|  | // | 
|  | // Copyright (C) 2018 The Android Open Source Project | 
|  | // | 
|  | // Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | // you may not use this file except in compliance with the License. | 
|  | // You may obtain a copy of the License at | 
|  | // | 
|  | //      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | // | 
|  | // Unless required by applicable law or agreed to in writing, software | 
|  | // distributed under the License is distributed on an "AS IS" BASIS, | 
|  | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | // See the License for the specific language governing permissions and | 
|  | // limitations under the License. | 
|  | // | 
|  |  | 
|  | #include "update_engine/aosp/dynamic_partition_control_android.h" | 
|  |  | 
|  | #include <algorithm> | 
|  | #include <chrono>  // NOLINT(build/c++11) - using libsnapshot / liblp API | 
|  | #include <cstdint> | 
|  | #include <map> | 
|  | #include <memory> | 
|  | #include <set> | 
|  | #include <string> | 
|  | #include <string_view> | 
|  | #include <utility> | 
|  | #include <vector> | 
|  |  | 
|  | #include <android-base/properties.h> | 
|  | #include <android-base/strings.h> | 
|  | #include <base/files/file_util.h> | 
|  | #include <base/logging.h> | 
|  | #include <base/strings/string_util.h> | 
|  | #include <base/strings/stringprintf.h> | 
|  | #include <bootloader_message/bootloader_message.h> | 
|  | #include <fs_mgr.h> | 
|  | #include <fs_mgr_dm_linear.h> | 
|  | #include <fs_mgr_overlayfs.h> | 
|  | #include <libavb/libavb.h> | 
|  | #include <libdm/dm.h> | 
|  | #include <liblp/liblp.h> | 
|  | #include <libsnapshot/cow_writer.h> | 
|  | #include <libsnapshot/snapshot.h> | 
|  | #include <libsnapshot/snapshot_stub.h> | 
|  |  | 
|  | #include "update_engine/aosp/cleanup_previous_update_action.h" | 
|  | #include "update_engine/aosp/dynamic_partition_utils.h" | 
|  | #include "update_engine/common/boot_control_interface.h" | 
|  | #include "update_engine/common/dynamic_partition_control_interface.h" | 
|  | #include "update_engine/common/error_code.h" | 
|  | #include "update_engine/common/platform_constants.h" | 
|  | #include "update_engine/common/utils.h" | 
|  | #include "update_engine/payload_consumer/cow_writer_file_descriptor.h" | 
|  | #include "update_engine/payload_consumer/delta_performer.h" | 
|  |  | 
|  | using android::base::GetBoolProperty; | 
|  | using android::base::GetProperty; | 
|  | using android::base::Join; | 
|  | using android::dm::DeviceMapper; | 
|  | using android::dm::DmDeviceState; | 
|  | using android::fs_mgr::CreateLogicalPartition; | 
|  | using android::fs_mgr::CreateLogicalPartitionParams; | 
|  | using android::fs_mgr::DestroyLogicalPartition; | 
|  | using android::fs_mgr::Fstab; | 
|  | using android::fs_mgr::MetadataBuilder; | 
|  | using android::fs_mgr::Partition; | 
|  | using android::fs_mgr::PartitionOpener; | 
|  | using android::fs_mgr::SlotSuffixForSlotNumber; | 
|  | using android::snapshot::OptimizeSourceCopyOperation; | 
|  | using android::snapshot::Return; | 
|  | using android::snapshot::SnapshotManager; | 
|  | using android::snapshot::SnapshotManagerStub; | 
|  | using android::snapshot::UpdateState; | 
|  | using base::StringPrintf; | 
|  |  | 
|  | namespace chromeos_update_engine { | 
|  |  | 
|  | constexpr char kUseDynamicPartitions[] = "ro.boot.dynamic_partitions"; | 
|  | constexpr char kRetrfoitDynamicPartitions[] = | 
|  | "ro.boot.dynamic_partitions_retrofit"; | 
|  | constexpr char kVirtualAbEnabled[] = "ro.virtual_ab.enabled"; | 
|  | constexpr char kVirtualAbRetrofit[] = "ro.virtual_ab.retrofit"; | 
|  | constexpr char kVirtualAbCompressionEnabled[] = | 
|  | "ro.virtual_ab.compression.enabled"; | 
|  | constexpr auto&& kVirtualAbCompressionXorEnabled = | 
|  | "ro.virtual_ab.compression.xor.enabled"; | 
|  | constexpr char kVirtualAbUserspaceSnapshotsEnabled[] = | 
|  | "ro.virtual_ab.userspace.snapshots.enabled"; | 
|  |  | 
|  | // Currently, android doesn't have a retrofit prop for VAB Compression. However, | 
|  | // struct FeatureFlag forces us to determine if a feature is 'retrofit'. So this | 
|  | // is here just to simplify code. Replace it with real retrofit prop name once | 
|  | // there is one. | 
|  | constexpr char kVirtualAbCompressionRetrofit[] = ""; | 
|  | constexpr char kPostinstallFstabPrefix[] = "ro.postinstall.fstab.prefix"; | 
|  | // Map timeout for dynamic partitions. | 
|  | constexpr std::chrono::milliseconds kMapTimeout{1000}; | 
|  | // Map timeout for dynamic partitions with snapshots. Since several devices | 
|  | // needs to be mapped, this timeout is longer than |kMapTimeout|. | 
|  | constexpr std::chrono::milliseconds kMapSnapshotTimeout{10000}; | 
|  |  | 
|  | DynamicPartitionControlAndroid::~DynamicPartitionControlAndroid() { | 
|  | UnmapAllPartitions(); | 
|  | metadata_device_.reset(); | 
|  | } | 
|  |  | 
|  | static FeatureFlag GetFeatureFlag(const char* enable_prop, | 
|  | const char* retrofit_prop) { | 
|  | // Default retrofit to false if retrofit_prop is empty. | 
|  | bool retrofit = retrofit_prop && retrofit_prop[0] != '\0' && | 
|  | GetBoolProperty(retrofit_prop, false); | 
|  | bool enabled = GetBoolProperty(enable_prop, false); | 
|  | if (retrofit && !enabled) { | 
|  | LOG(ERROR) << retrofit_prop << " is true but " << enable_prop | 
|  | << " is not. These sysprops are inconsistent. Assume that " | 
|  | << enable_prop << " is true from now on."; | 
|  | } | 
|  | if (retrofit) { | 
|  | return FeatureFlag(FeatureFlag::Value::RETROFIT); | 
|  | } | 
|  | if (enabled) { | 
|  | return FeatureFlag(FeatureFlag::Value::LAUNCH); | 
|  | } | 
|  | return FeatureFlag(FeatureFlag::Value::NONE); | 
|  | } | 
|  |  | 
|  | DynamicPartitionControlAndroid::DynamicPartitionControlAndroid( | 
|  | uint32_t source_slot) | 
|  | : dynamic_partitions_( | 
|  | GetFeatureFlag(kUseDynamicPartitions, kRetrfoitDynamicPartitions)), | 
|  | virtual_ab_(GetFeatureFlag(kVirtualAbEnabled, kVirtualAbRetrofit)), | 
|  | virtual_ab_compression_(GetFeatureFlag(kVirtualAbCompressionEnabled, | 
|  | kVirtualAbCompressionRetrofit)), | 
|  | virtual_ab_compression_xor_( | 
|  | GetFeatureFlag(kVirtualAbCompressionXorEnabled, "")), | 
|  | virtual_ab_userspace_snapshots_( | 
|  | GetFeatureFlag(kVirtualAbUserspaceSnapshotsEnabled, nullptr)), | 
|  | source_slot_(source_slot) { | 
|  | if (GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | snapshot_ = SnapshotManager::New(); | 
|  | } else { | 
|  | snapshot_ = SnapshotManagerStub::New(); | 
|  | } | 
|  | CHECK(snapshot_ != nullptr) << "Cannot initialize SnapshotManager."; | 
|  | } | 
|  |  | 
|  | FeatureFlag DynamicPartitionControlAndroid::GetDynamicPartitionsFeatureFlag() { | 
|  | return dynamic_partitions_; | 
|  | } | 
|  |  | 
|  | FeatureFlag DynamicPartitionControlAndroid::GetVirtualAbFeatureFlag() { | 
|  | return virtual_ab_; | 
|  | } | 
|  |  | 
|  | FeatureFlag | 
|  | DynamicPartitionControlAndroid::GetVirtualAbCompressionFeatureFlag() { | 
|  | if constexpr (constants::kIsRecovery) { | 
|  | // Don't attempt VABC in recovery | 
|  | return FeatureFlag(FeatureFlag::Value::NONE); | 
|  | } | 
|  | return virtual_ab_compression_; | 
|  | } | 
|  |  | 
|  | FeatureFlag | 
|  | DynamicPartitionControlAndroid::GetVirtualAbCompressionXorFeatureFlag() { | 
|  | return virtual_ab_compression_xor_; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::OptimizeOperation( | 
|  | const std::string& partition_name, | 
|  | const InstallOperation& operation, | 
|  | InstallOperation* optimized) { | 
|  | switch (operation.type()) { | 
|  | case InstallOperation::SOURCE_COPY: | 
