| /* |
| * Copyright (C) 2012-2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| // for manual checking of stale entries during LogBuffer::erase() |
| //#define DEBUG_CHECK_FOR_STALE_ENTRIES |
| |
| #include <ctype.h> |
| #include <errno.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <sys/cdefs.h> |
| #include <sys/user.h> |
| #include <time.h> |
| #include <unistd.h> |
| |
| #include <unordered_map> |
| |
| #include <cutils/properties.h> |
| #include <private/android_logger.h> |
| |
| #include "LogBuffer.h" |
| #include "LogKlog.h" |
| #include "LogReader.h" |
| |
| #ifndef __predict_false |
| #define __predict_false(exp) __builtin_expect((exp) != 0, 0) |
| #endif |
| |
| // Default |
| #define log_buffer_size(id) mMaxSize[id] |
| |
| void LogBuffer::init() { |
| log_id_for_each(i) { |
| mLastSet[i] = false; |
| mLast[i] = mLogElements.begin(); |
| |
| if (setSize(i, __android_logger_get_buffer_size(i))) { |
| setSize(i, LOG_BUFFER_MIN_SIZE); |
| } |
| } |
| bool lastMonotonic = monotonic; |
| monotonic = android_log_clockid() == CLOCK_MONOTONIC; |
| if (lastMonotonic != monotonic) { |
| // |
| // Fixup all timestamps, may not be 100% accurate, but better than |
| // throwing what we have away when we get 'surprised' by a change. |
| // In-place element fixup so no need to check reader-lock. Entries |
| // should already be in timestamp order, but we could end up with a |
| // few out-of-order entries if new monotonics come in before we |
| // are notified of the reinit change in status. A Typical example would |
| // be: |
| // --------- beginning of system |
| // 10.494082 184 201 D Cryptfs : Just triggered post_fs_data |
| // --------- beginning of kernel |
| // 0.000000 0 0 I : Initializing cgroup subsys |
| // as the act of mounting /data would trigger persist.logd.timestamp to |
| // be corrected. 1/30 corner case YMMV. |
| // |
| pthread_mutex_lock(&mLogElementsLock); |
| LogBufferElementCollection::iterator it = mLogElements.begin(); |
| while((it != mLogElements.end())) { |
| LogBufferElement *e = *it; |
| if (monotonic) { |
| if (!android::isMonotonic(e->mRealTime)) { |
| LogKlog::convertRealToMonotonic(e->mRealTime); |
| } |
| } else { |
| if (android::isMonotonic(e->mRealTime)) { |
| LogKlog::convertMonotonicToReal(e->mRealTime); |
| } |
| } |
| ++it; |
| } |
| pthread_mutex_unlock(&mLogElementsLock); |
| } |
| |
| // We may have been triggered by a SIGHUP. Release any sleeping reader |
| // threads to dump their current content. |
| // |
| // NB: this is _not_ performed in the context of a SIGHUP, it is |
| // performed during startup, and in context of reinit administrative thread |
| LogTimeEntry::lock(); |
| |
| LastLogTimes::iterator times = mTimes.begin(); |
| while(times != mTimes.end()) { |
| LogTimeEntry *entry = (*times); |
| if (entry->owned_Locked()) { |
| entry->triggerReader_Locked(); |
| } |
| times++; |
| } |
| |
| LogTimeEntry::unlock(); |
| } |
| |
| LogBuffer::LogBuffer(LastLogTimes *times): |
| monotonic(android_log_clockid() == CLOCK_MONOTONIC), |
| mTimes(*times) { |
| pthread_mutex_init(&mLogElementsLock, NULL); |
| |
| init(); |
| } |
| |
| int LogBuffer::log(log_id_t log_id, log_time realtime, |
| uid_t uid, pid_t pid, pid_t tid, |
| const char *msg, unsigned short len) { |
| if ((log_id >= LOG_ID_MAX) || (log_id < 0)) { |
| return -EINVAL; |
| } |
| |
| LogBufferElement *elem = new LogBufferElement(log_id, realtime, |
| uid, pid, tid, msg, len); |
