| Alexey Tarasov | 3b226f9 | 2009-10-25 01:37:37 +1100 | [diff] [blame] | 1 | /*  | 
 | 2 |  * Copyright (C) 2009 bsdroid project | 
 | 3 |  *               Alexey Tarasov <tarasov@dodologics.com> | 
 | 4 |  *    | 
 | 5 |  * Copyright (C) 2007 The Android Open Source Project | 
 | 6 |  *  | 
 | 7 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 | 8 |  * you may not use this file except in compliance with the License. | 
 | 9 |  * You may obtain a copy of the License at | 
 | 10 |  * | 
 | 11 |  *      http://www.apache.org/licenses/LICENSE-2.0 | 
 | 12 |  * | 
 | 13 |  * Unless required by applicable law or agreed to in writing, software | 
 | 14 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 | 15 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 | 16 |  * See the License for the specific language governing permissions and | 
 | 17 |  * limitations under the License. | 
 | 18 |  */ | 
 | 19 |  | 
 | 20 | #include <sys/endian.h> | 
 | 21 | #include <sys/ioctl.h> | 
 | 22 | #include <sys/types.h> | 
 | 23 | #include <sys/uio.h> | 
 | 24 |  | 
 | 25 | #include <err.h> | 
 | 26 | #include <errno.h> | 
 | 27 | #include <poll.h> | 
 | 28 | #include <stdio.h> | 
 | 29 | #include <stdlib.h> | 
 | 30 | #include <strings.h> | 
 | 31 | #include <string.h> | 
 | 32 | #include <sysexits.h> | 
 | 33 | #include <unistd.h> | 
 | 34 | #include <libusb.h> | 
 | 35 | #include "sysdeps.h" | 
 | 36 |  | 
 | 37 | #define   TRACE_TAG  TRACE_USB | 
 | 38 | #include "adb.h" | 
 | 39 |  | 
 | 40 | static adb_mutex_t usb_lock = ADB_MUTEX_INITIALIZER; | 
 | 41 | static libusb_context *ctx = NULL; | 
 | 42 |  | 
 | 43 | struct usb_handle | 
 | 44 | { | 
 | 45 |     usb_handle            *prev; | 
 | 46 |     usb_handle            *next; | 
 | 47 |  | 
 | 48 |     libusb_device         *dev; | 
 | 49 |     libusb_device_handle  *devh; | 
 | 50 |     int                   interface; | 
 | 51 |     uint8_t               dev_bus; | 
 | 52 |     uint8_t               dev_addr; | 
 | 53 | 	 | 
 | 54 |     int                   zero_mask; | 
 | 55 |     unsigned char         end_point_address[2]; | 
 | 56 |     char                  serial[128]; | 
 | 57 |      | 
 | 58 |     adb_cond_t            notify; | 
 | 59 |     adb_mutex_t           lock; | 
 | 60 | }; | 
 | 61 |  | 
 | 62 | static struct usb_handle handle_list = { | 
 | 63 |         .prev = &handle_list, | 
 | 64 |         .next = &handle_list, | 
 | 65 | }; | 
 | 66 |  | 
 | 67 | void | 
 | 68 | usb_cleanup() | 
 | 69 | { | 
 | 70 | 	libusb_exit(ctx); | 
 | 71 | } | 
 | 72 |  | 
 | 73 | void | 
 | 74 | report_bulk_libusb_error(int r) | 
 | 75 | { | 
 | 76 |     switch (r) { | 
 | 77 |     case LIBUSB_ERROR_TIMEOUT: | 
 | 78 |         D("Transfer timeout\n"); | 
 | 79 |         break; | 
 | 80 |  | 
 | 81 |     case LIBUSB_ERROR_PIPE: | 
 | 82 |         D("Control request is not supported\n"); | 
 | 83 |         break; | 
 | 84 |  | 
 | 85 |     case LIBUSB_ERROR_OVERFLOW: | 
