|  | // | 
|  | // Copyright (C) 2012 The Android Open Source Project | 
|  | // | 
|  | // Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | // you may not use this file except in compliance with the License. | 
|  | // You may obtain a copy of the License at | 
|  | // | 
|  | //      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | // | 
|  | // Unless required by applicable law or agreed to in writing, software | 
|  | // distributed under the License is distributed on an "AS IS" BASIS, | 
|  | // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | // See the License for the specific language governing permissions and | 
|  | // limitations under the License. | 
|  | // | 
|  |  | 
|  | #include "update_engine/payload_generator/cycle_breaker.h" | 
|  |  | 
|  | #include <inttypes.h> | 
|  |  | 
|  | #include <limits> | 
|  | #include <set> | 
|  | #include <string> | 
|  | #include <utility> | 
|  |  | 
|  | #include <base/stl_util.h> | 
|  | #include <base/strings/string_util.h> | 
|  | #include <base/strings/stringprintf.h> | 
|  |  | 
|  | #include "update_engine/payload_generator/graph_utils.h" | 
|  | #include "update_engine/payload_generator/tarjan.h" | 
|  |  | 
|  | using std::make_pair; | 
|  | using std::set; | 
|  | using std::vector; | 
|  |  | 
|  | namespace chromeos_update_engine { | 
|  |  | 
|  | // This is the outer function from the original paper. | 
|  | void CycleBreaker::BreakCycles(const Graph& graph, set<Edge>* out_cut_edges) { | 
|  | cut_edges_.clear(); | 
|  |  | 
|  | // Make a copy, which we will modify by removing edges. Thus, in each | 
|  | // iteration subgraph_ is the current subgraph or the original with | 
|  | // vertices we desire. This variable was "A_K" in the original paper. | 
|  | subgraph_ = graph; | 
|  |  | 
|  | // The paper calls for the "adjacency structure (i.e., graph) of | 
|  | // strong (-ly connected) component K with least vertex in subgraph | 
|  | // induced by {s, s + 1, ..., n}". | 
|  | // We arbitrarily order each vertex by its index in the graph. Thus, | 
|  | // each iteration, we are looking at the subgraph {s, s + 1, ..., n} | 
|  | // and looking for the strongly connected component with vertex s. | 
|  |  | 
|  | TarjanAlgorithm tarjan; | 
|  | skipped_ops_ = 0; | 
|  |  | 
|  | for (Graph::size_type i = 0; i < subgraph_.size(); i++) { | 
|  | InstallOperation_Type op_type = graph[i].aop.op.type(); | 
|  | if (op_type == InstallOperation::REPLACE || | 
|  | op_type == InstallOperation::REPLACE_BZ) { | 
|  | skipped_ops_++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (i > 0) { | 
|  | // Erase node (i - 1) from subgraph_. First, erase what it points to | 
|  | subgraph_[i - 1].out_edges.clear(); | 
|  | // Now, erase any pointers to node (i - 1) | 
|  | for (Graph::size_type j = i; j < subgraph_.size(); j++) { | 
|  | subgraph_[j].out_edges.erase(i - 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | // Calculate SCC (strongly connected component) with vertex i. | 
|  | vector<Vertex::Index> component_indexes; | 
|  | tarjan.Execute(i, &subgraph_, &component_indexes); | 
|  |  | 
|  | // Set subgraph edges for the components in the SCC. | 
|  | for (vector<Vertex::Index>::iterator it = component_indexes.begin(); | 
|  | it != component_indexes.end(); ++it) { | 
|  | subgraph_[*it].subgraph_edges.clear(); | 
|  | for (vector<Vertex::Index>::iterator jt = component_indexes.begin(); | 
|  | jt != component_indexes.end(); ++jt) { | 
|  | // If there's a link from *it -> *jt in the graph, | 
|  | // add a subgraph_ edge | 
|  | if (base::ContainsKey(subgraph_[*it].out_edges, *jt)) | 
|  | subgraph_[*it].subgraph_edges.insert(*jt); | 
|  | } | 
|  | } | 
|  |  | 
|  | current_vertex_ = i; | 
|  | blocked_.clear(); | 
|  | blocked_.resize(subgraph_.size()); | 
|  | blocked_graph_.clear(); | 
|  | blocked_graph_.resize(subgraph_.size()); | 
|  | Circuit(current_vertex_, 0); | 
|  | } | 
|  |  | 
|  | out_cut_edges->swap(cut_edges_); | 
|  | LOG(INFO) << "Cycle breaker skipped " << skipped_ops_ << " ops."; | 
|  | DCHECK(stack_.empty()); | 
|  | } | 
|  |  | 
|  | static const size_t kMaxEdgesToConsider = 2; | 
|  |  | 
|  | void CycleBreaker::HandleCircuit() { | 
|  | stack_.push_back(current_vertex_); | 
|  | CHECK_GE(stack_.size(), | 
|  | static_cast<vector<Vertex::Index>::size_type>(2)); | 
|  | Edge min_edge = make_pair(stack_[0], stack_[1]); | 
|  | uint64_t min_edge_weight = std::numeric_limits<uint64_t>::max(); | 
|  | size_t edges_considered = 0; | 
|  | for (vector<Vertex::Index>::const_iterator it = stack_.begin(); | 
|  | it != (stack_.end() - 1); ++it) { | 
|  | Edge edge = make_pair(*it, *(it + 1)); | 
|  | if (cut_edges_.find(edge) != cut_edges_.end()) { | 
|  | stack_.pop_back(); | 
|  | return; | 
|  | } | 
|  | uint64_t edge_weight = graph_utils::EdgeWeight(subgraph_, edge); | 
|  | if (edge_weight < min_edge_weight) { | 
|  | min_edge_weight = edge_weight; | 
|  | min_edge = edge; | 
|  | } | 
|  | edges_considered++; | 
|  | if (edges_considered == kMaxEdgesToConsider) | 
|  | break; | 
|  | } | 
|  | cut_edges_.insert(min_edge); | 
|  | stack_.pop_back(); | 
|  | } | 
|  |  | 
|  | void CycleBreaker::Unblock(Vertex::Index u) { | 
|  | blocked_[u] = false; | 
|  |  | 
|  | for (Vertex::EdgeMap::iterator it = blocked_graph_[u].out_edges.begin(); | 
|  | it != blocked_graph_[u].out_edges.end(); ) { | 
|  | Vertex::Index w = it->first; | 
|  | blocked_graph_[u].out_edges.erase(it++); | 
|  | if (blocked_[w]) | 
|  | Unblock(w); | 
|  | } | 
|  | } | 
|  |  | 
|  | bool CycleBreaker::StackContainsCutEdge() const { | 
|  | for (vector<Vertex::Index>::const_iterator it = ++stack_.begin(), | 
|  | e = stack_.end(); it != e; ++it) { | 
|  | Edge edge = make_pair(*(it - 1), *it); | 
|  | if (base::ContainsKey(cut_edges_, edge)) { | 
|  | return true; | 
|  | } | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool CycleBreaker::Circuit(Vertex::Index vertex, Vertex::Index depth) { | 
|  | // "vertex" was "v" in the original paper. | 
|  | bool found = false;  // Was "f" in the original paper. | 
|  | stack_.push_back(vertex); | 
|  | blocked_[vertex] = true; | 
|  | { | 
|  | static int counter = 0; | 
|  | counter++; | 
|  | if (counter == 10000) { | 
|  | counter = 0; | 
|  | std::string stack_str; | 
|  | for (Vertex::Index index : stack_) { | 
|  | stack_str += std::to_string(index); | 
|  | stack_str += " -> "; | 
|  | } | 
|  | LOG(INFO) << "stack: " << stack_str; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (Vertex::SubgraphEdgeMap::iterator w = | 
|  | subgraph_[vertex].subgraph_edges.begin(); | 
|  | w != subgraph_[vertex].subgraph_edges.end(); ++w) { | 
|  | if (*w == current_vertex_) { | 
|  | // The original paper called for printing stack_ followed by | 
|  | // current_vertex_ here, which is a cycle. Instead, we call | 
|  | // HandleCircuit() to break it. | 
|  | HandleCircuit(); | 
|  | found = true; | 
|  | } else if (!blocked_[*w]) { | 
|  | if (Circuit(*w, depth + 1)) { | 
|  | found = true; | 
|  | if ((depth > kMaxEdgesToConsider) || StackContainsCutEdge()) | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (found) { | 
|  | Unblock(vertex); | 
|  | } else { | 
|  | for (Vertex::SubgraphEdgeMap::iterator w = | 
|  | subgraph_[vertex].subgraph_edges.begin(); | 
|  | w != subgraph_[vertex].subgraph_edges.end(); ++w) { | 
|  | if (blocked_graph_[*w].out_edges.find(vertex) == | 
|  | blocked_graph_[*w].out_edges.end()) { | 
|  | blocked_graph_[*w].out_edges.insert(make_pair(vertex, | 
|  | EdgeProperties())); | 
|  | } | 
|  | } | 
|  | } | 
|  | CHECK_EQ(vertex, stack_.back()); | 
|  | stack_.pop_back(); | 
|  | return found; | 
|  | } | 
|  |  | 
|  | }  // namespace chromeos_update_engine |