| // | 
 | // Copyright (C) 2012 The Android Open Source Project | 
 | // | 
 | // Licensed under the Apache License, Version 2.0 (the "License"); | 
 | // you may not use this file except in compliance with the License. | 
 | // You may obtain a copy of the License at | 
 | // | 
 | //      http://www.apache.org/licenses/LICENSE-2.0 | 
 | // | 
 | // Unless required by applicable law or agreed to in writing, software | 
 | // distributed under the License is distributed on an "AS IS" BASIS, | 
 | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 | // See the License for the specific language governing permissions and | 
 | // limitations under the License. | 
 | // | 
 |  | 
 | #include "update_engine/common_service.h" | 
 |  | 
 | #include <set> | 
 | #include <string> | 
 |  | 
 | #include <base/location.h> | 
 | #include <base/logging.h> | 
 | #include <base/strings/stringprintf.h> | 
 | #include <brillo/bind_lambda.h> | 
 | #include <brillo/message_loops/message_loop.h> | 
 | #include <brillo/strings/string_utils.h> | 
 | #include <policy/device_policy.h> | 
 |  | 
 | #include "update_engine/common/clock_interface.h" | 
 | #include "update_engine/common/hardware_interface.h" | 
 | #include "update_engine/common/prefs.h" | 
 | #include "update_engine/common/utils.h" | 
 | #include "update_engine/connection_manager_interface.h" | 
 | #include "update_engine/omaha_request_params.h" | 
 | #include "update_engine/omaha_utils.h" | 
 | #include "update_engine/p2p_manager.h" | 
 | #include "update_engine/payload_state_interface.h" | 
 | #include "update_engine/update_attempter.h" | 
 |  | 
 | using base::StringPrintf; | 
 | using brillo::ErrorPtr; | 
 | using brillo::string_utils::ToString; | 
 | using std::set; | 
 | using std::string; | 
 |  | 
 | namespace chromeos_update_engine { | 
 |  | 
 | namespace { | 
 | // Log and set the error on the passed ErrorPtr. | 
 | void LogAndSetError(ErrorPtr* error, | 
 |                     const tracked_objects::Location& location, | 
 |                     const string& reason) { | 
 |   brillo::Error::AddTo(error, | 
 |                        location, | 
 |                        UpdateEngineService::kErrorDomain, | 
 |                        UpdateEngineService::kErrorFailed, | 
 |                        reason); | 
 |   LOG(ERROR) << "Sending Update Engine Failure: " << location.ToString() << ": " | 
 |              << reason; | 
 | } | 
 | }  // namespace | 
 |  | 
 | const char* const UpdateEngineService::kErrorDomain = "update_engine"; | 
 | const char* const UpdateEngineService::kErrorFailed = | 
 |     "org.chromium.UpdateEngine.Error.Failed"; | 
 |  | 
 | UpdateEngineService::UpdateEngineService(SystemState* system_state) | 
 |     : system_state_(system_state) { | 
 | } | 
 |  | 
 | // org::chromium::UpdateEngineInterfaceInterface methods implementation. | 
 |  | 
 | bool UpdateEngineService::AttemptUpdate(ErrorPtr* /* error */, | 
 |                                         const string& in_app_version, | 
 |                                         const string& in_omaha_url, | 
 |                                         int32_t in_flags_as_int) { | 
 |   AttemptUpdateFlags flags = static_cast<AttemptUpdateFlags>(in_flags_as_int); | 
 |   bool interactive = !(flags & kAttemptUpdateFlagNonInteractive); | 
 |  | 
 |   LOG(INFO) << "Attempt update: app_version=\"" << in_app_version << "\" " | 
 |             << "omaha_url=\"" << in_omaha_url << "\" " | 
 |             << "flags=0x" << std::hex << flags << " " | 
 |             << "interactive=" << (interactive ? "yes" : "no"); | 
 |   system_state_->update_attempter()->CheckForUpdate( | 
 |       in_app_version, in_omaha_url, interactive); | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::AttemptRollback(ErrorPtr* error, bool in_powerwash) { | 
 |   LOG(INFO) << "Attempting rollback to non-active partitions."; | 
 |  | 
