|  | /* | 
|  | * Copyright (C) 2008 The Android Open Source Project | 
|  | * | 
|  | * Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | * you may not use this file except in compliance with the License. | 
|  | * You may obtain a copy of the License at | 
|  | * | 
|  | *      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | * | 
|  | * Unless required by applicable law or agreed to in writing, software | 
|  | * distributed under the License is distributed on an "AS IS" BASIS, | 
|  | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | * See the License for the specific language governing permissions and | 
|  | * limitations under the License. | 
|  | */ | 
|  |  | 
|  | #include "util.h" | 
|  |  | 
|  | #include <ctype.h> | 
|  | #include <errno.h> | 
|  | #include <fcntl.h> | 
|  | #include <pwd.h> | 
|  | #include <signal.h> | 
|  | #include <stdarg.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <sys/socket.h> | 
|  | #include <sys/un.h> | 
|  | #include <time.h> | 
|  | #include <unistd.h> | 
|  |  | 
|  | #include <map> | 
|  | #include <thread> | 
|  |  | 
|  | #include <android-base/file.h> | 
|  | #include <android-base/logging.h> | 
|  | #include <android-base/properties.h> | 
|  | #include <android-base/scopeguard.h> | 
|  | #include <android-base/strings.h> | 
|  | #include <android-base/unique_fd.h> | 
|  | #include <cutils/sockets.h> | 
|  | #include <selinux/android.h> | 
|  |  | 
|  | #ifdef INIT_FULL_SOURCES | 
|  | #include <android/api-level.h> | 
|  | #include <sys/system_properties.h> | 
|  |  | 
|  | #include "reboot_utils.h" | 
|  | #include "selabel.h" | 
|  | #include "selinux.h" | 
|  | #else | 
|  | #include "host_init_stubs.h" | 
|  | #endif | 
|  |  | 
|  | using android::base::boot_clock; | 
|  | using android::base::StartsWith; | 
|  | using namespace std::literals::string_literals; | 
|  |  | 
|  | namespace android { | 
|  | namespace init { | 
|  |  | 
|  | const std::string kDefaultAndroidDtDir("/proc/device-tree/firmware/android/"); | 
|  |  | 
|  | const std::string kDataDirPrefix("/data/"); | 
|  |  | 
|  | void (*trigger_shutdown)(const std::string& command) = nullptr; | 
|  |  | 
|  | // DecodeUid() - decodes and returns the given string, which can be either the | 
|  | // numeric or name representation, into the integer uid or gid. | 
|  | Result<uid_t> DecodeUid(const std::string& name) { | 
|  | if (isalpha(name[0])) { | 
|  | passwd* pwd = getpwnam(name.c_str()); | 
|  | if (!pwd) return ErrnoError() << "getpwnam failed"; | 
|  |  | 
|  | return pwd->pw_uid; | 
|  | } | 
|  |  | 
|  | errno = 0; | 
|  | uid_t result = static_cast<uid_t>(strtoul(name.c_str(), 0, 0)); | 
|  | if (errno) return ErrnoError() << "strtoul failed"; | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * CreateSocket - creates a Unix domain socket in ANDROID_SOCKET_DIR | 
|  | * ("/dev/socket") as dictated in init.rc. This socket is inherited by the | 
|  | * daemon. We communicate the file descriptor's value via the environment | 
|  | * variable ANDROID_SOCKET_ENV_PREFIX<name> ("ANDROID_SOCKET_foo"). | 
|  | */ | 
|  | Result<int> CreateSocket(const std::string& name, int type, bool passcred, bool should_listen, | 
|  | mode_t perm, uid_t uid, gid_t gid, const std::string& socketcon) { | 
|  | if (!socketcon.empty()) { | 
|  | if (setsockcreatecon(socketcon.c_str()) == -1) { | 
|  | return ErrnoError() << "setsockcreatecon(\"" << socketcon << "\") failed"; | 
|  | } | 
|  | } | 
|  |  | 
|  | android::base::unique_fd fd(socket(PF_UNIX, type, 0)); | 
|  | if (fd < 0) { | 
|  | return ErrnoError() << "Failed to open socket '" << name << "'"; | 
