keystore2/src/enforcements.rs - android_system_security - Gitiles

 // Copyright 2020, The Android Open Source Project
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //     http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.

 //TODO: remove this after implementing the methods.
 #![allow(dead_code)]

 //! This is the Keystore 2.0 Enforcements module.
 // TODO: more description to follow.
 use crate::auth_token_handler::AuthTokenHandler;
 use crate::database::AuthTokenEntry;
 use crate::error::Error as KeystoreError;
 use crate::globals::DB;
 use crate::key_parameter::{KeyParameter, KeyParameterValue};
 use android_hardware_security_keymint::aidl::android::hardware::security::keymint::{
     Algorithm::Algorithm, ErrorCode::ErrorCode as Ec, HardwareAuthToken::HardwareAuthToken,
     HardwareAuthenticatorType::HardwareAuthenticatorType, KeyPurpose::KeyPurpose,
     SecurityLevel::SecurityLevel, Tag::Tag, Timestamp::Timestamp,
 };
 use android_system_keystore2::aidl::android::system::keystore2::OperationChallenge::OperationChallenge;
 use anyhow::{Context, Result};
 use std::collections::{HashMap, HashSet};
 use std::sync::Mutex;
 use std::time::SystemTime;

 /// Enforcements data structure
 pub struct Enforcements {
     // This hash set contains the user ids for whom the device is currently unlocked. If a user id
     // is not in the set, it implies that the device is locked for the user.
     device_unlocked_set: Mutex<HashSet<i32>>,
     // This maps the operation challenge to an optional auth token, to maintain op-auth tokens
     // in-memory, until they are picked up and given to the operation by authorise_update_finish().
     op_auth_map: Mutex<HashMap<i64, Option<HardwareAuthToken>>>,
 }

 impl Enforcements {
     /// Creates an enforcement object with the two data structures it holds.
     pub fn new() -> Self {
         Enforcements {
             device_unlocked_set: Mutex::new(HashSet::new()),
             op_auth_map: Mutex::new(HashMap::new()),
         }
     }

     /// Checks if update or finish calls are authorized. If the operation is based on per-op key,
     /// try to receive the auth token from the op_auth_map. We assume that by the time update/finish
     /// is called, the auth token has been delivered to keystore. Therefore, we do not wait for it
     /// and if the auth token is not found in the map, an error is returned.
     pub fn authorize_update_or_finish(
         &self,
         key_params: &[KeyParameter],
         op_challenge: Option<OperationChallenge>,
     ) -> Result<AuthTokenHandler> {
         let mut user_auth_type: Option<HardwareAuthenticatorType> = None;
         let mut user_secure_ids = Vec::<i64>::new();
         let mut is_timeout_key = false;

         for key_param in key_params.iter() {
             match key_param.key_parameter_value() {
                 KeyParameterValue::NoAuthRequired => {
                     // unlike in authorize_create, we do not check if both NoAuthRequired and user
                     // secure id are present, because that is already checked in authorize_create.
                     return Ok(AuthTokenHandler::NoAuthRequired);
                 }
                 KeyParameterValue::AuthTimeout(_) => {
                     is_timeout_key = true;
                 }
                 KeyParameterValue::HardwareAuthenticatorType(a) => {
                     user_auth_type = Some(*a);
                 }
                 KeyParameterValue::UserSecureID(u) => {
                     user_secure_ids.push(*u);
                 }
                 _ => {}
             }
         }

         // If either of auth_type or secure_id is present and the other is not present,
         // authorize_create would have already returned error.
         // At this point, if UserSecureID is present and AuthTimeout is not present in
         // key parameters, per-op auth is required.
         // Obtain and validate the auth token.
         if !is_timeout_key && !user_secure_ids.is_empty() {
             let challenge =
                 op_challenge.ok_or(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED)).context(
                     "In authorize_update_or_finish: Auth required, but operation challenge is not
                     present.",
                 )?;
             let auth_type =
                 user_auth_type.ok_or(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED)).context(
                     "In authorize_update_or_finish: Auth required, but authenticator type is not
                     present.",
                 )?;
             // It is ok to unwrap here, because there is no way this lock can get poisoned and
             // and there is no way to recover if it is poisoned.
             let mut op_auth_map_guard = self.op_auth_map.lock().unwrap();
             let auth_entry = op_auth_map_guard.remove(&(challenge.challenge));

