| // | 
 | // Copyright (C) 2018 The Android Open Source Project | 
 | // | 
 | // Licensed under the Apache License, Version 2.0 (the "License"); | 
 | // you may not use this file except in compliance with the License. | 
 | // You may obtain a copy of the License at | 
 | // | 
 | //      http://www.apache.org/licenses/LICENSE-2.0 | 
 | // | 
 | // Unless required by applicable law or agreed to in writing, software | 
 | // distributed under the License is distributed on an "AS IS" BASIS, | 
 | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 | // See the License for the specific language governing permissions and | 
 | // limitations under the License. | 
 | // | 
 |  | 
 | #include "update_engine/aosp/dynamic_partition_control_android.h" | 
 |  | 
 | #include <algorithm> | 
 | #include <chrono>  // NOLINT(build/c++11) - using libsnapshot / liblp API | 
 | #include <cstdint> | 
 | #include <map> | 
 | #include <memory> | 
 | #include <set> | 
 | #include <string> | 
 | #include <string_view> | 
 | #include <utility> | 
 | #include <vector> | 
 |  | 
 | #include <android-base/properties.h> | 
 | #include <android-base/strings.h> | 
 | #include <base/files/file_util.h> | 
 | #include <base/logging.h> | 
 | #include <base/strings/string_util.h> | 
 | #include <base/strings/stringprintf.h> | 
 | #include <bootloader_message/bootloader_message.h> | 
 | #include <fs_mgr.h> | 
 | #include <fs_mgr_dm_linear.h> | 
 | #include <fs_mgr_overlayfs.h> | 
 | #include <libavb/libavb.h> | 
 | #include <libdm/dm.h> | 
 | #include <liblp/liblp.h> | 
 | #include <libsnapshot/cow_writer.h> | 
 | #include <libsnapshot/snapshot.h> | 
 | #include <libsnapshot/snapshot_stub.h> | 
 |  | 
 | #include "update_engine/aosp/cleanup_previous_update_action.h" | 
 | #include "update_engine/aosp/dynamic_partition_utils.h" | 
 | #include "update_engine/common/boot_control_interface.h" | 
 | #include "update_engine/common/dynamic_partition_control_interface.h" | 
 | #include "update_engine/common/platform_constants.h" | 
 | #include "update_engine/common/utils.h" | 
 | #include "update_engine/payload_consumer/cow_writer_file_descriptor.h" | 
 | #include "update_engine/payload_consumer/delta_performer.h" | 
 |  | 
 | using android::base::GetBoolProperty; | 
 | using android::base::GetProperty; | 
 | using android::base::Join; | 
 | using android::dm::DeviceMapper; | 
 | using android::dm::DmDeviceState; | 
 | using android::fs_mgr::CreateLogicalPartition; | 
 | using android::fs_mgr::CreateLogicalPartitionParams; | 
 | using android::fs_mgr::DestroyLogicalPartition; | 
 | using android::fs_mgr::Fstab; | 
 | using android::fs_mgr::MetadataBuilder; | 
 | using android::fs_mgr::Partition; | 
 | using android::fs_mgr::PartitionOpener; | 
 | using android::fs_mgr::SlotSuffixForSlotNumber; | 
 | using android::snapshot::OptimizeSourceCopyOperation; | 
 | using android::snapshot::Return; | 
 | using android::snapshot::SnapshotManager; | 
 | using android::snapshot::SnapshotManagerStub; | 
 | using android::snapshot::UpdateState; | 
 | using base::StringPrintf; | 
 |  | 
 | namespace chromeos_update_engine { | 
 |  | 
 | constexpr char kUseDynamicPartitions[] = "ro.boot.dynamic_partitions"; | 
 | constexpr char kRetrfoitDynamicPartitions[] = | 
 |     "ro.boot.dynamic_partitions_retrofit"; | 
 | constexpr char kVirtualAbEnabled[] = "ro.virtual_ab.enabled"; | 
 | constexpr char kVirtualAbRetrofit[] = "ro.virtual_ab.retrofit"; | 
 | constexpr char kVirtualAbCompressionEnabled[] = | 
 |     "ro.virtual_ab.compression.enabled"; | 
 |  | 
 | // Currently, android doesn't have a retrofit prop for VAB Compression. However, | 
 | // struct FeatureFlag forces us to determine if a feature is 'retrofit'. So this | 
 | // is here just to simplify code. Replace it with real retrofit prop name once | 
 | // there is one. | 
 | constexpr char kVirtualAbCompressionRetrofit[] = ""; | 
 | constexpr char kPostinstallFstabPrefix[] = "ro.postinstall.fstab.prefix"; | 
 | // Map timeout for dynamic partitions. | 
 | constexpr std::chrono::milliseconds kMapTimeout{1000}; | 
 | // Map timeout for dynamic partitions with snapshots. Since several devices | 
 | // needs to be mapped, this timeout is longer than |kMapTimeout|. | 
 | constexpr std::chrono::milliseconds kMapSnapshotTimeout{5000}; | 
 |  | 
 | DynamicPartitionControlAndroid::~DynamicPartitionControlAndroid() { | 
 |   Cleanup(); | 
 | } | 
 |  | 
 | static FeatureFlag GetFeatureFlag(const char* enable_prop, | 
 |                                   const char* retrofit_prop) { | 
 |   // Default retrofit to false if retrofit_prop is empty. | 
 |   bool retrofit = retrofit_prop && retrofit_prop[0] != '\0' && | 
 |                   GetBoolProperty(retrofit_prop, false); | 
 |   bool enabled = GetBoolProperty(enable_prop, false); | 
 |   if (retrofit && !enabled) { | 
 |     LOG(ERROR) << retrofit_prop << " is true but " << enable_prop | 
 |                << " is not. These sysprops are inconsistent. Assume that " | 
 |                << enable_prop << " is true from now on."; | 
 |   } | 
 |   if (retrofit) { | 
 |     return FeatureFlag(FeatureFlag::Value::RETROFIT); | 
 |   } | 
 |   if (enabled) { | 
 |     return FeatureFlag(FeatureFlag::Value::LAUNCH); | 
 |   } | 
 |   return FeatureFlag(FeatureFlag::Value::NONE); | 
 | } | 
 |  | 
 | DynamicPartitionControlAndroid::DynamicPartitionControlAndroid( | 
 |     uint32_t source_slot) | 
 |     : dynamic_partitions_( | 
 |           GetFeatureFlag(kUseDynamicPartitions, kRetrfoitDynamicPartitions)), | 
 |       virtual_ab_(GetFeatureFlag(kVirtualAbEnabled, kVirtualAbRetrofit)), | 
 |       virtual_ab_compression_(GetFeatureFlag(kVirtualAbCompressionEnabled, | 
 |                                              kVirtualAbCompressionRetrofit)), | 
 |       source_slot_(source_slot) { | 
 |   if (GetVirtualAbFeatureFlag().IsEnabled()) { | 
 |     snapshot_ = SnapshotManager::New(); | 
 |   } else { | 
 |     snapshot_ = SnapshotManagerStub::New(); | 
 |   } | 
 |   CHECK(snapshot_ != nullptr) << "Cannot initialize SnapshotManager."; | 
 | } | 
 |  | 
 | FeatureFlag DynamicPartitionControlAndroid::GetDynamicPartitionsFeatureFlag() { | 
 |   return dynamic_partitions_; | 
 | } | 
 |  | 
 | FeatureFlag DynamicPartitionControlAndroid::GetVirtualAbFeatureFlag() { | 
 |   return virtual_ab_; | 
 | } | 
 |  | 
 | FeatureFlag | 
 | DynamicPartitionControlAndroid::GetVirtualAbCompressionFeatureFlag() { | 
 |   if constexpr (constants::kIsRecovery) { | 
 |     // Don't attempt VABC in recovery | 
 |     return FeatureFlag(FeatureFlag::Value::NONE); | 
 |   } | 
 |   return virtual_ab_compression_; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::OptimizeOperation( | 
 |     const std::string& partition_name, | 
 |     const InstallOperation& operation, | 
 |     InstallOperation* optimized) { | 
 |   switch (operation.type()) { | 
 |     case InstallOperation::SOURCE_COPY: | 
 |       return target_supports_snapshot_ && | 
 |              GetVirtualAbFeatureFlag().IsEnabled() && | 
 |              mapped_devices_.count(partition_name + | 
 |                                    SlotSuffixForSlotNumber(target_slot_)) > 0 && | 
 |              OptimizeSourceCopyOperation(operation, optimized); | 
 |       break; | 
 |     default: | 
 |       break; | 
 |   } | 
 |   return false; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::MapPartitionInternal( | 
 |     const std::string& super_device, | 
 |     const std::string& target_partition_name, | 
 |     uint32_t slot, | 
 |     bool force_writable, | 
 |     std::string* path) { | 
 |   CreateLogicalPartitionParams params = { | 
 |       .block_device = super_device, | 
 |       .metadata_slot = slot, | 
 |       .partition_name = target_partition_name, | 
 |       .force_writable = force_writable, | 
 |   }; | 
 |   bool success = false; | 
