|  | /* | 
|  | * Copyright (C) 2008 The Android Open Source Project | 
|  | * | 
|  | * Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | * you may not use this file except in compliance with the License. | 
|  | * You may obtain a copy of the License at | 
|  | * | 
|  | *      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | * | 
|  | * Unless required by applicable law or agreed to in writing, software | 
|  | * distributed under the License is distributed on an "AS IS" BASIS, | 
|  | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | * See the License for the specific language governing permissions and | 
|  | * limitations under the License. | 
|  | */ | 
|  |  | 
|  | #include <ctype.h> | 
|  | #include <dirent.h> | 
|  | #include <errno.h> | 
|  | #include <fcntl.h> | 
|  | #include <libgen.h> | 
|  | #include <paths.h> | 
|  | #include <signal.h> | 
|  | #include <stdarg.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <sys/epoll.h> | 
|  | #include <sys/mount.h> | 
|  | #include <sys/socket.h> | 
|  | #include <sys/stat.h> | 
|  | #include <sys/types.h> | 
|  | #include <sys/un.h> | 
|  | #include <sys/wait.h> | 
|  | #include <unistd.h> | 
|  |  | 
|  | #include <mtd/mtd-user.h> | 
|  |  | 
|  | #include <selinux/selinux.h> | 
|  | #include <selinux/label.h> | 
|  | #include <selinux/android.h> | 
|  |  | 
|  | #include <base/file.h> | 
|  | #include <base/stringprintf.h> | 
|  | #include <base/strings.h> | 
|  | #include <cutils/android_reboot.h> | 
|  | #include <cutils/fs.h> | 
|  | #include <cutils/iosched_policy.h> | 
|  | #include <cutils/list.h> | 
|  | #include <cutils/sockets.h> | 
|  | #include <private/android_filesystem_config.h> | 
|  |  | 
|  | #include <memory> | 
|  |  | 
|  | #include "action.h" | 
|  | #include "bootchart.h" | 
|  | #include "devices.h" | 
|  | #include "init.h" | 
|  | #include "init_parser.h" | 
|  | #include "keychords.h" | 
|  | #include "log.h" | 
|  | #include "property_service.h" | 
|  | #include "service.h" | 
|  | #include "signal_handler.h" | 
|  | #include "ueventd.h" | 
|  | #include "util.h" | 
|  | #include "watchdogd.h" | 
|  |  | 
|  | struct selabel_handle *sehandle; | 
|  | struct selabel_handle *sehandle_prop; | 
|  |  | 
|  | static int property_triggers_enabled = 0; | 
|  |  | 
|  | static char qemu[32]; | 
|  |  | 
|  | int have_console; | 
|  | std::string console_name = "/dev/console"; | 
|  | static time_t process_needs_restart; | 
|  |  | 
|  | const char *ENV[32]; | 
|  |  | 
|  | bool waiting_for_exec = false; | 
|  |  | 
|  | static int epoll_fd = -1; | 
|  |  | 
|  | void register_epoll_handler(int fd, void (*fn)()) { | 
|  | epoll_event ev; | 
|  | ev.events = EPOLLIN; | 
|  | ev.data.ptr = reinterpret_cast<void*>(fn); | 
|  | if (epoll_ctl(epoll_fd, EPOLL_CTL_ADD, fd, &ev) == -1) { | 
|  | ERROR("epoll_ctl failed: %s\n", strerror(errno)); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* add_environment - add "key=value" to the current environment */ | 
|  | int add_environment(const char *key, const char *val) | 
|  | { | 
|  | size_t n; | 
|  | size_t key_len = strlen(key); | 
|  |  | 
|  | /* The last environment entry is reserved to terminate the list */ | 
|  | for (n = 0; n < (ARRAY_SIZE(ENV) - 1); n++) { | 
|  |  | 
|  | /* Delete any existing entry for this key */ | 
|  | if (ENV[n] != NULL) { | 
|  | size_t entry_key_len = strcspn(ENV[n], "="); | 
|  | if ((entry_key_len == key_len) && (strncmp(ENV[n], key, entry_key_len) == 0)) { | 
|  | free((char*)ENV[n]); | 
|  | ENV[n] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Add entry if a free slot is available */ | 
|  | if (ENV[n] == NULL) { | 
|  | char* entry; | 
|  | asprintf(&entry, "%s=%s", key, val); | 
