim
946
947### Name of the menu file target.
948SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim
949SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim
950SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim
951
952### Name of the bugreport file target.
953SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim
954
955### Name of the file type detection file target.
956SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim
957
958### Name of the file type detection file target.
959SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim
960
961### Name of the file type detection script file target.
962SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim
963
964### Name of the ftplugin-on file target.
965SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim
966
967### Name of the ftplugin-off file target.
968SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim
969
970### Name of the indent-on file target.
971SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim
972
973### Name of the indent-off file target.
974SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim
975
976### Name of the option window script file target.
977SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim
978
979# Program to install the program in the target directory. Could also be "mv".
980INSTALL_PROG = cp
981
982# Program to install the data in the target directory. Cannot be "mv"!
983INSTALL_DATA = cp
984INSTALL_DATA_R = cp -r
985
986### Program to run on installed binary
987#STRIP = strip
988
989### Permissions for binaries {{{1
990BINMOD = 755
991
992### Permissions for man page
993MANMOD = 644
994
995### Permissions for help files
996HELPMOD = 644
997
998### Permissions for Perl and shell scripts
999SCRIPTMOD = 755
1000
1001### Permission for Vim script files (menu.vim, bugreport.vim, ..)
1002VIMSCRIPTMOD = 644
1003
1004### Permissions for all directories that are created
1005DIRMOD = 755
1006
1007### Permissions for all other files that are created
1008FILEMOD = 644
1009
1010# Where to copy the man and help files from
1011HELPSOURCE = ../runtime/doc
1012
1013# Where to copy the script files from (menu, bugreport)
1014SCRIPTSOURCE = ../runtime
1015
1016# Where to copy the colorscheme files from
1017COLSOURCE = ../runtime/colors
1018
1019# Where to copy the syntax files from
1020SYNSOURCE = ../runtime/syntax
1021
1022# Where to copy the indent files from
1023INDSOURCE = ../runtime/indent
1024
1025# Where to copy the standard plugin files from
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00001026AUTOSOURCE = ../runtime/autoload
1027
1028# Where to copy the standard plugin files from
Bram Moolenaare1d12892004-06-13 13:02:36 +00001029PLUGSOURCE = ../runtime/plugin
1030
1031# Where to copy the ftplugin files from
1032FTPLUGSOURCE = ../runtime/ftplugin
1033
1034# Where to copy the macro files from
1035MACROSOURCE = ../runtime/macros
1036
1037# Where to copy the tools files from
1038TOOLSSOURCE = ../runtime/tools
1039
1040# Where to copy the tutor files from
1041TUTORSOURCE = ../runtime/tutor
1042
Bram Moolenaar217ad922005-03-20 22:37:15 +00001043# Where to copy the spell files from
1044SPELLSOURCE = ../runtime/spell
1045
Bram Moolenaare1d12892004-06-13 13:02:36 +00001046# Where to look for language specific files
1047LANGSOURCE = ../runtime/lang
1048
1049# Where to look for compiler files
1050COMPSOURCE = ../runtime/compiler
1051
1052# Where to look for keymap files
1053KMAPSOURCE = ../runtime/keymap
1054
1055# Where to look for print resource files
1056PRINTSOURCE = ../runtime/print
1057
1058# If you are using Linux, you might want to use this to make vim the
1059# default vi editor, it will create a link from vi to Vim when doing
1060# "make install". An existing file will be overwritten!
1061# When not using it, some make programs can't handle an undefined $(LINKIT).
1062#LINKIT = -ln -f -s $(BINDIR)/$(VIMTARGET) /usr/bin/vi
1063LINKIT = @echo >/dev/null
1064
1065###
1066### GRAPHICAL USER INTERFACE (GUI). {{{1
1067### 'configure --enable-gui' can enable one of these for you if you did set
1068### a corresponding CONF_OPT_GUI above and have X11.
1069### Override configures choice by uncommenting all the following lines.
1070### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF"
1071### for enabling the Athena or Motif GUI.
1072#GUI_SRC = $(NONE_SRC)
1073#GUI_OBJ = $(NONE_OBJ)
1074#GUI_DEFS = $(NONE_DEFS)
1075#GUI_IPATH = $(NONE_IPATH)
1076#GUI_LIBS_DIR = $(NONE_LIBS_DIR)
1077#GUI_LIBS1 = $(NONE_LIBS1)
1078#GUI_LIBS2 = $(NONE_LIBS2)
1079#GUI_INSTALL = $(NONE_INSTALL)
1080#GUI_TARGETS = $(NONE_TARGETS)
1081#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS)
1082#GUI_TESTTARGET = $(NONE_TESTTARGET)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001083#GUI_BUNDLE = $(NONE_BUNDLE)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001084
1085# Without a GUI install the normal way.
1086NONE_INSTALL = install_normal
1087
Bram Moolenaar843ee412004-06-30 16:16:41 +00001088### KDE GUI interface.
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00001089KDE_SRC = gui.c pty.c gui_kde.cc gui_kde_x11.cc gui_kde_wid.cc gui_kde_wid_moc.cc kvim_iface_skel.cc
Bram Moolenaar843ee412004-06-30 16:16:41 +00001090KDE_OBJ = objects/gui.o objects/pty.o objects/gui_kde.o objects/gui_kde_x11.o \
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00001091 objects/gui_kde_wid.o objects/gui_kde_wid_moc.o \
Bram Moolenaar843ee412004-06-30 16:16:41 +00001092 objects/kvim_iface_skel.o
1093KDE_DEFS = -DFEAT_GUI_KDE $(NARROW_PROTO)
1094KDE_IPATH = $(GUI_INC_LOC)
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001095KDE_LIBS_DIR = $(GUI_LIB_LOC) # Includes the libraries themselves
1096KDE_DIR = $(KDE_PREFIX)
Bram Moolenaar843ee412004-06-30 16:16:41 +00001097KDE_LIBS1 =
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001098KDE_LIBS2 =
Bram Moolenaar843ee412004-06-30 16:16:41 +00001099KDE_INSTALL = install_normal
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001100KDE_TARGETS = installglinks installkdeicons
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001101KDE_MAN_TARGETS = yes
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001102KDE_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001103KDE_BUNDLE =
Bram Moolenaar843ee412004-06-30 16:16:41 +00001104
Bram Moolenaare1d12892004-06-13 13:02:36 +00001105### GTK GUI
1106GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \
1107 gui_beval.c
1108GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \
1109 objects/pty.o objects/gui_gtk_f.o \
1110 objects/gui_beval.o
1111GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO)
1112GTK_IPATH = $(GUI_INC_LOC)
1113GTK_LIBS_DIR = $(GUI_LIB_LOC)
1114GTK_LIBS1 =
1115GTK_LIBS2 = $(GTK_LIBNAME)
1116GTK_INSTALL = install_normal
1117GTK_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001118GTK_MAN_TARGETS = yes
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001119GTK_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001120GTK_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001121
1122### Motif GUI
Bram Moolenaardfccaf02004-12-31 20:56:11 +00001123MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00001124 gui_xmdlg.c gui_xmebw.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00001125MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \
Bram Moolenaardfccaf02004-12-31 20:56:11 +00001126 objects/pty.o objects/gui_beval.o \
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00001127 objects/gui_xmdlg.o objects/gui_xmebw.o
Bram Moolenaare1d12892004-06-13 13:02:36 +00001128MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO)
1129MOTIF_IPATH = $(GUI_INC_LOC)
1130MOTIF_LIBS_DIR = $(GUI_LIB_LOC)
1131MOTIF_LIBS1 =
1132MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt
1133MOTIF_INSTALL = install_normal
1134MOTIF_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001135MOTIF_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001136MOTIF_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001137MOTIF_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001138
1139### Athena GUI
1140### Use Xaw3d to make the menus look a little bit nicer
1141#XAW_LIB = -lXaw3d
1142XAW_LIB = -lXaw
1143
1144### When using Xaw3d, uncomment/comment the following lines to also get the
1145### scrollbars from Xaw3d.