 |   if (GetVirtualAbFeatureFlag().IsEnabled() && target_supports_snapshot_ && | 
 |       force_writable && ExpectMetadataMounted()) { | 
 |     // Only target partitions are mapped with force_writable. On Virtual | 
 |     // A/B devices, target partitions may overlap with source partitions, so | 
 |     // they must be mapped with snapshot. | 
 |     // One exception is when /metadata is not mounted. Fallback to | 
 |     // CreateLogicalPartition as snapshots are not created in the first place. | 
 |     params.timeout_ms = kMapSnapshotTimeout; | 
 |     success = snapshot_->MapUpdateSnapshot(params, path); | 
 |   } else { | 
 |     params.timeout_ms = kMapTimeout; | 
 |     success = CreateLogicalPartition(params, path); | 
 |   } | 
 |  | 
 |   if (!success) { | 
 |     LOG(ERROR) << "Cannot map " << target_partition_name << " in " | 
 |                << super_device << " on device mapper."; | 
 |     return false; | 
 |   } | 
 |   LOG(INFO) << "Succesfully mapped " << target_partition_name | 
 |             << " to device mapper (force_writable = " << force_writable | 
 |             << "); device path at " << *path; | 
 |   mapped_devices_.insert(target_partition_name); | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::MapPartitionOnDeviceMapper( | 
 |     const std::string& super_device, | 
 |     const std::string& target_partition_name, | 
 |     uint32_t slot, | 
 |     bool force_writable, | 
 |     std::string* path) { | 
 |   DmDeviceState state = GetState(target_partition_name); | 
 |   if (state == DmDeviceState::ACTIVE) { | 
 |     if (mapped_devices_.find(target_partition_name) != mapped_devices_.end()) { | 
 |       if (GetDmDevicePathByName(target_partition_name, path)) { | 
 |         LOG(INFO) << target_partition_name | 
 |                   << " is mapped on device mapper: " << *path; | 
 |         return true; | 
 |       } | 
 |       LOG(ERROR) << target_partition_name << " is mapped but path is unknown."; | 
 |       return false; | 
 |     } | 
 |     // If target_partition_name is not in mapped_devices_ but state is ACTIVE, | 
 |     // the device might be mapped incorrectly before. Attempt to unmap it. | 
 |     // Note that for source partitions, if GetState() == ACTIVE, callers (e.g. | 
 |     // BootControlAndroid) should not call MapPartitionOnDeviceMapper, but | 
 |     // should directly call GetDmDevicePathByName. | 
 |     if (!UnmapPartitionOnDeviceMapper(target_partition_name)) { | 
 |       LOG(ERROR) << target_partition_name | 
 |                  << " is mapped before the update, and it cannot be unmapped."; | 
 |       return false; | 
 |     } | 
 |     state = GetState(target_partition_name); | 
 |     if (state != DmDeviceState::INVALID) { | 
 |       LOG(ERROR) << target_partition_name << " is unmapped but state is " | 
 |                  << static_cast<std::underlying_type_t<DmDeviceState>>(state); | 
 |       return false; | 
 |     } | 
 |   } | 
 |   if (state == DmDeviceState::INVALID) { | 
 |     return MapPartitionInternal( | 
 |         super_device, target_partition_name, slot, force_writable, path); | 
 |   } | 
 |  | 
 |   LOG(ERROR) << target_partition_name | 
 |              << " is mapped on device mapper but state is unknown: " | 
 |              << static_cast<std::underlying_type_t<DmDeviceState>>(state); | 
 |   return false; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::UnmapPartitionOnDeviceMapper( | 
 |     const std::string& target_partition_name) { | 
 |   if (DeviceMapper::Instance().GetState(target_partition_name) != | 
 |       DmDeviceState::INVALID) { | 
 |     // Partitions at target slot on non-Virtual A/B devices are mapped as | 
 |     // dm-linear. Also, on Virtual A/B devices, system_other may be mapped for | 
 |     // preopt apps as dm-linear. | 
 |     // Call DestroyLogicalPartition to handle these cases. | 
 |     bool success = DestroyLogicalPartition(target_partition_name); | 
 |  | 
 |     // On a Virtual A/B device, |target_partition_name| may be a leftover from | 
 |     // a paused update. Clean up any underlying devices. | 
 |     if (ExpectMetadataMounted()) { | 
 |       success &= snapshot_->UnmapUpdateSnapshot(target_partition_name); | 
 |     } else { | 
 |       LOG(INFO) << "Skip UnmapUpdateSnapshot(" << target_partition_name | 
 |                 << ") because metadata is not mounted"; | 
 |     } | 
 |  | 
 |     if (!success) { | 
 |       LOG(ERROR) << "Cannot unmap " << target_partition_name | 
 |                  << " from device mapper."; | 
 |       return false; | 
 |     } | 
 |     LOG(INFO) << "Successfully unmapped " << target_partition_name | 
 |               << " from device mapper."; | 
 |   } | 
 |   mapped_devices_.erase(target_partition_name); | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::UnmapAllPartitions() { | 
 |   snapshot_->UnmapAllSnapshots(); | 
 |   if (mapped_devices_.empty()) { | 
 |     return false; | 
 |   } | 
 |   // UnmapPartitionOnDeviceMapper removes objects from mapped_devices_, hence | 
 |   // a copy is needed for the loop. | 
 |   std::set<std::string> mapped = mapped_devices_; | 
 |   LOG(INFO) << "Destroying [" << Join(mapped, ", ") << "] from device mapper"; | 
 |   for (const auto& partition_name : mapped) { | 
 |     ignore_result(UnmapPartitionOnDeviceMapper(partition_name)); | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | void DynamicPartitionControlAndroid::Cleanup() { | 
 |   UnmapAllPartitions(); | 
 |   metadata_device_.reset(); | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::DeviceExists(const std::string& path) { | 
 |   return base::PathExists(base::FilePath(path)); | 
 | } | 
 |  | 
 | android::dm::DmDeviceState DynamicPartitionControlAndroid::GetState( | 
 |     const std::string& name) { | 
 |   return DeviceMapper::Instance().GetState(name); | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::GetDmDevicePathByName( | 
 |     const std::string& name, std::string* path) { | 
 |   return DeviceMapper::Instance().GetDmDevicePathByName(name, path); | 
 | } | 
 |  | 
 | std::unique_ptr<MetadataBuilder> | 
 | DynamicPartitionControlAndroid::LoadMetadataBuilder( | 
 |     const std::string& super_device, uint32_t slot) { | 
 |   auto builder = MetadataBuilder::New(PartitionOpener(), super_device, slot); | 
 |   if (builder == nullptr) { | 
 |     LOG(WARNING) << "No metadata slot " << BootControlInterface::SlotName(slot) | 
 |                  << " in " << super_device; | 
 |     return nullptr; | 
 |   } | 
 |   LOG(INFO) << "Loaded metadata from slot " | 
 |             << BootControlInterface::SlotName(slot) << " in " << super_device; | 
 |   return builder; | 
 | } | 
 |  | 
 | std::unique_ptr<MetadataBuilder> | 
 | DynamicPartitionControlAndroid::LoadMetadataBuilder( | 
 |     const std::string& super_device, | 
 |     uint32_t source_slot, | 
 |     uint32_t target_slot) { | 
 |   bool always_keep_source_slot = !target_supports_snapshot_; | 
 |   auto builder = MetadataBuilder::NewForUpdate(PartitionOpener(), | 
 |                                                super_device, | 
 |                                                source_slot, | 
 |                                                target_slot, | 
 |                                                always_keep_source_slot); | 
 |   if (builder == nullptr) { | 
 |     LOG(WARNING) << "No metadata slot " | 
 |                  << BootControlInterface::SlotName(source_slot) << " in " | 
 |                  << super_device; | 
 |     return nullptr; | 
 |   } | 
 |   LOG(INFO) << "Created metadata for new update from slot " | 
 |             << BootControlInterface::SlotName(source_slot) << " in " | 
 |             << super_device; | 
 |   return builder; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::StoreMetadata( | 
 |     const std::string& super_device, | 
 |     MetadataBuilder* builder, | 