|  | return target_supports_snapshot_ && | 
|  | GetVirtualAbFeatureFlag().IsEnabled() && | 
|  | mapped_devices_.count(partition_name + | 
|  | SlotSuffixForSlotNumber(target_slot_)) > 0 && | 
|  | OptimizeSourceCopyOperation(operation, optimized); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::MapPartitionInternal( | 
|  | const std::string& super_device, | 
|  | const std::string& target_partition_name, | 
|  | uint32_t slot, | 
|  | bool force_writable, | 
|  | std::string* path) { | 
|  | CreateLogicalPartitionParams params = { | 
|  | .block_device = super_device, | 
|  | .metadata_slot = slot, | 
|  | .partition_name = target_partition_name, | 
|  | .force_writable = force_writable, | 
|  | }; | 
|  | bool success = false; | 
|  | if (GetVirtualAbFeatureFlag().IsEnabled() && target_supports_snapshot_ && | 
|  | force_writable && ExpectMetadataMounted()) { | 
|  | // Only target partitions are mapped with force_writable. On Virtual | 
|  | // A/B devices, target partitions may overlap with source partitions, so | 
|  | // they must be mapped with snapshot. | 
|  | // One exception is when /metadata is not mounted. Fallback to | 
|  | // CreateLogicalPartition as snapshots are not created in the first place. | 
|  | params.timeout_ms = kMapSnapshotTimeout; | 
|  | success = snapshot_->MapUpdateSnapshot(params, path); | 
|  | } else { | 
|  | params.timeout_ms = kMapTimeout; | 
|  | success = CreateLogicalPartition(params, path); | 
|  | } | 
|  |  | 
|  | if (!success) { | 
|  | LOG(ERROR) << "Cannot map " << target_partition_name << " in " | 
|  | << super_device << " on device mapper."; | 
|  | return false; | 
|  | } | 
|  | LOG(INFO) << "Succesfully mapped " << target_partition_name | 
|  | << " to device mapper (force_writable = " << force_writable | 
|  | << "); device path at " << *path; | 
|  | mapped_devices_.insert(target_partition_name); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::MapPartitionOnDeviceMapper( | 
|  | const std::string& super_device, | 
|  | const std::string& target_partition_name, | 
|  | uint32_t slot, | 
|  | bool force_writable, | 
|  | std::string* path) { | 
|  | DmDeviceState state = GetState(target_partition_name); | 
|  | if (state == DmDeviceState::ACTIVE) { | 
|  | if (mapped_devices_.find(target_partition_name) != mapped_devices_.end()) { | 
|  | if (GetDmDevicePathByName(target_partition_name, path)) { | 
|  | LOG(INFO) << target_partition_name | 
|  | << " is mapped on device mapper: " << *path; | 
|  | return true; | 
|  | } | 
|  | LOG(ERROR) << target_partition_name << " is mapped but path is unknown."; | 
|  | return false; | 
|  | } | 
|  | // If target_partition_name is not in mapped_devices_ but state is ACTIVE, | 
|  | // the device might be mapped incorrectly before. Attempt to unmap it. | 
|  | // Note that for source partitions, if GetState() == ACTIVE, callers (e.g. | 
|  | // BootControlAndroid) should not call MapPartitionOnDeviceMapper, but | 
|  | // should directly call GetDmDevicePathByName. | 
|  | if (!UnmapPartitionOnDeviceMapper(target_partition_name)) { | 
|  | LOG(ERROR) << target_partition_name | 
|  | << " is mapped before the update, and it cannot be unmapped."; | 
|  | return false; | 
|  | } | 
|  | state = GetState(target_partition_name); | 
|  | if (state != DmDeviceState::INVALID) { | 
|  | LOG(ERROR) << target_partition_name << " is unmapped but state is " | 
|  | << static_cast<std::underlying_type_t<DmDeviceState>>(state); | 
|  | return false; | 
|  | } | 
|  | } | 
|  | if (state == DmDeviceState::INVALID) { | 
|  | return MapPartitionInternal( | 
|  | super_device, target_partition_name, slot, force_writable, path); | 
|  | } | 
|  |  | 
|  | LOG(ERROR) << target_partition_name | 
|  | << " is mapped on device mapper but state is unknown: " | 
|  | << static_cast<std::underlying_type_t<DmDeviceState>>(state); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::UnmapPartitionOnDeviceMapper( | 
|  | const std::string& target_partition_name) { | 
|  | if (DeviceMapper::Instance().GetState(target_partition_name) != | 
|  | DmDeviceState::INVALID) { | 
|  | // Partitions at target slot on non-Virtual A/B devices are mapped as | 
|  | // dm-linear. Also, on Virtual A/B devices, system_other may be mapped for | 
|  | // preopt apps as dm-linear. | 
|  | // Call DestroyLogicalPartition to handle these cases. | 
|  | bool success = DestroyLogicalPartition(target_partition_name); | 
|  |  | 
|  | // On a Virtual A/B device, |target_partition_name| may be a leftover from | 
|  | // a paused update. Clean up any underlying devices. | 
|  | if (ExpectMetadataMounted()) { | 
|  | success &= snapshot_->UnmapUpdateSnapshot(target_partition_name); | 
|  | } else { | 
|  | LOG(INFO) << "Skip UnmapUpdateSnapshot(" << target_partition_name | 
|  | << ") because metadata is not mounted"; | 
|  | } | 
|  |  | 
|  | if (!success) { | 
|  | LOG(ERROR) << "Cannot unmap " << target_partition_name | 
|  | << " from device mapper."; | 
|  | return false; | 
|  | } | 
|  | LOG(INFO) << "Successfully unmapped " << target_partition_name | 
|  | << " from device mapper."; | 
|  | } | 
|  | mapped_devices_.erase(target_partition_name); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::UnmapAllPartitions() { | 
|  | snapshot_->UnmapAllSnapshots(); | 
|  | if (mapped_devices_.empty()) { | 
|  | return false; | 
|  | } | 
|  | // UnmapPartitionOnDeviceMapper removes objects from mapped_devices_, hence | 
|  | // a copy is needed for the loop. | 
|  | std::set<std::string> mapped = mapped_devices_; | 
|  | LOG(INFO) << "Destroying [" << Join(mapped, ", ") << "] from device mapper"; | 
|  | for (const auto& partition_name : mapped) { | 
|  | ignore_result(UnmapPartitionOnDeviceMapper(partition_name)); | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | void DynamicPartitionControlAndroid::Cleanup() { | 
|  | UnmapAllPartitions(); | 
|  | metadata_device_.reset(); | 
|  | if (GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | snapshot_ = SnapshotManager::New(); | 
|  | } else { | 
|  | snapshot_ = SnapshotManagerStub::New(); | 
|  | } | 
|  | CHECK(snapshot_ != nullptr) << "Cannot initialize SnapshotManager."; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::DeviceExists(const std::string& path) { | 
|  | return base::PathExists(base::FilePath(path)); | 
|  | } | 
|  |  | 
|  | android::dm::DmDeviceState DynamicPartitionControlAndroid::GetState( | 
|  | const std::string& name) { | 
|  | return DeviceMapper::Instance().GetState(name); | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::GetDmDevicePathByName( | 
|  | const std::string& name, std::string* path) { | 
|  | return DeviceMapper::Instance().GetDmDevicePathByName(name, path); | 
|  | } | 
|  |  | 
|  | std::unique_ptr<MetadataBuilder> | 
|  | DynamicPartitionControlAndroid::LoadMetadataBuilder( | 
|  | const std::string& super_device, uint32_t slot) { | 
|  | auto builder = MetadataBuilder::New(PartitionOpener(), super_device, slot); | 
|  | if (builder == nullptr) { | 
|  | LOG(WARNING) << "No metadata slot " << BootControlInterface::SlotName(slot) | 
|  | << " in " << super_device; | 
|  | return nullptr; | 
|  | } | 
|  | LOG(INFO) << "Loaded metadata from slot " | 
|  | << BootControlInterface::SlotName(slot) << " in " << super_device; | 
|  | return builder; | 
|  | } | 
|  |  | 
|  | std::unique_ptr<MetadataBuilder> | 
|  | DynamicPartitionControlAndroid::LoadMetadataBuilder( | 
|  | const std::string& super_device, | 
|  | uint32_t source_slot, | 
|  | uint32_t target_slot) { | 
|  | bool always_keep_source_slot = !target_supports_snapshot_; | 
|  | auto builder = MetadataBuilder::NewForUpdate(PartitionOpener(), | 
|  | super_device, | 