| if (log_id != LOG_ID_SECURITY) { |
| int prio = ANDROID_LOG_INFO; |
| const char *tag = NULL; |
| size_t len = 0; |
| if (log_id == LOG_ID_EVENTS) { |
| tag = android::tagToName(&len, elem->getTag()); |
| } else { |
| prio = *msg; |
| tag = msg + 1; |
| len = strlen(tag); |
| } |
| if (!__android_log_is_loggable_len(prio, tag, len, ANDROID_LOG_VERBOSE)) { |
| // Log traffic received to total |
| pthread_mutex_lock(&mLogElementsLock); |
| stats.add(elem); |
| stats.subtract(elem); |
| pthread_mutex_unlock(&mLogElementsLock); |
| delete elem; |
| return -EACCES; |
| } |
| } |
| |
| pthread_mutex_lock(&mLogElementsLock); |
| |
| // Insert elements in time sorted order if possible |
| // NB: if end is region locked, place element at end of list |
| LogBufferElementCollection::iterator it = mLogElements.end(); |
| LogBufferElementCollection::iterator last = it; |
| while (last != mLogElements.begin()) { |
| --it; |
| if ((*it)->getRealTime() <= realtime) { |
| break; |
| } |
| last = it; |
| } |
| |
| if (last == mLogElements.end()) { |
| mLogElements.push_back(elem); |
| } else { |
| uint64_t end = 1; |
| bool end_set = false; |
| bool end_always = false; |
| |
| LogTimeEntry::lock(); |
| |
| LastLogTimes::iterator times = mTimes.begin(); |
| while(times != mTimes.end()) { |
| LogTimeEntry *entry = (*times); |
| if (entry->owned_Locked()) { |
| if (!entry->mNonBlock) { |
| end_always = true; |
| break; |
| } |
| if (!end_set || (end <= entry->mEnd)) { |
| end = entry->mEnd; |
| end_set = true; |
| } |
| } |
| times++; |
| } |
| |
| if (end_always |
| || (end_set && (end >= (*last)->getSequence()))) { |
| mLogElements.push_back(elem); |
| } else { |
| mLogElements.insert(last,elem); |
| } |
| |
| LogTimeEntry::unlock(); |
| } |
| |
| stats.add(elem); |
| maybePrune(log_id); |
| pthread_mutex_unlock(&mLogElementsLock); |
| |
| return len; |
| } |
| |
| // Prune at most 10% of the log entries or maxPrune, whichever is less. |
| // |
| // mLogElementsLock must be held when this function is called. |
| void LogBuffer::maybePrune(log_id_t id) { |
| size_t sizes = stats.sizes(id); |
| unsigned long maxSize = log_buffer_size(id); |
| if (sizes > maxSize) { |
| size_t sizeOver = sizes - ((maxSize * 9) / 10); |
| size_t elements = stats.realElements(id); |
| size_t minElements = elements / 100; |
| if (minElements < minPrune) { |
| minElements = minPrune; |
| } |
| unsigned long pruneRows = elements * sizeOver / sizes; |
| if (pruneRows < minElements) { |
| pruneRows = minElements; |
| } |
| if (pruneRows > maxPrune) { |
| pruneRows = maxPrune; |
| } |
| prune(id, pruneRows); |
| } |
| } |
| |
| LogBufferElementCollection::iterator LogBuffer::erase( |
| LogBufferElementCollection::iterator it, bool coalesce) { |
| LogBufferElement *element = *it; |
| log_id_t id = element->getLogId(); |
| |
| // Remove iterator references in the various lists that will become stale |
| // after the element is erased from the main logging list. |
| |
| { // start of scope for found iterator |
| int key = ((id == LOG_ID_EVENTS) || (id == LOG_ID_SECURITY)) ? |
| element->getTag() : element->getUid(); |
| LogBufferIteratorMap::iterator found = mLastWorst[id].find(key); |
| if ((found != mLastWorst[id].end()) && (it == found->second)) { |
| mLastWorst[id].erase(found); |
| } |
| } |
| |
| { // start of scope for pid found iterator |
| // element->getUid() may not be AID_SYSTEM for next-best-watermark. |
