| /* | 
 |  * Copyright (C) 2008 The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *    http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Read-only access to Zip archives, with minimal heap allocation. | 
 |  */ | 
 |  | 
 | #include <assert.h> | 
 | #include <errno.h> | 
 | #include <fcntl.h> | 
 | #include <inttypes.h> | 
 | #include <limits.h> | 
 | #include <stdlib.h> | 
 | #include <string.h> | 
 | #include <unistd.h> | 
 |  | 
 | #include <memory> | 
 | #include <vector> | 
 |  | 
 | #include "base/macros.h"  // TEMP_FAILURE_RETRY may or may not be in unistd | 
 | #include "base/memory.h" | 
 | #include "log/log.h" | 
 | #include "utils/Compat.h" | 
 | #include "utils/FileMap.h" | 
 | #include "zlib.h" | 
 |  | 
 | #include "entry_name_utils-inl.h" | 
 | #include "ziparchive/zip_archive.h" | 
 |  | 
 | using android::base::get_unaligned; | 
 |  | 
 | // This is for windows. If we don't open a file in binary mode, weird | 
 | // things will happen. | 
 | #ifndef O_BINARY | 
 | #define O_BINARY 0 | 
 | #endif | 
 |  | 
 | // The "end of central directory" (EOCD) record. Each archive | 
 | // contains exactly once such record which appears at the end of | 
 | // the archive. It contains archive wide information like the | 
 | // number of entries in the archive and the offset to the central | 
 | // directory of the offset. | 
 | struct EocdRecord { | 
 |   static const uint32_t kSignature = 0x06054b50; | 
 |  | 
 |   // End of central directory signature, should always be | 
 |   // |kSignature|. | 
 |   uint32_t eocd_signature; | 
 |   // The number of the current "disk", i.e, the "disk" that this | 
 |   // central directory is on. | 
 |   // | 
 |   // This implementation assumes that each archive spans a single | 
 |   // disk only. i.e, that disk_num == 1. | 
 |   uint16_t disk_num; | 
 |   // The disk where the central directory starts. | 
 |   // | 
 |   // This implementation assumes that each archive spans a single | 
 |   // disk only. i.e, that cd_start_disk == 1. | 
 |   uint16_t cd_start_disk; | 
 |   // The number of central directory records on this disk. | 
 |   // | 
 |   // This implementation assumes that each archive spans a single | 
 |   // disk only. i.e, that num_records_on_disk == num_records. | 
 |   uint16_t num_records_on_disk; | 
 |   // The total number of central directory records. | 
 |   uint16_t num_records; | 
 |   // The size of the central directory (in bytes). | 
 |   uint32_t cd_size; | 
 |   // The offset of the start of the central directory, relative | 
 |   // to the start of the file. | 
 |   uint32_t cd_start_offset; | 
 |   // Length of the central directory comment. | 
 |   uint16_t comment_length; | 
 |  private: | 
 |   DISALLOW_IMPLICIT_CONSTRUCTORS(EocdRecord); | 
 | } __attribute__((packed)); | 
 |  | 
 | // A structure representing the fixed length fields for a single | 
 | // record in the central directory of the archive. In addition to | 
 | // the fixed length fields listed here, each central directory | 
 | // record contains a variable length "file_name" and "extra_field" | 
 | // whose lengths are given by |file_name_length| and |extra_field_length| | 
 | // respectively. | 
 | struct CentralDirectoryRecord { | 
 |   static const uint32_t kSignature = 0x02014b50; | 
 |  | 
 |   // The start of record signature. Must be |kSignature|. | 
 |   uint32_t record_signature; | 
 |   // Tool version. Ignored by this implementation. | 
 |   uint16_t version_made_by; | 
 |   // Tool version. Ignored by this implementation. | 
 |   uint16_t version_needed; | 
 |   // The "general purpose bit flags" for this entry. The only | 
 |   // flag value that we currently check for is the "data descriptor" | 
 |   // flag. | 
 |   uint16_t gpb_flags; | 
 |   // The compression method for this entry, one of |kCompressStored| | 
 |   // and |kCompressDeflated|. | 
 |   uint16_t compression_method; | 
 |   // The file modification time and date for this entry. | 
 |   uint16_t last_mod_time; | 
 |   uint16_t last_mod_date; | 
 |   // The CRC-32 checksum for this entry. | 
 |   uint32_t crc32; | 
 |   // The compressed size (in bytes) of this entry. | 
 |   uint32_t compressed_size; | 
 |   // The uncompressed size (in bytes) of this entry. | 
 |   uint32_t uncompressed_size; | 
 |   // The length of the entry file name in bytes. The file name | 
 |   // will appear immediately after this record. | 
 |   uint16_t file_name_length; | 
 |   // The length of the extra field info (in bytes). This data | 
 |   // will appear immediately after the entry file name. | 
 |   uint16_t extra_field_length; | 
 |   // The length of the entry comment (in bytes). This data will | 
 |   // appear immediately after the extra field. | 
 |   uint16_t comment_length; | 
 |   // The start disk for this entry. Ignored by this implementation). | 
 |   uint16_t file_start_disk; | 
 |   // File attributes. Ignored by this implementation. | 
 |   uint16_t internal_file_attributes; | 
 |   // File attributes. Ignored by this implementation. | 
 |   uint32_t external_file_attributes; | 
 |   // The offset to the local file header for this entry, from the | 
 |   // beginning of this archive. | 
 |   uint32_t local_file_header_offset; | 
 |  private: | 
 |   DISALLOW_IMPLICIT_CONSTRUCTORS(CentralDirectoryRecord); | 
 | } __attribute__((packed)); | 
 |  | 
 | // The local file header for a given entry. This duplicates information | 
 | // present in the central directory of the archive. It is an error for | 
 | // the information here to be different from the central directory | 
 | // information for a given entry. | 
 | struct LocalFileHeader { | 
 |   static const uint32_t kSignature = 0x04034b50; | 
 |  | 
 |   // The local file header signature, must be |kSignature|. | 
 |   uint32_t lfh_signature; | 
