|  | /* | 
|  | * Copyright (C) 2008 The Android Open Source Project | 
|  | * | 
|  | * Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | * you may not use this file except in compliance with the License. | 
|  | * You may obtain a copy of the License at | 
|  | * | 
|  | *      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | * | 
|  | * Unless required by applicable law or agreed to in writing, software | 
|  | * distributed under the License is distributed on an "AS IS" BASIS, | 
|  | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | * See the License for the specific language governing permissions and | 
|  | * limitations under the License. | 
|  | */ | 
|  |  | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <unistd.h> | 
|  | #include <fcntl.h> | 
|  | #include <ctype.h> | 
|  | #include <signal.h> | 
|  | #include <sys/wait.h> | 
|  | #include <sys/mount.h> | 
|  | #include <sys/stat.h> | 
|  | #include <sys/poll.h> | 
|  | #include <errno.h> | 
|  | #include <stdarg.h> | 
|  | #include <mtd/mtd-user.h> | 
|  | #include <sys/types.h> | 
|  | #include <sys/socket.h> | 
|  | #include <sys/un.h> | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | #include <sys/mman.h> | 
|  | #include <selinux/selinux.h> | 
|  | #include <selinux/label.h> | 
|  | #endif | 
|  |  | 
|  | #include <libgen.h> | 
|  |  | 
|  | #include <cutils/list.h> | 
|  | #include <cutils/sockets.h> | 
|  | #include <cutils/iosched_policy.h> | 
|  | #include <private/android_filesystem_config.h> | 
|  | #include <termios.h> | 
|  |  | 
|  | #include <sys/system_properties.h> | 
|  |  | 
|  | #include "devices.h" | 
|  | #include "init.h" | 
|  | #include "log.h" | 
|  | #include "property_service.h" | 
|  | #include "bootchart.h" | 
|  | #include "signal_handler.h" | 
|  | #include "keychords.h" | 
|  | #include "init_parser.h" | 
|  | #include "util.h" | 
|  | #include "ueventd.h" | 
|  | #include "watchdogd.h" | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | struct selabel_handle *sehandle; | 
|  | #endif | 
|  |  | 
|  | static int property_triggers_enabled = 0; | 
|  |  | 
|  | #if BOOTCHART | 
|  | static int   bootchart_count; | 
|  | #endif | 
|  |  | 
|  | static char console[32]; | 
|  | static char bootmode[32]; | 
|  | static char hardware[32]; | 
|  | static unsigned revision = 0; | 
|  | static char qemu[32]; | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | static int selinux_enabled = 1; | 
|  | static int selinux_enforcing = 0; | 
|  | #endif | 
|  |  | 
|  | static struct action *cur_action = NULL; | 
|  | static struct command *cur_command = NULL; | 
|  | static struct listnode *command_queue = NULL; | 
|  |  | 
|  | void notify_service_state(const char *name, const char *state) | 
|  | { | 
|  | char pname[PROP_NAME_MAX]; | 
|  | int len = strlen(name); | 
|  | if ((len + 10) > PROP_NAME_MAX) | 
|  | return; | 
|  | snprintf(pname, sizeof(pname), "init.svc.%s", name); | 
|  | property_set(pname, state); | 
|  | } | 
|  |  | 
|  | static int have_console; | 
|  | static char *console_name = "/dev/console"; | 
|  | static time_t process_needs_restart; | 
|  |  | 
|  | static const char *ENV[32]; | 
|  |  | 
|  | /* add_environment - add "key=value" to the current environment */ | 
|  | int add_environment(const char *key, const char *val) | 
|  | { | 
|  | int n; | 
|  |  | 
|  | for (n = 0; n < 31; n++) { | 
|  | if (!ENV[n]) { | 
|  | size_t len = strlen(key) + strlen(val) + 2; | 
|  | char *entry = malloc(len); | 
|  | snprintf(entry, len, "%s=%s", key, val); | 
|  | ENV[n] = entry; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void zap_stdio(void) | 
|  | { | 
|  | int fd; | 
|  | fd = open("/dev/null", O_RDWR); | 
|  | dup2(fd, 0); | 
|  | dup2(fd, 1); | 
|  | dup2(fd, 2); | 
|  | close(fd); | 
|  | } | 
|  |  | 
|  | static void open_console() | 
|  | { | 