| // will not assume id != LOG_ID_EVENTS or LOG_ID_SECURITY for KISS and |
| // long term code stability, find() check should be fast for those ids. |
| LogBufferPidIteratorMap::iterator found = |
| mLastWorstPidOfSystem[id].find(element->getPid()); |
| if ((found != mLastWorstPidOfSystem[id].end()) |
| && (it == found->second)) { |
| mLastWorstPidOfSystem[id].erase(found); |
| } |
| } |
| |
| bool setLast[LOG_ID_MAX]; |
| bool doSetLast = false; |
| log_id_for_each(i) { |
| doSetLast |= setLast[i] = mLastSet[i] && (it == mLast[i]); |
| } |
| #ifdef DEBUG_CHECK_FOR_STALE_ENTRIES |
| LogBufferElementCollection::iterator bad = it; |
| int key = ((id == LOG_ID_EVENTS) || (id == LOG_ID_SECURITY)) ? |
| element->getTag() : element->getUid(); |
| #endif |
| it = mLogElements.erase(it); |
| if (doSetLast) { |
| log_id_for_each(i) { |
| if (setLast[i]) { |
| if (__predict_false(it == mLogElements.end())) { // impossible |
| mLastSet[i] = false; |
| mLast[i] = mLogElements.begin(); |
| } else { |
| mLast[i] = it; // push down the road as next-best-watermark |
| } |
| } |
| } |
| } |
| #ifdef DEBUG_CHECK_FOR_STALE_ENTRIES |
| log_id_for_each(i) { |
| for(auto b : mLastWorst[i]) { |
| if (bad == b.second) { |
| android::prdebug("stale mLastWorst[%d] key=%d mykey=%d\n", |
| i, b.first, key); |
| } |
| } |
| for(auto b : mLastWorstPidOfSystem[i]) { |
| if (bad == b.second) { |
| android::prdebug("stale mLastWorstPidOfSystem[%d] pid=%d\n", |
| i, b.first); |
| } |
| } |
| if (mLastSet[i] && (bad == mLast[i])) { |
| android::prdebug("stale mLast[%d]\n", i); |
| mLastSet[i] = false; |
| mLast[i] = mLogElements.begin(); |
| } |
| } |
| #endif |
| if (coalesce) { |
| stats.erase(element); |
| } else { |
| stats.subtract(element); |
| } |
| delete element; |
| |
| return it; |
| } |
| |
| // Define a temporary mechanism to report the last LogBufferElement pointer |
| // for the specified uid, pid and tid. Used below to help merge-sort when |
| // pruning for worst UID. |
| class LogBufferElementKey { |
| const union { |
| struct { |
| uint16_t uid; |
| uint16_t pid; |
| uint16_t tid; |
| uint16_t padding; |
| } __packed; |
| uint64_t value; |
| } __packed; |
| |
| public: |
| LogBufferElementKey(uid_t uid, pid_t pid, pid_t tid): |
| uid(uid), |
| pid(pid), |
| tid(tid), |
| padding(0) { |
| } |
| explicit LogBufferElementKey(uint64_t key):value(key) { } |
| |
| uint64_t getKey() { return value; } |
| }; |
| |
| class LogBufferElementLast { |
| |
| typedef std::unordered_map<uint64_t, LogBufferElement *> LogBufferElementMap; |
| LogBufferElementMap map; |
| |
| public: |
| |
| bool coalesce(LogBufferElement *element, unsigned short dropped) { |
| LogBufferElementKey key(element->getUid(), |
| element->getPid(), |
| element->getTid()); |
| LogBufferElementMap::iterator it = map.find(key.getKey()); |
| if (it != map.end()) { |
| LogBufferElement *found = it->second; |
| unsigned short moreDropped = found->getDropped(); |
| if ((dropped + moreDropped) > USHRT_MAX) { |
| map.erase(it); |
| } else { |
| found->setDropped(dropped + moreDropped); |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| void add(LogBufferElement *element) { |
| LogBufferElementKey key(element->getUid(), |
| element->getPid(), |
| element->getTid()); |
| map[key.getKey()] = element; |
| } |
| |
| inline void clear() { |
| map.clear(); |
| } |
| |
| void clear(LogBufferElement *element) { |
| uint64_t current = element->getRealTime().nsec() |
| - (EXPIRE_RATELIMIT * NS_PER_SEC); |