|  | } | 
|  |  | 
|  | if (!socketcon.empty()) setsockcreatecon(nullptr); | 
|  |  | 
|  | struct sockaddr_un addr; | 
|  | memset(&addr, 0 , sizeof(addr)); | 
|  | addr.sun_family = AF_UNIX; | 
|  | snprintf(addr.sun_path, sizeof(addr.sun_path), ANDROID_SOCKET_DIR "/%s", name.c_str()); | 
|  |  | 
|  | if ((unlink(addr.sun_path) != 0) && (errno != ENOENT)) { | 
|  | return ErrnoError() << "Failed to unlink old socket '" << name << "'"; | 
|  | } | 
|  |  | 
|  | std::string secontext; | 
|  | if (SelabelLookupFileContext(addr.sun_path, S_IFSOCK, &secontext) && !secontext.empty()) { | 
|  | setfscreatecon(secontext.c_str()); | 
|  | } | 
|  |  | 
|  | if (passcred) { | 
|  | int on = 1; | 
|  | if (setsockopt(fd, SOL_SOCKET, SO_PASSCRED, &on, sizeof(on))) { | 
|  | return ErrnoError() << "Failed to set SO_PASSCRED '" << name << "'"; | 
|  | } | 
|  | } | 
|  |  | 
|  | int ret = bind(fd, (struct sockaddr *) &addr, sizeof (addr)); | 
|  | int savederrno = errno; | 
|  |  | 
|  | if (!secontext.empty()) { | 
|  | setfscreatecon(nullptr); | 
|  | } | 
|  |  | 
|  | auto guard = android::base::make_scope_guard([&addr] { unlink(addr.sun_path); }); | 
|  |  | 
|  | if (ret) { | 
|  | errno = savederrno; | 
|  | return ErrnoError() << "Failed to bind socket '" << name << "'"; | 
|  | } | 
|  |  | 
|  | if (lchown(addr.sun_path, uid, gid)) { | 
|  | return ErrnoError() << "Failed to lchown socket '" << addr.sun_path << "'"; | 
|  | } | 
|  | if (fchmodat(AT_FDCWD, addr.sun_path, perm, AT_SYMLINK_NOFOLLOW)) { | 
|  | return ErrnoError() << "Failed to fchmodat socket '" << addr.sun_path << "'"; | 
|  | } | 
|  | if (should_listen && listen(fd, /* use OS maximum */ 1 << 30)) { | 
|  | return ErrnoError() << "Failed to listen on socket '" << addr.sun_path << "'"; | 
|  | } | 
|  |  | 
|  | LOG(INFO) << "Created socket '" << addr.sun_path << "'" | 
|  | << ", mode " << std::oct << perm << std::dec | 
|  | << ", user " << uid | 
|  | << ", group " << gid; | 
|  |  | 
|  | guard.Disable(); | 
|  | return fd.release(); | 
|  | } | 
|  |  | 
|  | Result<std::string> ReadFile(const std::string& path) { | 
|  | android::base::unique_fd fd( | 
|  | TEMP_FAILURE_RETRY(open(path.c_str(), O_RDONLY | O_NOFOLLOW | O_CLOEXEC))); | 
|  | if (fd == -1) { | 
|  | return ErrnoError() << "open() failed"; | 
|  | } | 
|  |  | 
|  | // For security reasons, disallow world-writable | 
|  | // or group-writable files. | 
|  | struct stat sb; | 
|  | if (fstat(fd, &sb) == -1) { | 
|  | return ErrnoError() << "fstat failed()"; | 
|  | } | 
|  | if ((sb.st_mode & (S_IWGRP | S_IWOTH)) != 0) { | 
|  | return Error() << "Skipping insecure file"; | 
|  | } | 
|  |  | 
|  | std::string content; | 
|  | if (!android::base::ReadFdToString(fd, &content)) { | 
|  | return ErrnoError() << "Unable to read file contents"; | 
|  | } | 
|  | return content; | 
|  | } | 
|  |  | 
|  | static int OpenFile(const std::string& path, int flags, mode_t mode) { | 
|  | std::string secontext; | 
|  | if (SelabelLookupFileContext(path, mode, &secontext) && !secontext.empty()) { | 
|  | setfscreatecon(secontext.c_str()); | 
|  | } | 
|  |  | 
|  | int rc = open(path.c_str(), flags, mode); | 
|  |  | 
|  | if (!secontext.empty()) { | 
|  | int save_errno = errno; | 
|  | setfscreatecon(nullptr); | 
|  | errno = save_errno; | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | Result<void> WriteFile(const std::string& path, const std::string& content) { | 
|  | android::base::unique_fd fd(TEMP_FAILURE_RETRY( | 
|  | OpenFile(path, O_WRONLY | O_CREAT | O_NOFOLLOW | O_TRUNC | O_CLOEXEC, 0600))); | 
