| // | 
 | // Copyright (C) 2010 The Android Open Source Project | 
 | // | 
 | // Licensed under the Apache License, Version 2.0 (the "License"); | 
 | // you may not use this file except in compliance with the License. | 
 | // You may obtain a copy of the License at | 
 | // | 
 | //      http://www.apache.org/licenses/LICENSE-2.0 | 
 | // | 
 | // Unless required by applicable law or agreed to in writing, software | 
 | // distributed under the License is distributed on an "AS IS" BASIS, | 
 | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 | // See the License for the specific language governing permissions and | 
 | // limitations under the License. | 
 | // | 
 |  | 
 | #ifndef UPDATE_ENGINE_COMMON_MULTI_RANGE_HTTP_FETCHER_H_ | 
 | #define UPDATE_ENGINE_COMMON_MULTI_RANGE_HTTP_FETCHER_H_ | 
 |  | 
 | #include <deque> | 
 | #include <memory> | 
 | #include <string> | 
 | #include <utility> | 
 | #include <vector> | 
 |  | 
 | #include "update_engine/common/http_fetcher.h" | 
 |  | 
 | // This class is a simple wrapper around an HttpFetcher. The client | 
 | // specifies a vector of byte ranges. MultiRangeHttpFetcher will fetch bytes | 
 | // from those offsets, using the same bash fetcher for all ranges. Thus, the | 
 | // fetcher must support beginning a transfer after one has stopped. Pass -1 | 
 | // as a length to specify unlimited length. It really only would make sense | 
 | // for the last range specified to have unlimited length, tho it is legal for | 
 | // other entries to have unlimited length. | 
 |  | 
 | // There are three states a MultiRangeHttpFetcher object will be in: | 
 | // - Stopped (start state) | 
 | // - Downloading | 
 | // - Pending transfer ended | 
 | // Various functions below that might change state indicate possible | 
 | // state changes. | 
 |  | 
 | namespace chromeos_update_engine { | 
 |  | 
 | class MultiRangeHttpFetcher : public HttpFetcher, public HttpFetcherDelegate { | 
 |  public: | 
 |   // Takes ownership of the passed in fetcher. | 
 |   explicit MultiRangeHttpFetcher(HttpFetcher* base_fetcher) | 
 |       : HttpFetcher(base_fetcher->proxy_resolver()), | 
 |         base_fetcher_(base_fetcher), | 
 |         base_fetcher_active_(false), | 
 |         pending_transfer_ended_(false), | 
 |         terminating_(false), | 
 |         current_index_(0), | 
 |         bytes_received_this_range_(0) {} | 
 |   ~MultiRangeHttpFetcher() override {} | 
 |  | 
 |   void ClearRanges() { ranges_.clear(); } | 
 |  | 
 |   void AddRange(off_t offset, size_t size) { | 
 |     CHECK_GT(size, static_cast<size_t>(0)); | 
 |     ranges_.push_back(Range(offset, size)); | 
 |   } | 
 |  | 
 |   void AddRange(off_t offset) { | 
 |     ranges_.push_back(Range(offset)); | 
 |   } | 
 |  | 
 |   // HttpFetcher overrides. | 
 |   void SetOffset(off_t offset) override {}  // for now, doesn't support this | 
 |  | 
 |   void SetLength(size_t length) override {}  // unsupported | 
 |   void UnsetLength() override {} | 
 |  | 
 |   // Begins the transfer to the specified URL. | 
 |   // State change: Stopped -> Downloading | 
 |   // (corner case: Stopped -> Stopped for an empty request) | 
 |   void BeginTransfer(const std::string& url) override; | 
 |  | 
 |   // State change: Downloading -> Pending transfer ended | 
 |   void TerminateTransfer() override; | 
 |  | 
 |   void SetHeader(const std::string& header_name, | 
 |                  const std::string& header_value) override { | 
 |     base_fetcher_->SetHeader(header_name, header_value); | 
 |   } | 
 |  | 
 |   void Pause() override { base_fetcher_->Pause(); } | 
 |  | 
