pvmfw/src/fdt.rs

// Copyright 2022, The Android Open Source Project
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

//! High-level FDT functions.

use crate::cstr;
use crate::helpers::flatten;
use crate::helpers::GUEST_PAGE_SIZE;
use crate::helpers::SIZE_4KB;
use crate::memory::BASE_ADDR;
use crate::memory::MAX_ADDR;
use crate::RebootReason;
use alloc::ffi::CString;
use alloc::vec::Vec;
use core::cmp::max;
use core::cmp::min;
use core::ffi::CStr;
use core::mem::size_of;
use core::ops::Range;
use fdtpci::PciMemoryFlags;
use fdtpci::PciRangeType;
use libfdt::AddressRange;
use libfdt::CellIterator;
use libfdt::Fdt;
use libfdt::FdtError;
use libfdt::FdtNode;
use log::debug;
use log::error;
use log::info;
use tinyvec::ArrayVec;

/// Extract from /config the address range containing the pre-loaded kernel. Absence of /config is
/// not an error.
fn read_kernel_range_from(fdt: &Fdt) -> libfdt::Result<Option<Range<usize>>> {
    let addr = cstr!("kernel-address");
    let size = cstr!("kernel-size");

    if let Some(config) = fdt.node(cstr!("/config"))? {
        if let (Some(addr), Some(size)) = (config.getprop_u32(addr)?, config.getprop_u32(size)?) {
            let addr = addr as usize;
            let size = size as usize;

            return Ok(Some(addr..(addr + size)));
        }
    }

    Ok(None)
}

/// Extract from /chosen the address range containing the pre-loaded ramdisk. Absence is not an
/// error as there can be initrd-less VM.
fn read_initrd_range_from(fdt: &Fdt) -> libfdt::Result<Option<Range<usize>>> {
    let start = cstr!("linux,initrd-start");
    let end = cstr!("linux,initrd-end");

    if let Some(chosen) = fdt.chosen()? {
        if let (Some(start), Some(end)) = (chosen.getprop_u32(start)?, chosen.getprop_u32(end)?) {
            return Ok(Some((start as usize)..(end as usize)));
        }
    }

    Ok(None)
}

fn patch_initrd_range(fdt: &mut Fdt, initrd_range: &Range<usize>) -> libfdt::Result<()> {
    let start = u32::try_from(initrd_range.start).unwrap();
    let end = u32::try_from(initrd_range.end).unwrap();

    let mut node = fdt.chosen_mut()?.ok_or(FdtError::NotFound)?;
    node.setprop(cstr!("linux,initrd-start"), &start.to_be_bytes())?;
    node.setprop(cstr!("linux,initrd-end"), &end.to_be_bytes())?;
    Ok(())
}

fn read_bootargs_from(fdt: &Fdt) -> libfdt::Result<Option<CString>> {
    if let Some(chosen) = fdt.chosen()? {
        if let Some(bootargs) = chosen.getprop_str(cstr!("bootargs"))? {
            // We need to copy the string to heap because the original fdt will be invalidated
            // by the templated DT
            let copy = CString::new(bootargs.to_bytes()).map_err(|_| FdtError::BadValue)?;
            return Ok(Some(copy));
        }
    }
    Ok(None)
}

fn patch_bootargs(fdt: &mut Fdt, bootargs: &CStr) -> libfdt::Result<()> {
    let mut node = fdt.chosen_mut()?.ok_or(FdtError::NotFound)?;
    // TODO(b/275306568) filter out dangerous options
    node.setprop(cstr!("bootargs"), bootargs.to_bytes_with_nul())
}

/// Read the first range in /memory node in DT
fn read_memory_range_from(fdt: &Fdt) -> libfdt::Result<Range<usize>> {
    fdt.memory()?.ok_or(FdtError::NotFound)?.next().ok_or(FdtError::NotFound)
}