|  | ENV[n] = entry; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | ERROR("No env. room to store: '%s':'%s'\n", key, val); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | void property_changed(const char *name, const char *value) | 
|  | { | 
|  | if (property_triggers_enabled) | 
|  | ActionManager::GetInstance().QueuePropertyTrigger(name, value); | 
|  | } | 
|  |  | 
|  | static void restart_processes() | 
|  | { | 
|  | process_needs_restart = 0; | 
|  | ServiceManager::GetInstance(). | 
|  | ForEachServiceWithFlags(SVC_RESTARTING, [] (Service* s) { | 
|  | s->RestartIfNeeded(process_needs_restart); | 
|  | }); | 
|  | } | 
|  |  | 
|  | static void msg_start(const std::string& name) | 
|  | { | 
|  | Service* svc = nullptr; | 
|  | std::vector<std::string> vargs; | 
|  |  | 
|  | size_t colon_pos = name.find(':'); | 
|  | if (colon_pos == std::string::npos) { | 
|  | svc = ServiceManager::GetInstance().FindServiceByName(name); | 
|  | } else { | 
|  | std::string service_name(name.substr(0, colon_pos)); | 
|  | std::string args(name.substr(colon_pos + 1)); | 
|  | vargs = android::base::Split(args, " "); | 
|  |  | 
|  | svc = ServiceManager::GetInstance().FindServiceByName(service_name); | 
|  | } | 
|  |  | 
|  | if (svc) { | 
|  | svc->Start(vargs); | 
|  | } else { | 
|  | ERROR("no such service '%s'\n", name.c_str()); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void msg_stop(const std::string& name) | 
|  | { | 
|  | Service* svc = ServiceManager::GetInstance().FindServiceByName(name); | 
|  |  | 
|  | if (svc) { | 
|  | svc->Stop(); | 
|  | } else { | 
|  | ERROR("no such service '%s'\n", name.c_str()); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void msg_restart(const std::string& name) | 
|  | { | 
|  | Service* svc = ServiceManager::GetInstance().FindServiceByName(name); | 
|  |  | 
|  | if (svc) { | 
|  | svc->Restart(); | 
|  | } else { | 
|  | ERROR("no such service '%s'\n", name.c_str()); | 
|  | } | 
|  | } | 
|  |  | 
|  | void handle_control_message(const std::string& msg, const std::string& arg) | 
|  | { | 
|  | if (msg == "start") { | 
|  | msg_start(arg); | 
|  | } else if (msg == "stop") { | 
|  | msg_stop(arg); | 
|  | } else if (msg == "restart") { | 
|  | msg_restart(arg); | 
|  | } else { | 
|  | ERROR("unknown control msg '%s'\n", msg.c_str()); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int wait_for_coldboot_done_action(const std::vector<std::string>& args) { | 
|  | Timer t; | 
|  |  | 
|  | NOTICE("Waiting for %s...\n", COLDBOOT_DONE); | 
|  | // Any longer than 1s is an unreasonable length of time to delay booting. | 
|  | // If you're hitting this timeout, check that you didn't make your | 
|  | // sepolicy regular expressions too expensive (http://b/19899875). | 
|  | if (wait_for_file(COLDBOOT_DONE, 1)) { | 
|  | ERROR("Timed out waiting for %s\n", COLDBOOT_DONE); | 
|  | } | 
|  |  | 
|  | NOTICE("Waiting for %s took %.2fs.\n", COLDBOOT_DONE, t.duration()); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Writes 512 bytes of output from Hardware RNG (/dev/hw_random, backed | 
|  | * by Linux kernel's hw_random framework) into Linux RNG's via /dev/urandom. | 
|  | * Does nothing if Hardware RNG is not present. | 
|  | * | 
|  | * Since we don't yet trust the quality of Hardware RNG, these bytes are not | 
|  | * mixed into the primary pool of Linux RNG and the entropy estimate is left | 
|  | * unmodified. | 
|  | * | 
|  | * If the HW RNG device /dev/hw_random is present, we require that at least | 
|  | * 512 bytes read from it are written into Linux RNG. QA is expected to catch | 
|  | * devices/configurations where these I/O operations are blocking for a long | 
|  | * time. We do not reboot or halt on failures, as this is a best-effort | 
|  | * attempt. | 
|  | */ | 
|  | static int mix_hwrng_into_linux_rng_action(const std::vector<std::string>& args) | 