             match auth_entry {
                 Some(Some(auth_token)) => {
                     if AuthTokenEntry::satisfies_auth(&auth_token, &user_secure_ids, auth_type) {
                         return Ok(AuthTokenHandler::Token(auth_token, None));
                     } else {
                         return Err(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED))
                             .context("In authorize_update_or_finish: Auth token does not match.");
                     }
                 }
                 _ => {
                     // there was no auth token
                     return Err(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED)).context(
                         "In authorize_update_or_finish: Auth required, but an auth token
                         is not found for the given operation challenge, in the op_auth_map.",
                     );
                 }
             }
         }

         // If we don't find HardwareAuthenticatorType and UserSecureID, we assume that
         // authentication is not required, because in legacy keys, authentication related
         // key parameters may not present.
         // TODO: METRICS: count how many times (if any) this code path is executed, in order
         // to identify if any such keys are in use
         Ok(AuthTokenHandler::NoAuthRequired)
     }

     /// Checks if a create call is authorized, given key parameters and operation parameters.
     /// With regard to auth tokens, the following steps are taken:
     /// If the key is time-bound, find a matching auth token from the database.
     /// If the above step is successful, and if the security level is STRONGBOX, return a
     /// VerificationRequired variant of the AuthTokenHandler with the found auth token to signal
     /// the operation that it may need to obtain a verification token from TEE KeyMint.
     /// If the security level is not STRONGBOX, return a Token variant of the AuthTokenHandler with
     /// the found auth token to signal the operation that no more authorization required.
     /// If the key is per-op, return an OpAuthRequired variant of the AuthTokenHandler to signal
     /// create_operation() that it needs to add the operation challenge to the op_auth_map, once it
     /// is received from the keymint, and that operation needs to be authorized before update/finish
     /// is called.
     pub fn authorize_create(
         &self,
         purpose: KeyPurpose,
         key_params: &[KeyParameter],
         op_params: &[KeyParameter],
         // security_level will be used in the next CL
         _security_level: SecurityLevel,
     ) -> Result<AuthTokenHandler> {
         match purpose {
             // Allow SIGN, DECRYPT for both symmetric and asymmetric keys.
             KeyPurpose::SIGN | KeyPurpose::DECRYPT => {}
             // Rule out WRAP_KEY purpose
             KeyPurpose::WRAP_KEY => {
                 return Err(KeystoreError::Km(Ec::INCOMPATIBLE_PURPOSE))
                     .context("In authorize_create: WRAP_KEY purpose is not allowed here.");
             }
             KeyPurpose::VERIFY | KeyPurpose::ENCRYPT => {
                 // We do not support ENCRYPT and VERIFY (the remaining two options of purpose) for
                 // asymmetric keys.
                 for kp in key_params.iter() {
                     match *kp.key_parameter_value() {
                         KeyParameterValue::Algorithm(Algorithm::RSA)
                         | KeyParameterValue::Algorithm(Algorithm::EC) => {
                             return Err(KeystoreError::Km(Ec::UNSUPPORTED_PURPOSE)).context(
                                 "In authorize_create: public operations on asymmetric keys are not
                                  supported.",
                             );
                         }
                         _ => {}
                     }
                 }
             }
             _ => {
                 return Err(KeystoreError::Km(Ec::UNSUPPORTED_PURPOSE))
                     .context("In authorize_create: specified purpose is not supported.");
             }
         }
         // The following variables are to record information from key parameters to be used in
         // enforcements, when two or more such pieces of information are required for enforcements.
         // There is only one additional variable than what legacy keystore has, but this helps
         // reduce the number of for loops on key parameters from 3 to 1, compared to legacy keystore
         let mut key_purpose_authorized: bool = false;
         let mut is_time_out_key: bool = false;
         let mut auth_type: Option<HardwareAuthenticatorType> = None;
         let mut no_auth_required: bool = false;
         let mut caller_nonce_allowed = false;
         let mut user_id: i32 = -1;
         let mut user_secure_ids = Vec::<i64>::new();

