| /* | 
 |  * Copyright (C) 2007 The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *      http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 |  | 
 | #include "devices.h" | 
 |  | 
 | #include <errno.h> | 
 | #include <fnmatch.h> | 
 | #include <sys/sysmacros.h> | 
 | #include <unistd.h> | 
 |  | 
 | #include <memory> | 
 |  | 
 | #include <android-base/logging.h> | 
 | #include <android-base/stringprintf.h> | 
 | #include <android-base/strings.h> | 
 | #include <private/android_filesystem_config.h> | 
 | #include <selinux/android.h> | 
 | #include <selinux/selinux.h> | 
 |  | 
 | #include "selinux.h" | 
 | #include "util.h" | 
 |  | 
 | #ifdef _INIT_INIT_H | 
 | #error "Do not include init.h in files used by ueventd; it will expose init's globals" | 
 | #endif | 
 |  | 
 | using android::base::Basename; | 
 | using android::base::Dirname; | 
 | using android::base::Readlink; | 
 | using android::base::Realpath; | 
 | using android::base::StartsWith; | 
 | using android::base::StringPrintf; | 
 |  | 
 | namespace android { | 
 | namespace init { | 
 |  | 
 | /* Given a path that may start with a PCI device, populate the supplied buffer | 
 |  * with the PCI domain/bus number and the peripheral ID and return 0. | 
 |  * If it doesn't start with a PCI device, or there is some error, return -1 */ | 
 | static bool FindPciDevicePrefix(const std::string& path, std::string* result) { | 
 |     result->clear(); | 
 |  | 
 |     if (!StartsWith(path, "/devices/pci")) return false; | 
 |  | 
 |     /* Beginning of the prefix is the initial "pci" after "/devices/" */ | 
 |     std::string::size_type start = 9; | 
 |  | 
 |     /* End of the prefix is two path '/' later, capturing the domain/bus number | 
 |      * and the peripheral ID. Example: pci0000:00/0000:00:1f.2 */ | 
 |     auto end = path.find('/', start); | 
 |     if (end == std::string::npos) return false; | 
 |  | 
 |     end = path.find('/', end + 1); | 
 |     if (end == std::string::npos) return false; | 
 |  | 
 |     auto length = end - start; | 
 |     if (length <= 4) { | 
 |         // The minimum string that will get to this check is 'pci/', which is malformed, | 
 |         // so return false | 
 |         return false; | 
 |     } | 
 |  | 
 |     *result = path.substr(start, length); | 
 |     return true; | 
 | } | 
 |  | 
 | /* Given a path that may start with a virtual block device, populate | 
 |  * the supplied buffer with the virtual block device ID and return 0. | 
 |  * If it doesn't start with a virtual block device, or there is some | 
 |  * error, return -1 */ | 
 | static bool FindVbdDevicePrefix(const std::string& path, std::string* result) { | 
 |     result->clear(); | 
 |  | 
 |     if (!StartsWith(path, "/devices/vbd-")) return false; | 
 |  | 
 |     /* Beginning of the prefix is the initial "vbd-" after "/devices/" */ | 
 |     std::string::size_type start = 13; | 
 |  | 
 |     /* End of the prefix is one path '/' later, capturing the | 
 |        virtual block device ID. Example: 768 */ | 
 |     auto end = path.find('/', start); | 
 |     if (end == std::string::npos) return false; | 
 |  | 
 |     auto length = end - start; | 
 |     if (length == 0) return false; | 
 |  | 
 |     *result = path.substr(start, length); | 
 |     return true; | 
 | } | 
 |  | 
 | Permissions::Permissions(const std::string& name, mode_t perm, uid_t uid, gid_t gid) | 
 |     : name_(name), perm_(perm), uid_(uid), gid_(gid), prefix_(false), wildcard_(false) { | 
 |     // Set 'prefix_' or 'wildcard_' based on the below cases: | 
 |     // | 
 |     // 1) No '*' in 'name' -> Neither are set and Match() checks a given path for strict | 
 |     //    equality with 'name' | 
 |     // | 
 |     // 2) '*' only appears as the last character in 'name' -> 'prefix'_ is set to true and | 
 |     //    Match() checks if 'name' is a prefix of a given path. | 
 |     // | 
 |     // 3) '*' appears elsewhere -> 'wildcard_' is set to true and Match() uses fnmatch() | 
 |     //    with FNM_PATHNAME to compare 'name' to a given path. | 
 |  | 
 |     auto wildcard_position = name_.find('*'); | 
 |     if (wildcard_position != std::string::npos) { | 
 |         if (wildcard_position == name_.length() - 1) { | 
 |             prefix_ = true; | 
 |             name_.pop_back(); | 
 |         } else { | 
 |             wildcard_ = true; | 
 |         } | 
 |     } | 
 | } | 
 |  | 
 | bool Permissions::Match(const std::string& path) const { | 
 |     if (prefix_) return StartsWith(path, name_); | 
 |     if (wildcard_) return fnmatch(name_.c_str(), path.c_str(), FNM_PATHNAME) == 0; | 
 |     return path == name_; | 
 | } | 
 |  | 
 | bool SysfsPermissions::MatchWithSubsystem(const std::string& path, | 
 |                                           const std::string& subsystem) const { | 
 |     std::string path_basename = Basename(path); | 
 |     if (name().find(subsystem) != std::string::npos) { | 
 |         if (Match("/sys/class/" + subsystem + "/" + path_basename)) return true; | 
 |         if (Match("/sys/bus/" + subsystem + "/devices/" + path_basename)) return true; | 
 |     } | 
 |     return Match(path); | 
 | } | 
 |  | 
 | void SysfsPermissions::SetPermissions(const std::string& path) const { | 
 |     std::string attribute_file = path + "/" + attribute_; | 
 |     LOG(VERBOSE) << "fixup " << attribute_file << " " << uid() << " " << gid() << " " << std::oct | 
 |                  << perm(); | 
 |  | 
 |     if (access(attribute_file.c_str(), F_OK) == 0) { | 
 |         if (chown(attribute_file.c_str(), uid(), gid()) != 0) { | 
 |             PLOG(ERROR) << "chown(" << attribute_file << ", " << uid() << ", " << gid() | 
 |                         << ") failed"; | 
 |         } | 
 |         if (chmod(attribute_file.c_str(), perm()) != 0) { | 
 |             PLOG(ERROR) << "chmod(" << attribute_file << ", " << perm() << ") failed"; | 
 |         } | 
 |     } | 
 | } | 
 |  | 
 | // Given a path that may start with a platform device, find the parent platform device by finding a | 
 | // parent directory with a 'subsystem' symlink that points to the platform bus. | 
 | // If it doesn't start with a platform device, return false | 
 | bool DeviceHandler::FindPlatformDevice(std::string path, std::string* platform_device_path) const { | 
 |     platform_device_path->clear(); | 
 |  | 
 |     // Uevents don't contain the mount point, so we need to add it here. | 
 |     path.insert(0, sysfs_mount_point_); | 
 |  | 
 |     std::string directory = Dirname(path); | 
 |  | 
 |     while (directory != "/" && directory != ".") { | 
 |         std::string subsystem_link_path; | 
 |         if (Realpath(directory + "/subsystem", &subsystem_link_path) && | 
 |             subsystem_link_path == sysfs_mount_point_ + "/bus/platform") { | 
 |             // We need to remove the mount point that we added above before returning. | 
 |             directory.erase(0, sysfs_mount_point_.size()); | 
 |             *platform_device_path = directory; | 
 |             return true; | 
 |         } | 
 |  | 
 |         auto last_slash = path.rfind('/'); | 
 |         if (last_slash == std::string::npos) return false; | 
 |  | 
 |         path.erase(last_slash); | 
 |         directory = Dirname(path); | 
 |     } | 
 |  | 
 |     return false; | 
 | } | 
 |  | 
 | void DeviceHandler::FixupSysPermissions(const std::string& upath, | 
 |                                         const std::string& subsystem) const { | 
 |     // upaths omit the "/sys" that paths in this list | 
