payload_generator/erofs_filesystem.cc - android_system_update_engine - Gitiles

 //
 // Copyright (C) 2021 The Android Open Source Project
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //      http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.
 //

 #include "update_engine/payload_generator/erofs_filesystem.h"

 #include <time.h>

 #include <string>
 #include <mutex>

 #include <erofs/internal.h>
 #include <erofs/dir.h>
 #include <erofs/io.h>

 #include "erofs_iterate.h"
 #include "lz4diff/lz4diff.pb.h"
 #include "lz4diff/lz4patch.h"
 #include "lz4diff/lz4diff.h"
 #include "update_engine/common/utils.h"
 #include "update_engine/payload_generator/delta_diff_generator.h"
 #include "update_engine/payload_generator/extent_ranges.h"
 #include "update_engine/payload_generator/extent_utils.h"
 #include "update_engine/payload_generator/filesystem_interface.h"

 namespace chromeos_update_engine {

 namespace {

 static constexpr int GetOccupiedSize(const struct erofs_inode* inode,
                                      erofs_off_t* size) {
   *size = 0;
   switch (inode->datalayout) {
     case EROFS_INODE_FLAT_INLINE:
     case EROFS_INODE_FLAT_PLAIN:
     case EROFS_INODE_CHUNK_BASED:
       *size = inode->i_size;
       break;
     case EROFS_INODE_FLAT_COMPRESSION_LEGACY:
     case EROFS_INODE_FLAT_COMPRESSION:
       *size = inode->u.i_blocks * EROFS_BLKSIZ;
       break;
     default:
       LOG(ERROR) << "unknown datalayout " << inode->datalayout;
       return -1;
   }
   return 0;
 }

 static int ErofsMapBlocks(struct erofs_inode* inode,
                           struct erofs_map_blocks* map,
                           int flags) {
   if (erofs_inode_is_data_compressed(inode->datalayout)) {
     return z_erofs_map_blocks_iter(inode, map, flags);
   }
   return erofs_map_blocks(inode, map, flags);
 }

 static constexpr bool IsBlockCompressed(const struct erofs_map_blocks& block) {
   // Z_EROFS_COMPRESSION_SHIFTED means data inside this block are merely
   // memmove()'ed in place, instead of going through some compression function
   // like LZ4 or LZMA
   return block.m_flags & EROFS_MAP_ENCODED &&
          block.m_algorithmformat != Z_EROFS_COMPRESSION_SHIFTED;
 }

 static void FillCompressedBlockInfo(FilesystemInterface::File* p_file,
                                     std::string_view image_filename,
                                     struct erofs_inode* inode) {
   auto& file = *p_file;
   if (!file.is_compressed) {
     return;
   }

   struct erofs_map_blocks block {};
   block.m_la = 0;
   block.index = UINT_MAX;

   const erofs_off_t uncompressed_size = file.file_stat.st_size;
   auto& compressed_blocks = file.compressed_file_info.blocks;
   auto last_pa = block.m_pa;
   auto last_plen = 0;
   while (block.m_la < uncompressed_size) {
     auto error = ErofsMapBlocks(inode, &block, EROFS_GET_BLOCKS_FIEMAP);
     if (error) {
       LOG(FATAL) << "Failed to map blocks for " << file.name << " in "
                  << image_filename;
     }
     // Certain uncompressed blocks have physical size > logical size. Usually
     // the physical block contains bunch of trailing zeros. Include thees
     // bytes in the logical size as well.
     if (!IsBlockCompressed(block)) {
       CHECK_LE(block.m_llen, block.m_plen);
       block.m_llen = block.m_plen;
     }

     if (last_pa + last_plen != block.m_pa) {
       if (last_plen != 0) {
         file.extents.push_back(ExtentForRange(
             last_pa / kBlockSize, utils::DivRoundUp(last_plen, kBlockSize)));
       }
       last_pa = block.m_pa;
       last_plen = block.m_plen;
     } else {
       last_plen += block.m_plen;
     }
     // If logical size and physical size are the same, this block is
     // uncompressed. Join consecutive uncompressed blocks to save a bit memory
     // storing metadata.
     if (block.m_llen == block.m_plen && !compressed_blocks.empty() &&
         !compressed_blocks.back().IsCompressed()) {
       compressed_blocks.back().compressed_length += block.m_llen;
       compressed_blocks.back().uncompressed_length += block.m_llen;
     } else {
       compressed_blocks.push_back(
           CompressedBlock(block.m_la, block.m_plen, block.m_llen));
     }

     block.m_la += block.m_llen;
   }
   file.extents.push_back(ExtentForRange(
       last_pa / kBlockSize, utils::DivRoundUp(last_plen, kBlockSize)));
   return;
 }

