init/property_service.cpp - android_system_core - Gitiles

 /*
  * Copyright (C) 2007 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include <inttypes.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <unistd.h>
 #include <string.h>
 #include <ctype.h>
 #include <fcntl.h>
 #include <stdarg.h>
 #include <dirent.h>
 #include <limits.h>
 #include <errno.h>
 #include <sys/poll.h>

 #include <memory>
 #include <vector>

 #define _REALLY_INCLUDE_SYS__SYSTEM_PROPERTIES_H_
 #include <sys/_system_properties.h>

 #include <sys/socket.h>
 #include <sys/un.h>
 #include <sys/select.h>
 #include <sys/types.h>
 #include <netinet/in.h>
 #include <sys/mman.h>

 #include <selinux/android.h>
 #include <selinux/selinux.h>
 #include <selinux/label.h>

 #include <android-base/file.h>
 #include <android-base/properties.h>
 #include <android-base/stringprintf.h>
 #include <android-base/strings.h>
 #include <fs_mgr.h>
 #include "bootimg.h"

 #include "property_service.h"
 #include "init.h"
 #include "util.h"
 #include "log.h"

 using android::base::StringPrintf;

 #define PERSISTENT_PROPERTY_DIR  "/data/property"
 #define RECOVERY_MOUNT_POINT "/recovery"

 static int persistent_properties_loaded = 0;

 static int property_set_fd = -1;

 void property_init() {
     if (__system_property_area_init()) {
         LOG(ERROR) << "Failed to initialize property area";
         exit(1);
     }
 }

 static bool check_mac_perms(const std::string& name, char* sctx, struct ucred* cr) {

     if (!sctx) {
       return false;
     }

     if (!sehandle_prop) {
       return false;
     }

     char* tctx = nullptr;
     if (selabel_lookup(sehandle_prop, &tctx, name.c_str(), 1) != 0) {
       return false;
     }

     property_audit_data audit_data;

     audit_data.name = name.c_str();
     audit_data.cr = cr;

     bool has_access = (selinux_check_access(sctx, tctx, "property_service", "set", &audit_data) == 0);

     freecon(tctx);
     return has_access;
 }

 static int check_control_mac_perms(const char *name, char *sctx, struct ucred *cr)
 {
     /*
      *  Create a name prefix out of ctl.<service name>
      *  The new prefix allows the use of the existing
      *  property service backend labeling while avoiding
      *  mislabels based on true property prefixes.
      */
     char ctl_name[PROP_VALUE_MAX+4];
     int ret = snprintf(ctl_name, sizeof(ctl_name), "ctl.%s", name);

     if (ret < 0 || (size_t) ret >= sizeof(ctl_name))
         return 0;

     return check_mac_perms(ctl_name, sctx, cr);
 }

 static void write_persistent_property(const char *name, const char *value)
 {
     char tempPath[PATH_MAX];
     char path[PATH_MAX];
     int fd;

     snprintf(tempPath, sizeof(tempPath), "%s/.temp.XXXXXX", PERSISTENT_PROPERTY_DIR);
     fd = mkstemp(tempPath);
     if (fd < 0) {
         PLOG(ERROR) << "Unable to write persistent property to temp file " << tempPath;
         return;
     }
     write(fd, value, strlen(value));
     fsync(fd);
     close(fd);

     snprintf(path, sizeof(path), "%s/%s", PERSISTENT_PROPERTY_DIR, name);
     if (rename(tempPath, path)) {
         PLOG(ERROR) << "Unable to rename persistent property file " << tempPath << " to " << path;
         unlink(tempPath);
     }
 }

 bool is_legal_property_name(const std::string& name) {
     size_t namelen = name.size();

     if (namelen < 1) return false;
     if (name[0] == '.') return false;
     if (name[namelen - 1] == '.') return false;

     /* Only allow alphanumeric, plus '.', '-', '@', ':', or '_' */
     /* Don't allow ".." to appear in a property name */
     for (size_t i = 0; i < namelen; i++) {
         if (name[i] == '.') {
             // i=0 is guaranteed to never have a dot. See above.
             if (name[i-1] == '.') return false;
             continue;
         }
         if (name[i] == '_' || name[i] == '-' || name[i] == '@' || name[i] == ':') continue;
         if (name[i] >= 'a' && name[i] <= 'z') continue;
         if (name[i] >= 'A' && name[i] <= 'Z') continue;
         if (name[i] >= '0' && name[i] <= '9') continue;
         return false;
     }

     return true;
 }

 uint32_t property_set(const std::string& name, const std::string& value) {
     size_t valuelen = value.size();

     if (!is_legal_property_name(name)) {
         LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: bad name";
         return PROP_ERROR_INVALID_NAME;
     }

     if (valuelen >= PROP_VALUE_MAX) {
         LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: "
                    << "value too long";
         return PROP_ERROR_INVALID_VALUE;
     }

     if (name == "selinux.restorecon_recursive" && valuelen > 0) {
         if (restorecon(value.c_str(), SELINUX_ANDROID_RESTORECON_RECURSE) != 0) {
             LOG(ERROR) << "Failed to restorecon_recursive " << value;
         }
     }

     prop_info* pi = (prop_info*) __system_property_find(name.c_str());
     if (pi != nullptr) {
         // ro.* properties are actually "write-once".
         if (android::base::StartsWith(name, "ro.")) {
             LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: "
                        << "property already set";
             return PROP_ERROR_READ_ONLY_PROPERTY;
         }

