|  | /* | 
|  | * Copyright (C) 2009 bsdroid project | 
|  | *               Alexey Tarasov <tarasov@dodologics.com> | 
|  | * | 
|  | * Copyright (C) 2007 The Android Open Source Project | 
|  | * | 
|  | * Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | * you may not use this file except in compliance with the License. | 
|  | * You may obtain a copy of the License at | 
|  | * | 
|  | *      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | * | 
|  | * Unless required by applicable law or agreed to in writing, software | 
|  | * distributed under the License is distributed on an "AS IS" BASIS, | 
|  | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | * See the License for the specific language governing permissions and | 
|  | * limitations under the License. | 
|  | */ | 
|  |  | 
|  | #include <sys/endian.h> | 
|  | #include <sys/ioctl.h> | 
|  | #include <sys/types.h> | 
|  | #include <sys/uio.h> | 
|  |  | 
|  | #include <err.h> | 
|  | #include <errno.h> | 
|  | #include <poll.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <strings.h> | 
|  | #include <string.h> | 
|  | #include <sysexits.h> | 
|  | #include <unistd.h> | 
|  | #include <libusb.h> | 
|  | #include "sysdeps.h" | 
|  |  | 
|  | #define   TRACE_TAG  TRACE_USB | 
|  | #include "adb.h" | 
|  |  | 
|  | static adb_mutex_t usb_lock = ADB_MUTEX_INITIALIZER; | 
|  | static libusb_context *ctx = NULL; | 
|  |  | 
|  | struct usb_handle | 
|  | { | 
|  | usb_handle            *prev; | 
|  | usb_handle            *next; | 
|  |  | 
|  | libusb_device         *dev; | 
|  | libusb_device_handle  *devh; | 
|  | int                   interface; | 
|  | uint8_t               dev_bus; | 
|  | uint8_t               dev_addr; | 
|  |  | 
|  | int                   zero_mask; | 
|  | unsigned char         end_point_address[2]; | 
|  | char                  serial[128]; | 
|  |  | 
|  | adb_cond_t            notify; | 
|  | adb_mutex_t           lock; | 
|  | }; | 
|  |  | 
|  | static struct usb_handle handle_list = { | 
|  | .prev = &handle_list, | 
|  | .next = &handle_list, | 
|  | }; | 
|  |  | 
|  | void | 
|  | usb_cleanup() | 
|  | { | 
|  | libusb_exit(ctx); | 
|  | } | 
|  |  | 
|  | void | 
|  | report_bulk_libusb_error(int r) | 
|  | { | 
|  | switch (r) { | 
|  | case LIBUSB_ERROR_TIMEOUT: | 
|  | D("Transfer timeout\n"); | 
|  | break; | 
|  |  | 
|  | case LIBUSB_ERROR_PIPE: | 
|  | D("Control request is not supported\n"); | 
|  | break; | 
|  |  | 
|  | case LIBUSB_ERROR_OVERFLOW: | 
|  | D("Device offered more data\n"); | 
|  | break; | 
|  |  | 
|  | case LIBUSB_ERROR_NO_DEVICE : | 
|  | D("Device was disconnected\n"); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | D("Error %d during transfer\n", r); | 
|  | break; | 
|  | }; | 
|  | } | 
|  |  | 
|  | static int | 
|  | usb_bulk_write(usb_handle *uh, const void *data, int len) | 
|  | { | 
|  | int r = 0; | 
|  | int transferred = 0; | 
|  |  | 
|  | r = libusb_bulk_transfer(uh->devh, uh->end_point_address[1], (void *)data, len, | 
|  | &transferred, 0); | 
|  |  | 
|  | if (r != 0) { | 
|  | D("usb_bulk_write(): "); | 
|  | report_bulk_libusb_error(r); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | return (transferred); | 
|  | } | 
|  |  | 
|  | static int | 
|  | usb_bulk_read(usb_handle *uh, void *data, int len) | 
|  | { | 
|  | int r = 0; | 
|  | int transferred = 0; | 
|  |  | 
|  | r = libusb_bulk_transfer(uh->devh, uh->end_point_address[0], data, len, | 
|  | &transferred, 0); | 
|  |  | 
|  | if (r != 0) { | 
|  | D("usb_bulk_read(): "); | 