1146#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1147#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1148# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1149#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \
1150# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \
1151# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb
1152ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \
1153 gui_at_sb.c gui_at_fs.c
1154ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1155 objects/pty.o objects/gui_beval.o \
1156 objects/gui_at_sb.o objects/gui_at_fs.o
1157ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO)
1158
1159ATHENA_IPATH = $(GUI_INC_LOC)
1160ATHENA_LIBS_DIR = $(GUI_LIB_LOC)
1161ATHENA_LIBS1 = $(XAW_LIB)
1162ATHENA_LIBS2 = -lXt
1163ATHENA_INSTALL = install_normal
1164ATHENA_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001165ATHENA_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001166ATHENA_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001167ATHENA_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001168
1169### neXtaw GUI
1170NEXTAW_LIB = -lneXtaw
1171
1172NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1173NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1174 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1175NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO)
1176
1177NEXTAW_IPATH = $(GUI_INC_LOC)
1178NEXTAW_LIBS_DIR = $(GUI_LIB_LOC)
1179NEXTAW_LIBS1 = $(NEXTAW_LIB)
1180NEXTAW_LIBS2 = -lXt
1181NEXTAW_INSTALL = install_normal
1182NEXTAW_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001183NEXTAW_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001184NEXTAW_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001185NEXTAW_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001186
1187### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld
1188# errors: ld: Undefined symbol
1189# _get_wmShellWidgetClass
1190# _get_applicationShellWidgetClass
1191# then you need to get patches 100512-02 and 100573-03 from Sun. In the
1192# meantime, uncomment the following GUI_X_LIBS definition as a workaround:
1193#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext
1194# If you also get cos, sin etc. as undefined symbols, try uncommenting this
1195# too:
1196#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm
1197
Bram Moolenaare1d12892004-06-13 13:02:36 +00001198# PHOTON GUI
1199PHOTONGUI_SRC = gui.c gui_photon.c pty.c
1200PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o
1201PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON
1202PHOTONGUI_IPATH =
1203PHOTONGUI_LIBS_DIR =
1204PHOTONGUI_LIBS1 = -lph -lphexlib
1205PHOTONGUI_LIBS2 =
1206PHOTONGUI_INSTALL = install_normal
1207PHOTONGUI_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001208PHOTONGUI_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001209PHOTONGUI_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001210PHOTONGUI_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001211
1212# CARBON GUI
1213CARBONGUI_SRC = gui.c gui_mac.c
1214CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o
1215CARBONGUI_DEFS = -DFEAT_GUI_MAC -arch ppc -fno-common -fpascal-strings \
1216 -Wall -Wno-unknown-pragmas \
1217 -mdynamic-no-pic -pipe
1218CARBONGUI_IPATH = -I. -Iproto
1219CARBONGUI_LIBS_DIR =
1220CARBONGUI_LIBS1 = -framework Carbon
1221CARBONGUI_LIBS2 =
1222CARBONGUI_INSTALL = install_macosx
1223CARBONGUI_TARGETS =
1224CARBONGUI_MAN_TARGETS =
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00001225CARBONGUI_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001226CARBONGUI_BUNDLE = gui_bundle
1227APPDIR = $(VIMNAME).app
1228CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001229
1230# All GUI files
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00001231ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c gui_kde.cc gui_kde_wid.cc gui_kde_x11.cc gui_kde_wid_moc.cc
Bram Moolenaar323850c2005-01-04 21:24:54 +00001232ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro
Bram Moolenaare1d12892004-06-13 13:02:36 +00001233
1234# }}}
1235
1236### Command to create dependencies based on #include "..."
1237### prototype headers are ignored due to -DPROTO, system
1238### headers #include <...> are ignored if we use the -MM option, as
1239### e.g. provided by gcc-cpp.
1240### Include FEAT_GUI to get gependency on gui.h
1241CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) $(DEPEND_CFLAGS)
1242
1243# flags for cproto
1244# This is for cproto 3 patchlevel 8 or below
1245# __inline, __attribute__ and __extension__ are not recognized by cproto
Bram Moolenaar051b7822005-05-19 21:00:46 +00001246NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \
1247 -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \
1248 -D__extension__= -D__restrict="" \
1249 -D__gnuc_va_list=char -D__builtin_va_list=char
Bram Moolenaare1d12892004-06-13 13:02:36 +00001250
1251#
1252# This is for cproto 3 patchlevel 9 or above (currently 4.6)
1253# __inline and __attribute__ are now recognized by cproto
1254# -D"foo()=" is not supported by all compilers so do not use it
1255# NO_ATTR=
1256#
1257# maybe the "/usr/bin/cc -E" has to be adjusted for some systems
1258# This is for cproto 3.5 patchlevel 3:
1259# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1260#
1261# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
1262# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1263#
1264# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
1265PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR)
1266
1267
1268################################################
1269## no changes required below this line ##
1270################################################
1271
1272SHELL = /bin/sh
1273
1274.SUFFIXES:
1275.SUFFIXES: .cc .c .o .pro
1276
1277PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS)
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001278POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001279
1280ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS)
1281
Bram Moolenaar051b7822005-05-19 21:00:46 +00001282LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca
1283
1284LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
Bram Moolenaare1d12892004-06-13 13:02:36 +00001285
1286DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS)
1287
1288PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS)
1289
1290ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR)
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001291ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001292
1293# abbreviations
1294DEST_BIN = $(DESTDIR)$(BINDIR)
1295DEST_VIM = $(DESTDIR)$(VIMLOC)
1296DEST_RT = $(DESTDIR)$(VIMRTLOC)
1297DEST_HELP = $(DESTDIR)$(HELPSUBLOC)
1298DEST_COL = $(DESTDIR)$(COLSUBLOC)
1299DEST_SYN = $(DESTDIR)$(SYNSUBLOC)
1300DEST_IND = $(DESTDIR)$(INDSUBLOC)
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00001301DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001302DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC)
1303DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC)
1304DEST_LANG = $(DESTDIR)$(LANGSUBLOC)
1305DEST_COMP = $(DESTDIR)$(COMPSUBLOC)
1306DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC)
1307DEST_MACRO = $(DESTDIR)$(MACROSUBLOC)
1308DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC)
1309DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001310DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001311DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC)
1312DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001313DEST_MAN_TOP = $(DESTDIR)$(MANDIR)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001314
1315# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages.
1316# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/"
1317# directory first.
Bram Moolenaar217ad922005-03-20 22:37:15 +00001318# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too.
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001319DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001320DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR)
1321DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR)
1322DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001323DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001324DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001325DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR)
1326DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR)
1327DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001328
1329# BASIC_SRC: files that are always used
1330# GUI_SRC: extra GUI files for current configuration
1331# ALL_GUI_SRC: all GUI files for Unix
1332#
1333# SRC: files used for current configuration
1334# TAGS_SRC: source files used for make tags
1335# TAGS_INCL: include files used for make tags
1336# ALL_SRC: source files used for make depend and make lint
1337
1338TAGS_INCL = *.h
1339
1340BASIC_SRC = \
1341 buffer.c \
1342 charset.c \
1343 diff.c \
1344 digraph.c \
1345 edit.c \
1346 eval.c \
1347 ex_cmds.c \
1348 ex_cmds2.c \
1349 ex_docmd.c \
1350 ex_eval.c \
1351 ex_getln.c \
1352 fileio.c \
1353 fold.c \
1354 getchar.c \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001355 hardcopy.c \
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00001356 hashtable.c \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001357 if_cscope.c \
1358 if_xcmdsrv.c \
1359 main.c \
1360 mark.c \
1361 memfile.c \
1362 memline.c \
1363 menu.c \
1364 message.c \
1365 misc1.c \
1366 misc2.c \
1367 move.c \
1368 mbyte.c \
1369 normal.c \
1370 ops.c \
1371 option.c \
1372 os_unix.c \
1373 auto/pathdef.c \
1374 quickfix.c \
1375 regexp.c \
1376 screen.c \
1377 search.c \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001378 spell.c \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001379 syntax.c \
1380 tag.c \
1381 term.c \
1382 ui.c \
1383 undo.c \
1384 version.c \
1385 window.c \
1386 $(OS_EXTRA_SRC)
1387
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001388SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \
1389 $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \
1390 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001391
Bram Moolenaar843ee412004-06-30 16:16:41 +00001392TAGS_SRC = *.c *.cpp *.cc if_perl.xs
Bram Moolenaare1d12892004-06-13 13:02:36 +00001393
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001394EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \
1395 if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \
1396 workshop.c wsdebug.c integration.c netbeans.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00001397
1398# All sources, also the ones that are not configured
1399ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC)
1400
1401# Which files to check with lint. Select one of these three lines. ALL_SRC
1402# checks more, but may not work well for checking a GUI that wasn't configured.
1403# The perl sources also don't work well with lint.