|  | int fd; | 
|  | if ((fd = open(console_name, O_RDWR)) < 0) { | 
|  | fd = open("/dev/null", O_RDWR); | 
|  | } | 
|  | ioctl(fd, TIOCSCTTY, 0); | 
|  | dup2(fd, 0); | 
|  | dup2(fd, 1); | 
|  | dup2(fd, 2); | 
|  | close(fd); | 
|  | } | 
|  |  | 
|  | static void publish_socket(const char *name, int fd) | 
|  | { | 
|  | char key[64] = ANDROID_SOCKET_ENV_PREFIX; | 
|  | char val[64]; | 
|  |  | 
|  | strlcpy(key + sizeof(ANDROID_SOCKET_ENV_PREFIX) - 1, | 
|  | name, | 
|  | sizeof(key) - sizeof(ANDROID_SOCKET_ENV_PREFIX)); | 
|  | snprintf(val, sizeof(val), "%d", fd); | 
|  | add_environment(key, val); | 
|  |  | 
|  | /* make sure we don't close-on-exec */ | 
|  | fcntl(fd, F_SETFD, 0); | 
|  | } | 
|  |  | 
|  | void service_start(struct service *svc, const char *dynamic_args) | 
|  | { | 
|  | struct stat s; | 
|  | pid_t pid; | 
|  | int needs_console; | 
|  | int n; | 
|  | #ifdef HAVE_SELINUX | 
|  | char *scon = NULL; | 
|  | int rc; | 
|  | #endif | 
|  | /* starting a service removes it from the disabled or reset | 
|  | * state and immediately takes it out of the restarting | 
|  | * state if it was in there | 
|  | */ | 
|  | svc->flags &= (~(SVC_DISABLED|SVC_RESTARTING|SVC_RESET)); | 
|  | svc->time_started = 0; | 
|  |  | 
|  | /* running processes require no additional work -- if | 
|  | * they're in the process of exiting, we've ensured | 
|  | * that they will immediately restart on exit, unless | 
|  | * they are ONESHOT | 
|  | */ | 
|  | if (svc->flags & SVC_RUNNING) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | needs_console = (svc->flags & SVC_CONSOLE) ? 1 : 0; | 
|  | if (needs_console && (!have_console)) { | 
|  | ERROR("service '%s' requires console\n", svc->name); | 
|  | svc->flags |= SVC_DISABLED; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (stat(svc->args[0], &s) != 0) { | 
|  | ERROR("cannot find '%s', disabling '%s'\n", svc->args[0], svc->name); | 
|  | svc->flags |= SVC_DISABLED; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if ((!(svc->flags & SVC_ONESHOT)) && dynamic_args) { | 
|  | ERROR("service '%s' must be one-shot to use dynamic args, disabling\n", | 
|  | svc->args[0]); | 
|  | svc->flags |= SVC_DISABLED; | 
|  | return; | 
|  | } | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | if (is_selinux_enabled() > 0) { | 
|  | char *mycon = NULL, *fcon = NULL; | 
|  |  | 
|  | INFO("computing context for service '%s'\n", svc->args[0]); | 
|  | rc = getcon(&mycon); | 
|  | if (rc < 0) { | 
|  | ERROR("could not get context while starting '%s'\n", svc->name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = getfilecon(svc->args[0], &fcon); | 
|  | if (rc < 0) { | 
|  | ERROR("could not get context while starting '%s'\n", svc->name); | 
|  | freecon(mycon); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = security_compute_create(mycon, fcon, string_to_security_class("process"), &scon); | 
|  | freecon(mycon); | 
|  | freecon(fcon); | 
|  | if (rc < 0) { | 
|  | ERROR("could not get context while starting '%s'\n", svc->name); | 
|  | return; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | NOTICE("starting '%s'\n", svc->name); | 
|  |  | 
|  | pid = fork(); | 
|  |  | 
|  | if (pid == 0) { | 
|  | struct socketinfo *si; | 
|  | struct svcenvinfo *ei; | 
|  | char tmp[32]; | 
|  | int fd, sz; | 
|  |  | 
|  | umask(077); | 
|  | if (properties_inited()) { | 
|  | get_property_workspace(&fd, &sz); | 
|  | sprintf(tmp, "%d,%d", dup(fd), sz); | 
|  | add_environment("ANDROID_PROPERTY_WORKSPACE", tmp); | 
|  | } | 
|  |  | 
|  | for (ei = svc->envvars; ei; ei = ei->next) | 
|  | add_environment(ei->name, ei->value); | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | setsockcreatecon(scon); | 
|  | #endif | 
|  |  | 
|  | for (si = svc->sockets; si; si = si->next) { | 
|  | int socket_type = ( | 
|  | !strcmp(si->type, "stream") ? SOCK_STREAM : | 
|  | (!strcmp(si->type, "dgram") ? SOCK_DGRAM : SOCK_SEQPACKET)); | 
|  | int s = create_socket(si->name, socket_type, | 
|  | si->perm, si->uid, si->gid); | 
|  | if (s >= 0) { | 
|  | publish_socket(si->name, s); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | freecon(scon); | 
|  | scon = NULL; | 
|  | setsockcreatecon(NULL); | 
|  | #endif | 
|  |  | 
|  | if (svc->ioprio_class != IoSchedClass_NONE) { | 
|  | if (android_set_ioprio(getpid(), svc->ioprio_class, svc->ioprio_pri)) { | 
|  | ERROR("Failed to set pid %d ioprio = %d,%d: %s\n", | 
|  | getpid(), svc->ioprio_class, svc->ioprio_pri, strerror(errno)); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (needs_console) { | 
|  | setsid(); | 
|  | open_console(); | 
|  | } else { | 
|  | zap_stdio(); | 
|  | } | 
|  |  | 
|  | #if 0 | 
|  | for (n = 0; svc->args[n]; n++) { | 
|  | INFO("args[%d] = '%s'\n", n, svc->args[n]); | 
|  | } | 
|  | for (n = 0; ENV[n]; n++) { | 
|  | INFO("env[%d] = '%s'\n", n, ENV[n]); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | setpgid(0, getpid()); | 
|  |  | 
|  | /* as requested, set our gid, supplemental gids, and uid */ | 
|  | if (svc->gid) { | 
|  | if (setgid(svc->gid) != 0) { | 
|  | ERROR("setgid failed: %s\n", strerror(errno)); | 
|  | _exit(127); | 
|  | } | 
|  | } | 
|  | if (svc->nr_supp_gids) { | 
|  | if (setgroups(svc->nr_supp_gids, svc->supp_gids) != 0) { | 
|  | ERROR("setgroups failed: %s\n", strerror(errno)); | 
|  | _exit(127); | 
|  | } | 
|  | } | 
|  | if (svc->uid) { | 
|  | if (setuid(svc->uid) != 0) { | 
|  | ERROR("setuid failed: %s\n", strerror(errno)); | 
|  | _exit(127); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | if (svc->seclabel) { | 
|  | if (is_selinux_enabled() > 0 && setexeccon(svc->seclabel) < 0) { | 
|  | ERROR("cannot setexeccon('%s'): %s\n", svc->seclabel, strerror(errno)); | 
|  | _exit(127); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (!dynamic_args) { | 
|  | if (execve(svc->args[0], (char**) svc->args, (char**) ENV) < 0) { | 
|  | ERROR("cannot execve('%s'): %s\n", svc->args[0], strerror(errno)); | 
|  | } | 
|  | } else { | 
|  | char *arg_ptrs[INIT_PARSER_MAXARGS+1]; | 
|  | int arg_idx = svc->nargs; | 
|  | char *tmp = strdup(dynamic_args); | 
|  | char *next = tmp; | 
|  | char *bword; | 
|  |  | 
|  | /* Copy the static arguments */ | 
|  | memcpy(arg_ptrs, svc->args, (svc->nargs * sizeof(char *))); | 
|  |  | 
|  | while((bword = strsep(&next, " "))) { | 
|  | arg_ptrs[arg_idx++] = bword; | 
|  | if (arg_idx == INIT_PARSER_MAXARGS) | 
|  | break; | 
|  | } | 
|  | arg_ptrs[arg_idx] = '\0'; | 
|  | execve(svc->args[0], (char**) arg_ptrs, (char**) ENV); | 
|  | } | 
|  | _exit(127); | 
|  | } | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | freecon(scon); | 
|  | #endif | 
|  |  | 
|  | if (pid < 0) { | 
|  | ERROR("failed to start '%s'\n", svc->name); | 
|  | svc->pid = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | svc->time_started = gettime(); | 
|  | svc->pid = pid; | 
|  | svc->flags |= SVC_RUNNING; | 
|  |  | 
|  | if (properties_inited()) | 
|  | notify_service_state(svc->name, "running"); | 
|  | } | 
|  |  | 
|  | /* The how field should be either SVC_DISABLED or SVC_RESET */ | 
|  | static void service_stop_or_reset(struct service *svc, int how) | 
|  | { | 
|  | /* we are no longer running, nor should we | 
|  | * attempt to restart | 
|  | */ | 
|  | svc->flags &= (~(SVC_RUNNING|SVC_RESTARTING)); | 
|  |  | 
|  | if ((how != SVC_DISABLED) && (how != SVC_RESET)) { | 
|  | /* Hrm, an illegal flag.  Default to SVC_DISABLED */ | 
|  | how = SVC_DISABLED; | 
|  | } | 
|  | /* if the service has not yet started, prevent | 
|  | * it from auto-starting with its class | 
|  | */ | 
|  | if (how == SVC_RESET) { | 
|  | svc->flags |= (svc->flags & SVC_RC_DISABLED) ? SVC_DISABLED : SVC_RESET; | 