 }  // namespace

 static_assert(kBlockSize == EROFS_BLKSIZ);

 std::unique_ptr<ErofsFilesystem> ErofsFilesystem::CreateFromFile(
     const std::string& filename, const CompressionAlgorithm& algo) {
   // erofs-utils makes heavy use of global variables. Hence its functions aren't
   // thread safe. For example, it stores a global int holding file descriptors
   // to the opened EROFS image. It doesn't even support opening more than 1
   // imaeg at a time.
   // TODO(b/202784930) Replace erofs-utils with a cleaner and more C++ friendly
   // library. (Or turn erofs-utils into one)
   static std::mutex m;
   std::lock_guard g{m};

   if (const auto err = dev_open_ro(filename.c_str()); err) {
     PLOG(INFO) << "Failed to open " << filename;
     return nullptr;
   }
   DEFER { dev_close(); };

   if (const auto err = erofs_read_superblock(); err) {
     PLOG(INFO) << "Failed to parse " << filename << " as EROFS image";
     return nullptr;
   }
   struct stat st;
   if (const auto err = fstat(erofs_devfd, &st); err) {
     PLOG(ERROR) << "Failed to stat() " << filename;
     return nullptr;
   }
   const time_t time = sbi.build_time;
   LOG(INFO) << "Parsed EROFS image of size " << st.st_size << " built in "
             << ctime(&time) << " " << filename;
   std::vector<File> files;
   if (!ErofsFilesystem::GetFiles(filename, &files, algo)) {
     return nullptr;
   }
   LOG(INFO) << "Using compression algo " << algo << " for " << filename;
   // private ctor doesn't work with make_unique
   return std::unique_ptr<ErofsFilesystem>(
       new ErofsFilesystem(filename, st.st_size, std::move(files)));
 }

 bool ErofsFilesystem::GetFiles(std::vector<File>* files) const {
   *files = files_;
   return true;
 }

 bool ErofsFilesystem::GetFiles(const std::string& filename,
                                std::vector<File>* files,
                                const CompressionAlgorithm& algo) {
   erofs_iterate_root_dir(&sbi, [&](struct erofs_iterate_dir_context* p_info) {
     const auto& info = *p_info;
     if (info.ctx.de_ftype != EROFS_FT_REG_FILE) {
       return 0;
     }
     struct erofs_inode inode;
     inode.nid = info.ctx.de_nid;
     int err = erofs_read_inode_from_disk(&inode);
     if (err) {
       LOG(ERROR) << "Failed to read inode " << inode.nid;
       return err;
     }
     const auto uncompressed_size = inode.i_size;
     erofs_off_t compressed_size = 0;
     if (uncompressed_size == 0) {
       return 0;
     }
     err = GetOccupiedSize(&inode, &compressed_size);
     if (err) {
       LOG(FATAL) << "Failed to get occupied size for " << filename;
       return err;
     }
     // If data is packed inline, likely this node is stored on block unalighed
     // addresses. OTA doesn't work for non-block aligned files. All blocks not
     // reported by |GetFiles| will be updated in 1 operation. Ignore inline
     // files for now.
     // TODO(b/206729162) Support un-aligned files.
     if (inode.datalayout == EROFS_INODE_FLAT_INLINE) {
       return 0;
     }

     File file;
     file.name = info.path;
     file.compressed_file_info.zero_padding_enabled =
         erofs_sb_has_lz4_0padding();
     file.is_compressed = compressed_size != uncompressed_size;

     file.file_stat.st_size = uncompressed_size;
     file.file_stat.st_ino = inode.nid;
     FillCompressedBlockInfo(&file, filename, &inode);
     file.compressed_file_info.algo = algo;

     files->emplace_back(std::move(file));
     return 0;
   });

   for (auto& file : *files) {
     NormalizeExtents(&file.extents);
   }
   return true;
 }

