| /* | 
 |  * Copyright (C) 2016 The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *      http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 |  | 
 | #ifndef LIBMEMUNREACHABLE_LEAK_PIPE_H_ | 
 | #define LIBMEMUNREACHABLE_LEAK_PIPE_H_ | 
 |  | 
 | #include <sys/socket.h> | 
 |  | 
 | #include <vector> | 
 |  | 
 | #include "android-base/macros.h" | 
 |  | 
 | #include "ScopedPipe.h" | 
 | #include "log.h" | 
 |  | 
 | namespace android { | 
 |  | 
 | // LeakPipe implements a pipe that can transfer vectors of simple objects | 
 | // between processes.  The pipe is created in the sending process and | 
 | // transferred over a socketpair that was created before forking.  This ensures | 
 | // that only the sending process can have the send side of the pipe open, so if | 
 | // the sending process dies the pipe will close. | 
 | class LeakPipe { | 
 |  public: | 
 |   LeakPipe() { | 
 |     int ret = socketpair(AF_UNIX, SOCK_STREAM | SOCK_CLOEXEC, 0, sv_); | 
 |     if (ret < 0) { | 
 |       MEM_LOG_ALWAYS_FATAL("failed to create socketpair: %s", strerror(errno)); | 
 |     } | 
 |   } | 
 |  | 
 |   ~LeakPipe() { Close(); } | 
 |  | 
 |   void Close() { | 
 |     close(sv_[0]); | 
 |     close(sv_[1]); | 
 |     sv_[0] = -1; | 
 |     sv_[1] = -1; | 
 |   } | 
 |  | 
 |   bool OpenReceiver() { | 
 |     int fd = ReceiveFd(sv_[0]); | 
 |     if (fd < 0) { | 
 |       return false; | 
 |     } | 
 |  | 
 |     receiver_.SetFd(fd); | 
 |     return true; | 
 |   } | 
 |  | 
 |   bool OpenSender() { | 
 |     ScopedPipe pipe; | 
 |  | 
 |     if (!SendFd(sv_[1], pipe.Receiver())) { | 
 |       return false; | 
 |     } | 
 |     pipe.ReleaseReceiver(); | 
 |  | 
 |     sender_.SetFd(pipe.ReleaseSender()); | 
 |     return true; | 
 |   } | 
 |  | 
 |   class LeakPipeBase { | 
 |    public: | 
 |     LeakPipeBase() : fd_(-1) {} | 
 |  | 
 |     ~LeakPipeBase() { Close(); } | 
 |  | 
 |     void SetFd(int fd) { fd_ = fd; } | 
 |  | 
 |     void Close() { | 
 |       close(fd_); | 
 |       fd_ = -1; | 
 |     } | 
 |  | 
 |    protected: | 
 |     int fd_; | 
 |  | 
 |    private: | 
 |     DISALLOW_COPY_AND_ASSIGN(LeakPipeBase); | 
 |   }; | 
 |  | 
 |   class LeakPipeSender : public LeakPipeBase { | 
 |    public: | 
 |     using LeakPipeBase::LeakPipeBase; | 
 |  | 
 |     template <typename T> | 
 |     bool Send(const T& value) { | 
 |       ssize_t ret = TEMP_FAILURE_RETRY(write(fd_, &value, sizeof(T))); | 
 |       if (ret < 0) { | 
 |         MEM_ALOGE("failed to send value: %s", strerror(errno)); | 
 |         return false; | 
 |       } else if (static_cast<size_t>(ret) != sizeof(T)) { | 
 |         MEM_ALOGE("eof while writing value"); | 
 |         return false; | 
 |       } | 
 |  | 
 |       return true; | 
 |     } | 
 |  | 
 |     template <class T, class Alloc = std::allocator<T>> | 
 |     bool SendVector(const std::vector<T, Alloc>& vector) { | 
 |       size_t size = vector.size() * sizeof(T); | 
 |       if (!Send(size)) { | 
 |         return false; | 
 |       } | 
 |  | 
 |       ssize_t ret = TEMP_FAILURE_RETRY(write(fd_, vector.data(), size)); | 
 |       if (ret < 0) { | 
 |         MEM_ALOGE("failed to send vector: %s", strerror(errno)); | 
 |         return false; | 
 |       } else if (static_cast<size_t>(ret) != size) { | 
 |         MEM_ALOGE("eof while writing vector"); | 
 |         return false; | 
 |       } | 
 |  | 
 |       return true; | 
 |     } | 
 |   }; | 
 |  | 
 |   class LeakPipeReceiver : public LeakPipeBase { | 
 |    public: | 
 |     using LeakPipeBase::LeakPipeBase; | 
 |  | 
 |     template <typename T> | 
 |     bool Receive(T* value) { | 
 |       ssize_t ret = TEMP_FAILURE_RETRY(read(fd_, reinterpret_cast<void*>(value), sizeof(T))); | 
 |       if (ret < 0) { | 
 |         MEM_ALOGE("failed to receive value: %s", strerror(errno)); | 
 |         return false; | 
 |       } else if (static_cast<size_t>(ret) != sizeof(T)) { | 
 |         MEM_ALOGE("eof while receiving value"); | 
 |         return false; | 
 |       } | 
 |  | 
 |       return true; | 
 |     } | 
 |  | 
 |     template <class T, class Alloc = std::allocator<T>> | 
 |     bool ReceiveVector(std::vector<T, Alloc>& vector) { | 
 |       size_t size = 0; | 
 |       if (!Receive(&size)) { | 
 |         return false; | 
 |       } | 
 |  | 
 |       vector.resize(size / sizeof(T)); | 
 |  | 
 |       char* ptr = reinterpret_cast<char*>(vector.data()); | 
 |       while (size > 0) { | 
 |         ssize_t ret = TEMP_FAILURE_RETRY(read(fd_, ptr, size)); | 
 |         if (ret < 0) { | 
 |           MEM_ALOGE("failed to send vector: %s", strerror(errno)); | 
 |           return false; | 
 |         } else if (ret == 0) { | 
 |           MEM_ALOGE("eof while reading vector"); | 
 |           return false; | 
 |         } | 
 |         size -= ret; | 
 |         ptr += ret; | 
 |       } | 
 |  | 
 |       return true; | 
 |     } | 
 |   }; | 
 |  | 
 |   LeakPipeReceiver& Receiver() { return receiver_; } | 
 |  | 
 |   LeakPipeSender& Sender() { return sender_; } | 
 |  | 
 |  private: | 
 |   LeakPipeReceiver receiver_; | 
 |   LeakPipeSender sender_; | 
 |   bool SendFd(int sock, int fd); | 
 |   int ReceiveFd(int sock); | 
 |   DISALLOW_COPY_AND_ASSIGN(LeakPipe); | 
 |   int sv_[2]; | 
 | }; | 
 |  | 
 | }  // namespace android | 
 |  | 
 | #endif  // LIBMEMUNREACHABLE_LEAK_PIPE_H_ |