|  | } else { | 
|  | svc->flags |= how; | 
|  | } | 
|  |  | 
|  | if (svc->pid) { | 
|  | NOTICE("service '%s' is being killed\n", svc->name); | 
|  | kill(-svc->pid, SIGKILL); | 
|  | notify_service_state(svc->name, "stopping"); | 
|  | } else { | 
|  | notify_service_state(svc->name, "stopped"); | 
|  | } | 
|  | } | 
|  |  | 
|  | void service_reset(struct service *svc) | 
|  | { | 
|  | service_stop_or_reset(svc, SVC_RESET); | 
|  | } | 
|  |  | 
|  | void service_stop(struct service *svc) | 
|  | { | 
|  | service_stop_or_reset(svc, SVC_DISABLED); | 
|  | } | 
|  |  | 
|  | void property_changed(const char *name, const char *value) | 
|  | { | 
|  | if (property_triggers_enabled) | 
|  | queue_property_triggers(name, value); | 
|  | } | 
|  |  | 
|  | static void restart_service_if_needed(struct service *svc) | 
|  | { | 
|  | time_t next_start_time = svc->time_started + 5; | 
|  |  | 
|  | if (next_start_time <= gettime()) { | 
|  | svc->flags &= (~SVC_RESTARTING); | 
|  | service_start(svc, NULL); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if ((next_start_time < process_needs_restart) || | 
|  | (process_needs_restart == 0)) { | 
|  | process_needs_restart = next_start_time; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void restart_processes() | 
|  | { | 
|  | process_needs_restart = 0; | 
|  | service_for_each_flags(SVC_RESTARTING, | 
|  | restart_service_if_needed); | 
|  | } | 
|  |  | 
|  | static void msg_start(const char *name) | 
|  | { | 
|  | struct service *svc; | 
|  | char *tmp = NULL; | 
|  | char *args = NULL; | 
|  |  | 
|  | if (!strchr(name, ':')) | 
|  | svc = service_find_by_name(name); | 
|  | else { | 
|  | tmp = strdup(name); | 
|  | args = strchr(tmp, ':'); | 
|  | *args = '\0'; | 
|  | args++; | 
|  |  | 
|  | svc = service_find_by_name(tmp); | 
|  | } | 
|  |  | 
|  | if (svc) { | 
|  | service_start(svc, args); | 
|  | } else { | 
|  | ERROR("no such service '%s'\n", name); | 
|  | } | 
|  | if (tmp) | 
|  | free(tmp); | 
|  | } | 
|  |  | 
|  | static void msg_stop(const char *name) | 
|  | { | 
|  | struct service *svc = service_find_by_name(name); | 
|  |  | 
|  | if (svc) { | 
|  | service_stop(svc); | 
|  | } else { | 
|  | ERROR("no such service '%s'\n", name); | 
|  | } | 
|  | } | 
|  |  | 
|  | void handle_control_message(const char *msg, const char *arg) | 
|  | { | 
|  | if (!strcmp(msg,"start")) { | 
|  | msg_start(arg); | 
|  | } else if (!strcmp(msg,"stop")) { | 
|  | msg_stop(arg); | 
|  | } else if (!strcmp(msg,"restart")) { | 
|  | msg_stop(arg); | 
|  | msg_start(arg); | 
|  | } else { | 
|  | ERROR("unknown control msg '%s'\n", msg); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct command *get_first_command(struct action *act) | 
|  | { | 
|  | struct listnode *node; | 
|  | node = list_head(&act->commands); | 
|  | if (!node || list_empty(&act->commands)) | 
|  | return NULL; | 
|  |  | 
|  | return node_to_item(node, struct command, clist); | 
|  | } | 
|  |  | 
|  | static struct command *get_next_command(struct action *act, struct command *cmd) | 
|  | { | 
|  | struct listnode *node; | 
|  | node = cmd->clist.next; | 
|  | if (!node) | 
|  | return NULL; | 
|  | if (node == &act->commands) | 
|  | return NULL; | 
|  |  | 
|  | return node_to_item(node, struct command, clist); | 
|  | } | 
|  |  | 
|  | static int is_last_command(struct action *act, struct command *cmd) | 
|  | { | 
|  | return (list_tail(&act->commands) == &cmd->clist); | 
|  | } | 
|  |  | 
|  | void execute_one_command(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!cur_action || !cur_command || is_last_command(cur_action, cur_command)) { | 
|  | cur_action = action_remove_queue_head(); | 
|  | cur_command = NULL; | 
|  | if (!cur_action) | 
|  | return; | 
|  | INFO("processing action %p (%s)\n", cur_action, cur_action->name); | 