         // iterate through key parameters, recording information we need for authorization
         // enforcements later, or enforcing authorizations in place, where applicable
         for key_param in key_params.iter() {
             match key_param.key_parameter_value() {
                 KeyParameterValue::NoAuthRequired => {
                     no_auth_required = true;
                 }
                 KeyParameterValue::AuthTimeout(_) => {
                     is_time_out_key = true;
                 }
                 KeyParameterValue::HardwareAuthenticatorType(a) => {
                     auth_type = Some(*a);
                 }
                 KeyParameterValue::KeyPurpose(p) => {
                     // Note: if there can be multiple KeyPurpose key parameters (TODO: confirm this),
                     // following check has the effect of key_params.contains(purpose)
                     // Also, authorizing purpose can not be completed here, if there can be multiple
                     // key parameters for KeyPurpose
                     if !key_purpose_authorized && *p == purpose {
                         key_purpose_authorized = true;
                     }
                 }
                 KeyParameterValue::CallerNonce => {
                     caller_nonce_allowed = true;
                 }
                 KeyParameterValue::ActiveDateTime(a) => {
                     if !Enforcements::is_given_time_passed(*a, true) {
                         return Err(KeystoreError::Km(Ec::KEY_NOT_YET_VALID))
                             .context("In authorize_create: key is not yet active.");
                     }
                 }
                 KeyParameterValue::OriginationExpireDateTime(o) => {
                     if (purpose == KeyPurpose::ENCRYPT || purpose == KeyPurpose::SIGN)
                         && Enforcements::is_given_time_passed(*o, false)
                     {
                         return Err(KeystoreError::Km(Ec::KEY_EXPIRED))
                             .context("In authorize_create: key is expired.");
                     }
                 }
                 KeyParameterValue::UsageExpireDateTime(u) => {
                     if (purpose == KeyPurpose::DECRYPT || purpose == KeyPurpose::VERIFY)
                         && Enforcements::is_given_time_passed(*u, false)
                     {
                         return Err(KeystoreError::Km(Ec::KEY_EXPIRED))
                             .context("In authorize_create: key is expired.");
                     }
                 }
                 KeyParameterValue::UserSecureID(s) => {
                     user_secure_ids.push(*s);
                 }
                 KeyParameterValue::UserID(u) => {
                     user_id = *u;
                 }
                 KeyParameterValue::UnlockedDeviceRequired => {
                     // check the device locked status. If locked, operations on the key are not
                     // allowed.
                     if self.is_device_locked(user_id) {
                         return Err(KeystoreError::Km(Ec::DEVICE_LOCKED))
                             .context("In authorize_create: device is locked.");
                     }
                 }
                 // NOTE: as per offline discussion, sanitizing key parameters and rejecting
                 // create operation if any non-allowed tags are present, is not done in
                 // authorize_create (unlike in legacy keystore where AuthorizeBegin is rejected if
                 // a subset of non-allowed tags are present). Because santizing key parameters
                 // should have been done during generate/import key, by KeyMint.
                 _ => { /*Do nothing on all the other key parameters, as in legacy keystore*/ }
             }
         }

         // authorize the purpose
         if !key_purpose_authorized {
             return Err(KeystoreError::Km(Ec::INCOMPATIBLE_PURPOSE))
                 .context("In authorize_create: the purpose is not authorized.");
         }

         // if both NO_AUTH_REQUIRED and USER_SECURE_ID tags are present, return error
         if !user_secure_ids.is_empty() && no_auth_required {
             return Err(KeystoreError::Km(Ec::INVALID_KEY_BLOB)).context(
                 "In authorize_create: key has both NO_AUTH_REQUIRED
                 and USER_SECURE_ID tags.",
             );
         }