 |   // Tool version. Ignored by this implementation. | 
 |   uint16_t version_needed; | 
 |   // The "general purpose bit flags" for this entry. The only | 
 |   // flag value that we currently check for is the "data descriptor" | 
 |   // flag. | 
 |   uint16_t gpb_flags; | 
 |   // The compression method for this entry, one of |kCompressStored| | 
 |   // and |kCompressDeflated|. | 
 |   uint16_t compression_method; | 
 |   // The file modification time and date for this entry. | 
 |   uint16_t last_mod_time; | 
 |   uint16_t last_mod_date; | 
 |   // The CRC-32 checksum for this entry. | 
 |   uint32_t crc32; | 
 |   // The compressed size (in bytes) of this entry. | 
 |   uint32_t compressed_size; | 
 |   // The uncompressed size (in bytes) of this entry. | 
 |   uint32_t uncompressed_size; | 
 |   // The length of the entry file name in bytes. The file name | 
 |   // will appear immediately after this record. | 
 |   uint16_t file_name_length; | 
 |   // The length of the extra field info (in bytes). This data | 
 |   // will appear immediately after the entry file name. | 
 |   uint16_t extra_field_length; | 
 |  private: | 
 |   DISALLOW_IMPLICIT_CONSTRUCTORS(LocalFileHeader); | 
 | } __attribute__((packed)); | 
 |  | 
 | struct DataDescriptor { | 
 |   // The *optional* data descriptor start signature. | 
 |   static const uint32_t kOptSignature = 0x08074b50; | 
 |  | 
 |   // CRC-32 checksum of the entry. | 
 |   uint32_t crc32; | 
 |   // Compressed size of the entry. | 
 |   uint32_t compressed_size; | 
 |   // Uncompressed size of the entry. | 
 |   uint32_t uncompressed_size; | 
 |  private: | 
 |   DISALLOW_IMPLICIT_CONSTRUCTORS(DataDescriptor); | 
 | } __attribute__((packed)); | 
 |  | 
 | #undef DISALLOW_IMPLICIT_CONSTRUCTORS | 
 |  | 
 | static const uint32_t kGPBDDFlagMask = 0x0008;         // mask value that signifies that the entry has a DD | 
 |  | 
 | // The maximum size of a central directory or a file | 
 | // comment in bytes. | 
 | static const uint32_t kMaxCommentLen = 65535; | 
 |  | 
 | // The maximum number of bytes to scan backwards for the EOCD start. | 
 | static const uint32_t kMaxEOCDSearch = kMaxCommentLen + sizeof(EocdRecord); | 
 |  | 
 | static const char* kErrorMessages[] = { | 
 |   "Unknown return code.", | 
 |   "Iteration ended", | 
 |   "Zlib error", | 
 |   "Invalid file", | 
 |   "Invalid handle", | 
 |   "Duplicate entries in archive", | 
 |   "Empty archive", | 
 |   "Entry not found", | 
 |   "Invalid offset", | 
 |   "Inconsistent information", | 
 |   "Invalid entry name", | 
 |   "I/O Error", | 
 |   "File mapping failed" | 
 | }; | 
 |  | 
 | static const int32_t kErrorMessageUpperBound = 0; | 
 |  | 
 | static const int32_t kIterationEnd = -1; | 
 |  | 
 | // We encountered a Zlib error when inflating a stream from this file. | 
 | // Usually indicates file corruption. | 
 | static const int32_t kZlibError = -2; | 
 |  | 
 | // The input file cannot be processed as a zip archive. Usually because | 
 | // it's too small, too large or does not have a valid signature. | 
 | static const int32_t kInvalidFile = -3; | 
 |  | 
 | // An invalid iteration / ziparchive handle was passed in as an input | 
 | // argument. | 
 | static const int32_t kInvalidHandle = -4; | 
 |  | 
 | // The zip archive contained two (or possibly more) entries with the same | 
 | // name. | 
 | static const int32_t kDuplicateEntry = -5; | 
 |  | 
 | // The zip archive contains no entries. | 
 | static const int32_t kEmptyArchive = -6; | 
 |  | 
 | // The specified entry was not found in the archive. | 
 | static const int32_t kEntryNotFound = -7; | 
 |  | 
 | // The zip archive contained an invalid local file header pointer. | 
 | static const int32_t kInvalidOffset = -8; | 
 |  | 
 | // The zip archive contained inconsistent entry information. This could | 
 | // be because the central directory & local file header did not agree, or | 
 | // if the actual uncompressed length or crc32 do not match their declared | 
 | // values. | 
 | static const int32_t kInconsistentInformation = -9; | 
 |  | 
 | // An invalid entry name was encountered. | 
 | static const int32_t kInvalidEntryName = -10; | 
 |  | 
 | // An I/O related system call (read, lseek, ftruncate, map) failed. | 
 | static const int32_t kIoError = -11; | 
 |  | 
 | // We were not able to mmap the central directory or entry contents. | 
 | static const int32_t kMmapFailed = -12; | 
 |  | 
 | static const int32_t kErrorMessageLowerBound = -13; | 
 |  | 
 | static const char kTempMappingFileName[] = "zip: ExtractFileToFile"; | 
 |  | 
 | /* | 
 |  * A Read-only Zip archive. | 
 |  * | 
 |  * We want "open" and "find entry by name" to be fast operations, and | 
 |  * we want to use as little memory as possible.  We memory-map the zip | 
 |  * central directory, and load a hash table with pointers to the filenames | 
 |  * (which aren't null-terminated).  The other fields are at a fixed offset | 
 |  * from the filename, so we don't need to extract those (but we do need | 
 |  * to byte-read and endian-swap them every time we want them). | 
 |  * | 
 |  * It's possible that somebody has handed us a massive (~1GB) zip archive, | 
 |  * so we can't expect to mmap the entire file. | 
 |  * | 
 |  * To speed comparisons when doing a lookup by name, we could make the mapping | 
 |  * "private" (copy-on-write) and null-terminate the filenames after verifying | 
 |  * the record structure.  However, this requires a private mapping of | 
 |  * every page that the Central Directory touches.  Easier to tuck a copy | 
 |  * of the string length into the hash table entry. | 
 |  */ | 
 | struct ZipArchive { | 
 |   /* open Zip archive */ | 
 |   const int fd; | 
 |   const bool close_file; | 
 |  | 
 |   /* mapped central directory area */ | 
 |   off64_t directory_offset; | 
