| /*	$NetBSD: main.c,v 1.48 2003/09/14 12:09:29 jmmv Exp $	*/ | 
 |  | 
 | /*- | 
 |  * Copyright (c) 1991, 1993 | 
 |  *	The Regents of the University of California.  All rights reserved. | 
 |  * | 
 |  * This code is derived from software contributed to Berkeley by | 
 |  * Kenneth Almquist. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer. | 
 |  * 2. Redistributions in binary form must reproduce the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer in the | 
 |  *    documentation and/or other materials provided with the distribution. | 
 |  * 3. Neither the name of the University nor the names of its contributors | 
 |  *    may be used to endorse or promote products derived from this software | 
 |  *    without specific prior written permission. | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND | 
 |  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | 
 |  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
 |  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE | 
 |  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
 |  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
 |  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | 
 |  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | 
 |  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
 |  * SUCH DAMAGE. | 
 |  */ | 
 |  | 
 | #include <sys/cdefs.h> | 
 | #ifndef lint | 
 | __COPYRIGHT("@(#) Copyright (c) 1991, 1993\n\ | 
 | 	The Regents of the University of California.  All rights reserved.\n"); | 
 | #endif /* not lint */ | 
 |  | 
 | #ifndef lint | 
 | #if 0 | 
 | static char sccsid[] = "@(#)main.c	8.7 (Berkeley) 7/19/95"; | 
 | #else | 
 | __RCSID("$NetBSD: main.c,v 1.48 2003/09/14 12:09:29 jmmv Exp $"); | 
 | #endif | 
 | #endif /* not lint */ | 
 |  | 
 | #include <errno.h> | 
 | #include <stdio.h> | 
 | #include <signal.h> | 
 | #include <sys/stat.h> | 
 | #include <unistd.h> | 
 | #include <fcntl.h> | 
 |  | 
 |  | 
 | #include "shell.h" | 
 | #include "main.h" | 
 | #include "options.h" | 
 | #include "output.h" | 
 | #include "parser.h" | 
 | #include "nodes.h" | 
 | #include "expand.h" | 
 | #include "eval.h" | 
 | #include "jobs.h" | 
 | #include "input.h" | 
 | #include "trap.h" | 
 | #include "var.h" | 
 | #include "show.h" | 
 | #include "memalloc.h" | 
 | #include "error.h" | 
 | #include "init.h" | 
 | #include "mystring.h" | 
 | #include "exec.h" | 
 | #include "cd.h" | 
 |  | 
 | #define PROFILE 0 | 
 |  | 
 | int rootpid; | 
 | int rootshell; | 
 | STATIC union node *curcmd; | 
 | STATIC union node *prevcmd; | 
 | #if PROFILE | 
 | short profile_buf[16384]; | 
 | extern int etext(); | 
 | #endif | 
 |  | 
 | STATIC void read_profile(const char *); | 
 | STATIC char *find_dot_file(char *); | 
 | int main(int, char **); | 
 |  | 
 | /* | 
 |  * Main routine.  We initialize things, parse the arguments, execute | 
 |  * profiles if we're a login shell, and then call cmdloop to execute | 
 |  * commands.  The setjmp call sets up the location to jump to when an | 
 |  * exception occurs.  When an exception occurs the variable "state" | 
 |  * is used to figure out how far we had gotten. | 
 |  */ | 
 |  | 
 | int | 
 | main(int argc, char **argv) | 
 | { | 
 | 	struct jmploc jmploc; | 
 | 	struct stackmark smark; | 
 | 	volatile int state; | 
 | 	char *shinit; | 
 |  | 
 | #if PROFILE | 