1404LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \
1405 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC)
1406#LINT_SRC = $(SRC)
1407#LINT_SRC = $(ALL_SRC)
1408
1409OBJ = \
1410 objects/buffer.o \
1411 objects/charset.o \
1412 objects/diff.o \
1413 objects/digraph.o \
1414 objects/edit.o \
1415 objects/eval.o \
1416 objects/ex_cmds.o \
1417 objects/ex_cmds2.o \
1418 objects/ex_docmd.o \
1419 objects/ex_eval.o \
1420 objects/ex_getln.o \
1421 objects/fileio.o \
1422 objects/fold.o \
1423 objects/getchar.o \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001424 objects/hardcopy.o \
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00001425 objects/hashtable.o \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001426 $(HANGULIN_OBJ) \
1427 objects/if_cscope.o \
1428 objects/if_xcmdsrv.o \
1429 objects/main.o \
1430 objects/mark.o \
1431 objects/memfile.o \
1432 objects/memline.o \
1433 objects/menu.o \
1434 objects/message.o \
1435 objects/misc1.o \
1436 objects/misc2.o \
1437 objects/move.o \
1438 objects/mbyte.o \
1439 objects/normal.o \
1440 objects/ops.o \
1441 objects/option.o \
1442 objects/os_unix.o \
1443 objects/pathdef.o \
1444 objects/quickfix.o \
1445 objects/regexp.o \
1446 objects/screen.o \
1447 objects/search.o \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001448 objects/spell.o \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001449 objects/syntax.o \
1450 $(SNIFF_OBJ) \
1451 objects/tag.o \
1452 objects/term.o \
1453 objects/ui.o \
1454 objects/undo.o \
1455 objects/window.o \
1456 $(GUI_OBJ) \
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001457 $(MZSCHEME_OBJ) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001458 $(PERL_OBJ) \
1459 $(PYTHON_OBJ) \
1460 $(TCL_OBJ) \
1461 $(RUBY_OBJ) \
1462 $(OS_EXTRA_OBJ) \
1463 $(WORKSHOP_OBJ) \
1464 $(NETBEANS_OBJ) \
1465 $(WSDEBUG_OBJ)
1466
1467PRO_AUTO = \
1468 buffer.pro \
1469 charset.pro \
1470 diff.pro \
1471 digraph.pro \
1472 edit.pro \
1473 eval.pro \
1474 ex_cmds.pro \
1475 ex_cmds2.pro \
1476 ex_docmd.pro \
1477 ex_eval.pro \
1478 ex_getln.pro \
1479 fileio.pro \
1480 fold.pro \
1481 getchar.pro \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001482 hardcopy.pro \
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00001483 hashtable.pro \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001484 hangulin.pro \
1485 if_cscope.pro \
1486 if_xcmdsrv.pro \
1487 if_python.pro \
1488 if_ruby.pro \
1489 main.pro \
1490 mark.pro \
1491 memfile.pro \
1492 memline.pro \
1493 menu.pro \
1494 message.pro \
1495 misc1.pro \
1496 misc2.pro \
1497 move.pro \
1498 mbyte.pro \
1499 normal.pro \
1500 ops.pro \
1501 option.pro \
1502 os_unix.pro \
1503 quickfix.pro \
1504 regexp.pro \
1505 screen.pro \
1506 search.pro \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001507 spell.pro \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001508 syntax.pro \
1509 tag.pro \
1510 term.pro \
1511 termlib.pro \
1512 ui.pro \
1513 undo.pro \
1514 version.pro \
1515 window.pro \
1516 gui_beval.pro \
1517 workshop.pro \
1518 netbeans.pro \
1519 $(ALL_GUI_PRO) \
1520 $(TCL_PRO)
1521
1522PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
1523 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO)
1524
1525# Default target is making the executable and tools
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00001526all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001527
1528tools: $(TOOLS)
1529
1530# Run configure with all the setting from above.
1531#
1532# Note: auto/config.h doesn't depend on configure, because running configure
1533# doesn't always update auto/config.h. The timestamp isn't changed if the
1534# file contents didn't change (to avoid recompiling everything). Including a
1535# dependency on auto/config.h would cause running configure each time when
1536# auto/config.h isn't updated. The dependency on auto/config.mk should make
1537# sure configure is run when it's needed.
1538#
1539config auto/config.mk: auto/configure config.mk.in config.h.in
1540 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \
1541 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
1542 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
1543 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
1544 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \
1545 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
1546 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
1547 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
1548 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \
1549 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001550 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001551
1552# Use "make reconfig" to rerun configure without cached values.
1553# When config.h changes, most things will be recompiled automatically.
Bram Moolenaar592e0a22004-07-03 16:05:59 +00001554# Invoke $(MAKE) to run config with the empty auto/config.mk.
1555# Invoke $(MAKE) to build all with the filled auto/config.mk.
1556reconfig: scratch clean
1557 $(MAKE) -f Makefile config
1558 $(MAKE) -f Makefile all
Bram Moolenaare1d12892004-06-13 13:02:36 +00001559
1560# Run autoconf to produce auto/configure.
1561# Note:
1562# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of
1563# producing auto/configure.
1564# - autoconf is not run automatically, because a patch usually changes both
1565# configure.in and auto/configure but can't update the timestamps. People
1566# who do not have (the correct version of) autoconf would run into trouble.
1567#
1568# Two tricks are required to make autoconf put its output in the "auto" dir:
1569# - Temporarily move the ./configure script to ./configure.save. Don't
1570# overwrite it, it's probably the result of an aborted autoconf.
1571# - Use sed to change ./config.log to auto/config.log in the configure script.
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001572# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take
1573# care of:
1574# - configure.lineno: has the line numbers replaced with $LINENO. That
1575# improves patches a LOT, thus use it instead (until someone says it doesn't
1576# work on some system).
1577# - autom4te.cache directory is created and not cleaned up. Delete it.
1578# - Uses ">config.log" instead of "./config.log".
Bram Moolenaare1d12892004-06-13 13:02:36 +00001579autoconf:
1580 if test ! -f configure.save; then mv configure configure.save; fi
1581 autoconf
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001582 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure
Bram Moolenaare1d12892004-06-13 13:02:36 +00001583 chmod 755 auto/configure
1584 mv -f configure.save configure
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001585 -rm -rf autom4te.cache
Bram Moolenaare1d12892004-06-13 13:02:36 +00001586 -rm -f auto/config.status auto/config.cache
1587
1588# Re-execute this Makefile to include the new auto/config.mk produced by
1589# configure Only used when typing "make" with a fresh auto/config.mk.
1590myself:
1591 $(MAKE) -f Makefile all
1592
1593
1594# The normal command to compile a .c file to its .o file.
1595CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS)
1596
1597
1598# Link the target for normal use or debugging.
1599# A shell script is used to try linking without unneccesary libraries.
1600$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h
1601 $(CCC) version.c -o objects/version.o
1602 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \
1603 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \
1604 MAKE="$(MAKE)" sh $(srcdir)/link.sh
1605
1606xxd/xxd$(EXEEXT): xxd/xxd.c
1607 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \
1608 $(MAKE) -f Makefile
1609
1610# Build the language specific files if they were unpacked.
1611# Generate the converted .mo files separately, it's no problem if this fails.
1612languages:
1613 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
Bram Moolenaar58d98232005-07-23 22:25:46 +00001614 cd $(PODIR); \
1615 CC="$(CC)" $(MAKE) check; \
1616 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001617 fi
1618 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1619 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \
1620 fi
1621
1622# Update the *.po files for changes in the sources. Only run manually.
1623update-po:
1624 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po
1625
1626# Generate function prototypes. This is not needed to compile vim, but if
1627# you want to use it, cproto is out there on the net somewhere -- Webb
1628#
1629# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a
1630# few include files that can not be found, that's OK.
1631
1632proto: $(PRO_AUTO) $(PRO_MANUAL)
1633
1634### Would be nice if this would work for "normal" make.
1635### Currently it only works for (Free)BSD make.
1636#$(PRO_AUTO): $$(*F).c
1637# cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@
1638
1639# Always define FEAT_GUI. This may generate a few warnings if it's also
1640# defined in auto/config.h, you can ignore that.