 |   android::FileMap directory_map; | 
 |  | 
 |   /* number of entries in the Zip archive */ | 
 |   uint16_t num_entries; | 
 |  | 
 |   /* | 
 |    * We know how many entries are in the Zip archive, so we can have a | 
 |    * fixed-size hash table. We define a load factor of 0.75 and overallocat | 
 |    * so the maximum number entries can never be higher than | 
 |    * ((4 * UINT16_MAX) / 3 + 1) which can safely fit into a uint32_t. | 
 |    */ | 
 |   uint32_t hash_table_size; | 
 |   ZipEntryName* hash_table; | 
 |  | 
 |   ZipArchive(const int fd, bool assume_ownership) : | 
 |       fd(fd), | 
 |       close_file(assume_ownership), | 
 |       directory_offset(0), | 
 |       num_entries(0), | 
 |       hash_table_size(0), | 
 |       hash_table(NULL) {} | 
 |  | 
 |   ~ZipArchive() { | 
 |     if (close_file && fd >= 0) { | 
 |       close(fd); | 
 |     } | 
 |  | 
 |     free(hash_table); | 
 |   } | 
 | }; | 
 |  | 
 | static int32_t CopyFileToFile(int fd, uint8_t* begin, const uint32_t length, uint64_t *crc_out) { | 
 |   static const uint32_t kBufSize = 32768; | 
 |   uint8_t buf[kBufSize]; | 
 |  | 
 |   uint32_t count = 0; | 
 |   uint64_t crc = 0; | 
 |   while (count < length) { | 
 |     uint32_t remaining = length - count; | 
 |  | 
 |     // Safe conversion because kBufSize is narrow enough for a 32 bit signed | 
 |     // value. | 
 |     ssize_t get_size = (remaining > kBufSize) ? kBufSize : remaining; | 
 |     ssize_t actual = TEMP_FAILURE_RETRY(read(fd, buf, get_size)); | 
 |  | 
 |     if (actual != get_size) { | 
 |       ALOGW("CopyFileToFile: copy read failed (" ZD " vs " ZD ")", actual, get_size); | 
 |       return kIoError; | 
 |     } | 
 |  | 
 |     memcpy(begin + count, buf, get_size); | 
 |     crc = crc32(crc, buf, get_size); | 
 |     count += get_size; | 
 |   } | 
 |  | 
 |   *crc_out = crc; | 
 |  | 
 |   return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Round up to the next highest power of 2. | 
 |  * | 
 |  * Found on http://graphics.stanford.edu/~seander/bithacks.html. | 
 |  */ | 
 | static uint32_t RoundUpPower2(uint32_t val) { | 
 |   val--; | 
 |   val |= val >> 1; | 
 |   val |= val >> 2; | 
 |   val |= val >> 4; | 
 |   val |= val >> 8; | 
 |   val |= val >> 16; | 
 |   val++; | 
 |  | 
 |   return val; | 
 | } | 
 |  | 
 | static uint32_t ComputeHash(const ZipEntryName& name) { | 
 |   uint32_t hash = 0; | 
 |   uint16_t len = name.name_length; | 
 |   const uint8_t* str = name.name; | 
 |  | 
 |   while (len--) { | 
 |     hash = hash * 31 + *str++; | 
 |   } | 
 |  | 
 |   return hash; | 
 | } | 
 |  | 
 | /* | 
 |  * Convert a ZipEntry to a hash table index, verifying that it's in a | 
 |  * valid range. | 
 |  */ | 
 | static int64_t EntryToIndex(const ZipEntryName* hash_table, | 
 |                             const uint32_t hash_table_size, | 
 |                             const ZipEntryName& name) { | 
 |   const uint32_t hash = ComputeHash(name); | 
 |  | 
 |   // NOTE: (hash_table_size - 1) is guaranteed to be non-negative. | 
 |   uint32_t ent = hash & (hash_table_size - 1); | 
 |   while (hash_table[ent].name != NULL) { | 
 |     if (hash_table[ent].name_length == name.name_length && | 
 |         memcmp(hash_table[ent].name, name.name, name.name_length) == 0) { | 
 |       return ent; | 
 |     } | 
 |  | 
 |     ent = (ent + 1) & (hash_table_size - 1); | 
 |   } | 
 |  | 
 |   ALOGV("Zip: Unable to find entry %.*s", name.name_length, name.name); | 
 |   return kEntryNotFound; | 
 | } | 
 |  | 
 | /* | 
 |  * Add a new entry to the hash table. | 
 |  */ | 
 | static int32_t AddToHash(ZipEntryName *hash_table, const uint64_t hash_table_size, | 
 |                          const ZipEntryName& name) { | 
 |   const uint64_t hash = ComputeHash(name); | 
 |   uint32_t ent = hash & (hash_table_size - 1); | 
 |  | 
 |   /* | 
 |    * We over-allocated the table, so we're guaranteed to find an empty slot. | 
 |    * Further, we guarantee that the hashtable size is not 0. | 
 |    */ | 
 |   while (hash_table[ent].name != NULL) { | 
 |     if (hash_table[ent].name_length == name.name_length && | 
 |         memcmp(hash_table[ent].name, name.name, name.name_length) == 0) { | 
 |       // We've found a duplicate entry. We don't accept it | 
 |       ALOGW("Zip: Found duplicate entry %.*s", name.name_length, name.name); | 
 |       return kDuplicateEntry; | 
 |     } | 
 |     ent = (ent + 1) & (hash_table_size - 1); | 
 |   } | 
 |  | 
 |   hash_table[ent].name = name.name; | 
 |   hash_table[ent].name_length = name.name_length; | 
 |   return 0; | 
 | } | 
 |  | 
 | static int32_t MapCentralDirectory0(int fd, const char* debug_file_name, | 
 |                                     ZipArchive* archive, off64_t file_length, | 
 |                                     off64_t read_amount, uint8_t* scan_buffer) { | 
 |   const off64_t search_start = file_length - read_amount; | 
 |  | 
 |   if (lseek64(fd, search_start, SEEK_SET) != search_start) { | 
 |     ALOGW("Zip: seek %" PRId64 " failed: %s", static_cast<int64_t>(search_start), | 
 |           strerror(errno)); | 
 |     return kIoError; | 
 |   } | 
 |   ssize_t actual = TEMP_FAILURE_RETRY( | 
 |       read(fd, scan_buffer, static_cast<size_t>(read_amount))); | 
 |   if (actual != static_cast<ssize_t>(read_amount)) { | 
 |     ALOGW("Zip: read %" PRId64 " failed: %s", static_cast<int64_t>(read_amount), | 
 |           strerror(errno)); | 
 |     return kIoError; | 
 |   } | 
 |  | 
 |   /* | 
 |    * Scan backward for the EOCD magic.  In an archive without a trailing | 
 |    * comment, we'll find it on the first try.  (We may want to consider | 
 |    * doing an initial minimal read; if we don't find it, retry with a | 
 |    * second read as above.) | 
 |    */ | 
 |   int i = read_amount - sizeof(EocdRecord); | 
 |   for (; i >= 0; i--) { | 
 |     if (scan_buffer[i] == 0x50) { | 
 |       uint32_t* sig_addr = reinterpret_cast<uint32_t*>(&scan_buffer[i]); | 
 |       if (get_unaligned<uint32_t>(sig_addr) == EocdRecord::kSignature) { | 
 |         ALOGV("+++ Found EOCD at buf+%d", i); | 
 |         break; | 
 |       } | 
 |     } | 
 |   } | 
 |   if (i < 0) { | 
 |     ALOGD("Zip: EOCD not found, %s is not zip", debug_file_name); | 
 |     return kInvalidFile; | 
 |   } | 
 |  | 
 |   const off64_t eocd_offset = search_start + i; | 
 |   const EocdRecord* eocd = reinterpret_cast<const EocdRecord*>(scan_buffer + i); | 
 |   /* | 
 |    * Verify that there's no trailing space at the end of the central directory | 
 |    * and its comment. | 
 |    */ | 
 |   const off64_t calculated_length = eocd_offset + sizeof(EocdRecord) | 
 |       + eocd->comment_length; | 
 |   if (calculated_length != file_length) { | 
 |     ALOGW("Zip: %" PRId64 " extraneous bytes at the end of the central directory", | 
 |           static_cast<int64_t>(file_length - calculated_length)); | 
 |     return kInvalidFile; | 
 |   } | 
 |  | 
 |   /* | 
 |    * Grab the CD offset and size, and the number of entries in the | 
 |    * archive and verify that they look reasonable. | 
 |    */ | 
 |   if (eocd->cd_start_offset + eocd->cd_size > eocd_offset) { | 
 |     ALOGW("Zip: bad offsets (dir %" PRIu32 ", size %" PRIu32 ", eocd %" PRId64 ")", | 
 |         eocd->cd_start_offset, eocd->cd_size, static_cast<int64_t>(eocd_offset)); | 
 |     return kInvalidOffset; | 
 |   } | 
 |   if (eocd->num_records == 0) { | 
 |     ALOGW("Zip: empty archive?"); | 
 |     return kEmptyArchive; | 
 |   } | 
 |  | 
 |   ALOGV("+++ num_entries=%" PRIu32 "dir_size=%" PRIu32 " dir_offset=%" PRIu32, | 
 |         eocd->num_records, eocd->cd_size, eocd->cd_start_offset); | 
 |  | 
 |   /* | 
 |    * It all looks good.  Create a mapping for the CD, and set the fields | 
 |    * in archive. | 
 |    */ | 
 |   if (!archive->directory_map.create(debug_file_name, fd, | 
 |           static_cast<off64_t>(eocd->cd_start_offset), | 
 |           static_cast<size_t>(eocd->cd_size), true /* read only */) ) { | 
 |     return kMmapFailed; | 
 |   } | 
 |  | 
 |   archive->num_entries = eocd->num_records; | 
 |   archive->directory_offset = eocd->cd_start_offset; | 
 |  | 
 |   return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Find the zip Central Directory and memory-map it. | 
 |  * | 
 |  * On success, returns 0 after populating fields from the EOCD area: | 
 |  *   directory_offset | 
 |  *   directory_map | 
 |  *   num_entries | 
 |  */ | 
 | static int32_t MapCentralDirectory(int fd, const char* debug_file_name, | 
 |                                    ZipArchive* archive) { | 
 |  | 
 |   // Test file length. We use lseek64 to make sure the file | 
 |   // is small enough to be a zip file (Its size must be less than | 
 |   // 0xffffffff bytes). | 
 |   off64_t file_length = lseek64(fd, 0, SEEK_END); | 
 |   if (file_length == -1) { | 
 |     ALOGV("Zip: lseek on fd %d failed", fd); | 
 |     return kInvalidFile; | 
 |   } | 
 |  | 
 |   if (file_length > static_cast<off64_t>(0xffffffff)) { | 
 |     ALOGV("Zip: zip file too long %" PRId64, static_cast<int64_t>(file_length)); | 
 |     return kInvalidFile; | 
 |   } | 
 |  | 
 |   if (file_length < static_cast<off64_t>(sizeof(EocdRecord))) { | 
 |     ALOGV("Zip: length %" PRId64 " is too small to be zip", static_cast<int64_t>(file_length)); | 
 |     return kInvalidFile; | 
 |   } | 
 |  | 
 |   /* | 
 |    * Perform the traditional EOCD snipe hunt. | 
 |    * | 
 |    * We're searching for the End of Central Directory magic number, | 
 |    * which appears at the start of the EOCD block.  It's followed by | 
 |    * 18 bytes of EOCD stuff and up to 64KB of archive comment.  We | 
 |    * need to read the last part of the file into a buffer, dig through | 
 |    * it to find the magic number, parse some values out, and use those | 
 |    * to determine the extent of the CD. | 
 |    * | 
 |    * We start by pulling in the last part of the file. | 
 |    */ | 
 |   off64_t read_amount = kMaxEOCDSearch; | 
 |   if (file_length < read_amount) { | 
 |     read_amount = file_length; | 
 |   } | 
 |  | 
 |   uint8_t* scan_buffer = reinterpret_cast<uint8_t*>(malloc(read_amount)); | 
 |   int32_t result = MapCentralDirectory0(fd, debug_file_name, archive, | 
 |                                         file_length, read_amount, scan_buffer); | 
 |  | 
 |   free(scan_buffer); | 
 |   return result; | 
 | } | 
 |  | 
 | /* | 
 |  * Parses the Zip archive's Central Directory.  Allocates and populates the | 
 |  * hash table. | 
 |  * | 
 |  * Returns 0 on success. | 
 |  */ | 
 | static int32_t ParseZipArchive(ZipArchive* archive) { | 
 |   const uint8_t* const cd_ptr = | 
 |       reinterpret_cast<const uint8_t*>(archive->directory_map.getDataPtr()); | 
 |   const size_t cd_length = archive->directory_map.getDataLength(); | 
 |   const uint16_t num_entries = archive->num_entries; | 
 |  | 
 |   /* | 
 |    * Create hash table.  We have a minimum 75% load factor, possibly as | 
 |    * low as 50% after we round off to a power of 2.  There must be at | 
 |    * least one unused entry to avoid an infinite loop during creation. | 
 |    */ | 
 |   archive->hash_table_size = RoundUpPower2(1 + (num_entries * 4) / 3); | 
 |   archive->hash_table = reinterpret_cast<ZipEntryName*>(calloc(archive->hash_table_size, | 
 |       sizeof(ZipEntryName))); | 
 |  | 
 |   /* | 
 |    * Walk through the central directory, adding entries to the hash | 
 |    * table and verifying values. | 
 |    */ | 
 |   const uint8_t* const cd_end = cd_ptr + cd_length; | 
 |   const uint8_t* ptr = cd_ptr; | 
 |   for (uint16_t i = 0; i < num_entries; i++) { | 
 |     const CentralDirectoryRecord* cdr = | 
 |         reinterpret_cast<const CentralDirectoryRecord*>(ptr); | 
 |     if (cdr->record_signature != CentralDirectoryRecord::kSignature) { | 
 |       ALOGW("Zip: missed a central dir sig (at %" PRIu16 ")", i); | 
 |       return -1; | 
 |     } | 
 |  | 
 |     if (ptr + sizeof(CentralDirectoryRecord) > cd_end) { | 
 |       ALOGW("Zip: ran off the end (at %" PRIu16 ")", i); | 
 |       return -1; | 
 |     } | 
 |  | 
 |     const off64_t local_header_offset = cdr->local_file_header_offset; | 
 |     if (local_header_offset >= archive->directory_offset) { | 
 |       ALOGW("Zip: bad LFH offset %" PRId64 " at entry %" PRIu16, | 
 |           static_cast<int64_t>(local_header_offset), i); | 
 |       return -1; | 
 |     } | 
 |  | 
 |     const uint16_t file_name_length = cdr->file_name_length; | 
 |     const uint16_t extra_length = cdr->extra_field_length; | 
 |     const uint16_t comment_length = cdr->comment_length; | 
 |     const uint8_t* file_name = ptr + sizeof(CentralDirectoryRecord); | 
 |  | 
 |     /* check that file name is valid UTF-8 and doesn't contain NUL (U+0000) characters */ | 
 |     if (!IsValidEntryName(file_name, file_name_length)) { | 
 |       return -1; | 
 |     } | 
 |  | 
 |     /* add the CDE filename to the hash table */ | 
 |     ZipEntryName entry_name; | 
 |     entry_name.name = file_name; | 
 |     entry_name.name_length = file_name_length; | 
 |     const int add_result = AddToHash(archive->hash_table, | 
 |         archive->hash_table_size, entry_name); | 
 |     if (add_result != 0) { | 
 |       ALOGW("Zip: Error adding entry to hash table %d", add_result); | 
 |       return add_result; | 
 |     } | 
 |  | 
 |     ptr += sizeof(CentralDirectoryRecord) + file_name_length + extra_length + comment_length; | 
 |     if ((ptr - cd_ptr) > static_cast<int64_t>(cd_length)) { | 
 |       ALOGW("Zip: bad CD advance (%tu vs %zu) at entry %" PRIu16, | 
 |           ptr - cd_ptr, cd_length, i); | 
 |       return -1; | 
 |     } | 
 |   } | 
 |   ALOGV("+++ zip good scan %" PRIu16 " entries", num_entries); | 
 |  | 
 |   return 0; | 
 | } | 
 |  | 
 | static int32_t OpenArchiveInternal(ZipArchive* archive, | 
 |                                    const char* debug_file_name) { | 
 |   int32_t result = -1; | 
 |   if ((result = MapCentralDirectory(archive->fd, debug_file_name, archive))) { | 
 |     return result; | 
 |   } | 
 |  | 
 |   if ((result = ParseZipArchive(archive))) { | 
 |     return result; | 
 |   } | 
 |  | 
 |   return 0; | 
 | } | 
 |  | 
 | int32_t OpenArchiveFd(int fd, const char* debug_file_name, | 
 |                       ZipArchiveHandle* handle, bool assume_ownership) { | 
 |   ZipArchive* archive = new ZipArchive(fd, assume_ownership); | 
 |   *handle = archive; | 
 |   return OpenArchiveInternal(archive, debug_file_name); | 
 | } | 
 |  | 
 | int32_t OpenArchive(const char* fileName, ZipArchiveHandle* handle) { | 
 |   const int fd = open(fileName, O_RDONLY | O_BINARY, 0); | 
 |   ZipArchive* archive = new ZipArchive(fd, true); | 
 |   *handle = archive; | 
 |  | 
 |   if (fd < 0) { | 
 |     ALOGW("Unable to open '%s': %s", fileName, strerror(errno)); | 
 |     return kIoError; | 
 |   } | 
 |  | 
 |   return OpenArchiveInternal(archive, fileName); | 
 | } | 
 |  | 
 | /* | 
 |  * Close a ZipArchive, closing the file and freeing the contents. | 
 |  */ | 
 | void CloseArchive(ZipArchiveHandle handle) { | 
 |   ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); | 
 |   ALOGV("Closing archive %p", archive); | 
 |   delete archive; | 
 | } | 
 |  | 
 | static int32_t UpdateEntryFromDataDescriptor(int fd, | 
 |                                              ZipEntry *entry) { | 
 |   uint8_t ddBuf[sizeof(DataDescriptor) + sizeof(DataDescriptor::kOptSignature)]; | 
 |   ssize_t actual = TEMP_FAILURE_RETRY(read(fd, ddBuf, sizeof(ddBuf))); | 
 |   if (actual != sizeof(ddBuf)) { | 
 |     return kIoError; | 
 |   } | 
 |  | 
 |   const uint32_t ddSignature = *(reinterpret_cast<const uint32_t*>(ddBuf)); | 
 |   const uint16_t offset = (ddSignature == DataDescriptor::kOptSignature) ? 4 : 0; | 
 |   const DataDescriptor* descriptor = reinterpret_cast<const DataDescriptor*>(ddBuf + offset); | 
 |  | 
 |   entry->crc32 = descriptor->crc32; | 
 |   entry->compressed_length = descriptor->compressed_size; | 
 |   entry->uncompressed_length = descriptor->uncompressed_size; | 
 |  | 
 |   return 0; | 
 | } | 
 |  | 
 | // Attempts to read |len| bytes into |buf| at offset |off|. | 
 | // | 
 | // This method uses pread64 on platforms that support it and | 
 | // lseek64 + read on platforms that don't. This implies that | 
 | // callers should not rely on the |fd| offset being incremented | 
 | // as a side effect of this call. | 
 | static inline ssize_t ReadAtOffset(int fd, uint8_t* buf, size_t len, | 
 |                                    off64_t off) { | 
 | #if !defined(_WIN32) | 
 |   return TEMP_FAILURE_RETRY(pread64(fd, buf, len, off)); | 
 | #else | 
 |   // The only supported platform that doesn't support pread at the moment | 
 |   // is Windows. Only recent versions of windows support unix like forks, | 
 |   // and even there the semantics are quite different. | 
 |   if (lseek64(fd, off, SEEK_SET) != off) { | 
 |     ALOGW("Zip: failed seek to offset %" PRId64, off); | 
 |     return kIoError; | 
 |   } | 
 |  | 
 |   return TEMP_FAILURE_RETRY(read(fd, buf, len)); | 
 | #endif | 
 | } | 
 |  | 
 | static int32_t FindEntry(const ZipArchive* archive, const int ent, | 
 |                          ZipEntry* data) { | 
 |   const uint16_t nameLen = archive->hash_table[ent].name_length; | 
 |  | 
 |   // Recover the start of the central directory entry from the filename | 
 |   // pointer.  The filename is the first entry past the fixed-size data, | 
 |   // so we can just subtract back from that. | 
 |   const uint8_t* ptr = archive->hash_table[ent].name; | 
 |   ptr -= sizeof(CentralDirectoryRecord); | 
 |  | 
 |   // This is the base of our mmapped region, we have to sanity check that | 
 |   // the name that's in the hash table is a pointer to a location within | 
 |   // this mapped region. | 
 |   const uint8_t* base_ptr = reinterpret_cast<const uint8_t*>( | 
 |     archive->directory_map.getDataPtr()); | 
 |   if (ptr < base_ptr || ptr > base_ptr + archive->directory_map.getDataLength()) { | 
 |     ALOGW("Zip: Invalid entry pointer"); | 
 |     return kInvalidOffset; | 
 |   } | 
 |  | 
 |   const CentralDirectoryRecord *cdr = | 
 |       reinterpret_cast<const CentralDirectoryRecord*>(ptr); | 
 |  | 
 |   // The offset of the start of the central directory in the zipfile. | 
 |   // We keep this lying around so that we can sanity check all our lengths | 
 |   // and our per-file structures. | 
 |   const off64_t cd_offset = archive->directory_offset; | 
 |  | 
 |   // Fill out the compression method, modification time, crc32 | 
 |   // and other interesting attributes from the central directory. These | 
 |   // will later be compared against values from the local file header. | 
 |   data->method = cdr->compression_method; | 
 |   data->mod_time = cdr->last_mod_time; | 
 |   data->crc32 = cdr->crc32; | 
 |   data->compressed_length = cdr->compressed_size; | 
 |   data->uncompressed_length = cdr->uncompressed_size; | 
 |  | 
 |   // Figure out the local header offset from the central directory. The | 
 |   // actual file data will begin after the local header and the name / | 
 |   // extra comments. | 
 |   const off64_t local_header_offset = cdr->local_file_header_offset; | 
 |   if (local_header_offset + static_cast<off64_t>(sizeof(LocalFileHeader)) >= cd_offset) { | 
 |     ALOGW("Zip: bad local hdr offset in zip"); | 
 |     return kInvalidOffset; | 
 |   } | 
 |  | 
 |   uint8_t lfh_buf[sizeof(LocalFileHeader)]; | 
 |   ssize_t actual = ReadAtOffset(archive->fd, lfh_buf, sizeof(lfh_buf), | 
 |                                  local_header_offset); | 
 |   if (actual != sizeof(lfh_buf)) { | 
 |     ALOGW("Zip: failed reading lfh name from offset %" PRId64, | 
 |         static_cast<int64_t>(local_header_offset)); | 
 |     return kIoError; | 
 |   } | 
 |  | 
 |   const LocalFileHeader *lfh = reinterpret_cast<const LocalFileHeader*>(lfh_buf); | 
 |  | 
 |   if (lfh->lfh_signature != LocalFileHeader::kSignature) { | 
 |     ALOGW("Zip: didn't find signature at start of lfh, offset=%" PRId64, | 
 |         static_cast<int64_t>(local_header_offset)); | 
 |     return kInvalidOffset; | 
 |   } | 
 |  | 
 |   // Paranoia: Match the values specified in the local file header | 
 |   // to those specified in the central directory. | 
 |   if ((lfh->gpb_flags & kGPBDDFlagMask) == 0) { | 
 |     data->has_data_descriptor = 0; | 
 |     if (data->compressed_length != lfh->compressed_size | 
 |         || data->uncompressed_length != lfh->uncompressed_size | 
 |         || data->crc32 != lfh->crc32) { | 
 |       ALOGW("Zip: size/crc32 mismatch. expected {%" PRIu32 ", %" PRIu32 | 
 |         ", %" PRIx32 "}, was {%" PRIu32 ", %" PRIu32 ", %" PRIx32 "}", | 
 |         data->compressed_length, data->uncompressed_length, data->crc32, | 
 |         lfh->compressed_size, lfh->uncompressed_size, lfh->crc32); | 
 |       return kInconsistentInformation; | 
 |     } | 
 |   } else { | 
 |     data->has_data_descriptor = 1; | 
 |   } | 
 |  | 
 |   // Check that the local file header name matches the declared | 
 |   // name in the central directory. | 
 |   if (lfh->file_name_length == nameLen) { | 
 |     const off64_t name_offset = local_header_offset + sizeof(LocalFileHeader); | 
 |     if (name_offset + lfh->file_name_length > cd_offset) { | 
 |       ALOGW("Zip: Invalid declared length"); | 
 |       return kInvalidOffset; | 
 |     } | 
 |  | 
 |     uint8_t* name_buf = reinterpret_cast<uint8_t*>(malloc(nameLen)); | 
 |     ssize_t actual = ReadAtOffset(archive->fd, name_buf, nameLen, | 
 |                                   name_offset); | 
 |  | 
 |     if (actual != nameLen) { | 
 |       ALOGW("Zip: failed reading lfh name from offset %" PRId64, static_cast<int64_t>(name_offset)); | 
 |       free(name_buf); | 
 |       return kIoError; | 
 |     } | 
 |  | 
 |     if (memcmp(archive->hash_table[ent].name, name_buf, nameLen)) { | 
 |       free(name_buf); | 
 |       return kInconsistentInformation; | 
 |     } | 
 |  | 
 |     free(name_buf); | 
 |   } else { | 
 |     ALOGW("Zip: lfh name did not match central directory."); | 
 |     return kInconsistentInformation; | 
 |   } | 
 |  | 
 |   const off64_t data_offset = local_header_offset + sizeof(LocalFileHeader) | 
 |       + lfh->file_name_length + lfh->extra_field_length; | 
 |   if (data_offset > cd_offset) { | 
 |     ALOGW("Zip: bad data offset %" PRId64 " in zip", static_cast<int64_t>(data_offset)); | 
 |     return kInvalidOffset; | 
 |   } | 
 |  | 
 |   if (static_cast<off64_t>(data_offset + data->compressed_length) > cd_offset) { | 
 |     ALOGW("Zip: bad compressed length in zip (%" PRId64 " + %" PRIu32 " > %" PRId64 ")", | 
 |       static_cast<int64_t>(data_offset), data->compressed_length, static_cast<int64_t>(cd_offset)); | 
 |     return kInvalidOffset; | 
 |   } | 
 |  | 
 |   if (data->method == kCompressStored && | 
 |     static_cast<off64_t>(data_offset + data->uncompressed_length) > cd_offset) { | 
 |      ALOGW("Zip: bad uncompressed length in zip (%" PRId64 " + %" PRIu32 " > %" PRId64 ")", | 
 |        static_cast<int64_t>(data_offset), data->uncompressed_length, | 
 |        static_cast<int64_t>(cd_offset)); | 
 |      return kInvalidOffset; | 
 |   } | 
 |  | 
 |   data->offset = data_offset; | 
 |   return 0; | 
 | } | 
 |  | 
 | struct IterationHandle { | 
 |   uint32_t position; | 
 |   // We're not using vector here because this code is used in the Windows SDK | 
 |   // where the STL is not available. | 
 |   const uint8_t* prefix; | 
 |   uint16_t prefix_len; | 
 |   ZipArchive* archive; | 
 |  | 
 |   IterationHandle() : prefix(NULL), prefix_len(0) {} | 
 |  | 
 |   IterationHandle(const ZipEntryName& prefix_name) | 
 |       : prefix_len(prefix_name.name_length) { | 
 |     uint8_t* prefix_copy = new uint8_t[prefix_len]; | 
 |     memcpy(prefix_copy, prefix_name.name, prefix_len); | 
 |     prefix = prefix_copy; | 
 |   } | 
 |  | 
 |   ~IterationHandle() { | 
 |     delete[] prefix; | 
 |   } | 
 | }; | 
 |  | 
 | int32_t StartIteration(ZipArchiveHandle handle, void** cookie_ptr, | 
 |                        const ZipEntryName* optional_prefix) { | 
 |   ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); | 
 |  | 
 |   if (archive == NULL || archive->hash_table == NULL) { | 
 |     ALOGW("Zip: Invalid ZipArchiveHandle"); | 
 |     return kInvalidHandle; | 
 |   } | 
 |  | 
 |   IterationHandle* cookie = | 
 |       optional_prefix != NULL ? new IterationHandle(*optional_prefix) : new IterationHandle(); | 
 |   cookie->position = 0; | 
 |   cookie->archive = archive; | 
 |  | 
 |   *cookie_ptr = cookie ; | 
 |   return 0; | 
 | } | 
 |  | 
 | void EndIteration(void* cookie) { | 
 |   delete reinterpret_cast<IterationHandle*>(cookie); | 
 | } | 
 |  | 
 | int32_t FindEntry(const ZipArchiveHandle handle, const ZipEntryName& entryName, | 
 |                   ZipEntry* data) { | 
 |   const ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); | 
 |   if (entryName.name_length == 0) { | 
 |     ALOGW("Zip: Invalid filename %.*s", entryName.name_length, entryName.name); | 
 |     return kInvalidEntryName; | 
 |   } | 
 |  | 
 |   const int64_t ent = EntryToIndex(archive->hash_table, | 
 |     archive->hash_table_size, entryName); | 
 |  | 
 |   if (ent < 0) { | 
 |     ALOGV("Zip: Could not find entry %.*s", entryName.name_length, entryName.name); | 
 |     return ent; | 
 |   } | 
 |  | 
 |   return FindEntry(archive, ent, data); | 
 | } | 
 |  | 
 | int32_t Next(void* cookie, ZipEntry* data, ZipEntryName* name) { | 
 |   IterationHandle* handle = reinterpret_cast<IterationHandle*>(cookie); | 
 |   if (handle == NULL) { | 
 |     return kInvalidHandle; | 
 |   } | 
 |  | 
 |   ZipArchive* archive = handle->archive; | 
 |   if (archive == NULL || archive->hash_table == NULL) { | 
 |     ALOGW("Zip: Invalid ZipArchiveHandle"); | 
 |     return kInvalidHandle; | 
 |   } | 
 |  | 
 |   const uint32_t currentOffset = handle->position; | 
 |   const uint32_t hash_table_length = archive->hash_table_size; | 
 |   const ZipEntryName *hash_table = archive->hash_table; | 
 |  | 
 |   for (uint32_t i = currentOffset; i < hash_table_length; ++i) { | 
 |     if (hash_table[i].name != NULL && | 
 |         (handle->prefix_len == 0 || | 
 |          (memcmp(handle->prefix, hash_table[i].name, handle->prefix_len) == 0))) { | 
 |       handle->position = (i + 1); | 
 |       const int error = FindEntry(archive, i, data); | 
 |       if (!error) { | 
 |         name->name = hash_table[i].name; | 
 |         name->name_length = hash_table[i].name_length; | 
 |       } | 
 |  | 
 |       return error; | 
 |     } | 
 |   } | 
 |  | 
 |   handle->position = 0; | 
 |   return kIterationEnd; | 
 | } | 
 |  | 
 | // This method is using libz macros with old-style-casts | 
 | #pragma GCC diagnostic push | 
 | #pragma GCC diagnostic ignored "-Wold-style-cast" | 
 | static inline int zlib_inflateInit2(z_stream* stream, int window_bits) { | 
 |   return inflateInit2(stream, window_bits); | 
 | } | 
 | #pragma GCC diagnostic pop | 
 |  | 
 | static int32_t InflateToFile(int fd, const ZipEntry* entry, | 
 |                              uint8_t* begin, uint32_t length, | 
 |                              uint64_t* crc_out) { | 
 |   const size_t kBufSize = 32768; | 
 |   std::vector<uint8_t> read_buf(kBufSize); | 
 |   std::vector<uint8_t> write_buf(kBufSize); | 
 |   z_stream zstream; | 
 |   int zerr; | 
 |  | 
 |   /* | 
 |    * Initialize the zlib stream struct. | 
 |    */ | 
 |   memset(&zstream, 0, sizeof(zstream)); | 
 |   zstream.zalloc = Z_NULL; | 
 |   zstream.zfree = Z_NULL; | 
 |   zstream.opaque = Z_NULL; | 
 |   zstream.next_in = NULL; | 
 |   zstream.avail_in = 0; | 
 |   zstream.next_out = &write_buf[0]; | 
 |   zstream.avail_out = kBufSize; | 
 |   zstream.data_type = Z_UNKNOWN; | 
 |  | 
 |   /* | 
 |    * Use the undocumented "negative window bits" feature to tell zlib | 
 |    * that there's no zlib header waiting for it. | 
 |    */ | 
 |   zerr = zlib_inflateInit2(&zstream, -MAX_WBITS); | 
 |   if (zerr != Z_OK) { | 
 |     if (zerr == Z_VERSION_ERROR) { | 
 |       ALOGE("Installed zlib is not compatible with linked version (%s)", | 
 |         ZLIB_VERSION); | 
 |     } else { | 
 |       ALOGW("Call to inflateInit2 failed (zerr=%d)", zerr); | 
 |     } | 
 |  | 
 |     return kZlibError; | 
 |   } | 
 |  | 
 |   auto zstream_deleter = [](z_stream* stream) { | 
 |     inflateEnd(stream);  /* free up any allocated structures */ | 
 |   }; | 
 |  | 
 |   std::unique_ptr<z_stream, decltype(zstream_deleter)> zstream_guard(&zstream, zstream_deleter); | 
 |  | 
 |   const uint32_t uncompressed_length = entry->uncompressed_length; | 
 |  | 
 |   uint32_t compressed_length = entry->compressed_length; | 
 |   uint32_t write_count = 0; | 
 |   do { | 
 |     /* read as much as we can */ | 
 |     if (zstream.avail_in == 0) { | 
 |       const ZD_TYPE getSize = (compressed_length > kBufSize) ? kBufSize : compressed_length; | 
 |       const ZD_TYPE actual = TEMP_FAILURE_RETRY(read(fd, &read_buf[0], getSize)); | 
 |       if (actual != getSize) { | 
 |         ALOGW("Zip: inflate read failed (" ZD " vs " ZD ")", actual, getSize); | 
 |         return kIoError; | 
 |       } | 
 |  | 
 |       compressed_length -= getSize; | 
 |  | 
 |       zstream.next_in = &read_buf[0]; | 
 |       zstream.avail_in = getSize; | 
 |     } | 
 |  | 
 |     /* uncompress the data */ | 
 |     zerr = inflate(&zstream, Z_NO_FLUSH); | 
 |     if (zerr != Z_OK && zerr != Z_STREAM_END) { | 
 |       ALOGW("Zip: inflate zerr=%d (nIn=%p aIn=%u nOut=%p aOut=%u)", | 
 |           zerr, zstream.next_in, zstream.avail_in, | 
 |           zstream.next_out, zstream.avail_out); | 
 |       return kZlibError; | 
 |     } | 
 |  | 
 |     /* write when we're full or when we're done */ | 
 |     if (zstream.avail_out == 0 || | 
 |       (zerr == Z_STREAM_END && zstream.avail_out != kBufSize)) { | 
 |       const size_t write_size = zstream.next_out - &write_buf[0]; | 
 |       // The file might have declared a bogus length. | 
 |       if (write_size + write_count > length) { | 
 |         return -1; | 
 |       } | 
 |       memcpy(begin + write_count, &write_buf[0], write_size); | 
 |       write_count += write_size; | 
 |  | 
 |       zstream.next_out = &write_buf[0]; | 
 |       zstream.avail_out = kBufSize; | 
 |     } | 
 |   } while (zerr == Z_OK); | 
 |  | 
 |   assert(zerr == Z_STREAM_END);     /* other errors should've been caught */ | 
 |  | 
 |   // stream.adler holds the crc32 value for such streams. | 
 |   *crc_out = zstream.adler; | 
 |  | 
 |   if (zstream.total_out != uncompressed_length || compressed_length != 0) { | 
 |     ALOGW("Zip: size mismatch on inflated file (%lu vs %" PRIu32 ")", | 
 |         zstream.total_out, uncompressed_length); | 
 |     return kInconsistentInformation; | 
 |   } | 
 |  | 
 |   return 0; | 
 | } | 
 |  | 
 | int32_t ExtractToMemory(ZipArchiveHandle handle, | 
 |                         ZipEntry* entry, uint8_t* begin, uint32_t size) { | 
 |   ZipArchive* archive = reinterpret_cast<ZipArchive*>(handle); | 
 |   const uint16_t method = entry->method; | 
 |   off64_t data_offset = entry->offset; | 
 |  | 
 |   if (lseek64(archive->fd, data_offset, SEEK_SET) != data_offset) { | 
 |     ALOGW("Zip: lseek to data at %" PRId64 " failed", static_cast<int64_t>(data_offset)); | 
 |     return kIoError; | 
 |   } | 
 |  | 
 |   // this should default to kUnknownCompressionMethod. | 
 |   int32_t return_value = -1; | 
 |   uint64_t crc = 0; | 
 |   if (method == kCompressStored) { | 
 |     return_value = CopyFileToFile(archive->fd, begin, size, &crc); | 
 |   } else if (method == kCompressDeflated) { | 
 |     return_value = InflateToFile(archive->fd, entry, begin, size, &crc); | 
 |   } | 
 |  | 
 |   if (!return_value && entry->has_data_descriptor) { | 
 |     return_value = UpdateEntryFromDataDescriptor(archive->fd, entry); | 
 |     if (return_value) { | 
 |       return return_value; | 
 |     } | 
 |   } | 
 |  | 
 |   // TODO: Fix this check by passing the right flags to inflate2 so that | 
 |   // it calculates the CRC for us. | 
 |   if (entry->crc32 != crc && false) { | 
 |     ALOGW("Zip: crc mismatch: expected %" PRIu32 ", was %" PRIu64, entry->crc32, crc); | 
 |     return kInconsistentInformation; | 
 |   } | 
 |  | 
 |   return return_value; | 
 | } | 
 |  | 
 | int32_t ExtractEntryToFile(ZipArchiveHandle handle, | 
 |                            ZipEntry* entry, int fd) { | 
 |   const uint32_t declared_length = entry->uncompressed_length; | 
 |  | 
 |   const off64_t current_offset = lseek64(fd, 0, SEEK_CUR); | 
 |   if (current_offset == -1) { | 
 |     ALOGW("Zip: unable to seek to current location on fd %d: %s", fd, | 
 |           strerror(errno)); | 
 |     return kIoError; | 
 |   } | 
 |  | 
 |   int result = 0; | 
 | #if defined(__linux__) | 
 |   // Make sure we have enough space on the volume to extract the compressed | 
 |   // entry. Note that the call to ftruncate below will change the file size but | 
 |   // will not allocate space on disk. | 
 |   if (declared_length > 0) { | 
 |     result = TEMP_FAILURE_RETRY(fallocate(fd, 0, current_offset, declared_length)); | 
 |     if (result == -1) { | 
 |       ALOGW("Zip: unable to allocate space for file to %" PRId64 ": %s", | 
 |             static_cast<int64_t>(declared_length + current_offset), strerror(errno)); | 
 |       return kIoError; | 
 |     } | 
 |   } | 
 | #endif  // defined(__linux__) | 
 |  | 
 |   result = TEMP_FAILURE_RETRY(ftruncate(fd, declared_length + current_offset)); | 
 |   if (result == -1) { | 
 |     ALOGW("Zip: unable to truncate file to %" PRId64 ": %s", | 
 |           static_cast<int64_t>(declared_length + current_offset), strerror(errno)); | 
 |     return kIoError; | 
 |   } | 
 |  | 
 |   // Don't attempt to map a region of length 0. We still need the | 
 |   // ftruncate() though, since the API guarantees that we will truncate | 
 |   // the file to the end of the uncompressed output. | 
 |   if (declared_length == 0) { | 
 |       return 0; | 
 |   } | 
 |  | 
 |   android::FileMap map; | 
 |   if (!map.create(kTempMappingFileName, fd, current_offset, declared_length, false)) { | 
 |     return kMmapFailed; | 
 |   } | 
 |  | 
 |   const int32_t error = ExtractToMemory(handle, entry, | 
 |                                         reinterpret_cast<uint8_t*>(map.getDataPtr()), | 
 |                                         map.getDataLength()); | 
 |   return error; | 
 | } | 
 |  | 
 | const char* ErrorCodeString(int32_t error_code) { | 
 |   if (error_code > kErrorMessageLowerBound && error_code < kErrorMessageUpperBound) { | 
 |     return kErrorMessages[error_code * -1]; | 
 |   } | 
 |  | 
 |   return kErrorMessages[0]; | 
 | } | 
 |  | 
 | int GetFileDescriptor(const ZipArchiveHandle handle) { | 
 |   return reinterpret_cast<ZipArchive*>(handle)->fd; | 
 | } | 
 |  |