| Alexey Tarasov | 3b226f9 | 2009-10-25 01:37:37 +1100 | [diff] [blame] | 1 | /* | 
|  | 2 | * Copyright (C) 2009 bsdroid project | 
|  | 3 | *               Alexey Tarasov <tarasov@dodologics.com> | 
|  | 4 | * | 
|  | 5 | * Copyright (C) 2007 The Android Open Source Project | 
|  | 6 | * | 
|  | 7 | * Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | 8 | * you may not use this file except in compliance with the License. | 
|  | 9 | * You may obtain a copy of the License at | 
|  | 10 | * | 
|  | 11 | *      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | 12 | * | 
|  | 13 | * Unless required by applicable law or agreed to in writing, software | 
|  | 14 | * distributed under the License is distributed on an "AS IS" BASIS, | 
|  | 15 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | 16 | * See the License for the specific language governing permissions and | 
|  | 17 | * limitations under the License. | 
|  | 18 | */ | 
|  | 19 |  | 
|  | 20 | #include <sys/endian.h> | 
|  | 21 | #include <sys/ioctl.h> | 
|  | 22 | #include <sys/types.h> | 
|  | 23 | #include <sys/uio.h> | 
|  | 24 |  | 
|  | 25 | #include <err.h> | 
|  | 26 | #include <errno.h> | 
|  | 27 | #include <poll.h> | 
|  | 28 | #include <stdio.h> | 
|  | 29 | #include <stdlib.h> | 
|  | 30 | #include <strings.h> | 
|  | 31 | #include <string.h> | 
|  | 32 | #include <sysexits.h> | 
|  | 33 | #include <unistd.h> | 
|  | 34 | #include <libusb.h> | 
|  | 35 | #include "sysdeps.h" | 
|  | 36 |  | 
|  | 37 | #define   TRACE_TAG  TRACE_USB | 
|  | 38 | #include "adb.h" | 
|  | 39 |  | 
|  | 40 | static adb_mutex_t usb_lock = ADB_MUTEX_INITIALIZER; | 
|  | 41 | static libusb_context *ctx = NULL; | 
|  | 42 |  | 
|  | 43 | struct usb_handle | 
|  | 44 | { | 
|  | 45 | usb_handle            *prev; | 
|  | 46 | usb_handle            *next; | 
|  | 47 |  | 
|  | 48 | libusb_device         *dev; | 
|  | 49 | libusb_device_handle  *devh; | 
|  | 50 | int                   interface; | 
|  | 51 | uint8_t               dev_bus; | 
|  | 52 | uint8_t               dev_addr; | 
|  | 53 |  | 
|  | 54 | int                   zero_mask; | 
|  | 55 | unsigned char         end_point_address[2]; | 
|  | 56 | char                  serial[128]; | 
|  | 57 |  | 
|  | 58 | adb_cond_t            notify; | 
|  | 59 | adb_mutex_t           lock; | 
|  | 60 | }; | 
|  | 61 |  | 
|  | 62 | static struct usb_handle handle_list = { | 
|  | 63 | .prev = &handle_list, | 
|  | 64 | .next = &handle_list, | 
|  | 65 | }; | 
|  | 66 |  | 
|  | 67 | void | 
|  | 68 | usb_cleanup() | 
|  | 69 | { | 
|  | 70 | libusb_exit(ctx); | 
|  | 71 | } | 
|  | 72 |  | 
|  | 73 | void | 
|  | 74 | report_bulk_libusb_error(int r) | 
|  | 75 | { | 