 | 	monitor(4, etext, profile_buf, sizeof profile_buf, 50); | 
 | #endif | 
 | 	state = 0; | 
 | 	if (setjmp(jmploc.loc)) { | 
 | 		/* | 
 | 		 * When a shell procedure is executed, we raise the | 
 | 		 * exception EXSHELLPROC to clean up before executing | 
 | 		 * the shell procedure. | 
 | 		 */ | 
 | 		switch (exception) { | 
 | 		case EXSHELLPROC: | 
 | 			rootpid = getpid(); | 
 | 			rootshell = 1; | 
 | 			minusc = NULL; | 
 | 			state = 3; | 
 | 			break; | 
 |  | 
 | 		case EXEXEC: | 
 | 			exitstatus = exerrno; | 
 | 			break; | 
 |  | 
 | 		case EXERROR: | 
 | 			exitstatus = 2; | 
 | 			break; | 
 |  | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (exception != EXSHELLPROC) { | 
 | 			if (state == 0 || iflag == 0 || ! rootshell) | 
 | 				exitshell(exitstatus); | 
 | 		} | 
 | 		reset(); | 
 | 		if (exception == EXINT | 
 | #if ATTY | 
 | 		 && (! attyset() || equal(termval(), "emacs")) | 
 | #endif | 
 | 		 ) { | 
 | 			out2c('\n'); | 
 | 			flushout(&errout); | 
 | 		} | 
 | 		popstackmark(&smark); | 
 | 		FORCEINTON;				/* enable interrupts */ | 
 | 		if (state == 1) | 
 | 			goto state1; | 
 | 		else if (state == 2) | 
 | 			goto state2; | 
 | 		else if (state == 3) | 
 | 			goto state3; | 
 | 		else | 
 | 			goto state4; | 
 | 	} | 
 | 	handler = &jmploc; | 
 | #ifdef DEBUG | 
 | #if DEBUG == 2 | 
 | 	debug = 1; | 
 | #endif | 
 | 	opentrace(); | 
 | 	trputs("Shell args:  ");  trargs(argv); | 
 | #endif | 
 | 	rootpid = getpid(); | 
 | 	rootshell = 1; | 
 | 	init(); | 
 | 	setstackmark(&smark); | 
 | 	procargs(argc, argv); | 
 | 	if (argv[0] && argv[0][0] == '-') { | 
 | 		state = 1; | 
 | 		read_profile("/etc/profile"); | 
 | state1: | 
 | 		state = 2; | 
 | 		read_profile(".profile"); | 
 | 	} | 
 | state2: | 
 | 	state = 3; | 
 | 	if (getuid() == geteuid() && getgid() == getegid()) { | 
 | 		if ((shinit = lookupvar("ENV")) != NULL && *shinit != '\0') { | 
 | 			state = 3; | 
 | 			read_profile(shinit); | 
 | 		} | 
 | 	} | 
 | state3: | 
 | 	state = 4; | 
 | 	if (sflag == 0 || minusc) { | 
 | 		static int sigs[] =  { | 
 | 		    SIGINT, SIGQUIT, SIGHUP,  | 
 | #ifdef SIGTSTP | 
 | 		    SIGTSTP, | 
 | #endif | 
 | 		    SIGPIPE | 
 | 		}; | 
 | #define SIGSSIZE (sizeof(sigs)/sizeof(sigs[0])) | 
 | 		int i; | 
 |  | 
 | 		for (i = 0; i < SIGSSIZE; i++) | 
 | 		    setsignal(sigs[i], 0); | 
 | 	} | 
 |  | 
 | 	if (minusc) | 
 | 		evalstring(minusc, 0); | 
 |  | 
 | 	if (sflag || minusc == NULL) { | 
 | state4:	/* XXX ??? - why isn't this before the "if" statement */ | 
 | 		cmdloop(1); | 
 | 	} | 
 | #if PROFILE | 
 | 	monitor(0); | 
 | #endif | 
 | 	exitshell(exitstatus); | 
 | 	/* NOTREACHED */ | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Read and execute commands.  "Top" is nonzero for the top level command | 
 |  * loop; it turns on prompting if the shell is interactive. | 
 |  */ | 
 |  | 
 | void | 
 | cmdloop(int top) | 
 | { | 
 | 	union node *n; | 
 | 	struct stackmark smark; | 
 | 	int inter; | 
 | 	int numeof = 0; | 
 |  | 
 | 	TRACE(("cmdloop(%d) called\n", top)); | 
 | 	setstackmark(&smark); | 
 | 	for (;;) { | 
 | 		if (pendingsigs) | 
 | 			dotrap(); | 
 | 		inter = 0; | 
 | 		if (iflag && top) { | 
 | 			inter = 1; | 
 | 			showjobs(out2, SHOW_CHANGED); | 
 | 			flushout(&errout); | 
 | 		} | 
 | 		n = parsecmd(inter); | 
 | 		/* showtree(n); DEBUG */ | 