|  | cur_command = get_first_command(cur_action); | 
|  | } else { | 
|  | cur_command = get_next_command(cur_action, cur_command); | 
|  | } | 
|  |  | 
|  | if (!cur_command) | 
|  | return; | 
|  |  | 
|  | ret = cur_command->func(cur_command->nargs, cur_command->args); | 
|  | INFO("command '%s' r=%d\n", cur_command->args[0], ret); | 
|  | } | 
|  |  | 
|  | static int wait_for_coldboot_done_action(int nargs, char **args) | 
|  | { | 
|  | int ret; | 
|  | INFO("wait for %s\n", coldboot_done); | 
|  | ret = wait_for_file(coldboot_done, COMMAND_RETRY_TIMEOUT); | 
|  | if (ret) | 
|  | ERROR("Timed out waiting for %s\n", coldboot_done); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int keychord_init_action(int nargs, char **args) | 
|  | { | 
|  | keychord_init(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int console_init_action(int nargs, char **args) | 
|  | { | 
|  | int fd; | 
|  | char tmp[PROP_VALUE_MAX]; | 
|  |  | 
|  | if (console[0]) { | 
|  | snprintf(tmp, sizeof(tmp), "/dev/%s", console); | 
|  | console_name = strdup(tmp); | 
|  | } | 
|  |  | 
|  | fd = open(console_name, O_RDWR); | 
|  | if (fd >= 0) | 
|  | have_console = 1; | 
|  | close(fd); | 
|  |  | 
|  | if( load_565rle_image(INIT_IMAGE_FILE) ) { | 
|  | fd = open("/dev/tty0", O_WRONLY); | 
|  | if (fd >= 0) { | 
|  | const char *msg; | 
|  | msg = "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n"  // console is 40 cols x 30 lines | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "\n" | 
|  | "             A N D R O I D "; | 
|  | write(fd, msg, strlen(msg)); | 
|  | close(fd); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void import_kernel_nv(char *name, int for_emulator) | 
|  | { | 
|  | char *value = strchr(name, '='); | 
|  | int name_len = strlen(name); | 
|  |  | 
|  | if (value == 0) return; | 
|  | *value++ = 0; | 
|  | if (name_len == 0) return; | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | if (!strcmp(name,"enforcing")) { | 
|  | selinux_enforcing = atoi(value); | 
|  | } else if (!strcmp(name,"selinux")) { | 
|  | selinux_enabled = atoi(value); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (for_emulator) { | 
|  | /* in the emulator, export any kernel option with the | 
|  | * ro.kernel. prefix */ | 
|  | char buff[PROP_NAME_MAX]; | 
|  | int len = snprintf( buff, sizeof(buff), "ro.kernel.%s", name ); | 
|  |  | 
|  | if (len < (int)sizeof(buff)) | 
|  | property_set( buff, value ); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!strcmp(name,"qemu")) { | 
|  | strlcpy(qemu, value, sizeof(qemu)); | 
|  | } else if (!strncmp(name, "androidboot.", 12) && name_len > 12) { | 
|  | const char *boot_prop_name = name + 12; | 
|  | char prop[PROP_NAME_MAX]; | 
|  | int cnt; | 
|  |  | 
|  | cnt = snprintf(prop, sizeof(prop), "ro.boot.%s", boot_prop_name); | 
|  | if (cnt < PROP_NAME_MAX) | 
|  | property_set(prop, value); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void export_kernel_boot_props(void) | 
|  | { | 
|  | char tmp[PROP_VALUE_MAX]; | 
|  | const char *pval; | 
|  | unsigned i; | 
|  | struct { | 
|  | const char *src_prop; | 
|  | const char *dest_prop; | 
|  | const char *def_val; | 
|  | } prop_map[] = { | 
|  | { "ro.boot.serialno", "ro.serialno", "", }, | 
|  | { "ro.boot.mode", "ro.bootmode", "unknown", }, | 
|  | { "ro.boot.baseband", "ro.baseband", "unknown", }, | 
|  | { "ro.boot.bootloader", "ro.bootloader", "unknown", }, | 
|  | }; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(prop_map); i++) { | 
|  | pval = property_get(prop_map[i].src_prop); | 
|  | property_set(prop_map[i].dest_prop, pval ?: prop_map[i].def_val); | 
|  | } | 
|  |  | 
|  | pval = property_get("ro.boot.console"); | 
|  | if (pval) | 
|  | strlcpy(console, pval, sizeof(console)); | 
|  |  | 
|  | /* save a copy for init's usage during boot */ | 