1641.c.pro:
1642 cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@
1643 echo "/* vim: set ft=c : */" >> proto/$@
1644
1645os_amiga.pro: os_amiga.c
1646 cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@
1647 echo "/* vim: set ft=c : */" >> proto/$@
1648
1649os_msdos.pro: os_msdos.c
1650 cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@
1651 echo "/* vim: set ft=c : */" >> proto/$@
1652
1653os_win16.pro: os_win16.c
1654 cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@
1655 echo "/* vim: set ft=c : */" >> proto/$@
1656
1657os_win32.pro: os_win32.c
1658 cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1659 echo "/* vim: set ft=c : */" >> proto/$@
1660
1661os_mswin.pro: os_mswin.c
1662 cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1663 echo "/* vim: set ft=c : */" >> proto/$@
1664
1665os_beos.pro: os_beos.c
1666 cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@
1667 echo "/* vim: set ft=c : */" >> proto/$@
1668
1669os_vms.pro: os_vms.c
1670# must use os_vms_conf.h for auto/config.h
1671 mv auto/config.h auto/config.h.save
1672 cp os_vms_conf.h auto/config.h
1673 cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@
1674 echo "/* vim: set ft=c : */" >> proto/$@
1675 rm auto/config.h
1676 mv auto/config.h.save auto/config.h
1677
1678# if_perl.pro is special: Use the generated if_perl.c for input and remove
1679# prototypes for local functions.
1680if_perl.pro: auto/if_perl.c
1681 cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@
1682
1683
1684notags:
1685 -rm -f tags
1686
1687# Note: tags is made for the currently configured version, can't include both
1688# Motif and Athena GUI
1689# You can ignore error messages for missing files.
1690tags TAGS: notags
1691 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL)
1692
1693# Make a highlight file for types. Requires Exuberant ctags and awk
1694types: types.vim
1695types.vim: $(TAGS_SRC) $(TAGS_INCL)
1696 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\
1697 awk 'BEGIN{printf("syntax keyword Type\t")}\
1698 {printf("%s ", $$1)}END{print ""}' > $@
1699
1700# Execute the test scripts. Run these after compiling Vim, before installing.
1701# This doesn't depend on $(VIMTARGET), because that won't work when configure
1702# wasn't run yet. Restart make to build it instead.
1703#
1704# This will produce a lot of garbage on your screen, including a few error
1705# messages. Don't worry about that.
1706# If there is a real error, there will be a difference between "test.out" and
1707# a "test99.ok" file.
1708# If everything is allright, the final message will be "ALL DONE".
1709#
1710test check:
1711 $(MAKE) -f Makefile $(VIMTARGET)
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00001712 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001713
1714testclean:
1715 cd testdir; $(MAKE) -f Makefile clean
1716
1717#
1718# Avoid overwriting an existing executable, somebody might be running it and
1719# overwriting it could cause it to crash. Deleting it is OK, it won't be
1720# really deleted until all running processes for it have exited. It is
1721# renamed first, in case the deleting doesn't work.
1722#
1723# If you want to keep an older version, rename it before running "make
1724# install".
1725#
1726install: $(GUI_INSTALL)
1727
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001728install_normal: installvim installtools $(INSTALL_LANGS) install-icons
Bram Moolenaare1d12892004-06-13 13:02:36 +00001729
Bram Moolenaare344bea2005-09-01 20:46:49 +00001730installvim: installvimbin installtutorbin \
1731 installruntime installlinks installmanlinks
Bram Moolenaare1d12892004-06-13 13:02:36 +00001732
1733installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN)
1734 -if test -f $(DEST_BIN)/$(VIMTARGET); then \
1735 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \
1736 rm -f $(DEST_BIN)/$(VIMNAME).rm; \
1737 fi
1738 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN)
1739 $(STRIP) $(DEST_BIN)/$(VIMTARGET)
1740 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET)
1741# may create a link to the new executable from /usr/bin/vi
1742 -$(LINKIT)
1743
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001744# Long list of arguments for the shell script that installs the manual pages
1745# for one language.
1746INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \
1747 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME)
1748
Bram Moolenaare344bea2005-09-01 20:46:49 +00001749# Install most of the runtime files
1750installruntime: installrtbase installmacros installtutor installspell
1751
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001752# install the help files; first adjust the contents for the final location
Bram Moolenaare344bea2005-09-01 20:46:49 +00001753installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001754 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00001755 $(DEST_FTP) $(DEST_AUTO) $(DEST_PLUG) $(DEST_TUTOR) \
1756 $(DEST_SPELL) $(DEST_COMP)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001757 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001758 @echo generating help tags
1759# Generate the help tags with ":helptags" to handle all languages.
1760 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags
1761 cd $(HELPSOURCE); \
1762 files=`ls *.txt tags`; \
1763 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \
1764 $(INSTALL_DATA) $$files $(DEST_HELP); \
1765 cd $(DEST_HELP); \
1766 chmod $(HELPMOD) $$files
1767 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP)
1768 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl
1769# install the menu files
1770 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE)
1771 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE)
1772 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE)
1773 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE)
1774 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE)
1775 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE)
1776# install the evim file
1777 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE)
1778 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE)
1779 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE)
1780 chmod $(VIMSCRIPTMOD) $(EVIM_FILE)
1781# install the bugreport file
1782 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE)
1783 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE)
1784# install the example vimrc files
1785 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT)
1786 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim
1787 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT)
1788 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim
1789# install the file type detection files
1790 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE)
1791 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE)
1792 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE)
1793 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE)
1794 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE)
1795 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE)
1796 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE)
1797 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE)
1798 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE)
1799 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE)
1800 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE)
1801 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE)
1802 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE)
1803 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE)
1804 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE)
1805 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE)
1806# install the print resource files
1807 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT)
1808 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps
1809# install the colorscheme files
1810 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL)
1811 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt
1812# install the syntax files
1813 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN)
1814 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt
1815# install the indent files
1816 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND)
1817 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00001818# install the standard autoload files
1819 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO)
1820 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt
Bram Moolenaare1d12892004-06-13 13:02:36 +00001821# install the standard plugin files
1822 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG)
1823 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt
1824# install the ftplugin files
1825 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP)
1826 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt
1827# install the compiler files
1828 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP)
1829 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt
1830
Bram Moolenaar582fd852005-03-28 20:58:01 +00001831installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001832 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO)
1833 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print`
1834 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print`
1835 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh
1836# When using CVS some CVS directories might have been copied.
1837 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \
1838 if test -n "$$cvs"; then \
1839 rm -rf $$cvs; \
1840 fi
1841
1842# install the tutor files
Bram Moolenaare344bea2005-09-01 20:46:49 +00001843installtutorbin: $(DEST_VIM)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001844 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor
1845 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor
Bram Moolenaare344bea2005-09-01 20:46:49 +00001846
1847installtutor: $(DEST_RT) $(DEST_TUTOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001848 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR)
1849 chmod $(HELPMOD) $(DEST_TUTOR)/*
1850
Bram Moolenaarcee55602005-08-21 22:12:59 +00001851# Install the spell files, if they exist. This assumes at least the English
1852# spell file is there.
Bram Moolenaar582fd852005-03-28 20:58:01 +00001853installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
Bram Moolenaar0e21a3f2005-04-17 20:28:32 +00001854 if test -f $(SPELLSOURCE)/en.latin1.spl; then \
Bram Moolenaara6c840d2005-08-22 22:59:46 +00001855 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.vim $(DEST_SPELL); \
1856 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.vim; \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001857 fi
1858
Bram Moolenaare1d12892004-06-13 13:02:36 +00001859# install helper program xxd
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001860installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001861 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \
1862 $(INSTALL_TOOL_LANGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001863 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \
1864 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \
1865 rm -f $(DEST_BIN)/xxd.rm; \
1866 fi
1867 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN)
1868 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT)
1869 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001870 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001871
Bram Moolenaare1d12892004-06-13 13:02:36 +00001872# install the runtime tools
1873 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS)
1874# When using CVS some CVS directories might have been copied.
1875 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \
1876 if test -n "$$cvs"; then \
1877 rm -rf $$cvs; \
1878 fi
1879 -chmod $(FILEMOD) $(DEST_TOOLS)/*
1880# replace the path in some tools
1881 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl
1882 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1883 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1884 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi
1885 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*`
1886
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001887# install the language specific files for tools, if they were unpacked
1888install-tool-languages:
1889 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1890 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1891 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1892 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1893 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1894 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
1895 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1896 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1897
Bram Moolenaare1d12892004-06-13 13:02:36 +00001898# install the language specific files, if they were unpacked
1899install-languages: languages $(DEST_LANG) $(DEST_KMAP)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001900 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1901 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1902 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001903 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001904 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001905 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001906 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001907 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001908 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001909 $(DEST_MAN_FR) $(INSTALLMLARGS)
1910 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1911 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
1912 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1913 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
1914 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001915 $(DEST_MAN_IT) $(INSTALLMLARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001916 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001917 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
1918 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001919 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
1920 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001921 $(DEST_MAN_RU) $(INSTALLMLARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001922 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1923 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001924 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1925 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \
1926 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \
1927 fi
1928 if test -d $(LANGSOURCE); then \
1929 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \
1930 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \
1931 fi
1932 if test -d $(KMAPSOURCE); then \
1933 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \
1934 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \
1935 fi
1936
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001937# Install the icons for the KDE GUI. This differs from the KDE icons for
1938# other GUIs.