 | 86 |         D("Device offered more data\n"); | 
 | 87 |         break; | 
 | 88 |  | 
 | 89 |     case LIBUSB_ERROR_NO_DEVICE : | 
 | 90 |         D("Device was disconnected\n"); | 
 | 91 |         break; | 
 | 92 |  | 
 | 93 |     default: | 
 | 94 |         D("Error %d during transfer\n", r); | 
 | 95 |         break; | 
 | 96 |     }; | 
 | 97 | } | 
 | 98 |  | 
 | 99 | static int | 
 | 100 | usb_bulk_write(usb_handle *uh, const void *data, int len) | 
 | 101 | { | 
 | 102 |     int r = 0; | 
 | 103 |     int transferred = 0; | 
 | 104 |  | 
 | 105 |     r = libusb_bulk_transfer(uh->devh, uh->end_point_address[1], (void *)data, len, | 
 | 106 |                              &transferred, 0); | 
 | 107 |     | 
 | 108 |     if (r != 0) { | 
 | 109 |         D("usb_bulk_write(): "); | 
 | 110 |         report_bulk_libusb_error(r); | 
 | 111 |         return r; | 
 | 112 |     } | 
 | 113 |     | 
 | 114 |     return (transferred); | 
 | 115 | } | 
 | 116 |  | 
 | 117 | static int | 
 | 118 | usb_bulk_read(usb_handle *uh, void *data, int len) | 
 | 119 | { | 
 | 120 |     int r = 0; | 
 | 121 |     int transferred = 0; | 
 | 122 |  | 
 | 123 |     r = libusb_bulk_transfer(uh->devh, uh->end_point_address[0], data, len, | 
 | 124 |                              &transferred, 0); | 
 | 125 |  | 
 | 126 |     if (r != 0) { | 
 | 127 |         D("usb_bulk_read(): "); | 
 | 128 |         report_bulk_libusb_error(r); | 
 | 129 |         return r; | 
 | 130 |     } | 
 | 131 |     | 
 | 132 |     return (transferred); | 
 | 133 | } | 
 | 134 |  | 
 | 135 | int | 
 | 136 | usb_write(struct usb_handle *uh, const void *_data, int len) | 
 | 137 | { | 
 | 138 |     unsigned char *data = (unsigned char*) _data; | 
 | 139 |     int n; | 
 | 140 |     int need_zero = 0; | 
 | 141 |  | 
 | 142 |     if (uh->zero_mask == 1) { | 
 | 143 |         if (!(len & uh->zero_mask)) { | 
 | 144 |             need_zero = 1; | 
 | 145 |         } | 
 | 146 |     } | 
 | 147 |  | 
 | 148 |     D("usb_write(): %p:%d -> transport %p\n", _data, len, uh); | 
 | 149 |      | 
 | 150 |     while (len > 0) { | 
 | 151 |         int xfer = (len > 4096) ? 4096 : len; | 
 | 152 |  | 
 | 153 |         n = usb_bulk_write(uh, data, xfer); | 
 | 154 |          | 
 | 155 |         if (n != xfer) { | 
 | 156 |             D("usb_write(): failed for transport %p (%d bytes left)\n", uh, len); | 
 | 157 |             return -1; | 
 | 158 |         } | 
 | 159 |  | 
 | 160 |         len -= xfer; | 
 | 161 |         data += xfer; | 
 | 162 |     } | 
 | 163 |  | 
 | 164 |     if (need_zero){ | 
 | 165 |         n = usb_bulk_write(uh, _data, 0); | 
 | 166 |          | 
 | 167 |         if (n < 0) { | 
 | 168 |             D("usb_write(): failed to finish operation for transport %p\n", uh); | 
 | 169 |         } | 
 | 170 |         return n; | 
 | 171 |     } | 
 | 172 |  | 
 | 173 |     return 0; | 
 | 174 | } | 
 | 175 |  | 
 | 176 | int | 
 | 177 | usb_read(struct usb_handle *uh, void *_data, int len) | 
 | 178 | { | 
 | 179 |     unsigned char *data = (unsigned char*) _data; | 
 | 180 |     int n; | 
 | 181 |  | 
 | 182 |     D("usb_read(): %p:%d <- transport %p\n", _data, len, uh); | 
 | 183 |      | 
 | 184 |     while (len > 0) { | 
 | 185 |         int xfer = (len > 4096) ? 4096 : len; | 
 | 186 |  | 
 | 187 |         n = usb_bulk_read(uh, data, xfer); | 
 | 188 |          | 
 | 189 |         if (n != xfer) { | 
 | 190 |             if (n > 0) { | 
 | 191 |                 data += n; | 
 | 192 |                 len -= n; | 
 | 193 |                 continue; | 
 | 194 |             } | 
 | 195 |              | 
 | 196 |             D("usb_read(): failed for transport %p (%d bytes left)\n", uh, len); | 
 | 197 |             return -1; | 
 | 198 |         } | 
 | 199 |  | 
 | 200 |         len -= xfer; | 
 | 201 |         data += xfer; | 
 | 202 |     } | 
 | 203 |  | 
 | 204 |     return 0; | 
 | 205 |  } | 
 | 206 |  | 
 | 207 | int | 
 | 208 | usb_close(struct usb_handle *h) | 
 | 209 | { | 
 | 210 |     D("usb_close(): closing transport %p\n", h); | 
 | 211 |     adb_mutex_lock(&usb_lock); | 
 | 212 |      | 
 | 213 |     h->next->prev = h->prev; | 
 | 214 |     h->prev->next = h->next; | 
 | 215 |     h->prev = NULL; | 
 | 216 |     h->next = NULL; | 
 | 217 |  | 
 | 218 |     libusb_release_interface(h->devh, h->interface); | 
 | 219 |     libusb_close(h->devh); | 
 | 220 |     libusb_unref_device(h->dev); | 
 | 221 |      | 
 | 222 |     adb_mutex_unlock(&usb_lock); | 
 | 223 |  | 
 | 224 |     free(h); | 
 | 225 |  | 
 | 226 |     return (0); | 
 | 227 | } | 
 | 228 |  | 
 | 229 | void usb_kick(struct usb_handle *h) | 
 | 230 | { | 
 | 231 |     D("usb_cick(): kicking transport %p\n", h); | 
 | 232 |      | 
 | 233 |     adb_mutex_lock(&h->lock); | 
 | 234 |     unregister_usb_transport(h); | 
 | 235 |     adb_mutex_unlock(&h->lock); | 
 | 236 |      | 
 | 237 |     h->next->prev = h->prev; | 
 | 238 |     h->prev->next = h->next; | 
 | 239 |     h->prev = NULL; | 
 | 240 |     h->next = NULL; | 
 | 241 |  | 
 | 242 |     libusb_release_interface(h->devh, h->interface); | 
 | 243 |     libusb_close(h->devh); | 
 | 244 |     libusb_unref_device(h->dev); | 
 | 245 |     free(h); | 
 | 246 | } | 
 | 247 |  | 
 | 248 | int | 
 | 249 | check_usb_interface(libusb_interface *interface, | 
 | 250 |                     libusb_device_descriptor *desc, | 
 | 251 |                     struct usb_handle *uh) | 
 | 252 | {     | 
 | 253 |     int e; | 
 | 254 |      | 
 | 255 |     if (interface->num_altsetting == 0) { | 
 | 256 |         D("check_usb_interface(): No interface settings\n"); | 
 | 257 |         return -1; | 
 | 258 |     } | 
 | 259 |      | 
 | 260 |     libusb_interface_descriptor *idesc = &interface->altsetting[0]; | 
 | 261 |      | 
 | 262 |     if (idesc->bNumEndpoints != 2) { | 
 | 263 |         D("check_usb_interface(): Interface have not 2 endpoints, ignoring\n"); | 
 | 264 |         return -1; | 
 | 265 |     } | 
 | 266 |  | 