/// Check if memory range is ok
fn validate_memory_range(range: &Range<usize>) -> Result<(), RebootReason> {
    let base = range.start;
    if base != BASE_ADDR {
        error!("Memory base address {:#x} is not {:#x}", base, BASE_ADDR);
        return Err(RebootReason::InvalidFdt);
    }

    let size = range.len();
    if size % GUEST_PAGE_SIZE != 0 {
        error!("Memory size {:#x} is not a multiple of page size {:#x}", size, GUEST_PAGE_SIZE);
        return Err(RebootReason::InvalidFdt);
    }

    if size == 0 {
        error!("Memory size is 0");
        return Err(RebootReason::InvalidFdt);
    }
    Ok(())
}

fn patch_memory_range(fdt: &mut Fdt, memory_range: &Range<usize>) -> libfdt::Result<()> {
    let size = memory_range.len() as u64;
    fdt.node_mut(cstr!("/memory"))?
        .ok_or(FdtError::NotFound)?
        .setprop_inplace(cstr!("reg"), flatten(&[BASE_ADDR.to_be_bytes(), size.to_be_bytes()]))
}

/// Read the number of CPUs from DT
fn read_num_cpus_from(fdt: &Fdt) -> libfdt::Result<usize> {
    Ok(fdt.compatible_nodes(cstr!("arm,arm-v8"))?.count())
}

/// Validate number of CPUs
fn validate_num_cpus(num_cpus: usize) -> Result<(), RebootReason> {
    if num_cpus == 0 {
        error!("Number of CPU can't be 0");
        return Err(RebootReason::InvalidFdt);
    }
    if DeviceTreeInfo::GIC_REDIST_SIZE_PER_CPU.checked_mul(num_cpus.try_into().unwrap()).is_none() {
        error!("Too many CPUs for gic: {}", num_cpus);
        return Err(RebootReason::InvalidFdt);
    }
    Ok(())
}

/// Patch DT by keeping `num_cpus` number of arm,arm-v8 compatible nodes, and pruning the rest.
fn patch_num_cpus(fdt: &mut Fdt, num_cpus: usize) -> libfdt::Result<()> {
    let cpu = cstr!("arm,arm-v8");
    let mut next = fdt.root_mut()?.next_compatible(cpu)?;
    for _ in 0..num_cpus {
        next = if let Some(current) = next {
            current.next_compatible(cpu)?
        } else {
            return Err(FdtError::NoSpace);
        };
    }
    while let Some(current) = next {
        next = current.delete_and_next_compatible(cpu)?;
    }
    Ok(())
}

#[derive(Debug)]
struct PciInfo {
    ranges: [PciAddrRange; 2],
    irq_masks: ArrayVec<[PciIrqMask; PciInfo::MAX_IRQS]>,
    irq_maps: ArrayVec<[PciIrqMap; PciInfo::MAX_IRQS]>,
}

impl PciInfo {
    const IRQ_MASK_CELLS: usize = 4;
    const IRQ_MAP_CELLS: usize = 10;
    const MAX_IRQS: usize = 8;
}

type PciAddrRange = AddressRange<(u32, u64), u64, u64>;
type PciIrqMask = [u32; PciInfo::IRQ_MASK_CELLS];
type PciIrqMap = [u32; PciInfo::IRQ_MAP_CELLS];

/// Iterator that takes N cells as a chunk
struct CellChunkIterator<'a, const N: usize> {
    cells: CellIterator<'a>,
}

impl<'a, const N: usize> CellChunkIterator<'a, N> {
    fn new(cells: CellIterator<'a>) -> Self {
        Self { cells }
    }
}

impl<'a, const N: usize> Iterator for CellChunkIterator<'a, N> {
    type Item = [u32; N];
    fn next(&mut self) -> Option<Self::Item> {
        let mut ret: Self::Item = [0; N];
        for i in ret.iter_mut() {
            *i = self.cells.next()?;
        }
        Some(ret)
    }
}