         __system_property_update(pi, value.c_str(), valuelen);
     } else {
         int rc = __system_property_add(name.c_str(), name.size(), value.c_str(), valuelen);
         if (rc < 0) {
             LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: "
                        << "__system_property_add failed";
             return PROP_ERROR_SET_FAILED;
         }
     }

     // Don't write properties to disk until after we have read all default
     // properties to prevent them from being overwritten by default values.
     if (persistent_properties_loaded && android::base::StartsWith(name, "persist.")) {
         write_persistent_property(name.c_str(), value.c_str());
     }
     property_changed(name, value);
     return PROP_SUCCESS;
 }

 class SocketConnection {
  public:
   SocketConnection(int socket, const struct ucred& cred)
       : socket_(socket), cred_(cred) {}

   ~SocketConnection() {
     close(socket_);
   }

   bool RecvUint32(uint32_t* value, uint32_t* timeout_ms) {
     return RecvFully(value, sizeof(*value), timeout_ms);
   }

   bool RecvChars(char* chars, size_t size, uint32_t* timeout_ms) {
     return RecvFully(chars, size, timeout_ms);
   }

   bool RecvString(std::string* value, uint32_t* timeout_ms) {
     uint32_t len = 0;
     if (!RecvUint32(&len, timeout_ms)) {
       return false;
     }

     if (len == 0) {
       *value = "";
       return true;
     }

     // http://b/35166374: don't allow init to make arbitrarily large allocations.
     if (len > 0xffff) {
       LOG(ERROR) << "sys_prop: RecvString asked to read huge string: " << len;
       errno = ENOMEM;
       return false;
     }

     std::vector<char> chars(len);
     if (!RecvChars(&chars[0], len, timeout_ms)) {
       return false;
     }

     *value = std::string(&chars[0], len);
     return true;
   }

   bool SendUint32(uint32_t value) {
     int result = TEMP_FAILURE_RETRY(send(socket_, &value, sizeof(value), 0));
     return result == sizeof(value);
   }

   int socket() {
     return socket_;
   }

   const struct ucred& cred() {
     return cred_;
   }

  private:
   bool PollIn(uint32_t* timeout_ms) {
     struct pollfd ufds[1];
     ufds[0].fd = socket_;
     ufds[0].events = POLLIN;
     ufds[0].revents = 0;
     while (*timeout_ms > 0) {
       Timer timer;
       int nr = poll(ufds, 1, *timeout_ms);
       uint64_t millis = timer.duration_ms();
       *timeout_ms = (millis > *timeout_ms) ? 0 : *timeout_ms - millis;

       if (nr > 0) {
         return true;
       }

       if (nr == 0) {
         // Timeout
         break;
       }

       if (nr < 0 && errno != EINTR) {
         PLOG(ERROR) << "sys_prop: error waiting for uid " << cred_.uid << " to send property message";
         return false;
       } else { // errno == EINTR
         // Timer rounds milliseconds down in case of EINTR we want it to be rounded up
         // to avoid slowing init down by causing EINTR with under millisecond timeout.
         if (*timeout_ms > 0) {
           --(*timeout_ms);
         }
       }
     }

     LOG(ERROR) << "sys_prop: timeout waiting for uid " << cred_.uid << " to send property message.";
     return false;
   }

   bool RecvFully(void* data_ptr, size_t size, uint32_t* timeout_ms) {
     size_t bytes_left = size;
     char* data = static_cast<char*>(data_ptr);
     while (*timeout_ms > 0 && bytes_left > 0) {
       if (!PollIn(timeout_ms)) {
         return false;
       }

       int result = TEMP_FAILURE_RETRY(recv(socket_, data, bytes_left, MSG_DONTWAIT));
       if (result <= 0) {
         return false;
       }

       bytes_left -= result;
       data += result;
     }

     return bytes_left == 0;
   }

   int socket_;
   struct ucred cred_;

   DISALLOW_IMPLICIT_CONSTRUCTORS(SocketConnection);
 };

 static void handle_property_set(SocketConnection& socket,
                                 const std::string& name,
                                 const std::string& value,
                                 bool legacy_protocol) {
   const char* cmd_name = legacy_protocol ? "PROP_MSG_SETPROP" : "PROP_MSG_SETPROP2";
   if (!is_legal_property_name(name)) {
     LOG(ERROR) << "sys_prop(" << cmd_name << "): illegal property name \"" << name << "\"";
     socket.SendUint32(PROP_ERROR_INVALID_NAME);
     return;
   }

   struct ucred cr = socket.cred();
   char* source_ctx = nullptr;
   getpeercon(socket.socket(), &source_ctx);

   if (android::base::StartsWith(name, "ctl.")) {
     if (check_control_mac_perms(value.c_str(), source_ctx, &cr)) {
       handle_control_message(name.c_str() + 4, value.c_str());
       if (!legacy_protocol) {
         socket.SendUint32(PROP_SUCCESS);
       }
     } else {
       LOG(ERROR) << "sys_prop(" << cmd_name << "): Unable to " << (name.c_str() + 4)
                  << " service ctl [" << value << "]"
                  << " uid:" << cr.uid
                  << " gid:" << cr.gid
                  << " pid:" << cr.pid;
       if (!legacy_protocol) {
         socket.SendUint32(PROP_ERROR_HANDLE_CONTROL_MESSAGE);
       }
     }
   } else {
     if (check_mac_perms(name, source_ctx, &cr)) {
       uint32_t result = property_set(name, value);
       if (!legacy_protocol) {
         socket.SendUint32(result);
       }
     } else {
       LOG(ERROR) << "sys_prop(" << cmd_name << "): permission denied uid:" << cr.uid << " name:" << name;
       if (!legacy_protocol) {
         socket.SendUint32(PROP_ERROR_PERMISSION_DENIED);
       }
     }
   }