|  | source_slot, | 
|  | target_slot, | 
|  | always_keep_source_slot); | 
|  | if (builder == nullptr) { | 
|  | LOG(WARNING) << "No metadata slot " | 
|  | << BootControlInterface::SlotName(source_slot) << " in " | 
|  | << super_device; | 
|  | return nullptr; | 
|  | } | 
|  | LOG(INFO) << "Created metadata for new update from slot " | 
|  | << BootControlInterface::SlotName(source_slot) << " in " | 
|  | << super_device; | 
|  | return builder; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::StoreMetadata( | 
|  | const std::string& super_device, | 
|  | MetadataBuilder* builder, | 
|  | uint32_t target_slot) { | 
|  | auto metadata = builder->Export(); | 
|  | if (metadata == nullptr) { | 
|  | LOG(ERROR) << "Cannot export metadata to slot " | 
|  | << BootControlInterface::SlotName(target_slot) << " in " | 
|  | << super_device; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (GetDynamicPartitionsFeatureFlag().IsRetrofit()) { | 
|  | if (!FlashPartitionTable(super_device, *metadata)) { | 
|  | LOG(ERROR) << "Cannot write metadata to " << super_device; | 
|  | return false; | 
|  | } | 
|  | LOG(INFO) << "Written metadata to " << super_device; | 
|  | } else { | 
|  | if (!UpdatePartitionTable(super_device, *metadata, target_slot)) { | 
|  | LOG(ERROR) << "Cannot write metadata to slot " | 
|  | << BootControlInterface::SlotName(target_slot) << " in " | 
|  | << super_device; | 
|  | return false; | 
|  | } | 
|  | LOG(INFO) << "Copied metadata to slot " | 
|  | << BootControlInterface::SlotName(target_slot) << " in " | 
|  | << super_device; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::GetDeviceDir(std::string* out) { | 
|  | // We can't use fs_mgr to look up |partition_name| because fstab | 
|  | // doesn't list every slot partition (it uses the slotselect option | 
|  | // to mask the suffix). | 
|  | // | 
|  | // We can however assume that there's an entry for the /misc mount | 
|  | // point and use that to get the device file for the misc | 
|  | // partition. This helps us locate the disk that |partition_name| | 
|  | // resides on. From there we'll assume that a by-name scheme is used | 
|  | // so we can just replace the trailing "misc" by the given | 
|  | // |partition_name| and suffix corresponding to |slot|, e.g. | 
|  | // | 
|  | //   /dev/block/platform/soc.0/7824900.sdhci/by-name/misc -> | 
|  | //   /dev/block/platform/soc.0/7824900.sdhci/by-name/boot_a | 
|  | // | 
|  | // If needed, it's possible to relax the by-name assumption in the | 
|  | // future by trawling /sys/block looking for the appropriate sibling | 
|  | // of misc and then finding an entry in /dev matching the sysfs | 
|  | // entry. | 
|  |  | 
|  | std::string err, misc_device = get_bootloader_message_blk_device(&err); | 
|  | if (misc_device.empty()) { | 
|  | LOG(ERROR) << "Unable to get misc block device: " << err; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (!utils::IsSymlink(misc_device.c_str())) { | 
|  | LOG(ERROR) << "Device file " << misc_device << " for /misc " | 
|  | << "is not a symlink."; | 
|  | return false; | 
|  | } | 
|  | *out = base::FilePath(misc_device).DirName().value(); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::PreparePartitionsForUpdate( | 
|  | uint32_t source_slot, | 
|  | uint32_t target_slot, | 
|  | const DeltaArchiveManifest& manifest, | 
|  | bool update, | 
|  | uint64_t* required_size, | 
|  | ErrorCode* error) { | 
|  | source_slot_ = source_slot; | 
|  | target_slot_ = target_slot; | 
|  | if (required_size != nullptr) { | 
|  | *required_size = 0; | 
|  | } | 
|  |  | 
|  | if (fs_mgr_overlayfs_is_setup()) { | 
|  | // Non DAP devices can use overlayfs as well. | 
|  | LOG(ERROR) | 
|  | << "overlayfs overrides are active and can interfere with our " | 
|  | "resources.\n" | 
|  | << "run adb enable-verity to deactivate if required and try again."; | 
|  | if (error) { | 
|  | *error = ErrorCode::kOverlayfsenabledError; | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | // If metadata is erased but not formatted, it is possible to not mount | 
|  | // it in recovery. It is acceptable to skip mounting and choose fallback path | 
|  | // (PrepareDynamicPartitionsForUpdate) when sideloading full OTAs. | 
|  | TEST_AND_RETURN_FALSE(EnsureMetadataMounted() || IsRecovery()); | 
|  |  | 
|  | if (update) { | 
|  | TEST_AND_RETURN_FALSE(EraseSystemOtherAvbFooter(source_slot, target_slot)); | 
|  | } | 
|  |  | 
|  | if (!GetDynamicPartitionsFeatureFlag().IsEnabled()) { | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (target_slot == source_slot) { | 
|  | LOG(ERROR) << "Cannot call PreparePartitionsForUpdate on current slot."; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (!SetTargetBuildVars(manifest)) { | 
|  | return false; | 
|  | } | 
|  | for (auto& list : dynamic_partition_list_) { | 
|  | list.clear(); | 
|  | } | 
|  |  | 
|  | // Although the current build supports dynamic partitions, the given payload | 
|  | // doesn't use it for target partitions. This could happen when applying a | 
|  | // retrofit update. Skip updating the partition metadata for the target slot. | 
|  | if (!is_target_dynamic_) { | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (!update) | 
|  | return true; | 
|  |  | 
|  | bool delete_source = false; | 
|  |  | 
|  | if (GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | // On Virtual A/B device, either CancelUpdate() or BeginUpdate() must be | 
|  | // called before calling UnmapUpdateSnapshot. | 
|  | // - If target_supports_snapshot_, PrepareSnapshotPartitionsForUpdate() | 
|  | //   calls BeginUpdate() which resets update state | 
|  | // - If !target_supports_snapshot_ or PrepareSnapshotPartitionsForUpdate | 
|  | //   failed in recovery, explicitly CancelUpdate(). | 
|  | if (target_supports_snapshot_) { | 
|  | if (PrepareSnapshotPartitionsForUpdate( | 
|  | source_slot, target_slot, manifest, required_size)) { | 
|  | return true; | 
|  | } | 
|  |  | 
|  | // Virtual A/B device doing Virtual A/B update in Android mode must use | 
|  | // snapshots. | 
|  | if (!IsRecovery()) { | 
|  | LOG(ERROR) << "PrepareSnapshotPartitionsForUpdate failed in Android " | 
|  | << "mode"; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | delete_source = true; | 
|  | LOG(INFO) << "PrepareSnapshotPartitionsForUpdate failed in recovery. " | 
|  | << "Attempt to overwrite existing partitions if possible"; | 
|  | } else { | 
|  | // Downgrading to an non-Virtual A/B build or is secondary OTA. | 
|  | LOG(INFO) << "Using regular A/B on Virtual A/B because package disabled " | 
|  | << "snapshots."; | 
|  | } | 
|  |  | 
|  | // In recovery, if /metadata is not mounted, it is likely that metadata | 
|  | // partition is erased and not formatted yet. After sideloading, when | 
|  | // rebooting into the new version, init will erase metadata partition, | 
|  | // hence the failure of CancelUpdate() can be ignored here. | 
|  | // However, if metadata is mounted and CancelUpdate fails, sideloading | 
|  | // should not proceed because during next boot, snapshots will overlay on | 
|  | // the devices incorrectly. | 
|  | if (ExpectMetadataMounted()) { | 
|  | TEST_AND_RETURN_FALSE(snapshot_->CancelUpdate()); | 
|  | } else { | 
|  | LOG(INFO) << "Skip canceling previous update because metadata is not " | 
|  | << "mounted"; | 
|  | } | 
|  | } | 
|  |  | 
|  | // TODO(xunchang) support partial update on non VAB enabled devices. | 
|  | TEST_AND_RETURN_FALSE(PrepareDynamicPartitionsForUpdate( | 
|  | source_slot, target_slot, manifest, delete_source)); | 
|  |  | 
|  | if (required_size != nullptr) { | 