| for(LogBufferElementMap::iterator it = map.begin(); it != map.end();) { |
| LogBufferElement *mapElement = it->second; |
| if ((mapElement->getDropped() >= EXPIRE_THRESHOLD) |
| && (current > mapElement->getRealTime().nsec())) { |
| it = map.erase(it); |
| } else { |
| ++it; |
| } |
| } |
| } |
| |
| }; |
| |
| // prune "pruneRows" of type "id" from the buffer. |
| // |
| // This garbage collection task is used to expire log entries. It is called to |
| // remove all logs (clear), all UID logs (unprivileged clear), or every |
| // 256 or 10% of the total logs (whichever is less) to prune the logs. |
| // |
| // First there is a prep phase where we discover the reader region lock that |
| // acts as a backstop to any pruning activity to stop there and go no further. |
| // |
| // There are three major pruning loops that follow. All expire from the oldest |
| // entries. Since there are multiple log buffers, the Android logging facility |
| // will appear to drop entries 'in the middle' when looking at multiple log |
| // sources and buffers. This effect is slightly more prominent when we prune |
| // the worst offender by logging source. Thus the logs slowly loose content |
| // and value as you move back in time. This is preferred since chatty sources |
| // invariably move the logs value down faster as less chatty sources would be |
| // expired in the noise. |
| // |
| // The first loop performs blacklisting and worst offender pruning. Falling |
| // through when there are no notable worst offenders and have not hit the |
| // region lock preventing further worst offender pruning. This loop also looks |
| // after managing the chatty log entries and merging to help provide |
| // statistical basis for blame. The chatty entries are not a notification of |
| // how much logs you may have, but instead represent how much logs you would |
| // have had in a virtual log buffer that is extended to cover all the in-memory |
| // logs without loss. They last much longer than the represented pruned logs |
| // since they get multiplied by the gains in the non-chatty log sources. |
| // |
| // The second loop get complicated because an algorithm of watermarks and |
| // history is maintained to reduce the order and keep processing time |
| // down to a minimum at scale. These algorithms can be costly in the face |
| // of larger log buffers, or severly limited processing time granted to a |
| // background task at lowest priority. |
| // |
| // This second loop does straight-up expiration from the end of the logs |
| // (again, remember for the specified log buffer id) but does some whitelist |
| // preservation. Thus whitelist is a Hail Mary low priority, blacklists and |
| // spam filtration all take priority. This second loop also checks if a region |
| // lock is causing us to buffer too much in the logs to help the reader(s), |
| // and will tell the slowest reader thread to skip log entries, and if |
| // persistent and hits a further threshold, kill the reader thread. |
| // |
| // The third thread is optional, and only gets hit if there was a whitelist |
| // and more needs to be pruned against the backstop of the region lock. |
| // |
| // mLogElementsLock must be held when this function is called. |
| // |
| bool LogBuffer::prune(log_id_t id, unsigned long pruneRows, uid_t caller_uid) { |
| LogTimeEntry *oldest = NULL; |
| bool busy = false; |
| bool clearAll = pruneRows == ULONG_MAX; |
