|  | /* | 
|  | * Copyright (C) 2008 The Android Open Source Project | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | *  * Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | *  * Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in | 
|  | *    the documentation and/or other materials provided with the | 
|  | *    distribution. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS | 
|  | * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE | 
|  | * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, | 
|  | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | 
|  | * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | 
|  | * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED | 
|  | * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | 
|  | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT | 
|  | * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF | 
|  | * SUCH DAMAGE. | 
|  | */ | 
|  |  | 
|  | #include <windows.h> | 
|  | #include <winerror.h> | 
|  | #include <errno.h> | 
|  | #include <usb100.h> | 
|  | #include <adb_api.h> | 
|  | #include <stdio.h> | 
|  |  | 
|  | #include "usb.h" | 
|  |  | 
|  | //#define TRACE_USB 1 | 
|  | #if TRACE_USB | 
|  | #define DBG(x...) fprintf(stderr, x) | 
|  | #else | 
|  | #define DBG(x...) | 
|  | #endif | 
|  |  | 
|  |  | 
|  | /** Structure usb_handle describes our connection to the usb device via | 
|  | AdbWinApi.dll. This structure is returned from usb_open() routine and | 
|  | is expected in each subsequent call that is accessing the device. | 
|  | */ | 
|  | struct usb_handle { | 
|  | /// Handle to USB interface | 
|  | ADBAPIHANDLE  adb_interface; | 
|  |  | 
|  | /// Handle to USB read pipe (endpoint) | 
|  | ADBAPIHANDLE  adb_read_pipe; | 
|  |  | 
|  | /// Handle to USB write pipe (endpoint) | 
|  | ADBAPIHANDLE  adb_write_pipe; | 
|  |  | 
|  | /// Interface name | 
|  | char*         interface_name; | 
|  | }; | 
|  |  | 
|  | /// Class ID assigned to the device by androidusb.sys | 
|  | static const GUID usb_class_id = ANDROID_USB_CLASS_ID; | 
|  |  | 
|  |  | 
|  | /// Checks if interface (device) matches certain criteria | 
|  | int recognized_device(usb_handle* handle, ifc_match_func callback); | 
|  |  | 
|  | /// Opens usb interface (device) by interface (device) name. | 
|  | usb_handle* do_usb_open(const wchar_t* interface_name); | 
|  |  | 
|  | /// Writes data to the opened usb handle | 
|  | int usb_write(usb_handle* handle, const void* data, int len); | 
|  |  | 
|  | /// Reads data using the opened usb handle | 
|  | int usb_read(usb_handle *handle, void* data, int len); | 
|  |  | 
|  | /// Cleans up opened usb handle | 
|  | void usb_cleanup_handle(usb_handle* handle); | 
|  |  | 
|  | /// Cleans up (but don't close) opened usb handle | 
|  | void usb_kick(usb_handle* handle); | 
|  |  | 
|  | /// Closes opened usb handle | 
|  | int usb_close(usb_handle* handle); | 
|  |  | 
|  |  | 
|  | usb_handle* do_usb_open(const wchar_t* interface_name) { | 
|  | // Allocate our handle | 
|  | usb_handle* ret = (usb_handle*)malloc(sizeof(usb_handle)); | 
|  | if (NULL == ret) | 
|  | return NULL; | 
|  |  | 
|  | // Create interface. | 
|  | ret->adb_interface = AdbCreateInterfaceByName(interface_name); | 
|  |  | 
|  | if (NULL == ret->adb_interface) { | 
|  | free(ret); | 
|  | errno = GetLastError(); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | // Open read pipe (endpoint) | 
|  | ret->adb_read_pipe = | 
|  | AdbOpenDefaultBulkReadEndpoint(ret->adb_interface, | 
|  | AdbOpenAccessTypeReadWrite, | 
|  | AdbOpenSharingModeReadWrite); | 
|  | if (NULL != ret->adb_read_pipe) { | 
|  | // Open write pipe (endpoint) | 
|  | ret->adb_write_pipe = | 
|  | AdbOpenDefaultBulkWriteEndpoint(ret->adb_interface, | 
|  | AdbOpenAccessTypeReadWrite, | 
|  | AdbOpenSharingModeReadWrite); | 