|  | 76 | switch (r) { | 
|  | 77 | case LIBUSB_ERROR_TIMEOUT: | 
|  | 78 | D("Transfer timeout\n"); | 
|  | 79 | break; | 
|  | 80 |  | 
|  | 81 | case LIBUSB_ERROR_PIPE: | 
|  | 82 | D("Control request is not supported\n"); | 
|  | 83 | break; | 
|  | 84 |  | 
|  | 85 | case LIBUSB_ERROR_OVERFLOW: | 
|  | 86 | D("Device offered more data\n"); | 
|  | 87 | break; | 
|  | 88 |  | 
|  | 89 | case LIBUSB_ERROR_NO_DEVICE : | 
|  | 90 | D("Device was disconnected\n"); | 
|  | 91 | break; | 
|  | 92 |  | 
|  | 93 | default: | 
|  | 94 | D("Error %d during transfer\n", r); | 
|  | 95 | break; | 
|  | 96 | }; | 
|  | 97 | } | 
|  | 98 |  | 
|  | 99 | static int | 
|  | 100 | usb_bulk_write(usb_handle *uh, const void *data, int len) | 
|  | 101 | { | 
|  | 102 | int r = 0; | 
|  | 103 | int transferred = 0; | 
|  | 104 |  | 
|  | 105 | r = libusb_bulk_transfer(uh->devh, uh->end_point_address[1], (void *)data, len, | 
|  | 106 | &transferred, 0); | 
|  | 107 |  | 
|  | 108 | if (r != 0) { | 
|  | 109 | D("usb_bulk_write(): "); | 
|  | 110 | report_bulk_libusb_error(r); | 
|  | 111 | return r; | 
|  | 112 | } | 
|  | 113 |  | 
|  | 114 | return (transferred); | 
|  | 115 | } | 
|  | 116 |  | 
|  | 117 | static int | 
|  | 118 | usb_bulk_read(usb_handle *uh, void *data, int len) | 
|  | 119 | { | 
|  | 120 | int r = 0; | 
|  | 121 | int transferred = 0; | 
|  | 122 |  | 
|  | 123 | r = libusb_bulk_transfer(uh->devh, uh->end_point_address[0], data, len, | 
|  | 124 | &transferred, 0); | 
|  | 125 |  | 
|  | 126 | if (r != 0) { | 
|  | 127 | D("usb_bulk_read(): "); | 
|  | 128 | report_bulk_libusb_error(r); | 
|  | 129 | return r; | 
|  | 130 | } | 
|  | 131 |  | 
|  | 132 | return (transferred); | 
|  | 133 | } | 
|  | 134 |  | 
|  | 135 | int | 
|  | 136 | usb_write(struct usb_handle *uh, const void *_data, int len) | 
|  | 137 | { | 
|  | 138 | unsigned char *data = (unsigned char*) _data; | 
|  | 139 | int n; | 
|  | 140 | int need_zero = 0; | 
|  | 141 |  | 
|  | 142 | if (uh->zero_mask == 1) { | 
|  | 143 | if (!(len & uh->zero_mask)) { | 
|  | 144 | need_zero = 1; | 
|  | 145 | } | 
|  | 146 | } | 
|  | 147 |  | 
|  | 148 | D("usb_write(): %p:%d -> transport %p\n", _data, len, uh); | 
|  | 149 |  | 
|  | 150 | while (len > 0) { | 
|  | 151 | int xfer = (len > 4096) ? 4096 : len; | 
|  | 152 |  | 
|  | 153 | n = usb_bulk_write(uh, data, xfer); | 
|  | 154 |  | 
|  | 155 | if (n != xfer) { | 
|  | 156 | D("usb_write(): failed for transport %p (%d bytes left)\n", uh, len); | 
|  | 157 | return -1; | 
|  | 158 | } | 
|  | 159 |  | 
|  | 160 | len -= xfer; | 
|  | 161 | data += xfer; | 
|  | 162 | } | 
|  | 163 |  | 
|  | 164 | if (need_zero){ | 
|  | 165 | n = usb_bulk_write(uh, _data, 0); | 