         // if either of auth_type or secure_id is present and the other is not present, return error
         if (auth_type.is_some() && user_secure_ids.is_empty())
             || (auth_type.is_none() && !user_secure_ids.is_empty())
         {
             return Err(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED)).context(
                 "In authorize_create: Auth required, but either auth type or secure ids
                 are not present.",
             );
         }
         // validate caller nonce for origination purposes
         if (purpose == KeyPurpose::ENCRYPT || purpose == KeyPurpose::SIGN)
             && !caller_nonce_allowed
             && op_params.iter().any(|kp| kp.get_tag() == Tag::NONCE)
         {
             return Err(KeystoreError::Km(Ec::CALLER_NONCE_PROHIBITED)).context(
                 "In authorize_create, NONCE is present,
                     although CALLER_NONCE is not present",
             );
         }

         if !user_secure_ids.is_empty() {
             // per op auth token
             if !is_time_out_key {
                 return Ok(AuthTokenHandler::OpAuthRequired);
             } else {
                 //time out token
                 // TODO: retrieve it from the database
                 // - in an upcoming CL
             }
         }

         // If we reach here, all authorization enforcements have passed and no auth token required.
         Ok(AuthTokenHandler::NoAuthRequired)
     }

     /// Checks if the time now since epoch is greater than (or equal, if is_given_time_inclusive is
     /// set) the given time (in milliseconds)
     fn is_given_time_passed(given_time: i64, is_given_time_inclusive: bool) -> bool {
         let duration_since_epoch = SystemTime::now().duration_since(SystemTime::UNIX_EPOCH);

         let time_since_epoch = match duration_since_epoch {
             Ok(duration) => duration.as_millis(),
             Err(_) => return false,
         };

         if is_given_time_inclusive {
             time_since_epoch >= (given_time as u128)
         } else {
             time_since_epoch > (given_time as u128)
         }
     }

     /// Check if the device is locked for the given user. If there's no entry yet for the user,
     /// we assume that the device is locked
     fn is_device_locked(&self, user_id: i32) -> bool {
         // unwrap here because there's no way this mutex guard can be poisoned and
         // because there's no way to recover, even if it is poisoned.
         let set = self.device_unlocked_set.lock().unwrap();
         !set.contains(&user_id)
     }

     /// Sets the device locked status for the user. This method is called externally.
     pub fn set_device_locked(&self, user_id: i32, device_locked_status: bool) {
         // unwrap here because there's no way this mutex guard can be poisoned and
         // because there's no way to recover, even if it is poisoned.
         let mut set = self.device_unlocked_set.lock().unwrap();
         if device_locked_status {
             set.remove(&user_id);
         } else {
             set.insert(user_id);
         }
     }

     /// Add this auth token to the database.
     /// Then check if there is an entry in the op_auth_map, indexed by the challenge of this
     /// auth token (which could have been inserted during create_operation of an operation on a
     /// per-op-auth key). If so, add a copy of this auth token to the map indexed by the
     /// challenge.
     pub fn add_auth_token(&self, auth_token: HardwareAuthToken) -> Result<()> {
         //it is ok to unwrap here, because there is no way this lock can get poisoned and
         //and there is no way to recover if it is poisoned.
         let mut op_auth_map_guard = self.op_auth_map.lock().unwrap();

         if op_auth_map_guard.contains_key(&auth_token.challenge) {
             let auth_token_copy = HardwareAuthToken {
                 challenge: auth_token.challenge,
                 userId: auth_token.userId,
                 authenticatorId: auth_token.authenticatorId,
                 authenticatorType: HardwareAuthenticatorType(auth_token.authenticatorType.0),
                 timestamp: Timestamp { milliSeconds: auth_token.timestamp.milliSeconds },
                 mac: auth_token.mac.clone(),
             };
             op_auth_map_guard.insert(auth_token.challenge, Some(auth_token_copy));
         }

         DB.with(|db| db.borrow_mut().insert_auth_token(&auth_token))
             .context("In add_auth_token.")?;
         Ok(())
     }
 }

 impl Default for Enforcements {
     fn default() -> Self {
         Self::new()
     }
 }

 // TODO: Add tests to enforcement module (b/175578618).
	// Copyright 2020, The Android Open Source Project
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.