 |   void Unpause() override { base_fetcher_->Unpause(); } | 
 |  | 
 |   // These functions are overloaded in LibcurlHttp fetcher for testing purposes. | 
 |   void set_idle_seconds(int seconds) override { | 
 |     base_fetcher_->set_idle_seconds(seconds); | 
 |   } | 
 |   void set_retry_seconds(int seconds) override { | 
 |     base_fetcher_->set_retry_seconds(seconds); | 
 |   } | 
 |   // TODO(deymo): Determine if this method should be virtual in HttpFetcher so | 
 |   // this call is sent to the base_fetcher_. | 
 |   virtual void SetProxies(const std::deque<std::string>& proxies) { | 
 |     base_fetcher_->SetProxies(proxies); | 
 |   } | 
 |  | 
 |   inline size_t GetBytesDownloaded() override { | 
 |     return base_fetcher_->GetBytesDownloaded(); | 
 |   } | 
 |  | 
 |   void set_low_speed_limit(int low_speed_bps, int low_speed_sec) override { | 
 |     base_fetcher_->set_low_speed_limit(low_speed_bps, low_speed_sec); | 
 |   } | 
 |  | 
 |   void set_connect_timeout(int connect_timeout_seconds) override { | 
 |     base_fetcher_->set_connect_timeout(connect_timeout_seconds); | 
 |   } | 
 |  | 
 |   void set_max_retry_count(int max_retry_count) override { | 
 |     base_fetcher_->set_max_retry_count(max_retry_count); | 
 |   } | 
 |  | 
 |  private: | 
 |   // A range object defining the offset and length of a download chunk.  Zero | 
 |   // length indicates an unspecified end offset (note that it is impossible to | 
 |   // request a zero-length range in HTTP). | 
 |   class Range { | 
 |    public: | 
 |     Range(off_t offset, size_t length) : offset_(offset), length_(length) {} | 
 |     explicit Range(off_t offset) : offset_(offset), length_(0) {} | 
 |  | 
 |     inline off_t offset() const { return offset_; } | 
 |     inline size_t length() const { return length_; } | 
 |  | 
 |     inline bool HasLength() const { return (length_ > 0); } | 
 |  | 
 |     std::string ToString() const; | 
 |  | 
 |    private: | 
 |     off_t offset_; | 
 |     size_t length_; | 
 |   }; | 
 |  | 
 |   typedef std::vector<Range> RangesVect; | 
 |  | 
 |   // State change: Stopped or Downloading -> Downloading | 
 |   void StartTransfer(); | 
 |  | 
 |   // HttpFetcherDelegate overrides. | 
 |   // State change: Downloading -> Downloading or Pending transfer ended | 
 |   void ReceivedBytes(HttpFetcher* fetcher, | 
 |                      const void* bytes, | 
 |                      size_t length) override; | 
 |  | 
 |   // State change: Pending transfer ended -> Stopped | 
 |   void TransferEnded(HttpFetcher* fetcher, bool successful); | 
 |   // These two call TransferEnded(): | 
 |   void TransferComplete(HttpFetcher* fetcher, bool successful) override; | 
 |   void TransferTerminated(HttpFetcher* fetcher) override; | 
 |  | 
 |   void Reset(); | 
 |  | 
 |   std::unique_ptr<HttpFetcher> base_fetcher_; | 
 |  | 
 |   // If true, do not send any more data or TransferComplete to the delegate. | 
 |   bool base_fetcher_active_; | 
 |  | 
 |   // If true, the next fetcher needs to be started when TransferTerminated is | 
 |   // received from the current fetcher. | 
 |   bool pending_transfer_ended_; | 
 |  | 
 |   // True if we are waiting for base fetcher to terminate b/c we are | 
 |   // ourselves terminating. | 
 |   bool terminating_; | 
 |  | 
 |   RangesVect ranges_; | 
 |  | 
 |   RangesVect::size_type current_index_;  // index into ranges_ | 
 |   size_t bytes_received_this_range_; | 
 |  | 
 |   DISALLOW_COPY_AND_ASSIGN(MultiRangeHttpFetcher); | 
 | }; | 
 |  | 
 | }  // namespace chromeos_update_engine | 
 |  | 
 | #endif  // UPDATE_ENGINE_COMMON_MULTI_RANGE_HTTP_FETCHER_H_ |