|  | strlcpy(bootmode, property_get("ro.bootmode"), sizeof(bootmode)); | 
|  |  | 
|  | /* if this was given on kernel command line, override what we read | 
|  | * before (e.g. from /proc/cpuinfo), if anything */ | 
|  | pval = property_get("ro.boot.hardware"); | 
|  | if (pval) | 
|  | strlcpy(hardware, pval, sizeof(hardware)); | 
|  | property_set("ro.hardware", hardware); | 
|  |  | 
|  | snprintf(tmp, PROP_VALUE_MAX, "%d", revision); | 
|  | property_set("ro.revision", tmp); | 
|  |  | 
|  | /* TODO: these are obsolete. We should delete them */ | 
|  | if (!strcmp(bootmode,"factory")) | 
|  | property_set("ro.factorytest", "1"); | 
|  | else if (!strcmp(bootmode,"factory2")) | 
|  | property_set("ro.factorytest", "2"); | 
|  | else | 
|  | property_set("ro.factorytest", "0"); | 
|  | } | 
|  |  | 
|  | static void process_kernel_cmdline(void) | 
|  | { | 
|  | /* don't expose the raw commandline to nonpriv processes */ | 
|  | chmod("/proc/cmdline", 0440); | 
|  |  | 
|  | /* first pass does the common stuff, and finds if we are in qemu. | 
|  | * second pass is only necessary for qemu to export all kernel params | 
|  | * as props. | 
|  | */ | 
|  | import_kernel_cmdline(0, import_kernel_nv); | 
|  | if (qemu[0]) | 
|  | import_kernel_cmdline(1, import_kernel_nv); | 
|  |  | 
|  | /* now propogate the info given on command line to internal variables | 
|  | * used by init as well as the current required properties | 
|  | */ | 
|  | export_kernel_boot_props(); | 
|  | } | 
|  |  | 
|  | static int property_service_init_action(int nargs, char **args) | 
|  | { | 
|  | /* read any property files on system or data and | 
|  | * fire up the property service.  This must happen | 
|  | * after the ro.foo properties are set above so | 
|  | * that /data/local.prop cannot interfere with them. | 
|  | */ | 
|  | start_property_service(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int signal_init_action(int nargs, char **args) | 
|  | { | 
|  | signal_init(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int check_startup_action(int nargs, char **args) | 
|  | { | 
|  | /* make sure we actually have all the pieces we need */ | 
|  | if ((get_property_set_fd() < 0) || | 
|  | (get_signal_fd() < 0)) { | 
|  | ERROR("init startup failure\n"); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | /* signal that we hit this point */ | 
|  | unlink("/dev/.booting"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int queue_property_triggers_action(int nargs, char **args) | 
|  | { | 
|  | queue_all_property_triggers(); | 
|  | /* enable property triggers */ | 
|  | property_triggers_enabled = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if BOOTCHART | 
|  | static int bootchart_init_action(int nargs, char **args) | 
|  | { | 
|  | bootchart_count = bootchart_init(); | 
|  | if (bootchart_count < 0) { | 
|  | ERROR("bootcharting init failure\n"); | 
|  | } else if (bootchart_count > 0) { | 
|  | NOTICE("bootcharting started (period=%d ms)\n", bootchart_count*BOOTCHART_POLLING_MS); | 
|  | } else { | 
|  | NOTICE("bootcharting ignored\n"); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | void selinux_load_policy(void) | 
|  | { | 
|  | const char path_prefix[] = "/sepolicy"; | 
|  | struct selinux_opt seopts[] = { | 
|  | { SELABEL_OPT_PATH, "/file_contexts" } | 
|  | }; | 
|  | char path[PATH_MAX]; | 
|  | int fd, rc, vers; | 
|  | struct stat sb; | 
|  | void *map; | 
|  |  | 
|  | sehandle = NULL; | 
|  | if (!selinux_enabled) { | 
|  | INFO("SELinux:  Disabled by command line option\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | mkdir(SELINUXMNT, 0755); | 
|  | if (mount("selinuxfs", SELINUXMNT, "selinuxfs", 0, NULL)) { | 
|  | if (errno == ENODEV) { | 
|  | /* SELinux not enabled in kernel */ | 
|  | return; | 
|  | } | 