 }  // namespace chromeos_update_engine
	//
	// Copyright (C) 2021 The Android Open Source Project
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.
	//

	#include "update_engine/payload_generator/erofs_filesystem.h"

	#include <time.h>

	#include <string>
	#include <mutex>

	#include <erofs/internal.h>
	#include <erofs/dir.h>
	#include <erofs/io.h>

	#include "erofs_iterate.h"
	#include "lz4diff/lz4diff.pb.h"
	#include "lz4diff/lz4patch.h"
	#include "lz4diff/lz4diff.h"
	#include "update_engine/common/utils.h"
	#include "update_engine/payload_generator/delta_diff_generator.h"
	#include "update_engine/payload_generator/extent_ranges.h"
	#include "update_engine/payload_generator/extent_utils.h"
	#include "update_engine/payload_generator/filesystem_interface.h"

	namespace chromeos_update_engine {

	namespace {

	static constexpr int GetOccupiedSize(const struct erofs_inode* inode,
	erofs_off_t* size) {
	*size = 0;
	switch (inode->datalayout) {
	case EROFS_INODE_FLAT_INLINE:
	case EROFS_INODE_FLAT_PLAIN:
	case EROFS_INODE_CHUNK_BASED:
	*size = inode->i_size;
	break;
	case EROFS_INODE_FLAT_COMPRESSION_LEGACY:
	case EROFS_INODE_FLAT_COMPRESSION:
	size = inode->u.i_blocks EROFS_BLKSIZ;
	break;
	default:
	LOG(ERROR) << "unknown datalayout " << inode->datalayout;
	return -1;
	}
	return 0;
	}

	static int ErofsMapBlocks(struct erofs_inode* inode,
	struct erofs_map_blocks* map,
	int flags) {
	if (erofs_inode_is_data_compressed(inode->datalayout)) {
	return z_erofs_map_blocks_iter(inode, map, flags);
	}
	return erofs_map_blocks(inode, map, flags);
	}

	static constexpr bool IsBlockCompressed(const struct erofs_map_blocks& block) {
	// Z_EROFS_COMPRESSION_SHIFTED means data inside this block are merely
	// memmove()'ed in place, instead of going through some compression function
	// like LZ4 or LZMA
	return block.m_flags & EROFS_MAP_ENCODED &&
	block.m_algorithmformat != Z_EROFS_COMPRESSION_SHIFTED;
	}

	static void FillCompressedBlockInfo(FilesystemInterface::File* p_file,
	std::string_view image_filename,
	struct erofs_inode* inode) {
	auto& file = *p_file;
	if (!file.is_compressed) {
	return;
	}

	struct erofs_map_blocks block {};
	block.m_la = 0;
	block.index = UINT_MAX;

	const erofs_off_t uncompressed_size = file.file_stat.st_size;
	auto& compressed_blocks = file.compressed_file_info.blocks;
	auto last_pa = block.m_pa;
	auto last_plen = 0;
	while (block.m_la < uncompressed_size) {
	auto error = ErofsMapBlocks(inode, &block, EROFS_GET_BLOCKS_FIEMAP);
	if (error) {
	LOG(FATAL) << "Failed to map blocks for " << file.name << " in "
	<< image_filename;
	}
	// Certain uncompressed blocks have physical size > logical size. Usually
	// the physical block contains bunch of trailing zeros. Include thees
	// bytes in the logical size as well.
	if (!IsBlockCompressed(block)) {
	CHECK_LE(block.m_llen, block.m_plen);
	block.m_llen = block.m_plen;
	}

	if (last_pa + last_plen != block.m_pa) {
	if (last_plen != 0) {
	file.extents.push_back(ExtentForRange(
	last_pa / kBlockSize, utils::DivRoundUp(last_plen, kBlockSize)));
	}
	last_pa = block.m_pa;
	last_plen = block.m_plen;
	} else {
	last_plen += block.m_plen;
	}
	// If logical size and physical size are the same, this block is
	// uncompressed. Join consecutive uncompressed blocks to save a bit memory
	// storing metadata.
	if (block.m_llen == block.m_plen && !compressed_blocks.empty() &&
	!compressed_blocks.back().IsCompressed()) {
	compressed_blocks.back().compressed_length += block.m_llen;
	compressed_blocks.back().uncompressed_length += block.m_llen;
	} else {
	compressed_blocks.push_back(
	CompressedBlock(block.m_la, block.m_plen, block.m_llen));
	}

	block.m_la += block.m_llen;
	}
	file.extents.push_back(ExtentForRange(
	last_pa / kBlockSize, utils::DivRoundUp(last_plen, kBlockSize)));
	return;
	}