/// Read pci host controller ranges, irq maps, and irq map masks from DT
fn read_pci_info_from(fdt: &Fdt) -> libfdt::Result<PciInfo> {
    let node =
        fdt.compatible_nodes(cstr!("pci-host-cam-generic"))?.next().ok_or(FdtError::NotFound)?;

    let mut ranges = node.ranges::<(u32, u64), u64, u64>()?.ok_or(FdtError::NotFound)?;
    let range0 = ranges.next().ok_or(FdtError::NotFound)?;
    let range1 = ranges.next().ok_or(FdtError::NotFound)?;

    let irq_masks = node.getprop_cells(cstr!("interrupt-map-mask"))?.ok_or(FdtError::NotFound)?;
    let irq_masks = CellChunkIterator::<{ PciInfo::IRQ_MASK_CELLS }>::new(irq_masks);
    let irq_masks: ArrayVec<[PciIrqMask; PciInfo::MAX_IRQS]> =
        irq_masks.take(PciInfo::MAX_IRQS).collect();

    let irq_maps = node.getprop_cells(cstr!("interrupt-map"))?.ok_or(FdtError::NotFound)?;
    let irq_maps = CellChunkIterator::<{ PciInfo::IRQ_MAP_CELLS }>::new(irq_maps);
    let irq_maps: ArrayVec<[PciIrqMap; PciInfo::MAX_IRQS]> =
        irq_maps.take(PciInfo::MAX_IRQS).collect();

    Ok(PciInfo { ranges: [range0, range1], irq_masks, irq_maps })
}

fn validate_pci_info(pci_info: &PciInfo, memory_range: &Range<usize>) -> Result<(), RebootReason> {
    for range in pci_info.ranges.iter() {
        validate_pci_addr_range(range, memory_range)?;
    }
    for irq_mask in pci_info.irq_masks.iter() {
        validate_pci_irq_mask(irq_mask)?;
    }
    for (idx, irq_map) in pci_info.irq_maps.iter().enumerate() {
        validate_pci_irq_map(irq_map, idx)?;
    }
    Ok(())
}

fn validate_pci_addr_range(
    range: &PciAddrRange,
    memory_range: &Range<usize>,
) -> Result<(), RebootReason> {
    let mem_flags = PciMemoryFlags(range.addr.0);
    let range_type = mem_flags.range_type();
    let prefetchable = mem_flags.prefetchable();
    let bus_addr = range.addr.1;
    let cpu_addr = range.parent_addr;
    let size = range.size;

    if range_type != PciRangeType::Memory64 {
        error!("Invalid range type {:?} for bus address {:#x} in PCI node", range_type, bus_addr);
        return Err(RebootReason::InvalidFdt);
    }
    if prefetchable {
        error!("PCI bus address {:#x} in PCI node is prefetchable", bus_addr);
        return Err(RebootReason::InvalidFdt);
    }
    // Enforce ID bus-to-cpu mappings, as used by crosvm.
    if bus_addr != cpu_addr {
        error!("PCI bus address: {:#x} is different from CPU address: {:#x}", bus_addr, cpu_addr);
        return Err(RebootReason::InvalidFdt);
    }

    let Some(bus_end) = bus_addr.checked_add(size) else {
        error!("PCI address range size {:#x} overflows", size);
        return Err(RebootReason::InvalidFdt);
    };
    if bus_end > MAX_ADDR.try_into().unwrap() {
        error!("PCI address end {:#x} is outside of translatable range", bus_end);
        return Err(RebootReason::InvalidFdt);
    }

    let memory_start = memory_range.start.try_into().unwrap();
    let memory_end = memory_range.end.try_into().unwrap();

    if max(bus_addr, memory_start) < min(bus_end, memory_end) {
        error!(
            "PCI address range {:#x}-{:#x} overlaps with main memory range {:#x}-{:#x}",
            bus_addr, bus_end, memory_start, memory_end
        );
        return Err(RebootReason::InvalidFdt);
    }