|  | if (fd == -1) { | 
|  | return ErrnoError() << "open() failed"; | 
|  | } | 
|  | if (!android::base::WriteStringToFd(content, fd)) { | 
|  | return ErrnoError() << "Unable to write file contents"; | 
|  | } | 
|  | return {}; | 
|  | } | 
|  |  | 
|  | bool mkdir_recursive(const std::string& path, mode_t mode) { | 
|  | std::string::size_type slash = 0; | 
|  | while ((slash = path.find('/', slash + 1)) != std::string::npos) { | 
|  | auto directory = path.substr(0, slash); | 
|  | struct stat info; | 
|  | if (stat(directory.c_str(), &info) != 0) { | 
|  | auto ret = make_dir(directory, mode); | 
|  | if (!ret && errno != EEXIST) return false; | 
|  | } | 
|  | } | 
|  | auto ret = make_dir(path, mode); | 
|  | if (!ret && errno != EEXIST) return false; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | int wait_for_file(const char* filename, std::chrono::nanoseconds timeout) { | 
|  | android::base::Timer t; | 
|  | while (t.duration() < timeout) { | 
|  | struct stat sb; | 
|  | if (stat(filename, &sb) != -1) { | 
|  | LOG(INFO) << "wait for '" << filename << "' took " << t; | 
|  | return 0; | 
|  | } | 
|  | std::this_thread::sleep_for(10ms); | 
|  | } | 
|  | LOG(WARNING) << "wait for '" << filename << "' timed out and took " << t; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | void ImportKernelCmdline(const std::function<void(const std::string&, const std::string&)>& fn) { | 
|  | std::string cmdline; | 
|  | android::base::ReadFileToString("/proc/cmdline", &cmdline); | 
|  |  | 
|  | for (const auto& entry : android::base::Split(android::base::Trim(cmdline), " ")) { | 
|  | std::vector<std::string> pieces = android::base::Split(entry, "="); | 
|  | if (pieces.size() == 2) { | 
|  | fn(pieces[0], pieces[1]); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void ImportBootconfig(const std::function<void(const std::string&, const std::string&)>& fn) { | 
|  | std::string bootconfig; | 
|  | android::base::ReadFileToString("/proc/bootconfig", &bootconfig); | 
|  |  | 
|  | for (const auto& entry : android::base::Split(bootconfig, "\n")) { | 
|  | std::vector<std::string> pieces = android::base::Split(entry, "="); | 
|  | if (pieces.size() == 2) { | 
|  | // get rid of the extra space between a list of values and remove the quotes. | 
|  | std::string value = android::base::StringReplace(pieces[1], "\", \"", ",", true); | 
|  | value.erase(std::remove(value.begin(), value.end(), '"'), value.end()); | 
|  | fn(android::base::Trim(pieces[0]), android::base::Trim(value)); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | bool make_dir(const std::string& path, mode_t mode) { | 
|  | std::string secontext; | 
|  | if (SelabelLookupFileContext(path, mode, &secontext) && !secontext.empty()) { | 
|  | setfscreatecon(secontext.c_str()); | 
|  | } | 
|  |  | 
|  | int rc = mkdir(path.c_str(), mode); | 
|  |  | 
|  | if (!secontext.empty()) { | 
|  | int save_errno = errno; | 
|  | setfscreatecon(nullptr); | 
|  | errno = save_errno; | 
|  | } | 
|  |  | 
|  | return rc == 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns true is pathname is a directory | 
|  | */ | 
|  | bool is_dir(const char* pathname) { | 
|  | struct stat info; | 
|  | if (stat(pathname, &info) == -1) { | 
|  | return false; | 
|  | } | 
|  | return S_ISDIR(info.st_mode); | 
|  | } | 
|  |  | 
|  | Result<std::string> ExpandProps(const std::string& src) { | 
|  | const char* src_ptr = src.c_str(); | 
|  |  | 
|  | std::string dst; | 
|  |  | 
|  | /* - variables can either be $x.y or ${x.y}, in case they are only part | 
|  | *   of the string. | 