|  | 166 |  | 
|  | 167 | if (n < 0) { | 
|  | 168 | D("usb_write(): failed to finish operation for transport %p\n", uh); | 
|  | 169 | } | 
|  | 170 | return n; | 
|  | 171 | } | 
|  | 172 |  | 
|  | 173 | return 0; | 
|  | 174 | } | 
|  | 175 |  | 
|  | 176 | int | 
|  | 177 | usb_read(struct usb_handle *uh, void *_data, int len) | 
|  | 178 | { | 
|  | 179 | unsigned char *data = (unsigned char*) _data; | 
|  | 180 | int n; | 
|  | 181 |  | 
|  | 182 | D("usb_read(): %p:%d <- transport %p\n", _data, len, uh); | 
|  | 183 |  | 
|  | 184 | while (len > 0) { | 
|  | 185 | int xfer = (len > 4096) ? 4096 : len; | 
|  | 186 |  | 
|  | 187 | n = usb_bulk_read(uh, data, xfer); | 
|  | 188 |  | 
|  | 189 | if (n != xfer) { | 
|  | 190 | if (n > 0) { | 
|  | 191 | data += n; | 
|  | 192 | len -= n; | 
|  | 193 | continue; | 
|  | 194 | } | 
|  | 195 |  | 
|  | 196 | D("usb_read(): failed for transport %p (%d bytes left)\n", uh, len); | 
|  | 197 | return -1; | 
|  | 198 | } | 
|  | 199 |  | 
|  | 200 | len -= xfer; | 
|  | 201 | data += xfer; | 
|  | 202 | } | 
|  | 203 |  | 
|  | 204 | return 0; | 
|  | 205 | } | 
|  | 206 |  | 
|  | 207 | int | 
|  | 208 | usb_close(struct usb_handle *h) | 
|  | 209 | { | 
|  | 210 | D("usb_close(): closing transport %p\n", h); | 
|  | 211 | adb_mutex_lock(&usb_lock); | 
|  | 212 |  | 
|  | 213 | h->next->prev = h->prev; | 
|  | 214 | h->prev->next = h->next; | 
|  | 215 | h->prev = NULL; | 
|  | 216 | h->next = NULL; | 
|  | 217 |  | 
|  | 218 | libusb_release_interface(h->devh, h->interface); | 
|  | 219 | libusb_close(h->devh); | 
|  | 220 | libusb_unref_device(h->dev); | 
|  | 221 |  | 
|  | 222 | adb_mutex_unlock(&usb_lock); | 
|  | 223 |  | 
|  | 224 | free(h); | 
|  | 225 |  | 
|  | 226 | return (0); | 
|  | 227 | } | 
|  | 228 |  | 
|  | 229 | void usb_kick(struct usb_handle *h) | 
|  | 230 | { | 
|  | 231 | D("usb_cick(): kicking transport %p\n", h); | 
|  | 232 |  | 
|  | 233 | adb_mutex_lock(&h->lock); | 
|  | 234 | unregister_usb_transport(h); | 
|  | 235 | adb_mutex_unlock(&h->lock); | 
|  | 236 |  | 
|  | 237 | h->next->prev = h->prev; | 
|  | 238 | h->prev->next = h->next; | 
|  | 239 | h->prev = NULL; | 
|  | 240 | h->next = NULL; | 
|  | 241 |  | 
|  | 242 | libusb_release_interface(h->devh, h->interface); | 
|  | 243 | libusb_close(h->devh); | 
|  | 244 | libusb_unref_device(h->dev); | 
|  | 245 | free(h); | 
|  | 246 | } | 
|  | 247 |  | 
|  | 248 | int | 
|  | 249 | check_usb_interface(libusb_interface *interface, | 
|  | 250 | libusb_device_descriptor *desc, | 
|  | 251 | struct usb_handle *uh) | 
|  | 252 | { | 
|  | 253 | int e; | 
|  | 254 |  | 
|  | 255 | if (interface->num_altsetting == 0) { | 
|  | 256 | D("check_usb_interface(): No interface settings\n"); | 
|  | 257 | return -1; | 
|  | 258 | } | 
|  | 259 |  | 
|  | 260 | libusb_interface_descriptor *idesc = &interface->altsetting[0]; | 
|  | 261 |  | 
|  | 262 | if (idesc->bNumEndpoints != 2) { | 
|  | 263 | D("check_usb_interface(): Interface have not 2 endpoints, ignoring\n"); | 
|  | 264 | return -1; | 
|  | 265 | } | 
|  | 266 |  | 
|  | 267 | for (e = 0; e < idesc->bNumEndpoints; e++) { | 
|  | 268 | libusb_endpoint_descriptor *edesc = &idesc->endpoint[e]; | 
|  | 269 |  | 
|  | 270 | if (edesc->bmAttributes != LIBUSB_TRANSFER_TYPE_BULK) { | 
|  | 271 | D("check_usb_interface(): Endpoint (%u) is not bulk (%u), ignoring\n", | 
|  | 272 | edesc->bmAttributes, LIBUSB_TRANSFER_TYPE_BULK); | 
|  | 273 | return -1; | 
|  | 274 | } | 
|  | 275 |  | 
|  | 276 | if (edesc->bEndpointAddress & LIBUSB_ENDPOINT_IN) | 
|  | 277 | uh->end_point_address[0] = edesc->bEndpointAddress; | 
|  | 278 | else | 
|  | 279 | uh->end_point_address[1] = edesc->bEndpointAddress; | 
|  | 280 |  | 
|  | 281 | /* aproto 01 needs 0 termination */ | 
|  | 282 | if (idesc->bInterfaceProtocol == 0x01) { | 
|  | 283 | uh->zero_mask = edesc->wMaxPacketSize - 1; | 
|  | 284 | D("check_usb_interface(): Forced Android interface protocol v.1\n"); | 
|  | 285 | } | 
|  | 286 | } | 
|  | 287 |  | 
|  | 288 | D("check_usb_interface(): Device: %04x:%04x " | 
|  | 289 | "iclass: %x, isclass: %x, iproto: %x ep: %x/%x-> ", | 
|  | 290 | desc->idVendor, desc->idProduct, idesc->bInterfaceClass, | 
|  | 291 | idesc->bInterfaceSubClass, idesc->bInterfaceProtocol, | 
|  | 292 | uh->end_point_address[0], uh->end_point_address[1]); | 
|  | 293 |  | 
|  | 294 | if (!is_adb_interface(desc->idVendor, desc->idProduct, | 
|  | 295 | idesc->bInterfaceClass, idesc->bInterfaceSubClass, | 
|  | 296 | idesc->bInterfaceProtocol)) | 
|  | 297 | { | 
|  | 298 | D("not matches\n"); | 
|  | 299 | return -1; | 
|  | 300 | } | 
|  | 301 |  | 
|  | 302 | D("matches\n"); | 
|  | 303 | return 1; | 
|  | 304 | } | 
|  | 305 |  | 
|  | 306 | int | 
|  | 307 | check_usb_interfaces(libusb_config_descriptor *config, | 
|  | 308 | libusb_device_descriptor *desc, struct usb_handle *uh) | 
|  | 309 | { | 
|  | 310 | int i; | 
|  | 311 |  | 
|  | 312 | for (i = 0; i < config->bNumInterfaces; ++i) { | 
|  | 313 | if (check_usb_interface(&config->interface[i], desc, uh) != -1) { | 
|  | 314 | /* found some interface and saved information about it */ | 
|  | 315 | D("check_usb_interfaces(): Interface %d of %04x:%04x " | 
|  | 316 | "matches Android device\n", i, desc->idVendor, | 
|  | 317 | desc->idProduct); | 
|  | 318 |  | 
|  | 319 | return  i; | 
|  | 320 | } | 
|  | 321 | } | 
|  | 322 |  | 
|  | 323 | return -1; | 
|  | 324 | } | 
|  | 325 |  | 
|  | 326 | int | 
|  | 327 | register_device(struct usb_handle *uh, const char *serial) | 
|  | 328 | { | 
|  | 329 | D("register_device(): Registering %p [%s] as USB transport\n", | 
|  | 330 | uh, serial); | 
|  | 331 |  | 
|  | 332 | struct usb_handle *usb= NULL; | 
|  | 333 |  | 
|  | 334 | usb = calloc(1, sizeof(struct usb_handle)); | 
|  | 335 | memcpy(usb, uh, sizeof(struct usb_handle)); | 
|  | 336 | strcpy(usb->serial, uh->serial); | 
|  | 337 |  | 
|  | 338 | adb_cond_init(&usb->notify, 0); | 
|  | 339 | adb_mutex_init(&usb->lock, 0); | 
|  | 340 |  | 
|  | 341 | adb_mutex_lock(&usb_lock); | 
|  | 342 |  | 
|  | 343 | usb->next = &handle_list; | 
|  | 344 | usb->prev = handle_list.prev; | 
|  | 345 | usb->prev->next = usb; | 
|  | 346 | usb->next->prev = usb; | 
|  | 347 |  | 
|  | 348 | adb_mutex_unlock(&usb_lock); | 
|  | 349 |  | 
|  | 350 | register_usb_transport(usb, serial, 1); | 
|  | 351 |  | 
|  | 352 | return (1); | 
|  | 353 | } | 
|  | 354 |  | 
|  | 355 | int | 
|  | 356 | already_registered(usb_handle *uh) | 
|  | 357 | { | 
|  | 358 | struct usb_handle *usb= NULL; | 
|  | 359 | int exists = 0; | 
|  | 360 |  | 
|  | 361 | adb_mutex_lock(&usb_lock); | 
|  | 362 |  | 
|  | 363 | for (usb = handle_list.next; usb != &handle_list; usb = usb->next) { | 
|  | 364 | if ((usb->dev_bus == uh->dev_bus) && | 
|  | 365 | (usb->dev_addr == uh->dev_addr)) | 
|  | 366 | { | 
|  | 367 | exists = 1; | 
|  | 368 | break; | 
|  | 369 | } | 
|  | 370 | } | 
|  | 371 |  | 
|  | 372 | adb_mutex_unlock(&usb_lock); | 
|  | 373 |  | 
|  | 374 | return exists; | 
|  | 375 | } | 
|  | 376 |  | 
|  | 377 | void | 
|  | 378 | check_device(libusb_device *dev) | 
|  | 379 | { | 
|  | 380 | struct usb_handle uh; | 
|  | 381 | int i = 0; | 
|  | 382 | int found = -1; | 
|  | 383 | char serial[256] = {0}; | 
|  | 384 |  | 
|  | 385 | libusb_device_descriptor desc; | 
|  | 386 | libusb_config_descriptor *config = NULL; | 
|  | 387 |  | 
|  | 388 | int r = libusb_get_device_descriptor(dev, &desc); | 
|  | 389 |  | 
|  | 390 | if (r != LIBUSB_SUCCESS) { | 
|  | 391 | D("check_device(): Failed to get device descriptor\n"); | 
|  | 392 | return; | 
|  | 393 | } | 
|  | 394 |  | 
|  | 395 | if ((desc.idVendor == 0) && (desc.idProduct == 0)) | 
|  | 396 | return; | 
|  | 397 |  | 
|  | 398 | D("check_device(): Probing usb device %04x:%04x\n", | 
|  | 399 | desc.idVendor, desc.idProduct); | 
|  | 400 |  | 
|  | 401 | if (!is_adb_interface (desc.idVendor, desc.idProduct, | 
|  | 402 | ADB_CLASS, ADB_SUBCLASS, ADB_PROTOCOL)) | 
|  | 403 | { | 
|  | 404 | D("check_device(): Ignored due unknown vendor id\n"); | 
|  | 405 | return; | 
|  | 406 | } | 
|  | 407 |  | 
|  | 408 | uh.dev_bus = libusb_get_bus_number(dev); | 
|  | 409 | uh.dev_addr = libusb_get_device_address(dev); | 
|  | 410 |  | 
|  | 411 | if (already_registered(&uh)) { | 
|  | 412 | D("check_device(): Device (bus: %d, address: %d) " | 
|  | 413 | "is already registered\n", uh.dev_bus, uh.dev_addr); | 
|  | 414 | return; | 
|  | 415 | } | 
|  | 416 |  | 
|  | 417 | D("check_device(): Device bus: %d, address: %d\n", | 
|  | 418 | uh.dev_bus, uh.dev_addr); | 
|  | 419 |  | 
|  | 420 | r = libusb_get_active_config_descriptor(dev, &config); | 
|  | 421 |  | 
|  | 422 | if (r != 0) { | 
|  | 423 | if (r == LIBUSB_ERROR_NOT_FOUND) { | 
|  | 424 | D("check_device(): Device %4x:%4x is unconfigured\n", | 
|  | 425 | desc.idVendor, desc.idProduct); | 
|  | 426 | return; | 
|  | 427 | } | 
|  | 428 |  | 
|  | 429 | D("check_device(): Failed to get configuration for %4x:%4x\n", | 
|  | 430 | desc.idVendor, desc.idProduct); | 
|  | 431 | return; | 
|  | 432 | } | 
|  | 433 |  | 
|  | 434 | if (config == NULL) { | 
|  | 435 | D("check_device(): Sanity check failed after " | 
|  | 436 | "getting active config\n"); | 
|  | 437 | return; | 
|  | 438 | } | 
|  | 439 |  | 
|  | 440 | if (config->interface != NULL) { | 
|  | 441 | found = check_usb_interfaces(config, &desc, &uh); | 
|  | 442 | } | 
|  | 443 |  | 
|  | 444 | /* not needed anymore */ | 
|  | 445 | libusb_free_config_descriptor(config); | 
|  | 446 |  | 
|  | 447 | r = libusb_open(dev, &uh.devh); | 
|  | 448 | uh.dev = dev; | 
|  | 449 |  | 
|  | 450 | if (r != 0) { | 
|  | 451 | switch (r) { | 
|  | 452 | case LIBUSB_ERROR_NO_MEM: | 
|  | 453 | D("check_device(): Memory allocation problem\n"); | 
|  | 454 | break; | 
|  | 455 |  | 
|  | 456 | case LIBUSB_ERROR_ACCESS: | 
|  | 457 | D("check_device(): Permissions problem, " | 
|  | 458 | "current user priveleges are messed up?\n"); | 
|  | 459 | break; | 
|  | 460 |  | 
|  | 461 | case LIBUSB_ERROR_NO_DEVICE: | 
|  | 462 | D("check_device(): Device disconected, bad cable?\n"); | 
|  | 463 | break; | 
|  | 464 |  | 
|  | 465 | default: | 
|  | 466 | D("check_device(): libusb triggered error %d\n", r); | 
|  | 467 | } | 
|  | 468 | // skip rest | 
|  | 469 | found = -1; | 
|  | 470 | } | 
|  | 471 |  | 
|  | 472 | if (found >= 0) { | 
|  | 473 | D("check_device(): Device matches Android interface\n"); | 
|  | 474 | // read the device's serial number | 
|  | 475 | memset(serial, 0, sizeof(serial)); | 
|  | 476 | uh.interface = found; | 
|  | 477 |  | 
|  | 478 | r = libusb_claim_interface(uh.devh, uh.interface); | 
|  | 479 |  | 
|  | 480 | if (r < 0) { | 
|  | 481 | D("check_device(): Failed to claim interface %d\n", | 
|  | 482 | uh.interface); | 
|  | 483 |  | 
|  | 484 | goto fail; | 
|  | 485 | } | 
|  | 486 |  | 
|  | 487 | if (desc.iSerialNumber) { | 
|  | 488 | // reading serial | 
|  | 489 | uint16_t    buffer[128] = {0}; | 
|  | 490 | uint16_t    languages[128] = {0}; | 
|  | 491 | int languageCount = 0; | 
|  | 492 |  | 
|  | 493 | memset(languages, 0, sizeof(languages)); | 
|  | 494 | r = libusb_control_transfer(uh.devh, | 
|  | 495 | LIBUSB_ENDPOINT_IN |  LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE, | 
|  | 496 | LIBUSB_REQUEST_GET_DESCRIPTOR, LIBUSB_DT_STRING << 8, | 
|  | 497 | 0, (uint8_t *)languages, sizeof(languages), 0); | 
|  | 498 |  | 
|  | 499 | if (r <= 0) { | 
|  | 500 | D("check_device(): Failed to get languages count\n"); | 
|  | 501 | goto fail; | 
|  | 502 | } | 
|  | 503 |  | 
|  | 504 | languageCount = (r - 2) / 2; | 
|  | 505 |  | 
|  | 506 | for (i = 1; i <= languageCount; ++i) { | 
|  | 507 | memset(buffer, 0, sizeof(buffer)); | 
|  | 508 |  | 
|  | 509 | r = libusb_control_transfer(uh.devh, | 
|  | 510 | LIBUSB_ENDPOINT_IN |  LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE, | 
|  | 511 | LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_STRING << 8) | desc.iSerialNumber, | 
|  | 512 | languages[i], (uint8_t *)buffer, sizeof(buffer), 0); | 
|  | 513 |  | 
|  | 514 | if (r > 0) { /* converting serial */ | 
|  | 515 | int j = 0; | 
|  | 516 | r /= 2; | 
|  | 517 |  | 
|  | 518 | for (j = 1; j < r; ++j) | 
|  | 519 | serial[j - 1] = buffer[j]; | 
|  | 520 |  | 
|  | 521 | serial[j - 1] = '\0'; | 
|  | 522 | break; /* languagesCount cycle */ | 
|  | 523 | } | 
|  | 524 | } | 
|  | 525 |  | 
|  | 526 | if (register_device(&uh, serial) == 0) { | 
|  | 527 | D("check_device(): Failed to register device\n"); | 
|  | 528 | goto fail_interface; | 
|  | 529 | } | 
|  | 530 |  | 
|  | 531 | libusb_ref_device(dev); | 
|  | 532 | } | 
|  | 533 | } | 
|  | 534 |  | 
|  | 535 | return; | 
|  | 536 |  | 
|  | 537 | fail_interface: | 
|  | 538 | libusb_release_interface(uh.devh, uh.interface); | 
|  | 539 |  | 
|  | 540 | fail: | 
|  | 541 | libusb_close(uh.devh); | 
|  | 542 | uh.devh = NULL; | 
|  | 543 | } | 
|  | 544 |  | 
|  | 545 | int | 
|  | 546 | check_device_connected(struct usb_handle *uh) | 
|  | 547 | { | 
|  | 548 | int r = libusb_kernel_driver_active(uh->devh, uh->interface); | 
|  | 549 |  | 
|  | 550 | if (r == LIBUSB_ERROR_NO_DEVICE) | 
|  | 551 | return 0; | 
|  | 552 |  | 
|  | 553 | if (r < 0) | 
|  | 554 | return -1; | 
|  | 555 |  | 
|  | 556 | return 1; | 
|  | 557 | } | 
|  | 558 |  | 
|  | 559 | void | 
|  | 560 | kick_disconnected() | 
|  | 561 | { | 
|  | 562 | struct usb_handle *usb= NULL; | 
|  | 563 |  | 
|  | 564 | adb_mutex_lock(&usb_lock); | 
|  | 565 |  | 
|  | 566 | for (usb = handle_list.next; usb != &handle_list; usb = usb->next) { | 
|  | 567 |  | 
|  | 568 | if (check_device_connected(usb) == 0) { | 
|  | 569 | D("kick_disconnected(): Transport %p is not online anymore\n", | 
|  | 570 | usb); | 
|  | 571 |  | 
|  | 572 | usb_kick(usb); | 
|  | 573 | } | 
|  | 574 | } | 
|  | 575 |  | 
|  | 576 | adb_mutex_unlock(&usb_lock); | 
|  | 577 | } | 
|  | 578 |  | 
|  | 579 | void | 
|  | 580 | scan_usb_devices() | 
|  | 581 | { | 
|  | 582 | D("scan_usb_devices(): started\n"); | 
|  | 583 |  | 
|  | 584 | libusb_device **devs= NULL; | 
|  | 585 | libusb_device *dev= NULL; | 
|  | 586 | ssize_t cnt = libusb_get_device_list(ctx, &devs); | 
|  | 587 |  | 
|  | 588 | if (cnt < 0) { | 
|  | 589 | D("scan_usb_devices(): Failed to get device list (error: %d)\n", | 
|  | 590 | cnt); | 
|  | 591 |  | 
|  | 592 | return; | 
|  | 593 | } | 
|  | 594 |  | 
|  | 595 | int i = 0; | 
|  | 596 |  | 
|  | 597 | while ((dev = devs[i++]) != NULL) { | 
|  | 598 | check_device(dev); | 
|  | 599 | } | 
|  | 600 |  | 
|  | 601 | libusb_free_device_list(devs, 1); | 
|  | 602 | } | 
|  | 603 |  | 
|  | 604 | void * | 
|  | 605 | device_poll_thread(void* unused) | 
|  | 606 | { | 
|  | 607 | D("device_poll_thread(): Created USB scan thread\n"); | 
|  | 608 |  | 
|  | 609 | for (;;) { | 
|  | 610 | sleep(5); | 
|  | 611 | kick_disconnected(); | 
|  | 612 | scan_usb_devices(); | 
|  | 613 | } | 
|  | 614 |  | 
|  | 615 | /* never reaching this point */ | 
|  | 616 | return (NULL); | 
|  | 617 | } | 
|  | 618 |  | 
|  | 619 | static void | 
|  | 620 | sigalrm_handler(int signo) | 
|  | 621 | { | 
|  | 622 | /* nothing */ | 
|  | 623 | } | 
|  | 624 |  | 
|  | 625 | void | 
|  | 626 | usb_init() | 
|  | 627 | { | 
|  | 628 | D("usb_init(): started\n"); | 
|  | 629 | adb_thread_t        tid; | 
|  | 630 | struct sigaction actions; | 
|  | 631 |  | 
|  | 632 | int r = libusb_init(&ctx); | 
|  | 633 |  | 
|  | 634 | if (r != LIBUSB_SUCCESS) { | 
|  | 635 | err(EX_IOERR, "Failed to init libusb\n"); | 
|  | 636 | } | 
|  | 637 |  | 
|  | 638 | memset(&actions, 0, sizeof(actions)); | 
|  | 639 |  | 
|  | 640 | sigemptyset(&actions.sa_mask); | 
|  | 641 |  | 
|  | 642 | actions.sa_flags = 0; | 
|  | 643 | actions.sa_handler = sigalrm_handler; | 
|  | 644 |  | 
|  | 645 | sigaction(SIGALRM, &actions, NULL); | 
|  | 646 |  | 
|  | 647 | /* initial device scan */ | 
|  | 648 | scan_usb_devices(); | 
|  | 649 |  | 
|  | 650 | /* starting USB event polling thread */ | 
|  | 651 | if (adb_thread_create(&tid, device_poll_thread, NULL)) { | 
|  | 652 | err(EX_IOERR, "cannot create USB scan thread\n"); | 
|  | 653 | } | 
|  | 654 |  | 
|  | 655 | D("usb_init(): finished\n"); | 
|  | 656 | } | 
|  | 657 |  |