|  | report_bulk_libusb_error(r); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | return (transferred); | 
|  | } | 
|  |  | 
|  | int | 
|  | usb_write(struct usb_handle *uh, const void *_data, int len) | 
|  | { | 
|  | unsigned char *data = (unsigned char*) _data; | 
|  | int n; | 
|  | int need_zero = 0; | 
|  |  | 
|  | if (uh->zero_mask == 1) { | 
|  | if (!(len & uh->zero_mask)) { | 
|  | need_zero = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | D("usb_write(): %p:%d -> transport %p\n", _data, len, uh); | 
|  |  | 
|  | while (len > 0) { | 
|  | int xfer = (len > 4096) ? 4096 : len; | 
|  |  | 
|  | n = usb_bulk_write(uh, data, xfer); | 
|  |  | 
|  | if (n != xfer) { | 
|  | D("usb_write(): failed for transport %p (%d bytes left)\n", uh, len); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | len -= xfer; | 
|  | data += xfer; | 
|  | } | 
|  |  | 
|  | if (need_zero){ | 
|  | n = usb_bulk_write(uh, _data, 0); | 
|  |  | 
|  | if (n < 0) { | 
|  | D("usb_write(): failed to finish operation for transport %p\n", uh); | 
|  | } | 
|  | return n; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | usb_read(struct usb_handle *uh, void *_data, int len) | 
|  | { | 
|  | unsigned char *data = (unsigned char*) _data; | 
|  | int n; | 
|  |  | 
|  | D("usb_read(): %p:%d <- transport %p\n", _data, len, uh); | 
|  |  | 
|  | while (len > 0) { | 
|  | int xfer = (len > 4096) ? 4096 : len; | 
|  |  | 
|  | n = usb_bulk_read(uh, data, xfer); | 
|  |  | 
|  | if (n != xfer) { | 
|  | if (n > 0) { | 
|  | data += n; | 
|  | len -= n; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | D("usb_read(): failed for transport %p (%d bytes left)\n", uh, len); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | len -= xfer; | 
|  | data += xfer; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | usb_close(struct usb_handle *h) | 
|  | { | 
|  | D("usb_close(): closing transport %p\n", h); | 
|  | adb_mutex_lock(&usb_lock); | 
|  |  | 
|  | h->next->prev = h->prev; | 
|  | h->prev->next = h->next; | 
|  | h->prev = NULL; | 
|  | h->next = NULL; | 
|  |  | 
|  | libusb_release_interface(h->devh, h->interface); | 
|  | libusb_close(h->devh); | 
|  | libusb_unref_device(h->dev); | 
|  |  | 
|  | adb_mutex_unlock(&usb_lock); | 
|  |  | 
|  | free(h); | 
|  |  | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | void usb_kick(struct usb_handle *h) | 
|  | { | 
|  | D("usb_cick(): kicking transport %p\n", h); | 
|  |  | 
|  | adb_mutex_lock(&h->lock); | 
|  | unregister_usb_transport(h); | 
|  | adb_mutex_unlock(&h->lock); | 
|  |  | 
|  | h->next->prev = h->prev; | 
|  | h->prev->next = h->next; | 
|  | h->prev = NULL; | 
|  | h->next = NULL; | 
|  |  | 
|  | libusb_release_interface(h->devh, h->interface); | 
|  | libusb_close(h->devh); | 
|  | libusb_unref_device(h->dev); | 
|  | free(h); | 
|  | } | 
|  |  | 
|  | int | 
|  | check_usb_interface(libusb_interface *interface, | 
|  | libusb_device_descriptor *desc, | 
|  | struct usb_handle *uh) | 
|  | { | 
|  | int e; | 
|  |  | 
|  | if (interface->num_altsetting == 0) { | 
|  | D("check_usb_interface(): No interface settings\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | libusb_interface_descriptor *idesc = &interface->altsetting[0]; | 
|  |  | 
|  | if (idesc->bNumEndpoints != 2) { | 
|  | D("check_usb_interface(): Interface have not 2 endpoints, ignoring\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | for (e = 0; e < idesc->bNumEndpoints; e++) { | 
|  | libusb_endpoint_descriptor *edesc = &idesc->endpoint[e]; | 
|  |  | 
|  | if (edesc->bmAttributes != LIBUSB_TRANSFER_TYPE_BULK) { | 
