|  | // | 
|  | // Copyright (C) 2009 The Android Open Source Project | 
|  | // | 
|  | // Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | // you may not use this file except in compliance with the License. | 
|  | // You may obtain a copy of the License at | 
|  | // | 
|  | //      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | // | 
|  | // Unless required by applicable law or agreed to in writing, software | 
|  | // distributed under the License is distributed on an "AS IS" BASIS, | 
|  | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | // See the License for the specific language governing permissions and | 
|  | // limitations under the License. | 
|  | // | 
|  |  | 
|  | #include "update_engine/payload_consumer/extent_writer.h" | 
|  |  | 
|  | #include <fcntl.h> | 
|  | #include <sys/stat.h> | 
|  | #include <sys/types.h> | 
|  | #include <unistd.h> | 
|  |  | 
|  | #include <algorithm> | 
|  | #include <string> | 
|  | #include <vector> | 
|  |  | 
|  | #include <brillo/make_unique_ptr.h> | 
|  | #include <brillo/secure_blob.h> | 
|  | #include <gtest/gtest.h> | 
|  |  | 
|  | #include "update_engine/common/test_utils.h" | 
|  | #include "update_engine/common/utils.h" | 
|  | #include "update_engine/payload_consumer/payload_constants.h" | 
|  |  | 
|  | using chromeos_update_engine::test_utils::ExpectVectorsEq; | 
|  | using std::min; | 
|  | using std::string; | 
|  | using std::vector; | 
|  |  | 
|  | namespace chromeos_update_engine { | 
|  |  | 
|  | static_assert(sizeof(off_t) == 8, "off_t not 64 bit"); | 
|  |  | 
|  | namespace { | 
|  | const char kPathTemplate[] = "./ExtentWriterTest-file.XXXXXX"; | 
|  | const size_t kBlockSize = 4096; | 
|  | } | 
|  |  | 
|  | class ExtentWriterTest : public ::testing::Test { | 
|  | protected: | 
|  | void SetUp() override { | 
|  | memcpy(path_, kPathTemplate, sizeof(kPathTemplate)); | 
|  | fd_.reset(new EintrSafeFileDescriptor); | 
|  | int fd = mkstemp(path_); | 
|  | ASSERT_TRUE(fd_->Open(path_, O_RDWR, 0600)); | 
|  | close(fd); | 
|  | } | 
|  | void TearDown() override { | 
|  | fd_->Close(); | 
|  | unlink(path_); | 
|  | } | 
|  |  | 
|  | // Writes data to an extent writer in 'chunk_size' chunks with | 
|  | // the first chunk of size first_chunk_size. It calculates what the | 
|  | // resultant file should look like and ensure that the extent writer | 
|  | // wrote the file correctly. | 
|  | void WriteAlignedExtents(size_t chunk_size, size_t first_chunk_size); | 
|  | void TestZeroPad(bool aligned_size); | 
|  |  | 
|  | FileDescriptorPtr fd_; | 
|  | char path_[sizeof(kPathTemplate)]; | 
|  | }; | 
|  |  | 
|  | TEST_F(ExtentWriterTest, SimpleTest) { | 
|  | vector<Extent> extents; | 
|  | Extent extent; | 
|  | extent.set_start_block(1); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  |  | 
|  | const string bytes = "1234"; | 
|  |  | 
|  | DirectExtentWriter direct_writer; | 
|  | EXPECT_TRUE(direct_writer.Init(fd_, extents, kBlockSize)); | 
|  | EXPECT_TRUE(direct_writer.Write(bytes.data(), bytes.size())); | 
|  | EXPECT_TRUE(direct_writer.End()); | 
|  |  | 
|  | EXPECT_EQ(kBlockSize + bytes.size(), utils::FileSize(path_)); | 
|  |  | 
|  | brillo::Blob result_file; | 
|  | EXPECT_TRUE(utils::ReadFile(path_, &result_file)); | 
|  |  | 
|  | brillo::Blob expected_file(kBlockSize); | 
|  | expected_file.insert(expected_file.end(), | 
|  | bytes.data(), bytes.data() + bytes.size()); | 
|  | ExpectVectorsEq(expected_file, result_file); | 
|  | } | 
|  |  | 
|  | TEST_F(ExtentWriterTest, ZeroLengthTest) { | 
|  | vector<Extent> extents; | 
|  | Extent extent; | 
|  | extent.set_start_block(1); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  |  | 
|  | DirectExtentWriter direct_writer; | 
|  | EXPECT_TRUE(direct_writer.Init(fd_, extents, kBlockSize)); | 
|  | EXPECT_TRUE(direct_writer.Write(nullptr, 0)); | 
|  | EXPECT_TRUE(direct_writer.End()); | 
|  | } | 
|  |  | 
|  | TEST_F(ExtentWriterTest, OverflowExtentTest) { | 
|  | WriteAlignedExtents(kBlockSize * 3, kBlockSize * 3); | 
|  | } | 
|  |  | 
|  | TEST_F(ExtentWriterTest, UnalignedWriteTest) { | 
|  | WriteAlignedExtents(7, 7); | 
|  | } | 
|  |  | 
|  | TEST_F(ExtentWriterTest, LargeUnalignedWriteTest) { | 
|  | WriteAlignedExtents(kBlockSize * 2, kBlockSize / 2); | 
|  | } | 
|  |  | 
|  | void ExtentWriterTest::WriteAlignedExtents(size_t chunk_size, | 
|  | size_t first_chunk_size) { | 
|  | vector<Extent> extents; | 
|  | Extent extent; | 
|  | extent.set_start_block(1); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  | extent.set_start_block(0); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  | extent.set_start_block(2); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  |  | 
|  | brillo::Blob data(kBlockSize * 3); | 
|  | test_utils::FillWithData(&data); | 
|  |  | 
|  | DirectExtentWriter direct_writer; | 
|  | EXPECT_TRUE(direct_writer.Init(fd_, extents, kBlockSize)); | 
|  |  | 
|  | size_t bytes_written = 0; | 
|  | while (bytes_written < data.size()) { | 
|  | size_t bytes_to_write = min(data.size() - bytes_written, chunk_size); | 
|  | if (bytes_written == 0) { | 
|  | bytes_to_write = min(data.size() - bytes_written, first_chunk_size); | 
|  | } | 
|  | EXPECT_TRUE(direct_writer.Write(&data[bytes_written], bytes_to_write)); | 
|  | bytes_written += bytes_to_write; | 
|  | } | 
|  | EXPECT_TRUE(direct_writer.End()); | 
|  |  | 
|  | EXPECT_EQ(data.size(), utils::FileSize(path_)); | 
|  |  | 
|  | brillo::Blob result_file; | 
|  | EXPECT_TRUE(utils::ReadFile(path_, &result_file)); | 
|  |  | 
|  | brillo::Blob expected_file; | 
|  | expected_file.insert(expected_file.end(), | 
|  | data.begin() + kBlockSize, | 
|  | data.begin() + kBlockSize * 2); | 
|  | expected_file.insert(expected_file.end(), | 
|  | data.begin(), data.begin() + kBlockSize); | 
|  | expected_file.insert(expected_file.end(), | 
|  | data.begin() + kBlockSize * 2, data.end()); | 
|  | ExpectVectorsEq(expected_file, result_file); | 
|  | } | 
|  |  | 
|  | TEST_F(ExtentWriterTest, ZeroPadNullTest) { | 
|  | TestZeroPad(true); | 
|  | } | 
|  |  | 
|  | TEST_F(ExtentWriterTest, ZeroPadFillTest) { | 
|  | TestZeroPad(false); | 
|  | } | 
|  |  | 
|  | void ExtentWriterTest::TestZeroPad(bool aligned_size) { | 
|  | vector<Extent> extents; | 
|  | Extent extent; | 