|  | if (NULL != ret->adb_write_pipe) { | 
|  | // Save interface name | 
|  | unsigned long name_len = 0; | 
|  |  | 
|  | // First get expected name length | 
|  | AdbGetInterfaceName(ret->adb_interface, | 
|  | NULL, | 
|  | &name_len, | 
|  | true); | 
|  | if (0 != name_len) { | 
|  | ret->interface_name = (char*)malloc(name_len); | 
|  |  | 
|  | if (NULL != ret->interface_name) { | 
|  | // Now save the name | 
|  | if (AdbGetInterfaceName(ret->adb_interface, | 
|  | ret->interface_name, | 
|  | &name_len, | 
|  | true)) { | 
|  | // We're done at this point | 
|  | return ret; | 
|  | } | 
|  | } else { | 
|  | SetLastError(ERROR_OUTOFMEMORY); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | // Something went wrong. | 
|  | errno = GetLastError(); | 
|  | usb_cleanup_handle(ret); | 
|  | free(ret); | 
|  | SetLastError(errno); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | int usb_write(usb_handle* handle, const void* data, int len) { | 
|  | unsigned long time_out = 500 + len * 8; | 
|  | unsigned long written = 0; | 
|  | unsigned count = 0; | 
|  | int ret; | 
|  |  | 
|  | DBG("usb_write %d\n", len); | 
|  | if (NULL != handle) { | 
|  | // Perform write | 
|  | while(len > 0) { | 
|  | int xfer = (len > 4096) ? 4096 : len; | 
|  | ret = AdbWriteEndpointSync(handle->adb_write_pipe, | 
|  | (void*)data, | 
|  | (unsigned long)xfer, | 
|  | &written, | 
|  | time_out); | 
|  | errno = GetLastError(); | 
|  | DBG("AdbWriteEndpointSync returned %d, errno: %d\n", ret, errno); | 
|  | if (ret == 0) { | 
|  | // assume ERROR_INVALID_HANDLE indicates we are disconnected | 
|  | if (errno == ERROR_INVALID_HANDLE) | 
|  | usb_kick(handle); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | count += written; | 
|  | len -= written; | 
|  | data += written; | 
|  |  | 
|  | if (len == 0) | 
|  | return count; | 
|  | } | 
|  | } else { | 
|  | DBG("usb_write NULL handle\n"); | 
|  | SetLastError(ERROR_INVALID_HANDLE); | 
|  | } | 
|  |  | 
|  | DBG("usb_write failed: %d\n", errno); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | int usb_read(usb_handle *handle, void* data, int len) { | 
|  | unsigned long time_out = 500 + len * 8; | 
|  | unsigned long read = 0; | 
|  | int ret; | 
|  |  | 
|  | DBG("usb_read %d\n", len); | 
|  | if (NULL != handle) { | 
|  | while (1) { | 
|  | int xfer = (len > 4096) ? 4096 : len; | 
|  |  | 
|  | ret = AdbReadEndpointSync(handle->adb_read_pipe, | 
|  | (void*)data, | 
|  | (unsigned long)xfer, | 
|  | &read, | 
|  | time_out); | 
|  | errno = GetLastError(); | 
|  | DBG("usb_read got: %ld, expected: %d, errno: %d\n", read, xfer, errno); | 
|  | if (ret) { | 
|  | return read; | 
|  | } else if (errno != ERROR_SEM_TIMEOUT) { | 
|  | // assume ERROR_INVALID_HANDLE indicates we are disconnected | 
|  | if (errno == ERROR_INVALID_HANDLE) | 
|  | usb_kick(handle); | 
|  | break; | 
|  | } | 
|  | // else we timed out - try again | 
|  | } | 
|  | } else { | 
|  | DBG("usb_read NULL handle\n"); | 
|  | SetLastError(ERROR_INVALID_HANDLE); | 
|  | } | 
|  |  | 
|  | DBG("usb_read failed: %d\n", errno); | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | void usb_cleanup_handle(usb_handle* handle) { | 
|  | if (NULL != handle) { | 
|  | if (NULL != handle->interface_name) | 
|  | free(handle->interface_name); | 
|  | if (NULL != handle->adb_write_pipe) | 
|  | AdbCloseHandle(handle->adb_write_pipe); | 
|  | if (NULL != handle->adb_read_pipe) | 
|  | AdbCloseHandle(handle->adb_read_pipe); | 
|  | if (NULL != handle->adb_interface) | 
|  | AdbCloseHandle(handle->adb_interface); | 
|  |  | 
|  | handle->interface_name = NULL; | 
|  | handle->adb_write_pipe = NULL; | 
|  | handle->adb_read_pipe = NULL; | 
|  | handle->adb_interface = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | void usb_kick(usb_handle* handle) { | 
|  | if (NULL != handle) { | 