 |     uint32_t target_slot) { | 
 |   auto metadata = builder->Export(); | 
 |   if (metadata == nullptr) { | 
 |     LOG(ERROR) << "Cannot export metadata to slot " | 
 |                << BootControlInterface::SlotName(target_slot) << " in " | 
 |                << super_device; | 
 |     return false; | 
 |   } | 
 |  | 
 |   if (GetDynamicPartitionsFeatureFlag().IsRetrofit()) { | 
 |     if (!FlashPartitionTable(super_device, *metadata)) { | 
 |       LOG(ERROR) << "Cannot write metadata to " << super_device; | 
 |       return false; | 
 |     } | 
 |     LOG(INFO) << "Written metadata to " << super_device; | 
 |   } else { | 
 |     if (!UpdatePartitionTable(super_device, *metadata, target_slot)) { | 
 |       LOG(ERROR) << "Cannot write metadata to slot " | 
 |                  << BootControlInterface::SlotName(target_slot) << " in " | 
 |                  << super_device; | 
 |       return false; | 
 |     } | 
 |     LOG(INFO) << "Copied metadata to slot " | 
 |               << BootControlInterface::SlotName(target_slot) << " in " | 
 |               << super_device; | 
 |   } | 
 |  | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::GetDeviceDir(std::string* out) { | 
 |   // We can't use fs_mgr to look up |partition_name| because fstab | 
 |   // doesn't list every slot partition (it uses the slotselect option | 
 |   // to mask the suffix). | 
 |   // | 
 |   // We can however assume that there's an entry for the /misc mount | 
 |   // point and use that to get the device file for the misc | 
 |   // partition. This helps us locate the disk that |partition_name| | 
 |   // resides on. From there we'll assume that a by-name scheme is used | 
 |   // so we can just replace the trailing "misc" by the given | 
 |   // |partition_name| and suffix corresponding to |slot|, e.g. | 
 |   // | 
 |   //   /dev/block/platform/soc.0/7824900.sdhci/by-name/misc -> | 
 |   //   /dev/block/platform/soc.0/7824900.sdhci/by-name/boot_a | 
 |   // | 
 |   // If needed, it's possible to relax the by-name assumption in the | 
 |   // future by trawling /sys/block looking for the appropriate sibling | 
 |   // of misc and then finding an entry in /dev matching the sysfs | 
 |   // entry. | 
 |  | 
 |   std::string err, misc_device = get_bootloader_message_blk_device(&err); | 
 |   if (misc_device.empty()) { | 
 |     LOG(ERROR) << "Unable to get misc block device: " << err; | 
 |     return false; | 
 |   } | 
 |  | 
 |   if (!utils::IsSymlink(misc_device.c_str())) { | 
 |     LOG(ERROR) << "Device file " << misc_device << " for /misc " | 
 |                << "is not a symlink."; | 
 |     return false; | 
 |   } | 
 |   *out = base::FilePath(misc_device).DirName().value(); | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::PreparePartitionsForUpdate( | 
 |     uint32_t source_slot, | 
 |     uint32_t target_slot, | 
 |     const DeltaArchiveManifest& manifest, | 
 |     bool update, | 
 |     uint64_t* required_size) { | 
 |   source_slot_ = source_slot; | 
 |   target_slot_ = target_slot; | 
 |   if (required_size != nullptr) { | 
 |     *required_size = 0; | 
 |   } | 
 |  | 
 |   if (fs_mgr_overlayfs_is_setup()) { | 
 |     // Non DAP devices can use overlayfs as well. | 
 |     LOG(WARNING) | 
 |         << "overlayfs overrides are active and can interfere with our " | 
 |            "resources.\n" | 
 |         << "run adb enable-verity to deactivate if required and try again."; | 
 |   } | 
 |  | 
 |   // If metadata is erased but not formatted, it is possible to not mount | 
 |   // it in recovery. It is acceptable to skip mounting and choose fallback path | 
 |   // (PrepareDynamicPartitionsForUpdate) when sideloading full OTAs. | 
 |   TEST_AND_RETURN_FALSE(EnsureMetadataMounted() || IsRecovery()); | 
 |  | 
 |   if (update) { | 
 |     TEST_AND_RETURN_FALSE(EraseSystemOtherAvbFooter(source_slot, target_slot)); | 
 |   } | 
 |  | 
 |   if (!GetDynamicPartitionsFeatureFlag().IsEnabled()) { | 
 |     return true; | 
 |   } | 
 |  | 
 |   if (target_slot == source_slot) { | 
 |     LOG(ERROR) << "Cannot call PreparePartitionsForUpdate on current slot."; | 
 |     return false; | 
 |   } | 
 |  | 
 |   if (!SetTargetBuildVars(manifest)) { | 
 |     return false; | 
 |   } | 
 |  | 
 |   // Although the current build supports dynamic partitions, the given payload | 
 |   // doesn't use it for target partitions. This could happen when applying a | 
 |   // retrofit update. Skip updating the partition metadata for the target slot. | 
 |   if (!is_target_dynamic_) { | 
 |     return true; | 
 |   } | 
 |  | 
 |   if (!update) | 
 |     return true; | 
 |  | 
 |   bool delete_source = false; | 
 |  | 
 |   if (GetVirtualAbFeatureFlag().IsEnabled()) { | 
 |     // On Virtual A/B device, either CancelUpdate() or BeginUpdate() must be | 
 |     // called before calling UnmapUpdateSnapshot. | 
 |     // - If target_supports_snapshot_, PrepareSnapshotPartitionsForUpdate() | 
 |     //   calls BeginUpdate() which resets update state | 
 |     // - If !target_supports_snapshot_ or PrepareSnapshotPartitionsForUpdate | 
 |     //   failed in recovery, explicitly CancelUpdate(). | 
 |     if (target_supports_snapshot_) { | 
 |       if (PrepareSnapshotPartitionsForUpdate( | 
 |               source_slot, target_slot, manifest, required_size)) { | 
 |         return true; | 
 |       } | 
 |  | 
 |       // Virtual A/B device doing Virtual A/B update in Android mode must use | 
 |       // snapshots. | 
 |       if (!IsRecovery()) { | 
 |         LOG(ERROR) << "PrepareSnapshotPartitionsForUpdate failed in Android " | 
 |                    << "mode"; | 
 |         return false; | 
 |       } | 
 |  | 
 |       delete_source = true; | 
 |       LOG(INFO) << "PrepareSnapshotPartitionsForUpdate failed in recovery. " | 
 |                 << "Attempt to overwrite existing partitions if possible"; | 
 |     } else { | 
 |       // Downgrading to an non-Virtual A/B build or is secondary OTA. | 
 |       LOG(INFO) << "Using regular A/B on Virtual A/B because package disabled " | 
 |                 << "snapshots."; | 
 |     } | 
 |  | 
 |     // In recovery, if /metadata is not mounted, it is likely that metadata | 
 |     // partition is erased and not formatted yet. After sideloading, when | 
 |     // rebooting into the new version, init will erase metadata partition, | 
 |     // hence the failure of CancelUpdate() can be ignored here. | 
 |     // However, if metadata is mounted and CancelUpdate fails, sideloading | 
 |     // should not proceed because during next boot, snapshots will overlay on | 
 |     // the devices incorrectly. | 
 |     if (ExpectMetadataMounted()) { | 
 |       TEST_AND_RETURN_FALSE(snapshot_->CancelUpdate()); | 
 |     } else { | 
 |       LOG(INFO) << "Skip canceling previous update because metadata is not " | 
 |                 << "mounted"; | 
 |     } | 
 |   } | 
 |  | 
 |   // TODO(xunchang) support partial update on non VAB enabled devices. | 
 |   TEST_AND_RETURN_FALSE(PrepareDynamicPartitionsForUpdate( | 
 |       source_slot, target_slot, manifest, delete_source)); | 
 |  | 
 |   if (required_size != nullptr) { | 
 |     *required_size = 0; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::SetTargetBuildVars( | 
 |     const DeltaArchiveManifest& manifest) { | 
 |   // Precondition: current build supports dynamic partition. | 
 |   CHECK(GetDynamicPartitionsFeatureFlag().IsEnabled()); | 
 |  | 
 |   bool is_target_dynamic = | 
 |       !manifest.dynamic_partition_metadata().groups().empty(); | 
 |   bool target_supports_snapshot = | 
 |       manifest.dynamic_partition_metadata().snapshot_enabled(); | 
 |  | 
 |   if (manifest.partial_update()) { | 
 |     // Partial updates requires DAP. On partial updates that does not involve | 
 |     // dynamic partitions, groups() can be empty, so also assume | 