    Ok(())
}

fn validate_pci_irq_mask(irq_mask: &PciIrqMask) -> Result<(), RebootReason> {
    const IRQ_MASK_ADDR_HI: u32 = 0xf800;
    const IRQ_MASK_ADDR_ME: u32 = 0x0;
    const IRQ_MASK_ADDR_LO: u32 = 0x0;
    const IRQ_MASK_ANY_IRQ: u32 = 0x7;
    const EXPECTED: PciIrqMask =
        [IRQ_MASK_ADDR_HI, IRQ_MASK_ADDR_ME, IRQ_MASK_ADDR_LO, IRQ_MASK_ANY_IRQ];
    if *irq_mask != EXPECTED {
        error!("Invalid PCI irq mask {:#?}", irq_mask);
        return Err(RebootReason::InvalidFdt);
    }
    Ok(())
}

fn validate_pci_irq_map(irq_map: &PciIrqMap, idx: usize) -> Result<(), RebootReason> {
    const PCI_DEVICE_IDX: usize = 11;
    const PCI_IRQ_ADDR_ME: u32 = 0;
    const PCI_IRQ_ADDR_LO: u32 = 0;
    const PCI_IRQ_INTC: u32 = 1;
    const AARCH64_IRQ_BASE: u32 = 4; // from external/crosvm/aarch64/src/lib.rs
    const GIC_SPI: u32 = 0;
    const IRQ_TYPE_LEVEL_HIGH: u32 = 4;

    let pci_addr = (irq_map[0], irq_map[1], irq_map[2]);
    let pci_irq_number = irq_map[3];
    let _controller_phandle = irq_map[4]; // skipped.
    let gic_addr = (irq_map[5], irq_map[6]); // address-cells is <2> for GIC
                                             // interrupt-cells is <3> for GIC
    let gic_peripheral_interrupt_type = irq_map[7];
    let gic_irq_number = irq_map[8];
    let gic_irq_type = irq_map[9];

    let phys_hi: u32 = (0x1 << PCI_DEVICE_IDX) * (idx + 1) as u32;
    let expected_pci_addr = (phys_hi, PCI_IRQ_ADDR_ME, PCI_IRQ_ADDR_LO);

    if pci_addr != expected_pci_addr {
        error!("PCI device address {:#x} {:#x} {:#x} in interrupt-map is different from expected address \
               {:#x} {:#x} {:#x}",
               pci_addr.0, pci_addr.1, pci_addr.2, expected_pci_addr.0, expected_pci_addr.1, expected_pci_addr.2);
        return Err(RebootReason::InvalidFdt);
    }

    if pci_irq_number != PCI_IRQ_INTC {
        error!(
            "PCI INT# {:#x} in interrupt-map is different from expected value {:#x}",
            pci_irq_number, PCI_IRQ_INTC
        );
        return Err(RebootReason::InvalidFdt);
    }

    if gic_addr != (0, 0) {
        error!(
            "GIC address {:#x} {:#x} in interrupt-map is different from expected address \
               {:#x} {:#x}",
            gic_addr.0, gic_addr.1, 0, 0
        );
        return Err(RebootReason::InvalidFdt);
    }

    if gic_peripheral_interrupt_type != GIC_SPI {
        error!("GIC peripheral interrupt type {:#x} in interrupt-map is different from expected value \
               {:#x}", gic_peripheral_interrupt_type, GIC_SPI);
        return Err(RebootReason::InvalidFdt);
    }

    let irq_nr: u32 = AARCH64_IRQ_BASE + (idx as u32);
    if gic_irq_number != irq_nr {
        error!(
            "GIC irq number {:#x} in interrupt-map is unexpected. Expected {:#x}",
            gic_irq_number, irq_nr
        );
        return Err(RebootReason::InvalidFdt);
    }

    if gic_irq_type != IRQ_TYPE_LEVEL_HIGH {
        error!(
            "IRQ type in {:#x} is invalid. Must be LEVEL_HIGH {:#x}",
            gic_irq_type, IRQ_TYPE_LEVEL_HIGH
        );
        return Err(RebootReason::InvalidFdt);
    }
    Ok(())
}

