blob: f27e20d1ea23fc5816f9767579fc46a1f82f34bc [file] [log] [blame]
Bram Moolenaare1d12892004-06-13 13:02:36 +00001# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78
2#
3# This Makefile is loosely based on the GNU Makefile conventions found in
4# standards.info.
5#
6# Compiling Vim, summary:
7#
8# 3. make
9# 5. make install
10#
11# Compiling Vim, details:
12#
13# Edit this file for adjusting to your system. You should not need to edit any
14# other file for machine specific things!
15# The name of this file MUST be Makefile (note the uppercase 'M').
16#
17# 1. Edit this Makefile {{{1
18# The defaults for Vim should work on most machines, but you may want to
19# uncomment some lines or make other changes below to tune it to your
20# system, compiler or preferences. Uncommenting means that the '#' in
21# the first column of a line is removed.
22# - If you want a version of Vim that is small and starts up quickly,
23# you might want to disable the GUI, X11, Perl, Python and Tcl.
24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or
25# Athena but don't want to make gvim (the GUI version of Vim with nice
26# menus and scrollbars, but makes Vim bigger and startup slower).
27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a
28# Unix version.
29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
30# want to disable using X11 libraries. This speeds up starting Vim,
31# but the window title will not be set and the X11 selection can not
32# used.
33# - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the
34# X11 Session Management Protocol (XSMP) library (libSM) but do not
35# want to use it.
36# This can speedup Vim startup but Vim loses the ability to catch the
37# user logging out from session-managers like GNOME & KDE and work
38# could be lost.
39# - Uncomment one or more of these lines to include an interface;
40# each makes Vim quite a bit bigger:
41# --enable-perlinterp for Perl interpreter
42# --enable-pythoninterp for Python interpreter
43# --enable-rubyinterp for Ruby interpreter
44# --enable-tclinterp for Tcl interpreter
45# --enable-cscope for Cscope interface
46# - Uncomment one of the lines with --with-features= to enable a set of
47# features (but not the interfaces just mentioned).
48# - Uncomment the line with --disable-acl to disable ACL support even
49# though your system supports it.
50# - Uncomment the line with --disable-gpm to disable gpm support
51# even though you have gpm libraries and includes
52# - Uncomment one of the lines with CFLAGS and/or CC if you have
53# something very special or want to tune the optimizer.
54# - Search for the name of your system to see if it needs anything
55# special.
56# - A few versions of make use '.include "file"' instead of 'include
57# file'. Adjust the include line below if yours does.
58#
59# 2. Edit feature.h {{{1
60# Only if you do not agree with the default compile features, e.g.:
61# - you want Vim to be as vi compatible as it can be
62# - you want to use Emacs tags files
63# - you want right-to-left editing (Hebrew)
64# - you want 'langmap' support (Greek)
65# - you want to remove features to make Vim smaller
66#
67# 3. "make" {{{1
68# Will first run ./configure with the options in this file. Then it will
69# start make again on this Makefile to do the compiling. You can also do
70# this in two steps with:
71# make config
72# make
73# The configuration phase creates/overwrites auto/config.h and
74# auto/config.mk.
75# The configure script is created with "make autoconf". It can detect
76# different features of your system and act accordingly. However, it is
77# not correct for all systems. Check this:
78# - If you have X windows, but configure could not find it or reported
79# another include/library directory then you wanted to use, you have
80# to set CONF_OPT_X below. You might also check the installation of
81# xmkmf.
82# - If you have --enable-gui=motif and have Motif on your system, but
83# configure reports "checking for location of gui... <not found>", you
84# have to set GUI_INC_LOC and GUI_LIB_LOC below.
85# If you changed something, do this to run configure again:
86# make reconfig
87#
88# - If you do not trust the automatic configuration code, then inspect
89# auto/config.h and auto/config.mk, before starting the actual build
90# phase. If possible edit this Makefile, rather than auto/config.mk --
91# especially look at the definition of VIMLOC below. Note that the
92# configure phase overwrites auto/config.mk and auto/config.h again.
93# - If you get error messages, find out what is wrong and try to correct
94# it in this Makefile. You may need to do "make reconfig" when you
95# change anything that configure uses (e.g. switching from an old C
96# compiler to an ANSI C compiler). Only when auto/configure does
97# something wrong you may need to change one of the other files. If
98# you find a clean way to fix the problem, consider sending a note to
99# the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim
100# (Bram@vim.org). Don't bother to do that when you made a hack
101# solution for a non-standard system.
102#
103# 4. "make test" {{{1
104# This is optional. This will run Vim scripts on a number of test
105# files, and compare the produced output with the expected output.
106# If all is well, you will get the "ALL DONE" message in the end. See
107# below (search for "/^test").
108#
109# 5. "make install" {{{1
110# If the new Vim seems to be working OK you can install it and the
111# documentation in the appropriate location. The default is
112# "/usr/local". Change "prefix" below to change the location.
113# "auto/pathdef.c" will be compiled again after changing this to make
114# the executable know where the help files are located.
115# Note that any existing executable is removed or overwritten. If you
116# want to keep it you will have to make a backup copy first.
117# The runtime files are in a different directory for each version. You
118# might want to delete an older version.
119# If you don't want to install everything, there are other targets:
120# make installvim only installs Vim, not the tools
121# make installvimbin only installs the Vim executable
122# make installruntime only installs the Vim help and
123# runtime files
124# make installlinks only installs the Vim binary links
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +0000125# make installmanlinks only installs the Vim manpage links
Bram Moolenaare1d12892004-06-13 13:02:36 +0000126# make installmacros only installs the Vim macros
127# make installtutor only installs the Vim tutor
Bram Moolenaar217ad922005-03-20 22:37:15 +0000128# make installspell only installs the spell files
Bram Moolenaare1d12892004-06-13 13:02:36 +0000129# make installtools only installs xxd
130# If you install Vim, not to install for real but to prepare a package
131# or RPM, set DESTDIR to the root of the tree.
132#
133# 6. Use Vim until a new version comes out. {{{1
134#
135# 7. "make uninstall_runtime" {{{1
136# Will remove the runtime files for the current version. This is safe
137# to use while another version is being used, only version-specific
138# files will be deleted.
139# To remove the runtime files of another version:
140# make uninstall_runtime VIMRTDIR=/vim54
141# If you want to delete all installed files, use:
142# make uninstall
143# Note that this will delete files that have the same name for any
144# version, thus you might need to do a "make install" soon after this.
145# Be careful not to remove a version of Vim that is still being used!
146# To find out which files and directories will be deleted, use:
147# make -n uninstall
148# }}}
149#
150### This Makefile has been succesfully tested on many systems. {{{
151### Only the ones that require special options are mentioned here.
152### Check the (*) column for remarks, listed below.
153### Later code changes may cause small problems, otherwise Vim is supposed to
154### compile and run without problems.
155
156#system: configurations: version (*) tested by:
157#------------- ------------------------ ------- - ----------
158#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash
159#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn
160#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker
161#AIX 4.2.1 cc 5.2k (C) Will Fiveash
162#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor
163#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski
164#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert
165#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus
166#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus
167#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard
168#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein
169#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive
170#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar
171#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao
172#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor
173#Irix 6.4 cc ? 5.0m (S) Rick Sayre
174#Irix 6.5 cc ? 6.0 (S) David Harrison
175#Irix 64 bit 4.5 (K) Jon Wright
176#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman
177#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert
178#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
179#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn
180#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz
181#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert
182#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers
183#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick
184#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum
185#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro
186#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter
187#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
188#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn
189#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer
190#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman
191#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber
192#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon
193#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large
194#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann
195#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo
196#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden
197#Solaris with -lthread 5.5 (W) K. Nagano
198#Solaris gcc (b) Riccardo
199#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar
200#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert
201#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz
202#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro
203#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst
204#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar
205# }}}
206
207# (*) Remarks: {{{
208#
209# (1) Uncomment line below for shlicc2
210# (2) HPUX with compile problems or wrong digraphs, uncomment line below
211# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.
212# And add "-lXpm" to MOTIF_LIBS2.
213# (4) For cc the optimizer must be disabled (use CFLAGS= after running
214# configure) (symptom: ":set termcap" output looks weird).
215# (5) Compiler may need extra argument, see below.
216# (6) See below for a few lines to uncomment
217# (7) See below for lines which enable the use of clcc
218# (8) Needs some EXTRA_LIBS, search for Unisys below
219# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below.
220# (A) May need EXTRA_LIBS, see below
221# (B) Can't compile GUI because there is no waitpid()... Disable GUI below.
222# (C) Force the use of curses instead of termcap, see below.
223# (D) Uncomment lines below for QNX
224# (E) You might want to use termlib instead of termcap, see below.
225# (F) See below for instructions.
226# (G) Using ncursus version 4.2 has reported to cause a crash. Use the
227# Sun cursus library instead.
228# (H) See line for EXTRA_LIBS below.
229# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix.
230# (J) If you get undefined symbols, see below for a solution.
231# (K) See lines to uncomment below for machines with 64 bit pointers.
232# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk
233# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two
234# characters instead of one).
235# (N) SCO with decmouse.
236# (O) LynxOS needs EXTRA_LIBS, see below.
237# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.
238# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.
239# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.
240# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below.
241# (T) See ../doc/os_beos.txt.
242# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python
243# detection, since the configure script runs into an error when it
244# detects Python (probably because of the bash shell).
245# (V) See lines to uncomment below.
246# (X) Need to use the .include "auto/config.mk" line below
247# (Y) See line with c89 below
248# (Z) See lines with cc or c89 below
249# (a) See line with EXTRA_LIBS below.
250# (b) When using gcc with the Solaris linker, make sure you don't use GNU
251# strip, otherwise the binary may not run: "Cannot find ELF".
252# (x) When you get warnings for precompiled header files, run
253# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below.
254# }}}
255
256
257#DO NOT CHANGE the next line, we need it for configure to find the compiler
258#instead of using the default from the "make" program.
259#Use a line further down to change the value for CC.
260CC=
261
262# Change and use these defines if configure cannot find your Motif stuff.
263# Unfortunately there is no "standard" location for Motif. {{{
264# These defines can contain a single directory (recommended) or a list of
265# directories (for when you are working with several systems). The LAST
266# directory that exists is used.
267# When changed, run "make reconfig" next!
268#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2
269#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2
270### Use these two lines for Infomagic Motif (3)
271#GUI_INC_LOC = -I/usr/X11R6/include
272#GUI_LIB_LOC = -L/usr/X11R6/lib
273# }}}
274
275######################## auto/config.mk ######################## {{{1
276# At this position auto/config.mk is included. When starting from the
277# distribution it is almost empty. After running auto/configure it contains
278# settings that have been discovered for your system. Settings below this
279# include override settings in auto/config.mk!
280
281# Note: if auto/config.mk is lost somehow (e.g., because configure was
282# interrupted), create an empty auto/config.mk file and do "make config".
283
284# (X) How to include auto/config.mk depends on the version of "make" you have,
285# if the current choice doesn't work, try the other one.
286
287include auto/config.mk
288#.include "auto/config.mk"
289CClink = $(CC)
290
291#}}}
292
293# Include the configuration choices first, so we can override everything
294# below. As shipped, this file contains a target that causes to run
295# configure. Once configure was run, this file contains a list of
296# make variables with predefined values instead. Thus any second invocation
297# of make, will buid Vim.
298
299# CONFIGURE - configure arguments {{{1
300# You can give a lot of options to configure.
301# Change this to your desire and do 'make config' afterwards
302
303# examples (can only use one!):
304#CONF_ARGS = --exec-prefix=/usr
305#CONF_ARGS = --with-vim-name=vim6 --with-ex-name=ex6 --with-view-name=view6
306#CONF_ARGS = --with-global-runtime=/etc/vim
307
308# Use this one if you distribute a modified version of Vim.
309#CONF_ARGS = --with-modified-by="John Doe"
310
311# GUI - For creating Vim with GUI (gvim) (B)
312# Uncomment this line when you don't want to get the GUI version, although you
313# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11
314# at all.
315#CONF_OPT_GUI = --disable-gui
316
317# Uncomment one of these lines if you have that GUI but don't want to use it.
318# The automatic check will use another one that can be found
319# Gnome is disabled by default, it may cause trouble.
320#CONF_OPT_GUI = --disable-gtk-check
321#CONF_OPT_GUI = --disable-gtk2-check
322#CONF_OPT_GUI = --enable-gnome-check
323#CONF_OPT_GUI = --enable-gnome2-check
324#CONF_OPT_GUI = --disable-motif-check
325#CONF_OPT_GUI = --disable-athena-check
326#CONF_OPT_GUI = --disable-nextaw-check
327
328# Uncomment one of these lines to select a specific GUI to use.
329# When using "yes" or nothing, configure will use the first one found: GTK+,
330# Motif or Athena.
331#
332# GTK versions that are known not to work 100% are rejected.
333# Use "--disable-gtktest" to accept them anyway.
334#
335# GNOME means GTK with Gnome support. If using GTK, then GNOME will
336# automatically be used if it is found. If you have GNOME, but do not want to
337# use it (e.g., want a GTK-only version), then use --enable-gui=gtk.
338#
Bram Moolenaar81695252004-12-29 20:58:21 +0000339# KDE doesn't fully work, unfortunately. See the todo list.
340#
Bram Moolenaare1d12892004-06-13 13:02:36 +0000341# If the selected GUI isn't found, the GUI is disabled automatically
342#CONF_OPT_GUI = --enable-gui=gtk
343#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
344#CONF_OPT_GUI = --enable-gui=gtk2
345#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest
346#CONF_OPT_GUI = --enable-gui=gnome
347#CONF_OPT_GUI = --enable-gui=gnome2
348#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest
Bram Moolenaarcfbc5ee2004-07-02 15:38:35 +0000349#CONF_OPT_GUI = --enable-gui=kde
Bram Moolenaare1d12892004-06-13 13:02:36 +0000350#CONF_OPT_GUI = --enable-gui=motif
351#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"
352#CONF_OPT_GUI = --enable-gui=athena
353#CONF_OPT_GUI = --enable-gui=nextaw
354
355# DARWIN - detecting Mac OS X
356# Uncomment this line when you want to compile a Unix version of Vim on
357# Darwin. None of the Mac specific options or files will be used.
358#CONF_OPT_DARWIN = --disable-darwin
359
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000360# PERL
Bram Moolenaare1d12892004-06-13 13:02:36 +0000361# Uncomment this when you want to include the Perl interface.
362# The Perl option sometimes causes problems, because it adds extra flags
363# to the command line. If you see strange flags during compilation, check in
364# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting
365# the next line.
366# When you get an error for a missing "perl.exp" file, try creating an emtpy
367# one: "touch perl.exp".
368# This requires at least "small" features, "tiny" doesn't work.
369#CONF_OPT_PERL = --enable-perlinterp
370
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000371# PYTHON
Bram Moolenaare1d12892004-06-13 13:02:36 +0000372# Uncomment this when you want to include the Python interface.
Bram Moolenaar0e21a3f2005-04-17 20:28:32 +0000373# NOTE: This may cause threading to be enabled, which has side effects (such
374# as using different libraries and debugging becomes more difficult).
Bram Moolenaare1d12892004-06-13 13:02:36 +0000375#CONF_OPT_PYTHON = --enable-pythoninterp
376
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000377# TCL
Bram Moolenaare1d12892004-06-13 13:02:36 +0000378# Uncomment this when you want to include the Tcl interface.
379#CONF_OPT_TCL = --enable-tclinterp
380
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000381# RUBY
Bram Moolenaare1d12892004-06-13 13:02:36 +0000382# Uncomment this when you want to include the Ruby interface.
383#CONF_OPT_RUBY = --enable-rubyinterp
384
Bram Moolenaar325b7a22004-07-05 15:58:32 +0000385# MZSCHEME
386# Uncomment this when you want to include the MzScheme interface.
387#CONF_OPT_MZSCHEME = --enable-mzschemeinterp
388# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works
389#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt
390#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme
391#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz
392
393# CSCOPE
Bram Moolenaare1d12892004-06-13 13:02:36 +0000394# Uncomment this when you want to include the Cscope interface.
395#CONF_OPT_CSCOPE = --enable-cscope
396
397# WORKSHOP - Sun Visual Workshop interface. Only works with Motif!
398#CONF_OPT_WORKSHOP = --enable-workshop
399
400# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.
401# Motif version must have XPM libraries (see |workshop-xpm|).
402# Uncomment this when you do not want the netbeans interface.
403#CONF_OPT_NETBEANS = --disable-netbeans
404
405# SNIFF - Include support for SNiFF+.
406#CONF_OPT_SNIFF = --enable-sniff
407
408# MULTIBYTE - To edit multi-byte characters.
409# Uncomment this when you want to edit a multibyte language.
410# It's automatically enabled with big features or IME support.
411# Note: Compile on a machine where setlocale() actually works, otherwise the
412# configure tests may fail.
413#CONF_OPT_MULTIBYTE = --enable-multibyte
414
415# NLS - National Language Support
416# Uncomment this when you do not want to support translated messages, even
417# though configure can find support for it.
418#CONF_OPT_NLS = --disable-nls
419
420# XIM - X Input Method. Special character input support for X11 (chinese,
421# japanese, special symbols, etc). Also needed for dead-key support.
422# When omitted it's automatically enabled for the X-windows GUI.
423# HANGUL - Input Hangul (korean) language using internal routines.
424# Uncomment one of these when you want to input a multibyte language.
425#CONF_OPT_INPUT = --enable-xim
426#CONF_OPT_INPUT = --disable-xim
427#CONF_OPT_INPUT = --enable-hangulinput
428
429# FONTSET - X fontset support for output of languages with many characters.
430# Uncomment this when you want to output a multibyte language.
431#CONF_OPT_OUTPUT = --enable-fontset
432
433# ACL - Uncomment this when you do not want to include ACL support, even
434# though your system does support it. E.g., when it's buggy.
435#CONF_OPT_ACL = --disable-acl
436
437# gpm - For mouse support on Linux console via gpm
438# Uncomment this when you do not want to include gpm support, even
439# though you have gpm libraries and includes
440#CONF_OPT_GPM = --disable-gpm
441
442# FEATURES - For creating Vim with more or less features
443# Uncomment one of these lines when you want to include few to many features.
444# The default is "normal".
445#CONF_OPT_FEAT = --with-features=tiny
446#CONF_OPT_FEAT = --with-features=small
447#CONF_OPT_FEAT = --with-features=normal
448#CONF_OPT_FEAT = --with-features=big
Bram Moolenaar69a7cb42004-06-20 12:51:53 +0000449#CONF_OPT_FEAT = --with-features=huge
Bram Moolenaare1d12892004-06-13 13:02:36 +0000450
451# COMPILED BY - For including a specific e-mail address for ":version".
452#CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"
453
454# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies
455# (otherwise Vim configure will try to include xterm titlebar access)
456# Also disable the GUI above, otherwise it will be included anyway.
457# When both GUI and X11 have been disabled this may save about 15% of the
458# code and make Vim startup quicker.
459#CONF_OPT_X = --without-x
460
461# X WINDOWS DIRECTORY - specify X directories
462# If configure can't find you X stuff, or if you have multiple X11 derivates
463# installed, you may wish to specify which one to use.
464# Select nothing to let configure choose.
465# This here selects openwin (as found on sun).
466#XROOT = /usr/openwin
467#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib
468
469# X11 Session Management Protocol support
470# Vim will try to use XSMP to catch the user logging out if there are unsaved
471# files. Uncomment this line to disable that (it prevents vim trying to open
472# communications with the session manager).
473#CONF_OPT_XSMP = --disable-xsmp
474
475# You may wish to include xsmp but use exclude xsmp-interact if the logout
476# XSMP functionality does not work well with your session-manager (at time of
477# writing, this would be early GNOME-1 gnome-session: it 'freezes' other
478# applications after Vim has cancelled a logout (until Vim quits). This
479# *might* be the Vim code, but is more likely a bug in early GNOME-1.
480# This disables the dialog that asks you if you want to save files or not.
481#CONF_OPT_XSMP = --disable-xsmp-interact
482
483# COMPILER - Name of the compiler {{{1
484# The default from configure will mostly be fine, no need to change this, just
485# an example. If a compiler is defined here, configure will use it rather than
486# probing for one. It is dangerous to change this after configure was run.
487# Make will use your choice then -- but beware: Many things may change with
488# another compiler. It is wise to run 'make reconfig' to start all over
489# again.
490#CC = cc
491#CC = gcc
492
493# COMPILER FLAGS - change as you please. Either before running {{{1
494# configure or afterwards. For examples see below.
495# When using -g with some older versions of Linux you might get a
496# statically linked executable.
497# When not defined, configure will try to use -O2 -g for gcc and -O for cc.
498#CFLAGS = -g
499#CFLAGS = -O
500
501# Optimization limits - depends on the compiler. Automatic check in configure
502# doesn't work very well, because many compilers only give a warning for
503# unrecognized arguments.
504#CFLAGS = -O -OPT:Olimit=2600
505#CFLAGS = -O -Olimit 2000
506#CFLAGS = -O -FOlimit,2000
507
508# Often used for GCC: mixed optimizing, lot of optimizing, debugging
509#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
Bram Moolenaar69a7cb42004-06-20 12:51:53 +0000510#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes
Bram Moolenaardf177f62005-02-22 08:39:57 +0000511#CFLAGS = -g -Wall -Wmissing-prototypes
Bram Moolenaare1d12892004-06-13 13:02:36 +0000512#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
513#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes
Bram Moolenaar592e0a22004-07-03 16:05:59 +0000514#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
Bram Moolenaare1d12892004-06-13 13:02:36 +0000515
516# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond
517# allocated memory (and makes every malloc()/free() very slow).
518# Electric Fence is free (search ftp sites).
519# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this
520# as root: sysctl -w vm.max_proc_mmap=30000
521#EXTRA_LIBS = /usr/local/lib/libefence.a
522
523# PURIFY - remove the # to use the "purify" program (hoi Nia++!)
524#PURIFY = purify
525# }}}
526
527# LINT - for running lint
528LINT_OPTIONS = -beprxzF
529
530# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.
531# Might not work with GUI or Perl.
532# Need to recompile everything after changing this: "make clean" "make".
533#PROFILE_CFLAGS = -pg -g
534#PROFILE_LIBS = -pg
535
536#####################################################
537### Specific systems, check if yours is listed! ### {{{
538#####################################################
539
540### Uncomment things here only if the values chosen by configure are wrong.
541### It's better to adjust configure.in and "make autoconf", if you can!
542### Then send the required changes to configure.in to the bugs list.
543
544### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries
545###
546#CC = shlicc2
547#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin
548
549### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler
550### The first probably works on all systems
551### The second should work a bit better on newer systems
552### The third should work a bit better on HPUX 11.11
553### Information provided by: Richard Allen <ra@rhi.hi.is>
554#CC = c89 -D_HPUX_SOURCE
555#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE
556#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE
557
558### (2) For HP-UX: Enable the use of a different set of digraphs. Use this
559### when the default (ISO) digraphs look completely wrong.
560### After changing this do "touch digraph.c; make".
561#EXTRA_DEFS = -DHPUX_DIGRAPHS
562
563### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes
564### is too small to compile many routines. It produces too much defining
565### and no space errors.
566### Uncomment the following to specify a larger macro definition table.
567#CFLAGS = -Wp,-H256000
568
569### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with
570### libraries in /usr/lib instead of /lib (avoiding transition links).
571### Information provided by: David Green
572#XROOT = /usr
573#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6
574#GUI_INC_LOC = -I/usr/include/Motif1.2
575#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6
576
577### (5) AIX 4.1.4 with cc
578#CFLAGS = -O -qmaxmem=8192
579
580### AIX with c89 (Walter Briscoe)
581#CC = c89
582#CPPFLAGS = -D_ALL_SOURCE
583
584### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)
585# needed to avoid a problem where strings.h gets included
586#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__
587
588### (W) Solaris with multi-threaded libraries (-lthread):
589### If suspending doesn't work properly, try using this line:
590#EXTRA_DEFS = -D_REENTRANT
591
592### (7) Solaris 2.4/2.5 with Centerline compiler
593#CC = clcc
594#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
595#CFLAGS = -O
596
597### (9) Solaris 2.x with cc (SunPro), using Athena.
598### Only required for compiling gui_at_sb.c.
599### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb"
600### Use one of the lines (either Full ANSI or no ANSI at all)
601#CFLAGS = $(CFLAGS) -Xc
602#CFLAGS = $(CFLAGS) -Xs
603
604### Solaris 2.3 with X11 and specific cc
605#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib
606
607### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")
608#CC = /usr/ucb/cc
609#EXTRA_LIBS = -R/usr/ucblib
610
611### Solaris with Forte Developer and FEAT_SUN_WORKSHOP
612# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.
613#CC = cc
614#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris
615#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm
616#XPM_IPATH = -I$(XPM_DIR)/include
617#EXTRA_LIBS = $(XPM_LIB)
618#EXTRA_IPATHS = $(XPM_IPATH)
619#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H
620
621### Solaris with workshop compilers: Vim is unstable when compiled with
622# "-fast". Use this instead. (Shea Martin)
623#CFLAGS = -x02 -xtarget=ultra
624
625### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:
626#LDFLAGS = -lw -ldl -lXmu
627#GUI_LIB_LOC = -L/usr/local/lib
628
629### (8) Unisys 6035 (Glauber Ribeiro)
630#EXTRA_LIBS = -lnsl -lsocket -lgen
631
632### When builtin functions cause problems with gcc (for Sun 4.1.x)
633#CFLAGS = -O2 -Wall -traditional -Wno-implicit
634
635### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
636#EXTRA_DEFS = -DDOMAIN
637#CFLAGS= -O -A systype,bsd4.3
638
639### Coherent 4.2.10 on Intel 386 platform
640#EXTRA_DEFS = -Dvoid=int
641#EXTRA_LIBS = -lterm -lsocket
642
643### SCO 3.2, with different library name for terminfo
644#EXTRA_LIBS = -ltinfo
645
646### UTS2 for Amdahl UTS 2.1.x
647#EXTRA_DEFS = -DUTS2
648#EXTRA_LIBS = -lsocket
649
650### UTS4 for Amdahl UTS 4.x
651#EXTRA_DEFS = -DUTS4 -Xa
652
653### USL for Unix Systems Laboratories (SYSV 4.2)
654#EXTRA_DEFS = -DUSL
655
656### RISCos on MIPS without X11
657#EXTRA_DEFS = -DMIPS
658
659### RISCos on MIPS with X11
660#EXTRA_LIBS = -lsun
661
662### (6) A/UX 3.1.1 with gcc (Jim Jagielski)
663#CC= gcc -D_POSIX_SOURCE
664#CFLAGS= -O2
665#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11
666
667### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)
668### Also use the CONF_TERM_LIB below!
669#EXTRA_LIBS = -lgen
670
671### (D) QNX (by G.F. Desrochers)
672#CFLAGS = -g -O -mf -4
673
674### (F) QNX (by John Oleynick)
675# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment
676# CONF_OPT_X = --without-x.
677# 2. make config
678# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't
679# have -ldir (does config find it somewhere?) and -ltermcap has at
680# least one problem so I use termlib.o instead. The problem with
681# termcap is that it segfaults if you call it with the name of
682# a non-existent terminal type.
683# 4. edit auto/config.h and add #define USE_TMPNAM
684# 5. add termlib.o to OBJ
685# 6. make
686
687### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)
688#EXTRA_LIBS = -lgen
689
690### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)
691#EXTRA_LIBS = -lgen -lnsl
692### For SINIX-Y this is needed for the right prototype of gettimeofday()
693#EXTRA_DEFS = -D_XPG_IV
694
695### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc
696# Use both "-F O3" lines for optimization or the "-g" line for debugging
697#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE
698#CFLAGS = -F O3 -DSINIXN
699#LDFLAGS = -F O3
700#CFLAGS = -g -DSINIXN
701
702### (P) SCO 3.2.42, with different termcap names for some useful keys DJB
703#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY
704#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s
705
706### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz)
707#GUI_INC_LOC = -I/usr/include
708#GUI_LIB_LOC = -L/usr/lib
709#EXTRA_LIBS = -lgen
710
711### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)
712#GUI_INC_LOC = -I/usr/necccs/include
713#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6
714#XROOT = /usr/necccs
715#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6
716#EXTRA_LIBS = -lsocket -lgen
717
718### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
719# Not needed for Irix 5.3, Ives Aerts reported
720#EXTRA_LIBS = -lmalloc -lc_s
721# Irix 4.0, when regexp and regcmp cannot be found when linking:
722#EXTRA_LIBS = -lmalloc -lc_s -lPW
723
724### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag:
725# Note: This newer option style is used with the MipsPro compilers ONLY if
726# you are compiling an "n32" or "64" ABI binary (use either a -n32
727# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag,
728# then the CFLAGS option format will be the typical style (i.e.
729# -Olimit 3000).
730#CFLAGS = -OPT:Olimit=3000 -O
731
732### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new
733# compiler features! Beware, the optimization is EXTREMELY thorough
734# and takes quite a long time.
735# Note: See the note above. Here, the -mips3 option automatically
736# enables either the "n32" or "64" ABI, depending on what machine you
737# are compiling on (n32 is explicitly enabled here, just to make sure).
738#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
739#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
740
741### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64)
742### Suggested by Jon Wright <jon@gate.sinica.edu.tw>.
743### Tested on R8000 IRIX6.1 Power Indigo2.
744### Check /etc/compiler.defaults for your compiler settings.
745# either (for 64 bit pointers) uncomment the following line
746#GUI_LIB_LOC = -L/usr/lib64
747# then
748# 1) make config
749# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line
750# 3) make
751#
752# or (for 32bit pointers) uncomment the following line
753#EXTRA_DEFS = -n32
754#GUI_LIB_LOC = -L/usr/lib32
755# then
756# 1) make config
757# 2) edit auto/config.mk, add -n32 to LDFLAGS
758# 3) make
759###
760
761### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library,
762### which is found by configure, doesn't work correctly. Symptom is the
763### error message "Termcap entry too long". Uncomment the next line.
764### On AIX 4.2.1 (and other versions probably), libtermcap is reported
765### not to display properly.
766### after changing this, you need to do "make reconfig".
767#CONF_TERM_LIB = --with-tlib=curses
768
769### (E) If you want to use termlib library instead of the automatically found
770### one. After changing this, you need to do "make reconfig".
771#CONF_TERM_LIB = --with-tlib=termlib
772
773### (a) ESIX V4.2 (Reinhard Wobst)
774#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext
775
776### If you want to use ncurses library instead of the automatically found one
777### after changing this, you need to do "make reconfig".
778#CONF_TERM_LIB = --with-tlib=ncurses
779
780### For GCC on MSDOS, the ".exe" suffix will be added.
781#EXEEXT = .exe
782#LNKEXT = .exe
783
784### (O) For LynxOS 2.5.0, tested on PC.
785#EXTRA_LIBS = -lXext -lSM -lICE -lbsd
786### For LynxOS 3.0.1, tested on PPC
787#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11
788### For LynxOS 3.1.0, tested on PC
789#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu
790
791
792### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove
793### -Qtarget if only in a 5800 environment. (Kipp E. Howard)
794#CFLAGS = -O -Qtarget=m88110compat
795#EXTRA_LIBS = -lgen
796
797##################### end of system specific lines ################### }}}
798
799### Names of the programs and targets {{{1
800VIMTARGET = $(VIMNAME)$(EXEEXT)
801EXTARGET = $(EXNAME)$(LNKEXT)
802VIEWTARGET = $(VIEWNAME)$(LNKEXT)
803GVIMNAME = g$(VIMNAME)
804GVIMTARGET = $(GVIMNAME)$(LNKEXT)
805GVIEWNAME = g$(VIEWNAME)
806GVIEWTARGET = $(GVIEWNAME)$(LNKEXT)
807RVIMNAME = r$(VIMNAME)
808RVIMTARGET = $(RVIMNAME)$(LNKEXT)
809RVIEWNAME = r$(VIEWNAME)
810RVIEWTARGET = $(RVIEWNAME)$(LNKEXT)
811RGVIMNAME = r$(GVIMNAME)
812RGVIMTARGET = $(RGVIMNAME)$(LNKEXT)
813RGVIEWNAME = r$(GVIEWNAME)
814RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT)
815VIMDIFFNAME = $(VIMNAME)diff
816GVIMDIFFNAME = g$(VIMDIFFNAME)
817VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT)
818GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT)
819EVIMNAME = e$(VIMNAME)
820EVIMTARGET = $(EVIMNAME)$(LNKEXT)
821EVIEWNAME = e$(VIEWNAME)
822EVIEWTARGET = $(EVIEWNAME)$(LNKEXT)
823
824### Names of the tools that are also made {{{1
825TOOLS = xxd/xxd$(EXEEXT)
826
827### Installation directories. The defaults come from configure. {{{1
828#
829### prefix the top directory for the data (default "/usr/local")
830#
831# Uncomment the next line to install Vim in your home directory.
832#prefix = $(HOME)
833
834### exec_prefix is the top directory for the executable (default $(prefix))
835#
836# Uncomment the next line to install the Vim executable in "/usr/machine/bin"
837#exec_prefix = /usr/machine
838
839### BINDIR dir for the executable (default "$(exec_prefix)/bin")
840### MANDIR dir for the manual pages (default "$(prefix)/man")
841### DATADIR dir for the other files (default "$(prefix)/lib" or
842# "$(prefix)/share")
843# They may be different when using different architectures for the
844# executable and a common directory for the other files.
845#
846# Uncomment the next line to install Vim in "/usr/bin"
847#BINDIR = /usr/bin
848# Uncomment the next line to install Vim manuals in "/usr/share/man/man1"
849#MANDIR = /usr/share/man
850# Uncomment the next line to install Vim help files in "/usr/share/vim"
851#DATADIR = /usr/share
852
853### DESTDIR root of the installation tree. This is prepended to the other
854# directories. This directory must exist.
855#DESTDIR = ~/pkg/vim
856
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +0000857### Directory of the man pages
858MAN1DIR = /man1
Bram Moolenaare1d12892004-06-13 13:02:36 +0000859
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +0000860### Vim version (adjusted by a script)
861VIMMAJOR = 7
862VIMMINOR = 0aa
863
Bram Moolenaare1d12892004-06-13 13:02:36 +0000864### Location of Vim files (should not need to be changed, and {{{1
865### some things might not work when they are changed!)
866VIMDIR = /vim
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +0000867VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +0000868HELPSUBDIR = /doc
869COLSUBDIR = /colors
870SYNSUBDIR = /syntax
871INDSUBDIR = /indent
872PLUGSUBDIR = /plugin
873FTPLUGSUBDIR = /ftplugin
874LANGSUBDIR = /lang
875COMPSUBDIR = /compiler
876KMAPSUBDIR = /keymap
877MACROSUBDIR = /macros
878TOOLSSUBDIR = /tools
879TUTORSUBDIR = /tutor
Bram Moolenaar217ad922005-03-20 22:37:15 +0000880SPELLSUBDIR = /spell
Bram Moolenaare1d12892004-06-13 13:02:36 +0000881PRINTSUBDIR = /print
882PODIR = po
883
884### VIMLOC common root of the Vim files (all versions)
885### VIMRTLOC common root of the runtime Vim files (this version)
886### VIMRCLOC compiled-in location for global [g]vimrc files (all versions)
887### VIMRUNTIMEDIR compiled-in location for runtime files (optional)
888### HELPSUBLOC location for help files
889### COLSUBLOC location for colorscheme files
890### SYNSUBLOC location for syntax files
891### INDSUBLOC location for indent files
892### PLUGSUBLOC location for standard plugin files
893### FTPLUGSUBLOC location for ftplugin files
894### LANGSUBLOC location for language files
895### COMPSUBLOC location for compiler files
896### KMAPSUBLOC location for keymap files
897### MACROSUBLOC location for macro files
898### TOOLSSUBLOC location for tools files
899### TUTORSUBLOC location for tutor files
Bram Moolenaar217ad922005-03-20 22:37:15 +0000900### SPELLSUBLOC location for spell files
Bram Moolenaare1d12892004-06-13 13:02:36 +0000901### PRINTSUBLOC location for PostScript files (prolog, latin1, ..)
902### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..)
903### You can override these if you want to install them somewhere else.
904### Edit feature.h for compile-time settings.
905VIMLOC = $(DATADIR)$(VIMDIR)
906VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR)
907VIMRCLOC = $(VIMLOC)
908HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR)
909COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR)
910SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR)
911INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR)
912PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR)
913FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR)
914LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR)
915COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR)
916KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR)
917MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR)
918TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR)
919TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR)
Bram Moolenaar217ad922005-03-20 22:37:15 +0000920SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +0000921PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR)
922SCRIPTLOC = $(VIMRTLOC)
923
924### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and
925### the runtime directory is not below it.
926#VIMRUNTIMEDIR = $(VIMRTLOC)
927
928### Name of the evim file target.
929EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim
930MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim
931
932### Name of the menu file target.
933SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim
934SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim
935SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim
936
937### Name of the bugreport file target.
938SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim
939
940### Name of the file type detection file target.
941SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim
942
943### Name of the file type detection file target.
944SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim
945
946### Name of the file type detection script file target.
947SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim
948
949### Name of the ftplugin-on file target.
950SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim
951
952### Name of the ftplugin-off file target.
953SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim
954
955### Name of the indent-on file target.
956SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim
957
958### Name of the indent-off file target.
959SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim
960
961### Name of the option window script file target.
962SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim
963
964# Program to install the program in the target directory. Could also be "mv".
965INSTALL_PROG = cp
966
967# Program to install the data in the target directory. Cannot be "mv"!
968INSTALL_DATA = cp
969INSTALL_DATA_R = cp -r
970
971### Program to run on installed binary
972#STRIP = strip
973
974### Permissions for binaries {{{1
975BINMOD = 755
976
977### Permissions for man page
978MANMOD = 644
979
980### Permissions for help files
981HELPMOD = 644
982
983### Permissions for Perl and shell scripts
984SCRIPTMOD = 755
985
986### Permission for Vim script files (menu.vim, bugreport.vim, ..)
