| /* | 
 |  * Copyright 2008, The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *     http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 |  | 
 | #include "utility.h" | 
 |  | 
 | #include <errno.h> | 
 | #include <signal.h> | 
 | #include <string.h> | 
 | #include <unistd.h> | 
 | #include <sys/ptrace.h> | 
 | #include <sys/wait.h> | 
 |  | 
 | #include <backtrace/Backtrace.h> | 
 | #include <log/log.h> | 
 | #include <log/logd.h> | 
 |  | 
 | const int sleep_time_usec = 50000;         // 0.05 seconds | 
 | const int max_total_sleep_usec = 10000000; // 10 seconds | 
 |  | 
 | static int write_to_am(int fd, const char* buf, int len) { | 
 |   int to_write = len; | 
 |   while (to_write > 0) { | 
 |     int written = TEMP_FAILURE_RETRY(write(fd, buf + len - to_write, to_write)); | 
 |     if (written < 0) { | 
 |       // hard failure | 
 |       LOG("AM write failure (%d / %s)\n", errno, strerror(errno)); | 
 |       return -1; | 
 |     } | 
 |     to_write -= written; | 
 |   } | 
 |   return len; | 
 | } | 
 |  | 
 | void _LOG(log_t* log, int scopeFlags, const char* fmt, ...) { | 
 |   bool want_tfd_write = log && log->tfd >= 0; | 
 |   bool want_log_write = IS_AT_FAULT(scopeFlags) && (!log || !log->quiet); | 
 |   bool want_amfd_write = IS_AT_FAULT(scopeFlags) && !IS_SENSITIVE(scopeFlags) && log && log->amfd >= 0; | 
 |  | 
 |   char buf[512]; | 
 |   va_list ap; | 
 |   va_start(ap, fmt); | 
 |   vsnprintf(buf, sizeof(buf), fmt, ap); | 
 |   va_end(ap); | 
 |  | 
 |   size_t len = strlen(buf); | 
 |   if (len <= 0) { | 
 |     return; | 
 |   } | 
 |  | 
 |   if (want_tfd_write) { | 
 |     TEMP_FAILURE_RETRY(write(log->tfd, buf, len)); | 
 |   } | 
 |  | 
 |   if (want_log_write) { | 
 |     __android_log_buf_write(LOG_ID_CRASH, ANDROID_LOG_INFO, "DEBUG", buf); | 
 |     if (want_amfd_write) { | 
 |       int written = write_to_am(log->amfd, buf, len); | 
 |       if (written <= 0) { | 
 |         // timeout or other failure on write; stop informing the activity manager | 
 |         log->amfd = -1; | 
 |       } | 
 |     } | 
 |   } | 
 | } | 
 |  | 
 | int wait_for_signal(pid_t tid, int* total_sleep_time_usec) { | 
 |   for (;;) { | 
 |     int status; | 
 |     pid_t n = waitpid(tid, &status, __WALL | WNOHANG); | 
 |     if (n < 0) { | 
 |       if (errno == EAGAIN) | 
 |         continue; | 
 |       LOG("waitpid failed: %s\n", strerror(errno)); | 
 |       return -1; | 
 |     } else if (n > 0) { | 
 |       XLOG("waitpid: n=%d status=%08x\n", n, status); | 
 |       if (WIFSTOPPED(status)) { | 
 |         return WSTOPSIG(status); | 
 |       } else { | 
 |         LOG("unexpected waitpid response: n=%d, status=%08x\n", n, status); | 
 |         return -1; | 
 |       } | 
 |     } | 
 |  | 
 |     if (*total_sleep_time_usec > max_total_sleep_usec) { | 
 |       LOG("timed out waiting for tid=%d to die\n", tid); | 
 |       return -1; | 
 |     } | 
 |  | 
 |     // not ready yet | 
 |     XLOG("not ready yet\n"); | 
 |     usleep(sleep_time_usec); | 
 |     *total_sleep_time_usec += sleep_time_usec; | 
 |   } | 
 | } | 
 |  | 
 | void wait_for_stop(pid_t tid, int* total_sleep_time_usec) { | 
 |   siginfo_t si; | 