|  | ERROR("SELinux:  Could not mount selinuxfs:  %s\n", | 
|  | strerror(errno)); | 
|  | return; | 
|  | } | 
|  | set_selinuxmnt(SELINUXMNT); | 
|  |  | 
|  | vers = security_policyvers(); | 
|  | if (vers <= 0) { | 
|  | ERROR("SELinux:  Unable to read policy version\n"); | 
|  | return; | 
|  | } | 
|  | INFO("SELinux:  Maximum supported policy version:  %d\n", vers); | 
|  |  | 
|  | snprintf(path, sizeof(path), "%s.%d", | 
|  | path_prefix, vers); | 
|  | fd = open(path, O_RDONLY); | 
|  | while (fd < 0 && errno == ENOENT && --vers) { | 
|  | snprintf(path, sizeof(path), "%s.%d", | 
|  | path_prefix, vers); | 
|  | fd = open(path, O_RDONLY); | 
|  | } | 
|  | if (fd < 0) { | 
|  | ERROR("SELinux:  Could not open %s:  %s\n", | 
|  | path, strerror(errno)); | 
|  | return; | 
|  | } | 
|  | if (fstat(fd, &sb) < 0) { | 
|  | ERROR("SELinux:  Could not stat %s:  %s\n", | 
|  | path, strerror(errno)); | 
|  | return; | 
|  | } | 
|  | map = mmap(NULL, sb.st_size, PROT_READ, MAP_PRIVATE, fd, 0); | 
|  | if (map == MAP_FAILED) { | 
|  | ERROR("SELinux:  Could not map %s:  %s\n", | 
|  | path, strerror(errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = security_load_policy(map, sb.st_size); | 
|  | if (rc < 0) { | 
|  | ERROR("SELinux:  Could not load policy:  %s\n", | 
|  | strerror(errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = security_setenforce(selinux_enforcing); | 
|  | if (rc < 0) { | 
|  | ERROR("SELinux:  Could not set enforcing mode to %s:  %s\n", | 
|  | selinux_enforcing ? "enforcing" : "permissive", strerror(errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | munmap(map, sb.st_size); | 
|  | close(fd); | 
|  | INFO("SELinux: Loaded policy from %s\n", path); | 
|  |  | 
|  | sehandle = selabel_open(SELABEL_CTX_FILE, seopts, 1); | 
|  | if (!sehandle) { | 
|  | ERROR("SELinux:  Could not load file_contexts:  %s\n", | 
|  | strerror(errno)); | 
|  | return; | 
|  | } | 
|  | INFO("SELinux: Loaded file contexts from %s\n", seopts[0].value); | 
|  | return; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | int main(int argc, char **argv) | 
|  | { | 
|  | int fd_count = 0; | 
|  | struct pollfd ufds[4]; | 
|  | char *tmpdev; | 
|  | char* debuggable; | 
|  | char tmp[32]; | 
|  | int property_set_fd_init = 0; | 
|  | int signal_fd_init = 0; | 
|  | int keychord_fd_init = 0; | 
|  | bool is_charger = false; | 
|  |  | 
|  | if (!strcmp(basename(argv[0]), "ueventd")) | 
|  | return ueventd_main(argc, argv); | 
|  |  | 
|  | if (!strcmp(basename(argv[0]), "watchdogd")) | 
|  | return watchdogd_main(argc, argv); | 
|  |  | 
|  | /* clear the umask */ | 
|  | umask(0); | 
|  |  | 
|  | /* Get the basic filesystem setup we need put | 
|  | * together in the initramdisk on / and then we'll | 
|  | * let the rc file figure out the rest. | 
|  | */ | 
|  | mkdir("/dev", 0755); | 
|  | mkdir("/proc", 0755); | 
|  | mkdir("/sys", 0755); | 
|  |  | 
|  | mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755"); | 
|  | mkdir("/dev/pts", 0755); | 
|  | mkdir("/dev/socket", 0755); | 
|  | mount("devpts", "/dev/pts", "devpts", 0, NULL); | 
|  | mount("proc", "/proc", "proc", 0, NULL); | 
|  | mount("sysfs", "/sys", "sysfs", 0, NULL); | 
|  |  | 
|  | /* indicate that booting is in progress to background fw loaders, etc */ | 
|  | close(open("/dev/.booting", O_WRONLY | O_CREAT, 0000)); | 
|  |  | 
|  | /* We must have some place other than / to create the | 
|  | * device nodes for kmsg and null, otherwise we won't | 
|  | * be able to remount / read-only later on. | 
|  | * Now that tmpfs is mounted on /dev, we can actually | 
|  | * talk to the outside world. | 
|  | */ | 
|  | open_devnull_stdio(); | 
|  | klog_init(); | 
|  | property_init(); | 
|  |  | 
|  | get_hardware_name(hardware, &revision); | 
|  |  | 
|  | process_kernel_cmdline(); | 
|  |  | 
|  | #ifdef HAVE_SELINUX | 