|  | D("check_usb_interface(): Endpoint (%u) is not bulk (%u), ignoring\n", | 
|  | edesc->bmAttributes, LIBUSB_TRANSFER_TYPE_BULK); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (edesc->bEndpointAddress & LIBUSB_ENDPOINT_IN) | 
|  | uh->end_point_address[0] = edesc->bEndpointAddress; | 
|  | else | 
|  | uh->end_point_address[1] = edesc->bEndpointAddress; | 
|  |  | 
|  | /* aproto 01 needs 0 termination */ | 
|  | if (idesc->bInterfaceProtocol == 0x01) { | 
|  | uh->zero_mask = edesc->wMaxPacketSize - 1; | 
|  | D("check_usb_interface(): Forced Android interface protocol v.1\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | D("check_usb_interface(): Device: %04x:%04x " | 
|  | "iclass: %x, isclass: %x, iproto: %x ep: %x/%x-> ", | 
|  | desc->idVendor, desc->idProduct, idesc->bInterfaceClass, | 
|  | idesc->bInterfaceSubClass, idesc->bInterfaceProtocol, | 
|  | uh->end_point_address[0], uh->end_point_address[1]); | 
|  |  | 
|  | if (!is_adb_interface(desc->idVendor, desc->idProduct, | 
|  | idesc->bInterfaceClass, idesc->bInterfaceSubClass, | 
|  | idesc->bInterfaceProtocol)) | 
|  | { | 
|  | D("not matches\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | D("matches\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int | 
|  | check_usb_interfaces(libusb_config_descriptor *config, | 
|  | libusb_device_descriptor *desc, struct usb_handle *uh) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < config->bNumInterfaces; ++i) { | 
|  | if (check_usb_interface(&config->interface[i], desc, uh) != -1) { | 
|  | /* found some interface and saved information about it */ | 
|  | D("check_usb_interfaces(): Interface %d of %04x:%04x " | 
|  | "matches Android device\n", i, desc->idVendor, | 
|  | desc->idProduct); | 
|  |  | 
|  | return  i; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | int | 
|  | register_device(struct usb_handle *uh, const char *serial) | 
|  | { | 
|  | D("register_device(): Registering %p [%s] as USB transport\n", | 
|  | uh, serial); | 
|  |  | 
|  | struct usb_handle *usb= NULL; | 
|  |  | 
|  | usb = calloc(1, sizeof(struct usb_handle)); | 
|  | memcpy(usb, uh, sizeof(struct usb_handle)); | 
|  | strcpy(usb->serial, uh->serial); | 
|  |  | 
|  | adb_cond_init(&usb->notify, 0); | 
|  | adb_mutex_init(&usb->lock, 0); | 
|  |  | 
|  | adb_mutex_lock(&usb_lock); | 
|  |  | 
|  | usb->next = &handle_list; | 
|  | usb->prev = handle_list.prev; | 
|  | usb->prev->next = usb; | 
|  | usb->next->prev = usb; | 
|  |  | 
|  | adb_mutex_unlock(&usb_lock); | 
|  |  | 
|  | register_usb_transport(usb, serial, NULL, 1); | 
|  |  | 
|  | return (1); | 
|  | } | 
|  |  | 
|  | int | 
|  | already_registered(usb_handle *uh) | 
|  | { | 
|  | struct usb_handle *usb= NULL; | 
|  | int exists = 0; | 
|  |  | 
|  | adb_mutex_lock(&usb_lock); | 
|  |  | 
|  | for (usb = handle_list.next; usb != &handle_list; usb = usb->next) { | 
|  | if ((usb->dev_bus == uh->dev_bus) && | 
|  | (usb->dev_addr == uh->dev_addr)) | 
|  | { | 
|  | exists = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | adb_mutex_unlock(&usb_lock); | 
|  |  | 
|  | return exists; | 
|  | } | 
|  |  | 
|  | void | 
|  | check_device(libusb_device *dev) | 
|  | { | 
|  | struct usb_handle uh; | 
|  | int i = 0; | 
|  | int found = -1; | 
|  | char serial[256] = {0}; | 
|  |  | 
|  | libusb_device_descriptor desc; | 
|  | libusb_config_descriptor *config = NULL; | 
|  |  | 
|  | int r = libusb_get_device_descriptor(dev, &desc); | 
|  |  | 
|  | if (r != LIBUSB_SUCCESS) { | 
|  | D("check_device(): Failed to get device descriptor\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if ((desc.idVendor == 0) && (desc.idProduct == 0)) | 
|  | return; | 
|  |  | 
|  | D("check_device(): Probing usb device %04x:%04x\n", | 
|  | desc.idVendor, desc.idProduct); | 
|  |  | 
|  | if (!is_adb_interface (desc.idVendor, desc.idProduct, | 
|  | ADB_CLASS, ADB_SUBCLASS, ADB_PROTOCOL)) | 
|  | { | 
|  | D("check_device(): Ignored due unknown vendor id\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | uh.dev_bus = libusb_get_bus_number(dev); | 
|  | uh.dev_addr = libusb_get_device_address(dev); | 
|  |  | 
|  | if (already_registered(&uh)) { | 
|  | D("check_device(): Device (bus: %d, address: %d) " | 
|  | "is already registered\n", uh.dev_bus, uh.dev_addr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | D("check_device(): Device bus: %d, address: %d\n", | 
|  | uh.dev_bus, uh.dev_addr); | 
|  |  | 
|  | r = libusb_get_active_config_descriptor(dev, &config); | 
|  |  | 
|  | if (r != 0) { | 
|  | if (r == LIBUSB_ERROR_NOT_FOUND) { | 
|  | D("check_device(): Device %4x:%4x is unconfigured\n", | 
|  | desc.idVendor, desc.idProduct); | 
|  | return; | 
|  | } | 
|  |  | 
|  | D("check_device(): Failed to get configuration for %4x:%4x\n", | 
|  | desc.idVendor, desc.idProduct); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (config == NULL) { | 
|  | D("check_device(): Sanity check failed after " | 
|  | "getting active config\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (config->interface != NULL) { | 
|  | found = check_usb_interfaces(config, &desc, &uh); | 
|  | } | 
|  |  | 
|  | /* not needed anymore */ | 
|  | libusb_free_config_descriptor(config); | 
|  |  | 
|  | r = libusb_open(dev, &uh.devh); | 
|  | uh.dev = dev; | 
|  |  | 
|  | if (r != 0) { | 
|  | switch (r) { | 
|  | case LIBUSB_ERROR_NO_MEM: | 
|  | D("check_device(): Memory allocation problem\n"); | 
|  | break; | 
|  |  | 
|  | case LIBUSB_ERROR_ACCESS: | 
|  | D("check_device(): Permissions problem, " | 
|  | "current user priveleges are messed up?\n"); | 
|  | break; | 
|  |  | 
|  | case LIBUSB_ERROR_NO_DEVICE: | 
|  | D("check_device(): Device disconected, bad cable?\n"); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | D("check_device(): libusb triggered error %d\n", r); | 
|  | } | 
|  | // skip rest | 
|  | found = -1; | 
|  | } | 
|  |  | 
|  | if (found >= 0) { | 
|  | D("check_device(): Device matches Android interface\n"); | 
|  | // read the device's serial number | 
|  | memset(serial, 0, sizeof(serial)); | 
|  | uh.interface = found; | 
|  |  | 
|  | r = libusb_claim_interface(uh.devh, uh.interface); | 
|  |  | 
|  | if (r < 0) { | 
|  | D("check_device(): Failed to claim interface %d\n", | 
|  | uh.interface); | 
|  |  | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | if (desc.iSerialNumber) { | 
|  | // reading serial | 
|  | uint16_t    buffer[128] = {0}; | 
|  | uint16_t    languages[128] = {0}; | 
|  | int languageCount = 0; | 
|  |  | 
|  | memset(languages, 0, sizeof(languages)); | 
|  | r = libusb_control_transfer(uh.devh, | 
|  | LIBUSB_ENDPOINT_IN |  LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE, | 
|  | LIBUSB_REQUEST_GET_DESCRIPTOR, LIBUSB_DT_STRING << 8, | 
|  | 0, (uint8_t *)languages, sizeof(languages), 0); | 
|  |  | 
|  | if (r <= 0) { | 
|  | D("check_device(): Failed to get languages count\n"); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | languageCount = (r - 2) / 2; | 
|  |  | 
|  | for (i = 1; i <= languageCount; ++i) { | 
|  | memset(buffer, 0, sizeof(buffer)); | 
|  |  | 
|  | r = libusb_control_transfer(uh.devh, | 
|  | LIBUSB_ENDPOINT_IN |  LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE, | 
|  | LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_STRING << 8) | desc.iSerialNumber, | 
|  | languages[i], (uint8_t *)buffer, sizeof(buffer), 0); | 
|  |  | 
|  | if (r > 0) { /* converting serial */ | 
|  | int j = 0; | 
|  | r /= 2; | 
|  |  | 
|  | for (j = 1; j < r; ++j) | 
|  | serial[j - 1] = buffer[j]; | 
|  |  | 
|  | serial[j - 1] = '\0'; | 
|  | break; /* languagesCount cycle */ | 
|  | } | 
|  | } | 
|  |  | 
|  | if (register_device(&uh, serial) == 0) { | 
|  | D("check_device(): Failed to register device\n"); | 
|  | goto fail_interface; | 
|  | } | 
|  |  | 
|  | libusb_ref_device(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | fail_interface: | 
|  | libusb_release_interface(uh.devh, uh.interface); | 
|  |  | 
|  | fail: | 
|  | libusb_close(uh.devh); | 
|  | uh.devh = NULL; | 
|  | } | 
|  |  | 
|  | int | 
|  | check_device_connected(struct usb_handle *uh) | 
|  | { | 
|  | int r = libusb_kernel_driver_active(uh->devh, uh->interface); | 
|  |  | 
|  | if (r == LIBUSB_ERROR_NO_DEVICE) | 
|  | return 0; | 
|  |  | 
|  | if (r < 0) | 
|  | return -1; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | void | 
|  | kick_disconnected() | 
|  | { | 
|  | struct usb_handle *usb= NULL; | 
|  |  | 
|  | adb_mutex_lock(&usb_lock); | 
|  |  | 
|  | for (usb = handle_list.next; usb != &handle_list; usb = usb->next) { | 
|  |  | 
|  | if (check_device_connected(usb) == 0) { | 
|  | D("kick_disconnected(): Transport %p is not online anymore\n", | 
|  | usb); | 
|  |  | 
|  | usb_kick(usb); | 
|  | } | 
|  | } | 
|  |  | 
|  | adb_mutex_unlock(&usb_lock); | 
|  | } | 
|  |  | 
|  | void | 
|  | scan_usb_devices() | 
|  | { | 
|  | D("scan_usb_devices(): started\n"); | 
|  |  | 
|  | libusb_device **devs= NULL; | 
|  | libusb_device *dev= NULL; | 
|  | ssize_t cnt = libusb_get_device_list(ctx, &devs); | 
|  |  | 
|  | if (cnt < 0) { | 
|  | D("scan_usb_devices(): Failed to get device list (error: %d)\n", | 
|  | cnt); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | int i = 0; | 
|  |  | 
|  | while ((dev = devs[i++]) != NULL) { | 
|  | check_device(dev); | 
|  | } | 
|  |  | 
|  | libusb_free_device_list(devs, 1); | 
|  | } | 
|  |  | 
|  | void * | 
|  | device_poll_thread(void* unused) | 
|  | { | 
|  | D("device_poll_thread(): Created USB scan thread\n"); | 
|  |  | 
|  | for (;;) { | 
|  | sleep(5); | 
|  | kick_disconnected(); | 
|  | scan_usb_devices(); | 
|  | } | 
|  |  | 
|  | /* never reaching this point */ | 
|  | return (NULL); | 
|  | } | 
|  |  | 
|  | static void | 
|  | sigalrm_handler(int signo) | 
|  | { | 
|  | /* nothing */ | 
|  | } | 
|  |  | 
|  | void | 
|  | usb_init() | 
|  | { | 
|  | D("usb_init(): started\n"); | 
|  | adb_thread_t        tid; | 
|  | struct sigaction actions; | 
|  |  | 
|  | int r = libusb_init(&ctx); | 
|  |  | 
|  | if (r != LIBUSB_SUCCESS) { | 
|  | err(EX_IOERR, "Failed to init libusb\n"); | 
|  | } | 
|  |  | 
|  | memset(&actions, 0, sizeof(actions)); | 
|  |  | 
|  | sigemptyset(&actions.sa_mask); | 
|  |  | 
|  | actions.sa_flags = 0; | 
|  | actions.sa_handler = sigalrm_handler; | 
|  |  | 
|  | sigaction(SIGALRM, &actions, NULL); | 
|  |  | 
|  | /* initial device scan */ | 
|  | scan_usb_devices(); | 
|  |  | 
|  | /* starting USB event polling thread */ | 
|  | if (adb_thread_create(&tid, device_poll_thread, NULL)) { | 
|  | err(EX_IOERR, "cannot create USB scan thread\n"); | 
|  | } | 
|  |  | 
|  | D("usb_init(): finished\n"); | 
|  | } | 
|  |  |