| // | 
 | // Copyright (C) 2018 The Android Open Source Project | 
 | // | 
 | // Licensed under the Apache License, Version 2.0 (the "License"); | 
 | // you may not use this file except in compliance with the License. | 
 | // You may obtain a copy of the License at | 
 | // | 
 | //      http://www.apache.org/licenses/LICENSE-2.0 | 
 | // | 
 | // Unless required by applicable law or agreed to in writing, software | 
 | // distributed under the License is distributed on an "AS IS" BASIS, | 
 | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 | // See the License for the specific language governing permissions and | 
 | // limitations under the License. | 
 | // | 
 |  | 
 | #ifndef UPDATE_ENGINE_COMMON_DYNAMIC_PARTITION_CONTROL_INTERFACE_H_ | 
 | #define UPDATE_ENGINE_COMMON_DYNAMIC_PARTITION_CONTROL_INTERFACE_H_ | 
 |  | 
 | #include <stdint.h> | 
 |  | 
 | #include <memory> | 
 | #include <string> | 
 | #include <vector> | 
 |  | 
 | #include "update_engine/common/action.h" | 
 | #include "update_engine/common/cleanup_previous_update_action_delegate.h" | 
 | #include "update_engine/common/error_code.h" | 
 | #include "update_engine/common/prefs_interface.h" | 
 | #include "update_engine/payload_consumer/file_descriptor.h" | 
 | #include "update_engine/update_metadata.pb.h" | 
 |  | 
 | // Forware declare for libsnapshot/snapshot_writer.h | 
 | namespace android::snapshot { | 
 | class ICowWriter; | 
 | } | 
 |  | 
 | namespace chromeos_update_engine { | 
 |  | 
 | struct PartitionDevice { | 
 |   std::string rw_device_path; | 
 |   std::string readonly_device_path; | 
 |   bool is_dynamic; | 
 | }; | 
 |  | 
 | struct FeatureFlag { | 
 |   enum class Value { NONE = 0, RETROFIT, LAUNCH }; | 
 |   constexpr explicit FeatureFlag(Value value) : value_(value) {} | 
 |   constexpr bool IsEnabled() const { return value_ != Value::NONE; } | 
 |   constexpr bool IsRetrofit() const { return value_ == Value::RETROFIT; } | 
 |   constexpr bool IsLaunch() const { return value_ == Value::LAUNCH; } | 
 |  | 
 |  private: | 
 |   Value value_; | 
 | }; | 
 |  | 
 | class BootControlInterface; | 
 |  | 
 | class DynamicPartitionControlInterface { | 
 |  public: | 
 |   virtual ~DynamicPartitionControlInterface() = default; | 
 |  | 
 |   // Return the feature flags of dynamic partitions on this device. | 
 |   // Return RETROFIT iff dynamic partitions is retrofitted on this device, | 
 |   //        LAUNCH iff this device is launched with dynamic partitions, | 
 |   //        NONE iff dynamic partitions is disabled on this device. | 
 |   virtual FeatureFlag GetDynamicPartitionsFeatureFlag() = 0; | 
 |  | 
 |   // Return the feature flags of Virtual A/B on this device. | 
 |   virtual FeatureFlag GetVirtualAbFeatureFlag() = 0; | 
 |   // Return the feature flags of Virtual A/B Compression on this device. | 
 |   // This function will tell you if current device supports VABC. However, it | 
 |   // DOES NOT tell you if VABC is used for current OTA update. For that, use | 
 |   // UpdateUsesSnapshotCompression. | 
 |   virtual FeatureFlag GetVirtualAbCompressionFeatureFlag() = 0; | 
 |   // Return the feature flag for Virtual AB Compression XOR | 
 |   virtual FeatureFlag GetVirtualAbCompressionXorFeatureFlag() = 0; | 
 |   // Returns whether userspace snapshots are enabled on the device, but not | 
 |   // whether they're enabled for the update. | 
 |   virtual FeatureFlag GetVirtualAbUserspaceSnapshotsFeatureFlag() = 0; | 
 |  | 
 |   // Attempt to optimize |operation|. | 
 |   // If successful, |optimized| contains an operation with extents that | 
 |   // needs to be written. | 
 |   // If failed, no optimization is available, and caller should perform | 
 |   // |operation| directly. | 
 |   // |partition_name| should not have the slot suffix; implementation of | 
 |   // DynamicPartitionControlInterface checks partition at the target slot | 
 |   // previously set with PreparePartitionsForUpdate(). | 
 |   virtual bool OptimizeOperation(const std::string& partition_name, | 
 |                                  const InstallOperation& operation, | 
 |                                  InstallOperation* optimized) = 0; | 
 |  | 
 |   // Do necessary cleanups before destroying the object. | 
 |   virtual void Cleanup() = 0; | 
 |  | 
 |   // Prepare all partitions for an update specified in |manifest|. | 
 |   // This is needed before calling MapPartitionOnDeviceMapper(), otherwise the | 
 |   // device would be mapped in an inconsistent way. | 
 |   // If |update| is set, create snapshots and writes super partition metadata. | 
 |   // If |required_size| is not null and call fails due to insufficient space, | 
 |   // |required_size| will be set to total free space required on userdata | 
 |   // partition to apply the update. Otherwise (call succeeds, or fails | 
 |   // due to other errors), |required_size| is set to zero. | 
 |   virtual bool PreparePartitionsForUpdate(uint32_t source_slot, | 
 |                                           uint32_t target_slot, | 