|  | * - will accept $$ as a literal $. | 
|  | * - no nested property expansion, i.e. ${foo.${bar}} is not supported, | 
|  | *   bad things will happen | 
|  | * - ${x.y:-default} will return default value if property empty. | 
|  | */ | 
|  | while (*src_ptr) { | 
|  | const char* c; | 
|  |  | 
|  | c = strchr(src_ptr, '$'); | 
|  | if (!c) { | 
|  | dst.append(src_ptr); | 
|  | return dst; | 
|  | } | 
|  |  | 
|  | dst.append(src_ptr, c); | 
|  | c++; | 
|  |  | 
|  | if (*c == '$') { | 
|  | dst.push_back(*(c++)); | 
|  | src_ptr = c; | 
|  | continue; | 
|  | } else if (*c == '\0') { | 
|  | return dst; | 
|  | } | 
|  |  | 
|  | std::string prop_name; | 
|  | std::string def_val; | 
|  | if (*c == '{') { | 
|  | c++; | 
|  | const char* end = strchr(c, '}'); | 
|  | if (!end) { | 
|  | // failed to find closing brace, abort. | 
|  | return Error() << "unexpected end of string in '" << src << "', looking for }"; | 
|  | } | 
|  | prop_name = std::string(c, end); | 
|  | c = end + 1; | 
|  | size_t def = prop_name.find(":-"); | 
|  | if (def < prop_name.size()) { | 
|  | def_val = prop_name.substr(def + 2); | 
|  | prop_name = prop_name.substr(0, def); | 
|  | } | 
|  | } else { | 
|  | prop_name = c; | 
|  | if (SelinuxGetVendorAndroidVersion() >= __ANDROID_API_R__) { | 
|  | return Error() << "using deprecated syntax for specifying property '" << c | 
|  | << "', use ${name} instead"; | 
|  | } else { | 
|  | LOG(ERROR) << "using deprecated syntax for specifying property '" << c | 
|  | << "', use ${name} instead"; | 
|  | } | 
|  | c += prop_name.size(); | 
|  | } | 
|  |  | 
|  | if (prop_name.empty()) { | 
|  | return Error() << "invalid zero-length property name in '" << src << "'"; | 
|  | } | 
|  |  | 
|  | std::string prop_val = android::base::GetProperty(prop_name, ""); | 
|  | if (prop_val.empty()) { | 
|  | if (def_val.empty()) { | 
|  | return Error() << "property '" << prop_name << "' doesn't exist while expanding '" | 
|  | << src << "'"; | 
|  | } | 
|  | prop_val = def_val; | 
|  | } | 
|  |  | 
|  | dst.append(prop_val); | 
|  | src_ptr = c; | 
|  | } | 
|  |  | 
|  | return dst; | 
|  | } | 
|  |  | 
|  | static std::string init_android_dt_dir() { | 
|  | // Use the standard procfs-based path by default | 
|  | std::string android_dt_dir = kDefaultAndroidDtDir; | 
|  | // The platform may specify a custom Android DT path in kernel cmdline | 
|  | ImportKernelCmdline([&](const std::string& key, const std::string& value) { | 
|  | if (key == "androidboot.android_dt_dir") { | 
|  | android_dt_dir = value; | 
|  | } | 
|  | }); | 
|  | // ..Or bootconfig | 
|  | if (android_dt_dir == kDefaultAndroidDtDir) { | 
|  | ImportBootconfig([&](const std::string& key, const std::string& value) { | 
|  | if (key == "androidboot.android_dt_dir") { | 
|  | android_dt_dir = value; | 
|  | } | 
|  | }); | 
|  | } | 
|  |  | 
|  | LOG(INFO) << "Using Android DT directory " << android_dt_dir; | 
|  | return android_dt_dir; | 
|  | } | 
|  |  | 
|  | // FIXME: The same logic is duplicated in system/core/fs_mgr/ | 
|  | const std::string& get_android_dt_dir() { | 
|  | // Set once and saves time for subsequent calls to this function | 
|  | static const std::string kAndroidDtDir = init_android_dt_dir(); | 
|  | return kAndroidDtDir; | 
|  | } | 
|  |  | 
|  | // Reads the content of device tree file under the platform's Android DT directory. | 
|  | // Returns true if the read is success, false otherwise. | 
|  | bool read_android_dt_file(const std::string& sub_path, std::string* dt_content) { | 
|  | const std::string file_name = get_android_dt_dir() + sub_path; | 