	//TODO: remove this after implementing the methods.
	#![allow(dead_code)]

	//! This is the Keystore 2.0 Enforcements module.
	// TODO: more description to follow.
	use crate::auth_token_handler::AuthTokenHandler;
	use crate::database::AuthTokenEntry;
	use crate::error::Error as KeystoreError;
	use crate::globals::DB;
	use crate::key_parameter::{KeyParameter, KeyParameterValue};
	use android_hardware_security_keymint::aidl::android::hardware::security::keymint::{
	Algorithm::Algorithm, ErrorCode::ErrorCode as Ec, HardwareAuthToken::HardwareAuthToken,
	HardwareAuthenticatorType::HardwareAuthenticatorType, KeyPurpose::KeyPurpose,
	SecurityLevel::SecurityLevel, Tag::Tag, Timestamp::Timestamp,
	};
	use android_system_keystore2::aidl::android::system::keystore2::OperationChallenge::OperationChallenge;
	use anyhow::{Context, Result};
	use std::collections::{HashMap, HashSet};
	use std::sync::Mutex;
	use std::time::SystemTime;

	/// Enforcements data structure
	pub struct Enforcements {
	// This hash set contains the user ids for whom the device is currently unlocked. If a user id
	// is not in the set, it implies that the device is locked for the user.
	device_unlocked_set: Mutex<HashSet<i32>>,
	// This maps the operation challenge to an optional auth token, to maintain op-auth tokens
	// in-memory, until they are picked up and given to the operation by authorise_update_finish().
	op_auth_map: Mutex<HashMap<i64, Option<HardwareAuthToken>>>,
	}

	impl Enforcements {
	/// Creates an enforcement object with the two data structures it holds.
	pub fn new() -> Self {
	Enforcements {
	device_unlocked_set: Mutex::new(HashSet::new()),
	op_auth_map: Mutex::new(HashMap::new()),
	}
	}

	/// Checks if update or finish calls are authorized. If the operation is based on per-op key,
	/// try to receive the auth token from the op_auth_map. We assume that by the time update/finish
	/// is called, the auth token has been delivered to keystore. Therefore, we do not wait for it
	/// and if the auth token is not found in the map, an error is returned.
	pub fn authorize_update_or_finish(
	&self,
	key_params: &[KeyParameter],
	op_challenge: Option<OperationChallenge>,
	) -> Result<AuthTokenHandler> {
	let mut user_auth_type: Option<HardwareAuthenticatorType> = None;
	let mut user_secure_ids = Vec::<i64>::new();
	let mut is_timeout_key = false;

	for key_param in key_params.iter() {
	match key_param.key_parameter_value() {
	KeyParameterValue::NoAuthRequired => {
	// unlike in authorize_create, we do not check if both NoAuthRequired and user
	// secure id are present, because that is already checked in authorize_create.
	return Ok(AuthTokenHandler::NoAuthRequired);
	}
	KeyParameterValue::AuthTimeout(_) => {
	is_timeout_key = true;
	}
	KeyParameterValue::HardwareAuthenticatorType(a) => {
	user_auth_type = Some(*a);
	}
	KeyParameterValue::UserSecureID(u) => {
	user_secure_ids.push(*u);
	}
	_ => {}
	}
	}