| |
| LogTimeEntry::lock(); |
| |
| // Region locked? |
| LastLogTimes::iterator times = mTimes.begin(); |
| while(times != mTimes.end()) { |
| LogTimeEntry *entry = (*times); |
| if (entry->owned_Locked() && entry->isWatching(id) |
| && (!oldest || |
| (oldest->mStart > entry->mStart) || |
| ((oldest->mStart == entry->mStart) && |
| (entry->mTimeout.tv_sec || entry->mTimeout.tv_nsec)))) { |
| oldest = entry; |
| } |
| times++; |
| } |
| |
| LogBufferElementCollection::iterator it; |
| |
| if (__predict_false(caller_uid != AID_ROOT)) { // unlikely |
| // Only here if clear all request from non system source, so chatty |
| // filter logistics is not required. |
| it = mLastSet[id] ? mLast[id] : mLogElements.begin(); |
| while (it != mLogElements.end()) { |
| LogBufferElement *element = *it; |
| |
| if ((element->getLogId() != id) || (element->getUid() != caller_uid)) { |
| ++it; |
| continue; |
| } |
| |
| if (!mLastSet[id] || ((*mLast[id])->getLogId() != id)) { |
| mLast[id] = it; |
| mLastSet[id] = true; |
| } |
| |
| if (oldest && (oldest->mStart <= element->getSequence())) { |
| busy = true; |
| if (oldest->mTimeout.tv_sec || oldest->mTimeout.tv_nsec) { |
| oldest->triggerReader_Locked(); |
| } else { |
| oldest->triggerSkip_Locked(id, pruneRows); |
| } |
| break; |
| } |
| |
| it = erase(it); |
| if (--pruneRows == 0) { |
| break; |
| } |
| } |
| LogTimeEntry::unlock(); |
| return busy; |
| } |
| |
| // prune by worst offenders; by blacklist, UID, and by PID of system UID |
| bool hasBlacklist = (id != LOG_ID_SECURITY) && mPrune.naughty(); |
| while (!clearAll && (pruneRows > 0)) { |
| // recalculate the worst offender on every batched pass |
| int worst = -1; // not valid for getUid() or getKey() |
| size_t worst_sizes = 0; |
| size_t second_worst_sizes = 0; |
| pid_t worstPid = 0; // POSIX guarantees PID != 0 |
| |
| if (worstUidEnabledForLogid(id) && mPrune.worstUidEnabled()) { |
| // Calculate threshold as 12.5% of available storage |
| size_t threshold = log_buffer_size(id) / 8; |
| |
| if ((id == LOG_ID_EVENTS) || (id == LOG_ID_SECURITY)) { |
| stats.sortTags(AID_ROOT, (pid_t)0, 2, id).findWorst( |
| worst, worst_sizes, second_worst_sizes, threshold); |
| // per-pid filter for AID_SYSTEM sources is too complex |
| } else { |
| stats.sort(AID_ROOT, (pid_t)0, 2, id).findWorst( |
| worst, worst_sizes, second_worst_sizes, threshold); |
| |
| if ((worst == AID_SYSTEM) && mPrune.worstPidOfSystemEnabled()) { |
| stats.sortPids(worst, (pid_t)0, 2, id).findWorst( |
| worstPid, worst_sizes, second_worst_sizes); |
| } |
| } |
| } |
| |
| // skip if we have neither worst nor naughty filters |
| if ((worst == -1) && !hasBlacklist) { |
| break; |
| } |
| |
| bool kick = false; |
| bool leading = true; |
| it = mLastSet[id] ? mLast[id] : mLogElements.begin(); |
| // Perform at least one mandatory garbage collection cycle in following |
| // - clear leading chatty tags |
| // - coalesce chatty tags |
| // - check age-out of preserved logs |
| bool gc = pruneRows <= 1; |
| if (!gc && (worst != -1)) { |
| { // begin scope for worst found iterator |
| LogBufferIteratorMap::iterator found = mLastWorst[id].find(worst); |
| if ((found != mLastWorst[id].end()) |
| && (found->second != mLogElements.end())) { |
| leading = false; |
| it = found->second; |
| } |
| } |
| if (worstPid) { // begin scope for pid worst found iterator |
| // FYI: worstPid only set if !LOG_ID_EVENTS and |