|  | if (android::base::ReadFileToString(file_name, dt_content)) { | 
|  | if (!dt_content->empty()) { | 
|  | dt_content->pop_back();  // Trims the trailing '\0' out. | 
|  | return true; | 
|  | } | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool is_android_dt_value_expected(const std::string& sub_path, const std::string& expected_content) { | 
|  | std::string dt_content; | 
|  | if (read_android_dt_file(sub_path, &dt_content)) { | 
|  | if (dt_content == expected_content) { | 
|  | return true; | 
|  | } | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool IsLegalPropertyName(const std::string& name) { | 
|  | size_t namelen = name.size(); | 
|  |  | 
|  | if (namelen < 1) return false; | 
|  | if (name[0] == '.') return false; | 
|  | if (name[namelen - 1] == '.') return false; | 
|  |  | 
|  | /* Only allow alphanumeric, plus '.', '-', '@', ':', or '_' */ | 
|  | /* Don't allow ".." to appear in a property name */ | 
|  | for (size_t i = 0; i < namelen; i++) { | 
|  | if (name[i] == '.') { | 
|  | // i=0 is guaranteed to never have a dot. See above. | 
|  | if (name[i - 1] == '.') return false; | 
|  | continue; | 
|  | } | 
|  | if (name[i] == '_' || name[i] == '-' || name[i] == '@' || name[i] == ':') continue; | 
|  | if (name[i] >= 'a' && name[i] <= 'z') continue; | 
|  | if (name[i] >= 'A' && name[i] <= 'Z') continue; | 
|  | if (name[i] >= '0' && name[i] <= '9') continue; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | Result<void> IsLegalPropertyValue(const std::string& name, const std::string& value) { | 
|  | if (value.size() >= PROP_VALUE_MAX && !StartsWith(name, "ro.")) { | 
|  | return Error() << "Property value too long"; | 
|  | } | 
|  |  | 
|  | if (mbstowcs(nullptr, value.data(), 0) == static_cast<std::size_t>(-1)) { | 
|  | return Error() << "Value is not a UTF8 encoded string"; | 
|  | } | 
|  |  | 
|  | return {}; | 
|  | } | 
|  |  | 
|  | // Remove unnecessary slashes so that any later checks (e.g., the check for | 
|  | // whether the path is a top-level directory in /data) don't get confused. | 
|  | std::string CleanDirPath(const std::string& path) { | 
|  | std::string result; | 
|  | result.reserve(path.length()); | 
|  | // Collapse duplicate slashes, e.g. //data//foo// => /data/foo/ | 
|  | for (char c : path) { | 
|  | if (c != '/' || result.empty() || result.back() != '/') { | 
|  | result += c; | 
|  | } | 
|  | } | 
|  | // Remove trailing slash, e.g. /data/foo/ => /data/foo | 
|  | if (result.length() > 1 && result.back() == '/') { | 
|  | result.pop_back(); | 
|  | } | 
|  | return result; | 
|  | } | 
|  |  | 
|  | Result<MkdirOptions> ParseMkdir(const std::vector<std::string>& args) { | 
|  | std::string path = CleanDirPath(args[1]); | 
|  | const bool is_toplevel_data_dir = | 
|  | StartsWith(path, kDataDirPrefix) && | 
|  | path.find_first_of('/', kDataDirPrefix.size()) == std::string::npos; | 
|  | FscryptAction fscrypt_action = | 
|  | is_toplevel_data_dir ? FscryptAction::kRequire : FscryptAction::kNone; | 
|  | mode_t mode = 0755; | 
|  | Result<uid_t> uid = -1; | 
|  | Result<gid_t> gid = -1; | 
|  | std::string ref_option = "ref"; | 
|  | bool set_option_encryption = false; | 
|  | bool set_option_key = false; | 
|  |  | 
|  | for (size_t i = 2; i < args.size(); i++) { | 
|  | switch (i) { | 
|  | case 2: | 
|  | mode = std::strtoul(args[2].c_str(), 0, 8); | 
|  | break; | 
|  | case 3: | 
|  | uid = DecodeUid(args[3]); | 
|  | if (!uid.ok()) { | 
|  | return Error() | 
|  | << "Unable to decode UID for '" << args[3] << "': " << uid.error(); | 
|  | } | 
|  | break; | 