fn patch_pci_info(fdt: &mut Fdt, pci_info: &PciInfo) -> libfdt::Result<()> {
    let mut node = fdt
        .root_mut()?
        .next_compatible(cstr!("pci-host-cam-generic"))?
        .ok_or(FdtError::NotFound)?;

    let irq_masks_size = pci_info.irq_masks.len() * size_of::<PciIrqMask>();
    node.trimprop(cstr!("interrupt-map-mask"), irq_masks_size)?;

    let irq_maps_size = pci_info.irq_maps.len() * size_of::<PciIrqMap>();
    node.trimprop(cstr!("interrupt-map"), irq_maps_size)?;

    node.setprop_inplace(
        cstr!("ranges"),
        flatten(&[pci_info.ranges[0].to_cells(), pci_info.ranges[1].to_cells()]),
    )
}

#[derive(Default, Debug)]
struct SerialInfo {
    addrs: ArrayVec<[u64; Self::MAX_SERIALS]>,
}

impl SerialInfo {
    const MAX_SERIALS: usize = 4;
}

fn read_serial_info_from(fdt: &Fdt) -> libfdt::Result<SerialInfo> {
    let mut addrs: ArrayVec<[u64; SerialInfo::MAX_SERIALS]> = Default::default();
    for node in fdt.compatible_nodes(cstr!("ns16550a"))?.take(SerialInfo::MAX_SERIALS) {
        let reg = node.reg()?.ok_or(FdtError::NotFound)?.next().ok_or(FdtError::NotFound)?;
        addrs.push(reg.addr);
    }
    Ok(SerialInfo { addrs })
}

/// Patch the DT by deleting the ns16550a compatible nodes whose address are unknown
fn patch_serial_info(fdt: &mut Fdt, serial_info: &SerialInfo) -> libfdt::Result<()> {
    let name = cstr!("ns16550a");
    let mut next = fdt.root_mut()?.next_compatible(name);
    while let Some(current) = next? {
        let reg = FdtNode::from_mut(&current)
            .reg()?
            .ok_or(FdtError::NotFound)?
            .next()
            .ok_or(FdtError::NotFound)?;
        next = if !serial_info.addrs.contains(&reg.addr) {
            current.delete_and_next_compatible(name)
        } else {
            current.next_compatible(name)
        }
    }
    Ok(())
}

#[derive(Debug)]
struct SwiotlbInfo {
    size: u64,
    align: u64,
}

fn read_swiotlb_info_from(fdt: &Fdt) -> libfdt::Result<SwiotlbInfo> {
    let node =
        fdt.compatible_nodes(cstr!("restricted-dma-pool"))?.next().ok_or(FdtError::NotFound)?;
    let size = node.getprop_u64(cstr!("size"))?.ok_or(FdtError::NotFound)?;
    let align = node.getprop_u64(cstr!("alignment"))?.ok_or(FdtError::NotFound)?;
    Ok(SwiotlbInfo { size, align })
}

fn validate_swiotlb_info(swiotlb_info: &SwiotlbInfo) -> Result<(), RebootReason> {
    let size = swiotlb_info.size;
    let align = swiotlb_info.align;

    if size == 0 || (size % GUEST_PAGE_SIZE as u64) != 0 {
        error!("Invalid swiotlb size {:#x}", size);
        return Err(RebootReason::InvalidFdt);
    }

    if (align % GUEST_PAGE_SIZE as u64) != 0 {
        error!("Invalid swiotlb alignment {:#x}", align);
        return Err(RebootReason::InvalidFdt);
    }
    Ok(())
}