|  | INFO("loading selinux policy\n"); | 
|  | selinux_load_policy(); | 
|  | #endif | 
|  |  | 
|  | is_charger = !strcmp(bootmode, "charger"); | 
|  |  | 
|  | INFO("property init\n"); | 
|  | if (!is_charger) | 
|  | property_load_boot_defaults(); | 
|  |  | 
|  | INFO("reading config file\n"); | 
|  | init_parse_config_file("/init.rc"); | 
|  |  | 
|  | action_for_each_trigger("early-init", action_add_queue_tail); | 
|  |  | 
|  | queue_builtin_action(wait_for_coldboot_done_action, "wait_for_coldboot_done"); | 
|  | queue_builtin_action(keychord_init_action, "keychord_init"); | 
|  | queue_builtin_action(console_init_action, "console_init"); | 
|  |  | 
|  | /* execute all the boot actions to get us started */ | 
|  | action_for_each_trigger("init", action_add_queue_tail); | 
|  |  | 
|  | /* skip mounting filesystems in charger mode */ | 
|  | if (!is_charger) { | 
|  | action_for_each_trigger("early-fs", action_add_queue_tail); | 
|  | action_for_each_trigger("fs", action_add_queue_tail); | 
|  | action_for_each_trigger("post-fs", action_add_queue_tail); | 
|  | action_for_each_trigger("post-fs-data", action_add_queue_tail); | 
|  | } | 
|  |  | 
|  | queue_builtin_action(property_service_init_action, "property_service_init"); | 
|  | queue_builtin_action(signal_init_action, "signal_init"); | 
|  | queue_builtin_action(check_startup_action, "check_startup"); | 
|  |  | 
|  | if (is_charger) { | 
|  | action_for_each_trigger("charger", action_add_queue_tail); | 
|  | } else { | 
|  | action_for_each_trigger("early-boot", action_add_queue_tail); | 
|  | action_for_each_trigger("boot", action_add_queue_tail); | 
|  | } | 
|  |  | 
|  | /* run all property triggers based on current state of the properties */ | 
|  | queue_builtin_action(queue_property_triggers_action, "queue_property_triggers"); | 
|  |  | 
|  |  | 
|  | #if BOOTCHART | 
|  | queue_builtin_action(bootchart_init_action, "bootchart_init"); | 
|  | #endif | 
|  |  | 
|  | for(;;) { | 
|  | int nr, i, timeout = -1; | 
|  |  | 
|  | execute_one_command(); | 
|  | restart_processes(); | 
|  |  | 
|  | if (!property_set_fd_init && get_property_set_fd() > 0) { | 
|  | ufds[fd_count].fd = get_property_set_fd(); | 
|  | ufds[fd_count].events = POLLIN; | 
|  | ufds[fd_count].revents = 0; | 
|  | fd_count++; | 
|  | property_set_fd_init = 1; | 
|  | } | 
|  | if (!signal_fd_init && get_signal_fd() > 0) { | 
|  | ufds[fd_count].fd = get_signal_fd(); | 
|  | ufds[fd_count].events = POLLIN; | 
|  | ufds[fd_count].revents = 0; | 
|  | fd_count++; | 
|  | signal_fd_init = 1; | 
|  | } | 
|  | if (!keychord_fd_init && get_keychord_fd() > 0) { | 
|  | ufds[fd_count].fd = get_keychord_fd(); | 
|  | ufds[fd_count].events = POLLIN; | 
|  | ufds[fd_count].revents = 0; | 
|  | fd_count++; | 
|  | keychord_fd_init = 1; | 
|  | } | 
|  |  | 
|  | if (process_needs_restart) { | 
|  | timeout = (process_needs_restart - gettime()) * 1000; | 
|  | if (timeout < 0) | 
|  | timeout = 0; | 
|  | } | 
|  |  | 
|  | if (!action_queue_empty() || cur_action) | 
|  | timeout = 0; | 
|  |  | 
|  | #if BOOTCHART | 
|  | if (bootchart_count > 0) { | 
|  | if (timeout < 0 || timeout > BOOTCHART_POLLING_MS) | 
|  | timeout = BOOTCHART_POLLING_MS; | 
|  | if (bootchart_step() < 0 || --bootchart_count == 0) { | 
|  | bootchart_finish(); | 
|  | bootchart_count = 0; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | nr = poll(ufds, fd_count, timeout); | 
|  | if (nr <= 0) | 
|  | continue; | 
|  |  | 
|  | for (i = 0; i < fd_count; i++) { | 
|  | if (ufds[i].revents == POLLIN) { | 
|  | if (ufds[i].fd == get_property_set_fd()) | 
|  | handle_property_set_fd(); | 
|  | else if (ufds[i].fd == get_keychord_fd()) | 
|  | handle_keychord(); | 
|  | else if (ufds[i].fd == get_signal_fd()) | 
|  | handle_signal(); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } |