blob: 78ce61d78b579e7b79e91801bf66e6637755fb44 [file] [log] [blame]
Myles Watson274a3812017-02-23 06:29:08 -08001//
2// Copyright 2017 The Android Open Source Project
3//
4// Licensed under the Apache License, Version 2.0 (the "License");
5// you may not use this file except in compliance with the License.
6// You may obtain a copy of the License at
7//
8// http://www.apache.org/licenses/LICENSE-2.0
9//
10// Unless required by applicable law or agreed to in writing, software
11// distributed under the License is distributed on an "AS IS" BASIS,
12// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13// See the License for the specific language governing permissions and
14// limitations under the License.
15//
16
17#include "hci_packetizer.h"
18
19#define LOG_TAG "android.hardware.bluetooth.hci_packetizer"
Myles Watson274a3812017-02-23 06:29:08 -080020
21#include <dlfcn.h>
Myles Watson3e272a72017-06-26 13:09:11 -070022#include <errno.h>
Myles Watson274a3812017-02-23 06:29:08 -080023#include <fcntl.h>
Jiyong Parkcb198f72017-07-10 13:27:05 +090024#include <unistd.h>
Myles Watson3e272a72017-06-26 13:09:11 -070025#include <utils/Log.h>
Myles Watson274a3812017-02-23 06:29:08 -080026
27namespace {
28
Jakub Pawlowskidb779b42020-11-23 14:07:54 +010029const size_t preamble_size_for_type[] = {0,
30 HCI_COMMAND_PREAMBLE_SIZE,
31 HCI_ACL_PREAMBLE_SIZE,
32 HCI_SCO_PREAMBLE_SIZE,
33 HCI_EVENT_PREAMBLE_SIZE,
34 HCI_ISO_PREAMBLE_SIZE};
35const size_t packet_length_offset_for_type[] = {0,
36 HCI_LENGTH_OFFSET_CMD,
37 HCI_LENGTH_OFFSET_ACL,
38 HCI_LENGTH_OFFSET_SCO,
39 HCI_LENGTH_OFFSET_EVT,
40 HCI_LENGTH_OFFSET_ISO};
Myles Watson274a3812017-02-23 06:29:08 -080041
42size_t HciGetPacketLengthForType(HciPacketType type, const uint8_t* preamble) {
43 size_t offset = packet_length_offset_for_type[type];
Jakub Pawlowskidb779b42020-11-23 14:07:54 +010044 if (type == HCI_PACKET_TYPE_ACL_DATA) {
45 return (((preamble[offset + 1]) << 8) | preamble[offset]);
46 } else if (type == HCI_PACKET_TYPE_ISO_DATA) {
47 return ((((preamble[offset + 1]) & 0x3f) << 8) | preamble[offset]);
48 }
49 return preamble[offset];
Myles Watson274a3812017-02-23 06:29:08 -080050}
51
52} // namespace
53
54namespace android {
55namespace hardware {
56namespace bluetooth {
57namespace hci {
58
Jack Hecaeab052018-10-23 18:13:51 -070059const hidl_vec<uint8_t>& HciPacketizer::GetPacket() const { return packet_; }
Myles Watson274a3812017-02-23 06:29:08 -080060
Zach Johnson917efb12017-02-26 23:46:05 -080061void HciPacketizer::OnDataReady(int fd, HciPacketType packet_type) {
62 switch (state_) {
63 case HCI_PREAMBLE: {
Myles Watson3e272a72017-06-26 13:09:11 -070064 ssize_t bytes_read = TEMP_FAILURE_RETRY(
Zach Johnson917efb12017-02-26 23:46:05 -080065 read(fd, preamble_ + bytes_read_,
66 preamble_size_for_type[packet_type] - bytes_read_));
Myles Watson0d63f8a2018-01-08 16:49:13 -080067 if (bytes_read == 0) {
68 // This is only expected if the UART got closed when shutting down.
69 ALOGE("%s: Unexpected EOF reading the header!", __func__);
70 sleep(5); // Expect to be shut down within 5 seconds.
71 return;
72 }
73 if (bytes_read < 0) {
Myles Watson3e272a72017-06-26 13:09:11 -070074 LOG_ALWAYS_FATAL("%s: Read header error: %s", __func__,
75 strerror(errno));
76 }
Zach Johnson917efb12017-02-26 23:46:05 -080077 bytes_read_ += bytes_read;
78 if (bytes_read_ == preamble_size_for_type[packet_type]) {
Myles Watson274a3812017-02-23 06:29:08 -080079 size_t packet_length =
Zach Johnson917efb12017-02-26 23:46:05 -080080 HciGetPacketLengthForType(packet_type, preamble_);
81 packet_.resize(preamble_size_for_type[packet_type] + packet_length);
82 memcpy(packet_.data(), preamble_, preamble_size_for_type[packet_type]);
83 bytes_remaining_ = packet_length;
84 state_ = HCI_PAYLOAD;
85 bytes_read_ = 0;
Myles Watson274a3812017-02-23 06:29:08 -080086 }
87 break;
88 }
89
90 case HCI_PAYLOAD: {
Myles Watson3e272a72017-06-26 13:09:11 -070091 ssize_t bytes_read = TEMP_FAILURE_RETRY(read(
Zach Johnson917efb12017-02-26 23:46:05 -080092 fd,
93 packet_.data() + preamble_size_for_type[packet_type] + bytes_read_,
94 bytes_remaining_));
Myles Watson0d63f8a2018-01-08 16:49:13 -080095 if (bytes_read == 0) {
96 // This is only expected if the UART got closed when shutting down.
97 ALOGE("%s: Unexpected EOF reading the payload!", __func__);
98 sleep(5); // Expect to be shut down within 5 seconds.
99 return;
100 }
101 if (bytes_read < 0) {
Myles Watson3e272a72017-06-26 13:09:11 -0700102 LOG_ALWAYS_FATAL("%s: Read payload error: %s", __func__,
103 strerror(errno));
104 }
Zach Johnson917efb12017-02-26 23:46:05 -0800105 bytes_remaining_ -= bytes_read;
106 bytes_read_ += bytes_read;
107 if (bytes_remaining_ == 0) {
108 packet_ready_cb_();
109 state_ = HCI_PREAMBLE;
110 bytes_read_ = 0;
Myles Watson274a3812017-02-23 06:29:08 -0800111 }
112 break;
113 }
114 }
115}
116
117} // namespace hci
118} // namespace bluetooth
119} // namespace hardware
120} // namespace android