 |     // is_target_dynamic in this case. This assumption should be safe because we | 
 |     // also check target_supports_snapshot below, which presumably also implies | 
 |     // target build supports dynamic partition. | 
 |     if (!is_target_dynamic) { | 
 |       LOG(INFO) << "Assuming target build supports dynamic partitions for " | 
 |                    "partial updates."; | 
 |       is_target_dynamic = true; | 
 |     } | 
 |  | 
 |     // Partial updates requires Virtual A/B. Double check that both current | 
 |     // build and target build supports Virtual A/B. | 
 |     if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
 |       LOG(ERROR) << "Partial update cannot be applied on a device that does " | 
 |                     "not support snapshots."; | 
 |       return false; | 
 |     } | 
 |     if (!target_supports_snapshot) { | 
 |       LOG(ERROR) << "Cannot apply partial update to a build that does not " | 
 |                     "support snapshots."; | 
 |       return false; | 
 |     } | 
 |   } | 
 |  | 
 |   // Store the flags. | 
 |   is_target_dynamic_ = is_target_dynamic; | 
 |   // If !is_target_dynamic_, leave target_supports_snapshot_ unset because | 
 |   // snapshots would not work without dynamic partition. | 
 |   if (is_target_dynamic_) { | 
 |     target_supports_snapshot_ = target_supports_snapshot; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | namespace { | 
 | // Try our best to erase AVB footer. | 
 | class AvbFooterEraser { | 
 |  public: | 
 |   explicit AvbFooterEraser(const std::string& path) : path_(path) {} | 
 |   bool Erase() { | 
 |     // Try to mark the block device read-only. Ignore any | 
 |     // failure since this won't work when passing regular files. | 
 |     ignore_result(utils::SetBlockDeviceReadOnly(path_, false /* readonly */)); | 
 |  | 
 |     fd_.reset(new EintrSafeFileDescriptor()); | 
 |     int flags = O_WRONLY | O_TRUNC | O_CLOEXEC | O_SYNC; | 
 |     TEST_AND_RETURN_FALSE(fd_->Open(path_.c_str(), flags)); | 
 |  | 
 |     // Need to write end-AVB_FOOTER_SIZE to end. | 
 |     static_assert(AVB_FOOTER_SIZE > 0); | 
 |     off64_t offset = fd_->Seek(-AVB_FOOTER_SIZE, SEEK_END); | 
 |     TEST_AND_RETURN_FALSE_ERRNO(offset >= 0); | 
 |     uint64_t write_size = AVB_FOOTER_SIZE; | 
 |     LOG(INFO) << "Zeroing " << path_ << " @ [" << offset << ", " | 
 |               << (offset + write_size) << "] (" << write_size << " bytes)"; | 
 |     brillo::Blob zeros(write_size); | 
 |     TEST_AND_RETURN_FALSE(utils::WriteAll(fd_, zeros.data(), zeros.size())); | 
 |     return true; | 
 |   } | 
 |   ~AvbFooterEraser() { | 
 |     TEST_AND_RETURN(fd_ != nullptr && fd_->IsOpen()); | 
 |     if (!fd_->Close()) { | 
 |       LOG(WARNING) << "Failed to close fd for " << path_; | 
 |     } | 
 |   } | 
 |  | 
 |  private: | 
 |   std::string path_; | 
 |   FileDescriptorPtr fd_; | 
 | }; | 
 |  | 
 | }  // namespace | 
 |  | 
 | std::optional<bool> | 
 | DynamicPartitionControlAndroid::IsAvbEnabledOnSystemOther() { | 
 |   auto prefix = GetProperty(kPostinstallFstabPrefix, ""); | 
 |   if (prefix.empty()) { | 
 |     LOG(WARNING) << "Cannot get " << kPostinstallFstabPrefix; | 
 |     return std::nullopt; | 
 |   } | 
 |   auto path = base::FilePath(prefix).Append("etc/fstab.postinstall").value(); | 
 |   return IsAvbEnabledInFstab(path); | 
 | } | 
 |  | 
 | std::optional<bool> DynamicPartitionControlAndroid::IsAvbEnabledInFstab( | 
 |     const std::string& path) { | 
 |   Fstab fstab; | 
 |   if (!ReadFstabFromFile(path, &fstab)) { | 
 |     PLOG(WARNING) << "Cannot read fstab from " << path; | 
 |     if (errno == ENOENT) { | 
 |       return false; | 
 |     } | 
 |     return std::nullopt; | 
 |   } | 
 |   for (const auto& entry : fstab) { | 
 |     if (!entry.avb_keys.empty()) { | 
 |       return true; | 
 |     } | 
 |   } | 
 |   return false; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::GetSystemOtherPath( | 
 |     uint32_t source_slot, | 
 |     uint32_t target_slot, | 
 |     const std::string& partition_name_suffix, | 
 |     std::string* path, | 
 |     bool* should_unmap) { | 
 |   path->clear(); | 
 |   *should_unmap = false; | 
 |  | 
 |   // Check that AVB is enabled on system_other before erasing. | 
 |   auto has_avb = IsAvbEnabledOnSystemOther(); | 
 |   TEST_AND_RETURN_FALSE(has_avb.has_value()); | 
 |   if (!has_avb.value()) { | 
 |     LOG(INFO) << "AVB is not enabled on system_other. Skip erasing."; | 
 |     return true; | 
 |   } | 
 |  | 
 |   if (!IsRecovery()) { | 
 |     // Found unexpected avb_keys for system_other on devices retrofitting | 
 |     // dynamic partitions. Previous crash in update_engine may leave logical | 
 |     // partitions mapped on physical system_other partition. It is difficult to | 
 |     // handle these cases. Just fail. | 
 |     if (GetDynamicPartitionsFeatureFlag().IsRetrofit()) { | 
 |       LOG(ERROR) << "Cannot erase AVB footer on system_other on devices with " | 
 |                  << "retrofit dynamic partitions. They should not have AVB " | 
 |                  << "enabled on system_other."; | 
 |       return false; | 
 |     } | 
 |   } | 
 |  | 
 |   std::string device_dir_str; | 
 |   TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
 |   base::FilePath device_dir(device_dir_str); | 
 |  | 
 |   // On devices without dynamic partition, search for static partitions. | 
 |   if (!GetDynamicPartitionsFeatureFlag().IsEnabled()) { | 
 |     *path = device_dir.Append(partition_name_suffix).value(); | 
 |     TEST_AND_RETURN_FALSE(DeviceExists(*path)); | 
 |     return true; | 
 |   } | 
 |  | 
 |   auto source_super_device = | 
 |       device_dir.Append(GetSuperPartitionName(source_slot)).value(); | 
 |  | 
 |   auto builder = LoadMetadataBuilder(source_super_device, source_slot); | 
 |   if (builder == nullptr) { | 
 |     if (IsRecovery()) { | 
 |       // It might be corrupted for some reason. It should still be able to | 
 |       // sideload. | 
 |       LOG(WARNING) << "Super partition metadata cannot be read from the source " | 
 |                    << "slot, skip erasing."; | 
 |       return true; | 
 |     } else { | 
 |       // Device has booted into Android mode, indicating that the super | 
 |       // partition metadata should be there. | 
 |       LOG(ERROR) << "Super partition metadata cannot be read from the source " | 
 |                  << "slot. This is unexpected on devices with dynamic " | 
 |                  << "partitions enabled."; | 
 |       return false; | 
 |     } | 
 |   } | 
 |   auto p = builder->FindPartition(partition_name_suffix); | 
 |   if (p == nullptr) { | 
 |     // If the source slot is flashed without system_other, it does not exist | 
 |     // in super partition metadata at source slot. It is safe to skip it. | 
 |     LOG(INFO) << "Can't find " << partition_name_suffix | 
 |               << " in metadata source slot, skip erasing."; | 
 |     return true; | 
 |   } | 
 |   // System_other created by flashing tools should be erased. | 
 |   // If partition is created by update_engine (via NewForUpdate), it is a | 
 |   // left-over partition from the previous update and does not contain | 
 |   // system_other, hence there is no need to erase. | 
 |   // Note the reverse is not necessary true. If the flag is not set, we don't | 
 |   // know if the partition is created by update_engine or by flashing tools | 
 |   // because older versions of super partition metadata does not contain this | 
 |   // flag. It is okay to erase the AVB footer anyways. | 
 |   if (p->attributes() & LP_PARTITION_ATTR_UPDATED) { | 
 |     LOG(INFO) << partition_name_suffix | 
 |               << " does not contain system_other, skip erasing."; | 
 |     return true; | 
 |   } | 
 |  | 
 |   if (p->size() < AVB_FOOTER_SIZE) { | 
 |     LOG(INFO) << partition_name_suffix << " has length " << p->size() | 
