|  | /* | 
|  | * Copyright (C) 2008 The Android Open Source Project | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | *  * Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | *  * Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in | 
|  | *    the documentation and/or other materials provided with the | 
|  | *    distribution. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS | 
|  | * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE | 
|  | * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | 
|  | * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | 
|  | * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED | 
|  | * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | 
|  | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT | 
|  | * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
|  | * SUCH DAMAGE. | 
|  | */ | 
|  |  | 
|  | #include <ctype.h> | 
|  | #include <dirent.h> | 
|  | #include <errno.h> | 
|  | #include <fcntl.h> | 
|  | #include <pthread.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <sys/ioctl.h> | 
|  | #include <sys/stat.h> | 
|  | #include <sys/types.h> | 
|  | #include <unistd.h> | 
|  |  | 
|  | #include <linux/usbdevice_fs.h> | 
|  | #include <linux/version.h> | 
|  | #include <linux/usb/ch9.h> | 
|  |  | 
|  | #include <chrono> | 
|  | #include <memory> | 
|  | #include <thread> | 
|  |  | 
|  | #include "fastboot.h" | 
|  | #include "usb.h" | 
|  |  | 
|  | using namespace std::chrono_literals; | 
|  |  | 
|  | #define MAX_RETRIES 5 | 
|  |  | 
|  | /* Timeout in seconds for usb_wait_for_disconnect. | 
|  | * It doesn't usually take long for a device to disconnect (almost always | 
|  | * under 2 seconds) but we'll time out after 3 seconds just in case. | 
|  | */ | 
|  | #define WAIT_FOR_DISCONNECT_TIMEOUT  3 | 
|  |  | 
|  | #ifdef TRACE_USB | 
|  | #define DBG1(x...) fprintf(stderr, x) | 
|  | #define DBG(x...) fprintf(stderr, x) | 
|  | #else | 
|  | #define DBG(x...) | 
|  | #define DBG1(x...) | 
|  | #endif | 
|  |  | 
|  | // Kernels before 3.3 have a 16KiB transfer limit. That limit was replaced | 
|  | // with a 16MiB global limit in 3.3, but each URB submitted required a | 
|  | // contiguous kernel allocation, so you would get ENOMEM if you tried to | 
|  | // send something larger than the biggest available contiguous kernel | 
|  | // memory region. 256KiB contiguous allocations are generally not reliable | 
|  | // on a device kernel that has been running for a while fragmenting its | 
|  | // memory, but that shouldn't be a problem for fastboot on the host. | 
|  | // In 3.6, the contiguous buffer limit was removed by allocating multiple | 
|  | // 16KiB chunks and having the USB driver stitch them back together while | 
|  | // transmitting using a scatter-gather list, so 256KiB bulk transfers should | 
|  | // be reliable. | 
|  | // 256KiB seems to work, but 1MiB bulk transfers lock up my z620 with a 3.13 | 
|  | // kernel. | 
|  | #define MAX_USBFS_BULK_SIZE (16 * 1024) | 
|  |  | 
|  | struct usb_handle | 
|  | { | 
|  | char fname[64]; | 
|  | int desc; | 
|  | unsigned char ep_in; | 
|  | unsigned char ep_out; | 
|  | }; | 
|  |  | 
|  | class LinuxUsbTransport : public Transport { | 
|  | public: | 
|  | explicit LinuxUsbTransport(std::unique_ptr<usb_handle> handle) : handle_(std::move(handle)) {} | 
|  | ~LinuxUsbTransport() override = default; | 
|  |  | 
|  | ssize_t Read(void* data, size_t len) override; | 
|  | ssize_t Write(const void* data, size_t len) override; | 
|  | int Close() override; | 
|  | int WaitForDisconnect() override; | 
|  |  | 
|  | private: | 
|  | std::unique_ptr<usb_handle> handle_; | 
|  |  | 
|  | DISALLOW_COPY_AND_ASSIGN(LinuxUsbTransport); | 
|  | }; | 
|  |  | 
|  | /* True if name isn't a valid name for a USB device in /sys/bus/usb/devices. | 