|  | { | 
|  | int result = -1; | 
|  | int hwrandom_fd = -1; | 
|  | int urandom_fd = -1; | 
|  | char buf[512]; | 
|  | ssize_t chunk_size; | 
|  | size_t total_bytes_written = 0; | 
|  |  | 
|  | hwrandom_fd = TEMP_FAILURE_RETRY( | 
|  | open("/dev/hw_random", O_RDONLY | O_NOFOLLOW | O_CLOEXEC)); | 
|  | if (hwrandom_fd == -1) { | 
|  | if (errno == ENOENT) { | 
|  | ERROR("/dev/hw_random not found\n"); | 
|  | /* It's not an error to not have a Hardware RNG. */ | 
|  | result = 0; | 
|  | } else { | 
|  | ERROR("Failed to open /dev/hw_random: %s\n", strerror(errno)); | 
|  | } | 
|  | goto ret; | 
|  | } | 
|  |  | 
|  | urandom_fd = TEMP_FAILURE_RETRY( | 
|  | open("/dev/urandom", O_WRONLY | O_NOFOLLOW | O_CLOEXEC)); | 
|  | if (urandom_fd == -1) { | 
|  | ERROR("Failed to open /dev/urandom: %s\n", strerror(errno)); | 
|  | goto ret; | 
|  | } | 
|  |  | 
|  | while (total_bytes_written < sizeof(buf)) { | 
|  | chunk_size = TEMP_FAILURE_RETRY( | 
|  | read(hwrandom_fd, buf, sizeof(buf) - total_bytes_written)); | 
|  | if (chunk_size == -1) { | 
|  | ERROR("Failed to read from /dev/hw_random: %s\n", strerror(errno)); | 
|  | goto ret; | 
|  | } else if (chunk_size == 0) { | 
|  | ERROR("Failed to read from /dev/hw_random: EOF\n"); | 
|  | goto ret; | 
|  | } | 
|  |  | 
|  | chunk_size = TEMP_FAILURE_RETRY(write(urandom_fd, buf, chunk_size)); | 
|  | if (chunk_size == -1) { | 
|  | ERROR("Failed to write to /dev/urandom: %s\n", strerror(errno)); | 
|  | goto ret; | 
|  | } | 
|  | total_bytes_written += chunk_size; | 
|  | } | 
|  |  | 
|  | INFO("Mixed %zu bytes from /dev/hw_random into /dev/urandom", | 
|  | total_bytes_written); | 
|  | result = 0; | 
|  |  | 
|  | ret: | 
|  | if (hwrandom_fd != -1) { | 
|  | close(hwrandom_fd); | 
|  | } | 
|  | if (urandom_fd != -1) { | 
|  | close(urandom_fd); | 
|  | } | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int keychord_init_action(const std::vector<std::string>& args) | 
|  | { | 
|  | keychord_init(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int console_init_action(const std::vector<std::string>& args) | 
|  | { | 
|  | std::string console = property_get("ro.boot.console"); | 
|  | if (!console.empty()) { | 
|  | console_name = "/dev/" + console; | 
|  | } | 
|  |  | 
|  | int fd = open(console_name.c_str(), O_RDWR | O_CLOEXEC); | 
|  | if (fd >= 0) | 
|  | have_console = 1; | 
|  | close(fd); | 
|  |  | 
|  | fd = open("/dev/tty0", O_WRONLY | O_CLOEXEC); | 
|  | if (fd >= 0) { | 
|  | const char *msg; | 
|  | msg = "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n"  // console is 40 cols x 30 lines | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "             A N D R O I D "; | 
|  | write(fd, msg, strlen(msg)); | 
|  | close(fd); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void import_kernel_nv(const std::string& key, const std::string& value, bool for_emulator) { | 
|  | if (key.empty()) return; | 
|  |  | 
|  | if (for_emulator) { | 
|  | // In the emulator, export any kernel option with the "ro.kernel." prefix. | 
|  | property_set(android::base::StringPrintf("ro.kernel.%s", key.c_str()).c_str(), value.c_str()); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (key == "qemu") { | 
|  | strlcpy(qemu, value.c_str(), sizeof(qemu)); | 
|  | } else if (android::base::StartsWith(key, "androidboot.")) { | 
|  | property_set(android::base::StringPrintf("ro.boot.%s", key.c_str() + 12).c_str(), | 
|  | value.c_str()); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void export_kernel_boot_props() { | 
|  | struct { | 
|  | const char *src_prop; | 
|  | const char *dst_prop; | 
|  | const char *default_value; | 
|  | } prop_map[] = { | 
|  | { "ro.boot.serialno",   "ro.serialno",   "", }, | 
|  | { "ro.boot.mode",       "ro.bootmode",   "unknown", }, | 