 |               << "( < AVB_FOOTER_SIZE " << AVB_FOOTER_SIZE | 
 |               << "), skip erasing."; | 
 |     return true; | 
 |   } | 
 |  | 
 |   // Delete any pre-existing device with name |partition_name_suffix| and | 
 |   // also remove it from |mapped_devices_|. | 
 |   // In recovery, metadata might not be mounted, and | 
 |   // UnmapPartitionOnDeviceMapper might fail. However, | 
 |   // it is unusual that system_other has already been mapped. Hence, just skip. | 
 |   TEST_AND_RETURN_FALSE(UnmapPartitionOnDeviceMapper(partition_name_suffix)); | 
 |   // Use CreateLogicalPartition directly to avoid mapping with existing | 
 |   // snapshots. | 
 |   CreateLogicalPartitionParams params = { | 
 |       .block_device = source_super_device, | 
 |       .metadata_slot = source_slot, | 
 |       .partition_name = partition_name_suffix, | 
 |       .force_writable = true, | 
 |       .timeout_ms = kMapTimeout, | 
 |   }; | 
 |   TEST_AND_RETURN_FALSE(CreateLogicalPartition(params, path)); | 
 |   *should_unmap = true; | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::EraseSystemOtherAvbFooter( | 
 |     uint32_t source_slot, uint32_t target_slot) { | 
 |   LOG(INFO) << "Erasing AVB footer of system_other partition before update."; | 
 |  | 
 |   const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); | 
 |   const std::string partition_name_suffix = "system" + target_suffix; | 
 |  | 
 |   std::string path; | 
 |   bool should_unmap = false; | 
 |  | 
 |   TEST_AND_RETURN_FALSE(GetSystemOtherPath( | 
 |       source_slot, target_slot, partition_name_suffix, &path, &should_unmap)); | 
 |  | 
 |   if (path.empty()) { | 
 |     return true; | 
 |   } | 
 |  | 
 |   bool ret = AvbFooterEraser(path).Erase(); | 
 |  | 
 |   // Delete |partition_name_suffix| from device mapper and from | 
 |   // |mapped_devices_| again so that it does not interfere with update process. | 
 |   // In recovery, metadata might not be mounted, and | 
 |   // UnmapPartitionOnDeviceMapper might fail. However, DestroyLogicalPartition | 
 |   // should be called. If DestroyLogicalPartition does fail, it is still okay | 
 |   // to skip the error here and let Prepare*() fail later. | 
 |   if (should_unmap) { | 
 |     TEST_AND_RETURN_FALSE(UnmapPartitionOnDeviceMapper(partition_name_suffix)); | 
 |   } | 
 |  | 
 |   return ret; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::PrepareDynamicPartitionsForUpdate( | 
 |     uint32_t source_slot, | 
 |     uint32_t target_slot, | 
 |     const DeltaArchiveManifest& manifest, | 
 |     bool delete_source) { | 
 |   const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); | 
 |  | 
 |   // Unmap all the target dynamic partitions because they would become | 
 |   // inconsistent with the new metadata. | 
 |   for (const auto& group : manifest.dynamic_partition_metadata().groups()) { | 
 |     for (const auto& partition_name : group.partition_names()) { | 
 |       if (!UnmapPartitionOnDeviceMapper(partition_name + target_suffix)) { | 
 |         return false; | 
 |       } | 
 |     } | 
 |   } | 
 |  | 
 |   std::string device_dir_str; | 
 |   TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
 |   base::FilePath device_dir(device_dir_str); | 
 |   auto source_device = | 
 |       device_dir.Append(GetSuperPartitionName(source_slot)).value(); | 
 |  | 
 |   auto builder = LoadMetadataBuilder(source_device, source_slot, target_slot); | 
 |   if (builder == nullptr) { | 
 |     LOG(ERROR) << "No metadata at " | 
 |                << BootControlInterface::SlotName(source_slot); | 
 |     return false; | 
 |   } | 
 |  | 
 |   if (delete_source) { | 
 |     TEST_AND_RETURN_FALSE( | 
 |         DeleteSourcePartitions(builder.get(), source_slot, manifest)); | 
 |   } | 
 |  | 
 |   TEST_AND_RETURN_FALSE( | 
 |       UpdatePartitionMetadata(builder.get(), target_slot, manifest)); | 
 |  | 
 |   auto target_device = | 
 |       device_dir.Append(GetSuperPartitionName(target_slot)).value(); | 
 |   return StoreMetadata(target_device, builder.get(), target_slot); | 
 | } | 
 |  | 
 | DynamicPartitionControlAndroid::SpaceLimit | 
 | DynamicPartitionControlAndroid::GetSpaceLimit(bool use_snapshot) { | 
 |   // On device retrofitting dynamic partitions, allocatable_space = "super", | 
 |   // where "super" is the sum of all block devices for that slot. Since block | 
 |   // devices are dedicated for the corresponding slot, there's no need to halve | 
 |   // the allocatable space. | 
 |   if (GetDynamicPartitionsFeatureFlag().IsRetrofit()) | 
 |     return SpaceLimit::ERROR_IF_EXCEEDED_SUPER; | 
 |  | 
 |   // On device launching dynamic partitions w/o VAB, regardless of recovery | 
 |   // sideload, super partition must be big enough to hold both A and B slots of | 
 |   // groups. Hence, | 
 |   // allocatable_space = super / 2 | 
 |   if (!GetVirtualAbFeatureFlag().IsEnabled()) | 
 |     return SpaceLimit::ERROR_IF_EXCEEDED_HALF_OF_SUPER; | 
 |  | 
 |   // Source build supports VAB. Super partition must be big enough to hold | 
 |   // one slot of groups (ERROR_IF_EXCEEDED_SUPER). However, there are cases | 
 |   // where additional warning messages needs to be written. | 
 |  | 
 |   // If using snapshot updates, implying that target build also uses VAB, | 
 |   // allocatable_space = super | 
 |   if (use_snapshot) | 
 |     return SpaceLimit::ERROR_IF_EXCEEDED_SUPER; | 
 |  | 
 |   // Source build supports VAB but not using snapshot updates. There are | 
 |   // several cases, as listed below. | 
 |   // Sideloading: allocatable_space = super. | 
 |   if (IsRecovery()) | 
 |     return SpaceLimit::ERROR_IF_EXCEEDED_SUPER; | 
 |  | 
 |   // On launch VAB device, this implies secondary payload. | 
 |   // Technically, we don't have to check anything, but sum(groups) < super | 
 |   // still applies. | 
 |   if (!GetVirtualAbFeatureFlag().IsRetrofit()) | 
 |     return SpaceLimit::ERROR_IF_EXCEEDED_SUPER; | 
 |  | 
 |   // On retrofit VAB device, either of the following: | 
 |   // - downgrading: allocatable_space = super / 2 | 
 |   // - secondary payload: don't check anything | 
 |   // These two cases are indistinguishable, | 
 |   // hence emit warning if sum(groups) > super / 2 | 
 |   return SpaceLimit::WARN_IF_EXCEEDED_HALF_OF_SUPER; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::CheckSuperPartitionAllocatableSpace( | 
 |     android::fs_mgr::MetadataBuilder* builder, | 
 |     const DeltaArchiveManifest& manifest, | 
 |     bool use_snapshot) { | 
 |   uint64_t sum_groups = 0; | 
 |   for (const auto& group : manifest.dynamic_partition_metadata().groups()) { | 
 |     sum_groups += group.size(); | 
 |   } | 
 |  | 
 |   uint64_t full_space = builder->AllocatableSpace(); | 
 |   uint64_t half_space = full_space / 2; | 
 |   constexpr const char* fmt = | 
 |       "The maximum size of all groups for the target slot (%" PRIu64 | 
 |       ") has exceeded %sallocatable space for dynamic partitions %" PRIu64 "."; | 
 |   switch (GetSpaceLimit(use_snapshot)) { | 
 |     case SpaceLimit::ERROR_IF_EXCEEDED_HALF_OF_SUPER: { | 
 |       if (sum_groups > half_space) { | 
 |         LOG(ERROR) << StringPrintf(fmt, sum_groups, "HALF OF ", half_space); | 
 |         return false; | 
 |       } | 
 |       // If test passes, it implies that the following two conditions also pass. | 
 |       break; | 
 |     } | 
 |     case SpaceLimit::WARN_IF_EXCEEDED_HALF_OF_SUPER: { | 
 |       if (sum_groups > half_space) { | 
 |         LOG(WARNING) << StringPrintf(fmt, sum_groups, "HALF OF ", half_space) | 
 |                      << " This is allowed for downgrade or secondary OTA on " | 
 |                         "retrofit VAB device."; | 
 |       } | 
 |       // still check sum(groups) < super | 
 |       [[fallthrough]]; | 
 |     } | 
 |     case SpaceLimit::ERROR_IF_EXCEEDED_SUPER: { | 
 |       if (sum_groups > full_space) { | 
 |         LOG(ERROR) << base::StringPrintf(fmt, sum_groups, "", full_space); | 
 |         return false; | 
 |       } | 
 |       break; | 
 |     } | 
 |   } | 
 |  | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::PrepareSnapshotPartitionsForUpdate( | 
 |     uint32_t source_slot, | 
 |     uint32_t target_slot, | 
 |     const DeltaArchiveManifest& manifest, | 
 |     uint64_t* required_size) { | 
 |   TEST_AND_RETURN_FALSE(ExpectMetadataMounted()); | 
 |  | 
 |   std::string device_dir_str; | 
 |   TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
 |   base::FilePath device_dir(device_dir_str); | 
 |   auto super_device = | 
 |       device_dir.Append(GetSuperPartitionName(source_slot)).value(); | 
 |   auto builder = LoadMetadataBuilder(super_device, source_slot); | 
 |   if (builder == nullptr) { | 
 |     LOG(ERROR) << "No metadata at " | 
 |                << BootControlInterface::SlotName(source_slot); | 
 |     return false; | 
 |   } | 
 |  | 
 |   TEST_AND_RETURN_FALSE( | 
 |       CheckSuperPartitionAllocatableSpace(builder.get(), manifest, true)); | 
 |  | 
 |   if (!snapshot_->BeginUpdate()) { | 
 |     LOG(ERROR) << "Cannot begin new update."; | 
 |     return false; | 
 |   } | 
 |   auto ret = snapshot_->CreateUpdateSnapshots(manifest); | 
 |   if (!ret) { | 
 |     LOG(ERROR) << "Cannot create update snapshots: " << ret.string(); | 
 |     if (required_size != nullptr && | 
 |         ret.error_code() == Return::ErrorCode::NO_SPACE) { | 
 |       *required_size = ret.required_size(); | 
 |     } | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | std::string DynamicPartitionControlAndroid::GetSuperPartitionName( | 
 |     uint32_t slot) { | 
 |   return fs_mgr_get_super_partition_name(slot); | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::UpdatePartitionMetadata( | 
 |     MetadataBuilder* builder, | 
 |     uint32_t target_slot, | 
 |     const DeltaArchiveManifest& manifest) { | 
 |   // Check preconditions. | 
 |   if (GetVirtualAbFeatureFlag().IsEnabled()) { | 
 |     CHECK(!target_supports_snapshot_ || IsRecovery()) | 
 |         << "Must use snapshot on VAB device when target build supports VAB and " | 
 |            "not sideloading."; | 
 |     LOG_IF(INFO, !target_supports_snapshot_) | 
 |         << "Not using snapshot on VAB device because target build does not " | 
 |            "support snapshot. Secondary or downgrade OTA?"; | 
 |     LOG_IF(INFO, IsRecovery()) | 
 |         << "Not using snapshot on VAB device because sideloading."; | 
 |   } | 
 |  | 
 |   // If applying downgrade from Virtual A/B to non-Virtual A/B, the left-over | 
 |   // COW group needs to be deleted to ensure there are enough space to create | 
 |   // target partitions. | 
 |   builder->RemoveGroupAndPartitions(android::snapshot::kCowGroupName); | 
 |  | 
 |   const std::string target_suffix = SlotSuffixForSlotNumber(target_slot); | 
 |   DeleteGroupsWithSuffix(builder, target_suffix); | 
 |  | 
 |   TEST_AND_RETURN_FALSE( | 
 |       CheckSuperPartitionAllocatableSpace(builder, manifest, false)); | 
 |  | 
 |   // name of partition(e.g. "system") -> size in bytes | 
 |   std::map<std::string, uint64_t> partition_sizes; | 
 |   for (const auto& partition : manifest.partitions()) { | 
 |     partition_sizes.emplace(partition.partition_name(), | 
 |                             partition.new_partition_info().size()); | 
 |   } | 
 |  | 
 |   for (const auto& group : manifest.dynamic_partition_metadata().groups()) { | 
 |     auto group_name_suffix = group.name() + target_suffix; | 
 |     if (!builder->AddGroup(group_name_suffix, group.size())) { | 
 |       LOG(ERROR) << "Cannot add group " << group_name_suffix << " with size " | 
 |                  << group.size(); | 
 |       return false; | 
 |     } | 
 |     LOG(INFO) << "Added group " << group_name_suffix << " with size " | 
 |               << group.size(); | 
 |  | 
 |     for (const auto& partition_name : group.partition_names()) { | 
 |       auto partition_sizes_it = partition_sizes.find(partition_name); | 
 |       if (partition_sizes_it == partition_sizes.end()) { | 
 |         // TODO(tbao): Support auto-filling partition info for framework-only | 
 |         // OTA. | 
 |         LOG(ERROR) << "dynamic_partition_metadata contains partition " | 
 |                    << partition_name << " but it is not part of the manifest. " | 
 |                    << "This is not supported."; | 
 |         return false; | 
 |       } | 
 |       uint64_t partition_size = partition_sizes_it->second; | 
 |  | 
 |       auto partition_name_suffix = partition_name + target_suffix; | 
 |       Partition* p = builder->AddPartition( | 
 |           partition_name_suffix, group_name_suffix, LP_PARTITION_ATTR_READONLY); | 
 |       if (!p) { | 
 |         LOG(ERROR) << "Cannot add partition " << partition_name_suffix | 
 |                    << " to group " << group_name_suffix; | 
 |         return false; | 
 |       } | 
 |       if (!builder->ResizePartition(p, partition_size)) { | 
 |         LOG(ERROR) << "Cannot resize partition " << partition_name_suffix | 
 |                    << " to size " << partition_size << ". Not enough space?"; | 
 |         return false; | 
 |       } | 
 |       if (p->size() < partition_size) { | 
 |         LOG(ERROR) << "Partition " << partition_name_suffix | 
 |                    << " was expected to have size " << partition_size | 
 |                    << ", but instead has size " << p->size(); | 
 |         return false; | 
 |       } | 
 |       LOG(INFO) << "Added partition " << partition_name_suffix << " to group " | 
 |                 << group_name_suffix << " with size " << partition_size; | 
 |     } | 
 |   } | 
 |  | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::FinishUpdate(bool powerwash_required) { | 
 |   if (ExpectMetadataMounted()) { | 
 |     if (snapshot_->GetUpdateState() == UpdateState::Initiated) { | 
 |       LOG(INFO) << "Snapshot writes are done."; | 
 |       return snapshot_->FinishedSnapshotWrites(powerwash_required); | 
 |     } | 
 |   } else { | 
 |     LOG(INFO) << "Skip FinishedSnapshotWrites() because /metadata is not " | 
 |               << "mounted"; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::GetPartitionDevice( | 
 |     const std::string& partition_name, | 
 |     uint32_t slot, | 
 |     uint32_t current_slot, | 
 |     bool not_in_payload, | 
 |     std::string* device, | 
 |     bool* is_dynamic) { | 
 |   auto partition_dev = | 
 |       GetPartitionDevice(partition_name, slot, current_slot, not_in_payload); | 
 |   if (!partition_dev.has_value()) { | 
 |     return false; | 
 |   } | 
 |   if (device) { | 
 |     *device = std::move(partition_dev->rw_device_path); | 
 |   } | 
 |   if (is_dynamic) { | 
 |     *is_dynamic = partition_dev->is_dynamic; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::GetPartitionDevice( | 
 |     const std::string& partition_name, | 
 |     uint32_t slot, | 
 |     uint32_t current_slot, | 
 |     std::string* device) { | 
 |   return GetPartitionDevice( | 
 |       partition_name, slot, current_slot, false, device, nullptr); | 
 | } | 
 |  | 
 | static std::string GetStaticDevicePath( | 
 |     const base::FilePath& device_dir, | 
 |     const std::string& partition_name_suffixed) { | 
 |   base::FilePath path = device_dir.Append(partition_name_suffixed); | 
 |   return path.value(); | 
 | } | 
 |  | 
 | std::optional<PartitionDevice> | 
 | DynamicPartitionControlAndroid::GetPartitionDevice( | 
 |     const std::string& partition_name, | 
 |     uint32_t slot, | 
 |     uint32_t current_slot, | 
 |     bool not_in_payload) { | 
 |   std::string device_dir_str; | 
 |   if (!GetDeviceDir(&device_dir_str)) { | 
 |     LOG(ERROR) << "Failed to GetDeviceDir()"; | 
 |     return {}; | 
 |   } | 
 |   const base::FilePath device_dir(device_dir_str); | 
 |   // When VABC is enabled, we can't get device path for dynamic partitions in | 
 |   // target slot. | 
 |   const auto& partition_name_suffix = | 
 |       partition_name + SlotSuffixForSlotNumber(slot); | 
 |   if (UpdateUsesSnapshotCompression() && slot != current_slot && | 
 |       IsDynamicPartition(partition_name, slot)) { | 
 |     return { | 
 |         {.readonly_device_path = base::FilePath{std::string{VABC_DEVICE_DIR}} | 
 |                                      .Append(partition_name_suffix) | 
 |                                      .value(), | 
 |          .is_dynamic = true}}; | 
 |   } | 
 |  | 
 |   // When looking up target partition devices, treat them as static if the | 
 |   // current payload doesn't encode them as dynamic partitions. This may happen | 
 |   // when applying a retrofit update on top of a dynamic-partitions-enabled | 
 |   // build. | 
 |   std::string device; | 
 |   if (GetDynamicPartitionsFeatureFlag().IsEnabled() && | 
 |       (slot == current_slot || is_target_dynamic_)) { | 
 |     switch (GetDynamicPartitionDevice(device_dir, | 
 |                                       partition_name_suffix, | 
 |                                       slot, | 
 |                                       current_slot, | 
 |                                       not_in_payload, | 
 |                                       &device)) { | 
 |       case DynamicPartitionDeviceStatus::SUCCESS: | 
 |         return {{.rw_device_path = device, | 
 |                  .readonly_device_path = device, | 
 |                  .is_dynamic = true}}; | 
 |  | 
 |       case DynamicPartitionDeviceStatus::TRY_STATIC: | 
 |         break; | 
 |       case DynamicPartitionDeviceStatus::ERROR:  // fallthrough | 
 |       default: | 
 |         return {}; | 
 |     } | 
 |   } | 
 |   // Try static partitions. | 
 |   auto static_path = GetStaticDevicePath(device_dir, partition_name_suffix); | 
 |   if (!DeviceExists(static_path)) { | 
 |     LOG(ERROR) << "Device file " << static_path << " does not exist."; | 
 |     return {}; | 
 |   } | 
 |  | 
 |   return {{.rw_device_path = static_path, | 
 |            .readonly_device_path = static_path, | 
 |            .is_dynamic = false}}; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::IsSuperBlockDevice( | 
 |     const base::FilePath& device_dir, | 
 |     uint32_t current_slot, | 
 |     const std::string& partition_name_suffix) { | 
 |   std::string source_device = | 
 |       device_dir.Append(GetSuperPartitionName(current_slot)).value(); | 
 |   auto source_metadata = LoadMetadataBuilder(source_device, current_slot); | 
 |   return source_metadata->HasBlockDevice(partition_name_suffix); | 
 | } | 
 |  | 
 | DynamicPartitionControlAndroid::DynamicPartitionDeviceStatus | 
 | DynamicPartitionControlAndroid::GetDynamicPartitionDevice( | 
 |     const base::FilePath& device_dir, | 
 |     const std::string& partition_name_suffix, | 
 |     uint32_t slot, | 
 |     uint32_t current_slot, | 
 |     bool not_in_payload, | 
 |     std::string* device) { | 
 |   std::string super_device = | 
 |       device_dir.Append(GetSuperPartitionName(slot)).value(); | 
 |  | 
 |   auto builder = LoadMetadataBuilder(super_device, slot); | 
 |   if (builder == nullptr) { | 
 |     LOG(ERROR) << "No metadata in slot " | 
 |                << BootControlInterface::SlotName(slot); | 
 |     return DynamicPartitionDeviceStatus::ERROR; | 
 |   } | 
 |   if (builder->FindPartition(partition_name_suffix) == nullptr) { | 
 |     LOG(INFO) << partition_name_suffix | 
 |               << " is not in super partition metadata."; | 
 |  | 
 |     if (IsSuperBlockDevice(device_dir, current_slot, partition_name_suffix)) { | 
 |       LOG(ERROR) << "The static partition " << partition_name_suffix | 
 |                  << " is a block device for current metadata." | 
 |                  << "It cannot be used as a logical partition."; | 
 |       return DynamicPartitionDeviceStatus::ERROR; | 
 |     } | 
 |  | 
 |     return DynamicPartitionDeviceStatus::TRY_STATIC; | 
 |   } | 
 |  | 
 |   if (slot == current_slot) { | 
 |     if (GetState(partition_name_suffix) != DmDeviceState::ACTIVE) { | 
 |       LOG(WARNING) << partition_name_suffix << " is at current slot but it is " | 
 |                    << "not mapped. Now try to map it."; | 
 |     } else { | 
 |       if (GetDmDevicePathByName(partition_name_suffix, device)) { | 
 |         LOG(INFO) << partition_name_suffix | 
 |                   << " is mapped on device mapper: " << *device; | 
 |         return DynamicPartitionDeviceStatus::SUCCESS; | 
 |       } | 
 |       LOG(ERROR) << partition_name_suffix << "is mapped but path is unknown."; | 
 |       return DynamicPartitionDeviceStatus::ERROR; | 
 |     } | 
 |   } | 
 |  | 
 |   bool force_writable = (slot != current_slot) && !not_in_payload; | 
 |   if (MapPartitionOnDeviceMapper( | 
 |           super_device, partition_name_suffix, slot, force_writable, device)) { | 
 |     return DynamicPartitionDeviceStatus::SUCCESS; | 
 |   } | 
 |   return DynamicPartitionDeviceStatus::ERROR; | 
 | } | 
 |  | 
 | void DynamicPartitionControlAndroid::set_fake_mapped_devices( | 
 |     const std::set<std::string>& fake) { | 
 |   mapped_devices_ = fake; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::IsRecovery() { | 
 |   return constants::kIsRecovery; | 
 | } | 
 |  | 
 | static bool IsIncrementalUpdate(const DeltaArchiveManifest& manifest) { | 
 |   const auto& partitions = manifest.partitions(); | 
 |   return std::any_of(partitions.begin(), partitions.end(), [](const auto& p) { | 
 |     return p.has_old_partition_info(); | 
 |   }); | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::DeleteSourcePartitions( | 
 |     MetadataBuilder* builder, | 
 |     uint32_t source_slot, | 
 |     const DeltaArchiveManifest& manifest) { | 
 |   TEST_AND_RETURN_FALSE(IsRecovery()); | 
 |  | 
 |   if (IsIncrementalUpdate(manifest)) { | 
 |     LOG(ERROR) << "Cannot sideload incremental OTA because snapshots cannot " | 
 |                << "be created."; | 
 |     if (GetVirtualAbFeatureFlag().IsLaunch()) { | 
 |       LOG(ERROR) << "Sideloading incremental updates on devices launches " | 
 |                  << " Virtual A/B is not supported."; | 
 |     } | 
 |     return false; | 
 |   } | 
 |  | 
 |   LOG(INFO) << "Will overwrite existing partitions. Slot " | 
 |             << BootControlInterface::SlotName(source_slot) | 
 |             << " may be unbootable until update finishes!"; | 
 |   const std::string source_suffix = SlotSuffixForSlotNumber(source_slot); | 
 |   DeleteGroupsWithSuffix(builder, source_suffix); | 
 |  | 
 |   return true; | 
 | } | 
 |  | 
 | std::unique_ptr<AbstractAction> | 
 | DynamicPartitionControlAndroid::GetCleanupPreviousUpdateAction( | 
 |     BootControlInterface* boot_control, | 
 |     PrefsInterface* prefs, | 
 |     CleanupPreviousUpdateActionDelegateInterface* delegate) { | 
 |   if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
 |     return std::make_unique<NoOpAction>(); | 
 |   } | 
 |   return std::make_unique<CleanupPreviousUpdateAction>( | 
 |       prefs, boot_control, snapshot_.get(), delegate); | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::ResetUpdate(PrefsInterface* prefs) { | 
 |   if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
 |     return true; | 
 |   } | 
 |  | 
 |   LOG(INFO) << __func__ << " resetting update state and deleting snapshots."; | 
 |   TEST_AND_RETURN_FALSE(prefs != nullptr); | 
 |  | 
 |   // If the device has already booted into the target slot, | 
 |   // ResetUpdateProgress may pass but CancelUpdate fails. | 
 |   // This is expected. A scheduled CleanupPreviousUpdateAction should free | 
 |   // space when it is done. | 