   freecon(source_ctx);
 }

 static void handle_property_set_fd() {
     static constexpr uint32_t kDefaultSocketTimeout = 2000; /* ms */

     int s = accept4(property_set_fd, nullptr, nullptr, SOCK_CLOEXEC);
     if (s == -1) {
         return;
     }

     struct ucred cr;
     socklen_t cr_size = sizeof(cr);
     if (getsockopt(s, SOL_SOCKET, SO_PEERCRED, &cr, &cr_size) < 0) {
         close(s);
         PLOG(ERROR) << "sys_prop: unable to get SO_PEERCRED";
         return;
     }

     SocketConnection socket(s, cr);
     uint32_t timeout_ms = kDefaultSocketTimeout;

     uint32_t cmd = 0;
     if (!socket.RecvUint32(&cmd, &timeout_ms)) {
         PLOG(ERROR) << "sys_prop: error while reading command from the socket";
         socket.SendUint32(PROP_ERROR_READ_CMD);
         return;
     }

     switch (cmd) {
     case PROP_MSG_SETPROP: {
         char prop_name[PROP_NAME_MAX];
         char prop_value[PROP_VALUE_MAX];

         if (!socket.RecvChars(prop_name, PROP_NAME_MAX, &timeout_ms) ||
             !socket.RecvChars(prop_value, PROP_VALUE_MAX, &timeout_ms)) {
           PLOG(ERROR) << "sys_prop(PROP_MSG_SETPROP): error while reading name/value from the socket";
           return;
         }

         prop_name[PROP_NAME_MAX-1] = 0;
         prop_value[PROP_VALUE_MAX-1] = 0;

         handle_property_set(socket, prop_value, prop_value, true);
         break;
       }

     case PROP_MSG_SETPROP2: {
         std::string name;
         std::string value;
         if (!socket.RecvString(&name, &timeout_ms) ||
             !socket.RecvString(&value, &timeout_ms)) {
           PLOG(ERROR) << "sys_prop(PROP_MSG_SETPROP2): error while reading name/value from the socket";
           socket.SendUint32(PROP_ERROR_READ_DATA);
           return;
         }

         handle_property_set(socket, name, value, false);
         break;
       }

     default:
         LOG(ERROR) << "sys_prop: invalid command " << cmd;
         socket.SendUint32(PROP_ERROR_INVALID_CMD);
         break;
     }
 }

 static bool load_properties_from_file(const char *, const char *);

 /*
  * Filter is used to decide which properties to load: NULL loads all keys,
  * "ro.foo.*" is a prefix match, and "ro.foo.bar" is an exact match.
  */
 static void load_properties(char *data, const char *filter)
 {
     char *key, *value, *eol, *sol, *tmp, *fn;
     size_t flen = 0;

     if (filter) {
         flen = strlen(filter);
     }

     sol = data;
     while ((eol = strchr(sol, '\n'))) {
         key = sol;
         *eol++ = 0;
         sol = eol;

         while (isspace(*key)) key++;
         if (*key == '#') continue;

         tmp = eol - 2;
         while ((tmp > key) && isspace(*tmp)) *tmp-- = 0;

         if (!strncmp(key, "import ", 7) && flen == 0) {
             fn = key + 7;
             while (isspace(*fn)) fn++;

             key = strchr(fn, ' ');
             if (key) {
                 *key++ = 0;
                 while (isspace(*key)) key++;
             }

             load_properties_from_file(fn, key);

         } else {
             value = strchr(key, '=');
             if (!value) continue;
             *value++ = 0;

             tmp = value - 2;
             while ((tmp > key) && isspace(*tmp)) *tmp-- = 0;

             while (isspace(*value)) value++;

             if (flen > 0) {
                 if (filter[flen - 1] == '*') {
                     if (strncmp(key, filter, flen - 1)) continue;
                 } else {
                     if (strcmp(key, filter)) continue;
                 }
             }

             property_set(key, value);
         }
     }
 }

 // Filter is used to decide which properties to load: NULL loads all keys,
 // "ro.foo.*" is a prefix match, and "ro.foo.bar" is an exact match.
 static bool load_properties_from_file(const char* filename, const char* filter) {
     Timer t;
     std::string data;
     if (!read_file(filename, &data)) {
         PLOG(WARNING) << "Couldn't load properties from " << filename;
         return false;
     }
     data.push_back('\n');
     load_properties(&data[0], filter);
     LOG(VERBOSE) << "(Loading properties from " << filename << " took " << t << ".)";
     return true;
 }

 static void load_persistent_properties() {
     persistent_properties_loaded = 1;

     std::unique_ptr<DIR, int(*)(DIR*)> dir(opendir(PERSISTENT_PROPERTY_DIR), closedir);
     if (!dir) {
         PLOG(ERROR) << "Unable to open persistent property directory \""
                     << PERSISTENT_PROPERTY_DIR << "\"";
         return;
     }

     struct dirent* entry;
     while ((entry = readdir(dir.get())) != NULL) {
         if (strncmp("persist.", entry->d_name, strlen("persist."))) {
             continue;
         }
         if (entry->d_type != DT_REG) {
             continue;
         }