 | 267 |     for (e = 0; e < idesc->bNumEndpoints; e++) { | 
 | 268 |         libusb_endpoint_descriptor *edesc = &idesc->endpoint[e]; | 
 | 269 |          | 
 | 270 |         if (edesc->bmAttributes != LIBUSB_TRANSFER_TYPE_BULK) { | 
 | 271 |             D("check_usb_interface(): Endpoint (%u) is not bulk (%u), ignoring\n", | 
 | 272 |                     edesc->bmAttributes, LIBUSB_TRANSFER_TYPE_BULK); | 
 | 273 |             return -1; | 
 | 274 |         } | 
 | 275 |          | 
 | 276 |         if (edesc->bEndpointAddress & LIBUSB_ENDPOINT_IN) | 
 | 277 |             uh->end_point_address[0] = edesc->bEndpointAddress; | 
 | 278 |         else | 
 | 279 |             uh->end_point_address[1] = edesc->bEndpointAddress; | 
 | 280 |          | 
 | 281 |             /* aproto 01 needs 0 termination */ | 
 | 282 |         if (idesc->bInterfaceProtocol == 0x01) { | 
 | 283 |             uh->zero_mask = edesc->wMaxPacketSize - 1; | 
 | 284 |             D("check_usb_interface(): Forced Android interface protocol v.1\n"); | 
 | 285 |         } | 
 | 286 |     } | 
 | 287 |  | 
 | 288 |     D("check_usb_interface(): Device: %04x:%04x " | 
 | 289 |       "iclass: %x, isclass: %x, iproto: %x ep: %x/%x-> ", | 
 | 290 |         desc->idVendor, desc->idProduct, idesc->bInterfaceClass, | 
 | 291 | 	idesc->bInterfaceSubClass, idesc->bInterfaceProtocol, | 
 | 292 | 	uh->end_point_address[0], uh->end_point_address[1]); | 
 | 293 |      | 
 | 294 |     if (!is_adb_interface(desc->idVendor, desc->idProduct, | 
 | 295 |             idesc->bInterfaceClass, idesc->bInterfaceSubClass, | 
 | 296 |             idesc->bInterfaceProtocol)) | 
 | 297 |     { | 
 | 298 |         D("not matches\n"); | 
 | 299 |         return -1; | 
 | 300 |     } | 
 | 301 |  | 
 | 302 |     D("matches\n"); | 
 | 303 |     return 1; | 
 | 304 | } | 
 | 305 |  | 
 | 306 | int | 
 | 307 | check_usb_interfaces(libusb_config_descriptor *config, | 
 | 308 |                      libusb_device_descriptor *desc, struct usb_handle *uh) | 
 | 309 | {   | 
 | 310 |     int i; | 
 | 311 |      | 
 | 312 |     for (i = 0; i < config->bNumInterfaces; ++i) { | 
 | 313 |         if (check_usb_interface(&config->interface[i], desc, uh) != -1) { | 
 | 314 |             /* found some interface and saved information about it */ | 
 | 315 |             D("check_usb_interfaces(): Interface %d of %04x:%04x " | 
 | 316 |               "matches Android device\n", i, desc->idVendor, | 
 | 317 | 	      desc->idProduct); | 
 | 318 |              | 
 | 319 |             return  i; | 
 | 320 |         } | 
 | 321 |     } | 
 | 322 |      | 
 | 323 |     return -1; | 
 | 324 | } | 
 | 325 |  | 
 | 326 | int | 
 | 327 | register_device(struct usb_handle *uh, const char *serial) | 
 | 328 | { | 
 | 329 |     D("register_device(): Registering %p [%s] as USB transport\n", | 
 | 330 |        uh, serial); | 
 | 331 |  | 
 | 332 |     struct usb_handle *usb= NULL; | 
 | 333 |  | 
 | 334 |     usb = calloc(1, sizeof(struct usb_handle)); | 
 | 335 |     memcpy(usb, uh, sizeof(struct usb_handle)); | 
 | 336 |     strcpy(usb->serial, uh->serial); | 
 | 337 |  | 
 | 338 |     adb_cond_init(&usb->notify, 0); | 
 | 339 |     adb_mutex_init(&usb->lock, 0); | 
 | 340 |  | 
 | 341 |     adb_mutex_lock(&usb_lock); | 
 | 342 |      | 
 | 343 |     usb->next = &handle_list; | 
 | 344 |     usb->prev = handle_list.prev; | 
 | 345 |     usb->prev->next = usb; | 
 | 346 |     usb->next->prev = usb; | 
 | 347 |  | 
 | 348 |     adb_mutex_unlock(&usb_lock); | 
 | 349 |  | 
| Scott Anderson | e109d26 | 2012-04-20 11:21:14 -0700 | [diff] [blame] | 350 |     register_usb_transport(usb, serial, NULL, 1);  | 
| Alexey Tarasov | 3b226f9 | 2009-10-25 01:37:37 +1100 | [diff] [blame] | 351 |  | 
 | 352 |     return (1); | 
 | 353 | } | 
 | 354 |  | 
 | 355 | int | 
 | 356 | already_registered(usb_handle *uh) | 
 | 357 | { | 
 | 358 |     struct usb_handle *usb= NULL; | 
 | 359 |     int exists = 0; | 
 | 360 |      | 
 | 361 |     adb_mutex_lock(&usb_lock); | 
 | 362 |  | 
 | 363 |     for (usb = handle_list.next; usb != &handle_list; usb = usb->next) { | 
 | 364 |         if ((usb->dev_bus == uh->dev_bus) && | 
 | 365 |             (usb->dev_addr == uh->dev_addr)) | 
 | 366 |         { | 
 | 367 |             exists = 1; | 
 | 368 |             break; | 
 | 369 |         } | 
 | 370 |     } | 
 | 371 |  | 
 | 372 |     adb_mutex_unlock(&usb_lock); | 
 | 373 |  | 
 | 374 |     return exists; | 
 | 375 | } | 
 | 376 |  | 
 | 377 | void | 
 | 378 | check_device(libusb_device *dev)  | 
 | 379 | { | 
 | 380 |     struct usb_handle uh; | 
 | 381 |     int i = 0; | 
 | 382 |     int found = -1; | 
 | 383 |     char serial[256] = {0}; | 
 | 384 |  | 
 | 385 |     libusb_device_descriptor desc; | 
 | 386 |     libusb_config_descriptor *config = NULL; | 
 | 387 |      | 
 | 388 |     int r = libusb_get_device_descriptor(dev, &desc); | 
 | 389 |  | 
 | 390 |     if (r != LIBUSB_SUCCESS) { | 
 | 391 |         D("check_device(): Failed to get device descriptor\n"); | 
 | 392 |         return; | 
 | 393 |     } | 
 | 394 |      | 
 | 395 |     if ((desc.idVendor == 0) && (desc.idProduct == 0)) | 
 | 396 |         return; | 
 | 397 |      | 
 | 398 |     D("check_device(): Probing usb device %04x:%04x\n", | 
 | 399 |         desc.idVendor, desc.idProduct); | 
 | 400 |      | 
 | 401 |     if (!is_adb_interface (desc.idVendor, desc.idProduct, | 
 | 402 |                            ADB_CLASS, ADB_SUBCLASS, ADB_PROTOCOL)) | 
 | 403 |     { | 
 | 404 |         D("check_device(): Ignored due unknown vendor id\n"); | 
 | 405 |         return; | 
 | 406 |     } | 
 | 407 |      | 
 | 408 |     uh.dev_bus = libusb_get_bus_number(dev); | 
 | 409 |     uh.dev_addr = libusb_get_device_address(dev); | 
 | 410 |      | 
 | 411 |     if (already_registered(&uh)) { | 
 | 412 |         D("check_device(): Device (bus: %d, address: %d) " | 
 | 413 |           "is already registered\n", uh.dev_bus, uh.dev_addr); | 
 | 414 |         return; | 
 | 415 |     } | 
 | 416 |      | 
 | 417 |     D("check_device(): Device bus: %d, address: %d\n", | 
 | 418 |         uh.dev_bus, uh.dev_addr); | 
 | 419 |  | 
 | 420 |     r = libusb_get_active_config_descriptor(dev, &config); | 
 | 421 |      | 
 | 422 |     if (r != 0) { | 
 | 423 |         if (r == LIBUSB_ERROR_NOT_FOUND) { | 
 | 424 |             D("check_device(): Device %4x:%4x is unconfigured\n",  | 
 | 425 |                 desc.idVendor, desc.idProduct); | 
 | 426 |             return; | 
 | 427 |         } | 
 | 428 |          | 
 | 429 |         D("check_device(): Failed to get configuration for %4x:%4x\n", | 
 | 430 |             desc.idVendor, desc.idProduct); | 
 | 431 |         return; | 
 | 432 |     } | 
 | 433 |      | 
 | 434 |     if (config == NULL) { | 
 | 435 |         D("check_device(): Sanity check failed after " | 
 | 436 |           "getting active config\n"); | 
 | 437 |         return; | 
 | 438 |     } | 
 | 439 |      | 
 | 440 |     if (config->interface != NULL) { | 
 | 441 |         found = check_usb_interfaces(config, &desc, &uh); | 
 | 442 |     } | 
 | 443 |      | 
 | 444 |     /* not needed anymore */ | 
 | 445 |     libusb_free_config_descriptor(config); | 
 | 446 |      | 
 | 447 |     r = libusb_open(dev, &uh.devh); | 
 | 448 |     uh.dev = dev; | 
 | 449 |  | 
 | 450 |     if (r != 0) { | 
 | 451 |         switch (r) { | 
 | 452 |             case LIBUSB_ERROR_NO_MEM: | 
 | 453 |                 D("check_device(): Memory allocation problem\n"); | 
 | 454 |                 break; | 
 | 455 |                  | 
 | 456 |             case LIBUSB_ERROR_ACCESS: | 
 | 457 |                 D("check_device(): Permissions problem, " | 
 | 458 |                   "current user priveleges are messed up?\n"); | 
 | 459 |                 break; | 
 | 460 |                  | 
 | 461 |             case LIBUSB_ERROR_NO_DEVICE: | 
 | 462 |                 D("check_device(): Device disconected, bad cable?\n"); | 
 | 463 |                 break; | 
 | 464 |              | 
 | 465 |             default: | 
 | 466 |                 D("check_device(): libusb triggered error %d\n", r); | 
 | 467 |         } | 
 | 468 |         // skip rest | 
 | 469 |         found = -1; | 
 | 470 |     } | 
 | 471 |      | 
 | 472 |     if (found >= 0) { | 
 | 473 |         D("check_device(): Device matches Android interface\n"); | 
 | 474 |         // read the device's serial number | 
 | 475 |         memset(serial, 0, sizeof(serial)); | 
 | 476 |         uh.interface = found; | 
 | 477 |          | 
 | 478 |         r = libusb_claim_interface(uh.devh, uh.interface); | 
 | 479 |          | 
 | 480 |         if (r < 0) { | 
 | 481 |             D("check_device(): Failed to claim interface %d\n", | 
 | 482 |                 uh.interface); | 
 | 483 |  | 
 | 484 |             goto fail; | 
 | 485 |         } | 
 | 486 |  | 
 | 487 |         if (desc.iSerialNumber) { | 
 | 488 |             // reading serial | 
 | 489 |             uint16_t    buffer[128] = {0}; | 
 | 490 |             uint16_t    languages[128] = {0}; | 
 | 491 |             int languageCount = 0; | 
 | 492 |  | 
 | 493 |             memset(languages, 0, sizeof(languages)); | 
 | 494 |             r = libusb_control_transfer(uh.devh,  | 
 | 495 |                 LIBUSB_ENDPOINT_IN |  LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE, | 
 | 496 |                 LIBUSB_REQUEST_GET_DESCRIPTOR, LIBUSB_DT_STRING << 8, | 
 | 497 | 		0, (uint8_t *)languages, sizeof(languages), 0); | 
 | 498 |  | 
 | 499 |             if (r <= 0) { | 
 | 500 |                 D("check_device(): Failed to get languages count\n"); | 
 | 501 |                 goto fail; | 
 | 502 |             }  | 
 | 503 |              | 
 | 504 |             languageCount = (r - 2) / 2; | 
 | 505 |              | 
 | 506 |             for (i = 1; i <= languageCount; ++i) { | 
 | 507 |                 memset(buffer, 0, sizeof(buffer)); | 
 | 508 |  | 
 | 509 |                 r = libusb_control_transfer(uh.devh,  | 
 | 510 |                     LIBUSB_ENDPOINT_IN |  LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE, | 
 | 511 |                     LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_STRING << 8) | desc.iSerialNumber, | 
 | 512 | 		    languages[i], (uint8_t *)buffer, sizeof(buffer), 0); | 
 | 513 |              | 
 | 514 |                 if (r > 0) { /* converting serial */ | 
 | 515 |                     int j = 0; | 
 | 516 |                     r /= 2; | 
 | 517 |                  | 
 | 518 |                     for (j = 1; j < r; ++j) | 
 | 519 |                         serial[j - 1] = buffer[j]; | 
 | 520 |                  | 
 | 521 |                     serial[j - 1] = '\0'; | 
 | 522 |                     break; /* languagesCount cycle */ | 
 | 523 |                 } | 
 | 524 |             } | 
 | 525 |              | 
 | 526 |             if (register_device(&uh, serial) == 0) { | 
 | 527 |                 D("check_device(): Failed to register device\n"); | 
 | 528 |                 goto fail_interface; | 
 | 529 |             } | 
 | 530 |              | 
 | 531 |             libusb_ref_device(dev); | 
 | 532 |         } | 
 | 533 |     } | 
 | 534 |      | 
 | 535 |     return; | 
 | 536 |  | 
 | 537 | fail_interface: | 
 | 538 |     libusb_release_interface(uh.devh, uh.interface); | 
 | 539 |  | 
 | 540 | fail: | 
 | 541 |     libusb_close(uh.devh); | 
 | 542 |     uh.devh = NULL; | 
 | 543 | } | 
 | 544 |  | 
 | 545 | int | 
 | 546 | check_device_connected(struct usb_handle *uh) | 
 | 547 | { | 
 | 548 |     int r = libusb_kernel_driver_active(uh->devh, uh->interface); | 
 | 549 |      | 
 | 550 |     if (r == LIBUSB_ERROR_NO_DEVICE) | 
 | 551 |         return 0; | 
 | 552 |      | 
 | 553 |     if (r < 0) | 
 | 554 |         return -1; | 
 | 555 |      | 
 | 556 |     return 1; | 
 | 557 | } | 
 | 558 |  | 
 | 559 | void | 
 | 560 | kick_disconnected() | 
 | 561 | { | 
 | 562 |     struct usb_handle *usb= NULL; | 
 | 563 |      | 
 | 564 |     adb_mutex_lock(&usb_lock); | 
 | 565 |  | 
 | 566 |     for (usb = handle_list.next; usb != &handle_list; usb = usb->next) { | 
 | 567 |          | 
 | 568 |         if (check_device_connected(usb) == 0) { | 
 | 569 |             D("kick_disconnected(): Transport %p is not online anymore\n", | 
 | 570 |                 usb); | 
 | 571 |  | 
 | 572 |             usb_kick(usb); | 
 | 573 |         } | 
 | 574 |     } | 
 | 575 |      | 
 | 576 |     adb_mutex_unlock(&usb_lock); | 
 | 577 | } | 
 | 578 |  | 
 | 579 | void | 
 | 580 | scan_usb_devices() | 
 | 581 | { | 
 | 582 |     D("scan_usb_devices(): started\n"); | 
 | 583 |      | 
 | 584 |     libusb_device **devs= NULL; | 
 | 585 |     libusb_device *dev= NULL; | 
 | 586 |     ssize_t cnt = libusb_get_device_list(ctx, &devs); | 
 | 587 |  | 
 | 588 |     if (cnt < 0) { | 
 | 589 |         D("scan_usb_devices(): Failed to get device list (error: %d)\n", | 
 | 590 |             cnt); | 
 | 591 |  | 
 | 592 |         return; | 
 | 593 |     } | 
 | 594 |      | 
 | 595 |     int i = 0; | 
 | 596 |  | 
 | 597 |     while ((dev = devs[i++]) != NULL) { | 
 | 598 |         check_device(dev); | 
 | 599 |     } | 
 | 600 |  | 
 | 601 |     libusb_free_device_list(devs, 1); | 
 | 602 | } | 
 | 603 |  | 
 | 604 | void * | 
 | 605 | device_poll_thread(void* unused) | 
 | 606 | { | 
 | 607 |     D("device_poll_thread(): Created USB scan thread\n"); | 
 | 608 |      | 
 | 609 |     for (;;) { | 
 | 610 |         sleep(5); | 
 | 611 |         kick_disconnected(); | 
 | 612 |         scan_usb_devices(); | 
 | 613 |     } | 
 | 614 |  | 
 | 615 |     /* never reaching this point */ | 
 | 616 |     return (NULL); | 
 | 617 | } | 
 | 618 |  | 
 | 619 | static void | 
 | 620 | sigalrm_handler(int signo) | 
 | 621 | { | 
 | 622 |     /* nothing */ | 
 | 623 | } | 
 | 624 |  | 
 | 625 | void | 
 | 626 | usb_init() | 
 | 627 | { | 
 | 628 |     D("usb_init(): started\n"); | 
 | 629 |     adb_thread_t        tid; | 
 | 630 |     struct sigaction actions; | 
 | 631 |  | 
 | 632 |     int r = libusb_init(&ctx); | 
 | 633 |  | 
 | 634 |     if (r != LIBUSB_SUCCESS) { | 
 | 635 |         err(EX_IOERR, "Failed to init libusb\n"); | 
 | 636 |     } | 
 | 637 |  | 
 | 638 |     memset(&actions, 0, sizeof(actions)); | 
 | 639 |      | 
 | 640 |     sigemptyset(&actions.sa_mask); | 
 | 641 |      | 
 | 642 |     actions.sa_flags = 0; | 
 | 643 |     actions.sa_handler = sigalrm_handler; | 
 | 644 |      | 
 | 645 |     sigaction(SIGALRM, &actions, NULL); | 
 | 646 |  | 
 | 647 | 	/* initial device scan */ | 
 | 648 | 	scan_usb_devices(); | 
 | 649 | 	 | 
 | 650 | 	/* starting USB event polling thread */ | 
 | 651 |     if (adb_thread_create(&tid, device_poll_thread, NULL)) { | 
 | 652 |             err(EX_IOERR, "cannot create USB scan thread\n"); | 
 | 653 |     } | 
 | 654 |      | 
 | 655 |     D("usb_init(): finished\n"); | 
 | 656 | } | 
 | 657 |  |