|  | * Device names are made up of numbers, dots, and dashes, e.g., '7-1.5'. | 
|  | * We reject interfaces (e.g., '7-1.5:1.0') and host controllers (e.g. 'usb1'). | 
|  | * The name must also start with a digit, to disallow '.' and '..' | 
|  | */ | 
|  | static inline int badname(const char *name) | 
|  | { | 
|  | if (!isdigit(*name)) | 
|  | return 1; | 
|  | while(*++name) { | 
|  | if(!isdigit(*name) && *name != '.' && *name != '-') | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int check(void *_desc, int len, unsigned type, int size) | 
|  | { | 
|  | struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)_desc; | 
|  |  | 
|  | if(len < size) return -1; | 
|  | if(hdr->bLength < size) return -1; | 
|  | if(hdr->bLength > len) return -1; | 
|  | if(hdr->bDescriptorType != type) return -1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int filter_usb_device(char* sysfs_name, | 
|  | char *ptr, int len, int writable, | 
|  | ifc_match_func callback, | 
|  | int *ept_in_id, int *ept_out_id, int *ifc_id) | 
|  | { | 
|  | struct usb_device_descriptor *dev; | 
|  | struct usb_config_descriptor *cfg; | 
|  | struct usb_interface_descriptor *ifc; | 
|  | struct usb_endpoint_descriptor *ept; | 
|  | struct usb_ifc_info info; | 
|  |  | 
|  | int in, out; | 
|  | unsigned i; | 
|  | unsigned e; | 
|  |  | 
|  | if (check(ptr, len, USB_DT_DEVICE, USB_DT_DEVICE_SIZE)) | 
|  | return -1; | 
|  | dev = (struct usb_device_descriptor *)ptr; | 
|  | len -= dev->bLength; | 
|  | ptr += dev->bLength; | 
|  |  | 
|  | if (check(ptr, len, USB_DT_CONFIG, USB_DT_CONFIG_SIZE)) | 
|  | return -1; | 
|  | cfg = (struct usb_config_descriptor *)ptr; | 
|  | len -= cfg->bLength; | 
|  | ptr += cfg->bLength; | 
|  |  | 
|  | info.dev_vendor = dev->idVendor; | 
|  | info.dev_product = dev->idProduct; | 
|  | info.dev_class = dev->bDeviceClass; | 
|  | info.dev_subclass = dev->bDeviceSubClass; | 
|  | info.dev_protocol = dev->bDeviceProtocol; | 
|  | info.writable = writable; | 
|  |  | 
|  | snprintf(info.device_path, sizeof(info.device_path), "usb:%s", sysfs_name); | 
|  |  | 
|  | /* Read device serial number (if there is one). | 
|  | * We read the serial number from sysfs, since it's faster and more | 
|  | * reliable than issuing a control pipe read, and also won't | 
|  | * cause problems for devices which don't like getting descriptor | 
|  | * requests while they're in the middle of flashing. | 
|  | */ | 
|  | info.serial_number[0] = '\0'; | 
|  | if (dev->iSerialNumber) { | 
|  | char path[80]; | 
|  | int fd; | 
|  |  | 
|  | snprintf(path, sizeof(path), | 
|  | "/sys/bus/usb/devices/%s/serial", sysfs_name); | 
|  | path[sizeof(path) - 1] = '\0'; | 
|  |  | 
|  | fd = open(path, O_RDONLY); | 
|  | if (fd >= 0) { | 
|  | int chars_read = read(fd, info.serial_number, | 
|  | sizeof(info.serial_number) - 1); | 
|  | close(fd); | 
|  |  | 
|  | if (chars_read <= 0) | 
|  | info.serial_number[0] = '\0'; | 
|  | else if (info.serial_number[chars_read - 1] == '\n') { | 
|  | // strip trailing newline | 
|  | info.serial_number[chars_read - 1] = '\0'; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | for(i = 0; i < cfg->bNumInterfaces; i++) { | 
|  |  | 
|  | while (len > 0) { | 
|  | struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)ptr; | 
|  | if (check(hdr, len, USB_DT_INTERFACE, USB_DT_INTERFACE_SIZE) == 0) | 
|  | break; | 
|  | len -= hdr->bLength; | 
|  | ptr += hdr->bLength; | 
|  | } | 
|  |  | 
|  | if (len <= 0) | 
|  | return -1; | 
|  |  | 
|  | ifc = (struct usb_interface_descriptor *)ptr; | 
|  | len -= ifc->bLength; | 
|  | ptr += ifc->bLength; | 
|  |  | 
|  | in = -1; | 
|  | out = -1; | 
|  | info.ifc_class = ifc->bInterfaceClass; | 
|  | info.ifc_subclass = ifc->bInterfaceSubClass; | 
|  | info.ifc_protocol = ifc->bInterfaceProtocol; | 