 |   if (!system_state_->update_attempter()->Rollback(in_powerwash)) { | 
 |     // TODO(dgarrett): Give a more specific error code/reason. | 
 |     LogAndSetError(error, FROM_HERE, "Rollback attempt failed."); | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::CanRollback(ErrorPtr* /* error */, | 
 |                                       bool* out_can_rollback) { | 
 |   bool can_rollback = system_state_->update_attempter()->CanRollback(); | 
 |   LOG(INFO) << "Checking to see if we can rollback . Result: " << can_rollback; | 
 |   *out_can_rollback = can_rollback; | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::ResetStatus(ErrorPtr* error) { | 
 |   if (!system_state_->update_attempter()->ResetStatus()) { | 
 |     // TODO(dgarrett): Give a more specific error code/reason. | 
 |     LogAndSetError(error, FROM_HERE, "ResetStatus failed."); | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetStatus(ErrorPtr* error, | 
 |                                     int64_t* out_last_checked_time, | 
 |                                     double* out_progress, | 
 |                                     string* out_current_operation, | 
 |                                     string* out_new_version, | 
 |                                     int64_t* out_new_size) { | 
 |   if (!system_state_->update_attempter()->GetStatus(out_last_checked_time, | 
 |                                                     out_progress, | 
 |                                                     out_current_operation, | 
 |                                                     out_new_version, | 
 |                                                     out_new_size)) { | 
 |     LogAndSetError(error, FROM_HERE, "GetStatus failed."); | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::RebootIfNeeded(ErrorPtr* error) { | 
 |   if (!system_state_->update_attempter()->RebootIfNeeded()) { | 
 |     // TODO(dgarrett): Give a more specific error code/reason. | 
 |     LogAndSetError(error, FROM_HERE, "Reboot not needed, or attempt failed."); | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::SetChannel(ErrorPtr* error, | 
 |                                      const string& in_target_channel, | 
 |                                      bool in_is_powerwash_allowed) { | 
 |   const policy::DevicePolicy* device_policy = system_state_->device_policy(); | 
 |  | 
 |   // The device_policy is loaded in a lazy way before an update check. Load it | 
 |   // now from the libbrillo cache if it wasn't already loaded. | 
 |   if (!device_policy) { | 
 |     UpdateAttempter* update_attempter = system_state_->update_attempter(); | 
 |     if (update_attempter) { | 
 |       update_attempter->RefreshDevicePolicy(); | 
 |       device_policy = system_state_->device_policy(); | 
 |     } | 
 |   } | 
 |  | 
 |   bool delegated = false; | 
 |   if (device_policy && device_policy->GetReleaseChannelDelegated(&delegated) && | 
 |       !delegated) { | 
 |     LogAndSetError(error, | 
 |                    FROM_HERE, | 
 |                    "Cannot set target channel explicitly when channel " | 
 |                    "policy/settings is not delegated"); | 
 |     return false; | 
 |   } | 
 |  | 
 |   LOG(INFO) << "Setting destination channel to: " << in_target_channel; | 
 |   string error_message; | 
 |   if (!system_state_->request_params()->SetTargetChannel( | 
 |           in_target_channel, in_is_powerwash_allowed, &error_message)) { | 
 |     LogAndSetError(error, FROM_HERE, error_message); | 
 |     return false; | 
 |   } | 
 |   // Update the weave state because updated the target channel. | 
 |   system_state_->update_attempter()->BroadcastChannel(); | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetChannel(ErrorPtr* /* error */, | 
 |                                      bool in_get_current_channel, | 
 |                                      string* out_channel) { | 
 |   OmahaRequestParams* rp = system_state_->request_params(); | 