|  | extent.set_start_block(1); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  | extent.set_start_block(0); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  |  | 
|  | brillo::Blob data(kBlockSize * 2); | 
|  | test_utils::FillWithData(&data); | 
|  |  | 
|  | ZeroPadExtentWriter zero_pad_writer( | 
|  | brillo::make_unique_ptr(new DirectExtentWriter())); | 
|  |  | 
|  | EXPECT_TRUE(zero_pad_writer.Init(fd_, extents, kBlockSize)); | 
|  | size_t bytes_to_write = data.size(); | 
|  | const size_t missing_bytes = (aligned_size ? 0 : 9); | 
|  | bytes_to_write -= missing_bytes; | 
|  | fd_->Seek(kBlockSize - missing_bytes, SEEK_SET); | 
|  | EXPECT_EQ(3, fd_->Write("xxx", 3)); | 
|  | ASSERT_TRUE(zero_pad_writer.Write(data.data(), bytes_to_write)); | 
|  | EXPECT_TRUE(zero_pad_writer.End()); | 
|  |  | 
|  | EXPECT_EQ(data.size(), utils::FileSize(path_)); | 
|  |  | 
|  | brillo::Blob result_file; | 
|  | EXPECT_TRUE(utils::ReadFile(path_, &result_file)); | 
|  |  | 
|  | brillo::Blob expected_file; | 
|  | expected_file.insert(expected_file.end(), | 
|  | data.begin() + kBlockSize, | 
|  | data.begin() + kBlockSize * 2); | 
|  | expected_file.insert(expected_file.end(), | 
|  | data.begin(), data.begin() + kBlockSize); | 
|  | if (missing_bytes) { | 
|  | memset(&expected_file[kBlockSize - missing_bytes], 0, missing_bytes); | 
|  | } | 
|  |  | 
|  | ExpectVectorsEq(expected_file, result_file); | 
|  | } | 
|  |  | 
|  | TEST_F(ExtentWriterTest, SparseFileTest) { | 
|  | vector<Extent> extents; | 
|  | Extent extent; | 
|  | extent.set_start_block(1); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  | extent.set_start_block(kSparseHole); | 
|  | extent.set_num_blocks(2); | 
|  | extents.push_back(extent); | 
|  | extent.set_start_block(0); | 
|  | extent.set_num_blocks(1); | 
|  | extents.push_back(extent); | 
|  | const int block_count = 4; | 
|  | const int on_disk_count = 2; | 
|  |  | 
|  | brillo::Blob data(17); | 
|  | test_utils::FillWithData(&data); | 
|  |  | 
|  | DirectExtentWriter direct_writer; | 
|  | EXPECT_TRUE(direct_writer.Init(fd_, extents, kBlockSize)); | 
|  |  | 
|  | size_t bytes_written = 0; | 
|  | while (bytes_written < (block_count * kBlockSize)) { | 
|  | size_t bytes_to_write = min(block_count * kBlockSize - bytes_written, | 
|  | data.size()); | 
|  | EXPECT_TRUE(direct_writer.Write(data.data(), bytes_to_write)); | 
|  | bytes_written += bytes_to_write; | 
|  | } | 
|  | EXPECT_TRUE(direct_writer.End()); | 
|  |  | 
|  | // check file size, then data inside | 
|  | ASSERT_EQ(2 * kBlockSize, utils::FileSize(path_)); | 
|  |  | 
|  | brillo::Blob resultant_data; | 
|  | EXPECT_TRUE(utils::ReadFile(path_, &resultant_data)); | 
|  |  | 
|  | // Create expected data | 
|  | brillo::Blob expected_data(on_disk_count * kBlockSize); | 
|  | brillo::Blob big(block_count * kBlockSize); | 
|  | for (brillo::Blob::size_type i = 0; i < big.size(); i++) { | 
|  | big[i] = data[i % data.size()]; | 
|  | } | 
|  | memcpy(&expected_data[kBlockSize], &big[0], kBlockSize); | 
|  | memcpy(&expected_data[0], &big[3 * kBlockSize], kBlockSize); | 
|  | ExpectVectorsEq(expected_data, resultant_data); | 
|  | } | 
|  |  | 
|  | }  // namespace chromeos_update_engine |