|  | case 4: | 
|  | gid = DecodeUid(args[4]); | 
|  | if (!gid.ok()) { | 
|  | return Error() | 
|  | << "Unable to decode GID for '" << args[4] << "': " << gid.error(); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | auto parts = android::base::Split(args[i], "="); | 
|  | if (parts.size() != 2) { | 
|  | return Error() << "Can't parse option: '" << args[i] << "'"; | 
|  | } | 
|  | auto optname = parts[0]; | 
|  | auto optval = parts[1]; | 
|  | if (optname == "encryption") { | 
|  | if (set_option_encryption) { | 
|  | return Error() << "Duplicated option: '" << optname << "'"; | 
|  | } | 
|  | if (optval == "Require") { | 
|  | fscrypt_action = FscryptAction::kRequire; | 
|  | } else if (optval == "None") { | 
|  | fscrypt_action = FscryptAction::kNone; | 
|  | } else if (optval == "Attempt") { | 
|  | fscrypt_action = FscryptAction::kAttempt; | 
|  | } else if (optval == "DeleteIfNecessary") { | 
|  | fscrypt_action = FscryptAction::kDeleteIfNecessary; | 
|  | } else { | 
|  | return Error() << "Unknown encryption option: '" << optval << "'"; | 
|  | } | 
|  | set_option_encryption = true; | 
|  | } else if (optname == "key") { | 
|  | if (set_option_key) { | 
|  | return Error() << "Duplicated option: '" << optname << "'"; | 
|  | } | 
|  | if (optval == "ref" || optval == "per_boot_ref") { | 
|  | ref_option = optval; | 
|  | } else { | 
|  | return Error() << "Unknown key option: '" << optval << "'"; | 
|  | } | 
|  | set_option_key = true; | 
|  | } else { | 
|  | return Error() << "Unknown option: '" << args[i] << "'"; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (set_option_key && fscrypt_action == FscryptAction::kNone) { | 
|  | return Error() << "Key option set but encryption action is none"; | 
|  | } | 
|  | if (is_toplevel_data_dir) { | 
|  | if (!set_option_encryption) { | 
|  | LOG(WARNING) << "Top-level directory needs encryption action, eg mkdir " << path | 
|  | << " <mode> <uid> <gid> encryption=Require"; | 
|  | } | 
|  | if (fscrypt_action == FscryptAction::kNone) { | 
|  | LOG(INFO) << "Not setting encryption policy on: " << path; | 
|  | } | 
|  | } | 
|  |  | 
|  | return MkdirOptions{path, mode, *uid, *gid, fscrypt_action, ref_option}; | 
|  | } | 
|  |  | 
|  | Result<MountAllOptions> ParseMountAll(const std::vector<std::string>& args) { | 
|  | bool compat_mode = false; | 
|  | bool import_rc = false; | 
|  | if (SelinuxGetVendorAndroidVersion() <= __ANDROID_API_Q__) { | 
|  | if (args.size() <= 1) { | 
|  | return Error() << "mount_all requires at least 1 argument"; | 
|  | } | 
|  | compat_mode = true; | 
|  | import_rc = true; | 
|  | } | 
|  |  | 
|  | std::size_t first_option_arg = args.size(); | 
|  | enum mount_mode mode = MOUNT_MODE_DEFAULT; | 
|  |  | 
|  | // If we are <= Q, then stop looking for non-fstab arguments at slot 2. | 
|  | // Otherwise, stop looking at slot 1 (as the fstab path argument is optional >= R). | 
|  | for (std::size_t na = args.size() - 1; na > (compat_mode ? 1 : 0); --na) { | 
|  | if (args[na] == "--early") { | 
|  | first_option_arg = na; | 
|  | mode = MOUNT_MODE_EARLY; | 
|  | } else if (args[na] == "--late") { | 
|  | first_option_arg = na; | 
|  | mode = MOUNT_MODE_LATE; | 
|  | import_rc = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | std::string fstab_path; | 
|  | if (first_option_arg > 1) { | 
|  | fstab_path = args[1]; | 
|  | } else if (compat_mode) { | 
|  | return Error() << "mount_all argument 1 must be the fstab path"; | 
|  | } | 
|  |  | 
|  | std::vector<std::string> rc_paths; | 
|  | for (std::size_t na = 2; na < first_option_arg; ++na) { | 
|  | rc_paths.push_back(args[na]); | 
|  | } | 
|  |  | 
|  | return MountAllOptions{rc_paths, fstab_path, mode, import_rc}; | 
|  | } | 
|  |  | 
|  | Result<std::pair<int, std::vector<std::string>>> ParseRestorecon( | 
|  | const std::vector<std::string>& args) { | 
|  | struct flag_type { | 
|  | const char* name; | 
|  | int value; | 
|  | }; | 
|  | static const flag_type flags[] = { | 
|  | {"--recursive", SELINUX_ANDROID_RESTORECON_RECURSE}, | 
|  | {"--skip-ce", SELINUX_ANDROID_RESTORECON_SKIPCE}, | 
|  | {"--cross-filesystems", SELINUX_ANDROID_RESTORECON_CROSS_FILESYSTEMS}, | 
|  | {0, 0}}; | 
|  |  | 
|  | int flag = 0; | 
|  | std::vector<std::string> paths; | 
|  |  | 
|  | bool in_flags = true; | 
|  | for (size_t i = 1; i < args.size(); ++i) { | 
|  | if (android::base::StartsWith(args[i], "--")) { | 
|  | if (!in_flags) { | 
|  | return Error() << "flags must precede paths"; | 
|  | } | 
|  | bool found = false; | 
|  | for (size_t j = 0; flags[j].name; ++j) { | 
|  | if (args[i] == flags[j].name) { | 
|  | flag |= flags[j].value; | 
|  | found = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!found) { | 
|  | return Error() << "bad flag " << args[i]; | 
|  | } | 
|  | } else { | 
|  | in_flags = false; | 
|  | paths.emplace_back(args[i]); | 
|  | } | 
|  | } | 
|  | return std::pair(flag, paths); | 
|  | } | 
|  |  | 
|  | Result<std::string> ParseSwaponAll(const std::vector<std::string>& args) { | 
|  | if (args.size() <= 1) { | 
|  | if (SelinuxGetVendorAndroidVersion() <= __ANDROID_API_Q__) { | 
|  | return Error() << "swapon_all requires at least 1 argument"; | 
|  | } | 
|  | return {}; | 
|  | } | 
|  | return args[1]; | 
|  | } | 
|  |  | 
|  | Result<std::string> ParseUmountAll(const std::vector<std::string>& args) { | 
|  | if (args.size() <= 1) { | 
|  | if (SelinuxGetVendorAndroidVersion() <= __ANDROID_API_Q__) { | 
|  | return Error() << "umount_all requires at least 1 argument"; | 
|  | } | 
|  | return {}; | 
|  | } | 
|  | return args[1]; | 
|  | } | 
|  |  | 
|  | static void InitAborter(const char* abort_message) { | 
|  | // When init forks, it continues to use this aborter for LOG(FATAL), but we want children to | 
|  | // simply abort instead of trying to reboot the system. | 
|  | if (getpid() != 1) { | 
|  | android::base::DefaultAborter(abort_message); | 
|  | return; | 
|  | } | 
|  |  | 
|  | InitFatalReboot(SIGABRT); | 
|  | } | 
|  |  | 
|  | // The kernel opens /dev/console and uses that fd for stdin/stdout/stderr if there is a serial | 
|  | // console enabled and no initramfs, otherwise it does not provide any fds for stdin/stdout/stderr. | 
|  | // SetStdioToDevNull() is used to close these existing fds if they exist and replace them with | 
|  | // /dev/null regardless. | 
|  | // | 
|  | // In the case that these fds are provided by the kernel, the exec of second stage init causes an | 
|  | // SELinux denial as it does not have access to /dev/console.  In the case that they are not | 
|  | // provided, exec of any further process is potentially dangerous as the first fd's opened by that | 
|  | // process will take the stdin/stdout/stderr fileno's, which can cause issues if printf(), etc is | 
|  | // then used by that process. | 
|  | // | 
|  | // Lastly, simply calling SetStdioToDevNull() in first stage init is not enough, since first | 
|  | // stage init still runs in kernel context, future child processes will not have permissions to | 
|  | // access any fds that it opens, including the one opened below for /dev/null.  Therefore, | 
|  | // SetStdioToDevNull() must be called again in second stage init. | 