fn patch_swiotlb_info(fdt: &mut Fdt, swiotlb_info: &SwiotlbInfo) -> libfdt::Result<()> {
    let mut node =
        fdt.root_mut()?.next_compatible(cstr!("restricted-dma-pool"))?.ok_or(FdtError::NotFound)?;
    node.setprop_inplace(cstr!("size"), &swiotlb_info.size.to_be_bytes())?;
    node.setprop_inplace(cstr!("alignment"), &swiotlb_info.align.to_be_bytes())?;
    Ok(())
}

fn patch_gic(fdt: &mut Fdt, num_cpus: usize) -> libfdt::Result<()> {
    let node = fdt.compatible_nodes(cstr!("arm,gic-v3"))?.next().ok_or(FdtError::NotFound)?;
    let mut ranges = node.reg()?.ok_or(FdtError::NotFound)?;
    let range0 = ranges.next().ok_or(FdtError::NotFound)?;
    let mut range1 = ranges.next().ok_or(FdtError::NotFound)?;

    let addr = range0.addr;
    // SAFETY - doesn't overflow. checked in validate_num_cpus
    let size: u64 =
        DeviceTreeInfo::GIC_REDIST_SIZE_PER_CPU.checked_mul(num_cpus.try_into().unwrap()).unwrap();

    // range1 is just below range0
    range1.addr = addr - size;
    range1.size = Some(size);

    let range0 = range0.to_cells();
    let range1 = range1.to_cells();
    let value = [
        range0.0,          // addr
        range0.1.unwrap(), //size
        range1.0,          // addr
        range1.1.unwrap(), //size
    ];

    let mut node =
        fdt.root_mut()?.next_compatible(cstr!("arm,gic-v3"))?.ok_or(FdtError::NotFound)?;
    node.setprop_inplace(cstr!("reg"), flatten(&value))
}

fn patch_timer(fdt: &mut Fdt, num_cpus: usize) -> libfdt::Result<()> {
    const NUM_INTERRUPTS: usize = 4;
    const CELLS_PER_INTERRUPT: usize = 3;
    let node = fdt.compatible_nodes(cstr!("arm,armv8-timer"))?.next().ok_or(FdtError::NotFound)?;
    let interrupts = node.getprop_cells(cstr!("interrupts"))?.ok_or(FdtError::NotFound)?;
    let mut value: ArrayVec<[u32; NUM_INTERRUPTS * CELLS_PER_INTERRUPT]> =
        interrupts.take(NUM_INTERRUPTS * CELLS_PER_INTERRUPT).collect();

    let num_cpus: u32 = num_cpus.try_into().unwrap();
    let cpu_mask: u32 = (((0x1 << num_cpus) - 1) & 0xff) << 8;
    for v in value.iter_mut().skip(2).step_by(CELLS_PER_INTERRUPT) {
        *v |= cpu_mask;
    }
    for v in value.iter_mut() {
        *v = v.to_be();
    }

    // SAFETY - array size is the same
    let value = unsafe {
        core::mem::transmute::<
            [u32; NUM_INTERRUPTS * CELLS_PER_INTERRUPT],
            [u8; NUM_INTERRUPTS * CELLS_PER_INTERRUPT * size_of::<u32>()],
        >(value.into_inner())
    };

    let mut node =
        fdt.root_mut()?.next_compatible(cstr!("arm,armv8-timer"))?.ok_or(FdtError::NotFound)?;
    node.setprop_inplace(cstr!("interrupts"), value.as_slice())
}

#[derive(Debug)]
pub struct DeviceTreeInfo {
    pub kernel_range: Option<Range<usize>>,
    pub initrd_range: Option<Range<usize>>,
    pub memory_range: Range<usize>,
    bootargs: Option<CString>,
    num_cpus: usize,
    pci_info: PciInfo,
    serial_info: SerialInfo,
    swiotlb_info: SwiotlbInfo,
}

impl DeviceTreeInfo {
    const GIC_REDIST_SIZE_PER_CPU: u64 = (32 * SIZE_4KB) as u64;
}

pub fn sanitize_device_tree(fdt: &mut Fdt) -> Result<DeviceTreeInfo, RebootReason> {
    let info = parse_device_tree(fdt)?;
    debug!("Device tree info: {:?}", info);