 |   while (TEMP_FAILURE_RETRY(ptrace(PTRACE_GETSIGINFO, tid, 0, &si)) < 0 && errno == ESRCH) { | 
 |     if (*total_sleep_time_usec > max_total_sleep_usec) { | 
 |       LOG("timed out waiting for tid=%d to stop\n", tid); | 
 |       break; | 
 |     } | 
 |  | 
 |     usleep(sleep_time_usec); | 
 |     *total_sleep_time_usec += sleep_time_usec; | 
 |   } | 
 | } | 
 |  | 
 | #if defined (__mips__) | 
 | #define DUMP_MEMORY_AS_ASCII 1 | 
 | #else | 
 | #define DUMP_MEMORY_AS_ASCII 0 | 
 | #endif | 
 |  | 
 | void dump_memory(log_t* log, pid_t tid, uintptr_t addr, int scope_flags) { | 
 |     char code_buffer[64]; | 
 |     char ascii_buffer[32]; | 
 |     uintptr_t p, end; | 
 |  | 
 |     p = addr & ~(sizeof(long) - 1); | 
 |     /* Dump 32 bytes before addr */ | 
 |     p -= 32; | 
 |     if (p > addr) { | 
 |         /* catch underflow */ | 
 |         p = 0; | 
 |     } | 
 |     /* Dump 256 bytes */ | 
 |     end = p + 256; | 
 |     /* catch overflow; 'end - p' has to be multiples of 16 */ | 
 |     while (end < p) { | 
 |         end -= 16; | 
 |     } | 
 |  | 
 |     /* Dump the code around PC as: | 
 |      *  addr             contents                           ascii | 
 |      *  0000000000008d34 ef000000e8bd0090 e1b00000512fff1e  ............../Q | 
 |      *  0000000000008d44 ea00b1f9e92d0090 e3a070fcef000000  ......-..p...... | 
 |      * On 32-bit machines, there are still 16 bytes per line but addresses and | 
 |      * words are of course presented differently. | 
 |      */ | 
 |     while (p < end) { | 
 |         char* asc_out = ascii_buffer; | 
 |  | 
 |         int len = snprintf(code_buffer, sizeof(code_buffer), "%" PRIPTR " ", p); | 
 |  | 
 |         for (size_t i = 0; i < 16/sizeof(long); i++) { | 
 |             long data = ptrace(PTRACE_PEEKTEXT, tid, (void*)p, NULL); | 
 |             if (data == -1 && errno != 0) { | 
 |                 // ptrace failed, probably because we're dumping memory in an | 
 |                 // unmapped or inaccessible page. | 
 | #ifdef __LP64__ | 
 |                 len += sprintf(code_buffer + len, "---------------- "); | 
 | #else | 
 |                 len += sprintf(code_buffer + len, "-------- "); | 
 | #endif | 
 |             } else { | 
 |                 len += sprintf(code_buffer + len, "%" PRIPTR " ", | 
 |                                static_cast<uintptr_t>(data)); | 
 |             } | 
 |  | 
 | #if DUMP_MEMORY_AS_ASCII | 
 |             for (size_t j = 0; j < sizeof(long); j++) { | 
 |                 /* | 
 |                  * Our isprint() allows high-ASCII characters that display | 
 |                  * differently (often badly) in different viewers, so we | 
 |                  * just use a simpler test. | 
 |                  */ | 
 |                 char val = (data >> (j*8)) & 0xff; | 
 |                 if (val >= 0x20 && val < 0x7f) { | 
 |                     *asc_out++ = val; | 
 |                 } else { | 
 |                     *asc_out++ = '.'; | 
 |                 } | 
 |             } | 
 | #endif | 
 |             p += sizeof(long); | 
 |         } | 
 |         *asc_out = '\0'; | 
 |         _LOG(log, scope_flags, "    %s %s\n", code_buffer, ascii_buffer); | 
 |     } | 
 | } |