| // | 
 | // Copyright (C) 2012 The Android Open Source Project | 
 | // | 
 | // Licensed under the Apache License, Version 2.0 (the "License"); | 
 | // you may not use this file except in compliance with the License. | 
 | // You may obtain a copy of the License at | 
 | // | 
 | //      http://www.apache.org/licenses/LICENSE-2.0 | 
 | // | 
 | // Unless required by applicable law or agreed to in writing, software | 
 | // distributed under the License is distributed on an "AS IS" BASIS, | 
 | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 | // See the License for the specific language governing permissions and | 
 | // limitations under the License. | 
 | // | 
 |  | 
 | #ifndef UPDATE_ENGINE_PAYLOAD_CONSUMER_FILE_DESCRIPTOR_H_ | 
 | #define UPDATE_ENGINE_PAYLOAD_CONSUMER_FILE_DESCRIPTOR_H_ | 
 |  | 
 | #include <errno.h> | 
 | #include <memory> | 
 | #include <sys/types.h> | 
 |  | 
 | #include <base/logging.h> | 
 |  | 
 | // Abstraction for managing opening, reading, writing and closing of file | 
 | // descriptors. This includes an abstract class and one standard implementation | 
 | // based on POSIX system calls. | 
 | // | 
 | // TODO(garnold) this class is modeled after (and augments the functionality of) | 
 | // the FileWriter class; ultimately, the latter should be replaced by the former | 
 | // throughout the codebase.  A few deviations from the original FileWriter: | 
 | // | 
 | // * Providing two flavors of Open() | 
 | // | 
 | // * A FileDescriptor is reusable and can be used to read/write multiple files | 
 | //   as long as open/close preconditions are respected. | 
 | // | 
 | // * Write() returns the number of bytes written: this appears to be more useful | 
 | //   for clients, who may wish to retry or otherwise do something useful with | 
 | //   the remaining data that was not written. | 
 |  | 
 | namespace chromeos_update_engine { | 
 |  | 
 | class FileDescriptor; | 
 | using FileDescriptorPtr = std::shared_ptr<FileDescriptor>; | 
 |  | 
 | // An abstract class defining the file descriptor API. | 
 | class FileDescriptor { | 
 |  public: | 
 |   FileDescriptor() {} | 
 |   virtual ~FileDescriptor() {} | 
 |  | 
 |   // Opens a file descriptor. The descriptor must be in the closed state prior | 
 |   // to this call. Returns true on success, false otherwise. Specific | 
 |   // implementations may set errno accordingly. | 
 |   virtual bool Open(const char* path, int flags, mode_t mode) = 0; | 
 |   virtual bool Open(const char* path, int flags) = 0; | 
 |  | 
 |   // Reads from a file descriptor up to a given count. The descriptor must be | 
 |   // open prior to this call. Returns the number of bytes read, or -1 on error. | 
 |   // Specific implementations may set errno accordingly. | 
 |   virtual ssize_t Read(void* buf, size_t count) = 0; | 
 |  | 
 |   // Writes to a file descriptor. The descriptor must be open prior to this | 
 |   // call. Returns the number of bytes written, or -1 if an error occurred and | 
 |   // no bytes were written. Specific implementations may set errno accordingly. | 
 |   virtual ssize_t Write(const void* buf, size_t count) = 0; | 
 |  | 
 |   // Seeks to an offset. Returns the resulting offset location as measured in | 
 |   // bytes from the beginning. On error, return -1. Specific implementations | 
 |   // may set errno accordingly. | 
 |   virtual off64_t Seek(off64_t offset, int whence) = 0; | 
 |  | 
 |   // Return the size of the block device in bytes, or 0 if the device is not a | 
 |   // block device or an error occurred. | 
 |   virtual uint64_t BlockDevSize() = 0; | 
 |  | 
 |   // Runs a ioctl() on the file descriptor if supported. Returns whether | 
 |   // the operation is supported. The |request| can be one of BLKDISCARD, | 
 |   // BLKZEROOUT and BLKSECDISCARD to discard, write zeros or securely discard | 
 |   // the blocks. These ioctls accept a range of bytes (|start| and |length|) | 
 |   // over which they perform the operation. The return value from the ioctl is | 
 |   // stored in |result|. | 
 |   virtual bool BlkIoctl(int request, | 
 |                         uint64_t start, | 
 |                         uint64_t length, | 
 |                         int* result) = 0; | 
 |  | 
 |   // Flushes any cached data. The descriptor must be opened prior to this | 
 |   // call. Returns false if it fails to write data. Implementations may set | 
 |   // errno accrodingly. | 
 |   virtual bool Flush() = 0; | 
 |  | 
 |   // Closes a file descriptor. The descriptor must be open prior to this call. | 
 |   // Returns true on success, false otherwise. Specific implementations may set | 
 |   // errno accordingly. | 
 |   virtual bool Close() = 0; | 
 |  | 
 |   // Indicates whether or not an implementation sets meaningful errno. | 
 |   virtual bool IsSettingErrno() = 0; | 
 |  | 
 |   // Indicates whether the descriptor is currently open. | 
 |   virtual bool IsOpen() = 0; | 
 |  | 
 |  private: | 
 |   DISALLOW_COPY_AND_ASSIGN(FileDescriptor); | 
 | }; | 
 |  | 
 | // A simple EINTR-immune wrapper implementation around standard system calls. | 
 | class EintrSafeFileDescriptor : public FileDescriptor { | 
 |  public: | 
 |   EintrSafeFileDescriptor() : fd_(-1) {} | 
 |  | 
 |   // Interface methods. | 
 |   bool Open(const char* path, int flags, mode_t mode) override; | 
 |   bool Open(const char* path, int flags) override; | 
 |   ssize_t Read(void* buf, size_t count) override; | 
 |   ssize_t Write(const void* buf, size_t count) override; | 
 |   off64_t Seek(off64_t offset, int whence) override; | 
 |   uint64_t BlockDevSize() override; | 
 |   bool BlkIoctl(int request, | 
 |                 uint64_t start, | 
 |                 uint64_t length, | 
 |                 int* result) override; | 
 |   bool Flush() override; | 
 |   bool Close() override; | 
 |   bool IsSettingErrno() override { | 
 |     return true; | 
 |   } | 
 |   bool IsOpen() override { | 
 |     return (fd_ >= 0); | 
 |   } | 
 |  | 
 |  protected: | 
 |   int fd_; | 
 | }; | 
 |  | 
 | }  // namespace chromeos_update_engine | 
 |  | 
 | #endif  // UPDATE_ENGINE_PAYLOAD_CONSUMER_FILE_DESCRIPTOR_H_ |