|  | { "ro.boot.baseband",   "ro.baseband",   "unknown", }, | 
|  | { "ro.boot.bootloader", "ro.bootloader", "unknown", }, | 
|  | { "ro.boot.hardware",   "ro.hardware",   "unknown", }, | 
|  | { "ro.boot.revision",   "ro.revision",   "0", }, | 
|  | }; | 
|  | for (size_t i = 0; i < ARRAY_SIZE(prop_map); i++) { | 
|  | std::string value = property_get(prop_map[i].src_prop); | 
|  | property_set(prop_map[i].dst_prop, (!value.empty()) ? value.c_str() : prop_map[i].default_value); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void process_kernel_dt() { | 
|  | static const char android_dir[] = "/proc/device-tree/firmware/android"; | 
|  |  | 
|  | std::string file_name = android::base::StringPrintf("%s/compatible", android_dir); | 
|  |  | 
|  | std::string dt_file; | 
|  | android::base::ReadFileToString(file_name, &dt_file); | 
|  | if (!dt_file.compare("android,firmware")) { | 
|  | ERROR("firmware/android is not compatible with 'android,firmware'\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | std::unique_ptr<DIR, int(*)(DIR*)>dir(opendir(android_dir), closedir); | 
|  | if (!dir) return; | 
|  |  | 
|  | struct dirent *dp; | 
|  | while ((dp = readdir(dir.get())) != NULL) { | 
|  | if (dp->d_type != DT_REG || !strcmp(dp->d_name, "compatible")) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | file_name = android::base::StringPrintf("%s/%s", android_dir, dp->d_name); | 
|  |  | 
|  | android::base::ReadFileToString(file_name, &dt_file); | 
|  | std::replace(dt_file.begin(), dt_file.end(), ',', '.'); | 
|  |  | 
|  | std::string property_name = android::base::StringPrintf("ro.boot.%s", dp->d_name); | 
|  | property_set(property_name.c_str(), dt_file.c_str()); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void process_kernel_cmdline() { | 
|  | // Don't expose the raw commandline to unprivileged processes. | 
|  | chmod("/proc/cmdline", 0440); | 
|  |  | 
|  | // The first pass does the common stuff, and finds if we are in qemu. | 
|  | // The second pass is only necessary for qemu to export all kernel params | 
|  | // as properties. | 
|  | import_kernel_cmdline(false, import_kernel_nv); | 
|  | if (qemu[0]) import_kernel_cmdline(true, import_kernel_nv); | 
|  | } | 
|  |  | 
|  | static int queue_property_triggers_action(const std::vector<std::string>& args) | 
|  | { | 
|  | ActionManager::GetInstance().QueueAllPropertyTriggers(); | 
|  | /* enable property triggers */ | 
|  | property_triggers_enabled = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void selinux_init_all_handles(void) | 
|  | { | 
|  | sehandle = selinux_android_file_context_handle(); | 
|  | selinux_android_set_sehandle(sehandle); | 
|  | sehandle_prop = selinux_android_prop_context_handle(); | 
|  | } | 
|  |  | 
|  | enum selinux_enforcing_status { SELINUX_PERMISSIVE, SELINUX_ENFORCING }; | 
|  |  | 
|  | static selinux_enforcing_status selinux_status_from_cmdline() { | 
|  | selinux_enforcing_status status = SELINUX_ENFORCING; | 
|  |  | 
|  | import_kernel_cmdline(false, [&](const std::string& key, const std::string& value, bool in_qemu) { | 
|  | if (key == "androidboot.selinux" && value == "permissive") { | 
|  | status = SELINUX_PERMISSIVE; | 
|  | } | 
|  | }); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static bool selinux_is_enforcing(void) | 
|  | { | 
|  | if (ALLOW_PERMISSIVE_SELINUX) { | 
|  | return selinux_status_from_cmdline() == SELINUX_ENFORCING; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | int selinux_reload_policy(void) | 
|  | { | 
|  | INFO("SELinux: Attempting to reload policy files\n"); | 
|  |  | 
|  | if (selinux_android_reload_policy() == -1) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (sehandle) | 
|  | selabel_close(sehandle); | 
|  |  | 
|  | if (sehandle_prop) | 