|  | usb_cleanup_handle(handle); | 
|  | } else { | 
|  | SetLastError(ERROR_INVALID_HANDLE); | 
|  | errno = ERROR_INVALID_HANDLE; | 
|  | } | 
|  | } | 
|  |  | 
|  | int usb_close(usb_handle* handle) { | 
|  | DBG("usb_close\n"); | 
|  |  | 
|  | if (NULL != handle) { | 
|  | // Cleanup handle | 
|  | usb_cleanup_handle(handle); | 
|  | free(handle); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int recognized_device(usb_handle* handle, ifc_match_func callback) { | 
|  | struct usb_ifc_info info; | 
|  | USB_DEVICE_DESCRIPTOR device_desc; | 
|  | USB_INTERFACE_DESCRIPTOR interf_desc; | 
|  |  | 
|  | if (NULL == handle) | 
|  | return 0; | 
|  |  | 
|  | // Check vendor and product id first | 
|  | if (!AdbGetUsbDeviceDescriptor(handle->adb_interface, | 
|  | &device_desc)) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | // Then check interface properties | 
|  | if (!AdbGetUsbInterfaceDescriptor(handle->adb_interface, | 
|  | &interf_desc)) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | // Must have two endpoints | 
|  | if (2 != interf_desc.bNumEndpoints) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | info.dev_vendor = device_desc.idVendor; | 
|  | info.dev_product = device_desc.idProduct; | 
|  | info.dev_class = device_desc.bDeviceClass; | 
|  | info.dev_subclass = device_desc.bDeviceSubClass; | 
|  | info.dev_protocol = device_desc.bDeviceProtocol; | 
|  | info.ifc_class = interf_desc.bInterfaceClass; | 
|  | info.ifc_subclass = interf_desc.bInterfaceSubClass; | 
|  | info.ifc_protocol = interf_desc.bInterfaceProtocol; | 
|  | info.writable = 1; | 
|  |  | 
|  | // read serial number (if there is one) | 
|  | unsigned long serial_number_len = sizeof(info.serial_number); | 
|  | if (!AdbGetSerialNumber(handle->adb_interface, info.serial_number, | 
|  | &serial_number_len, true)) { | 
|  | info.serial_number[0] = 0; | 
|  | } | 
|  |  | 
|  | if (callback(&info) == 0) { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static usb_handle *find_usb_device(ifc_match_func callback) { | 
|  | usb_handle* handle = NULL; | 
|  | char entry_buffer[2048]; | 
|  | char interf_name[2048]; | 
|  | AdbInterfaceInfo* next_interface = (AdbInterfaceInfo*)(&entry_buffer[0]); | 
|  | unsigned long entry_buffer_size = sizeof(entry_buffer); | 
|  | char* copy_name; | 
|  |  | 
|  | // Enumerate all present and active interfaces. | 
|  | ADBAPIHANDLE enum_handle = | 
|  | AdbEnumInterfaces(usb_class_id, true, true, true); | 
|  |  | 
|  | if (NULL == enum_handle) | 
|  | return NULL; | 
|  |  | 
|  | while (AdbNextInterface(enum_handle, next_interface, &entry_buffer_size)) { | 
|  | // TODO(vchtchetkine): FIXME - temp hack converting wchar_t into char. | 
|  | // It would be better to change AdbNextInterface so it will return | 
|  | // interface name as single char string. | 
|  | const wchar_t* wchar_name = next_interface->device_name; | 
|  | for(copy_name = interf_name; | 
|  | L'\0' != *wchar_name; | 
|  | wchar_name++, copy_name++) { | 
|  | *copy_name = (char)(*wchar_name); | 
|  | } | 
|  | *copy_name = '\0'; | 
|  |  | 
|  | handle = do_usb_open(next_interface->device_name); | 
|  | if (NULL != handle) { | 
|  | // Lets see if this interface (device) belongs to us | 
|  | if (recognized_device(handle, callback)) { | 
|  | // found it! | 
|  | break; | 
|  | } else { | 
|  | usb_cleanup_handle(handle); | 
|  | free(handle); | 
|  | handle = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | entry_buffer_size = sizeof(entry_buffer); | 
|  | } | 
|  |  | 
|  | AdbCloseHandle(enum_handle); | 
|  | return handle; | 
|  | } | 
|  |  | 
|  | usb_handle *usb_open(ifc_match_func callback) | 
|  | { | 
|  | return find_usb_device(callback); | 
|  | } | 
|  |  | 
|  | // called from fastboot.c | 
|  | void sleep(int seconds) | 
|  | { | 
|  | Sleep(seconds * 1000); | 
|  | } |