         // Open the file and read the property value.
         int fd = openat(dirfd(dir.get()), entry->d_name, O_RDONLY | O_NOFOLLOW);
         if (fd == -1) {
             PLOG(ERROR) << "Unable to open persistent property file \"" << entry->d_name << "\"";
             continue;
         }

         struct stat sb;
         if (fstat(fd, &sb) == -1) {
             PLOG(ERROR) << "fstat on property file \"" << entry->d_name << "\" failed";
             close(fd);
             continue;
         }

         // File must not be accessible to others, be owned by root/root, and
         // not be a hard link to any other file.
         if (((sb.st_mode & (S_IRWXG | S_IRWXO)) != 0) || sb.st_uid != 0 || sb.st_gid != 0 || sb.st_nlink != 1) {
             PLOG(ERROR) << "skipping insecure property file " << entry->d_name
                         << " (uid=" << sb.st_uid << " gid=" << sb.st_gid
                         << " nlink=" << sb.st_nlink << " mode=" << std::oct << sb.st_mode << ")";
             close(fd);
             continue;
         }

         char value[PROP_VALUE_MAX];
         int length = read(fd, value, sizeof(value) - 1);
         if (length >= 0) {
             value[length] = 0;
             property_set(entry->d_name, value);
         } else {
             PLOG(ERROR) << "Unable to read persistent property file " << entry->d_name;
         }
         close(fd);
     }
 }

 // persist.sys.usb.config values can't be combined on build-time when property
 // files are split into each partition.
 // So we need to apply the same rule of build/make/tools/post_process_props.py
 // on runtime.
 static void update_sys_usb_config() {
     bool is_debuggable = android::base::GetBoolProperty("ro.debuggable", false);
     std::string config = android::base::GetProperty("persist.sys.usb.config", "");
     if (config.empty()) {
         property_set("persist.sys.usb.config", is_debuggable ? "adb" : "none");
     } else if (is_debuggable && config.find("adb") == std::string::npos &&
                config.length() + 4 < PROP_VALUE_MAX) {
         config.append(",adb");
         property_set("persist.sys.usb.config", config);
     }
 }

 void property_load_boot_defaults() {
     if (!load_properties_from_file("/system/etc/prop.default", NULL)) {
         // Try recovery path
         if (!load_properties_from_file("/prop.default", NULL)) {
             // Try legacy path
             load_properties_from_file("/default.prop", NULL);
         }
     }
     load_properties_from_file("/odm/default.prop", NULL);
     load_properties_from_file("/vendor/default.prop", NULL);

     update_sys_usb_config();
 }

 static void load_override_properties() {
     if (ALLOW_LOCAL_PROP_OVERRIDE) {
         load_properties_from_file("/data/local.prop", NULL);
     }
 }

 /* When booting an encrypted system, /data is not mounted when the
  * property service is started, so any properties stored there are
  * not loaded.  Vold triggers init to load these properties once it
  * has mounted /data.
  */
 void load_persist_props(void) {
     load_override_properties();
     /* Read persistent properties after all default values have been loaded. */
     load_persistent_properties();
     property_set("ro.persistent_properties.ready", "true");
 }

 void load_recovery_id_prop() {
     std::unique_ptr<fstab, decltype(&fs_mgr_free_fstab)> fstab(fs_mgr_read_fstab_default(),
                                                                fs_mgr_free_fstab);
     if (!fstab) {
         PLOG(ERROR) << "unable to read default fstab";
         return;
     }

     fstab_rec* rec = fs_mgr_get_entry_for_mount_point(fstab.get(), RECOVERY_MOUNT_POINT);
     if (rec == NULL) {
         LOG(ERROR) << "/recovery not specified in fstab";
         return;
     }

     int fd = open(rec->blk_device, O_RDONLY);
     if (fd == -1) {
         PLOG(ERROR) << "error opening block device " << rec->blk_device;
         return;
     }

     boot_img_hdr hdr;
     if (android::base::ReadFully(fd, &hdr, sizeof(hdr))) {
         std::string hex = bytes_to_hex(reinterpret_cast<uint8_t*>(hdr.id), sizeof(hdr.id));
         property_set("ro.recovery_id", hex.c_str());
     } else {
         PLOG(ERROR) << "error reading /recovery";
     }

     close(fd);
 }

 void load_system_props() {
     load_properties_from_file("/system/build.prop", NULL);
     load_properties_from_file("/odm/build.prop", NULL);
     load_properties_from_file("/vendor/build.prop", NULL);
     load_properties_from_file("/factory/factory.prop", "ro.*");
     load_recovery_id_prop();
 }

 void start_property_service() {
     property_set("ro.property_service.version", "2");

     property_set_fd = create_socket(PROP_SERVICE_NAME, SOCK_STREAM | SOCK_CLOEXEC | SOCK_NONBLOCK,
                                     0666, 0, 0, NULL);
     if (property_set_fd == -1) {
         PLOG(ERROR) << "start_property_service socket creation failed";
         exit(1);
     }

     listen(property_set_fd, 8);

     register_epoll_handler(property_set_fd, handle_property_set_fd);
 }
	/*
	* Copyright (C) 2007 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include <inttypes.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <string.h>
	#include <ctype.h>
	#include <fcntl.h>
	#include <stdarg.h>
	#include <dirent.h>
	#include <limits.h>
	#include <errno.h>
	#include <sys/poll.h>