 |                                           const DeltaArchiveManifest& manifest, | 
 |                                           bool update, | 
 |                                           uint64_t* required_size, | 
 |                                           ErrorCode* error = nullptr) = 0; | 
 |  | 
 |   // After writing to new partitions, before rebooting into the new slot, call | 
 |   // this function to indicate writes to new partitions are done. | 
 |   virtual bool FinishUpdate(bool powerwash_required) = 0; | 
 |  | 
 |   // Get an action to clean up previous update. | 
 |   // Return NoOpAction on non-Virtual A/B devices. | 
 |   // Before applying the next update, run this action to clean up previous | 
 |   // update files. This function blocks until delta files are merged into | 
 |   // current OS partitions and finished cleaning up. | 
 |   // - If successful, action completes with kSuccess. | 
 |   // - If any error, but caller should retry after reboot, action completes with | 
 |   //   kError. | 
 |   // - If any irrecoverable failures, action completes with kDeviceCorrupted. | 
 |   // | 
 |   // See ResetUpdate for differences between CleanuPreviousUpdateAction and | 
 |   // ResetUpdate. | 
 |   virtual std::unique_ptr<AbstractAction> GetCleanupPreviousUpdateAction( | 
 |       BootControlInterface* boot_control, | 
 |       PrefsInterface* prefs, | 
 |       CleanupPreviousUpdateActionDelegateInterface* delegate) = 0; | 
 |  | 
 |   // Called after an unwanted payload has been successfully applied and the | 
 |   // device has not yet been rebooted. | 
 |   // | 
 |   // For snapshot updates (Virtual A/B), it calls | 
 |   // DeltaPerformer::ResetUpdateProgress(false /* quick */) and | 
 |   // frees previously allocated space; the next update will need to be | 
 |   // started over. | 
 |   // | 
 |   // Note: CleanupPreviousUpdateAction does not do anything if an update is in | 
 |   // progress, while ResetUpdate() forcefully free previously | 
 |   // allocated space for snapshot updates. | 
 |   virtual bool ResetUpdate(PrefsInterface* prefs) = 0; | 
 |  | 
 |   // Reads the dynamic partitions metadata from the given slot, and puts the | 
 |   // name of the dynamic partitions with the current suffix to |partitions|. | 
 |   // Returns true on success. | 
 |   virtual bool ListDynamicPartitionsForSlot( | 
 |       uint32_t slot, | 
 |       uint32_t current_slot, | 
 |       std::vector<std::string>* partitions) = 0; | 
 |  | 
 |   // Finds a possible location that list all block devices by name; and puts | 
 |   // the result in |path|. Returns true on success. | 
 |   // Sample result: /dev/block/by-name/ | 
 |   virtual bool GetDeviceDir(std::string* path) = 0; | 
 |  | 
 |   // Verifies that the untouched dynamic partitions in the target metadata have | 
 |   // the same extents as the source metadata. | 
 |   virtual bool VerifyExtentsForUntouchedPartitions( | 
 |       uint32_t source_slot, | 
 |       uint32_t target_slot, | 
 |       const std::vector<std::string>& partitions) = 0; | 
 |   // Partition name is expected to be unsuffixed. e.g. system, vendor | 
 |   // Return an interface to write to a snapshoted partition. | 
 |   // If `is_append` is false, then existing COW data will be overwritten. | 
 |   // Otherwise the cow writer will be opened on APPEND mode, existing COW data | 
 |   // is preserved. | 
 |   virtual std::unique_ptr<android::snapshot::ICowWriter> OpenCowWriter( | 
 |       const std::string& unsuffixed_partition_name, | 
 |       const std::optional<std::string>&, | 
 |       std::optional<uint64_t> label) = 0; | 
 |   // Open a general purpose FD capable to reading and writing to COW. Note that | 
 |   // writes must be block aligned. | 
 |   virtual std::unique_ptr<FileDescriptor> OpenCowFd( | 
 |       const std::string& unsuffixed_partition_name, | 
 |       const std::optional<std::string>&, | 
 |       bool is_append = false) = 0; | 
 |  | 
 |   virtual bool IsDynamicPartition(const std::string& part_name, | 
 |                                   uint32_t slot) = 0; | 
 |  | 
 |   // Create virtual block devices for all partitions. | 
 |   virtual bool MapAllPartitions() = 0; | 
 |   // Unmap virtual block devices for all partitions. | 
 |   virtual bool UnmapAllPartitions() = 0; | 
 |  | 
 |   // Return if snapshot compression is enabled for this update. | 
 |   // This function should only be called after preparing for an update | 
 |   // (PreparePartitionsForUpdate), and before merging | 
 |   // (see GetCleanupPreviousUpdateAction and CleanupPreviousUpdateAction) or | 
 |   // resetting it (ResetUpdate). | 
 |   // | 
 |   // To know if the device supports snapshot compression by itself, use | 
 |   // GetVirtualAbCompressionFeatureFlag | 
 |   virtual bool UpdateUsesSnapshotCompression() = 0; | 
 | }; | 
 |  | 
 | }  // namespace chromeos_update_engine | 
 |  | 
 | #endif  // UPDATE_ENGINE_COMMON_DYNAMIC_PARTITION_CONTROL_INTERFACE_H_ |