 |     // contain, so we prepend it... | 
 |     std::string path = "/sys" + upath; | 
 |  | 
 |     for (const auto& s : sysfs_permissions_) { | 
 |         if (s.MatchWithSubsystem(path, subsystem)) s.SetPermissions(path); | 
 |     } | 
 |  | 
 |     if (!skip_restorecon_ && access(path.c_str(), F_OK) == 0) { | 
 |         LOG(VERBOSE) << "restorecon_recursive: " << path; | 
 |         if (selinux_android_restorecon(path.c_str(), SELINUX_ANDROID_RESTORECON_RECURSE) != 0) { | 
 |             PLOG(ERROR) << "selinux_android_restorecon(" << path << ") failed"; | 
 |         } | 
 |     } | 
 | } | 
 |  | 
 | std::tuple<mode_t, uid_t, gid_t> DeviceHandler::GetDevicePermissions( | 
 |     const std::string& path, const std::vector<std::string>& links) const { | 
 |     // Search the perms list in reverse so that ueventd.$hardware can override ueventd.rc. | 
 |     for (auto it = dev_permissions_.crbegin(); it != dev_permissions_.crend(); ++it) { | 
 |         if (it->Match(path) || std::any_of(links.cbegin(), links.cend(), | 
 |                                            [it](const auto& link) { return it->Match(link); })) { | 
 |             return {it->perm(), it->uid(), it->gid()}; | 
 |         } | 
 |     } | 
 |     /* Default if nothing found. */ | 
 |     return {0600, 0, 0}; | 
 | } | 
 |  | 
 | void DeviceHandler::MakeDevice(const std::string& path, bool block, int major, int minor, | 
 |                                const std::vector<std::string>& links) const { | 
 |     auto[mode, uid, gid] = GetDevicePermissions(path, links); | 
 |     mode |= (block ? S_IFBLK : S_IFCHR); | 
 |  | 
 |     std::string secontext; | 
 |     if (!SelabelLookupFileContextBestMatch(path, links, mode, &secontext)) { | 
 |         PLOG(ERROR) << "Device '" << path << "' not created; cannot find SELinux label"; | 
 |         return; | 
 |     } | 
 |     if (!secontext.empty()) { | 
 |         setfscreatecon(secontext.c_str()); | 
 |     } | 
 |  | 
 |     dev_t dev = makedev(major, minor); | 
 |     /* Temporarily change egid to avoid race condition setting the gid of the | 
 |      * device node. Unforunately changing the euid would prevent creation of | 
 |      * some device nodes, so the uid has to be set with chown() and is still | 
 |      * racy. Fixing the gid race at least fixed the issue with system_server | 
 |      * opening dynamic input devices under the AID_INPUT gid. */ | 
 |     if (setegid(gid)) { | 
 |         PLOG(ERROR) << "setegid(" << gid << ") for " << path << " device failed"; | 
 |         goto out; | 
 |     } | 
 |     /* If the node already exists update its SELinux label to handle cases when | 
 |      * it was created with the wrong context during coldboot procedure. */ | 
 |     if (mknod(path.c_str(), mode, dev) && (errno == EEXIST) && !secontext.empty()) { | 
 |         char* fcon = nullptr; | 
 |         int rc = lgetfilecon(path.c_str(), &fcon); | 
 |         if (rc < 0) { | 
 |             PLOG(ERROR) << "Cannot get SELinux label on '" << path << "' device"; | 
 |             goto out; | 
 |         } | 
 |  | 
 |         bool different = fcon != secontext; | 
 |         freecon(fcon); | 
 |  | 
 |         if (different && lsetfilecon(path.c_str(), secontext.c_str())) { | 
 |             PLOG(ERROR) << "Cannot set '" << secontext << "' SELinux label on '" << path | 
 |                         << "' device"; | 
 |         } | 
 |     } | 
 |  | 
 | out: | 
 |     chown(path.c_str(), uid, -1); | 
 |     if (setegid(AID_ROOT)) { | 
 |         PLOG(FATAL) << "setegid(AID_ROOT) failed"; | 
 |     } | 
 |  | 
 |     if (!secontext.empty()) { | 
 |         setfscreatecon(nullptr); | 
 |     } | 
 | } | 
 |  | 
 | // replaces any unacceptable characters with '_', the | 
 | // length of the resulting string is equal to the input string | 
 | void SanitizePartitionName(std::string* string) { | 
 |     const char* accept = | 
 |         "abcdefghijklmnopqrstuvwxyz" | 
 |         "ABCDEFGHIJKLMNOPQRSTUVWXYZ" | 
 |         "0123456789" | 
 |         "_-."; | 
 |  | 
 |     if (!string) return; | 
 |  | 
 |     std::string::size_type pos = 0; | 
 |     while ((pos = string->find_first_not_of(accept, pos)) != std::string::npos) { | 
 |         (*string)[pos] = '_'; | 
 |     } | 
 | } | 
 |  | 
 | std::vector<std::string> DeviceHandler::GetBlockDeviceSymlinks(const Uevent& uevent) const { | 
 |     std::string device; | 
 |     std::string type; | 
 |  | 
 |     if (FindPlatformDevice(uevent.path, &device)) { | 
 |         // Skip /devices/platform or /devices/ if present | 
 |         static const std::string devices_platform_prefix = "/devices/platform/"; | 
 |         static const std::string devices_prefix = "/devices/"; | 
 |  | 
 |         if (StartsWith(device, devices_platform_prefix)) { | 
 |             device = device.substr(devices_platform_prefix.length()); | 
 |         } else if (StartsWith(device, devices_prefix)) { | 
 |             device = device.substr(devices_prefix.length()); | 
 |         } | 
 |  | 
 |         type = "platform"; | 
 |     } else if (FindPciDevicePrefix(uevent.path, &device)) { | 
 |         type = "pci"; | 
 |     } else if (FindVbdDevicePrefix(uevent.path, &device)) { | 
 |         type = "vbd"; | 
 |     } else { | 
 |         return {}; | 
 |     } | 
 |  | 
 |     std::vector<std::string> links; | 
 |  | 
 |     LOG(VERBOSE) << "found " << type << " device " << device; | 
 |  | 
 |     auto link_path = "/dev/block/" + type + "/" + device; | 
 |  | 
 |     bool is_boot_device = boot_devices_.find(device) != boot_devices_.end(); | 
 |     if (!uevent.partition_name.empty()) { | 
 |         std::string partition_name_sanitized(uevent.partition_name); | 
 |         SanitizePartitionName(&partition_name_sanitized); | 
 |         if (partition_name_sanitized != uevent.partition_name) { | 
 |             LOG(VERBOSE) << "Linking partition '" << uevent.partition_name << "' as '" | 
 |                          << partition_name_sanitized << "'"; | 
 |         } | 
 |         links.emplace_back(link_path + "/by-name/" + partition_name_sanitized); | 
 |         // Adds symlink: /dev/block/by-name/<partition_name>. | 
 |         if (is_boot_device) { | 
 |             links.emplace_back("/dev/block/by-name/" + partition_name_sanitized); | 
 |         } | 
 |     } else if (is_boot_device) { | 
 |         // If we don't have a partition name but we are a partition on a boot device, create a | 
 |         // symlink of /dev/block/by-name/<device_name> for symmetry. | 
 |         links.emplace_back("/dev/block/by-name/" + uevent.device_name); | 
 |     } | 
 |  | 
 |     auto last_slash = uevent.path.rfind('/'); | 
 |     links.emplace_back(link_path + "/" + uevent.path.substr(last_slash + 1)); | 
 |  | 
 |     return links; | 
 | } | 
 |  | 
 | void DeviceHandler::HandleDevice(const std::string& action, const std::string& devpath, bool block, | 
 |                                  int major, int minor, const std::vector<std::string>& links) const { | 
 |     if (action == "add") { | 
 |         MakeDevice(devpath, block, major, minor, links); | 
 |         for (const auto& link : links) { | 
 |             if (!mkdir_recursive(Dirname(link), 0755)) { | 
 |                 PLOG(ERROR) << "Failed to create directory " << Dirname(link); | 
 |             } | 
 |  | 
 |             if (symlink(devpath.c_str(), link.c_str())) { | 
 |                 if (errno != EEXIST) { | 
 |                     PLOG(ERROR) << "Failed to symlink " << devpath << " to " << link; | 
 |                 } else if (std::string link_path; | 
 |                            Readlink(link, &link_path) && link_path != devpath) { | 
 |                     PLOG(ERROR) << "Failed to symlink " << devpath << " to " << link | 
 |                                 << ", which already links to: " << link_path; | 
 |                 } | 
 |             } | 
 |         } | 
 |     } | 
 |  | 
 |     if (action == "remove") { | 
 |         for (const auto& link : links) { | 
 |             std::string link_path; | 
 |             if (Readlink(link, &link_path) && link_path == devpath) { | 
 |                 unlink(link.c_str()); | 
 |             } | 
 |         } | 
 |         unlink(devpath.c_str()); | 
 |     } | 
 | } | 
 |  | 
 | void DeviceHandler::HandleUevent(const Uevent& uevent) { | 
 |     if (uevent.action == "add" || uevent.action == "change" || uevent.action == "online") { | 
 |         FixupSysPermissions(uevent.path, uevent.subsystem); | 
 |     } | 
 |  | 
 |     // if it's not a /dev device, nothing to do | 
 |     if (uevent.major < 0 || uevent.minor < 0) return; | 
 |  | 
 |     std::string devpath; | 
 |     std::vector<std::string> links; | 
 |     bool block = false; | 
 |  | 
 |     if (uevent.subsystem == "block") { | 
 |         block = true; | 
 |         devpath = "/dev/block/" + Basename(uevent.path); | 
 |  | 
 |         if (StartsWith(uevent.path, "/devices")) { | 
 |             links = GetBlockDeviceSymlinks(uevent); | 
 |         } | 
 |     } else if (const auto subsystem = | 
 |                    std::find(subsystems_.cbegin(), subsystems_.cend(), uevent.subsystem); | 
 |                subsystem != subsystems_.cend()) { | 
 |         devpath = subsystem->ParseDevPath(uevent); | 
 |     } else if (uevent.subsystem == "usb") { | 
 |         if (!uevent.device_name.empty()) { | 
 |             devpath = "/dev/" + uevent.device_name; | 
 |         } else { | 
 |             // This imitates the file system that would be created | 
 |             // if we were using devfs instead. | 
 |             // Minors are broken up into groups of 128, starting at "001" | 
 |             int bus_id = uevent.minor / 128 + 1; | 
 |             int device_id = uevent.minor % 128 + 1; | 
 |             devpath = StringPrintf("/dev/bus/usb/%03d/%03d", bus_id, device_id); | 
 |         } | 
 |     } else if (StartsWith(uevent.subsystem, "usb")) { | 
 |         // ignore other USB events | 
 |         return; | 
 |     } else { | 
 |         devpath = "/dev/" + Basename(uevent.path); | 
 |     } | 
 |  | 
 |     mkdir_recursive(Dirname(devpath), 0755); | 
 |  | 
 |     HandleDevice(uevent.action, devpath, block, uevent.major, uevent.minor, links); | 
 | } | 
 |  | 
 | void DeviceHandler::ColdbootDone() { | 
 |     skip_restorecon_ = false; | 
 | } | 
 |  | 
 | DeviceHandler::DeviceHandler(std::vector<Permissions> dev_permissions, | 
 |                              std::vector<SysfsPermissions> sysfs_permissions, | 
 |                              std::vector<Subsystem> subsystems, std::set<std::string> boot_devices, | 
 |                              bool skip_restorecon) | 
 |     : dev_permissions_(std::move(dev_permissions)), | 
 |       sysfs_permissions_(std::move(sysfs_permissions)), | 
 |       subsystems_(std::move(subsystems)), | 
 |       boot_devices_(std::move(boot_devices)), | 
 |       skip_restorecon_(skip_restorecon), | 
 |       sysfs_mount_point_("/sys") {} | 
 |  | 
 | DeviceHandler::DeviceHandler() | 
 |     : DeviceHandler(std::vector<Permissions>{}, std::vector<SysfsPermissions>{}, | 
 |                     std::vector<Subsystem>{}, std::set<std::string>{}, false) {} | 
 |  | 
 | }  // namespace init | 
 | }  // namespace android |