| George Chang | d48ff14 | 2021-03-10 20:35:15 +0800 | [diff] [blame] | 1 | ############################################################################### |
| 2 | # Application options |
| 3 | NFC_DEBUG_ENABLED=0 |
| 4 | |
| 5 | ############################################################################### |
| 6 | # File used for NFA storage |
| 7 | NFA_STORAGE="/data/nfc" |
| 8 | |
| 9 | ############################################################################### |
| 10 | # Force UICC to only listen to the following technology(s). |
| 11 | # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| 12 | # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F |
| 13 | UICC_LISTEN_TECH_MASK=0x07 |
| 14 | |
| 15 | ############################################################################### |
| George Chang | af48a48 | 2021-05-25 17:24:50 +0800 | [diff] [blame] | 16 | # Set HOST default listen to the following technology(s). |
| 17 | # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| 18 | # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
| 19 | # 0x07 = A + B + F |
| 20 | HOST_LISTEN_TECH_MASK=0x07 |
| 21 | |
| 22 | ############################################################################### |
| George Chang | d48ff14 | 2021-03-10 20:35:15 +0800 | [diff] [blame] | 23 | # AID for Empty Select command |
| 24 | # If specified, this AID will be substituted when an Empty SELECT command is |
| 25 | # detected. The first byte is the length of the AID. Maximum length is 16. |
| 26 | AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} |
| 27 | |
| 28 | ############################################################################### |
| 29 | # When screen is turned off, specify the desired power state of the controller. |
| 30 | # 0: power-off-sleep state; DEFAULT |
| 31 | # 1: full-power state |
| 32 | # 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) |
| 33 | SCREEN_OFF_POWER_STATE=1 |
| 34 | |
| 35 | ############################################################################### |
| 36 | # Force tag polling for the following technology(s). |
| 37 | # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| 38 | # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | |
| 39 | # NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | |
| 40 | # NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | |
| 41 | # NFA_TECHNOLOGY_MASK_ACTIVE |
| 42 | # |
| 43 | # Notable bits: |
| 44 | # NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ |
| 45 | # NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ |
| 46 | # NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ |
| 47 | # NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ |
| 48 | # NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ |
| 49 | # NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ |
| 50 | POLLING_TECH_MASK=0x2F |
| 51 | |
| 52 | ############################################################################### |
| 53 | # Force P2P to only listen for the following technology(s). |
| 54 | # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| 55 | # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | |
| 56 | # NFA_TECHNOLOGY_MASK_ACTIVE |
| 57 | # |
| 58 | # Notable bits: |
| 59 | # NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ |
| 60 | # NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ |
| 61 | # NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ |
| 62 | P2P_LISTEN_TECH_MASK=0x00 |
| 63 | |
| 64 | PRESERVE_STORAGE=0x01 |
| 65 | |
| 66 | ############################################################################### |
| 67 | # Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. |
| 68 | # The value is set to 3 by default as it assumes we will discover 0xF2, |
| 69 | # 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced |
| 70 | # so that the stack will not wait any longer than necessary. |
| 71 | # Maximum EE supported number |
| 72 | # NXP PN547C2 0x02 |
| 73 | # NXP PN65T 0x03 |
| 74 | # NXP PN548C2 0x02 |
| 75 | # NXP PN66T 0x03 |
| 76 | NFA_MAX_EE_SUPPORTED=0x02 |
| 77 | |
| 78 | ############################################################################### |
| 79 | # AID_MATCHING constants |
| 80 | # AID_MATCHING_EXACT_ONLY 0x00 |
| 81 | # AID_MATCHING_EXACT_OR_PREFIX 0x01 |
| 82 | # AID_MATCHING_PREFIX_ONLY 0x02 |
| 83 | # AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 |
| 84 | AID_MATCHING_MODE=0x03 |
| 85 | |
| 86 | ############################################################################### |
| 87 | #Set the default Felica T3T System Code : |
| 88 | #This settings will be used when application does not set this parameter |
| 89 | DEFAULT_SYS_CODE={FE:FE} |
| 90 | |
| 91 | ############################################################################### |
| 92 | # Value of NIC parameter NFCC_COFNIG_CONTROL |
| 93 | # 0x00 NFCC is not allowed to manage RF configuration |
| 94 | # 0x01 NFCC is allowed to manage RF configuration |
| 95 | NFCC_CONFIG_CONTROL=0x01 |
| 96 | |
| 97 | ############################################################################### |
| 98 | #Set if the AID routing should be blocked for the power modes not supported. |
| 99 | NFA_AID_BLOCK_ROUTE=1 |
| 100 | |
| 101 | ############################################################################### |
| 102 | #Set the OffHost AID supported power state: |
| 103 | OFFHOST_AID_ROUTE_PWR_STATE=0x3B |
| 104 | |
| 105 | ############################################################################### |
| 106 | # Mifare Tag implementation |
| 107 | # 0: General implementation |
| 108 | # 1: Legacy implementation |
| 109 | LEGACY_MIFARE_READER=0 |
| 110 | |
| 111 | ############################################################################### |
| 112 | # Nfc recovery implementation |
| 113 | # 0: Crash Nfc Service |
| 114 | # 1: Toggle Nfc state |
| 115 | RECOVERY_OPTION=1 |