|  |  | 
|  | for(e = 0; e < ifc->bNumEndpoints; e++) { | 
|  | while (len > 0) { | 
|  | struct usb_descriptor_header *hdr = (struct usb_descriptor_header *)ptr; | 
|  | if (check(hdr, len, USB_DT_ENDPOINT, USB_DT_ENDPOINT_SIZE) == 0) | 
|  | break; | 
|  | len -= hdr->bLength; | 
|  | ptr += hdr->bLength; | 
|  | } | 
|  | if (len < 0) { | 
|  | break; | 
|  | } | 
|  |  | 
|  | ept = (struct usb_endpoint_descriptor *)ptr; | 
|  | len -= ept->bLength; | 
|  | ptr += ept->bLength; | 
|  |  | 
|  | if((ept->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) | 
|  | continue; | 
|  |  | 
|  | if(ept->bEndpointAddress & USB_ENDPOINT_DIR_MASK) { | 
|  | in = ept->bEndpointAddress; | 
|  | } else { | 
|  | out = ept->bEndpointAddress; | 
|  | } | 
|  |  | 
|  | // For USB 3.0 devices skip the SS Endpoint Companion descriptor | 
|  | if (check((struct usb_descriptor_hdr *)ptr, len, | 
|  | USB_DT_SS_ENDPOINT_COMP, USB_DT_SS_EP_COMP_SIZE) == 0) { | 
|  | len -= USB_DT_SS_EP_COMP_SIZE; | 
|  | ptr += USB_DT_SS_EP_COMP_SIZE; | 
|  | } | 
|  | } | 
|  |  | 
|  | info.has_bulk_in = (in != -1); | 
|  | info.has_bulk_out = (out != -1); | 
|  |  | 
|  | if(callback(&info) == 0) { | 
|  | *ept_in_id = in; | 
|  | *ept_out_id = out; | 
|  | *ifc_id = ifc->bInterfaceNumber; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int read_sysfs_string(const char *sysfs_name, const char *sysfs_node, | 
|  | char* buf, int bufsize) | 
|  | { | 
|  | char path[80]; | 
|  | int fd, n; | 
|  |  | 
|  | snprintf(path, sizeof(path), | 
|  | "/sys/bus/usb/devices/%s/%s", sysfs_name, sysfs_node); | 
|  | path[sizeof(path) - 1] = '\0'; | 
|  |  | 
|  | fd = open(path, O_RDONLY); | 
|  | if (fd < 0) | 
|  | return -1; | 
|  |  | 
|  | n = read(fd, buf, bufsize - 1); | 
|  | close(fd); | 
|  |  | 
|  | if (n < 0) | 
|  | return -1; | 
|  |  | 
|  | buf[n] = '\0'; | 
|  |  | 
|  | return n; | 
|  | } | 
|  |  | 
|  | static int read_sysfs_number(const char *sysfs_name, const char *sysfs_node) | 
|  | { | 
|  | char buf[16]; | 
|  | int value; | 
|  |  | 
|  | if (read_sysfs_string(sysfs_name, sysfs_node, buf, sizeof(buf)) < 0) | 
|  | return -1; | 
|  |  | 
|  | if (sscanf(buf, "%d", &value) != 1) | 
|  | return -1; | 
|  |  | 
|  | return value; | 
|  | } | 
|  |  | 
|  | /* Given the name of a USB device in sysfs, get the name for the same | 
|  | * device in devfs. Returns 0 for success, -1 for failure. | 
|  | */ | 
|  | static int convert_to_devfs_name(const char* sysfs_name, | 
|  | char* devname, int devname_size) | 
|  | { | 
|  | int busnum, devnum; | 
|  |  | 
|  | busnum = read_sysfs_number(sysfs_name, "busnum"); | 
|  | if (busnum < 0) | 
|  | return -1; | 
|  |  | 
|  | devnum = read_sysfs_number(sysfs_name, "devnum"); | 
|  | if (devnum < 0) | 
|  | return -1; | 
|  |  | 
|  | snprintf(devname, devname_size, "/dev/bus/usb/%03d/%03d", busnum, devnum); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static std::unique_ptr<usb_handle> find_usb_device(const char* base, ifc_match_func callback) | 
|  | { | 
|  | std::unique_ptr<usb_handle> usb; | 
|  | char devname[64]; | 
|  | char desc[1024]; | 
|  | int n, in, out, ifc; | 
|  |  | 
|  | struct dirent *de; | 
|  | int fd; | 
|  | int writable; | 
|  |  | 
|  | std::unique_ptr<DIR, decltype(&closedir)> busdir(opendir(base), closedir); | 
|  | if (busdir == 0) return 0; | 
|  |  | 
|  | while ((de = readdir(busdir.get())) && (usb == nullptr)) { | 
|  | if (badname(de->d_name)) continue; | 
|  |  | 
|  | if (!convert_to_devfs_name(de->d_name, devname, sizeof(devname))) { | 
|  |  | 
|  | //            DBG("[ scanning %s ]\n", devname); | 
|  | writable = 1; | 
|  | if ((fd = open(devname, O_RDWR)) < 0) { | 
|  | // Check if we have read-only access, so we can give a helpful | 
|  | // diagnostic like "adb devices" does. | 
|  | writable = 0; | 
|  | if ((fd = open(devname, O_RDONLY)) < 0) { | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | n = read(fd, desc, sizeof(desc)); | 
|  |  | 
|  | if (filter_usb_device(de->d_name, desc, n, writable, callback, &in, &out, &ifc) == 0) { | 
|  | usb.reset(new usb_handle()); | 
|  | strcpy(usb->fname, devname); | 
|  | usb->ep_in = in; | 
|  | usb->ep_out = out; | 
|  | usb->desc = fd; | 
|  |  | 
|  | n = ioctl(fd, USBDEVFS_CLAIMINTERFACE, &ifc); | 
|  | if (n != 0) { | 
|  | close(fd); | 
|  | usb.reset(); | 
|  | continue; | 
|  | } | 
|  | } else { | 
|  | close(fd); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return usb; | 
|  | } | 
|  |  | 
|  | ssize_t LinuxUsbTransport::Write(const void* _data, size_t len) | 
|  | { | 
|  | unsigned char *data = (unsigned char*) _data; | 
|  | unsigned count = 0; | 
|  | struct usbdevfs_bulktransfer bulk; | 
|  | int n; | 
|  |  | 
|  | if (handle_->ep_out == 0 || handle_->desc == -1) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | do { | 
|  | int xfer; | 
|  | xfer = (len > MAX_USBFS_BULK_SIZE) ? MAX_USBFS_BULK_SIZE : len; | 
|  |  | 
|  | bulk.ep = handle_->ep_out; | 
|  | bulk.len = xfer; | 
|  | bulk.data = data; | 
|  | bulk.timeout = 0; | 
|  |  | 
|  | n = ioctl(handle_->desc, USBDEVFS_BULK, &bulk); | 
|  | if(n != xfer) { | 
|  | DBG("ERROR: n = %d, errno = %d (%s)\n", | 
|  | n, errno, strerror(errno)); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | count += xfer; | 
|  | len -= xfer; | 
|  | data += xfer; | 
|  | } while(len > 0); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | ssize_t LinuxUsbTransport::Read(void* _data, size_t len) | 
|  | { | 
|  | unsigned char *data = (unsigned char*) _data; | 
|  | unsigned count = 0; | 
|  | struct usbdevfs_bulktransfer bulk; | 
|  | int n, retry; | 
|  |  | 
|  | if (handle_->ep_in == 0 || handle_->desc == -1) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | while (len > 0) { | 
|  | int xfer = (len > MAX_USBFS_BULK_SIZE) ? MAX_USBFS_BULK_SIZE : len; | 
|  |  | 
|  | bulk.ep = handle_->ep_in; | 
|  | bulk.len = xfer; | 
|  | bulk.data = data; | 
|  | bulk.timeout = 0; | 
|  | retry = 0; | 
|  |  | 
|  | do { | 
|  | DBG("[ usb read %d fd = %d], fname=%s\n", xfer, handle_->desc, handle_->fname); | 
|  | n = ioctl(handle_->desc, USBDEVFS_BULK, &bulk); | 
|  | DBG("[ usb read %d ] = %d, fname=%s, Retry %d \n", xfer, n, handle_->fname, retry); | 
|  |  | 
|  | if (n < 0) { | 
|  | DBG1("ERROR: n = %d, errno = %d (%s)\n",n, errno, strerror(errno)); | 
|  | if (++retry > MAX_RETRIES) return -1; | 
|  | std::this_thread::sleep_for(1s); | 
|  | } | 
|  | } while (n < 0); | 
|  |  | 
|  | count += n; | 
|  | len -= n; | 
|  | data += n; | 
|  |  | 
|  | if(n < xfer) { | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | int LinuxUsbTransport::Close() | 
|  | { | 
|  | int fd; | 
|  |  | 
|  | fd = handle_->desc; | 
|  | handle_->desc = -1; | 
|  | if(fd >= 0) { | 
|  | close(fd); | 
|  | DBG("[ usb closed %d ]\n", fd); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | Transport* usb_open(ifc_match_func callback) | 
|  | { | 
|  | std::unique_ptr<usb_handle> handle = find_usb_device("/sys/bus/usb/devices", callback); | 
|  | return handle ? new LinuxUsbTransport(std::move(handle)) : nullptr; | 
|  | } | 
|  |  | 
|  | /* Wait for the system to notice the device is gone, so that a subsequent | 
|  | * fastboot command won't try to access the device before it's rebooted. | 
|  | * Returns 0 for success, -1 for timeout. | 
|  | */ | 
|  | int LinuxUsbTransport::WaitForDisconnect() | 
|  | { | 
|  | double deadline = now() + WAIT_FOR_DISCONNECT_TIMEOUT; | 
|  | while (now() < deadline) { | 
|  | if (access(handle_->fname, F_OK)) return 0; | 
|  | std::this_thread::sleep_for(50ms); | 
|  | } | 
|  | return -1; | 
|  | } |