 |   *out_channel = | 
 |       (in_get_current_channel ? rp->current_channel() : rp->target_channel()); | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::SetCohortHint(ErrorPtr* error, | 
 |                                         string in_cohort_hint) { | 
 |   PrefsInterface* prefs = system_state_->prefs(); | 
 |  | 
 |   // It is ok to override the cohort hint with an invalid value since it is | 
 |   // stored in stateful partition. The code reading it should sanitize it | 
 |   // anyway. | 
 |   if (!prefs->SetString(kPrefsOmahaCohortHint, in_cohort_hint)) { | 
 |     LogAndSetError( | 
 |         error, | 
 |         FROM_HERE, | 
 |         StringPrintf("Error setting the cohort hint value to \"%s\".", | 
 |                      in_cohort_hint.c_str())); | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetCohortHint(ErrorPtr* error, | 
 |                                         string* out_cohort_hint) { | 
 |   PrefsInterface* prefs = system_state_->prefs(); | 
 |  | 
 |   *out_cohort_hint = ""; | 
 |   if (prefs->Exists(kPrefsOmahaCohortHint) && | 
 |       !prefs->GetString(kPrefsOmahaCohortHint, out_cohort_hint)) { | 
 |     LogAndSetError(error, FROM_HERE, "Error getting the cohort hint."); | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::SetP2PUpdatePermission(ErrorPtr* error, | 
 |                                                  bool in_enabled) { | 
 |   PrefsInterface* prefs = system_state_->prefs(); | 
 |  | 
 |   if (!prefs->SetBoolean(kPrefsP2PEnabled, in_enabled)) { | 
 |     LogAndSetError( | 
 |         error, | 
 |         FROM_HERE, | 
 |         StringPrintf("Error setting the update via p2p permission to %s.", | 
 |                      ToString(in_enabled).c_str())); | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetP2PUpdatePermission(ErrorPtr* error, | 
 |                                                  bool* out_enabled) { | 
 |   PrefsInterface* prefs = system_state_->prefs(); | 
 |  | 
 |   bool p2p_pref = false;  // Default if no setting is present. | 
 |   if (prefs->Exists(kPrefsP2PEnabled) && | 
 |       !prefs->GetBoolean(kPrefsP2PEnabled, &p2p_pref)) { | 
 |     LogAndSetError(error, FROM_HERE, "Error getting the P2PEnabled setting."); | 
 |     return false; | 
 |   } | 
 |  | 
 |   *out_enabled = p2p_pref; | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::SetUpdateOverCellularPermission(ErrorPtr* error, | 
 |                                                           bool in_allowed) { | 
 |   set<string> allowed_types; | 
 |   const policy::DevicePolicy* device_policy = system_state_->device_policy(); | 
 |  | 
 |   // The device_policy is loaded in a lazy way before an update check. Load it | 
 |   // now from the libbrillo cache if it wasn't already loaded. | 
 |   if (!device_policy) { | 
 |     UpdateAttempter* update_attempter = system_state_->update_attempter(); | 
 |     if (update_attempter) { | 
 |       update_attempter->RefreshDevicePolicy(); | 
 |       device_policy = system_state_->device_policy(); | 
 |     } | 
 |   } | 
 |  | 
 |   // Check if this setting is allowed by the device policy. | 
 |   if (device_policy && | 
 |       device_policy->GetAllowedConnectionTypesForUpdate(&allowed_types)) { | 
 |     LogAndSetError(error, | 
 |                    FROM_HERE, | 
 |                    "Ignoring the update over cellular setting since there's " | 
 |                    "a device policy enforcing this setting."); | 
 |     return false; | 
 |   } | 
 |  | 
 |   // If the policy wasn't loaded yet, then it is still OK to change the local | 
 |   // setting because the policy will be checked again during the update check. | 
 |  | 
 |   PrefsInterface* prefs = system_state_->prefs(); | 
 |  | 
 |   if (!prefs->SetBoolean(kPrefsUpdateOverCellularPermission, in_allowed)) { | 
 |     LogAndSetError(error, | 
 |                    FROM_HERE, | 
