Update nfc configurations
Bug: 182243379
Test: atest NfcNciInstrumentationTests
Change-Id: I5499e1a26c21920f2945121c0a04f4c519619049
diff --git a/nfc/libnfc-nci.conf b/nfc/libnfc-nci.conf
new file mode 100644
index 0000000..c475161
--- /dev/null
+++ b/nfc/libnfc-nci.conf
@@ -0,0 +1,108 @@
+###############################################################################
+# Application options
+NFC_DEBUG_ENABLED=0
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# Force UICC to only listen to the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
+UICC_LISTEN_TECH_MASK=0x07
+
+###############################################################################
+# AID for Empty Select command
+# If specified, this AID will be substituted when an Empty SELECT command is
+# detected. The first byte is the length of the AID. Maximum length is 16.
+AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
+
+###############################################################################
+# When screen is turned off, specify the desired power state of the controller.
+# 0: power-off-sleep state; DEFAULT
+# 1: full-power state
+# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
+SCREEN_OFF_POWER_STATE=1
+
+###############################################################################
+# Force tag polling for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
+# NFA_TECHNOLOGY_MASK_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
+# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
+# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
+# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
+# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
+# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */
+POLLING_TECH_MASK=0x2F
+
+###############################################################################
+# Force P2P to only listen for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
+# NFA_TECHNOLOGY_MASK_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
+# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
+# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */
+P2P_LISTEN_TECH_MASK=0x00
+
+PRESERVE_STORAGE=0x01
+
+###############################################################################
+# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
+# The value is set to 3 by default as it assumes we will discover 0xF2,
+# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
+# so that the stack will not wait any longer than necessary.
+# Maximum EE supported number
+# NXP PN547C2 0x02
+# NXP PN65T 0x03
+# NXP PN548C2 0x02
+# NXP PN66T 0x03
+NFA_MAX_EE_SUPPORTED=0x02
+
+###############################################################################
+# AID_MATCHING constants
+# AID_MATCHING_EXACT_ONLY 0x00
+# AID_MATCHING_EXACT_OR_PREFIX 0x01
+# AID_MATCHING_PREFIX_ONLY 0x02
+# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
+AID_MATCHING_MODE=0x03
+
+###############################################################################
+#Set the default Felica T3T System Code :
+#This settings will be used when application does not set this parameter
+DEFAULT_SYS_CODE={FE:FE}
+
+###############################################################################
+# Value of NIC parameter NFCC_COFNIG_CONTROL
+# 0x00 NFCC is not allowed to manage RF configuration
+# 0x01 NFCC is allowed to manage RF configuration
+NFCC_CONFIG_CONTROL=0x01
+
+###############################################################################
+#Set if the AID routing should be blocked for the power modes not supported.
+NFA_AID_BLOCK_ROUTE=1
+
+###############################################################################
+#Set the OffHost AID supported power state:
+OFFHOST_AID_ROUTE_PWR_STATE=0x3B
+
+###############################################################################
+# Mifare Tag implementation
+# 0: General implementation
+# 1: Legacy implementation
+LEGACY_MIFARE_READER=0
+
+###############################################################################
+# Nfc recovery implementation
+# 0: Crash Nfc Service
+# 1: Toggle Nfc state
+RECOVERY_OPTION=1