    fdt.copy_from_slice(pvmfw_fdt_template::RAW).map_err(|e| {
        error!("Failed to instantiate FDT from the template DT: {e}");
        RebootReason::InvalidFdt
    })?;

    patch_device_tree(fdt, &info)?;
    Ok(info)
}

fn parse_device_tree(fdt: &libfdt::Fdt) -> Result<DeviceTreeInfo, RebootReason> {
    let kernel_range = read_kernel_range_from(fdt).map_err(|e| {
        error!("Failed to read kernel range from DT: {e}");
        RebootReason::InvalidFdt
    })?;

    let initrd_range = read_initrd_range_from(fdt).map_err(|e| {
        error!("Failed to read initrd range from DT: {e}");
        RebootReason::InvalidFdt
    })?;

    let memory_range = read_memory_range_from(fdt).map_err(|e| {
        error!("Failed to read memory range from DT: {e}");
        RebootReason::InvalidFdt
    })?;
    validate_memory_range(&memory_range)?;

    let bootargs = read_bootargs_from(fdt).map_err(|e| {
        error!("Failed to read bootargs from DT: {e}");
        RebootReason::InvalidFdt
    })?;

    let num_cpus = read_num_cpus_from(fdt).map_err(|e| {
        error!("Failed to read num cpus from DT: {e}");
        RebootReason::InvalidFdt
    })?;
    validate_num_cpus(num_cpus)?;

    let pci_info = read_pci_info_from(fdt).map_err(|e| {
        error!("Failed to read pci info from DT: {e}");
        RebootReason::InvalidFdt
    })?;
    validate_pci_info(&pci_info, &memory_range)?;

    let serial_info = read_serial_info_from(fdt).map_err(|e| {
        error!("Failed to read serial info from DT: {e}");
        RebootReason::InvalidFdt
    })?;

    let swiotlb_info = read_swiotlb_info_from(fdt).map_err(|e| {
        error!("Failed to read swiotlb info from DT: {e}");
        RebootReason::InvalidFdt
    })?;
    validate_swiotlb_info(&swiotlb_info)?;

    Ok(DeviceTreeInfo {
        kernel_range,
        initrd_range,
        memory_range,
        bootargs,
        num_cpus,
        pci_info,
        serial_info,
        swiotlb_info,
    })
}

fn patch_device_tree(fdt: &mut Fdt, info: &DeviceTreeInfo) -> Result<(), RebootReason> {
    fdt.unpack().map_err(|e| {
        error!("Failed to unpack DT for patching: {e}");
        RebootReason::InvalidFdt
    })?;

    if let Some(initrd_range) = &info.initrd_range {
        patch_initrd_range(fdt, initrd_range).map_err(|e| {
            error!("Failed to patch initrd range to DT: {e}");
            RebootReason::InvalidFdt
        })?;
    }
    patch_memory_range(fdt, &info.memory_range).map_err(|e| {
        error!("Failed to patch memory range to DT: {e}");
        RebootReason::InvalidFdt
    })?;
    if let Some(bootargs) = &info.bootargs {
        patch_bootargs(fdt, bootargs.as_c_str()).map_err(|e| {
            error!("Failed to patch bootargs to DT: {e}");
            RebootReason::InvalidFdt
        })?;
    }
    patch_num_cpus(fdt, info.num_cpus).map_err(|e| {
        error!("Failed to patch cpus to DT: {e}");
        RebootReason::InvalidFdt
    })?;
    patch_pci_info(fdt, &info.pci_info).map_err(|e| {
        error!("Failed to patch pci info to DT: {e}");
        RebootReason::InvalidFdt
    })?;
    patch_serial_info(fdt, &info.serial_info).map_err(|e| {
        error!("Failed to patch serial info to DT: {e}");
        RebootReason::InvalidFdt
    })?;
    patch_swiotlb_info(fdt, &info.swiotlb_info).map_err(|e| {
        error!("Failed to patch swiotlb info to DT: {e}");
        RebootReason::InvalidFdt
    })?;
    patch_gic(fdt, info.num_cpus).map_err(|e| {
        error!("Failed to patch gic info to DT: {e}");
        RebootReason::InvalidFdt
    })?;
    patch_timer(fdt, info.num_cpus).map_err(|e| {
        error!("Failed to patch timer info to DT: {e}");
        RebootReason::InvalidFdt
    })?;