|  | selabel_close(sehandle_prop); | 
|  |  | 
|  | selinux_init_all_handles(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int audit_callback(void *data, security_class_t /*cls*/, char *buf, size_t len) { | 
|  | snprintf(buf, len, "property=%s", !data ? "NULL" : (char *)data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void security_failure() { | 
|  | ERROR("Security failure; rebooting into recovery mode...\n"); | 
|  | android_reboot(ANDROID_RB_RESTART2, 0, "recovery"); | 
|  | while (true) { pause(); }  // never reached | 
|  | } | 
|  |  | 
|  | static void selinux_initialize(bool in_kernel_domain) { | 
|  | Timer t; | 
|  |  | 
|  | selinux_callback cb; | 
|  | cb.func_log = selinux_klog_callback; | 
|  | selinux_set_callback(SELINUX_CB_LOG, cb); | 
|  | cb.func_audit = audit_callback; | 
|  | selinux_set_callback(SELINUX_CB_AUDIT, cb); | 
|  |  | 
|  | if (in_kernel_domain) { | 
|  | INFO("Loading SELinux policy...\n"); | 
|  | if (selinux_android_load_policy() < 0) { | 
|  | ERROR("failed to load policy: %s\n", strerror(errno)); | 
|  | security_failure(); | 
|  | } | 
|  |  | 
|  | bool kernel_enforcing = (security_getenforce() == 1); | 
|  | bool is_enforcing = selinux_is_enforcing(); | 
|  | if (kernel_enforcing != is_enforcing) { | 
|  | if (security_setenforce(is_enforcing)) { | 
|  | ERROR("security_setenforce(%s) failed: %s\n", | 
|  | is_enforcing ? "true" : "false", strerror(errno)); | 
|  | security_failure(); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (write_file("/sys/fs/selinux/checkreqprot", "0") == -1) { | 
|  | security_failure(); | 
|  | } | 
|  |  | 
|  | NOTICE("(Initializing SELinux %s took %.2fs.)\n", | 
|  | is_enforcing ? "enforcing" : "non-enforcing", t.duration()); | 
|  | } else { | 
|  | selinux_init_all_handles(); | 
|  | } | 
|  | } | 
|  |  | 
|  | int main(int argc, char** argv) { | 
|  | if (!strcmp(basename(argv[0]), "ueventd")) { | 
|  | return ueventd_main(argc, argv); | 
|  | } | 
|  |  | 
|  | if (!strcmp(basename(argv[0]), "watchdogd")) { | 
|  | return watchdogd_main(argc, argv); | 
|  | } | 
|  |  | 
|  | // Clear the umask. | 
|  | umask(0); | 
|  |  | 
|  | add_environment("PATH", _PATH_DEFPATH); | 
|  |  | 
|  | bool is_first_stage = (argc == 1) || (strcmp(argv[1], "--second-stage") != 0); | 
|  |  | 
|  | // Get the basic filesystem setup we need put together in the initramdisk | 
|  | // on / and then we'll let the rc file figure out the rest. | 
|  | if (is_first_stage) { | 
|  | mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755"); | 
|  | mkdir("/dev/pts", 0755); | 
|  | mkdir("/dev/socket", 0755); | 
|  | mount("devpts", "/dev/pts", "devpts", 0, NULL); | 
|  | mount("proc", "/proc", "proc", 0, NULL); | 
|  | mount("sysfs", "/sys", "sysfs", 0, NULL); | 
|  | } | 
|  |  | 
|  | // We must have some place other than / to create the device nodes for | 
|  | // kmsg and null, otherwise we won't be able to remount / read-only | 
|  | // later on. Now that tmpfs is mounted on /dev, we can actually talk | 
|  | // to the outside world. | 
|  | open_devnull_stdio(); | 
|  | klog_init(); | 
|  | klog_set_level(KLOG_NOTICE_LEVEL); | 
|  |  | 
|  | NOTICE("init %s started!\n", is_first_stage ? "first stage" : "second stage"); | 
|  |  | 
|  | if (!is_first_stage) { | 
|  | // Indicate that booting is in progress to background fw loaders, etc. | 
|  | close(open("/dev/.booting", O_WRONLY | O_CREAT | O_CLOEXEC, 0000)); | 
|  |  | 
|  | property_init(); | 
|  |  | 
|  | // If arguments are passed both on the command line and in DT, | 
|  | // properties set in DT always have priority over the command-line ones. | 
|  | process_kernel_dt(); | 
|  | process_kernel_cmdline(); | 
|  |  | 
|  | // Propagate the kernel variables to internal variables | 