 | 		if (n == NEOF) { | 
 | 			if (!top || numeof >= 50) | 
 | 				break; | 
 | 			if (!stoppedjobs()) { | 
 | 				if (!Iflag) | 
 | 					break; | 
 | 				out2str("\nUse \"exit\" to leave shell.\n"); | 
 | 			} | 
 | 			numeof++; | 
 | 		} else if (n != NULL && nflag == 0) { | 
 | 			job_warning = (job_warning == 2) ? 1 : 0; | 
 | 			numeof = 0; | 
 | 			evaltree(n, 0); | 
 | 		} | 
 | 		popstackmark(&smark); | 
 | 		setstackmark(&smark); | 
 | 		if (evalskip == SKIPFILE) { | 
 | 			evalskip = 0; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	popstackmark(&smark); | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* | 
 |  * Read /etc/profile or .profile.  Return on error. | 
 |  */ | 
 |  | 
 | STATIC void | 
 | read_profile(const char *name) | 
 | { | 
 | 	int fd; | 
 | 	int xflag_set = 0; | 
 | 	int vflag_set = 0; | 
 |  | 
 | 	INTOFF; | 
 | 	if ((fd = open(name, O_RDONLY)) >= 0) | 
 | 		setinputfd(fd, 1); | 
 | 	INTON; | 
 | 	if (fd < 0) | 
 | 		return; | 
 | 	/* -q turns off -x and -v just when executing init files */ | 
 | 	if (qflag)  { | 
 | 	    if (xflag) | 
 | 		    xflag = 0, xflag_set = 1; | 
 | 	    if (vflag) | 
 | 		    vflag = 0, vflag_set = 1; | 
 | 	} | 
 | 	cmdloop(0); | 
 | 	if (qflag)  { | 
 | 	    if (xflag_set) | 
 | 		    xflag = 1; | 
 | 	    if (vflag_set) | 
 | 		    vflag = 1; | 
 | 	} | 
 | 	popfile(); | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* | 
 |  * Read a file containing shell functions. | 
 |  */ | 
 |  | 
 | void | 
 | readcmdfile(char *name) | 
 | { | 
 | 	int fd; | 
 |  | 
 | 	INTOFF; | 
 | 	if ((fd = open(name, O_RDONLY)) >= 0) | 
 | 		setinputfd(fd, 1); | 
 | 	else | 
 | 		error("Can't open %s", name); | 
 | 	INTON; | 
 | 	cmdloop(0); | 
 | 	popfile(); | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* | 
 |  * Take commands from a file.  To be compatible we should do a path | 
 |  * search for the file, which is necessary to find sub-commands. | 
 |  */ | 
 |  | 
 |  | 
 | STATIC char * | 
 | find_dot_file(char *basename) | 
 | { | 
 | 	char *fullname; | 
 | 	const char *path = pathval(); | 
 | 	struct stat statb; | 
 |  | 
 | 	/* don't try this for absolute or relative paths */ | 
 | 	if (strchr(basename, '/')) | 
 | 		return basename; | 
 |  | 
 | 	while ((fullname = padvance(&path, basename)) != NULL) { | 
 | 		if ((stat(fullname, &statb) == 0) && S_ISREG(statb.st_mode)) { | 
 | 			/* | 
 | 			 * Don't bother freeing here, since it will | 
 | 			 * be freed by the caller. | 
 | 			 */ | 
 | 			return fullname; | 
 | 		} | 
 | 		stunalloc(fullname); | 
 | 	} | 
 |  | 
 | 	/* not found in the PATH */ | 
 | 	error("%s: not found", basename); | 
 | 	/* NOTREACHED */ | 
 | } | 
 |  | 
 | int | 
 | dotcmd(int argc, char **argv) | 
 | { | 
 | 	exitstatus = 0; | 
 |  | 
 | 	if (argc >= 2) {		/* That's what SVR2 does */ | 
 | 		char *fullname; | 
 | 		struct stackmark smark; | 
 |  | 
 | 		setstackmark(&smark); | 
 | 		fullname = find_dot_file(argv[1]); | 
 | 		setinputfile(fullname, 1); | 
 | 		commandname = fullname; | 
 | 		cmdloop(0); | 
 | 		popfile(); | 
 | 		popstackmark(&smark); | 
 | 	} | 
 | 	return exitstatus; | 
 | } | 
 |  | 
 |  | 
 | int | 
 | exitcmd(int argc, char **argv) | 
 | { | 
 | 	if (stoppedjobs()) | 
 | 		return 0; | 
 | 	if (argc > 1) | 
 | 		exitstatus = number(argv[1]); | 
 | 	exitshell(exitstatus); | 
 | 	/* NOTREACHED */ | 
 | } |