|  | *required_size = 0; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::SetTargetBuildVars( | 
|  | const DeltaArchiveManifest& manifest) { | 
|  | // Precondition: current build supports dynamic partition. | 
|  | CHECK(GetDynamicPartitionsFeatureFlag().IsEnabled()); | 
|  |  | 
|  | bool is_target_dynamic = | 
|  | !manifest.dynamic_partition_metadata().groups().empty(); | 
|  | bool target_supports_snapshot = | 
|  | manifest.dynamic_partition_metadata().snapshot_enabled(); | 
|  |  | 
|  | if (manifest.partial_update()) { | 
|  | // Partial updates requires DAP. On partial updates that does not involve | 
|  | // dynamic partitions, groups() can be empty, so also assume | 
|  | // is_target_dynamic in this case. This assumption should be safe because we | 
|  | // also check target_supports_snapshot below, which presumably also implies | 
|  | // target build supports dynamic partition. | 
|  | if (!is_target_dynamic) { | 
|  | LOG(INFO) << "Assuming target build supports dynamic partitions for " | 
|  | "partial updates."; | 
|  | is_target_dynamic = true; | 
|  | } | 
|  |  | 
|  | // Partial updates requires Virtual A/B. Double check that both current | 
|  | // build and target build supports Virtual A/B. | 
|  | if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | LOG(ERROR) << "Partial update cannot be applied on a device that does " | 
|  | "not support snapshots."; | 
|  | return false; | 
|  | } | 
|  | if (!target_supports_snapshot) { | 
|  | LOG(ERROR) << "Cannot apply partial update to a build that does not " | 
|  | "support snapshots."; | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | // Store the flags. | 
|  | is_target_dynamic_ = is_target_dynamic; | 
|  | // If !is_target_dynamic_, leave target_supports_snapshot_ unset because | 
|  | // snapshots would not work without dynamic partition. | 
|  | if (is_target_dynamic_) { | 
|  | target_supports_snapshot_ = target_supports_snapshot; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | namespace { | 
|  | // Try our best to erase AVB footer. | 
|  | class AvbFooterEraser { | 
|  | public: | 
|  | explicit AvbFooterEraser(const std::string& path) : path_(path) {} | 
|  | bool Erase() { | 
|  | // Try to mark the block device read-only. Ignore any | 
|  | // failure since this won't work when passing regular files. | 
|  | ignore_result(utils::SetBlockDeviceReadOnly(path_, false /* readonly */)); | 
|  |  | 
|  | fd_.reset(new EintrSafeFileDescriptor()); | 
|  | int flags = O_WRONLY | O_TRUNC | O_CLOEXEC | O_SYNC; | 
|  | TEST_AND_RETURN_FALSE(fd_->Open(path_.c_str(), flags)); | 
|  |  | 
|  | // Need to write end-AVB_FOOTER_SIZE to end. | 
|  | static_assert(AVB_FOOTER_SIZE > 0); | 
|  | off64_t offset = fd_->Seek(-AVB_FOOTER_SIZE, SEEK_END); | 
|  | TEST_AND_RETURN_FALSE_ERRNO(offset >= 0); | 
|  | uint64_t write_size = AVB_FOOTER_SIZE; | 
|  | LOG(INFO) << "Zeroing " << path_ << " @ [" << offset << ", " | 
|  | << (offset + write_size) << "] (" << write_size << " bytes)"; | 
|  | brillo::Blob zeros(write_size); | 
|  | TEST_AND_RETURN_FALSE(utils::WriteAll(fd_, zeros.data(), zeros.size())); | 
|  | return true; | 
|  | } | 
|  | ~AvbFooterEraser() { | 
|  | TEST_AND_RETURN(fd_ != nullptr && fd_->IsOpen()); | 
|  | if (!fd_->Close()) { | 
|  | LOG(WARNING) << "Failed to close fd for " << path_; | 
|  | } | 
|  | } | 
|  |  | 
|  | private: | 
|  | std::string path_; | 
|  | FileDescriptorPtr fd_; | 
|  | }; | 
|  |  | 
|  | }  // namespace | 
|  |  | 
|  | std::optional<bool> | 
|  | DynamicPartitionControlAndroid::IsAvbEnabledOnSystemOther() { | 
|  | auto prefix = GetProperty(kPostinstallFstabPrefix, ""); | 
|  | if (prefix.empty()) { | 
|  | LOG(WARNING) << "Cannot get " << kPostinstallFstabPrefix; | 
|  | return std::nullopt; | 
|  | } | 
|  | auto path = base::FilePath(prefix).Append("etc/fstab.postinstall").value(); | 
|  | return IsAvbEnabledInFstab(path); | 
|  | } | 
|  |  | 
|  | std::optional<bool> DynamicPartitionControlAndroid::IsAvbEnabledInFstab( | 
|  | const std::string& path) { | 
|  | Fstab fstab; | 
|  | if (!ReadFstabFromFile(path, &fstab)) { | 
|  | PLOG(WARNING) << "Cannot read fstab from " << path; | 
|  | if (errno == ENOENT) { | 
|  | return false; | 
|  | } | 
|  | return std::nullopt; | 
|  | } | 
|  | for (const auto& entry : fstab) { | 
|  | if (!entry.avb_keys.empty()) { | 
|  | return true; | 
|  | } | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::GetSystemOtherPath( | 
|  | uint32_t source_slot, | 
|  | uint32_t target_slot, | 
|  | const std::string& partition_name_suffix, | 
|  | std::string* path, | 
|  | bool* should_unmap) { | 
|  | path->clear(); | 
|  | *should_unmap = false; | 
|  |  | 
|  | // Check that AVB is enabled on system_other before erasing. | 
|  | auto has_avb = IsAvbEnabledOnSystemOther(); | 
|  | TEST_AND_RETURN_FALSE(has_avb.has_value()); | 
|  | if (!has_avb.value()) { | 
|  | LOG(INFO) << "AVB is not enabled on system_other. Skip erasing."; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (!IsRecovery()) { | 
|  | // Found unexpected avb_keys for system_other on devices retrofitting | 
|  | // dynamic partitions. Previous crash in update_engine may leave logical | 
|  | // partitions mapped on physical system_other partition. It is difficult to | 
|  | // handle these cases. Just fail. | 
|  | if (GetDynamicPartitionsFeatureFlag().IsRetrofit()) { | 
|  | LOG(ERROR) << "Cannot erase AVB footer on system_other on devices with " | 
|  | << "retrofit dynamic partitions. They should not have AVB " | 
|  | << "enabled on system_other."; | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | std::string device_dir_str; | 
|  | TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
|  | base::FilePath device_dir(device_dir_str); | 
|  |  | 
|  | // On devices without dynamic partition, search for static partitions. | 
|  | if (!GetDynamicPartitionsFeatureFlag().IsEnabled()) { | 
|  | *path = device_dir.Append(partition_name_suffix).value(); | 
|  | TEST_AND_RETURN_FALSE(DeviceExists(*path)); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | auto source_super_device = | 
|  | device_dir.Append(GetSuperPartitionName(source_slot)).value(); | 
|  |  | 
|  | auto builder = LoadMetadataBuilder(source_super_device, source_slot); | 
|  | if (builder == nullptr) { | 
|  | if (IsRecovery()) { | 
|  | // It might be corrupted for some reason. It should still be able to | 
|  | // sideload. | 
|  | LOG(WARNING) << "Super partition metadata cannot be read from the source " | 
|  | << "slot, skip erasing."; | 
|  | return true; | 
|  | } else { | 
|  | // Device has booted into Android mode, indicating that the super | 
|  | // partition metadata should be there. | 
|  | LOG(ERROR) << "Super partition metadata cannot be read from the source " | 
|  | << "slot. This is unexpected on devices with dynamic " | 
|  | << "partitions enabled."; | 
|  | return false; | 
|  | } | 
|  | } | 
|  | auto p = builder->FindPartition(partition_name_suffix); | 
|  | if (p == nullptr) { | 
|  | // If the source slot is flashed without system_other, it does not exist | 
|  | // in super partition metadata at source slot. It is safe to skip it. | 
|  | LOG(INFO) << "Can't find " << partition_name_suffix | 
|  | << " in metadata source slot, skip erasing."; | 
|  | return true; | 
|  | } | 
|  | // System_other created by flashing tools should be erased. | 
|  | // If partition is created by update_engine (via NewForUpdate), it is a | 
|  | // left-over partition from the previous update and does not contain | 
|  | // system_other, hence there is no need to erase. | 
|  | // Note the reverse is not necessary true. If the flag is not set, we don't | 
|  | // know if the partition is created by update_engine or by flashing tools | 
|  | // because older versions of super partition metadata does not contain this | 
|  | // flag. It is okay to erase the AVB footer anyways. | 
|  | if (p->attributes() & LP_PARTITION_ATTR_UPDATED) { | 
|  | LOG(INFO) << partition_name_suffix | 
|  | << " does not contain system_other, skip erasing."; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (p->size() < AVB_FOOTER_SIZE) { | 
|  | LOG(INFO) << partition_name_suffix << " has length " << p->size() | 
|  | << "( < AVB_FOOTER_SIZE " << AVB_FOOTER_SIZE | 
|  | << "), skip erasing."; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | // Delete any pre-existing device with name |partition_name_suffix| and | 
|  | // also remove it from |mapped_devices_|. | 
|  | // In recovery, metadata might not be mounted, and | 
|  | // UnmapPartitionOnDeviceMapper might fail. However, | 
|  | // it is unusual that system_other has already been mapped. Hence, just skip. | 
|  | TEST_AND_RETURN_FALSE(UnmapPartitionOnDeviceMapper(partition_name_suffix)); | 
|  | // Use CreateLogicalPartition directly to avoid mapping with existing | 
|  | // snapshots. | 
|  | CreateLogicalPartitionParams params = { | 
|  | .block_device = source_super_device, | 
|  | .metadata_slot = source_slot, | 
|  | .partition_name = partition_name_suffix, | 
|  | .force_writable = true, | 
|  | .timeout_ms = kMapTimeout, | 
|  | }; | 
|  | TEST_AND_RETURN_FALSE(CreateLogicalPartition(params, path)); | 
|  | *should_unmap = true; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::EraseSystemOtherAvbFooter( | 
|  | uint32_t source_slot, uint32_t target_slot) { | 
|  | LOG(INFO) << "Erasing AVB footer of system_other partition before update."; | 
|  |  | 
|  | const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); | 
|  | const std::string partition_name_suffix = "system" + target_suffix; | 
|  |  | 
|  | std::string path; | 
|  | bool should_unmap = false; | 
|  |  | 
|  | TEST_AND_RETURN_FALSE(GetSystemOtherPath( | 
|  | source_slot, target_slot, partition_name_suffix, &path, &should_unmap)); | 
|  |  | 
|  | if (path.empty()) { | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ret = AvbFooterEraser(path).Erase(); | 
|  |  | 
|  | // Delete |partition_name_suffix| from device mapper and from | 
|  | // |mapped_devices_| again so that it does not interfere with update process. | 
|  | // In recovery, metadata might not be mounted, and | 
|  | // UnmapPartitionOnDeviceMapper might fail. However, DestroyLogicalPartition | 
|  | // should be called. If DestroyLogicalPartition does fail, it is still okay | 
|  | // to skip the error here and let Prepare*() fail later. | 
|  | if (should_unmap) { | 
|  | TEST_AND_RETURN_FALSE(UnmapPartitionOnDeviceMapper(partition_name_suffix)); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::PrepareDynamicPartitionsForUpdate( | 
|  | uint32_t source_slot, | 
|  | uint32_t target_slot, | 
|  | const DeltaArchiveManifest& manifest, | 
|  | bool delete_source) { | 
|  | const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); | 
|  |  | 
|  | // Unmap all the target dynamic partitions because they would become | 
|  | // inconsistent with the new metadata. | 
|  | for (const auto& group : manifest.dynamic_partition_metadata().groups()) { | 
|  | for (const auto& partition_name : group.partition_names()) { | 
|  | if (!UnmapPartitionOnDeviceMapper(partition_name + target_suffix)) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | std::string device_dir_str; | 
|  | TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
|  | base::FilePath device_dir(device_dir_str); | 
|  | auto source_device = | 
|  | device_dir.Append(GetSuperPartitionName(source_slot)).value(); | 
|  |  | 
|  | auto builder = LoadMetadataBuilder(source_device, source_slot, target_slot); | 
|  | if (builder == nullptr) { | 
|  | LOG(ERROR) << "No metadata at " | 
|  | << BootControlInterface::SlotName(source_slot); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (delete_source) { | 
|  | TEST_AND_RETURN_FALSE( | 
|  | DeleteSourcePartitions(builder.get(), source_slot, manifest)); | 
|  | } | 
|  |  | 
|  | TEST_AND_RETURN_FALSE( | 
|  | UpdatePartitionMetadata(builder.get(), target_slot, manifest)); | 
|  |  | 
|  | auto target_device = | 
|  | device_dir.Append(GetSuperPartitionName(target_slot)).value(); | 
|  |  | 
|  | return StoreMetadata(target_device, builder.get(), target_slot); | 
|  | } | 
|  |  | 
|  | DynamicPartitionControlAndroid::SpaceLimit | 
|  | DynamicPartitionControlAndroid::GetSpaceLimit(bool use_snapshot) { | 
|  | // On device retrofitting dynamic partitions, allocatable_space = "super", | 
|  | // where "super" is the sum of all block devices for that slot. Since block | 
|  | // devices are dedicated for the corresponding slot, there's no need to halve | 
|  | // the allocatable space. | 
|  | if (GetDynamicPartitionsFeatureFlag().IsRetrofit()) | 
|  | return SpaceLimit::ERROR_IF_EXCEEDED_SUPER; | 
|  |  | 
|  | // On device launching dynamic partitions w/o VAB, regardless of recovery | 
|  | // sideload, super partition must be big enough to hold both A and B slots of | 
|  | // groups. Hence, | 
|  | // allocatable_space = super / 2 | 
|  | if (!GetVirtualAbFeatureFlag().IsEnabled()) | 
|  | return SpaceLimit::ERROR_IF_EXCEEDED_HALF_OF_SUPER; | 
|  |  | 
|  | // Source build supports VAB. Super partition must be big enough to hold | 
|  | // one slot of groups (ERROR_IF_EXCEEDED_SUPER). However, there are cases | 
|  | // where additional warning messages needs to be written. | 
|  |  | 
|  | // If using snapshot updates, implying that target build also uses VAB, | 
|  | // allocatable_space = super | 
|  | if (use_snapshot) | 
|  | return SpaceLimit::ERROR_IF_EXCEEDED_SUPER; | 
|  |  | 
|  | // Source build supports VAB but not using snapshot updates. There are | 
|  | // several cases, as listed below. | 
|  | // Sideloading: allocatable_space = super. | 
|  | if (IsRecovery()) | 
|  | return SpaceLimit::ERROR_IF_EXCEEDED_SUPER; | 
|  |  | 
|  | // On launch VAB device, this implies secondary payload. | 
|  | // Technically, we don't have to check anything, but sum(groups) < super | 
|  | // still applies. | 
|  | if (!GetVirtualAbFeatureFlag().IsRetrofit()) | 
|  | return SpaceLimit::ERROR_IF_EXCEEDED_SUPER; | 
|  |  | 
|  | // On retrofit VAB device, either of the following: | 
|  | // - downgrading: allocatable_space = super / 2 | 
|  | // - secondary payload: don't check anything | 
|  | // These two cases are indistinguishable, | 
|  | // hence emit warning if sum(groups) > super / 2 | 
|  | return SpaceLimit::WARN_IF_EXCEEDED_HALF_OF_SUPER; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::CheckSuperPartitionAllocatableSpace( | 
|  | android::fs_mgr::MetadataBuilder* builder, | 
|  | const DeltaArchiveManifest& manifest, | 
|  | bool use_snapshot) { | 
|  | uint64_t sum_groups = 0; | 
|  | for (const auto& group : manifest.dynamic_partition_metadata().groups()) { | 
|  | sum_groups += group.size(); | 
|  | } | 
|  |  | 
|  | uint64_t full_space = builder->AllocatableSpace(); | 
|  | uint64_t half_space = full_space / 2; | 
|  | constexpr const char* fmt = | 
|  | "The maximum size of all groups for the target slot (%" PRIu64 | 
|  | ") has exceeded %sallocatable space for dynamic partitions %" PRIu64 "."; | 
|  | switch (GetSpaceLimit(use_snapshot)) { | 
|  | case SpaceLimit::ERROR_IF_EXCEEDED_HALF_OF_SUPER: { | 
|  | if (sum_groups > half_space) { | 
|  | LOG(ERROR) << StringPrintf(fmt, sum_groups, "HALF OF ", half_space); | 
|  | return false; | 
|  | } | 
|  | // If test passes, it implies that the following two conditions also pass. | 
|  | break; | 
|  | } | 
|  | case SpaceLimit::WARN_IF_EXCEEDED_HALF_OF_SUPER: { | 
|  | if (sum_groups > half_space) { | 
|  | LOG(WARNING) << StringPrintf(fmt, sum_groups, "HALF OF ", half_space) | 
|  | << " This is allowed for downgrade or secondary OTA on " | 
|  | "retrofit VAB device."; | 
|  | } | 
|  | // still check sum(groups) < super | 
|  | [[fallthrough]]; | 
|  | } | 
|  | case SpaceLimit::ERROR_IF_EXCEEDED_SUPER: { | 
|  | if (sum_groups > full_space) { | 
|  | LOG(ERROR) << base::StringPrintf(fmt, sum_groups, "", full_space); | 
|  | return false; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::PrepareSnapshotPartitionsForUpdate( | 
|  | uint32_t source_slot, | 
|  | uint32_t target_slot, | 
|  | const DeltaArchiveManifest& manifest, | 
|  | uint64_t* required_size) { | 
|  | TEST_AND_RETURN_FALSE(ExpectMetadataMounted()); | 
|  |  | 
|  | std::string device_dir_str; | 
|  | TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
|  | base::FilePath device_dir(device_dir_str); | 
|  | auto super_device = | 
|  | device_dir.Append(GetSuperPartitionName(source_slot)).value(); | 
|  | auto builder = LoadMetadataBuilder(super_device, source_slot); | 
|  | if (builder == nullptr) { | 
|  | LOG(ERROR) << "No metadata at " | 
|  | << BootControlInterface::SlotName(source_slot); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | TEST_AND_RETURN_FALSE( | 
|  | CheckSuperPartitionAllocatableSpace(builder.get(), manifest, true)); | 
|  |  | 
|  | if (!snapshot_->BeginUpdate()) { | 
|  | LOG(ERROR) << "Cannot begin new update."; | 
|  | return false; | 
|  | } | 
|  | auto ret = snapshot_->CreateUpdateSnapshots(manifest); | 
|  | if (!ret) { | 
|  | LOG(ERROR) << "Cannot create update snapshots: " << ret.string(); | 
|  | if (required_size != nullptr && | 
|  | ret.error_code() == Return::ErrorCode::NO_SPACE) { | 
|  | *required_size = ret.required_size(); | 
|  | } | 
|  | return false; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | std::string DynamicPartitionControlAndroid::GetSuperPartitionName( | 
|  | uint32_t slot) { | 
|  | return fs_mgr_get_super_partition_name(slot); | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::UpdatePartitionMetadata( | 
|  | MetadataBuilder* builder, | 
|  | uint32_t target_slot, | 
|  | const DeltaArchiveManifest& manifest) { | 
|  | // Check preconditions. | 
|  | if (GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | CHECK(!target_supports_snapshot_ || IsRecovery()) | 
|  | << "Must use snapshot on VAB device when target build supports VAB and " | 
|  | "not sideloading."; | 
|  | LOG_IF(INFO, !target_supports_snapshot_) | 
|  | << "Not using snapshot on VAB device because target build does not " | 
|  | "support snapshot. Secondary or downgrade OTA?"; | 
|  | LOG_IF(INFO, IsRecovery()) | 
|  | << "Not using snapshot on VAB device because sideloading."; | 
|  | } | 
|  |  | 
|  | // If applying downgrade from Virtual A/B to non-Virtual A/B, the left-over | 
|  | // COW group needs to be deleted to ensure there are enough space to create | 
|  | // target partitions. | 
|  | builder->RemoveGroupAndPartitions(android::snapshot::kCowGroupName); | 
|  |  | 
|  | const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); | 
|  | DeleteGroupsWithSuffix(builder, target_suffix); | 
|  |  | 
|  | TEST_AND_RETURN_FALSE( | 
|  | CheckSuperPartitionAllocatableSpace(builder, manifest, false)); | 
|  |  | 
|  | // name of partition(e.g. "system") -> size in bytes | 
|  | std::map<std::string, uint64_t> partition_sizes; | 
|  | for (const auto& partition : manifest.partitions()) { | 
|  | partition_sizes.emplace(partition.partition_name(), | 
|  | partition.new_partition_info().size()); | 
|  | } | 
|  |  | 
|  | for (const auto& group : manifest.dynamic_partition_metadata().groups()) { | 
|  | auto group_name_suffix = group.name() + target_suffix; | 
|  | if (!builder->AddGroup(group_name_suffix, group.size())) { | 
|  | LOG(ERROR) << "Cannot add group " << group_name_suffix << " with size " | 
|  | << group.size(); | 
|  | return false; | 
|  | } | 
|  | LOG(INFO) << "Added group " << group_name_suffix << " with size " | 
|  | << group.size(); | 
|  |  | 
|  | for (const auto& partition_name : group.partition_names()) { | 
|  | auto partition_sizes_it = partition_sizes.find(partition_name); | 
|  | if (partition_sizes_it == partition_sizes.end()) { | 
|  | // TODO(tbao): Support auto-filling partition info for framework-only | 
|  | // OTA. | 
|  | LOG(ERROR) << "dynamic_partition_metadata contains partition " | 
|  | << partition_name << " but it is not part of the manifest. " | 
|  | << "This is not supported."; | 
|  | return false; | 
|  | } | 
|  | uint64_t partition_size = partition_sizes_it->second; | 
|  |  | 
|  | auto partition_name_suffix = partition_name + target_suffix; | 
|  | Partition* p = builder->AddPartition( | 
|  | partition_name_suffix, group_name_suffix, LP_PARTITION_ATTR_READONLY); | 
|  | if (!p) { | 
|  | LOG(ERROR) << "Cannot add partition " << partition_name_suffix | 
|  | << " to group " << group_name_suffix; | 
|  | return false; | 
|  | } | 
|  | if (!builder->ResizePartition(p, partition_size)) { | 
|  | LOG(ERROR) << "Cannot resize partition " << partition_name_suffix | 
|  | << " to size " << partition_size << ". Not enough space?"; | 
|  | return false; | 
|  | } | 
|  | if (p->size() < partition_size) { | 
|  | LOG(ERROR) << "Partition " << partition_name_suffix | 
|  | << " was expected to have size " << partition_size | 
|  | << ", but instead has size " << p->size(); | 
|  | return false; | 
|  | } | 
|  | LOG(INFO) << "Added partition " << partition_name_suffix << " to group " | 
|  | << group_name_suffix << " with size " << partition_size; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::FinishUpdate(bool powerwash_required) { | 
|  | if (ExpectMetadataMounted()) { | 
|  | if (snapshot_->GetUpdateState() == UpdateState::Initiated) { | 
|  | LOG(INFO) << "Snapshot writes are done."; | 
|  | return snapshot_->FinishedSnapshotWrites(powerwash_required); | 
|  | } | 
|  | } else { | 
|  | LOG(INFO) << "Skip FinishedSnapshotWrites() because /metadata is not " | 
|  | << "mounted"; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::GetPartitionDevice( | 
|  | const std::string& partition_name, | 
|  | uint32_t slot, | 
|  | uint32_t current_slot, | 
|  | bool not_in_payload, | 
|  | std::string* device, | 
|  | bool* is_dynamic) { | 
|  | auto partition_dev = | 
|  | GetPartitionDevice(partition_name, slot, current_slot, not_in_payload); | 
|  | if (!partition_dev.has_value()) { | 
|  | return false; | 
|  | } | 
|  | if (device) { | 
|  | *device = std::move(partition_dev->rw_device_path); | 
|  | } | 
|  | if (is_dynamic) { | 
|  | *is_dynamic = partition_dev->is_dynamic; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::GetPartitionDevice( | 
|  | const std::string& partition_name, | 
|  | uint32_t slot, | 
|  | uint32_t current_slot, | 
|  | std::string* device) { | 
|  | return GetPartitionDevice( | 
|  | partition_name, slot, current_slot, false, device, nullptr); | 
|  | } | 
|  |  | 
|  | static std::string GetStaticDevicePath( | 
|  | const base::FilePath& device_dir, | 
|  | const std::string& partition_name_suffixed) { | 
|  | base::FilePath path = device_dir.Append(partition_name_suffixed); | 
|  | return path.value(); | 
|  | } | 
|  |  | 
|  | std::optional<PartitionDevice> | 
|  | DynamicPartitionControlAndroid::GetPartitionDevice( | 
|  | const std::string& partition_name, | 
|  | uint32_t slot, | 
|  | uint32_t current_slot, | 
|  | bool not_in_payload) { | 
|  | std::string device_dir_str; | 
|  | if (!GetDeviceDir(&device_dir_str)) { | 