|  | // used by init as well as the current required properties. | 
|  | export_kernel_boot_props(); | 
|  | } | 
|  |  | 
|  | // Set up SELinux, including loading the SELinux policy if we're in the kernel domain. | 
|  | selinux_initialize(is_first_stage); | 
|  |  | 
|  | // If we're in the kernel domain, re-exec init to transition to the init domain now | 
|  | // that the SELinux policy has been loaded. | 
|  | if (is_first_stage) { | 
|  | if (restorecon("/init") == -1) { | 
|  | ERROR("restorecon failed: %s\n", strerror(errno)); | 
|  | security_failure(); | 
|  | } | 
|  | char* path = argv[0]; | 
|  | char* args[] = { path, const_cast<char*>("--second-stage"), nullptr }; | 
|  | if (execv(path, args) == -1) { | 
|  | ERROR("execv(\"%s\") failed: %s\n", path, strerror(errno)); | 
|  | security_failure(); | 
|  | } | 
|  | } | 
|  |  | 
|  | // These directories were necessarily created before initial policy load | 
|  | // and therefore need their security context restored to the proper value. | 
|  | // This must happen before /dev is populated by ueventd. | 
|  | NOTICE("Running restorecon...\n"); | 
|  | restorecon("/dev"); | 
|  | restorecon("/dev/socket"); | 
|  | restorecon("/dev/__properties__"); | 
|  | restorecon_recursive("/sys"); | 
|  |  | 
|  | epoll_fd = epoll_create1(EPOLL_CLOEXEC); | 
|  | if (epoll_fd == -1) { | 
|  | ERROR("epoll_create1 failed: %s\n", strerror(errno)); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | signal_handler_init(); | 
|  |  | 
|  | property_load_boot_defaults(); | 
|  | start_property_service(); | 
|  |  | 
|  | init_parse_config("/init.rc"); | 
|  |  | 
|  | ActionManager& am = ActionManager::GetInstance(); | 
|  |  | 
|  | am.QueueEventTrigger("early-init"); | 
|  |  | 
|  | // Queue an action that waits for coldboot done so we know ueventd has set up all of /dev... | 
|  | am.QueueBuiltinAction(wait_for_coldboot_done_action, "wait_for_coldboot_done"); | 
|  | // ... so that we can start queuing up actions that require stuff from /dev. | 
|  | am.QueueBuiltinAction(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng"); | 
|  | am.QueueBuiltinAction(keychord_init_action, "keychord_init"); | 
|  | am.QueueBuiltinAction(console_init_action, "console_init"); | 
|  |  | 
|  | // Trigger all the boot actions to get us started. | 
|  | am.QueueEventTrigger("init"); | 
|  |  | 
|  | // Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random | 
|  | // wasn't ready immediately after wait_for_coldboot_done | 
|  | am.QueueBuiltinAction(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng"); | 
|  |  | 
|  | // Don't mount filesystems or start core system services in charger mode. | 
|  | std::string bootmode = property_get("ro.bootmode"); | 
|  | if (bootmode == "charger") { | 
|  | am.QueueEventTrigger("charger"); | 
|  | } else { | 
|  | am.QueueEventTrigger("late-init"); | 
|  | } | 
|  |  | 
|  | // Run all property triggers based on current state of the properties. | 
|  | am.QueueBuiltinAction(queue_property_triggers_action, "queue_property_triggers"); | 
|  |  | 
|  | while (true) { | 
|  | if (!waiting_for_exec) { | 
|  | am.ExecuteOneCommand(); | 
|  | restart_processes(); | 
|  | } | 
|  |  | 
|  | int timeout = -1; | 
|  | if (process_needs_restart) { | 
|  | timeout = (process_needs_restart - gettime()) * 1000; | 
|  | if (timeout < 0) | 
|  | timeout = 0; | 
|  | } | 
|  |  | 
|  | if (am.HasMoreCommands()) { | 
|  | timeout = 0; | 
|  | } | 
|  |  | 
|  | bootchart_sample(&timeout); | 
|  |  | 
|  | epoll_event ev; | 
|  | int nr = TEMP_FAILURE_RETRY(epoll_wait(epoll_fd, &ev, 1, timeout)); | 
|  | if (nr == -1) { | 
|  | ERROR("epoll_wait failed: %s\n", strerror(errno)); | 
|  | } else if (nr == 1) { | 
|  | ((void (*)()) ev.data.ptr)(); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } |