| #!/system/bin/sh |
| |
| atdev=/dev/omap_csmi_tty0 |
| pppdev=/dev/omap_csmi_tty1 |
| |
| n1=`cat /data/phoneentry1 2>/dev/null` |
| n2=`cat /data/phoneentry2 2>/dev/null` |
| n3=`cat /data/phoneentry3 2>/dev/null` |
| n1=${n1:-"*#06#"} |
| n2=${n2:-"*#06#"} |
| n3=${n3:-"*#06#"} |
| phoneoutputpid= |
| eventoutputpid= |
| notifypid= |
| notifytoggle=false |
| pppdpid= |
| powerdidletime=120 |
| |
| # map phone specific keys |
| setkey -k 0xe4 -v 0x23 # map # |
| setkey -k 0xe3 -v 0x2a # map * |
| setkey -k 231 -v 513 # map send to newline |
| #setkey -k 0x67 -v 0x20b # map up to scroll back |
| #setkey -k 0x6c -v 0x20a # map down to scroll forward |
| setkey -k 0x73 -v 0x20b # map volume up to scroll back |
| setkey -k 0x72 -v 0x20a # map volume down to scroll forward |
| setkey -k 0x60 -v 0x211 # map PoC to next console |
| |
| # tuttle keys |
| setkey -k 0x38 -v 0x703 # map leftalt to alt |
| setkey -k 0x9b -v 0x703 # map mail to alt |
| setkey -t 8 -k 0x9b -v 0x703 # map alt-mail to alt |
| setkey -t 8 -k 0x10 -v 0x21 # map alt-q to ! |
| setkey -t 8 -k 0x11 -v 0x31 # map alt-w to 1 |
| setkey -t 8 -k 0x12 -v 0x32 # map alt-e to 2 |
| setkey -t 8 -k 0x13 -v 0x33 # map alt-r to 3 |
| setkey -t 8 -k 0x14 -v 0x2b # map alt-t to + |
| setkey -t 8 -k 0x15 -v 0x28 # map alt-y to ( |
| setkey -t 8 -k 0x16 -v 0x29 # map alt-u to ) |
| setkey -t 8 -k 0x17 -v 0x2d # map alt-i to - |
| setkey -t 8 -k 0x18 -v 0x5f # map alt-o to _ |
| setkey -t 8 -k 0x19 -v 0x22 # map alt-p to " |
| setkey -t 8 -k 0x1e -v 0x23 # map alt-a to # |
| setkey -t 8 -k 0x1f -v 0x34 # map alt-s to 4 |
| setkey -t 8 -k 0x20 -v 0x35 # map alt-d to 5 |
| setkey -t 8 -k 0x21 -v 0x36 # map alt-f to 6 |
| setkey -t 8 -k 0x22 -v 0x2f # map alt-g to / |
| setkey -t 8 -k 0x23 -v 0x3f # map alt-h to ? |
| setkey -t 8 -k 0x24 -v 0xa3 # map alt-j to pound |
| setkey -t 8 -k 0x25 -v 0x24 # map alt-k to $ |
| setkey -t 8 -k 0x2c -v 0x2a # map alt-z to * |
| setkey -t 8 -k 0x2d -v 0x37 # map alt-x to 7 |
| setkey -t 8 -k 0x2e -v 0x38 # map alt-c to 8 |
| setkey -t 8 -k 0x2f -v 0x39 # map alt-v to 9 |
| setkey -t 8 -k 0x30 -v 0x7c # map alt-b to | |
| setkey -t 8 -k 0x31 -v 0x40 # map alt-n to @ |
| setkey -t 8 -k 0x32 -v 0x3d # map alt-m to = |
| setkey -t 8 -k 0x33 -v 0x3b # map alt-, to ; |
| setkey -t 8 -k 0x34 -v 0x3a # map alt-. to : |
| setkey -t 8 -k 0x0f -v 0x30 # map alt-tab to 0 |
| setkey -t 8 -k 0x67 -v 0x20b # map alt-up to scroll back |
| setkey -t 8 -k 0x6c -v 0x20a # map alt-down to scroll forward |
| |
| while true |
| do |
| echo |
| echo "------------------------------" |
| echo " 1: init commands" |
| echo " 2: call commands" |
| echo " 3: misc phone" |
| echo " 4: phone debug output" |
| echo " 5: test data connection" |
| echo " 6: start runtime" |
| echo " 7: start runtime w/output" |
| echo " 8: stop runtime" |
| echo " 9: misc" |
| echo -n ": " |
| while true |
| do |
| c=`readtty -t 50 -f -a 1234567890#` |
| case "$c" in |
| "" ) ;; |
| * ) break; |
| esac |
| done |
| echo Got key -$c- |
| case $c in |
| "1" ) |
| while true; do |
| echo |
| echo "------------------------------" |
| echo " 1: Print phone output" |
| echo " 2: ATQ0V1E1+CMEE=2;+CREG=0" |
| echo " 3: AT+CFUN=1" |
| echo " 4: AT+COPS=0" |
| echo " 5: AT+CREG?" |
| echo " 6: Stop phone output" |
| echo " 0: back" |
| echo -n ": " |
| c=`readtty -f -a 1234560#` |
| echo Got key -$c- |
| case "$c" in |
| "1" ) kill $phoneoutputpid; cat $atdev & phoneoutputpid=$! ;; |
| "2" ) echo -e "ATQ0V1E1+CMEE=2;+CREG=0\r" >$atdev;; |
| "3" ) echo -e "AT+CFUN=1\r" >$atdev;; |
| "4" ) echo -e "AT+COPS=0\r" >$atdev;; |
| "5" ) echo -e "AT+CREG?\r" >$atdev;; |
| "6" ) kill $phoneoutputpid; phoneoutputpid= ;; |
| "0" ) break;; |
| esac |
| done |
| ;; |
| "2" ) |
| while true; do |
| echo |
| echo "------------------------------" |
| echo " 1: Dial: ATD $n1;" |
| echo " 2: Dial: ATD $n2;" |
| echo " 3: Dial: ATD $n3;" |
| echo " 4: Set number for 1" |
| echo " 5: Set number for 2" |
| echo " 6: Set number for 3" |
| echo " 7: Dial: ATD ...;" |
| echo " 8: Hang up: ATH" |
| echo " 9: Answer: ATA" |
| echo " 0: back" |
| echo -n ": " |
| c=`readtty -f -a 1234567890#` |
| echo Got key -$c- |
| case "$c" in |
| "1" ) echo "Dialing $n1"; echo -e "ATD $n1;\r" >$atdev;; |
| "2" ) echo "Dialing $n2"; echo -e "ATD $n2;\r" >$atdev;; |
| "3" ) echo "Dialing $n3"; echo -e "ATD $n3;\r" >$atdev;; |
| "4" ) echo -n "Number: "; read n1; echo $n1 >/data/phoneentry1;; |
| "5" ) echo -n "Number: "; read n2; echo $n2 >/data/phoneentry2;; |
| "6" ) echo -n "Number: "; read n3; echo $n3 >/data/phoneentry3;; |
| "7" ) echo -n "Number: "; read n; echo "Dialing $n"; echo -e "ATD $n;\r" >$atdev;; |
| "8" ) echo -e "ATH\r" >$atdev;; |
| "9" ) echo -e "ATA\r" >$atdev;; |
| "0" ) break;; |
| esac |
| done |
| ;; |
| "3" ) |
| while true; do |
| echo |
| echo "------------------------------" |
| echo " 1: Save FFS data" |
| echo " 2: Load user FFS data" |
| echo " 3: Load system FFS data" |
| echo " 4: Reset FFS data" |
| echo " 5: Set uplink gain" |
| echo " 6: Set echo" |
| echo " 7: cat /dev/omap_csmi_battery_t" |
| echo " 8: cat /dev/omap_csmi_htc" |
| echo " 0: back" |
| echo -n ": " |
| c=`readtty -f -a 123456780#` |
| echo Got key -$c- |
| case "$c" in |
| "1" ) cat /dev/omap_csmi_ffs >/data/ffsdata;; |
| "2" ) cat /data/ffsdata >/dev/omap_csmi_ffs;; |
| "3" ) cat /system/ffsdata >/dev/omap_csmi_ffs;; |
| "4" ) echo - >/dev/omap_csmi_ffs;; |
| "5" ) |
| echo -n "Gain: "; read g; |
| echo gu$g >/tmp/gain; |
| cat /tmp/gain 2>/dev/null >/dev/omap_csmi_audio_tes |
| ;; |
| "6" ) |
| echo -n "Echo param (hex): "; read e; |
| echo "e0x$e" >/tmp/echo; |
| cat /tmp/echo 2>/dev/null >/dev/omap_csmi_audio_tes |
| ;; |
| "7" ) cat /dev/omap_csmi_battery_t;; |
| "8" ) cat /dev/omap_csmi_htc;; |
| "0" ) break;; |
| esac |
| done |
| ;; |
| "4" ) |
| while true; do |
| echo |
| echo "------------------------------" |
| echo " 1: Toggle debug I/O" |
| echo " 2: Toggle debug Flow" |
| echo " 3: Toggle debug Interrupt" |
| echo " 4: Toggle debug Info" |
| echo " 5: Toggle GSM run state" |
| echo " 6: Clear GSM data area" |
| echo " 0: back" |
| echo -n ": " |
| c=`readtty -f -a 1234560#` |
| echo Got key -$c- |
| case "$c" in |
| "1" ) echo -n "i" >/sys/devices/system/omap_csmi/debug;; |
| "2" ) echo -n "f" >/sys/devices/system/omap_csmi/debug;; |
| "3" ) echo -n "I" >/sys/devices/system/omap_csmi/debug;; |
| "4" ) echo -n "F" >/sys/devices/system/omap_csmi/debug;; |
| "5" ) echo -n "s" >/sys/devices/system/omap_csmi/debug;; |
| "6" ) echo -n "c" >/sys/devices/system/omap_csmi/debug;; |
| "0" ) break;; |
| esac |
| done |
| ;; |
| "5" ) |
| while true; do |
| echo |
| echo "------------------------------" |
| echo " 1: Start pppd - userspace" |
| echo " 2: Start pppd - kernel" |
| echo " 3: Start pppd - kernel <at1" |
| echo " 4: Configure ppp data to at2" |
| echo " 5: Test with HTTP GET" |
| echo " 6: Kill pppd" |
| echo " 0: back" |
| echo -n ": " |
| c=`readtty -f -a 1234560#` |
| echo Got key -$c- |
| case "$c" in |
| "1" ) kill $pppdpid; pppd notty < $pppdev > $pppdev & pppdpid=$!;; |
| "2" ) kill $pppdpid; pppd nodetach $pppdev & pppdpid=$!;; |
| "3" ) kill &pppdpid; pppd nodetach $pppdev connect "sh -c \"chat -v -f /etc/ppp/connect-data <$atdev >$atdev\"" & pppdpid=$!;; |
| "4" ) echo -e 'AT%DATA=2,"UART",1,,"SER","UART",0\r' >$atdev;; |
| "5" ) test-data-connection;; |
| "6" ) kill $pppdpid; pppdpid=;; |
| "0" ) break;; |
| esac |
| done |
| ;; |
| "6" ) |
| echo |
| echo ------------------------ |
| echo Starting android runtime |
| echo ------------------------ |
| start |
| ;; |
| "7" ) |
| echo |
| echo ------------------------ |
| echo Starting android runtime |
| echo ------------------------ |
| if exists /data/singleproc |
| then |
| single_process="-s" |
| else |
| single_process="" |
| fi |
| start runtime $single_process |
| ;; |
| "8" ) |
| stop |
| ;; |
| "9" ) |
| while true; do |
| echo |
| echo "------------------------------" |
| echo " 1: Print events" |
| echo " 2: Stop event output" |
| if $notifytoggle |
| then |
| echo " 3: stop notify" |
| else |
| echo " 3: notify /sys/android_power" |
| fi |
| echo " 4: start powerd" |
| echo " 5: start powerd verbose" |
| echo " 6: stop powerd" |
| echo " 7: set powerd idletime ($powerdidletime)" |
| echo " 8: start multitap shell" |
| if exists /data/singleproc |
| then |
| echo " 9: enable multiprocess" |
| else |
| echo " 9: disable multiprocess" |
| fi |
| echo " c: start shell" |
| echo " 0: back" |
| echo -n ": " |
| c=`readtty -f -a 1234567890c#` |
| echo Got key -$c- |
| case "$c" in |
| "1" ) kill $eventoutputpid; getevent & eventoutputpid=$! ;; |
| "2" ) kill $eventoutputpid; eventoutputpid= ;; |
| "3" ) |
| if $notifytoggle |
| then |
| kill $notifypid |
| notifypid= |
| notifytoggle=false |
| else |
| kill $notifypid |
| notify -m 0x00000002 -c 0 -p -v 0 -w 30 /sys/android_power & |
| notifypid=$! |
| notifytoggle=true |
| fi |
| ;; |
| "4" ) start powerd -i $powerdidletime ;; |
| "5" ) start powerd -i $powerdidletime -v ;; |
| "6" ) stop powerd ;; |
| "7" ) echo -n "Idle time (seconds): "; read powerdidletime ;; |
| "8" ) |
| readtty -f -p -t 10 -e "[ ~" | sh -i |
| ;; |
| "9" ) |
| if exists /data/singleproc |
| then |
| echo "Enabling multiprocess environment." |
| rm /data/singleproc |
| else |
| echo "Disabling multiprocess environment." |
| echo >/data/singleproc "true" |
| fi |
| ;; |
| "c" ) sh -i <>/dev/tty0 1>&0 2>&1 ;; |
| "0" ) break;; |
| esac |
| done |
| ;; |
| esac |
| done |
| |