	#include <memory>
	#include <vector>

	#define _REALLY_INCLUDE_SYS__SYSTEM_PROPERTIES_H_
	#include <sys/_system_properties.h>

	#include <sys/socket.h>
	#include <sys/un.h>
	#include <sys/select.h>
	#include <sys/types.h>
	#include <netinet/in.h>
	#include <sys/mman.h>

	#include <selinux/android.h>
	#include <selinux/selinux.h>
	#include <selinux/label.h>

	#include <android-base/file.h>
	#include <android-base/properties.h>
	#include <android-base/stringprintf.h>
	#include <android-base/strings.h>
	#include <fs_mgr.h>
	#include "bootimg.h"

	#include "property_service.h"
	#include "init.h"
	#include "util.h"
	#include "log.h"

	using android::base::StringPrintf;

	#define PERSISTENT_PROPERTY_DIR "/data/property"
	#define RECOVERY_MOUNT_POINT "/recovery"

	static int persistent_properties_loaded = 0;

	static int property_set_fd = -1;

	void property_init() {
	if (__system_property_area_init()) {
	LOG(ERROR) << "Failed to initialize property area";
	exit(1);
	}
	}

	static bool check_mac_perms(const std::string& name, char* sctx, struct ucred* cr) {

	if (!sctx) {
	return false;
	}

	if (!sehandle_prop) {
	return false;
	}

	char* tctx = nullptr;
	if (selabel_lookup(sehandle_prop, &tctx, name.c_str(), 1) != 0) {
	return false;
	}

	property_audit_data audit_data;

	audit_data.name = name.c_str();
	audit_data.cr = cr;

	bool has_access = (selinux_check_access(sctx, tctx, "property_service", "set", &audit_data) == 0);

	freecon(tctx);
	return has_access;
	}

	static int check_control_mac_perms(const char name, char sctx, struct ucred *cr)
	{
	/*
	* Create a name prefix out of ctl.<service name>
	* The new prefix allows the use of the existing
	* property service backend labeling while avoiding
	* mislabels based on true property prefixes.
	*/
	char ctl_name[PROP_VALUE_MAX+4];
	int ret = snprintf(ctl_name, sizeof(ctl_name), "ctl.%s", name);

	if (ret < 0 \|\| (size_t) ret >= sizeof(ctl_name))
	return 0;

	return check_mac_perms(ctl_name, sctx, cr);
	}

	static void write_persistent_property(const char name, const char value)
	{
	char tempPath[PATH_MAX];
	char path[PATH_MAX];
	int fd;

	snprintf(tempPath, sizeof(tempPath), "%s/.temp.XXXXXX", PERSISTENT_PROPERTY_DIR);
	fd = mkstemp(tempPath);
	if (fd < 0) {
	PLOG(ERROR) << "Unable to write persistent property to temp file " << tempPath;
	return;
	}
	write(fd, value, strlen(value));
	fsync(fd);
	close(fd);

	snprintf(path, sizeof(path), "%s/%s", PERSISTENT_PROPERTY_DIR, name);
	if (rename(tempPath, path)) {
	PLOG(ERROR) << "Unable to rename persistent property file " << tempPath << " to " << path;
	unlink(tempPath);
	}
	}

	bool is_legal_property_name(const std::string& name) {
	size_t namelen = name.size();

	if (namelen < 1) return false;
	if (name[0] == '.') return false;
	if (name[namelen - 1] == '.') return false;

	/* Only allow alphanumeric, plus '.', '-', '@', ':', or '_' */
	/* Don't allow ".." to appear in a property name */
	for (size_t i = 0; i < namelen; i++) {
	if (name[i] == '.') {
	// i=0 is guaranteed to never have a dot. See above.
	if (name[i-1] == '.') return false;
	continue;
	}
	if (name[i] == '_' \|\| name[i] == '-' \|\| name[i] == '@' \|\| name[i] == ':') continue;
	if (name[i] >= 'a' && name[i] <= 'z') continue;
	if (name[i] >= 'A' && name[i] <= 'Z') continue;
	if (name[i] >= '0' && name[i] <= '9') continue;
	return false;
	}

	return true;
	}

	uint32_t property_set(const std::string& name, const std::string& value) {
	size_t valuelen = value.size();

	if (!is_legal_property_name(name)) {
	LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: bad name";
	return PROP_ERROR_INVALID_NAME;
	}

	if (valuelen >= PROP_VALUE_MAX) {
	LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: "
	<< "value too long";
	return PROP_ERROR_INVALID_VALUE;
	}

	if (name == "selinux.restorecon_recursive" && valuelen > 0) {
	if (restorecon(value.c_str(), SELINUX_ANDROID_RESTORECON_RECURSE) != 0) {
	LOG(ERROR) << "Failed to restorecon_recursive " << value;
	}
	}

	prop_info* pi = (prop_info*) __system_property_find(name.c_str());
	if (pi != nullptr) {
	// ro.* properties are actually "write-once".
	if (android::base::StartsWith(name, "ro.")) {
	LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: "
	<< "property already set";
	return PROP_ERROR_READ_ONLY_PROPERTY;
	}

	__system_property_update(pi, value.c_str(), valuelen);
	} else {
	int rc = __system_property_add(name.c_str(), name.size(), value.c_str(), valuelen);
	if (rc < 0) {
	LOG(ERROR) << "property_set(\"" << name << "\", \"" << value << "\") failed: "
	<< "__system_property_add failed";
	return PROP_ERROR_SET_FAILED;
	}
	}

	// Don't write properties to disk until after we have read all default
	// properties to prevent them from being overwritten by default values.
	if (persistent_properties_loaded && android::base::StartsWith(name, "persist.")) {
	write_persistent_property(name.c_str(), value.c_str());
	}
	property_changed(name, value);
	return PROP_SUCCESS;
	}

	class SocketConnection {
	public:
	SocketConnection(int socket, const struct ucred& cred)
	: socket_(socket), cred_(cred) {}

	~SocketConnection() {
	close(socket_);
	}

	bool RecvUint32(uint32_t* value, uint32_t* timeout_ms) {
	return RecvFully(value, sizeof(*value), timeout_ms);
	}

	bool RecvChars(char* chars, size_t size, uint32_t* timeout_ms) {
	return RecvFully(chars, size, timeout_ms);
	}

	bool RecvString(std::string* value, uint32_t* timeout_ms) {
	uint32_t len = 0;
	if (!RecvUint32(&len, timeout_ms)) {
	return false;
	}

	if (len == 0) {
	*value = "";
	return true;
	}

	// http://b/35166374: don't allow init to make arbitrarily large allocations.
	if (len > 0xffff) {
	LOG(ERROR) << "sys_prop: RecvString asked to read huge string: " << len;
	errno = ENOMEM;
	return false;
	}

	std::vector<char> chars(len);
	if (!RecvChars(&chars[0], len, timeout_ms)) {
	return false;
	}

	*value = std::string(&chars[0], len);
	return true;
	}

	bool SendUint32(uint32_t value) {
	int result = TEMP_FAILURE_RETRY(send(socket_, &value, sizeof(value), 0));
	return result == sizeof(value);
	}

	int socket() {
	return socket_;
	}

	const struct ucred& cred() {
	return cred_;
	}

	private:
	bool PollIn(uint32_t* timeout_ms) {
	struct pollfd ufds[1];
	ufds[0].fd = socket_;
	ufds[0].events = POLLIN;
	ufds[0].revents = 0;
	while (*timeout_ms > 0) {
	Timer timer;
	int nr = poll(ufds, 1, *timeout_ms);
	uint64_t millis = timer.duration_ms();
	timeout_ms = (millis > timeout_ms) ? 0 : *timeout_ms - millis;

	if (nr > 0) {
	return true;
	}

	if (nr == 0) {
	// Timeout
	break;
	}

	if (nr < 0 && errno != EINTR) {
	PLOG(ERROR) << "sys_prop: error waiting for uid " << cred_.uid << " to send property message";
	return false;
	} else { // errno == EINTR
	// Timer rounds milliseconds down in case of EINTR we want it to be rounded up
	// to avoid slowing init down by causing EINTR with under millisecond timeout.
	if (*timeout_ms > 0) {
	--(*timeout_ms);
	}
	}
	}

	LOG(ERROR) << "sys_prop: timeout waiting for uid " << cred_.uid << " to send property message.";
	return false;
	}

	bool RecvFully(void* data_ptr, size_t size, uint32_t* timeout_ms) {
	size_t bytes_left = size;
	char* data = static_cast<char*>(data_ptr);
	while (*timeout_ms > 0 && bytes_left > 0) {
	if (!PollIn(timeout_ms)) {
	return false;
	}

	int result = TEMP_FAILURE_RETRY(recv(socket_, data, bytes_left, MSG_DONTWAIT));
	if (result <= 0) {
	return false;
	}

	bytes_left -= result;
	data += result;
	}

	return bytes_left == 0;
	}

	int socket_;
	struct ucred cred_;

	DISALLOW_IMPLICIT_CONSTRUCTORS(SocketConnection);
	};

	static void handle_property_set(SocketConnection& socket,
	const std::string& name,
	const std::string& value,
	bool legacy_protocol) {
	const char* cmd_name = legacy_protocol ? "PROP_MSG_SETPROP" : "PROP_MSG_SETPROP2";
	if (!is_legal_property_name(name)) {
	LOG(ERROR) << "sys_prop(" << cmd_name << "): illegal property name \"" << name << "\"";
	socket.SendUint32(PROP_ERROR_INVALID_NAME);
	return;
	}

	struct ucred cr = socket.cred();
	char* source_ctx = nullptr;
	getpeercon(socket.socket(), &source_ctx);

	if (android::base::StartsWith(name, "ctl.")) {
	if (check_control_mac_perms(value.c_str(), source_ctx, &cr)) {
	handle_control_message(name.c_str() + 4, value.c_str());
	if (!legacy_protocol) {
	socket.SendUint32(PROP_SUCCESS);
	}
	} else {
	LOG(ERROR) << "sys_prop(" << cmd_name << "): Unable to " << (name.c_str() + 4)
	<< " service ctl [" << value << "]"
	<< " uid:" << cr.uid
	<< " gid:" << cr.gid
	<< " pid:" << cr.pid;
	if (!legacy_protocol) {
	socket.SendUint32(PROP_ERROR_HANDLE_CONTROL_MESSAGE);
	}
	}
	} else {
	if (check_mac_perms(name, source_ctx, &cr)) {
	uint32_t result = property_set(name, value);
	if (!legacy_protocol) {
	socket.SendUint32(result);
	}
	} else {
	LOG(ERROR) << "sys_prop(" << cmd_name << "): permission denied uid:" << cr.uid << " name:" << name;
	if (!legacy_protocol) {
	socket.SendUint32(PROP_ERROR_PERMISSION_DENIED);
	}
	}
	}

	freecon(source_ctx);
	}

	static void handle_property_set_fd() {
	static constexpr uint32_t kDefaultSocketTimeout = 2000; /* ms */

	int s = accept4(property_set_fd, nullptr, nullptr, SOCK_CLOEXEC);
	if (s == -1) {
	return;
	}

	struct ucred cr;
	socklen_t cr_size = sizeof(cr);
	if (getsockopt(s, SOL_SOCKET, SO_PEERCRED, &cr, &cr_size) < 0) {
	close(s);
	PLOG(ERROR) << "sys_prop: unable to get SO_PEERCRED";
	return;
	}

	SocketConnection socket(s, cr);
	uint32_t timeout_ms = kDefaultSocketTimeout;

	uint32_t cmd = 0;
	if (!socket.RecvUint32(&cmd, &timeout_ms)) {
	PLOG(ERROR) << "sys_prop: error while reading command from the socket";
	socket.SendUint32(PROP_ERROR_READ_CMD);
	return;
	}

	switch (cmd) {
	case PROP_MSG_SETPROP: {
	char prop_name[PROP_NAME_MAX];
	char prop_value[PROP_VALUE_MAX];

	if (!socket.RecvChars(prop_name, PROP_NAME_MAX, &timeout_ms) \|\|
	!socket.RecvChars(prop_value, PROP_VALUE_MAX, &timeout_ms)) {
	PLOG(ERROR) << "sys_prop(PROP_MSG_SETPROP): error while reading name/value from the socket";
	return;
	}

	prop_name[PROP_NAME_MAX-1] = 0;
	prop_value[PROP_VALUE_MAX-1] = 0;

	handle_property_set(socket, prop_value, prop_value, true);
	break;
	}

	case PROP_MSG_SETPROP2: {
	std::string name;
	std::string value;
	if (!socket.RecvString(&name, &timeout_ms) \|\|
	!socket.RecvString(&value, &timeout_ms)) {
	PLOG(ERROR) << "sys_prop(PROP_MSG_SETPROP2): error while reading name/value from the socket";
	socket.SendUint32(PROP_ERROR_READ_DATA);
	return;
	}

	handle_property_set(socket, name, value, false);
	break;
	}

	default:
	LOG(ERROR) << "sys_prop: invalid command " << cmd;
	socket.SendUint32(PROP_ERROR_INVALID_CMD);
	break;
	}
	}

	static bool load_properties_from_file(const char , const char );

	/*
	* Filter is used to decide which properties to load: NULL loads all keys,
	* "ro.foo.*" is a prefix match, and "ro.foo.bar" is an exact match.
	*/
	static void load_properties(char data, const char filter)
	{
	char key, value, eol, sol, tmp, fn;
	size_t flen = 0;

	if (filter) {
	flen = strlen(filter);
	}

	sol = data;
	while ((eol = strchr(sol, '\n'))) {
	key = sol;
	*eol++ = 0;
	sol = eol;

	while (isspace(*key)) key++;
	if (*key == '#') continue;

	tmp = eol - 2;
	while ((tmp > key) && isspace(tmp)) tmp-- = 0;

	if (!strncmp(key, "import ", 7) && flen == 0) {
	fn = key + 7;
	while (isspace(*fn)) fn++;

	key = strchr(fn, ' ');
	if (key) {
	*key++ = 0;
	while (isspace(*key)) key++;
	}

	load_properties_from_file(fn, key);

	} else {
	value = strchr(key, '=');
	if (!value) continue;
	*value++ = 0;

	tmp = value - 2;
	while ((tmp > key) && isspace(tmp)) tmp-- = 0;

	while (isspace(*value)) value++;

	if (flen > 0) {
	if (filter[flen - 1] == '*') {
	if (strncmp(key, filter, flen - 1)) continue;
	} else {
	if (strcmp(key, filter)) continue;
	}
	}

	property_set(key, value);
	}
	}
	}

	// Filter is used to decide which properties to load: NULL loads all keys,
	// "ro.foo.*" is a prefix match, and "ro.foo.bar" is an exact match.
	static bool load_properties_from_file(const char* filename, const char* filter) {
	Timer t;
	std::string data;
	if (!read_file(filename, &data)) {
	PLOG(WARNING) << "Couldn't load properties from " << filename;
	return false;
	}
	data.push_back('\n');
	load_properties(&data[0], filter);
	LOG(VERBOSE) << "(Loading properties from " << filename << " took " << t << ".)";
	return true;
	}

	static void load_persistent_properties() {
	persistent_properties_loaded = 1;

	std::unique_ptr<DIR, int()(DIR)> dir(opendir(PERSISTENT_PROPERTY_DIR), closedir);
	if (!dir) {
	PLOG(ERROR) << "Unable to open persistent property directory \""
	<< PERSISTENT_PROPERTY_DIR << "\"";
	return;
	}

	struct dirent* entry;
	while ((entry = readdir(dir.get())) != NULL) {
	if (strncmp("persist.", entry->d_name, strlen("persist."))) {
	continue;
	}
	if (entry->d_type != DT_REG) {
	continue;
	}

	// Open the file and read the property value.
	int fd = openat(dirfd(dir.get()), entry->d_name, O_RDONLY \| O_NOFOLLOW);
	if (fd == -1) {
	PLOG(ERROR) << "Unable to open persistent property file \"" << entry->d_name << "\"";
	continue;
	}

	struct stat sb;
	if (fstat(fd, &sb) == -1) {
	PLOG(ERROR) << "fstat on property file \"" << entry->d_name << "\" failed";
	close(fd);
	continue;
	}

	// File must not be accessible to others, be owned by root/root, and
	// not be a hard link to any other file.
	if (((sb.st_mode & (S_IRWXG \| S_IRWXO)) != 0) \|\| sb.st_uid != 0 \|\| sb.st_gid != 0 \|\| sb.st_nlink != 1) {
	PLOG(ERROR) << "skipping insecure property file " << entry->d_name
	<< " (uid=" << sb.st_uid << " gid=" << sb.st_gid
	<< " nlink=" << sb.st_nlink << " mode=" << std::oct << sb.st_mode << ")";
	close(fd);
	continue;
	}

	char value[PROP_VALUE_MAX];
	int length = read(fd, value, sizeof(value) - 1);
	if (length >= 0) {
	value[length] = 0;
	property_set(entry->d_name, value);
	} else {
	PLOG(ERROR) << "Unable to read persistent property file " << entry->d_name;
	}
	close(fd);
	}
	}

	// persist.sys.usb.config values can't be combined on build-time when property
	// files are split into each partition.
	// So we need to apply the same rule of build/make/tools/post_process_props.py
	// on runtime.
	static void update_sys_usb_config() {
	bool is_debuggable = android::base::GetBoolProperty("ro.debuggable", false);
	std::string config = android::base::GetProperty("persist.sys.usb.config", "");
	if (config.empty()) {
	property_set("persist.sys.usb.config", is_debuggable ? "adb" : "none");
	} else if (is_debuggable && config.find("adb") == std::string::npos &&
	config.length() + 4 < PROP_VALUE_MAX) {
	config.append(",adb");
	property_set("persist.sys.usb.config", config);
	}
	}

	void property_load_boot_defaults() {
	if (!load_properties_from_file("/system/etc/prop.default", NULL)) {
	// Try recovery path
	if (!load_properties_from_file("/prop.default", NULL)) {
	// Try legacy path
	load_properties_from_file("/default.prop", NULL);
	}
	}
	load_properties_from_file("/odm/default.prop", NULL);
	load_properties_from_file("/vendor/default.prop", NULL);

	update_sys_usb_config();
	}

	static void load_override_properties() {
	if (ALLOW_LOCAL_PROP_OVERRIDE) {
	load_properties_from_file("/data/local.prop", NULL);
	}
	}

	/* When booting an encrypted system, /data is not mounted when the
	* property service is started, so any properties stored there are
	* not loaded. Vold triggers init to load these properties once it
	* has mounted /data.
	*/
	void load_persist_props(void) {
	load_override_properties();
	/* Read persistent properties after all default values have been loaded. */
	load_persistent_properties();
	property_set("ro.persistent_properties.ready", "true");
	}

	void load_recovery_id_prop() {
	std::unique_ptr<fstab, decltype(&fs_mgr_free_fstab)> fstab(fs_mgr_read_fstab_default(),
	fs_mgr_free_fstab);
	if (!fstab) {
	PLOG(ERROR) << "unable to read default fstab";
	return;
	}

	fstab_rec* rec = fs_mgr_get_entry_for_mount_point(fstab.get(), RECOVERY_MOUNT_POINT);
	if (rec == NULL) {
	LOG(ERROR) << "/recovery not specified in fstab";
	return;
	}

	int fd = open(rec->blk_device, O_RDONLY);
	if (fd == -1) {
	PLOG(ERROR) << "error opening block device " << rec->blk_device;
	return;
	}

	boot_img_hdr hdr;
	if (android::base::ReadFully(fd, &hdr, sizeof(hdr))) {
	std::string hex = bytes_to_hex(reinterpret_cast<uint8_t*>(hdr.id), sizeof(hdr.id));
	property_set("ro.recovery_id", hex.c_str());
	} else {
	PLOG(ERROR) << "error reading /recovery";
	}

	close(fd);
	}

	void load_system_props() {
	load_properties_from_file("/system/build.prop", NULL);
	load_properties_from_file("/odm/build.prop", NULL);
	load_properties_from_file("/vendor/build.prop", NULL);
	load_properties_from_file("/factory/factory.prop", "ro.*");
	load_recovery_id_prop();
	}

	void start_property_service() {
	property_set("ro.property_service.version", "2");

	property_set_fd = create_socket(PROP_SERVICE_NAME, SOCK_STREAM \| SOCK_CLOEXEC \| SOCK_NONBLOCK,
	0666, 0, 0, NULL);
	if (property_set_fd == -1) {
	PLOG(ERROR) << "start_property_service socket creation failed";
	exit(1);
	}

	listen(property_set_fd, 8);

	register_epoll_handler(property_set_fd, handle_property_set_fd);
	}