| // !LOG_ID_SECURITY, not going to make that assumption ... |
| LogBufferPidIteratorMap::iterator found |
| = mLastWorstPidOfSystem[id].find(worstPid); |
| if ((found != mLastWorstPidOfSystem[id].end()) |
| && (found->second != mLogElements.end())) { |
| leading = false; |
| it = found->second; |
| } |
| } |
| } |
| static const timespec too_old = { |
| EXPIRE_HOUR_THRESHOLD * 60 * 60, 0 |
| }; |
| LogBufferElementCollection::iterator lastt; |
| lastt = mLogElements.end(); |
| --lastt; |
| LogBufferElementLast last; |
| while (it != mLogElements.end()) { |
| LogBufferElement *element = *it; |
| |
| if (oldest && (oldest->mStart <= element->getSequence())) { |
| busy = true; |
| if (oldest->mTimeout.tv_sec || oldest->mTimeout.tv_nsec) { |
| oldest->triggerReader_Locked(); |
| } |
| break; |
| } |
| |
| if (element->getLogId() != id) { |
| ++it; |
| continue; |
| } |
| // below this point element->getLogId() == id |
| |
| if (leading && (!mLastSet[id] || ((*mLast[id])->getLogId() != id))) { |
| mLast[id] = it; |
| mLastSet[id] = true; |
| } |
| |
| unsigned short dropped = element->getDropped(); |
| |
| // remove any leading drops |
| if (leading && dropped) { |
| it = erase(it); |
| continue; |
| } |
| |
| if (dropped && last.coalesce(element, dropped)) { |
| it = erase(it, true); |
| continue; |
| } |
| |
| int key = ((id == LOG_ID_EVENTS) || (id == LOG_ID_SECURITY)) ? |
| element->getTag() : |
| element->getUid(); |
| |
| if (hasBlacklist && mPrune.naughty(element)) { |
| last.clear(element); |
| it = erase(it); |
| if (dropped) { |
| continue; |
| } |
| |
| pruneRows--; |
| if (pruneRows == 0) { |
| break; |
| } |
| |
| if (key == worst) { |
| kick = true; |
| if (worst_sizes < second_worst_sizes) { |
| break; |
| } |
| worst_sizes -= element->getMsgLen(); |
| } |
| continue; |
| } |
| |
| if ((element->getRealTime() < ((*lastt)->getRealTime() - too_old)) |
| || (element->getRealTime() > (*lastt)->getRealTime())) { |
| break; |
| } |
| |
| if (dropped) { |
| last.add(element); |
| if (worstPid |
| && ((!gc && (element->getPid() == worstPid)) |
| || (mLastWorstPidOfSystem[id].find(element->getPid()) |
| == mLastWorstPidOfSystem[id].end()))) { |
| // element->getUid() may not be AID_SYSTEM, next best |
| // watermark if current one empty. id is not LOG_ID_EVENTS |
| // or LOG_ID_SECURITY because of worstPid check. |
| mLastWorstPidOfSystem[id][element->getPid()] = it; |
| } |
| if ((!gc && !worstPid && (key == worst)) |
| || (mLastWorst[id].find(key) == mLastWorst[id].end())) { |
| mLastWorst[id][key] = it; |
| } |
| ++it; |
| continue; |
| } |
| |
| if ((key != worst) |
| || (worstPid && (element->getPid() != worstPid))) { |
| leading = false; |
| last.clear(element); |
| ++it; |
| continue; |
| } |
| // key == worst below here |
| // If worstPid set, then element->getPid() == worstPid below here |
| |
| pruneRows--; |
| if (pruneRows == 0) { |
| break; |
| } |
| |
| kick = true; |
| |
| unsigned short len = element->getMsgLen(); |
| |
| // do not create any leading drops |
| if (leading) { |
| it = erase(it); |
| } else { |
| stats.drop(element); |
| element->setDropped(1); |
| if (last.coalesce(element, 1)) { |
| it = erase(it, true); |
| } else { |
| last.add(element); |
| if (worstPid && (!gc |
| || (mLastWorstPidOfSystem[id].find(worstPid) |
| == mLastWorstPidOfSystem[id].end()))) { |
| // element->getUid() may not be AID_SYSTEM, next best |
| // watermark if current one empty. id is not |