987VIMSCRIPTMOD = 644
988
989### Permissions for all directories that are created
990DIRMOD = 755
991
992### Permissions for all other files that are created
993FILEMOD = 644
994
995# Where to copy the man and help files from
996HELPSOURCE = ../runtime/doc
997
998# Where to copy the script files from (menu, bugreport)
999SCRIPTSOURCE = ../runtime
1000
1001# Where to copy the colorscheme files from
1002COLSOURCE = ../runtime/colors
1003
1004# Where to copy the syntax files from
1005SYNSOURCE = ../runtime/syntax
1006
1007# Where to copy the indent files from
1008INDSOURCE = ../runtime/indent
1009
1010# Where to copy the standard plugin files from
1011PLUGSOURCE = ../runtime/plugin
1012
1013# Where to copy the ftplugin files from
1014FTPLUGSOURCE = ../runtime/ftplugin
1015
1016# Where to copy the macro files from
1017MACROSOURCE = ../runtime/macros
1018
1019# Where to copy the tools files from
1020TOOLSSOURCE = ../runtime/tools
1021
1022# Where to copy the tutor files from
1023TUTORSOURCE = ../runtime/tutor
1024
Bram Moolenaar217ad922005-03-20 22:37:15 +00001025# Where to copy the spell files from
1026SPELLSOURCE = ../runtime/spell
1027
Bram Moolenaare1d12892004-06-13 13:02:36 +00001028# Where to look for language specific files
1029LANGSOURCE = ../runtime/lang
1030
1031# Where to look for compiler files
1032COMPSOURCE = ../runtime/compiler
1033
1034# Where to look for keymap files
1035KMAPSOURCE = ../runtime/keymap
1036
1037# Where to look for print resource files
1038PRINTSOURCE = ../runtime/print
1039
1040# If you are using Linux, you might want to use this to make vim the
1041# default vi editor, it will create a link from vi to Vim when doing
1042# "make install". An existing file will be overwritten!
1043# When not using it, some make programs can't handle an undefined $(LINKIT).
1044#LINKIT = -ln -f -s $(BINDIR)/$(VIMTARGET) /usr/bin/vi
1045LINKIT = @echo >/dev/null
1046
1047###
1048### GRAPHICAL USER INTERFACE (GUI). {{{1
1049### 'configure --enable-gui' can enable one of these for you if you did set
1050### a corresponding CONF_OPT_GUI above and have X11.
1051### Override configures choice by uncommenting all the following lines.
1052### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF"
1053### for enabling the Athena or Motif GUI.
1054#GUI_SRC = $(NONE_SRC)
1055#GUI_OBJ = $(NONE_OBJ)
1056#GUI_DEFS = $(NONE_DEFS)
1057#GUI_IPATH = $(NONE_IPATH)
1058#GUI_LIBS_DIR = $(NONE_LIBS_DIR)
1059#GUI_LIBS1 = $(NONE_LIBS1)
1060#GUI_LIBS2 = $(NONE_LIBS2)
1061#GUI_INSTALL = $(NONE_INSTALL)
1062#GUI_TARGETS = $(NONE_TARGETS)
1063#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS)
1064#GUI_TESTTARGET = $(NONE_TESTTARGET)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001065#GUI_BUNDLE = $(NONE_BUNDLE)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001066
1067# Without a GUI install the normal way.
1068NONE_INSTALL = install_normal
1069
Bram Moolenaar843ee412004-06-30 16:16:41 +00001070### KDE GUI interface.
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00001071KDE_SRC = gui.c pty.c gui_kde.cc gui_kde_x11.cc gui_kde_wid.cc gui_kde_wid_moc.cc kvim_iface_skel.cc
Bram Moolenaar843ee412004-06-30 16:16:41 +00001072KDE_OBJ = objects/gui.o objects/pty.o objects/gui_kde.o objects/gui_kde_x11.o \
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00001073 objects/gui_kde_wid.o objects/gui_kde_wid_moc.o \
Bram Moolenaar843ee412004-06-30 16:16:41 +00001074 objects/kvim_iface_skel.o
1075KDE_DEFS = -DFEAT_GUI_KDE $(NARROW_PROTO)
1076KDE_IPATH = $(GUI_INC_LOC)
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001077KDE_LIBS_DIR = $(GUI_LIB_LOC) # Includes the libraries themselves
1078KDE_DIR = $(KDE_PREFIX)
Bram Moolenaar843ee412004-06-30 16:16:41 +00001079KDE_LIBS1 =
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001080KDE_LIBS2 =
Bram Moolenaar843ee412004-06-30 16:16:41 +00001081KDE_INSTALL = install_normal
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001082KDE_TARGETS = installglinks installkdeicons
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001083KDE_MAN_TARGETS = yes
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001084KDE_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001085KDE_BUNDLE =
Bram Moolenaar843ee412004-06-30 16:16:41 +00001086
Bram Moolenaare1d12892004-06-13 13:02:36 +00001087### GTK GUI
1088GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \
1089 gui_beval.c
1090GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \
1091 objects/pty.o objects/gui_gtk_f.o \
1092 objects/gui_beval.o
1093GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO)
1094GTK_IPATH = $(GUI_INC_LOC)
1095GTK_LIBS_DIR = $(GUI_LIB_LOC)
1096GTK_LIBS1 =
1097GTK_LIBS2 = $(GTK_LIBNAME)
1098GTK_INSTALL = install_normal
1099GTK_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001100GTK_MAN_TARGETS = yes
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001101GTK_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001102GTK_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001103
1104### Motif GUI
Bram Moolenaardfccaf02004-12-31 20:56:11 +00001105MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00001106 gui_xmdlg.c gui_xmebw.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00001107MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \
Bram Moolenaardfccaf02004-12-31 20:56:11 +00001108 objects/pty.o objects/gui_beval.o \
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00001109 objects/gui_xmdlg.o objects/gui_xmebw.o
Bram Moolenaare1d12892004-06-13 13:02:36 +00001110MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO)
1111MOTIF_IPATH = $(GUI_INC_LOC)
1112MOTIF_LIBS_DIR = $(GUI_LIB_LOC)
1113MOTIF_LIBS1 =
1114MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt
1115MOTIF_INSTALL = install_normal
1116MOTIF_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001117MOTIF_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001118MOTIF_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001119MOTIF_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001120
1121### Athena GUI
1122### Use Xaw3d to make the menus look a little bit nicer
1123#XAW_LIB = -lXaw3d
1124XAW_LIB = -lXaw
1125
1126### When using Xaw3d, uncomment/comment the following lines to also get the
1127### scrollbars from Xaw3d.
1128#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1129#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1130# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1131#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \
1132# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \
1133# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb
1134ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \
1135 gui_at_sb.c gui_at_fs.c
1136ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1137 objects/pty.o objects/gui_beval.o \
1138 objects/gui_at_sb.o objects/gui_at_fs.o
1139ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO)
1140
1141ATHENA_IPATH = $(GUI_INC_LOC)
1142ATHENA_LIBS_DIR = $(GUI_LIB_LOC)
1143ATHENA_LIBS1 = $(XAW_LIB)
1144ATHENA_LIBS2 = -lXt
1145ATHENA_INSTALL = install_normal
1146ATHENA_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001147ATHENA_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001148ATHENA_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001149ATHENA_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001150
1151### neXtaw GUI
1152NEXTAW_LIB = -lneXtaw
1153
1154NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1155NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1156 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1157NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO)
1158
1159NEXTAW_IPATH = $(GUI_INC_LOC)
1160NEXTAW_LIBS_DIR = $(GUI_LIB_LOC)
1161NEXTAW_LIBS1 = $(NEXTAW_LIB)
1162NEXTAW_LIBS2 = -lXt
1163NEXTAW_INSTALL = install_normal
1164NEXTAW_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001165NEXTAW_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001166NEXTAW_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001167NEXTAW_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001168
1169### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld
1170# errors: ld: Undefined symbol
1171# _get_wmShellWidgetClass
1172# _get_applicationShellWidgetClass
1173# then you need to get patches 100512-02 and 100573-03 from Sun. In the
1174# meantime, uncomment the following GUI_X_LIBS definition as a workaround:
1175#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext
1176# If you also get cos, sin etc. as undefined symbols, try uncommenting this
1177# too:
1178#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm
1179
Bram Moolenaare1d12892004-06-13 13:02:36 +00001180# PHOTON GUI
1181PHOTONGUI_SRC = gui.c gui_photon.c pty.c
1182PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o
1183PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON
1184PHOTONGUI_IPATH =
1185PHOTONGUI_LIBS_DIR =
1186PHOTONGUI_LIBS1 = -lph -lphexlib
1187PHOTONGUI_LIBS2 =
1188PHOTONGUI_INSTALL = install_normal
1189PHOTONGUI_TARGETS = installglinks
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001190PHOTONGUI_MAN_TARGETS = yes
Bram Moolenaare1d12892004-06-13 13:02:36 +00001191PHOTONGUI_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001192PHOTONGUI_BUNDLE =
Bram Moolenaare1d12892004-06-13 13:02:36 +00001193
1194# CARBON GUI
1195CARBONGUI_SRC = gui.c gui_mac.c
1196CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o
1197CARBONGUI_DEFS = -DFEAT_GUI_MAC -arch ppc -fno-common -fpascal-strings \
1198 -Wall -Wno-unknown-pragmas \
1199 -mdynamic-no-pic -pipe
1200CARBONGUI_IPATH = -I. -Iproto
1201CARBONGUI_LIBS_DIR =
1202CARBONGUI_LIBS1 = -framework Carbon
1203CARBONGUI_LIBS2 =
1204CARBONGUI_INSTALL = install_macosx
1205CARBONGUI_TARGETS =
1206CARBONGUI_MAN_TARGETS =
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00001207CARBONGUI_TESTTARGET = gui
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001208CARBONGUI_BUNDLE = gui_bundle
1209APPDIR = $(VIMNAME).app
1210CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001211
1212# All GUI files
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00001213ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c gui_kde.cc gui_kde_wid.cc gui_kde_x11.cc gui_kde_wid_moc.cc
Bram Moolenaar323850c2005-01-04 21:24:54 +00001214ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro
Bram Moolenaare1d12892004-06-13 13:02:36 +00001215
1216# }}}
1217
1218### Command to create dependencies based on #include "..."
1219### prototype headers are ignored due to -DPROTO, system
1220### headers #include <...> are ignored if we use the -MM option, as
1221### e.g. provided by gcc-cpp.
1222### Include FEAT_GUI to get gependency on gui.h
1223CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) $(DEPEND_CFLAGS)
1224
1225# flags for cproto
1226# This is for cproto 3 patchlevel 8 or below
1227# __inline, __attribute__ and __extension__ are not recognized by cproto
Bram Moolenaar051b7822005-05-19 21:00:46 +00001228NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \
1229 -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \
1230 -D__extension__= -D__restrict="" \
1231 -D__gnuc_va_list=char -D__builtin_va_list=char
Bram Moolenaare1d12892004-06-13 13:02:36 +00001232
1233#
1234# This is for cproto 3 patchlevel 9 or above (currently 4.6)
1235# __inline and __attribute__ are now recognized by cproto
1236# -D"foo()=" is not supported by all compilers so do not use it
1237# NO_ATTR=
1238#
1239# maybe the "/usr/bin/cc -E" has to be adjusted for some systems
1240# This is for cproto 3.5 patchlevel 3:
1241# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1242#
1243# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
1244# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1245#
1246# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
1247PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR)
1248
1249
1250################################################
1251## no changes required below this line ##
1252################################################
1253
1254SHELL = /bin/sh
1255
1256.SUFFIXES:
1257.SUFFIXES: .cc .c .o .pro
1258
1259PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS)
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001260POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001261
1262ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS)
1263
Bram Moolenaar051b7822005-05-19 21:00:46 +00001264LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca
1265
1266LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
Bram Moolenaare1d12892004-06-13 13:02:36 +00001267
1268DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS)
1269
1270PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS)
1271
1272ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR)
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001273ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001274
1275# abbreviations
1276DEST_BIN = $(DESTDIR)$(BINDIR)
1277DEST_VIM = $(DESTDIR)$(VIMLOC)
1278DEST_RT = $(DESTDIR)$(VIMRTLOC)
1279DEST_HELP = $(DESTDIR)$(HELPSUBLOC)
1280DEST_COL = $(DESTDIR)$(COLSUBLOC)
1281DEST_SYN = $(DESTDIR)$(SYNSUBLOC)
1282DEST_IND = $(DESTDIR)$(INDSUBLOC)
1283DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC)
1284DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC)
1285DEST_LANG = $(DESTDIR)$(LANGSUBLOC)
1286DEST_COMP = $(DESTDIR)$(COMPSUBLOC)
1287DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC)
1288DEST_MACRO = $(DESTDIR)$(MACROSUBLOC)
1289DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC)
1290DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001291DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001292DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC)
1293DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001294DEST_MAN_TOP = $(DESTDIR)$(MANDIR)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001295
1296# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages.
1297# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/"
1298# directory first.
Bram Moolenaar217ad922005-03-20 22:37:15 +00001299# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too.
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001300DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001301DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR)
1302DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR)
1303DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001304DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001305DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001306DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR)
1307DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR)
1308DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001309
1310# BASIC_SRC: files that are always used
1311# GUI_SRC: extra GUI files for current configuration
1312# ALL_GUI_SRC: all GUI files for Unix
1313#
1314# SRC: files used for current configuration
1315# TAGS_SRC: source files used for make tags
1316# TAGS_INCL: include files used for make tags
1317# ALL_SRC: source files used for make depend and make lint
1318
1319TAGS_INCL = *.h
1320
1321BASIC_SRC = \
1322 buffer.c \
1323 charset.c \
1324 diff.c \
1325 digraph.c \
1326 edit.c \
1327 eval.c \
1328 ex_cmds.c \
1329 ex_cmds2.c \
1330 ex_docmd.c \
1331 ex_eval.c \
1332 ex_getln.c \
1333 fileio.c \
1334 fold.c \
1335 getchar.c \
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00001336 hashtable.c \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001337 if_cscope.c \
1338 if_xcmdsrv.c \
1339 main.c \
1340 mark.c \
1341 memfile.c \
1342 memline.c \
1343 menu.c \
1344 message.c \
1345 misc1.c \
1346 misc2.c \
1347 move.c \
1348 mbyte.c \
1349 normal.c \
1350 ops.c \
1351 option.c \
1352 os_unix.c \
1353 auto/pathdef.c \
1354 quickfix.c \
1355 regexp.c \
1356 screen.c \
1357 search.c \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001358 spell.c \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001359 syntax.c \
1360 tag.c \
1361 term.c \
1362 ui.c \
1363 undo.c \
1364 version.c \
1365 window.c \
1366 $(OS_EXTRA_SRC)
1367
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001368SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \
1369 $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \
1370 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001371
Bram Moolenaar843ee412004-06-30 16:16:41 +00001372TAGS_SRC = *.c *.cpp *.cc if_perl.xs
Bram Moolenaare1d12892004-06-13 13:02:36 +00001373
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001374EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \
1375 if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \
1376 workshop.c wsdebug.c integration.c netbeans.c
Bram Moolenaare1d12892004-06-13 13:02:36 +00001377
1378# All sources, also the ones that are not configured
1379ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC)
1380
1381# Which files to check with lint. Select one of these three lines. ALL_SRC
1382# checks more, but may not work well for checking a GUI that wasn't configured.
1383# The perl sources also don't work well with lint.
1384LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \
1385 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC)
1386#LINT_SRC = $(SRC)
1387#LINT_SRC = $(ALL_SRC)
1388
1389OBJ = \
1390 objects/buffer.o \
1391 objects/charset.o \
1392 objects/diff.o \
1393 objects/digraph.o \
1394 objects/edit.o \
1395 objects/eval.o \
1396 objects/ex_cmds.o \
1397 objects/ex_cmds2.o \
1398 objects/ex_docmd.o \
1399 objects/ex_eval.o \
1400 objects/ex_getln.o \
1401 objects/fileio.o \
1402 objects/fold.o \
1403 objects/getchar.o \
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00001404 objects/hashtable.o \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001405 $(HANGULIN_OBJ) \
1406 objects/if_cscope.o \
1407 objects/if_xcmdsrv.o \
1408 objects/main.o \
1409 objects/mark.o \
1410 objects/memfile.o \
1411 objects/memline.o \
1412 objects/menu.o \
1413 objects/message.o \
1414 objects/misc1.o \
1415 objects/misc2.o \
1416 objects/move.o \
1417 objects/mbyte.o \
1418 objects/normal.o \
1419 objects/ops.o \
1420 objects/option.o \
1421 objects/os_unix.o \
1422 objects/pathdef.o \
1423 objects/quickfix.o \
1424 objects/regexp.o \
1425 objects/screen.o \
1426 objects/search.o \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001427 objects/spell.o \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001428 objects/syntax.o \
1429 $(SNIFF_OBJ) \
1430 objects/tag.o \
1431 objects/term.o \
1432 objects/ui.o \
1433 objects/undo.o \
1434 objects/window.o \
1435 $(GUI_OBJ) \
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001436 $(MZSCHEME_OBJ) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001437 $(PERL_OBJ) \
1438 $(PYTHON_OBJ) \
1439 $(TCL_OBJ) \
1440 $(RUBY_OBJ) \
1441 $(OS_EXTRA_OBJ) \
1442 $(WORKSHOP_OBJ) \
1443 $(NETBEANS_OBJ) \
1444 $(WSDEBUG_OBJ)
1445
1446PRO_AUTO = \
1447 buffer.pro \
1448 charset.pro \
1449 diff.pro \
1450 digraph.pro \
1451 edit.pro \
1452 eval.pro \
1453 ex_cmds.pro \
1454 ex_cmds2.pro \
1455 ex_docmd.pro \
1456 ex_eval.pro \
1457 ex_getln.pro \
1458 fileio.pro \
1459 fold.pro \
1460 getchar.pro \
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00001461 hashtable.pro \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001462 hangulin.pro \
1463 if_cscope.pro \
1464 if_xcmdsrv.pro \
1465 if_python.pro \
1466 if_ruby.pro \
1467 main.pro \
1468 mark.pro \
1469 memfile.pro \
1470 memline.pro \
1471 menu.pro \
1472 message.pro \
1473 misc1.pro \
1474 misc2.pro \
1475 move.pro \
1476 mbyte.pro \
1477 normal.pro \
1478 ops.pro \
1479 option.pro \
1480 os_unix.pro \
1481 quickfix.pro \
1482 regexp.pro \
1483 screen.pro \
1484 search.pro \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001485 spell.pro \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001486 syntax.pro \
1487 tag.pro \
1488 term.pro \
1489 termlib.pro \
1490 ui.pro \
1491 undo.pro \
1492 version.pro \
1493 window.pro \
1494 gui_beval.pro \
1495 workshop.pro \
1496 netbeans.pro \
1497 $(ALL_GUI_PRO) \
1498 $(TCL_PRO)
1499
1500PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
1501 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO)
1502
1503# Default target is making the executable and tools
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00001504all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001505
1506tools: $(TOOLS)
1507
1508# Run configure with all the setting from above.
1509#
1510# Note: auto/config.h doesn't depend on configure, because running configure
1511# doesn't always update auto/config.h. The timestamp isn't changed if the
1512# file contents didn't change (to avoid recompiling everything). Including a
1513# dependency on auto/config.h would cause running configure each time when
1514# auto/config.h isn't updated. The dependency on auto/config.mk should make
1515# sure configure is run when it's needed.
1516#
1517config auto/config.mk: auto/configure config.mk.in config.h.in
1518 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \
1519 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
1520 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
1521 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
1522 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \
1523 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
1524 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
1525 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
1526 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \
1527 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \
Bram Moolenaar325b7a22004-07-05 15:58:32 +00001528 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001529
1530# Use "make reconfig" to rerun configure without cached values.
1531# When config.h changes, most things will be recompiled automatically.
Bram Moolenaar592e0a22004-07-03 16:05:59 +00001532# Invoke $(MAKE) to run config with the empty auto/config.mk.
1533# Invoke $(MAKE) to build all with the filled auto/config.mk.
1534reconfig: scratch clean
1535 $(MAKE) -f Makefile config
1536 $(MAKE) -f Makefile all
Bram Moolenaare1d12892004-06-13 13:02:36 +00001537
1538# Run autoconf to produce auto/configure.
1539# Note:
1540# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of
1541# producing auto/configure.
1542# - autoconf is not run automatically, because a patch usually changes both
1543# configure.in and auto/configure but can't update the timestamps. People
1544# who do not have (the correct version of) autoconf would run into trouble.
1545#
1546# Two tricks are required to make autoconf put its output in the "auto" dir:
1547# - Temporarily move the ./configure script to ./configure.save. Don't
1548# overwrite it, it's probably the result of an aborted autoconf.
1549# - Use sed to change ./config.log to auto/config.log in the configure script.
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001550# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take
1551# care of:
1552# - configure.lineno: has the line numbers replaced with $LINENO. That
1553# improves patches a LOT, thus use it instead (until someone says it doesn't
1554# work on some system).
1555# - autom4te.cache directory is created and not cleaned up. Delete it.
1556# - Uses ">config.log" instead of "./config.log".
Bram Moolenaare1d12892004-06-13 13:02:36 +00001557autoconf:
1558 if test ! -f configure.save; then mv configure configure.save; fi
1559 autoconf
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001560 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure
Bram Moolenaare1d12892004-06-13 13:02:36 +00001561 chmod 755 auto/configure
1562 mv -f configure.save configure
Bram Moolenaar9d75c832005-01-25 21:57:23 +00001563 -rm -rf autom4te.cache
Bram Moolenaare1d12892004-06-13 13:02:36 +00001564 -rm -f auto/config.status auto/config.cache
1565
1566# Re-execute this Makefile to include the new auto/config.mk produced by
1567# configure Only used when typing "make" with a fresh auto/config.mk.
1568myself:
1569 $(MAKE) -f Makefile all
1570
1571
1572# The normal command to compile a .c file to its .o file.
1573CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS)
1574
1575
1576# Link the target for normal use or debugging.
1577# A shell script is used to try linking without unneccesary libraries.
1578$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h
1579 $(CCC) version.c -o objects/version.o
1580 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \
1581 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \
1582 MAKE="$(MAKE)" sh $(srcdir)/link.sh
1583
1584xxd/xxd$(EXEEXT): xxd/xxd.c
1585 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \
1586 $(MAKE) -f Makefile
1587
1588# Build the language specific files if they were unpacked.
1589# Generate the converted .mo files separately, it's no problem if this fails.
1590languages:
1591 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1592 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \
1593 fi
1594 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1595 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \
1596 fi
1597
1598# Update the *.po files for changes in the sources. Only run manually.
1599update-po:
1600 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po
1601
1602# Generate function prototypes. This is not needed to compile vim, but if
1603# you want to use it, cproto is out there on the net somewhere -- Webb
1604#
1605# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a
1606# few include files that can not be found, that's OK.
1607
1608proto: $(PRO_AUTO) $(PRO_MANUAL)
1609
1610### Would be nice if this would work for "normal" make.
1611### Currently it only works for (Free)BSD make.
1612#$(PRO_AUTO): $$(*F).c
1613# cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@
1614
1615# Always define FEAT_GUI. This may generate a few warnings if it's also
1616# defined in auto/config.h, you can ignore that.
1617.c.pro:
1618 cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@
1619 echo "/* vim: set ft=c : */" >> proto/$@
1620
1621os_amiga.pro: os_amiga.c
1622 cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@
1623 echo "/* vim: set ft=c : */" >> proto/$@
1624
1625os_msdos.pro: os_msdos.c
1626 cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@
1627 echo "/* vim: set ft=c : */" >> proto/$@
1628
1629os_win16.pro: os_win16.c
1630 cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@
1631 echo "/* vim: set ft=c : */" >> proto/$@
1632
1633os_win32.pro: os_win32.c
1634 cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1635 echo "/* vim: set ft=c : */" >> proto/$@
1636
1637os_mswin.pro: os_mswin.c
1638 cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1639 echo "/* vim: set ft=c : */" >> proto/$@
1640
1641os_beos.pro: os_beos.c
1642 cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@
1643 echo "/* vim: set ft=c : */" >> proto/$@
1644
1645os_vms.pro: os_vms.c
1646# must use os_vms_conf.h for auto/config.h
1647 mv auto/config.h auto/config.h.save
1648 cp os_vms_conf.h auto/config.h
1649 cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@
1650 echo "/* vim: set ft=c : */" >> proto/$@
1651 rm auto/config.h
1652 mv auto/config.h.save auto/config.h
1653
1654# if_perl.pro is special: Use the generated if_perl.c for input and remove
1655# prototypes for local functions.
1656if_perl.pro: auto/if_perl.c
1657 cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@
1658
1659
1660notags:
1661 -rm -f tags
1662
1663# Note: tags is made for the currently configured version, can't include both
1664# Motif and Athena GUI
1665# You can ignore error messages for missing files.
1666tags TAGS: notags
1667 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL)
1668
1669# Make a highlight file for types. Requires Exuberant ctags and awk
1670types: types.vim
1671types.vim: $(TAGS_SRC) $(TAGS_INCL)
1672 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\
1673 awk 'BEGIN{printf("syntax keyword Type\t")}\
1674 {printf("%s ", $$1)}END{print ""}' > $@
1675
1676# Execute the test scripts. Run these after compiling Vim, before installing.
1677# This doesn't depend on $(VIMTARGET), because that won't work when configure
1678# wasn't run yet. Restart make to build it instead.
1679#
1680# This will produce a lot of garbage on your screen, including a few error
1681# messages. Don't worry about that.
1682# If there is a real error, there will be a difference between "test.out" and
1683# a "test99.ok" file.
1684# If everything is allright, the final message will be "ALL DONE".
1685#
1686test check:
1687 $(MAKE) -f Makefile $(VIMTARGET)
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00001688 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001689
1690testclean:
1691 cd testdir; $(MAKE) -f Makefile clean
1692
1693#
1694# Avoid overwriting an existing executable, somebody might be running it and
1695# overwriting it could cause it to crash. Deleting it is OK, it won't be
1696# really deleted until all running processes for it have exited. It is
1697# renamed first, in case the deleting doesn't work.
1698#
1699# If you want to keep an older version, rename it before running "make
1700# install".
1701#
1702install: $(GUI_INSTALL)
1703
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001704install_normal: installvim installtools $(INSTALL_LANGS) install-icons
Bram Moolenaare1d12892004-06-13 13:02:36 +00001705
Bram Moolenaar217ad922005-03-20 22:37:15 +00001706installvim: installvimbin installruntime installlinks installmanlinks installmacros installtutor installspell
Bram Moolenaare1d12892004-06-13 13:02:36 +00001707
1708installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN)
1709 -if test -f $(DEST_BIN)/$(VIMTARGET); then \
1710 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \
1711 rm -f $(DEST_BIN)/$(VIMNAME).rm; \
1712 fi
1713 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN)
1714 $(STRIP) $(DEST_BIN)/$(VIMTARGET)
1715 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET)
1716# may create a link to the new executable from /usr/bin/vi
1717 -$(LINKIT)
1718
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001719# Long list of arguments for the shell script that installs the manual pages
1720# for one language.
1721INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \
1722 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME)
1723
1724# install the help files; first adjust the contents for the final location
1725installruntime: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001726 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001727 $(DEST_FTP) $(DEST_PLUG) $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001728 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001729 @echo generating help tags
1730# Generate the help tags with ":helptags" to handle all languages.
1731 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags
1732 cd $(HELPSOURCE); \
1733 files=`ls *.txt tags`; \
1734 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \
1735 $(INSTALL_DATA) $$files $(DEST_HELP); \
1736 cd $(DEST_HELP); \
1737 chmod $(HELPMOD) $$files
1738 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP)
1739 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl
1740# install the menu files
1741 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE)
1742 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE)
1743 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE)
1744 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE)
1745 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE)
1746 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE)
1747# install the evim file
1748 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE)
1749 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE)
1750 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE)
1751 chmod $(VIMSCRIPTMOD) $(EVIM_FILE)
1752# install the bugreport file
1753 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE)
1754 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE)
1755# install the example vimrc files
1756 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT)
1757 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim
1758 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT)
1759 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim
1760# install the file type detection files
1761 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE)
1762 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE)
1763 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE)
1764 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE)
1765 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE)
1766 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE)
1767 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE)
1768 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE)
1769 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE)
1770 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE)
1771 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE)
1772 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE)
1773 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE)
1774 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE)
1775 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE)
1776 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE)
1777# install the print resource files
1778 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT)
1779 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps
1780# install the colorscheme files
1781 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL)
1782 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt
1783# install the syntax files
1784 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN)
1785 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt
1786# install the indent files
1787 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND)
1788 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt
1789# install the standard plugin files
1790 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG)
1791 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt
1792# install the ftplugin files
1793 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP)
1794 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt
1795# install the compiler files
1796 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP)
1797 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt
1798
Bram Moolenaar582fd852005-03-28 20:58:01 +00001799installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001800 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO)
1801 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print`
1802 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print`
1803 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh
1804# When using CVS some CVS directories might have been copied.
1805 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \
1806 if test -n "$$cvs"; then \
1807 rm -rf $$cvs; \
1808 fi
1809
1810# install the tutor files
Bram Moolenaar582fd852005-03-28 20:58:01 +00001811installtutor: $(DEST_VIM) $(DEST_RT) $(DEST_TUTOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001812 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor
1813 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor
1814 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR)
1815 chmod $(HELPMOD) $(DEST_TUTOR)/*
1816
Bram Moolenaar217ad922005-03-20 22:37:15 +00001817# Install the spell files, if they exist.
Bram Moolenaar582fd852005-03-28 20:58:01 +00001818installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
Bram Moolenaar0e21a3f2005-04-17 20:28:32 +00001819 if test -f $(SPELLSOURCE)/en.latin1.spl; then \
1820 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(DEST_SPELL); \
1821 chmod $(HELPMOD) $(DEST_SPELL)/*.spl; \
1822 fi
1823 if test -f $(SPELLSOURCE)/en.utf-8.spl; then \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001824 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(DEST_SPELL); \
1825 chmod $(HELPMOD) $(DEST_SPELL)/*.spl; \
1826 fi
1827
Bram Moolenaare1d12892004-06-13 13:02:36 +00001828# install helper program xxd
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001829installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001830 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \
1831 $(INSTALL_TOOL_LANGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001832 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \
1833 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \
1834 rm -f $(DEST_BIN)/xxd.rm; \
1835 fi
1836 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN)
1837 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT)
1838 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001839 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001840
Bram Moolenaare1d12892004-06-13 13:02:36 +00001841# install the runtime tools
1842 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS)
1843# When using CVS some CVS directories might have been copied.
1844 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \
1845 if test -n "$$cvs"; then \
1846 rm -rf $$cvs; \
1847 fi
1848 -chmod $(FILEMOD) $(DEST_TOOLS)/*
1849# replace the path in some tools
1850 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl
1851 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1852 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1853 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi
1854 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*`
1855
Bram Moolenaar2389c3c2005-05-22 22:07:59 +00001856# install the language specific files for tools, if they were unpacked
1857install-tool-languages:
1858 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1859 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1860 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1861 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1862 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1863 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
1864 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1865 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1866
Bram Moolenaare1d12892004-06-13 13:02:36 +00001867# install the language specific files, if they were unpacked
1868install-languages: languages $(DEST_LANG) $(DEST_KMAP)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001869 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1870 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1871 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001872 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
Bram Moolenaar217ad922005-03-20 22:37:15 +00001873 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001874 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001875 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001876 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001877 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00001878 $(DEST_MAN_FR) $(INSTALLMLARGS)
1879 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1880 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
1881 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1882 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
1883 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001884 $(DEST_MAN_IT) $(INSTALLMLARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001885 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001886 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
1887 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001888 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
1889 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00001890 $(DEST_MAN_RU) $(INSTALLMLARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00001891 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1892 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00001893 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1894 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \
1895 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \
1896 fi
1897 if test -d $(LANGSOURCE); then \
1898 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \
1899 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \
1900 fi
1901 if test -d $(KMAPSOURCE); then \
1902 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \
1903 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \
1904 fi
1905
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001906# Install the icons for the KDE GUI. This differs from the KDE icons for
1907# other GUIs.
Bram Moolenaar843ee412004-06-30 16:16:41 +00001908installkdeicons:
1909 mkdir -p $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/
1910 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/
1911 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/
1912 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/
1913 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/
1914 mkdir -p $(DESTDIR)$(KDE_DIR)/share/apps/kvim
1915
1916 cp ../runtime/KVim.desktop $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/ && chmod 644 $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/KVim.desktop
1917 cp ../runtime/kvim32x32.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png
1918 cp ../runtime/kvim48x48.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png
1919 cp ../runtime/hi16-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/hi16-action-make.png
1920 cp ../runtime/hi22-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/hi22-action-make.png
1921 cp ../runtime/kde-tips $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips && chmod 644 $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips
1922
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00001923# install the icons for KDE, if the directory exists and the icon doesn't.
Bram Moolenaare1d12892004-06-13 13:02:36 +00001924ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps
1925ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps
1926ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps
1927KDEPATH = $(HOME)/.kde/share/icons
1928install-icons:
1929 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \
1930 -a ! -f $(ICON48PATH)/gvim.png; then \
1931 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \
1932 fi
1933 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \
1934 -a ! -f $(ICON32PATH)/gvim.png; then \
1935 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \
1936 fi
1937 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \
1938 -a ! -f $(ICON16PATH)/gvim.png; then \
1939 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \
1940 fi
1941
1942
1943$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE):
1944 @echo Runtime files not found.
1945 @echo You need to unpack the runtime archive before running "make install".
1946 test -f error
1947
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00001948$(DESTDIR)$(exec_prefix) $(DEST_BIN) \
1949 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \
Bram Moolenaare1d12892004-06-13 13:02:36 +00001950 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \
1951 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \
Bram Moolenaar217ad922005-03-20 22:37:15 +00001952 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \
1953 $(DEST_PLUG):
Bram Moolenaare1d12892004-06-13 13:02:36 +00001954 -$(SHELL) ./mkinstalldirs $@
1955 -chmod $(DIRMOD) $@
1956
1957# create links from various names to vim. This is only done when the links
1958# (or executables with the same name) don't exist yet.
1959installlinks: $(GUI_TARGETS) \
1960 $(DEST_BIN)/$(EXTARGET) \
1961 $(DEST_BIN)/$(VIEWTARGET) \
1962 $(DEST_BIN)/$(RVIMTARGET) \
1963 $(DEST_BIN)/$(RVIEWTARGET) \
1964 $(INSTALLVIMDIFF)
1965
1966installglinks: $(DEST_BIN)/$(GVIMTARGET) \
1967 $(DEST_BIN)/$(GVIEWTARGET) \
1968 $(DEST_BIN)/$(RGVIMTARGET) \
1969 $(DEST_BIN)/$(RGVIEWTARGET) \
1970 $(DEST_BIN)/$(EVIMTARGET) \
1971 $(DEST_BIN)/$(EVIEWTARGET) \
1972 $(INSTALLGVIMDIFF)
1973
1974installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET)
1975installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET)
1976
1977$(DEST_BIN)/$(EXTARGET):
1978 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET)
1979
1980$(DEST_BIN)/$(VIEWTARGET):
1981 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET)
1982
1983$(DEST_BIN)/$(GVIMTARGET):
1984 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET)
1985
1986$(DEST_BIN)/$(GVIEWTARGET):
1987 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET)
1988
1989$(DEST_BIN)/$(RVIMTARGET):
1990 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET)
1991
1992$(DEST_BIN)/$(RVIEWTARGET):
1993 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET)
1994
1995$(DEST_BIN)/$(RGVIMTARGET):
1996 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET)
1997
1998$(DEST_BIN)/$(RGVIEWTARGET):
1999 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET)
2000
2001$(DEST_BIN)/$(VIMDIFFTARGET):
2002 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET)
2003
2004$(DEST_BIN)/$(GVIMDIFFTARGET):
2005 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET)
2006
2007$(DEST_BIN)/$(EVIMTARGET):
2008 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET)
2009
2010$(DEST_BIN)/$(EVIEWTARGET):
2011 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET)
2012
2013# create links for the manual pages with various names to vim. This is only
2014# done when the links (or manpages with the same name) don't exist yet.
Bram Moolenaare1d12892004-06-13 13:02:36 +00002015
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002016INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \
2017 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \
2018 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \
2019 $(GVIMDIFFNAME) $(EVIEWNAME)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002020
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002021installmanlinks:
2022 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2023 $(DEST_MAN) $(INSTALLMLARGS)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002024
2025uninstall: uninstall_runtime
2026 -rm -f $(DEST_BIN)/$(VIMTARGET)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002027 -rm -f $(DEST_BIN)/vimtutor
Bram Moolenaare1d12892004-06-13 13:02:36 +00002028 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET)
2029 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET)
2030 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET)
2031 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET)
2032 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET)
2033 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002034 -rm -f $(DEST_BIN)/xxd$(EXEEXT)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002035
2036# Note: the "rmdir" will fail if any files were added after "make install"
2037uninstall_runtime:
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002038 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS)
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002039 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS)
2040 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS)
2041 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002042 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS)
Bram Moolenaar217ad922005-03-20 22:37:15 +00002043 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002044 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS)
2045 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS)
2046 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS)
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002047 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2048 $(DEST_MAN) $(INSTALLMLARGS)
2049 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002050 $(DEST_MAN_FR) $(INSTALLMLARGS)
2051 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2052 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
2053 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2054 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
2055 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaarb5bf5b82004-12-24 14:35:23 +00002056 $(DEST_MAN_IT) $(INSTALLMLARGS)
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002057 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar217ad922005-03-20 22:37:15 +00002058 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
2059 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002060 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
2061 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002062 $(DEST_MAN_RU) $(INSTALLMLARGS)
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002063 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2064 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
2065 -rm -f $(DEST_MAN)/xxd.1
Bram Moolenaar402d2fe2005-04-15 21:00:38 +00002066 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1
Bram Moolenaar217ad922005-03-20 22:37:15 +00002067 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002068 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1
Bram Moolenaare1d12892004-06-13 13:02:36 +00002069 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl
2070 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-??
2071 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE)
2072 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE)
2073 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim
2074 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE)
2075 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE)
2076 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE)
2077 -rm -f $(SYS_OPTWIN_FILE)
2078 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt
2079 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt
2080 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt
2081 -rm -rf $(DEST_MACRO)
2082 -rm -rf $(DEST_TUTOR)
Bram Moolenaar217ad922005-03-20 22:37:15 +00002083 -rm -rf $(DEST_SPELL)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002084 -rm -rf $(DEST_TOOLS)
2085 -rm -rf $(DEST_LANG)
2086 -rm -rf $(DEST_KMAP)
2087 -rm -rf $(DEST_COMP)
2088 -rm -f $(DEST_PRINT)/*.ps
2089 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND)
2090 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt
2091 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt
2092 -rmdir $(DEST_FTP) $(DEST_PLUG) $(DEST_RT)
2093# This will fail when other Vim versions are installed, no worries.
2094 -rmdir $(DEST_VIM)
2095
2096# Clean up all the files that have been produced, except configure's.
2097# We support common typing mistakes for Juergen! :-)
2098clean celan: testclean
2099 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) xxd/*.o
2100 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c
2101 -rm -f conftest* *~ auto/link.sed
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002102 -rm -rf $(APPDIR)
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002103 -rm -f gui_kde_wid_moc.cc kvim_iface_skel.cc *.kidl
Bram Moolenaare1d12892004-06-13 13:02:36 +00002104 if test -d $(PODIR); then \
2105 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \
2106 fi
2107
2108# Make a shadow directory for compilation on another system or with different
2109# features.
2110SHADOWDIR = shadow
2111
2112shadow: runtime pixmaps
2113 mkdir $(SHADOWDIR)
2114 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../vimtutor ../mkinstalldirs .
2115 mkdir $(SHADOWDIR)/auto
2116 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure .
2117 cd $(SHADOWDIR); rm -f auto/link.sed
2118 cp Makefile configure $(SHADOWDIR)
2119 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist
2120 cp config.mk.dist $(SHADOWDIR)/auto/config.mk
2121 cp config.mk.dist $(SHADOWDIR)
2122 mkdir $(SHADOWDIR)/xxd
2123 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* .
2124 mkdir $(SHADOWDIR)/testdir
2125 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \
2126 ../../testdir/vimrc.unix \
2127 ../../testdir/*.in \
2128 ../../testdir/unix.vim \
2129 ../../testdir/*.ok .
2130
2131# Link needed for doing "make install" in a shadow directory.
2132runtime:
2133 -ln -s ../runtime .
2134
2135# Link needed for doing "make" using GTK in a shadow directory.
2136pixmaps:
2137 -ln -s ../pixmaps .
2138
2139# Update the synmenu.vim file with the latest Syntax menu.
2140# This is only needed when runtime/makemenu.vim was changed.
2141menu: ./vim ../runtime/makemenu.vim
2142 ./vim -u ../runtime/makemenu.vim
2143
2144# Start configure from scratch
2145scrub scratch:
2146 -rm -f auto/config.status auto/config.cache config.log auto/config.log
2147 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk
2148 touch auto/config.h
2149 cp config.mk.dist auto/config.mk
2150
2151distclean: clean scratch
2152 -rm -f tags
2153
2154dist: distclean
2155 @echo
2156 @echo Making the distribution has to be done in the top directory
2157
2158mdepend:
2159 -@rm -f Makefile~
2160 cp Makefile Makefile~
2161 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2162 @for i in $(ALL_SRC) ; do \
2163 echo "$$i" ; \
2164 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\
2165 $(CPP) $$i |\
2166 grep '^# .*"\./.*\.h"' |\
2167 sort -t'"' -u +1 -2 |\
2168 sed -e 's/.*"\.\/\(.*\)".*/\1/'\
2169 ` >> tmp_make ; \
2170 done
2171 mv tmp_make Makefile
2172
2173depend:
2174 -@rm -f Makefile~
2175 cp Makefile Makefile~
2176 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2177 -for i in $(ALL_SRC); do echo $$i; \
2178 $(CPP_DEPEND) $$i | \
2179 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done
2180 mv tmp_make Makefile
2181
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002182# Run lint. Clean up the *.ln files that are sometimes left behind.
Bram Moolenaare1d12892004-06-13 13:02:36 +00002183lint:
Bram Moolenaar051b7822005-05-19 21:00:46 +00002184 lint $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC)
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002185 -rm -f *.ln
Bram Moolenaare1d12892004-06-13 13:02:36 +00002186
2187# Check dosinst.c with lint.
2188lintinstall:
2189 lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c
Bram Moolenaar9d75c832005-01-25 21:57:23 +00002190 -rm -f dosinst.ln
Bram Moolenaare1d12892004-06-13 13:02:36 +00002191
2192###########################################################################
2193
2194.c.o:
2195 $(CCC) $<
2196
2197.cc.o:
2198 $(CCC) $<
2199
2200auto/if_perl.c: if_perl.xs
2201 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@
2202 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \
2203 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@
2204
2205auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in
2206 CC="$(CC) $(ALL_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh
2207
2208QUOTESED = sed -e 's/"/\\"/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
2209auto/pathdef.c: Makefile auto/config.mk
2210 -@echo creating $@
2211 -@echo '/* pathdef.c */' > $@
2212 -@echo '/* This file is automatically created by Makefile' >> $@
2213 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@
2214 -@echo '#include "vim.h"' >> $@
2215 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@
2216 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@
2217 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@
2218 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@
2219 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@
2220 -@if test -n "$(COMPILEDBY)"; then \
2221 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \
2222 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi
2223 -@echo '";' >> $@
2224 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@
2225 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi
2226 -@echo '";' >> $@
2227 -@sh $(srcdir)/pathdef.sh
2228
2229# All the object files are put in the "objects" directory. Since not all make
2230# commands understand putting object files in another directory, it must be
2231# specified for each file separately.
2232
2233objects:
2234 mkdir objects
2235
2236objects/buffer.o: buffer.c
2237 $(CCC) -o $@ buffer.c
2238
2239objects/charset.o: charset.c
2240 $(CCC) -o $@ charset.c
2241
2242objects/diff.o: diff.c
2243 $(CCC) -o $@ diff.c
2244
2245objects/digraph.o: digraph.c
2246 $(CCC) -o $@ digraph.c
2247
2248objects/edit.o: edit.c
2249 $(CCC) -o $@ edit.c
2250
2251objects/eval.o: eval.c
2252 $(CCC) -o $@ eval.c
2253
2254objects/ex_cmds.o: ex_cmds.c
2255 $(CCC) -o $@ ex_cmds.c
2256
2257objects/ex_cmds2.o: ex_cmds2.c
2258 $(CCC) -o $@ ex_cmds2.c
2259
2260objects/ex_docmd.o: ex_docmd.c
2261 $(CCC) -o $@ ex_docmd.c
2262
2263objects/ex_eval.o: ex_eval.c
2264 $(CCC) -o $@ ex_eval.c
2265
2266objects/ex_getln.o: ex_getln.c
2267 $(CCC) -o $@ ex_getln.c
2268
2269objects/fileio.o: fileio.c
2270 $(CCC) -o $@ fileio.c
2271
2272objects/fold.o: fold.c
2273 $(CCC) -o $@ fold.c
2274
2275objects/getchar.o: getchar.c
2276 $(CCC) -o $@ getchar.c
2277
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00002278objects/hashtable.o: hashtable.c
2279 $(CCC) -o $@ hashtable.c
2280
Bram Moolenaare1d12892004-06-13 13:02:36 +00002281objects/gui.o: gui.c
2282 $(CCC) -o $@ gui.c
2283
2284objects/gui_at_fs.o: gui_at_fs.c
2285 $(CCC) -o $@ gui_at_fs.c
2286
2287objects/gui_at_sb.o: gui_at_sb.c
2288 $(CCC) -o $@ gui_at_sb.c
2289
2290objects/gui_athena.o: gui_athena.c
2291 $(CCC) -o $@ gui_athena.c
2292
Bram Moolenaare1d12892004-06-13 13:02:36 +00002293objects/gui_beval.o: gui_beval.c
2294 $(CCC) -o $@ gui_beval.c
2295
2296objects/gui_gtk.o: gui_gtk.c
2297 $(CCC) -o $@ gui_gtk.c
2298
2299objects/gui_gtk_f.o: gui_gtk_f.c
2300 $(CCC) -o $@ gui_gtk_f.c
2301
2302objects/gui_gtk_x11.o: gui_gtk_x11.c
2303 $(CCC) -o $@ gui_gtk_x11.c
2304
2305objects/gui_motif.o: gui_motif.c
2306 $(CCC) -o $@ gui_motif.c
2307
Bram Moolenaardfccaf02004-12-31 20:56:11 +00002308objects/gui_xmdlg.o: gui_xmdlg.c
2309 $(CCC) -o $@ gui_xmdlg.c
2310
Bram Moolenaarb7fcef52005-01-02 11:31:05 +00002311objects/gui_xmebw.o: gui_xmebw.c
2312 $(CCC) -o $@ gui_xmebw.c
2313
Bram Moolenaare1d12892004-06-13 13:02:36 +00002314objects/gui_x11.o: gui_x11.c
2315 $(CCC) -o $@ gui_x11.c
2316
2317objects/gui_photon.o: gui_photon.c
2318 $(CCC) -o $@ gui_photon.c
2319
2320objects/gui_mac.o: gui_mac.c
2321 $(CCC) -o $@ gui_mac.c
2322
2323objects/hangulin.o: hangulin.c
2324 $(CCC) -o $@ hangulin.c
2325
2326objects/if_cscope.o: if_cscope.c
2327 $(CCC) -o $@ if_cscope.c
2328
2329objects/if_xcmdsrv.o: if_xcmdsrv.c
2330 $(CCC) -o $@ if_xcmdsrv.c
2331
Bram Moolenaar325b7a22004-07-05 15:58:32 +00002332objects/if_mzsch.o: if_mzsch.c
2333 $(CCC) -o $@ if_mzsch.c
2334
Bram Moolenaare1d12892004-06-13 13:02:36 +00002335objects/if_perl.o: auto/if_perl.c
2336 $(CCC) -o $@ auto/if_perl.c
2337
2338objects/if_perlsfio.o: if_perlsfio.c
2339 $(CCC) -o $@ if_perlsfio.c
2340
2341objects/if_python.o: if_python.c
2342 $(CCC) -o $@ if_python.c
2343
2344objects/if_ruby.o: if_ruby.c
2345 $(CCC) -o $@ if_ruby.c
2346
2347objects/if_sniff.o: if_sniff.c
2348 $(CCC) -o $@ if_sniff.c
2349
2350objects/if_tcl.o: if_tcl.c
2351 $(CCC) -o $@ if_tcl.c
2352
2353objects/integration.o: integration.c
2354 $(CCC) -o $@ integration.c
2355
2356objects/main.o: main.c
2357 $(CCC) -o $@ main.c
2358
2359objects/mark.o: mark.c
2360 $(CCC) -o $@ mark.c
2361
2362objects/memfile.o: memfile.c
2363 $(CCC) -o $@ memfile.c
2364
2365objects/memline.o: memline.c
2366 $(CCC) -o $@ memline.c
2367
2368objects/menu.o: menu.c
2369 $(CCC) -o $@ menu.c
2370
2371objects/message.o: message.c
2372 $(CCC) -o $@ message.c
2373
2374objects/misc1.o: misc1.c
2375 $(CCC) -o $@ misc1.c
2376
2377objects/misc2.o: misc2.c
2378 $(CCC) -o $@ misc2.c
2379
2380objects/move.o: move.c
2381 $(CCC) -o $@ move.c
2382
2383objects/mbyte.o: mbyte.c
2384 $(CCC) -o $@ mbyte.c
2385
2386objects/normal.o: normal.c
2387 $(CCC) -o $@ normal.c
2388
2389objects/ops.o: ops.c
2390 $(CCC) -o $@ ops.c
2391
2392objects/option.o: option.c
2393 $(CCC) -o $@ option.c
2394
2395objects/os_beos.o: os_beos.c
2396 $(CCC) -o $@ os_beos.c
2397
2398objects/os_qnx.o: os_qnx.c
2399 $(CCC) -o $@ os_qnx.c
2400
2401objects/os_macosx.o: os_macosx.c
2402 $(CCC) -o $@ os_macosx.c
2403
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002404objects/os_mac_conv.o: os_mac_conv.c
2405 $(CCC) -o $@ os_mac_conv.c
2406
Bram Moolenaare1d12892004-06-13 13:02:36 +00002407objects/os_unix.o: os_unix.c
2408 $(CCC) -o $@ os_unix.c
2409
2410objects/pathdef.o: auto/pathdef.c
2411 $(CCC) -o $@ auto/pathdef.c
2412
2413objects/py_config.o: $(PYTHON_CONFDIR)/config.c
2414 $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \
2415 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
2416
2417objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c
2418 $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \
2419 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \
2420 $(PYTHON_GETPATH_CFLAGS)
2421
2422objects/pty.o: pty.c
2423 $(CCC) -o $@ pty.c
2424
2425objects/quickfix.o: quickfix.c
2426 $(CCC) -o $@ quickfix.c
2427
2428objects/regexp.o: regexp.c
2429 $(CCC) -o $@ regexp.c
2430
2431objects/screen.o: screen.c
2432 $(CCC) -o $@ screen.c
2433
2434objects/search.o: search.c
2435 $(CCC) -o $@ search.c
2436
Bram Moolenaar217ad922005-03-20 22:37:15 +00002437objects/spell.o: spell.c
2438 $(CCC) -o $@ spell.c
2439
Bram Moolenaare1d12892004-06-13 13:02:36 +00002440objects/syntax.o: syntax.c
2441 $(CCC) -o $@ syntax.c
2442
2443objects/tag.o: tag.c
2444 $(CCC) -o $@ tag.c
2445
2446objects/term.o: term.c
2447 $(CCC) -o $@ term.c
2448
2449objects/ui.o: ui.c
2450 $(CCC) -o $@ ui.c
2451
2452objects/undo.o: undo.c
2453 $(CCC) -o $@ undo.c
2454
2455objects/window.o: window.c
2456 $(CCC) -o $@ window.c
2457
2458objects/workshop.o: workshop.c
2459 $(CCC) -o $@ workshop.c
2460
2461objects/wsdebug.o: wsdebug.c
2462 $(CCC) -o $@ wsdebug.c
2463
Bram Moolenaar843ee412004-06-30 16:16:41 +00002464objects/gui_kde.o: gui_kde.cc
2465 $(CCC) -o $@ gui_kde.cc
2466
2467objects/gui_kde_x11.o: gui_kde_x11.cc
2468 $(CCC) -o $@ gui_kde_x11.cc
2469
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002470objects/gui_kde_wid.o: gui_kde_wid.cc
2471 $(MOC) -o gui_kde_wid_moc.cc gui_kde_wid.h
Bram Moolenaar843ee412004-06-30 16:16:41 +00002472 $(KDE_DIR)/bin/dcopidl kvim_iface.h > kvim_iface.kidl || ( rm -f kvim_iface.kidl ; /bin/false )
2473 $(KDE_DIR)/bin/dcopidl2cpp --c++-suffix cc --no-stub kvim_iface.kidl
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002474 $(CCC) -o $@ gui_kde_wid.cc
Bram Moolenaar843ee412004-06-30 16:16:41 +00002475
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002476gui_kde_wid_moc.cc: objects/gui_kde_wid.o
2477objects/gui_kde_wid_moc.o: gui_kde_wid_moc.cc
2478 $(CCC) -o $@ gui_kde_wid_moc.cc
Bram Moolenaar843ee412004-06-30 16:16:41 +00002479
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002480kvim_iface_skel.cc: objects/gui_kde_wid.o
Bram Moolenaar843ee412004-06-30 16:16:41 +00002481objects/kvim_iface_skel.o: kvim_iface_skel.cc
2482 $(CCC) -o $@ kvim_iface_skel.cc
2483
Bram Moolenaare1d12892004-06-13 13:02:36 +00002484objects/netbeans.o: netbeans.c
2485 $(CCC) -o $@ netbeans.c
2486
2487Makefile:
2488 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!!
2489
2490###############################################################################
2491### MacOS X installation
2492###
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002493### This installs a runnable Vim.app in $(prefix)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002494
2495REZ = /Developer/Tools/Rez
Bram Moolenaare1d12892004-06-13 13:02:36 +00002496RESDIR = $(APPDIR)/Contents/Resources
Bram Moolenaar2df6dcc2004-07-12 15:53:54 +00002497VERSION = $(VIMMAJOR).$(VIMMINOR)
Bram Moolenaare1d12892004-06-13 13:02:36 +00002498
2499### Common flags
2500M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \
2501 -DAPP_VER=$(VERSION) -DICON_APP=$(ICON_APP)
2502
2503### Icons
2504ICON_APP = gui_mac.icns
2505ICONS = $(RESDIR)/$(ICON_APP)
2506
2507# If you uncomment the following lines the *.icns in the src directory will be
2508# detected by this Makefile automatically, and used for Vim.
2509#ICON_APP = $(shell if [ -e app.icns ] ; then echo app.icns ; else echo gui_mac.icns ; fi)
2510#ICON_DOC = $(shell if [ -e doc.icns ] ; then echo doc.icns ; else echo ; fi)
2511#ICON_DOCTXT = $(shell if [ -e doc-txt.icns ] ; then echo doc-txt.icns ; else echo ; fi)
2512#ICONS = $(addprefix $(RESDIR)/, $(ICON_APP) $(ICON_DOC) $(ICON_DOCTXT))
2513
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002514install_macosx: gui_bundle
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002515 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix)
2516
Bram Moolenaarcd71fa32005-03-11 22:46:48 +00002517gui_bundle: $(APPDIR) bundle-dir bundle-executable bundle-info bundle-resource \
Bram Moolenaare1d12892004-06-13 13:02:36 +00002518 bundle-language
2519
Bram Moolenaar4317d9b2005-03-18 20:25:31 +00002520$(APPDIR):
2521 mkdir -p $@
2522
Bram Moolenaare1d12892004-06-13 13:02:36 +00002523bundle-dir: $(APPDIR)/Contents $(VIMTARGET)
2524 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags
2525 cp -R ../runtime $(APPDIR)
Bram Moolenaardf177f62005-02-22 08:39:57 +00002526# When using CVS some CVS directories might have been copied.
2527 cvs=`find $(APPDIR) \( -name CVS -o -name AAPDIR \) -print`; \
2528 if test -n "$$cvs"; then \
2529 rm -rf $$cvs; \
2530 fi
Bram Moolenaare1d12892004-06-13 13:02:36 +00002531
2532bundle-executable: $(VIMTARGET)
2533 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET)
2534
2535bundle-info: bundle-dir
2536 @echo "Creating PkgInfo"
2537 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo
2538 @echo "Creating Info.plist"
2539 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist
2540
2541bundle-resource: bundle-dir bundle-icons bundle-rsrc
2542
2543bundle-icons: $(ICONS)
2544
2545### Classic resources
2546# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9)
2547# This file is also required for OS X Vim.
2548bundle-rsrc: os_mac.rsr.hqx
2549 @echo "Creating resource fork"
2550 python dehqx.py $<
2551 rm -f gui_mac.rsrc
2552 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc
2553
2554# po/Make_osx.pl says something about generating a Mac message file
2555# for Ukrananian. Would somebody using Mac OS X in Ukranian
2556# *really* be upset that Carbon Vim was not localised in
2557# Ukranian?
2558#
2559#bundle-language: bundle-dir po/Make_osx.pl
2560# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG)
2561bundle-language: bundle-dir
2562
2563$(APPDIR)/Contents:
Bram Moolenaarab79bcb2004-07-18 21:34:53 +00002564 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS
2565 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj
Bram Moolenaare1d12892004-06-13 13:02:36 +00002566
2567$(RESDIR)/%.icns: %.icns
2568 cp $< $@
2569
2570
2571###############################################################################
2572### (automatically generated by 'make depend')
2573### Dependencies:
2574objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h \
2575 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2576 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2577 globals.h farsi.h arabic.h version.h
2578objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h \
2579 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2580 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2581 globals.h farsi.h arabic.h
2582objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2583 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2584 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2585 arabic.h
2586objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h \
2587 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2588 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2589 globals.h farsi.h arabic.h
2590objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2591 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2592 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2593 arabic.h
2594objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2595 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2596 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2597 arabic.h version.h
2598objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h \
2599 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2600 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2601 globals.h farsi.h arabic.h version.h
2602objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \
2603 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2604 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2605 globals.h farsi.h arabic.h version.h
2606objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \
2607 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2608 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2609 globals.h farsi.h arabic.h
2610objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h \
2611 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2612 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2613 globals.h farsi.h arabic.h
2614objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \
2615 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2616 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2617 globals.h farsi.h arabic.h
2618objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h \
2619 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2620 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2621 globals.h farsi.h arabic.h
2622objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2623 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2624 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2625 arabic.h
2626objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h \
2627 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2628 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2629 globals.h farsi.h arabic.h
Bram Moolenaar383f9bc2005-01-19 22:18:32 +00002630objects/hashtable.o: hashtable.c vim.h auto/config.h feature.h os_unix.h \
2631 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2632 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2633 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002634objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \
2635 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2636 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2637 globals.h farsi.h arabic.h if_cscope.h
2638objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \
2639 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2640 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2641 globals.h farsi.h arabic.h version.h
2642objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2643 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2644 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2645 arabic.h farsi.c arabic.c
2646objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2647 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2648 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2649 arabic.h
2650objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h \
2651 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2652 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2653 globals.h farsi.h arabic.h
2654objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h \
2655 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2656 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2657 globals.h farsi.h arabic.h
2658objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2659 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2660 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2661 arabic.h
2662objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h \
2663 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2664 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2665 globals.h farsi.h arabic.h
2666objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2667 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2668 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2669 arabic.h version.h
2670objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2671 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2672 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2673 arabic.h
2674objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2675 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2676 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2677 arabic.h
2678objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2679 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2680 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2681 arabic.h
2682objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h \
2683 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2684 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2685 globals.h farsi.h arabic.h
2686objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2687 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2688 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2689 arabic.h
2690objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h \
2691 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2692 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2693 globals.h farsi.h arabic.h
2694objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h \
2695 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2696 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2697 globals.h farsi.h arabic.h os_unixx.h
2698objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \
2699 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2700 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2701 globals.h farsi.h arabic.h
2702objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \
2703 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2704 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2705 globals.h farsi.h arabic.h
2706objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h \
2707 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2708 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2709 globals.h farsi.h arabic.h
2710objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h \
2711 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2712 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2713 globals.h farsi.h arabic.h
2714objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h \
2715 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2716 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2717 globals.h farsi.h arabic.h
Bram Moolenaar217ad922005-03-20 22:37:15 +00002718objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h \
2719 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2720 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2721 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002722objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h \
2723 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2724 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2725 globals.h farsi.h arabic.h
2726objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2727 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2728 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2729 arabic.h
2730objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2731 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2732 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2733 arabic.h
2734objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2735 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2736 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2737 arabic.h
2738objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2739 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2740 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2741 arabic.h
2742objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h \
2743 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2744 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2745 globals.h farsi.h arabic.h version.h
2746objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h \
2747 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2748 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2749 globals.h farsi.h arabic.h
2750objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2751 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2752 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2753 arabic.h
2754objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h \
2755 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \
2756 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \
2757 proto.h globals.h farsi.h arabic.h ../pixmaps/stock_icons.h
2758objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \
2759 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2760 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2761 globals.h farsi.h arabic.h gui_gtk_f.h
2762objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \
2763 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2764 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2765 globals.h farsi.h arabic.h ../pixmaps/alert.xpm ../pixmaps/error.xpm \
2766 ../pixmaps/generic.xpm ../pixmaps/info.xpm ../pixmaps/quest.xpm
2767objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \
2768 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2769 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2770 globals.h farsi.h arabic.h gui_at_sb.h
2771objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \
2772 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2773 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2774 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \
2775 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
2776objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h \
2777 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2778 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2779 globals.h farsi.h arabic.h ../runtime/vim32x32.xpm \
2780 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm ../pixmaps/tb_new.xpm \
2781 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \
2782 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \
2783 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2784 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2785 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2786 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2787 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2788 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2789 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2790 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2791 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2792 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2793 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2794 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2795 ../pixmaps/tb_minwidth.xpm
2796objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \
2797 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2798 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2799 globals.h farsi.h arabic.h gui_at_sb.h
2800objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \
2801 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2802 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2803 globals.h farsi.h arabic.h gui_at_sb.h
2804objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2805 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \
2806 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \
2807 arabic.h
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002808objects/gui_kde.o: gui_kde.cc gui_kde_wid.h kvim_iface.h vim.h \
Bram Moolenaar843ee412004-06-30 16:16:41 +00002809 auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \
2810 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \
2811 globals.h farsi.h
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002812objects/gui_kde_wid.o: gui_kde_wid.cc gui_kde_wid.h kvim_iface.h \
Bram Moolenaar843ee412004-06-30 16:16:41 +00002813 vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \
2814 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \
2815 globals.h farsi.h proto/../../pixmaps/alert.xpm proto/../../pixmaps/error.xpm \
2816 proto/../../pixmaps/generic.xpm proto/../../pixmaps/info.xpm \
2817 proto/../../pixmaps/quest.xpm
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002818objects/gui_kde_x11.o: gui_kde_x11.cc gui_kde_wid.h kvim_iface.h vim.h \
Bram Moolenaar843ee412004-06-30 16:16:41 +00002819 auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \
2820 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \
2821 globals.h farsi.h version.h ../runtime/vim32x32.xpm
Bram Moolenaar5eb86f92004-07-26 12:53:41 +00002822objects/gui_kde_wid_moc.o: gui_kde_wid_moc.cc gui_kde_wid.h \
Bram Moolenaar843ee412004-06-30 16:16:41 +00002823 kvim_iface.h vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2824 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h option.h \
2825 ex_cmds.h proto.h globals.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002826objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \
2827 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2828 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2829 globals.h farsi.h arabic.h
Bram Moolenaar325b7a22004-07-05 15:58:32 +00002830objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \
2831 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2832 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2833 globals.h farsi.h arabic.h
Bram Moolenaare1d12892004-06-13 13:02:36 +00002834objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \
2835 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2836 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2837 globals.h farsi.h arabic.h
2838objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \
2839 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2840 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2841 globals.h farsi.h arabic.h
2842objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \
2843 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2844 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2845 globals.h farsi.h arabic.h
2846objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h \
2847 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2848 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2849 globals.h farsi.h arabic.h
2850objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h \
2851 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2852 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2853 globals.h farsi.h arabic.h version.h
2854objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \
2855 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2856 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2857 globals.h farsi.h arabic.h os_unixx.h
2858objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \
2859 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2860 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2861 globals.h farsi.h arabic.h
2862objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \
2863 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \
2864 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \
2865 proto.h globals.h farsi.h arabic.h version.h workshop.h
2866objects/wsdebug.o: wsdebug.c
2867objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \
2868 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2869 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2870 globals.h farsi.h arabic.h integration.h
2871objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \
2872 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \
2873 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \
2874 globals.h farsi.h arabic.h version.h