	// If either of auth_type or secure_id is present and the other is not present,
	// authorize_create would have already returned error.
	// At this point, if UserSecureID is present and AuthTimeout is not present in
	// key parameters, per-op auth is required.
	// Obtain and validate the auth token.
	if !is_timeout_key && !user_secure_ids.is_empty() {
	let challenge =
	op_challenge.ok_or(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED)).context(
	"In authorize_update_or_finish: Auth required, but operation challenge is not
	present.",
	)?;
	let auth_type =
	user_auth_type.ok_or(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED)).context(
	"In authorize_update_or_finish: Auth required, but authenticator type is not
	present.",
	)?;
	// It is ok to unwrap here, because there is no way this lock can get poisoned and
	// and there is no way to recover if it is poisoned.
	let mut op_auth_map_guard = self.op_auth_map.lock().unwrap();
	let auth_entry = op_auth_map_guard.remove(&(challenge.challenge));

	match auth_entry {
	Some(Some(auth_token)) => {
	if AuthTokenEntry::satisfies_auth(&auth_token, &user_secure_ids, auth_type) {
	return Ok(AuthTokenHandler::Token(auth_token, None));
	} else {
	return Err(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED))
	.context("In authorize_update_or_finish: Auth token does not match.");
	}
	}
	_ => {
	// there was no auth token
	return Err(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED)).context(
	"In authorize_update_or_finish: Auth required, but an auth token
	is not found for the given operation challenge, in the op_auth_map.",
	);
	}
	}
	}

	// If we don't find HardwareAuthenticatorType and UserSecureID, we assume that
	// authentication is not required, because in legacy keys, authentication related
	// key parameters may not present.
	// TODO: METRICS: count how many times (if any) this code path is executed, in order
	// to identify if any such keys are in use
	Ok(AuthTokenHandler::NoAuthRequired)
	}

	/// Checks if a create call is authorized, given key parameters and operation parameters.
	/// With regard to auth tokens, the following steps are taken:
	/// If the key is time-bound, find a matching auth token from the database.
	/// If the above step is successful, and if the security level is STRONGBOX, return a
	/// VerificationRequired variant of the AuthTokenHandler with the found auth token to signal
	/// the operation that it may need to obtain a verification token from TEE KeyMint.
	/// If the security level is not STRONGBOX, return a Token variant of the AuthTokenHandler with
	/// the found auth token to signal the operation that no more authorization required.
	/// If the key is per-op, return an OpAuthRequired variant of the AuthTokenHandler to signal
	/// create_operation() that it needs to add the operation challenge to the op_auth_map, once it
	/// is received from the keymint, and that operation needs to be authorized before update/finish
	/// is called.
	pub fn authorize_create(
	&self,
	purpose: KeyPurpose,
	key_params: &[KeyParameter],
	op_params: &[KeyParameter],
	// security_level will be used in the next CL
	_security_level: SecurityLevel,
	) -> Result<AuthTokenHandler> {
	match purpose {
	// Allow SIGN, DECRYPT for both symmetric and asymmetric keys.
	KeyPurpose::SIGN \| KeyPurpose::DECRYPT => {}
	// Rule out WRAP_KEY purpose
	KeyPurpose::WRAP_KEY => {
	return Err(KeystoreError::Km(Ec::INCOMPATIBLE_PURPOSE))
	.context("In authorize_create: WRAP_KEY purpose is not allowed here.");
	}
	KeyPurpose::VERIFY \| KeyPurpose::ENCRYPT => {
	// We do not support ENCRYPT and VERIFY (the remaining two options of purpose) for
	// asymmetric keys.
	for kp in key_params.iter() {
	match *kp.key_parameter_value() {
	KeyParameterValue::Algorithm(Algorithm::RSA)
	\| KeyParameterValue::Algorithm(Algorithm::EC) => {
	return Err(KeystoreError::Km(Ec::UNSUPPORTED_PURPOSE)).context(
	"In authorize_create: public operations on asymmetric keys are not
	supported.",
	);
	}
	_ => {}
	}
	}
	}
	_ => {
	return Err(KeystoreError::Km(Ec::UNSUPPORTED_PURPOSE))
	.context("In authorize_create: specified purpose is not supported.");
	}
	}
	// The following variables are to record information from key parameters to be used in
	// enforcements, when two or more such pieces of information are required for enforcements.
	// There is only one additional variable than what legacy keystore has, but this helps
	// reduce the number of for loops on key parameters from 3 to 1, compared to legacy keystore
	let mut key_purpose_authorized: bool = false;
	let mut is_time_out_key: bool = false;
	let mut auth_type: Option<HardwareAuthenticatorType> = None;
	let mut no_auth_required: bool = false;
	let mut caller_nonce_allowed = false;
	let mut user_id: i32 = -1;
	let mut user_secure_ids = Vec::<i64>::new();

	// iterate through key parameters, recording information we need for authorization
	// enforcements later, or enforcing authorizations in place, where applicable
	for key_param in key_params.iter() {
	match key_param.key_parameter_value() {
	KeyParameterValue::NoAuthRequired => {
	no_auth_required = true;
	}
	KeyParameterValue::AuthTimeout(_) => {
	is_time_out_key = true;
	}
	KeyParameterValue::HardwareAuthenticatorType(a) => {
	auth_type = Some(*a);
	}
	KeyParameterValue::KeyPurpose(p) => {
	// Note: if there can be multiple KeyPurpose key parameters (TODO: confirm this),
	// following check has the effect of key_params.contains(purpose)
	// Also, authorizing purpose can not be completed here, if there can be multiple
	// key parameters for KeyPurpose
	if !key_purpose_authorized && *p == purpose {
	key_purpose_authorized = true;
	}
	}
	KeyParameterValue::CallerNonce => {
	caller_nonce_allowed = true;
	}
	KeyParameterValue::ActiveDateTime(a) => {
	if !Enforcements::is_given_time_passed(*a, true) {
	return Err(KeystoreError::Km(Ec::KEY_NOT_YET_VALID))
	.context("In authorize_create: key is not yet active.");
	}
	}
	KeyParameterValue::OriginationExpireDateTime(o) => {
	if (purpose == KeyPurpose::ENCRYPT \|\| purpose == KeyPurpose::SIGN)
	&& Enforcements::is_given_time_passed(*o, false)
	{
	return Err(KeystoreError::Km(Ec::KEY_EXPIRED))
	.context("In authorize_create: key is expired.");
	}
	}
	KeyParameterValue::UsageExpireDateTime(u) => {
	if (purpose == KeyPurpose::DECRYPT \|\| purpose == KeyPurpose::VERIFY)
	&& Enforcements::is_given_time_passed(*u, false)
	{
	return Err(KeystoreError::Km(Ec::KEY_EXPIRED))
	.context("In authorize_create: key is expired.");
	}
	}
	KeyParameterValue::UserSecureID(s) => {
	user_secure_ids.push(*s);
	}
	KeyParameterValue::UserID(u) => {
	user_id = *u;
	}
	KeyParameterValue::UnlockedDeviceRequired => {
	// check the device locked status. If locked, operations on the key are not
	// allowed.
	if self.is_device_locked(user_id) {
	return Err(KeystoreError::Km(Ec::DEVICE_LOCKED))
	.context("In authorize_create: device is locked.");
	}
	}
	// NOTE: as per offline discussion, sanitizing key parameters and rejecting
	// create operation if any non-allowed tags are present, is not done in
	// authorize_create (unlike in legacy keystore where AuthorizeBegin is rejected if
	// a subset of non-allowed tags are present). Because santizing key parameters
	// should have been done during generate/import key, by KeyMint.
	_ => { /Do nothing on all the other key parameters, as in legacy keystore/ }
	}
	}

	// authorize the purpose
	if !key_purpose_authorized {
	return Err(KeystoreError::Km(Ec::INCOMPATIBLE_PURPOSE))
	.context("In authorize_create: the purpose is not authorized.");
	}

	// if both NO_AUTH_REQUIRED and USER_SECURE_ID tags are present, return error
	if !user_secure_ids.is_empty() && no_auth_required {
	return Err(KeystoreError::Km(Ec::INVALID_KEY_BLOB)).context(
	"In authorize_create: key has both NO_AUTH_REQUIRED
	and USER_SECURE_ID tags.",
	);
	}

	// if either of auth_type or secure_id is present and the other is not present, return error
	if (auth_type.is_some() && user_secure_ids.is_empty())
	\|\| (auth_type.is_none() && !user_secure_ids.is_empty())
	{
	return Err(KeystoreError::Km(Ec::KEY_USER_NOT_AUTHENTICATED)).context(
	"In authorize_create: Auth required, but either auth type or secure ids
	are not present.",
	);
	}
	// validate caller nonce for origination purposes
	if (purpose == KeyPurpose::ENCRYPT \|\| purpose == KeyPurpose::SIGN)
	&& !caller_nonce_allowed
	&& op_params.iter().any(\|kp\| kp.get_tag() == Tag::NONCE)
	{
	return Err(KeystoreError::Km(Ec::CALLER_NONCE_PROHIBITED)).context(
	"In authorize_create, NONCE is present,
	although CALLER_NONCE is not present",
	);
	}

	if !user_secure_ids.is_empty() {
	// per op auth token
	if !is_time_out_key {
	return Ok(AuthTokenHandler::OpAuthRequired);
	} else {
	//time out token
	// TODO: retrieve it from the database
	// - in an upcoming CL
	}
	}

	// If we reach here, all authorization enforcements have passed and no auth token required.
	Ok(AuthTokenHandler::NoAuthRequired)
	}

	/// Checks if the time now since epoch is greater than (or equal, if is_given_time_inclusive is
	/// set) the given time (in milliseconds)
	fn is_given_time_passed(given_time: i64, is_given_time_inclusive: bool) -> bool {
	let duration_since_epoch = SystemTime::now().duration_since(SystemTime::UNIX_EPOCH);

	let time_since_epoch = match duration_since_epoch {
	Ok(duration) => duration.as_millis(),
	Err(_) => return false,
	};

	if is_given_time_inclusive {
	time_since_epoch >= (given_time as u128)
	} else {
	time_since_epoch > (given_time as u128)
	}
	}

	/// Check if the device is locked for the given user. If there's no entry yet for the user,
	/// we assume that the device is locked
	fn is_device_locked(&self, user_id: i32) -> bool {
	// unwrap here because there's no way this mutex guard can be poisoned and
	// because there's no way to recover, even if it is poisoned.
	let set = self.device_unlocked_set.lock().unwrap();
	!set.contains(&user_id)
	}

	/// Sets the device locked status for the user. This method is called externally.
	pub fn set_device_locked(&self, user_id: i32, device_locked_status: bool) {
	// unwrap here because there's no way this mutex guard can be poisoned and
	// because there's no way to recover, even if it is poisoned.
	let mut set = self.device_unlocked_set.lock().unwrap();
	if device_locked_status {
	set.remove(&user_id);
	} else {
	set.insert(user_id);
	}
	}

	/// Add this auth token to the database.
	/// Then check if there is an entry in the op_auth_map, indexed by the challenge of this
	/// auth token (which could have been inserted during create_operation of an operation on a
	/// per-op-auth key). If so, add a copy of this auth token to the map indexed by the
	/// challenge.
	pub fn add_auth_token(&self, auth_token: HardwareAuthToken) -> Result<()> {
	//it is ok to unwrap here, because there is no way this lock can get poisoned and
	//and there is no way to recover if it is poisoned.
	let mut op_auth_map_guard = self.op_auth_map.lock().unwrap();

	if op_auth_map_guard.contains_key(&auth_token.challenge) {
	let auth_token_copy = HardwareAuthToken {
	challenge: auth_token.challenge,
	userId: auth_token.userId,
	authenticatorId: auth_token.authenticatorId,
	authenticatorType: HardwareAuthenticatorType(auth_token.authenticatorType.0),
	timestamp: Timestamp { milliSeconds: auth_token.timestamp.milliSeconds },
	mac: auth_token.mac.clone(),
	};
	op_auth_map_guard.insert(auth_token.challenge, Some(auth_token_copy));
	}

	DB.with(\|db\| db.borrow_mut().insert_auth_token(&auth_token))
	.context("In add_auth_token.")?;
	Ok(())
	}
	}

	impl Default for Enforcements {
	fn default() -> Self {
	Self::new()
	}
	}

	// TODO: Add tests to enforcement module (b/175578618).