    fdt.pack().map_err(|e| {
        error!("Failed to pack DT after patching: {e}");
        RebootReason::InvalidFdt
    })?;

    Ok(())
}

/// Modifies the input DT according to the fields of the configuration.
pub fn modify_for_next_stage(
    fdt: &mut Fdt,
    bcc: &[u8],
    new_instance: bool,
    strict_boot: bool,
    debug_policy: Option<&mut [u8]>,
) -> libfdt::Result<()> {
    fdt.unpack()?;

    patch_dice_node(fdt, bcc.as_ptr() as usize, bcc.len())?;

    set_or_clear_chosen_flag(fdt, cstr!("avf,strict-boot"), strict_boot)?;
    set_or_clear_chosen_flag(fdt, cstr!("avf,new-instance"), new_instance)?;

    if let Some(debug_policy) = debug_policy {
        apply_debug_policy(fdt, debug_policy)?;
        info!("Debug policy applied.");
    } else {
        info!("No debug policy found.");
    }

    fdt.pack()?;

    Ok(())
}

/// Patch the "google,open-dice"-compatible reserved-memory node to point to the bcc range
fn patch_dice_node(fdt: &mut Fdt, addr: usize, size: usize) -> libfdt::Result<()> {
    // We reject DTs with missing reserved-memory node as validation should have checked that the
    // "swiotlb" subnode (compatible = "restricted-dma-pool") was present.
    let node = fdt.node_mut(cstr!("/reserved-memory"))?.ok_or(libfdt::FdtError::NotFound)?;

    let mut node = node.next_compatible(cstr!("google,open-dice"))?.ok_or(FdtError::NotFound)?;

    let addr: u64 = addr.try_into().unwrap();
    let size: u64 = size.try_into().unwrap();
    node.setprop_inplace(cstr!("reg"), flatten(&[addr.to_be_bytes(), size.to_be_bytes()]))
}

fn set_or_clear_chosen_flag(fdt: &mut Fdt, flag: &CStr, value: bool) -> libfdt::Result<()> {
    // TODO(b/249054080): Refactor to not panic if the DT doesn't contain a /chosen node.
    let mut chosen = fdt.chosen_mut()?.unwrap();
    if value {
        chosen.setprop_empty(flag)?;
    } else {
        match chosen.delprop(flag) {
            Ok(()) | Err(FdtError::NotFound) => (),
            Err(e) => return Err(e),
        }
    }

    Ok(())
}

fn apply_debug_policy(fdt: &mut Fdt, debug_policy: &mut [u8]) -> libfdt::Result<()> {
    let backup_fdt = Vec::from(fdt.as_slice());

    let overlay = match Fdt::from_mut_slice(debug_policy) {
        Ok(overlay) => overlay,
        Err(e) => {
            info!("Corrupted debug policy found: {e}. Not applying.");
            return Ok(());
        }
    };
    let backup_overlay = Vec::from(overlay.as_slice());

    // SAFETY - on failure, the corrupted fdts are discarded and are restored using the backups.
    if let Err(e) = unsafe { fdt.apply_overlay(overlay) } {
        error!("Failed to apply debug policy: {e}. Recovering...");
        fdt.copy_from_slice(backup_fdt.as_slice())?;
        overlay.copy_from_slice(backup_overlay.as_slice())?;
        // A successful restoration is considered success because an invalid debug policy
        // shouldn't DOS the pvmfw
    }
    Ok(())
}