Bram Moolenaar843ee412004-06-30 16:16:41 +00001939installkdeicons:
1940 mkdir -p $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/
1941 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/
1942 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/
1943 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/
1944 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/
1945 mkdir -p $(DESTDIR)$(KDE_DIR)/share/apps/kvim
1946
1947 cp ../runtime/KVim.desktop $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/ && chmod 644 $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/KVim.desktop
1948 cp ../runtime/kvim32x32.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png
1949 cp ../runtime/kvim48x48.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png
1950 cp ../runtime/hi16-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/hi16-action-make.png
1951 cp ../runtime/hi22-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/hi22-action-make.png
1952 cp ../runtime/kde-tips $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips && chmod 644 $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips
1953
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001954# install the icons for KDE, if the directory exists and the icon doesn't.
Bram Moolenaare1d12892004-06-13 13:02:36 +00001955ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps
1956ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps
1957ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps
1958KDEPATH = $(HOME)/.kde/share/icons
1959install-icons:
1960 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \
1961 -a ! -f $(ICON48PATH)/gvim.png; then \
1962 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \
1963 fi
1964 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \
1965 -a ! -f $(ICON32PATH)/gvim.png; then \
1966 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \
1967 fi
1968 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \
1969 -a ! -f $(ICON16PATH)/gvim.png; then \
1970 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \
1971 fi
1972
1973
1974$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE):
1975 @echo Runtime files not found.
1976 @echo You need to unpack the runtime archive before running "make install".
1977 test -f error
1978
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001979$(DESTDIR)$(exec_prefix) $(DEST_BIN) \
1980 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001981 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \
1982 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001983 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00001984 $(DEST_AUTO) $(DEST_PLUG):
Bram Moolenaare1d12892004-06-13 13:02:36 +00001985 -$(SHELL) ./mkinstalldirs $@
1986 -chmod $(DIRMOD) $@
1987
1988# create links from various names to vim. This is only done when the links
1989# (or executables with the same name) don't exist yet.
1990installlinks: $(GUI_TARGETS) \
1991 $(DEST_BIN)/$(EXTARGET) \
1992 $(DEST_BIN)/$(VIEWTARGET) \
1993 $(DEST_BIN)/$(RVIMTARGET) \
1994 $(DEST_BIN)/$(RVIEWTARGET) \
1995 $(INSTALLVIMDIFF)
1996
1997installglinks: $(DEST_BIN)/$(GVIMTARGET) \
1998 $(DEST_BIN)/$(GVIEWTARGET) \
1999 $(DEST_BIN)/$(RGVIMTARGET) \
2000 $(DEST_BIN)/$(RGVIEWTARGET) \
2001 $(DEST_BIN)/$(EVIMTARGET) \
2002 $(DEST_BIN)/$(EVIEWTARGET) \
2003 $(INSTALLGVIMDIFF)
2004
2005installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET)
2006installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET)
2007
2008$(DEST_BIN)/$(EXTARGET):
2009 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET)
2010
2011$(DEST_BIN)/$(VIEWTARGET):
2012 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET)
2013
2014$(DEST_BIN)/$(GVIMTARGET):
2015 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET)
2016
2017$(DEST_BIN)/$(GVIEWTARGET):
2018 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET)
2019
2020$(DEST_BIN)/$(RVIMTARGET):
2021 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET)
2022
2023$(DEST_BIN)/$(RVIEWTARGET):
2024 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET)
2025
2026$(DEST_BIN)/$(RGVIMTARGET):
2027 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET)
2028
2029$(DEST_BIN)/$(RGVIEWTARGET):
2030 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET)
2031
2032$(DEST_BIN)/$(VIMDIFFTARGET):
2033 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET)
2034
2035$(DEST_BIN)/$(GVIMDIFFTARGET):
2036 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET)
2037
2038$(DEST_BIN)/$(EVIMTARGET):
2039 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET)
2040
2041$(DEST_BIN)/$(EVIEWTARGET):
2042 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET)
2043
2044# create links for the manual pages with various names to vim. This is only
2045# done when the links (or manpages with the same name) don't exist yet.
Bram Moolenaare1d12892004-06-13 13:02:36 +00002046
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002047INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \
2048 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \
2049 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \
2050 $(GVIMDIFFNAME) $(EVIEWNAME)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002051
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002052installmanlinks:
2053 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2054 $(DEST_MAN) $(INSTALLMLARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002055
2056uninstall: uninstall_runtime
2057 -rm -f $(DEST_BIN)/$(VIMTARGET)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002058 -rm -f $(DEST_BIN)/vimtutor
Bram Moolenaare1d12892004-06-13 13:02:36 +00002059 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET)
2060 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET)
2061 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET)
2062 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET)
2063 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET)
2064 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002065 -rm -f $(DEST_BIN)/xxd$(EXEEXT)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002066
2067# Note: the "rmdir" will fail if any files were added after "make install"
2068uninstall_runtime:
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002069 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002070 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS)
2071 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS)
2072 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002073 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS)
Bram Moolenaar217ad922005-03-20 22:37:15 +00002074 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002075 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS)
2076 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS)
2077 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002078 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2079 $(DEST_MAN) $(INSTALLMLARGS)
2080 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002081 $(DEST_MAN_FR) $(INSTALLMLARGS)
2082 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2083 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
2084 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2085 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
2086 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002087 $(DEST_MAN_IT) $(INSTALLMLARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002088 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar217ad922005-03-20 22:37:15 +00002089 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
2090 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002091 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
2092 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002093 $(DEST_MAN_RU) $(INSTALLMLARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002094 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2095 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
2096 -rm -f $(DEST_MAN)/xxd.1
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002097 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1
Bram Moolenaar217ad922005-03-20 22:37:15 +00002098 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002099 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1
Bram Moolenaare1d12892004-06-13 13:02:36 +00002100 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl
2101 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-??
2102 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE)
2103 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE)
2104 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim
2105 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE)
2106 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE)
2107 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE)
2108 -rm -f $(SYS_OPTWIN_FILE)
2109 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt
2110 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt
2111 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt
2112 -rm -rf $(DEST_MACRO)
2113 -rm -rf $(DEST_TUTOR)
Bram Moolenaar217ad922005-03-20 22:37:15 +00002114 -rm -rf $(DEST_SPELL)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002115 -rm -rf $(DEST_TOOLS)
2116 -rm -rf $(DEST_LANG)
2117 -rm -rf $(DEST_KMAP)
2118 -rm -rf $(DEST_COMP)
2119 -rm -f $(DEST_PRINT)/*.ps
2120 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND)
2121 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00002122 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt
Bram Moolenaare1d12892004-06-13 13:02:36 +00002123 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt
Bram Moolenaar87e25fd2005-07-27 21:13:01 +00002124 -rmdir $(DEST_FTP) $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002125# This will fail when other Vim versions are installed, no worries.
2126 -rmdir $(DEST_VIM)
2127
2128# Clean up all the files that have been produced, except configure's.
2129# We support common typing mistakes for Juergen! :-)
2130clean celan: testclean
2131 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) xxd/*.o
2132 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c
2133 -rm -f conftest* *~ auto/link.sed
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002134 -rm -rf $(APPDIR)
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002135 -rm -f gui_kde_wid_moc.cc kvim_iface_skel.cc *.kidl
Bram Moolenaare1d12892004-06-13 13:02:36 +00002136 if test -d $(PODIR); then \
2137 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \
2138 fi
2139
2140# Make a shadow directory for compilation on another system or with different
2141# features.
2142SHADOWDIR = shadow
2143
2144shadow: runtime pixmaps
2145 mkdir $(SHADOWDIR)
2146 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../vimtutor ../mkinstalldirs .
2147 mkdir $(SHADOWDIR)/auto
2148 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure .
2149 cd $(SHADOWDIR); rm -f auto/link.sed
2150 cp Makefile configure $(SHADOWDIR)
2151 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist
2152 cp config.mk.dist $(SHADOWDIR)/auto/config.mk
2153 cp config.mk.dist $(SHADOWDIR)
2154 mkdir $(SHADOWDIR)/xxd
2155 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* .
2156 mkdir $(SHADOWDIR)/testdir
2157 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \
2158 ../../testdir/vimrc.unix \
2159 ../../testdir/*.in \
2160 ../../testdir/unix.vim \
2161 ../../testdir/*.ok .
2162
2163# Link needed for doing "make install" in a shadow directory.
2164runtime:
2165 -ln -s ../runtime .
2166
2167# Link needed for doing "make" using GTK in a shadow directory.
2168pixmaps:
2169 -ln -s ../pixmaps .
2170
2171# Update the synmenu.vim file with the latest Syntax menu.
2172# This is only needed when runtime/makemenu.vim was changed.
2173menu: ./vim ../runtime/makemenu.vim
2174 ./vim -u ../runtime/makemenu.vim
2175
2176# Start configure from scratch
2177scrub scratch:
2178 -rm -f auto/config.status auto/config.cache config.log auto/config.log
2179 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk
2180 touch auto/config.h
2181 cp config.mk.dist auto/config.mk
2182
2183distclean: clean scratch
2184 -rm -f tags
2185
2186dist: distclean
2187 @echo
2188 @echo Making the distribution has to be done in the top directory
2189
2190mdepend:
2191 -@rm -f Makefile~
2192 cp Makefile Makefile~
2193 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2194 @for i in $(ALL_SRC) ; do \
2195 echo "$$i" ; \
2196 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\
2197 $(CPP) $$i |\
2198 grep '^# .*"\./.*\.h"' |\
2199 sort -t'"' -u +1 -2 |\
2200 sed -e 's/.*"\.\/\(.*\)".*/\1/'\
2201 ` >> tmp_make ; \
2202 done
2203 mv tmp_make Makefile
2204
2205depend:
2206 -@rm -f Makefile~
2207 cp Makefile Makefile~
2208 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2209 -for i in $(ALL_SRC); do echo $$i; \
2210 $(CPP_DEPEND) $$i | \
2211 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done
2212 mv tmp_make Makefile
2213
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002214# Run lint. Clean up the *.ln files that are sometimes left behind.
Bram Moolenaare1d12892004-06-13 13:02:36 +00002215lint:
Bram Moolenaar051b7822005-05-19 21:00:46 +00002216 lint $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC)
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002217 -rm -f *.ln
Bram Moolenaare1d12892004-06-13 13:02:36 +00002218
2219# Check dosinst.c with lint.
2220lintinstall:
2221 lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002222 -rm -f dosinst.ln
Bram Moolenaare1d12892004-06-13 13:02:36 +00002223
2224###########################################################################
2225
2226.c.o:
2227 $(CCC) $<
2228
2229.cc.o:
2230 $(CCC) $<
2231
2232auto/if_perl.c: if_perl.xs
2233 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@
2234 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \
2235 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@
2236
2237auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in
2238 CC="$(CC) $(ALL_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh
2239
2240QUOTESED = sed -e 's/"/\\"/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
2241auto/pathdef.c: Makefile auto/config.mk
2242 -@echo creating $@
2243 -@echo '/* pathdef.c */' > $@
2244 -@echo '/* This file is automatically created by Makefile' >> $@
2245 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@
2246 -@echo '#include "vim.h"' >> $@
2247 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@
2248 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@
2249 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@
2250 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@
2251 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@
2252 -@if test -n "$(COMPILEDBY)"; then \
2253 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \
2254 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi
2255 -@echo '";' >> $@
2256 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@
2257 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi
2258 -@echo '";' >> $@
2259 -@sh $(srcdir)/pathdef.sh
2260
2261# All the object files are put in the "objects" directory. Since not all make
2262# commands understand putting object files in another directory, it must be
2263# specified for each file separately.
2264
2265objects:
2266 mkdir objects
2267
2268objects/buffer.o: buffer.c
2269 $(CCC) -o $@ buffer.c
2270
2271objects/charset.o: charset.c
2272 $(CCC) -o $@ charset.c
2273
2274objects/diff.o: diff.c
2275 $(CCC) -o $@ diff.c
2276
2277objects/digraph.o: digraph.c
2278 $(CCC) -o $@ digraph.c
2279
2280objects/edit.o: edit.c
2281 $(CCC) -o $@ edit.c
2282
2283objects/eval.o: eval.c
2284 $(CCC) -o $@ eval.c
2285
2286objects/ex_cmds.o: ex_cmds.c
2287 $(CCC) -o $@ ex_cmds.c
2288
2289objects/ex_cmds2.o: ex_cmds2.c
2290 $(CCC) -o $@ ex_cmds2.c
2291
2292objects/ex_docmd.o: ex_docmd.c
2293 $(CCC) -o $@ ex_docmd.c
2294
2295objects/ex_eval.o: ex_eval.c
2296 $(CCC) -o $@ ex_eval.c
2297
2298objects/ex_getln.o: ex_getln.c
2299 $(CCC) -o $@ ex_getln.c
2300
2301objects/fileio.o: fileio.c
2302 $(CCC) -o $@ fileio.c
2303
2304objects/fold.o: fold.c
2305 $(CCC) -o $@ fold.c
2306
2307objects/getchar.o: getchar.c
2308 $(CCC) -o $@ getchar.c
2309
Bram Moolenaar58d98232005-07-23 22:25:46 +00002310objects/hardcopy.o: hardcopy.c
2311 $(CCC) -o $@ hardcopy.c
2312
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00002313objects/hashtable.o: hashtable.c
2314 $(CCC) -o $@ hashtable.c
2315
Bram Moolenaare1d12892004-06-13 13:02:36 +00002316objects/gui.o: gui.c
2317 $(CCC) -o $@ gui.c
2318
2319objects/gui_at_fs.o: gui_at_fs.c
2320 $(CCC) -o $@ gui_at_fs.c
2321
2322objects/gui_at_sb.o: gui_at_sb.c
2323 $(CCC) -o $@ gui_at_sb.c
2324
2325objects/gui_athena.o: gui_athena.c
2326 $(CCC) -o $@ gui_athena.c
2327
Bram Moolenaare1d12892004-06-13 13:02:36 +00002328objects/gui_beval.o: gui_beval.c
2329 $(CCC) -o $@ gui_beval.c
2330
2331objects/gui_gtk.o: gui_gtk.c
2332 $(CCC) -o $@ gui_gtk.c
2333
2334objects/gui_gtk_f.o: gui_gtk_f.c
2335 $(CCC) -o $@ gui_gtk_f.c
2336
2337objects/gui_gtk_x11.o: gui_gtk_x11.c
2338 $(CCC) -o $@ gui_gtk_x11.c
2339
2340objects/gui_motif.o: gui_motif.c
2341 $(CCC) -o $@ gui_motif.c
2342
Bram Moolenaardfccaf02004-12-31 20:56:11 +00002343objects/gui_xmdlg.o: gui_xmdlg.c
2344 $(CCC) -o $@ gui_xmdlg.c
2345
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00002346objects/gui_xmebw.o: gui_xmebw.c
2347 $(CCC) -o $@ gui_xmebw.c
2348
Bram Moolenaare1d12892004-06-13 13:02:36 +00002349objects/gui_x11.o: gui_x11.c
2350 $(CCC) -o $@ gui_x11.c
2351
2352objects/gui_photon.o: gui_photon.c
2353 $(CCC) -o $@ gui_photon.c
2354
2355objects/gui_mac.o: gui_mac.c
2356 $(CCC) -o $@ gui_mac.c
2357
2358objects/hangulin.o: hangulin.c
2359 $(CCC) -o $@ hangulin.c
2360
2361objects/if_cscope.o: if_cscope.c
2362 $(CCC) -o $@ if_cscope.c
2363
2364objects/if_xcmdsrv.o: if_xcmdsrv.c
2365 $(CCC) -o $@ if_xcmdsrv.c
2366
Bram Moolenaar325b7a22004-07-05 15:58:32 +00002367objects/if_mzsch.o: if_mzsch.c
2368 $(CCC) -o $@ if_mzsch.c
2369
Bram Moolenaare1d12892004-06-13 13:02:36 +00002370objects/if_perl.o: auto/if_perl.c
2371 $(CCC) -o $@ auto/if_perl.c
2372
2373objects/if_perlsfio.o: if_perlsfio.c
2374 $(CCC) -o $@ if_perlsfio.c
2375
2376objects/if_python.o: if_python.c
2377 $(CCC) -o $@ if_python.c
2378
2379objects/if_ruby.o: if_ruby.c
2380 $(CCC) -o $@ if_ruby.c
2381
2382objects/if_sniff.o: if_sniff.c
2383 $(CCC) -o $@ if_sniff.c
2384
2385objects/if_tcl.o: if_tcl.c
2386 $(CCC) -o $@ if_tcl.c
2387
2388objects/integration.o: integration.c
2389 $(CCC) -o $@ integration.c
2390
2391objects/main.o: main.c
2392 $(CCC) -o $@ main.c
2393
2394objects/mark.o: mark.c
2395 $(CCC) -o $@ mark.c
2396
2397objects/memfile.o: memfile.c
2398 $(CCC) -o $@ memfile.c
2399
2400objects/memline.o: memline.c
2401 $(CCC) -o $@ memline.c
2402
2403objects/menu.o: menu.c
2404 $(CCC) -o $@ menu.c
2405
2406objects/message.o: message.c
2407 $(CCC) -o $@ message.c
2408
2409objects/misc1.o: misc1.c
2410 $(CCC) -o $@ misc1.c
2411
2412objects/misc2.o: misc2.c
2413 $(CCC) -o $@ misc2.c
2414
2415objects/move.o: move.c
2416 $(CCC) -o $@ move.c
2417
2418objects/mbyte.o: mbyte.c
2419 $(CCC) -o $@ mbyte.c
2420
2421objects/normal.o: normal.c
2422 $(CCC) -o $@ normal.c
2423
2424objects/ops.o: ops.c
2425 $(CCC) -o $@ ops.c
2426
2427objects/option.o: option.c
2428 $(CCC) -o $@ option.c
2429
2430objects/os_beos.o: os_beos.c
2431 $(CCC) -o $@ os_beos.c
2432
2433objects/os_qnx.o: os_qnx.c
2434 $(CCC) -o $@ os_qnx.c
2435
2436objects/os_macosx.o: os_macosx.c
2437 $(CCC) -o $@ os_macosx.c
2438
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002439objects/os_mac_conv.o: os_mac_conv.c
2440 $(CCC) -o $@ os_mac_conv.c
2441
Bram Moolenaare1d12892004-06-13 13:02:36 +00002442objects/os_unix.o: os_unix.c
2443 $(CCC) -o $@ os_unix.c
2444
2445objects/pathdef.o: auto/pathdef.c
2446 $(CCC) -o $@ auto/pathdef.c
2447
2448objects/py_config.o: $(PYTHON_CONFDIR)/config.c
2449 $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \
2450 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
2451
2452objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c
2453 $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \
2454 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \
2455 $(PYTHON_GETPATH_CFLAGS)
2456
2457objects/pty.o: pty.c
2458 $(CCC) -o $@ pty.c
2459
2460objects/quickfix.o: quickfix.c
2461 $(CCC) -o $@ quickfix.c
2462
2463objects/regexp.o: regexp.c
2464 $(CCC) -o $@ regexp.c
2465
2466objects/screen.o: screen.c
2467 $(CCC) -o $@ screen.c
2468
2469objects/search.o: search.c
2470 $(CCC) -o $@ search.c
2471
Bram Moolenaar217ad922005-03-20 22:37:15 +00002472objects/spell.o: spell.c
2473 $(CCC) -o $@ spell.c
2474
Bram Moolenaare1d12892004-06-13 13:02:36 +00002475objects/syntax.o: syntax.c
2476 $(CCC) -o $@ syntax.c
2477
2478objects/tag.o: tag.c
2479 $(CCC) -o $@ tag.c
2480
2481objects/term.o: term.c
2482 $(CCC) -o $@ term.c
2483
2484objects/ui.o: ui.c
2485 $(CCC) -o $@ ui.c
2486
2487objects/undo.o: undo.c
2488 $(CCC) -o $@ undo.c
2489
2490objects/window.o: window.c
2491 $(CCC) -o $@ window.c
2492
2493objects/workshop.o: workshop.c
2494 $(CCC) -o $@ workshop.c
2495
2496objects/wsdebug.o: wsdebug.c
2497 $(CCC) -o $@ wsdebug.c
2498
Bram Moolenaar843ee412004-06-30 16:16:41 +00002499objects/gui_kde.o: gui_kde.cc
2500 $(CCC) -o $@ gui_kde.cc
2501
2502objects/gui_kde_x11.o: gui_kde_x11.cc
2503 $(CCC) -o $@ gui_kde_x11.cc
2504
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002505objects/gui_kde_wid.o: gui_kde_wid.cc
2506 $(MOC) -o gui_kde_wid_moc.cc gui_kde_wid.h
Bram Moolenaar843ee412004-06-30 16:16:41 +00002507 $(KDE_DIR)/bin/dcopidl kvim_iface.h > kvim_iface.kidl || ( rm -f kvim_iface.kidl ; /bin/false )
2508 $(KDE_DIR)/bin/dcopidl2cpp --c++-suffix cc --no-stub kvim_iface.kidl
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002509 $(CCC) -o $@ gui_kde_wid.cc
Bram Moolenaar843ee412004-06-30 16:16:41 +00002510
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002511gui_kde_wid_moc.cc: objects/gui_kde_wid.o
2512objects/gui_kde_wid_moc.o: gui_kde_wid_moc.cc
2513 $(CCC) -o $@ gui_kde_wid_moc.cc
Bram Moolenaar843ee412004-06-30 16:16:41 +00002514
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002515kvim_iface_skel.cc: objects/gui_kde_wid.o
Bram Moolenaar843ee412004-06-30 16:16:41 +00002516objects/kvim_iface_skel.o: kvim_iface_skel.cc
2517 $(CCC) -o $@ kvim_iface_skel.cc
2518
Bram Moolenaare1d12892004-06-13 13:02:36 +00002519objects/netbeans.o: netbeans.c
2520 $(CCC) -o $@ netbeans.c
2521
2522Makefile:
2523 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!!
2524
2525###############################################################################
2526### MacOS X installation
2527###
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002528### This installs a runnable Vim.app in $(prefix)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002529
2530REZ = /Developer/Tools/Rez
Bram Moolenaare1d12892004-06-13 13:02:36 +00002531RESDIR = $(APPDIR)/Contents/Resources
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00002532VERSION = $(VIMMAJOR).$(VIMMINOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002533
2534### Common flags
2535M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \
2536 -DAPP_VER=$(VERSION) -DICON_APP=$(ICON_APP)
2537
2538### Icons
2539ICON_APP = gui_mac.icns
2540ICONS = $(RESDIR)/$(ICON_APP)
2541
2542# If you uncomment the following lines the *.icns in the src directory will be
2543# detected by this Makefile automatically, and used for Vim.
2544#ICON_APP = $(shell if [ -e app.icns ] ; then echo app.icns ; else echo gui_mac.icns ; fi)
2545#ICON_DOC = $(shell if [ -e doc.icns ] ; then echo doc.icns ; else echo ; fi)
2546#ICON_DOCTXT = $(shell if [ -e doc-txt.icns ] ; then echo doc-txt.icns ; else echo ; fi)
2547#ICONS = $(addprefix $(RESDIR)/, $(ICON_APP) $(ICON_DOC) $(ICON_DOCTXT))
2548
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002549install_macosx: gui_bundle
Bram Moolenaare344bea2005-09-01 20:46:49 +00002550# Remove the link to the runtime dir, don't want to copy all of that.
2551 -rm $(APPDIR)/runtime
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002552 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix)
Bram Moolenaare344bea2005-09-01 20:46:49 +00002553# Install the runtime files. Recursive!
2554 -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/runtime
2555 -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin
2556 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \
2557 VIMEXE=$$srcdir/$(VIMTARGET) \
2558 prefix=$(DESTDIR)$(prefix)/$(APPDIR) \
2559 VIMRTLOC=$(DESTDIR)$(prefix)/$(APPDIR)/runtime
2560# Put the link back.
2561 ln -s `pwd`/../runtime $(APPDIR)
2562# TODO: Create the vimtutor application.
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002563
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002564gui_bundle: $(APPDIR) bundle-dir bundle-executable bundle-info bundle-resource \
Bram Moolenaare1d12892004-06-13 13:02:36 +00002565 bundle-language
2566
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002567$(APPDIR):
2568 mkdir -p $@
2569
Bram Moolenaare1d12892004-06-13 13:02:36 +00002570bundle-dir: $(APPDIR)/Contents $(VIMTARGET)
2571 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags
Bram Moolenaare344bea2005-09-01 20:46:49 +00002572# Make a link to the runtime directory, so that we can try out the executable
2573# without installing it.
2574 -ln -s `pwd`/../runtime $(APPDIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002575
2576bundle-executable: $(VIMTARGET)
2577 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET)
2578
2579bundle-info: bundle-dir
2580 @echo "Creating PkgInfo"
2581 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo
2582 @echo "Creating Info.plist"
2583 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist
2584
2585bundle-resource: bundle-dir bundle-icons bundle-rsrc
2586
2587bundle-icons: $(ICONS)
2588
2589### Classic resources
2590# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9)
2591# This file is also required for OS X Vim.
2592bundle-rsrc: os_mac.rsr.hqx
2593 @echo "Creating resource fork"
2594 python dehqx.py $<
2595 rm -f gui_mac.rsrc
2596 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc
2597
2598# po/Make_osx.pl says something about generating a Mac message file
2599# for Ukrananian. Would somebody using Mac OS X in Ukranian
2600# *really* be upset that Carbon Vim was not localised in
2601# Ukranian?
2602#
2603#bundle-language: bundle-dir po/Make_osx.pl
2604# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG)
2605bundle-language: bundle-dir
2606
2607$(APPDIR)/Contents:
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002608 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS
2609 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj
Bram Moolenaare1d12892004-06-13 13:02:36 +00002610
2611$(RESDIR)/%.icns: %.icns
2612 cp $< $@
2613
2614
2615###############################################################################
2616### (automatically generated by 'make depend')
2617### Dependencies:
2618objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h \
2619 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2620 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2621 globals.h farsi.h arabic.h version.h
2622objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h \
2623 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2624 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2625 globals.h farsi.h arabic.h
2626objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2627 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2628 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2629 arabic.h
2630objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h \
2631 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2632 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2633 globals.h farsi.h arabic.h
2634objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2635 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2636 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2637 arabic.h
2638objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2639 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2640 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2641 arabic.h version.h
2642objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h \
2643 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2644 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2645 globals.h farsi.h arabic.h version.h
2646objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \
2647 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2648 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2649 globals.h farsi.h arabic.h version.h
2650objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \
2651 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2652 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2653 globals.h farsi.h arabic.h
2654objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h \
2655 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2656 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2657 globals.h farsi.h arabic.h
2658objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \
2659 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2660 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2661 globals.h farsi.h arabic.h
2662objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h \
2663 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2664 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2665 globals.h farsi.h arabic.h
2666objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2667 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2668 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2669 arabic.h
2670objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h \
2671 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2672 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2673 globals.h farsi.h arabic.h
Bram Moolenaar58d98232005-07-23 22:25:46 +00002674objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \
2675 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2676 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2677 globals.h farsi.h arabic.h
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00002678objects/hashtable.o: hashtable.c vim.h auto/config.h feature.h os_unix.h \
2679 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2680 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2681 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002682objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \
2683 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2684 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2685 globals.h farsi.h arabic.h if_cscope.h
2686objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \
2687 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2688 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2689 globals.h farsi.h arabic.h version.h
2690objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2691 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2692 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2693 arabic.h farsi.c arabic.c
2694objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2695 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2696 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2697 arabic.h
2698objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h \
2699 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2700 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2701 globals.h farsi.h arabic.h
2702objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h \
2703 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2704 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2705 globals.h farsi.h arabic.h
2706objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2707 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2708 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2709 arabic.h
2710objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h \
2711 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2712 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2713 globals.h farsi.h arabic.h
2714objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2715 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2716 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2717 arabic.h version.h
2718objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2719 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2720 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2721 arabic.h
2722objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2723 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2724 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2725 arabic.h
2726objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2727 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2728 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2729 arabic.h
2730objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h \
2731 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2732 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2733 globals.h farsi.h arabic.h
2734objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2735 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2736 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2737 arabic.h
2738objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h \
2739 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2740 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2741 globals.h farsi.h arabic.h
2742objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h \
2743 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2744 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2745 globals.h farsi.h arabic.h os_unixx.h
2746objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \
2747 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2748 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2749 globals.h farsi.h arabic.h
2750objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \
2751 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2752 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2753 globals.h farsi.h arabic.h
2754objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h \
2755 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2756 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2757 globals.h farsi.h arabic.h
2758objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h \
2759 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2760 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2761 globals.h farsi.h arabic.h
2762objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h \
2763 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2764 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2765 globals.h farsi.h arabic.h
Bram Moolenaar217ad922005-03-20 22:37:15 +00002766objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h \
2767 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2768 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2769 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002770objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h \
2771 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2772 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2773 globals.h farsi.h arabic.h
2774objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2775 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2776 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2777 arabic.h
2778objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2779 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2780 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2781 arabic.h
2782objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2783 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2784 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2785 arabic.h
2786objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2787 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2788 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2789 arabic.h
2790objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h \
2791 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2792 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2793 globals.h farsi.h arabic.h version.h
2794objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h \
2795 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2796 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2797 globals.h farsi.h arabic.h
2798objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2799 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2800 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2801 arabic.h
2802objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h \
2803 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \
2804 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \
2805 proto.h globals.h farsi.h arabic.h ../pixmaps/stock_icons.h
2806objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \
2807 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2808 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2809 globals.h farsi.h arabic.h gui_gtk_f.h
2810objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \
2811 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2812 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2813 globals.h farsi.h arabic.h ../pixmaps/alert.xpm ../pixmaps/error.xpm \
2814 ../pixmaps/generic.xpm ../pixmaps/info.xpm ../pixmaps/quest.xpm
2815objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \
2816 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2817 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2818 globals.h farsi.h arabic.h gui_at_sb.h
2819objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \
2820 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2821 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2822 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \
2823 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
2824objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h \
2825 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2826 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2827 globals.h farsi.h arabic.h ../runtime/vim32x32.xpm \
2828 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm ../pixmaps/tb_new.xpm \
2829 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \
2830 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \
2831 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2832 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2833 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2834 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2835 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2836 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2837 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2838 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2839 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2840 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2841 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2842 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2843 ../pixmaps/tb_minwidth.xpm
2844objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \
2845 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2846 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2847 globals.h farsi.h arabic.h gui_at_sb.h
2848objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \
2849 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2850 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2851 globals.h farsi.h arabic.h gui_at_sb.h
2852objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2853 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2854 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2855 arabic.h
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002856objects/gui_kde.o: gui_kde.cc gui_kde_wid.h kvim_iface.h vim.h \
Bram Moolenaar843ee412004-06-30 16:16:41 +00002857 auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \
2858 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \
2859 globals.h farsi.h
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002860objects/gui_kde_wid.o: gui_kde_wid.cc gui_kde_wid.h kvim_iface.h \
Bram Moolenaar843ee412004-06-30 16:16:41 +00002861 vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \
2862 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \
2863 globals.h farsi.h proto/../../pixmaps/alert.xpm proto/../../pixmaps/error.xpm \
2864 proto/../../pixmaps/generic.xpm proto/../../pixmaps/info.xpm \
2865 proto/../../pixmaps/quest.xpm
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002866objects/gui_kde_x11.o: gui_kde_x11.cc gui_kde_wid.h kvim_iface.h vim.h \
Bram Moolenaar843ee412004-06-30 16:16:41 +00002867 auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \
2868 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \
2869 globals.h farsi.h version.h ../runtime/vim32x32.xpm
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002870objects/gui_kde_wid_moc.o: gui_kde_wid_moc.cc gui_kde_wid.h \
Bram Moolenaar843ee412004-06-30 16:16:41 +00002871 kvim_iface.h vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2872 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h option.h \
2873 ex_cmds.h proto.h globals.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002874objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \
2875 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2876 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2877 globals.h farsi.h arabic.h
Bram Moolenaar325b7a22004-07-05 15:58:32 +00002878objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \
2879 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2880 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2881 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002882objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \
2883 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2884 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2885 globals.h farsi.h arabic.h
2886objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \
2887 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2888 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2889 globals.h farsi.h arabic.h
2890objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \
2891 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2892 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2893 globals.h farsi.h arabic.h
2894objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h \
2895 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2896 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2897 globals.h farsi.h arabic.h
2898objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h \
2899 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2900 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2901 globals.h farsi.h arabic.h version.h
2902objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \
2903 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2904 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2905 globals.h farsi.h arabic.h os_unixx.h
2906objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \
2907 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2908 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2909 globals.h farsi.h arabic.h
2910objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \
2911 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \
2912 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \
2913 proto.h globals.h farsi.h arabic.h version.h workshop.h
2914objects/wsdebug.o: wsdebug.c
2915objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \
2916 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2917 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2918 globals.h farsi.h arabic.h integration.h
2919objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \
2920 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2921 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2922 globals.h farsi.h arabic.h version.h