	} // namespace

	static_assert(kBlockSize == EROFS_BLKSIZ);

	std::unique_ptr<ErofsFilesystem> ErofsFilesystem::CreateFromFile(
	const std::string& filename, const CompressionAlgorithm& algo) {
	// erofs-utils makes heavy use of global variables. Hence its functions aren't
	// thread safe. For example, it stores a global int holding file descriptors
	// to the opened EROFS image. It doesn't even support opening more than 1
	// imaeg at a time.
	// TODO(b/202784930) Replace erofs-utils with a cleaner and more C++ friendly
	// library. (Or turn erofs-utils into one)
	static std::mutex m;
	std::lock_guard g{m};

	if (const auto err = dev_open_ro(filename.c_str()); err) {
	PLOG(INFO) << "Failed to open " << filename;
	return nullptr;
	}
	DEFER { dev_close(); };

	if (const auto err = erofs_read_superblock(); err) {
	PLOG(INFO) << "Failed to parse " << filename << " as EROFS image";
	return nullptr;
	}
	struct stat st;
	if (const auto err = fstat(erofs_devfd, &st); err) {
	PLOG(ERROR) << "Failed to stat() " << filename;
	return nullptr;
	}
	const time_t time = sbi.build_time;
	LOG(INFO) << "Parsed EROFS image of size " << st.st_size << " built in "
	<< ctime(&time) << " " << filename;
	std::vector<File> files;
	if (!ErofsFilesystem::GetFiles(filename, &files, algo)) {
	return nullptr;
	}
	LOG(INFO) << "Using compression algo " << algo << " for " << filename;
	// private ctor doesn't work with make_unique
	return std::unique_ptr<ErofsFilesystem>(
	new ErofsFilesystem(filename, st.st_size, std::move(files)));
	}

	bool ErofsFilesystem::GetFiles(std::vector<File>* files) const {
	*files = files_;
	return true;
	}

	bool ErofsFilesystem::GetFiles(const std::string& filename,
	std::vector<File>* files,
	const CompressionAlgorithm& algo) {
	erofs_iterate_root_dir(&sbi, [&](struct erofs_iterate_dir_context* p_info) {
	const auto& info = *p_info;
	if (info.ctx.de_ftype != EROFS_FT_REG_FILE) {
	return 0;
	}
	struct erofs_inode inode;
	inode.nid = info.ctx.de_nid;
	int err = erofs_read_inode_from_disk(&inode);
	if (err) {
	LOG(ERROR) << "Failed to read inode " << inode.nid;
	return err;
	}
	const auto uncompressed_size = inode.i_size;
	erofs_off_t compressed_size = 0;
	if (uncompressed_size == 0) {
	return 0;
	}
	err = GetOccupiedSize(&inode, &compressed_size);
	if (err) {
	LOG(FATAL) << "Failed to get occupied size for " << filename;
	return err;
	}
	// If data is packed inline, likely this node is stored on block unalighed
	// addresses. OTA doesn't work for non-block aligned files. All blocks not
	// reported by \|GetFiles\| will be updated in 1 operation. Ignore inline
	// files for now.
	// TODO(b/206729162) Support un-aligned files.
	if (inode.datalayout == EROFS_INODE_FLAT_INLINE) {
	return 0;
	}

	File file;
	file.name = info.path;
	file.compressed_file_info.zero_padding_enabled =
	erofs_sb_has_lz4_0padding();
	file.is_compressed = compressed_size != uncompressed_size;

	file.file_stat.st_size = uncompressed_size;
	file.file_stat.st_ino = inode.nid;
	FillCompressedBlockInfo(&file, filename, &inode);
	file.compressed_file_info.algo = algo;

	files->emplace_back(std::move(file));
	return 0;
	});

	for (auto& file : *files) {
	NormalizeExtents(&file.extents);
	}
	return true;
	}

	} // namespace chromeos_update_engine