|  | void SetStdioToDevNull(char** argv) { | 
|  | // Make stdin/stdout/stderr all point to /dev/null. | 
|  | int fd = open("/dev/null", O_RDWR);  // NOLINT(android-cloexec-open) | 
|  | if (fd == -1) { | 
|  | int saved_errno = errno; | 
|  | android::base::InitLogging(argv, &android::base::KernelLogger, InitAborter); | 
|  | errno = saved_errno; | 
|  | PLOG(FATAL) << "Couldn't open /dev/null"; | 
|  | } | 
|  | dup2(fd, STDIN_FILENO); | 
|  | dup2(fd, STDOUT_FILENO); | 
|  | dup2(fd, STDERR_FILENO); | 
|  | if (fd > STDERR_FILENO) close(fd); | 
|  | } | 
|  |  | 
|  | void InitKernelLogging(char** argv) { | 
|  | SetFatalRebootTarget(); | 
|  | android::base::InitLogging(argv, &android::base::KernelLogger, InitAborter); | 
|  | } | 
|  |  | 
|  | bool IsRecoveryMode() { | 
|  | return access("/system/bin/recovery", F_OK) == 0; | 
|  | } | 
|  |  | 
|  | // Check if default mount namespace is ready to be used with APEX modules | 
|  | static bool is_default_mount_namespace_ready = false; | 
|  |  | 
|  | bool IsDefaultMountNamespaceReady() { | 
|  | return is_default_mount_namespace_ready; | 
|  | } | 
|  |  | 
|  | void SetDefaultMountNamespaceReady() { | 
|  | is_default_mount_namespace_ready = true; | 
|  | } | 
|  |  | 
|  | bool IsMicrodroid() { | 
|  | static bool is_microdroid = android::base::GetProperty("ro.hardware", "") == "microdroid"; | 
|  | return is_microdroid; | 
|  | } | 
|  |  | 
|  | bool Has32BitAbi() { | 
|  | static bool has = !android::base::GetProperty("ro.product.cpu.abilist32", "").empty(); | 
|  | return has; | 
|  | } | 
|  |  | 
|  | std::string GetApexNameFromFileName(const std::string& path) { | 
|  | static const std::string kApexDir = "/apex/"; | 
|  | if (StartsWith(path, kApexDir)) { | 
|  | auto begin = kApexDir.size(); | 
|  | auto end = path.find('/', begin); | 
|  | return path.substr(begin, end - begin); | 
|  | } | 
|  | return ""; | 
|  | } | 
|  |  | 
|  | std::vector<std::string> FilterVersionedConfigs(const std::vector<std::string>& configs, | 
|  | int active_sdk) { | 
|  | std::vector<std::string> filtered_configs; | 
|  |  | 
|  | std::map<std::string, std::pair<std::string, int>> script_map; | 
|  | for (const auto& c : configs) { | 
|  | int sdk = 0; | 
|  | const std::vector<std::string> parts = android::base::Split(c, "."); | 
|  | std::string base; | 
|  | if (parts.size() < 2) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | // parts[size()-1], aka the suffix, should be "rc" or "#rc" | 
|  | // any other pattern gets discarded | 
|  |  | 
|  | const auto& suffix = parts[parts.size() - 1]; | 
|  | if (suffix == "rc") { | 
|  | sdk = 0; | 
|  | } else { | 
|  | char trailer[9] = {0}; | 
|  | int r = sscanf(suffix.c_str(), "%d%8s", &sdk, trailer); | 
|  | if (r != 2) { | 
|  | continue; | 
|  | } | 
|  | if (strlen(trailer) > 2 || strcmp(trailer, "rc") != 0) { | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (sdk < 0 || sdk > active_sdk) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | base = parts[0]; | 
|  | for (unsigned int i = 1; i < parts.size() - 1; i++) { | 
|  | base = base + "." + parts[i]; | 
|  | } | 
|  |  | 
|  | // is this preferred over what we already have | 
|  | auto it = script_map.find(base); | 
|  | if (it == script_map.end() || it->second.second < sdk) { | 
|  | script_map[base] = std::make_pair(c, sdk); | 
|  | } | 
|  | } | 
|  |  | 
|  | for (const auto& m : script_map) { | 
|  | filtered_configs.push_back(m.second.first); | 
|  | } | 
|  | return filtered_configs; | 
|  | } | 
|  |  | 
|  | }  // namespace init | 
|  | }  // namespace android |