| // LOG_ID_EVENTS or LOG_ID_SECURITY because of worstPid. |
| mLastWorstPidOfSystem[id][worstPid] = it; |
| } |
| if ((!gc && !worstPid) || |
| (mLastWorst[id].find(worst) == mLastWorst[id].end())) { |
| mLastWorst[id][worst] = it; |
| } |
| ++it; |
| } |
| } |
| if (worst_sizes < second_worst_sizes) { |
| break; |
| } |
| worst_sizes -= len; |
| } |
| last.clear(); |
| |
| if (!kick || !mPrune.worstUidEnabled()) { |
| break; // the following loop will ask bad clients to skip/drop |
| } |
| } |
| |
| bool whitelist = false; |
| bool hasWhitelist = (id != LOG_ID_SECURITY) && mPrune.nice() && !clearAll; |
| it = mLastSet[id] ? mLast[id] : mLogElements.begin(); |
| while((pruneRows > 0) && (it != mLogElements.end())) { |
| LogBufferElement *element = *it; |
| |
| if (element->getLogId() != id) { |
| it++; |
| continue; |
| } |
| |
| if (!mLastSet[id] || ((*mLast[id])->getLogId() != id)) { |
| mLast[id] = it; |
| mLastSet[id] = true; |
| } |
| |
| if (oldest && (oldest->mStart <= element->getSequence())) { |
| busy = true; |
| if (whitelist) { |
| break; |
| } |
| |
| if (stats.sizes(id) > (2 * log_buffer_size(id))) { |
| // kick a misbehaving log reader client off the island |
| oldest->release_Locked(); |
| } else if (oldest->mTimeout.tv_sec || oldest->mTimeout.tv_nsec) { |
| oldest->triggerReader_Locked(); |
| } else { |
| oldest->triggerSkip_Locked(id, pruneRows); |
| } |
| break; |
| } |
| |
| if (hasWhitelist && !element->getDropped() && mPrune.nice(element)) { |
| // WhiteListed |
| whitelist = true; |
| it++; |
| continue; |
| } |
| |
| it = erase(it); |
| pruneRows--; |
| } |
| |
| // Do not save the whitelist if we are reader range limited |
| if (whitelist && (pruneRows > 0)) { |
| it = mLastSet[id] ? mLast[id] : mLogElements.begin(); |
| while((it != mLogElements.end()) && (pruneRows > 0)) { |
| LogBufferElement *element = *it; |
| |
| if (element->getLogId() != id) { |
| ++it; |
| continue; |
| } |
| |
| if (!mLastSet[id] || ((*mLast[id])->getLogId() != id)) { |
| mLast[id] = it; |
| mLastSet[id] = true; |
| } |
| |
| if (oldest && (oldest->mStart <= element->getSequence())) { |
| busy = true; |
| if (stats.sizes(id) > (2 * log_buffer_size(id))) { |
| // kick a misbehaving log reader client off the island |
| oldest->release_Locked(); |
| } else if (oldest->mTimeout.tv_sec || oldest->mTimeout.tv_nsec) { |
| oldest->triggerReader_Locked(); |
| } else { |
| oldest->triggerSkip_Locked(id, pruneRows); |
| } |
| break; |
| } |
| |
| it = erase(it); |
| pruneRows--; |
| } |
| } |
| |
| LogTimeEntry::unlock(); |
| |
| return (pruneRows > 0) && busy; |
| } |
| |
| // clear all rows of type "id" from the buffer. |
| bool LogBuffer::clear(log_id_t id, uid_t uid) { |
| bool busy = true; |
| // If it takes more than 4 tries (seconds) to clear, then kill reader(s) |
| for (int retry = 4;;) { |
| if (retry == 1) { // last pass |
| // Check if it is still busy after the sleep, we say prune |
| // one entry, not another clear run, so we are looking for |
| // the quick side effect of the return value to tell us if |
| // we have a _blocked_ reader. |
| pthread_mutex_lock(&mLogElementsLock); |
| busy = prune(id, 1, uid); |
| pthread_mutex_unlock(&mLogElementsLock); |
| // It is still busy, blocked reader(s), lets kill them all! |
| // otherwise, lets be a good citizen and preserve the slow |
| // readers and let the clear run (below) deal with determining |
| // if we are still blocked and return an error code to caller. |
| if (busy) { |
| LogTimeEntry::lock(); |
| LastLogTimes::iterator times = mTimes.begin(); |
| while (times != mTimes.end()) { |
| LogTimeEntry *entry = (*times); |
| // Killer punch |
| if (entry->owned_Locked() && entry->isWatching(id)) { |
| entry->release_Locked(); |
| } |
| times++; |
| } |
| LogTimeEntry::unlock(); |
| } |
| } |
| pthread_mutex_lock(&mLogElementsLock); |
| busy = prune(id, ULONG_MAX, uid); |
| pthread_mutex_unlock(&mLogElementsLock); |
| if (!busy || !--retry) { |
| break; |
| } |
| sleep (1); // Let reader(s) catch up after notification |
| } |
| return busy; |
| } |
| |
| // get the used space associated with "id". |
| unsigned long LogBuffer::getSizeUsed(log_id_t id) { |
| pthread_mutex_lock(&mLogElementsLock); |
| size_t retval = stats.sizes(id); |
| pthread_mutex_unlock(&mLogElementsLock); |
| return retval; |
| } |
| |
| // set the total space allocated to "id" |
| int LogBuffer::setSize(log_id_t id, unsigned long size) { |
| // Reasonable limits ... |
| if (!__android_logger_valid_buffer_size(size)) { |
| return -1; |
| } |
| pthread_mutex_lock(&mLogElementsLock); |
| log_buffer_size(id) = size; |
| pthread_mutex_unlock(&mLogElementsLock); |
| return 0; |
| } |
| |
| // get the total space allocated to "id" |
| unsigned long LogBuffer::getSize(log_id_t id) { |
| pthread_mutex_lock(&mLogElementsLock); |
| size_t retval = log_buffer_size(id); |
| pthread_mutex_unlock(&mLogElementsLock); |
| return retval; |
| } |
| |
| uint64_t LogBuffer::flushTo( |
| SocketClient *reader, const uint64_t start, |
| bool privileged, bool security, |
| int (*filter)(const LogBufferElement *element, void *arg), void *arg) { |
| LogBufferElementCollection::iterator it; |
| uint64_t max = start; |
| uid_t uid = reader->getUid(); |
| |
| pthread_mutex_lock(&mLogElementsLock); |
| |
| if (start <= 1) { |
| // client wants to start from the beginning |
| it = mLogElements.begin(); |
| } else { |
| // Client wants to start from some specified time. Chances are |
| // we are better off starting from the end of the time sorted list. |
| for (it = mLogElements.end(); it != mLogElements.begin(); /* do nothing */) { |
| --it; |
| LogBufferElement *element = *it; |
| if (element->getSequence() <= start) { |
| it++; |
| break; |
| } |
| } |
| } |
| |
| for (; it != mLogElements.end(); ++it) { |
| LogBufferElement *element = *it; |
| |
| if (!privileged && (element->getUid() != uid)) { |
| continue; |
| } |
| |
| if (!security && (element->getLogId() == LOG_ID_SECURITY)) { |
| continue; |
| } |
| |
| if (element->getSequence() <= start) { |
| continue; |
| } |
| |
| // NB: calling out to another object with mLogElementsLock held (safe) |
| if (filter) { |
| int ret = (*filter)(element, arg); |
| if (ret == false) { |
| continue; |
| } |
| if (ret != true) { |
| break; |
| } |
| } |
| |
| pthread_mutex_unlock(&mLogElementsLock); |
| |
| // range locking in LastLogTimes looks after us |
| max = element->flushTo(reader, this, privileged); |
| |
| if (max == element->FLUSH_ERROR) { |
| return max; |
| } |
| |
| pthread_mutex_lock(&mLogElementsLock); |
| } |
| pthread_mutex_unlock(&mLogElementsLock); |
| |
| return max; |
| } |
| |
| std::string LogBuffer::formatStatistics(uid_t uid, pid_t pid, |
| unsigned int logMask) { |
| pthread_mutex_lock(&mLogElementsLock); |
| |
| std::string ret = stats.format(uid, pid, logMask); |
| |
| pthread_mutex_unlock(&mLogElementsLock); |
| |
| return ret; |
| } |