|  | LOG(ERROR) << "Failed to GetDeviceDir()"; | 
|  | return {}; | 
|  | } | 
|  | const base::FilePath device_dir(device_dir_str); | 
|  | // When VABC is enabled, we can't get device path for dynamic partitions in | 
|  | // target slot. | 
|  | const auto& partition_name_suffix = | 
|  | partition_name + SlotSuffixForSlotNumber(slot); | 
|  | if (UpdateUsesSnapshotCompression() && slot != current_slot && | 
|  | IsDynamicPartition(partition_name, slot)) { | 
|  | return { | 
|  | {.readonly_device_path = base::FilePath{std::string{VABC_DEVICE_DIR}} | 
|  | .Append(partition_name_suffix) | 
|  | .value(), | 
|  | .is_dynamic = true}}; | 
|  | } | 
|  |  | 
|  | // When looking up target partition devices, treat them as static if the | 
|  | // current payload doesn't encode them as dynamic partitions. This may happen | 
|  | // when applying a retrofit update on top of a dynamic-partitions-enabled | 
|  | // build. | 
|  | std::string device; | 
|  | if (GetDynamicPartitionsFeatureFlag().IsEnabled() && | 
|  | (slot == current_slot || is_target_dynamic_)) { | 
|  | switch (GetDynamicPartitionDevice(device_dir, | 
|  | partition_name_suffix, | 
|  | slot, | 
|  | current_slot, | 
|  | not_in_payload, | 
|  | &device)) { | 
|  | case DynamicPartitionDeviceStatus::SUCCESS: | 
|  | return {{.rw_device_path = device, | 
|  | .readonly_device_path = device, | 
|  | .is_dynamic = true}}; | 
|  |  | 
|  | case DynamicPartitionDeviceStatus::TRY_STATIC: | 
|  | break; | 
|  | case DynamicPartitionDeviceStatus::ERROR:  // fallthrough | 
|  | default: | 
|  | return {}; | 
|  | } | 
|  | } | 
|  | // Try static partitions. | 
|  | auto static_path = GetStaticDevicePath(device_dir, partition_name_suffix); | 
|  | if (!DeviceExists(static_path)) { | 
|  | LOG(ERROR) << "Device file " << static_path << " does not exist."; | 
|  | return {}; | 
|  | } | 
|  |  | 
|  | return {{.rw_device_path = static_path, | 
|  | .readonly_device_path = static_path, | 
|  | .is_dynamic = false}}; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::IsSuperBlockDevice( | 
|  | const base::FilePath& device_dir, | 
|  | uint32_t current_slot, | 
|  | const std::string& partition_name_suffix) { | 
|  | std::string source_device = | 
|  | device_dir.Append(GetSuperPartitionName(current_slot)).value(); | 
|  | auto source_metadata = LoadMetadataBuilder(source_device, current_slot); | 
|  | return source_metadata->HasBlockDevice(partition_name_suffix); | 
|  | } | 
|  |  | 
|  | DynamicPartitionControlAndroid::DynamicPartitionDeviceStatus | 
|  | DynamicPartitionControlAndroid::GetDynamicPartitionDevice( | 
|  | const base::FilePath& device_dir, | 
|  | const std::string& partition_name_suffix, | 
|  | uint32_t slot, | 
|  | uint32_t current_slot, | 
|  | bool not_in_payload, | 
|  | std::string* device) { | 
|  | std::string super_device = | 
|  | device_dir.Append(GetSuperPartitionName(slot)).value(); | 
|  |  | 
|  | auto builder = LoadMetadataBuilder(super_device, slot); | 
|  | if (builder == nullptr) { | 
|  | LOG(ERROR) << "No metadata in slot " | 
|  | << BootControlInterface::SlotName(slot); | 
|  | return DynamicPartitionDeviceStatus::ERROR; | 
|  | } | 
|  | if (builder->FindPartition(partition_name_suffix) == nullptr) { | 
|  | LOG(INFO) << partition_name_suffix | 
|  | << " is not in super partition metadata."; | 
|  |  | 
|  | if (IsSuperBlockDevice(device_dir, current_slot, partition_name_suffix)) { | 
|  | LOG(ERROR) << "The static partition " << partition_name_suffix | 
|  | << " is a block device for current metadata." | 
|  | << "It cannot be used as a logical partition."; | 
|  | return DynamicPartitionDeviceStatus::ERROR; | 
|  | } | 
|  |  | 
|  | return DynamicPartitionDeviceStatus::TRY_STATIC; | 
|  | } | 
|  |  | 
|  | if (slot == current_slot) { | 
|  | if (GetState(partition_name_suffix) != DmDeviceState::ACTIVE) { | 
|  | LOG(WARNING) << partition_name_suffix << " is at current slot but it is " | 
|  | << "not mapped. Now try to map it."; | 
|  | } else { | 
|  | if (GetDmDevicePathByName(partition_name_suffix, device)) { | 
|  | LOG(INFO) << partition_name_suffix | 
|  | << " is mapped on device mapper: " << *device; | 
|  | return DynamicPartitionDeviceStatus::SUCCESS; | 
|  | } | 
|  | LOG(ERROR) << partition_name_suffix << "is mapped but path is unknown."; | 
|  | return DynamicPartitionDeviceStatus::ERROR; | 
|  | } | 
|  | } | 
|  |  | 
|  | bool force_writable = (slot != current_slot) && !not_in_payload; | 
|  | if (MapPartitionOnDeviceMapper( | 
|  | super_device, partition_name_suffix, slot, force_writable, device)) { | 
|  | return DynamicPartitionDeviceStatus::SUCCESS; | 
|  | } | 
|  | return DynamicPartitionDeviceStatus::ERROR; | 
|  | } | 
|  |  | 
|  | void DynamicPartitionControlAndroid::set_fake_mapped_devices( | 
|  | const std::set<std::string>& fake) { | 
|  | mapped_devices_ = fake; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::IsRecovery() { | 
|  | return constants::kIsRecovery; | 
|  | } | 
|  |  | 
|  | static bool IsIncrementalUpdate(const DeltaArchiveManifest& manifest) { | 
|  | const auto& partitions = manifest.partitions(); | 
|  | return std::any_of(partitions.begin(), partitions.end(), [](const auto& p) { | 
|  | return p.has_old_partition_info(); | 
|  | }); | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::DeleteSourcePartitions( | 
|  | MetadataBuilder* builder, | 
|  | uint32_t source_slot, | 
|  | const DeltaArchiveManifest& manifest) { | 
|  | TEST_AND_RETURN_FALSE(IsRecovery()); | 
|  |  | 
|  | if (IsIncrementalUpdate(manifest)) { | 
|  | LOG(ERROR) << "Cannot sideload incremental OTA because snapshots cannot " | 
|  | << "be created."; | 
|  | if (GetVirtualAbFeatureFlag().IsLaunch()) { | 
|  | LOG(ERROR) << "Sideloading incremental updates on devices launches " | 
|  | << " Virtual A/B is not supported."; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | LOG(INFO) << "Will overwrite existing partitions. Slot " | 
|  | << BootControlInterface::SlotName(source_slot) | 
|  | << " may be unbootable until update finishes!"; | 
|  | const std::string source_suffix = SlotSuffixForSlotNumber(source_slot); | 
|  | DeleteGroupsWithSuffix(builder, source_suffix); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | std::unique_ptr<AbstractAction> | 
|  | DynamicPartitionControlAndroid::GetCleanupPreviousUpdateAction( | 
|  | BootControlInterface* boot_control, | 
|  | PrefsInterface* prefs, | 
|  | CleanupPreviousUpdateActionDelegateInterface* delegate) { | 
|  | if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | return std::make_unique<NoOpAction>(); | 
|  | } | 
|  | return std::make_unique<CleanupPreviousUpdateAction>( | 
|  | prefs, boot_control, snapshot_.get(), delegate); | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::ResetUpdate(PrefsInterface* prefs) { | 
|  | if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | return true; | 
|  | } | 
|  | for (auto& list : dynamic_partition_list_) { | 
|  | list.clear(); | 
|  | } | 
|  |  | 
|  | LOG(INFO) << __func__ << " resetting update state and deleting snapshots."; | 
|  | TEST_AND_RETURN_FALSE(prefs != nullptr); | 
|  |  | 
|  | // If the device has already booted into the target slot, | 
|  | // ResetUpdateProgress may pass but CancelUpdate fails. | 
|  | // This is expected. A scheduled CleanupPreviousUpdateAction should free | 
|  | // space when it is done. | 
|  | TEST_AND_RETURN_FALSE(DeltaPerformer::ResetUpdateProgress( | 
|  | prefs, false /* quick */, false /* skip dynamic partitions metadata */)); | 
|  |  | 
|  | if (ExpectMetadataMounted()) { | 
|  | TEST_AND_RETURN_FALSE(snapshot_->CancelUpdate()); | 
|  | } else { | 
|  | LOG(INFO) << "Skip cancelling update in ResetUpdate because /metadata is " | 
|  | << "not mounted"; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::ListDynamicPartitionsForSlot( | 
|  | uint32_t slot, | 
|  | uint32_t current_slot, | 
|  | std::vector<std::string>* partitions) { | 
|  | CHECK(slot == source_slot_ || target_slot_ != UINT32_MAX) | 
|  | << " source slot: " << source_slot_ << " target slot: " << target_slot_ | 
|  | << " slot: " << slot | 
|  | << " attempting to query dynamic partition metadata for target slot " | 
|  | "before PreparePartitionForUpdate() is called. The " | 
|  | "metadata in target slot isn't valid until " | 
|  | "PreparePartitionForUpdate() is called, contining execution would " | 
|  | "likely cause problems."; | 
|  | bool slot_enables_dynamic_partitions = | 
|  | GetDynamicPartitionsFeatureFlag().IsEnabled(); | 
|  | // Check if the target slot has dynamic partitions, this may happen when | 
|  | // applying a retrofit package. | 
|  | if (slot != current_slot) { | 
|  | slot_enables_dynamic_partitions = | 
|  | slot_enables_dynamic_partitions && is_target_dynamic_; | 
|  | } | 
|  |  | 
|  | if (!slot_enables_dynamic_partitions) { | 
|  | LOG(INFO) << "Dynamic partition is not enabled for slot " << slot; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | std::string device_dir_str; | 
|  | TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
|  | base::FilePath device_dir(device_dir_str); | 
|  | auto super_device = device_dir.Append(GetSuperPartitionName(slot)).value(); | 
|  | auto builder = LoadMetadataBuilder(super_device, slot); | 
|  | TEST_AND_RETURN_FALSE(builder != nullptr); | 
|  |  | 
|  | std::vector<std::string> result; | 
|  | auto suffix = SlotSuffixForSlotNumber(slot); | 
|  | for (const auto& group : builder->ListGroups()) { | 
|  | for (const auto& partition : builder->ListPartitionsInGroup(group)) { | 
|  | std::string_view partition_name = partition->name(); | 
|  | if (!android::base::ConsumeSuffix(&partition_name, suffix)) { | 
|  | continue; | 
|  | } | 
|  | result.emplace_back(partition_name); | 
|  | } | 
|  | } | 
|  | *partitions = std::move(result); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::VerifyExtentsForUntouchedPartitions( | 
|  | uint32_t source_slot, | 
|  | uint32_t target_slot, | 
|  | const std::vector<std::string>& partitions) { | 
|  | std::string device_dir_str; | 
|  | TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
|  | base::FilePath device_dir(device_dir_str); | 
|  |  | 
|  | auto source_super_device = | 
|  | device_dir.Append(GetSuperPartitionName(source_slot)).value(); | 
|  | auto source_builder = LoadMetadataBuilder(source_super_device, source_slot); | 
|  | TEST_AND_RETURN_FALSE(source_builder != nullptr); | 
|  |  | 
|  | auto target_super_device = | 
|  | device_dir.Append(GetSuperPartitionName(target_slot)).value(); | 
|  | auto target_builder = LoadMetadataBuilder(target_super_device, target_slot); | 
|  | TEST_AND_RETURN_FALSE(target_builder != nullptr); | 
|  |  | 
|  | return MetadataBuilder::VerifyExtentsAgainstSourceMetadata( | 
|  | *source_builder, source_slot, *target_builder, target_slot, partitions); | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::ExpectMetadataMounted() { | 
|  | // No need to mount metadata for non-Virtual A/B devices. | 
|  | if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | return false; | 
|  | } | 
|  | // Intentionally not checking |metadata_device_| in Android mode. | 
|  | // /metadata should always be mounted in Android mode. If it isn't, let caller | 
|  | // fails when calling into SnapshotManager. | 
|  | if (!IsRecovery()) { | 
|  | return true; | 
|  | } | 
|  | // In recovery mode, explicitly check |metadata_device_|. | 
|  | return metadata_device_ != nullptr; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::EnsureMetadataMounted() { | 
|  | // No need to mount metadata for non-Virtual A/B devices. | 
|  | if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (metadata_device_ == nullptr) { | 
|  | metadata_device_ = snapshot_->EnsureMetadataMounted(); | 
|  | } | 
|  | return metadata_device_ != nullptr; | 
|  | } | 
|  |  | 
|  | std::unique_ptr<android::snapshot::ICowWriter> | 
|  | DynamicPartitionControlAndroid::OpenCowWriter( | 
|  | const std::string& partition_name, | 
|  | const std::optional<std::string>& source_path, | 
|  | std::optional<uint64_t> label) { | 
|  | auto suffix = SlotSuffixForSlotNumber(target_slot_); | 
|  |  | 
|  | auto super_device = GetSuperDevice(); | 
|  | if (!super_device.has_value()) { | 
|  | return nullptr; | 
|  | } | 
|  | CreateLogicalPartitionParams params = { | 
|  | .block_device = super_device->value(), | 
|  | .metadata_slot = target_slot_, | 
|  | .partition_name = partition_name + suffix, | 
|  | .force_writable = true, | 
|  | .timeout_ms = kMapSnapshotTimeout}; | 
|  | // TODO(zhangkelvin) Open an APPEND mode CowWriter once there's an API to do | 
|  | // it. | 
|  | return snapshot_->OpenSnapshotWriter(params, label); | 
|  | }  // namespace chromeos_update_engine | 
|  |  | 
|  | std::unique_ptr<FileDescriptor> DynamicPartitionControlAndroid::OpenCowFd( | 
|  | const std::string& unsuffixed_partition_name, | 
|  | const std::optional<std::string>& source_path, | 
|  | bool is_append) { | 
|  | auto cow_writer = OpenCowWriter( | 
|  | unsuffixed_partition_name, source_path, {kEndOfInstallLabel}); | 
|  | if (cow_writer == nullptr) { | 
|  | LOG(ERROR) << "OpenCowWriter failed"; | 
|  | return nullptr; | 
|  | } | 
|  | auto fd = cow_writer->OpenFileDescriptor(source_path); | 
|  | if (fd == nullptr) { | 
|  | LOG(ERROR) << "ICowReader::OpenFileDescriptor failed"; | 
|  | return nullptr; | 
|  | } | 
|  | return std::make_unique<CowWriterFileDescriptor>( | 
|  | std::move(cow_writer), std::move(fd), source_path); | 
|  | } | 
|  |  | 
|  | std::optional<base::FilePath> DynamicPartitionControlAndroid::GetSuperDevice() { | 
|  | std::string device_dir_str; | 
|  | if (!GetDeviceDir(&device_dir_str)) { | 
|  | LOG(ERROR) << "Failed to get device dir!"; | 
|  | return {}; | 
|  | } | 
|  | base::FilePath device_dir(device_dir_str); | 
|  | auto super_device = device_dir.Append(GetSuperPartitionName(target_slot_)); | 
|  | return super_device; | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::MapAllPartitions() { | 
|  | return snapshot_->MapAllSnapshots(kMapSnapshotTimeout); | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::IsDynamicPartition( | 
|  | const std::string& partition_name, uint32_t slot) { | 
|  | if (slot >= dynamic_partition_list_.size()) { | 
|  | LOG(ERROR) << "Seeing unexpected slot # " << slot << " currently assuming " | 
|  | << dynamic_partition_list_.size() << " slots"; | 
|  | return false; | 
|  | } | 
|  | auto& dynamic_partition_list = dynamic_partition_list_[slot]; | 
|  | if (dynamic_partition_list.empty() && | 
|  | GetDynamicPartitionsFeatureFlag().IsEnabled()) { | 
|  | // Use the DAP config of the target slot. | 
|  | CHECK(ListDynamicPartitionsForSlot( | 
|  | slot, source_slot_, &dynamic_partition_list)); | 
|  | } | 
|  | return std::find(dynamic_partition_list.begin(), | 
|  | dynamic_partition_list.end(), | 
|  | partition_name) != dynamic_partition_list.end(); | 
|  | } | 
|  |  | 
|  | bool DynamicPartitionControlAndroid::UpdateUsesSnapshotCompression() { | 
|  | return GetVirtualAbFeatureFlag().IsEnabled() && | 
|  | snapshot_->UpdateUsesCompression(); | 
|  | } | 
|  |  | 
|  | FeatureFlag | 
|  | DynamicPartitionControlAndroid::GetVirtualAbUserspaceSnapshotsFeatureFlag() { | 
|  | return virtual_ab_userspace_snapshots_; | 
|  | } | 
|  |  | 
|  | }  // namespace chromeos_update_engine |