 |                    string("Error setting the update over cellular to ") + | 
 |                        (in_allowed ? "true" : "false")); | 
 |     return false; | 
 |   } | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetUpdateOverCellularPermission(ErrorPtr* /* error */, | 
 |                                                           bool* out_allowed) { | 
 |   ConnectionManagerInterface* cm = system_state_->connection_manager(); | 
 |  | 
 |   // The device_policy is loaded in a lazy way before an update check and is | 
 |   // used to determine if an update is allowed over cellular. Load the device | 
 |   // policy now from the libbrillo cache if it wasn't already loaded. | 
 |   if (!system_state_->device_policy()) { | 
 |     UpdateAttempter* update_attempter = system_state_->update_attempter(); | 
 |     if (update_attempter) | 
 |       update_attempter->RefreshDevicePolicy(); | 
 |   } | 
 |  | 
 |   // Return the current setting based on the same logic used while checking for | 
 |   // updates. A log message could be printed as the result of this test. | 
 |   LOG(INFO) << "Checking if updates over cellular networks are allowed:"; | 
 |   *out_allowed = cm->IsUpdateAllowedOver(ConnectionType::kCellular, | 
 |                                          ConnectionTethering::kUnknown); | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetDurationSinceUpdate(ErrorPtr* error, | 
 |                                                  int64_t* out_usec_wallclock) { | 
 |   base::Time time; | 
 |   if (!system_state_->update_attempter()->GetBootTimeAtUpdate(&time)) { | 
 |     LogAndSetError(error, FROM_HERE, "No pending update."); | 
 |     return false; | 
 |   } | 
 |  | 
 |   ClockInterface* clock = system_state_->clock(); | 
 |   *out_usec_wallclock = (clock->GetBootTime() - time).InMicroseconds(); | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetPrevVersion(ErrorPtr* /* error */, | 
 |                                          string* out_prev_version) { | 
 |   *out_prev_version = system_state_->update_attempter()->GetPrevVersion(); | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetRollbackPartition( | 
 |     ErrorPtr* /* error */, string* out_rollback_partition_name) { | 
 |   BootControlInterface::Slot rollback_slot = | 
 |       system_state_->update_attempter()->GetRollbackSlot(); | 
 |  | 
 |   if (rollback_slot == BootControlInterface::kInvalidSlot) { | 
 |     out_rollback_partition_name->clear(); | 
 |     return true; | 
 |   } | 
 |  | 
 |   string name; | 
 |   if (!system_state_->boot_control()->GetPartitionDevice( | 
 |           "KERNEL", rollback_slot, &name)) { | 
 |     LOG(ERROR) << "Invalid rollback device"; | 
 |     return false; | 
 |   } | 
 |  | 
 |   LOG(INFO) << "Getting rollback partition name. Result: " << name; | 
 |   *out_rollback_partition_name = name; | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetLastAttemptError(ErrorPtr* /* error */, | 
 |                                               int32_t* out_last_attempt_error) { | 
 |   ErrorCode error_code = system_state_->payload_state()->GetAttemptErrorCode(); | 
 |   *out_last_attempt_error = static_cast<int>(error_code); | 
 |   return true; | 
 | } | 
 |  | 
 | bool UpdateEngineService::GetEolStatus(ErrorPtr* error, | 
 |                                        int32_t* out_eol_status) { | 
 |   PrefsInterface* prefs = system_state_->prefs(); | 
 |  | 
 |   string str_eol_status; | 
 |   if (prefs->Exists(kPrefsOmahaEolStatus) && | 
 |       !prefs->GetString(kPrefsOmahaEolStatus, &str_eol_status)) { | 
 |     LogAndSetError(error, FROM_HERE, "Error getting the end-of-life status."); | 
 |     return false; | 
 |   } | 
 |  | 
 |   // StringToEolStatus will return kSupported for invalid values. | 
 |   *out_eol_status = static_cast<int32_t>(StringToEolStatus(str_eol_status)); | 
 |   return true; | 
 | } | 
 |  | 
 | }  // namespace chromeos_update_engine |