 |   TEST_AND_RETURN_FALSE(DeltaPerformer::ResetUpdateProgress( | 
 |       prefs, false /* quick */, false /* skip dynamic partitions metadata */)); | 
 |  | 
 |   if (ExpectMetadataMounted()) { | 
 |     TEST_AND_RETURN_FALSE(snapshot_->CancelUpdate()); | 
 |   } else { | 
 |     LOG(INFO) << "Skip cancelling update in ResetUpdate because /metadata is " | 
 |               << "not mounted"; | 
 |   } | 
 |  | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::ListDynamicPartitionsForSlot( | 
 |     uint32_t slot, | 
 |     uint32_t current_slot, | 
 |     std::vector<std::string>* partitions) { | 
 |   CHECK(slot == source_slot_ || target_slot_ != UINT32_MAX) | 
 |       << " source slot: " << source_slot_ << " target slot: " << target_slot_ | 
 |       << " slot: " << slot | 
 |       << " attempting to query dynamic partition metadata for target slot " | 
 |          "before PreparePartitionForUpdate() is called. The " | 
 |          "metadata in target slot isn't valid until " | 
 |          "PreparePartitionForUpdate() is called, contining execution would " | 
 |          "likely cause problems."; | 
 |   bool slot_enables_dynamic_partitions = | 
 |       GetDynamicPartitionsFeatureFlag().IsEnabled(); | 
 |   // Check if the target slot has dynamic partitions, this may happen when | 
 |   // applying a retrofit package. | 
 |   if (slot != current_slot) { | 
 |     slot_enables_dynamic_partitions = | 
 |         slot_enables_dynamic_partitions && is_target_dynamic_; | 
 |   } | 
 |  | 
 |   if (!slot_enables_dynamic_partitions) { | 
 |     LOG(INFO) << "Dynamic partition is not enabled for slot " << slot; | 
 |     return true; | 
 |   } | 
 |  | 
 |   std::string device_dir_str; | 
 |   TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
 |   base::FilePath device_dir(device_dir_str); | 
 |   auto super_device = device_dir.Append(GetSuperPartitionName(slot)).value(); | 
 |   auto builder = LoadMetadataBuilder(super_device, slot); | 
 |   TEST_AND_RETURN_FALSE(builder != nullptr); | 
 |  | 
 |   std::vector<std::string> result; | 
 |   auto suffix = SlotSuffixForSlotNumber(slot); | 
 |   for (const auto& group : builder->ListGroups()) { | 
 |     for (const auto& partition : builder->ListPartitionsInGroup(group)) { | 
 |       std::string_view partition_name = partition->name(); | 
 |       if (!android::base::ConsumeSuffix(&partition_name, suffix)) { | 
 |         continue; | 
 |       } | 
 |       result.emplace_back(partition_name); | 
 |     } | 
 |   } | 
 |   *partitions = std::move(result); | 
 |   return true; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::VerifyExtentsForUntouchedPartitions( | 
 |     uint32_t source_slot, | 
 |     uint32_t target_slot, | 
 |     const std::vector<std::string>& partitions) { | 
 |   std::string device_dir_str; | 
 |   TEST_AND_RETURN_FALSE(GetDeviceDir(&device_dir_str)); | 
 |   base::FilePath device_dir(device_dir_str); | 
 |  | 
 |   auto source_super_device = | 
 |       device_dir.Append(GetSuperPartitionName(source_slot)).value(); | 
 |   auto source_builder = LoadMetadataBuilder(source_super_device, source_slot); | 
 |   TEST_AND_RETURN_FALSE(source_builder != nullptr); | 
 |  | 
 |   auto target_super_device = | 
 |       device_dir.Append(GetSuperPartitionName(target_slot)).value(); | 
 |   auto target_builder = LoadMetadataBuilder(target_super_device, target_slot); | 
 |   TEST_AND_RETURN_FALSE(target_builder != nullptr); | 
 |  | 
 |   return MetadataBuilder::VerifyExtentsAgainstSourceMetadata( | 
 |       *source_builder, source_slot, *target_builder, target_slot, partitions); | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::ExpectMetadataMounted() { | 
 |   // No need to mount metadata for non-Virtual A/B devices. | 
 |   if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
 |     return false; | 
 |   } | 
 |   // Intentionally not checking |metadata_device_| in Android mode. | 
 |   // /metadata should always be mounted in Android mode. If it isn't, let caller | 
 |   // fails when calling into SnapshotManager. | 
 |   if (!IsRecovery()) { | 
 |     return true; | 
 |   } | 
 |   // In recovery mode, explicitly check |metadata_device_|. | 
 |   return metadata_device_ != nullptr; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::EnsureMetadataMounted() { | 
 |   // No need to mount metadata for non-Virtual A/B devices. | 
 |   if (!GetVirtualAbFeatureFlag().IsEnabled()) { | 
 |     return true; | 
 |   } | 
 |  | 
 |   if (metadata_device_ == nullptr) { | 
 |     metadata_device_ = snapshot_->EnsureMetadataMounted(); | 
 |   } | 
 |   return metadata_device_ != nullptr; | 
 | } | 
 |  | 
 | std::unique_ptr<android::snapshot::ISnapshotWriter> | 
 | DynamicPartitionControlAndroid::OpenCowWriter( | 
 |     const std::string& partition_name, | 
 |     const std::optional<std::string>& source_path, | 
 |     bool is_append) { | 
 |   auto suffix = SlotSuffixForSlotNumber(target_slot_); | 
 |  | 
 |   auto super_device = GetSuperDevice(); | 
 |   if (!super_device.has_value()) { | 
 |     return nullptr; | 
 |   } | 
 |   CreateLogicalPartitionParams params = { | 
 |       .block_device = super_device->value(), | 
 |       .metadata_slot = target_slot_, | 
 |       .partition_name = partition_name + suffix, | 
 |       .force_writable = true, | 
 |       .timeout_ms = kMapSnapshotTimeout}; | 
 |   // TODO(zhangkelvin) Open an APPEND mode CowWriter once there's an API to do | 
 |   // it. | 
 |   return snapshot_->OpenSnapshotWriter(params, std::move(source_path)); | 
 | }  // namespace chromeos_update_engine | 
 |  | 
 | FileDescriptorPtr DynamicPartitionControlAndroid::OpenCowFd( | 
 |     const std::string& unsuffixed_partition_name, | 
 |     const std::optional<std::string>& source_path, | 
 |     bool is_append) { | 
 |   auto cow_writer = | 
 |       OpenCowWriter(unsuffixed_partition_name, source_path, is_append); | 
 |   if (cow_writer == nullptr) { | 
 |     return nullptr; | 
 |   } | 
 |   if (!cow_writer->InitializeAppend(kEndOfInstallLabel)) { | 
 |     return nullptr; | 
 |   } | 
 |   return std::make_shared<CowWriterFileDescriptor>(std::move(cow_writer)); | 
 | } | 
 |  | 
 | std::optional<base::FilePath> DynamicPartitionControlAndroid::GetSuperDevice() { | 
 |   std::string device_dir_str; | 
 |   if (!GetDeviceDir(&device_dir_str)) { | 
 |     LOG(ERROR) << "Failed to get device dir!"; | 
 |     return {}; | 
 |   } | 
 |   base::FilePath device_dir(device_dir_str); | 
 |   auto super_device = device_dir.Append(GetSuperPartitionName(target_slot_)); | 
 |   return super_device; | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::MapAllPartitions() { | 
 |   return snapshot_->MapAllSnapshots(kMapSnapshotTimeout); | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::IsDynamicPartition( | 
 |     const std::string& partition_name, uint32_t slot) { | 
 |   if (slot >= dynamic_partition_list_.size()) { | 
 |     LOG(ERROR) << "Seeing unexpected slot # " << slot << " currently assuming " | 
 |                << dynamic_partition_list_.size() << " slots"; | 
 |     return false; | 
 |   } | 
 |   auto& dynamic_partition_list = dynamic_partition_list_[slot]; | 
 |   if (dynamic_partition_list.empty() && | 
 |       GetDynamicPartitionsFeatureFlag().IsEnabled()) { | 
 |     // Use the DAP config of the target slot. | 
 |     CHECK(ListDynamicPartitionsForSlot( | 
 |         slot, source_slot_, &dynamic_partition_list)); | 
 |   } | 
 |   return std::find(dynamic_partition_list.begin(), | 
 |                    dynamic_partition_list.end(), | 
 |                    partition_name) != dynamic_partition_list.end(); | 
 | } | 
 |  | 
 | bool DynamicPartitionControlAndroid::UpdateUsesSnapshotCompression() { | 
 |   return GetVirtualAbFeatureFlag().IsEnabled() && | 
 |          snapshot_->UpdateUsesCompression(); | 
 | } | 
 |  | 
 | }  // namespace chromeos_update_engine |