payload_generator/deflate_utils.cc

//
// Copyright (C) 2017 The Android Open Source Project
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//

#include "update_engine/payload_generator/deflate_utils.h"

#include <algorithm>
#include <string>
#include <utility>

#include <base/files/file_util.h>
#include <base/logging.h>
#include <base/strings/string_util.h>

#include "update_engine/common/utils.h"
#include "update_engine/payload_generator/delta_diff_generator.h"
#include "update_engine/payload_generator/extent_ranges.h"
#include "update_engine/payload_generator/extent_utils.h"
#include "update_engine/payload_generator/squashfs_filesystem.h"
#include "update_engine/update_metadata.pb.h"

using puffin::BitExtent;
using puffin::ByteExtent;
using std::string;
using std::vector;

namespace chromeos_update_engine {
namespace deflate_utils {
namespace {

// The minimum size for a squashfs image to be processed.
const uint64_t kMinimumSquashfsImageSize = 1 * 1024 * 1024;  // bytes

// TODO(*): Optimize this so we don't have to read all extents into memory in
// case it is large.
bool CopyExtentsToFile(const string& in_path,
                       const vector<Extent>& extents,
                       const string& out_path,
                       size_t block_size) {
  brillo::Blob data(utils::BlocksInExtents(extents) * block_size);
  TEST_AND_RETURN_FALSE(
      utils::ReadExtents(in_path, extents, &data, data.size(), block_size));
  TEST_AND_RETURN_FALSE(
      utils::WriteFile(out_path.c_str(), data.data(), data.size()));
  return true;
}

bool IsSquashfsImage(const string& part_path,
                     const FilesystemInterface::File& file) {
  // Only check for files with img postfix.
  if (base::EndsWith(file.name, ".img", base::CompareCase::SENSITIVE) &&
      utils::BlocksInExtents(file.extents) >=
          kMinimumSquashfsImageSize / kBlockSize) {
    brillo::Blob super_block;
    TEST_AND_RETURN_FALSE(
        utils::ReadFileChunk(part_path,
                             file.extents[0].start_block() * kBlockSize,
                             100,
                             &super_block));
    return SquashfsFilesystem::IsSquashfsImage(super_block);
  }
  return false;
}

bool IsRegularFile(const FilesystemInterface::File& file) {
  // If inode is 0, then stat information is invalid for some psuedo files
  if (file.file_stat.st_ino != 0 &&
      (file.file_stat.st_mode & S_IFMT) == S_IFREG) {
    return true;
  }
  return false;
}

// Realigns subfiles |files| of a splitted file |file| into its correct
// positions. This can be used for squashfs, zip, apk, etc.
bool RealignSplittedFiles(const FilesystemInterface::File& file,
                          vector<FilesystemInterface::File>* files) {
  // We have to shift all the Extents in |files|, based on the Extents of the
  // |file| itself.
  size_t num_blocks = 0;
  for (auto& in_file : *files) {  // We need to modify so no constant.
    TEST_AND_RETURN_FALSE(
        ShiftExtentsOverExtents(file.extents, &in_file.extents));
    TEST_AND_RETURN_FALSE(
        ShiftBitExtentsOverExtents(file.extents, &in_file.deflates));

    in_file.name = file.name + "/" + in_file.name;
    num_blocks += utils::BlocksInExtents(in_file.extents);
  }

  // Check that all files in |in_files| cover the entire image.
  TEST_AND_RETURN_FALSE(utils::BlocksInExtents(file.extents) == num_blocks);
  return true;
}

bool IsBitExtentInExtent(const Extent& extent, const BitExtent& bit_extent) {
  return (bit_extent.offset / 8) >= (extent.start_block() * kBlockSize) &&
         ((bit_extent.offset + bit_extent.length + 7) / 8) <=
             ((extent.start_block() + extent.num_blocks()) * kBlockSize);
}

// Returns whether the given file |name| has an extension listed in
// |extensions|.
bool IsFileExtensions(const string& name,
                      const std::initializer_list<string>& extensions) {
  return any_of(extensions.begin(), extensions.end(), [&name](const auto& ext) {
    return base::EndsWith(name, ext, base::CompareCase::INSENSITIVE_ASCII);
  });
}

}  // namespace

ByteExtent ExpandToByteExtent(const BitExtent& extent) {
  uint64_t offset = extent.offset / 8;
  uint64_t length = ((extent.offset + extent.length + 7) / 8) - offset;
  return {offset, length};
}

bool ShiftExtentsOverExtents(const vector<Extent>& base_extents,
                             vector<Extent>* over_extents) {
  if (utils::BlocksInExtents(base_extents) <
      utils::BlocksInExtents(*over_extents)) {
    LOG(ERROR) << "over_extents have more blocks than base_extents! Invalid!";
    return false;
  }
  for (size_t idx = 0; idx < over_extents->size(); idx++) {
    auto over_ext = &over_extents->at(idx);
    auto gap_blocks = base_extents[0].start_block();
    auto last_end_block = base_extents[0].start_block();
    for (auto base_ext : base_extents) {  // We need to modify |base_ext|, so we
                                          // use copy.
      gap_blocks += base_ext.start_block() - last_end_block;
      last_end_block = base_ext.start_block() + base_ext.num_blocks();
      base_ext.set_start_block(base_ext.start_block() - gap_blocks);
      if (over_ext->start_block() >= base_ext.start_block() &&
          over_ext->start_block() <
              base_ext.start_block() + base_ext.num_blocks()) {
        if (over_ext->start_block() + over_ext->num_blocks() <=
            base_ext.start_block() + base_ext.num_blocks()) {
          // |over_ext| is inside |base_ext|, increase its start block.
          over_ext->set_start_block(over_ext->start_block() + gap_blocks);
        } else {
          // |over_ext| spills over this |base_ext|, split it into two.
          auto new_blocks = base_ext.start_block() + base_ext.num_blocks() -
                            over_ext->start_block();
          vector<Extent> new_extents = {
              ExtentForRange(gap_blocks + over_ext->start_block(), new_blocks),
              ExtentForRange(over_ext->start_block() + new_blocks,
                             over_ext->num_blocks() - new_blocks)};
          *over_ext = new_extents[0];
          over_extents->insert(std::next(over_extents->begin(), idx + 1),
                               new_extents[1]);
        }
        break;  // We processed |over_ext|, so break the loop;
      }
    }
  }
  return true;
}

bool ShiftBitExtentsOverExtents(const vector<Extent>& base_extents,
                                vector<BitExtent>* over_extents) {
  if (over_extents->empty()) {
    return true;
  }

  // This check is needed to make sure the number of bytes in |over_extents|
  // does not exceed |base_extents|.
  auto last_extent = ExpandToByteExtent(over_extents->back());
  TEST_AND_RETURN_FALSE(last_extent.offset + last_extent.length <=
                        utils::BlocksInExtents(base_extents) * kBlockSize);

  for (auto o_ext = over_extents->begin(); o_ext != over_extents->end();) {
    size_t gap_blocks = base_extents[0].start_block();
    size_t last_end_block = base_extents[0].start_block();
    bool o_ext_processed = false;
    for (auto b_ext : base_extents) {  // We need to modify |b_ext|, so we copy.
      gap_blocks += b_ext.start_block() - last_end_block;
      last_end_block = b_ext.start_block() + b_ext.num_blocks();
      b_ext.set_start_block(b_ext.start_block() - gap_blocks);
      auto byte_o_ext = ExpandToByteExtent(*o_ext);
      if (byte_o_ext.offset >= b_ext.start_block() * kBlockSize &&
          byte_o_ext.offset <
              (b_ext.start_block() + b_ext.num_blocks()) * kBlockSize) {
        if ((byte_o_ext.offset + byte_o_ext.length) <=
            (b_ext.start_block() + b_ext.num_blocks()) * kBlockSize) {
          // |o_ext| is inside |b_ext|, increase its start block.
          o_ext->offset += gap_blocks * kBlockSize * 8;
          ++o_ext;
        } else {
          // |o_ext| spills over this |b_ext|, remove it.
          o_ext = over_extents->erase(o_ext);
        }
        o_ext_processed = true;
        break;  // We processed o_ext, so break the loop;
      }
    }
    TEST_AND_RETURN_FALSE(o_ext_processed);
  }
  return true;
}

vector<BitExtent> FindDeflates(const vector<Extent>& extents,
                               const vector<BitExtent>& in_deflates) {
  vector<BitExtent> result;
  // TODO(ahassani): Replace this with binary_search style search.
  for (const auto& deflate : in_deflates) {
    for (const auto& extent : extents) {
      if (IsBitExtentInExtent(extent, deflate)) {
        result.push_back(deflate);
        break;
      }
    }
  }
  return result;
}

bool CompactDeflates(const vector<Extent>& extents,
                     const vector<BitExtent>& in_deflates,
                     vector<BitExtent>* out_deflates) {
  size_t bytes_passed = 0;
  out_deflates->reserve(in_deflates.size());
  for (const auto& extent : extents) {
    size_t gap_bytes = extent.start_block() * kBlockSize - bytes_passed;
    for (const auto& deflate : in_deflates) {
      if (IsBitExtentInExtent(extent, deflate)) {
        out_deflates->emplace_back(deflate.offset - (gap_bytes * 8),
                                   deflate.length);
      }
    }
    bytes_passed += extent.num_blocks() * kBlockSize;
  }

  // All given |in_deflates| items should've been inside one of the extents in
  // |extents|.
  TEST_AND_RETURN_FALSE(in_deflates.size() == out_deflates->size());

  // Make sure all outgoing deflates are ordered and non-overlapping.
  auto result = std::adjacent_find(out_deflates->begin(),
                                   out_deflates->end(),
                                   [](const BitExtent& a, const BitExtent& b) {
                                     return (a.offset + a.length) > b.offset;
                                   });
  TEST_AND_RETURN_FALSE(result == out_deflates->end());
  return true;
}

bool FindAndCompactDeflates(const vector<Extent>& extents,
                            const vector<BitExtent>& in_deflates,
                            vector<BitExtent>* out_deflates) {
  auto found_deflates = FindDeflates(extents, in_deflates);
  TEST_AND_RETURN_FALSE(CompactDeflates(extents, found_deflates, out_deflates));
  return true;
}

bool PreprocessPartitionFiles(const PartitionConfig& part,
                              vector<FilesystemInterface::File>* result_files,
                              bool extract_deflates) {
  // Get the file system files.
  vector<FilesystemInterface::File> tmp_files;
  part.fs_interface->GetFiles(&tmp_files);
  result_files->reserve(tmp_files.size());

  for (auto& file : tmp_files) {
    auto is_regular_file = IsRegularFile(file);

    if (is_regular_file && IsSquashfsImage(part.path, file)) {
      // Read the image into a file.
      base::FilePath path;
      TEST_AND_RETURN_FALSE(base::CreateTemporaryFile(&path));
      ScopedPathUnlinker old_unlinker(path.value());
      TEST_AND_RETURN_FALSE(
          CopyExtentsToFile(part.path, file.extents, path.value(), kBlockSize));
      // Test if it is actually a Squashfs file.
      auto sqfs = SquashfsFilesystem::CreateFromFile(path.value(),
                                                     extract_deflates,
                                                     /*load_settings=*/false);
      if (sqfs) {
        // It is an squashfs file. Get its files to replace with itself.
        vector<FilesystemInterface::File> files;
        sqfs->GetFiles(&files);

        // Replace squashfs file with its files only if |files| has at least two
        // files or if it has some deflates (since it is better to replace it to
        // take advantage of the deflates.)
        if (files.size() > 1 ||
            (files.size() == 1 && !files[0].deflates.empty())) {
          TEST_AND_RETURN_FALSE(RealignSplittedFiles(file, &files));
          result_files->insert(result_files->end(), files.begin(), files.end());
          continue;
        }
      } else {
        LOG(WARNING) << "We thought file: " << file.name
                     << " was a Squashfs file, but it was not.";
      }
    }

    if (is_regular_file && extract_deflates && !file.is_compressed) {
      // Search for deflates if the file is in zip or gzip format.
      // .zvoice files may eventually move out of rootfs. If that happens,
      // remove ".zvoice" (crbug.com/782918).
      bool is_zip = IsFileExtensions(
          file.name, {".apk", ".zip", ".jar", ".zvoice", ".apex"});
      bool is_gzip = IsFileExtensions(file.name, {".gz", ".gzip", ".tgz"});
      if (is_zip || is_gzip) {
        brillo::Blob data;
        TEST_AND_RETURN_FALSE(utils::ReadExtents(
            part.path,
            file.extents,
            &data,
            kBlockSize * utils::BlocksInExtents(file.extents),
            kBlockSize));
        vector<puffin::BitExtent> deflates;
        if (is_zip) {
          TEST_AND_RETURN_FALSE(
              puffin::LocateDeflatesInZipArchive(data, &deflates));
        } else if (is_gzip) {
          TEST_AND_RETURN_FALSE(puffin::LocateDeflatesInGzip(data, &deflates));
        }
        // Shift the deflate's extent to the offset starting from the beginning
        // of the current partition; and the delta processor will align the
        // extents in a continuous buffer later.
        TEST_AND_RETURN_FALSE(
            ShiftBitExtentsOverExtents(file.extents, &deflates));
        file.deflates = std::move(deflates);
      }
    }

    result_files->push_back(file);
  }
  return true;
}

}  // namespace deflate_utils
}  // namespace chromeos_update_engine