Merge changes Id08f5100,I10113c78,I06ea6fff,Ib57f3985,I6cc23c41, ... into main
* changes:
Update doc for data_enum props.
Update doc for SEAT_HEADREST_FORE_AFT
Update doc for SEAT_HEADREST_ANGLE
Update doc for SEAT_HEADREST_HEIGHT
Update doc for SEAT_LUMBAR
Update doc for SEAT_TILT
Update doc for SEAT_DEPTH
Update doc for SEAT_HEIGHT
Update doc for SEAT_BACKREST_ANGLE_MOVE
Update doc for SEAT_BACKREST_ANGLE_POS
Update doc for SEAT_FORE_AFT
Update doc for SEAT_BELT.
Update doc for SEAT_MEMORY.
Update doc for MIRROR_MOVE.
Update doc for MIRROR_POS.
Update doc for DOOR_MOVE.
Update doc for DOOR_POS.
Update doc for EV_BATTERY_DISPLAY_UNITS.
Update doc for TIRE_PRESSURE_DISPLAY_UNITS.
Update doc for FUEL_VOLUME_DISPLAY_UNITS.
diff --git a/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json b/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
index 845b39e..e0d450b 100644
--- a/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
+++ b/automotive/vehicle/aidl/emu_metadata/android.hardware.automotive.vehicle-types-meta.json
@@ -520,7 +520,7 @@
"VehicleUnit"
],
"data_enum": "VehicleUnit",
- "description": "Fuel volume units for display\nIndicates which units the car is using to display fuel volume to the user. Eg. Liter or Gallon.\nVehiclePropConfig.configArray is used to indicate the supported fuel volume display units. Volume units are defined in VehicleUnit. For example: configArray[0] = LITER configArray[1] = GALLON\nIf updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Fuel volume units for display\nIndicates which units the car is using to display fuel volume to the user. Eg. Liter or Gallon.\nVehiclePropConfig.configArray is used to indicate the supported fuel volume display units. Volume units are defined in VehicleUnit. For example: configArray[0] = LITER configArray[1] = GALLON\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [FUEL_VOLUME_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [LITER, GALLON]. At boot, the values in the config array are equal to the supported values list.\nIf updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "TIRE_PRESSURE_DISPLAY_UNITS",
@@ -529,7 +529,7 @@
"VehicleUnit"
],
"data_enum": "VehicleUnit",
- "description": "Tire pressure units for display\nIndicates which units the car is using to display tire pressure to the user. Eg. PSI, Bar or Kilopascal.\nVehiclePropConfig.configArray is used to indicate the supported pressure display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = KILOPASCAL configArray[1] = PSI configArray[2] = BAR\nIf updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Tire pressure units for display\nIndicates which units the car is using to display tire pressure to the user. Eg. PSI, Bar or Kilopascal.\nVehiclePropConfig.configArray is used to indicate the supported pressure display units. Pressure units are defined in VehicleUnit. For example: configArray[0] = KILOPASCAL configArray[1] = PSI configArray[2] = BAR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [TIRE_PRESSURE_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [KILOPASCAL, PSI, BAR]. At boot, the values in the config array are equal to the supported values list.\nIf updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "EV battery units for display",
@@ -538,7 +538,7 @@
"VehicleUnit"
],
"data_enum": "VehicleUnit",
- "description": "EV battery units for display\nIndicates which units the car is using to display EV battery information to the user. Eg. watt-hours(Wh), kilowatt-hours(kWh) or ampere-hours(Ah).\nVehiclePropConfig.configArray is used to indicate the supported electrical energy units. Electrical energy units are defined in VehicleUnit. For example: configArray[0] = WATT_HOUR configArray[1] = AMPERE_HOURS configArray[2] = KILOWATT_HOUR\nIf updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "EV battery units for display\nIndicates which units the car is using to display EV battery information to the user. Eg. watt-hours(Wh), kilowatt-hours(kWh) or ampere-hours(Ah).\nVehiclePropConfig.configArray is used to indicate the supported electrical energy units. Electrical energy units are defined in VehicleUnit. For example: configArray[0] = WATT_HOUR configArray[1] = AMPERE_HOURS configArray[2] = KILOWATT_HOUR\nIf {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0): {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID (0) must be {@code true}. {@code getSupportedValuesLists} for [EV_BATTERY_DISPLAY_UNITS, areaId=0] must return a {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList}, e.g. [WATT_HOUR, AMPERE_HOURS, KILOWATT_HOUR]. At boot, the values in the config array are equal to the supported values list.\nIf updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties, then their values must be updated and communicated to the AAOS framework as well.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "FUEL_CONSUMPTION_UNITS_DISTANCE_OVER_VOLUME",
@@ -645,12 +645,12 @@
{
"name": "Door position",
"value": 373295872,
- "description": "Door position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the door is closed. The minInt32Value must be 0. The maxInt32Value indicates the door is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nSome vehicles (minivans) can open the door electronically. Hence, the ability to write this property.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Door position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the door is closed. The minInt32Value must be 0.\nThe maxInt32Value indicates the door is fully open.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nSome vehicles (minivans) can open the door electronically. Hence, the ability to write this property.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Door move",
"value": 373295873,
- "description": "Door move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the door while opening. The minInt32Value represents the maximum movement speed of the door while closing.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the door reaches the positional limit, the value must reset to 0. If DOOR_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Door move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the door while closing.\nThe maxInt32Value represents the maximum movement speed of the door while opening.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the door reaches the positional limit, the value must reset to 0. If DOOR_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Door lock",
@@ -665,22 +665,22 @@
{
"name": "Mirror Z Position",
"value": 339741504,
- "description": "Mirror Z Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely downwards. This must be a non-positive value. The maxInt32Value indicates the mirror is tilted completely upwards. This must be a non-negative value. 0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the fully downward and fully upwards positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Mirror Z Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely downwards. This must be a non-positive value.\nThe maxInt32Value indicates the mirror is tilted completely upwards. This must be a non-negative value.\n0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the fully downward and fully upwards positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the fully downward and fully upwards positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Mirror Z Move",
"value": 339741505,
- "description": "Mirror Z Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting upwards. The minInt32Value represents the maximum movement speed of the mirror while tilting downwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Z_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Mirror Z Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the mirror while tilting downwards.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting upwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Z_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Mirror Y Position",
"value": 339741506,
- "description": "Mirror Y Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely to the left. This must be a non-positive value. The maxInt32Value indicates the mirror is tilted completely to the right. This must be a non-negative value. 0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the left extreme and right extreme positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Mirror Y Position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the mirror is tilted completely to the left. This must be a non-positive value.\nThe maxInt32Value indicates the mirror is tilted completely to the right. This must be a non-negative value.\n0 indicates the mirror is not tilted in either direction.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the left extreme and right extreme positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the fully downward and fully upwards positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Mirror Y Move",
"value": 339741507,
- "description": "Mirror Y Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting right. The minInt32Value represents the maximum movement speed of the mirror while tilting left.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Y_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Mirror Y Move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the mirror while tilting left.\nThe maxInt32Value represents the maximum movement speed of the mirror while tilting right.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Y_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Mirror Lock",
@@ -705,12 +705,12 @@
{
"name": "Seat memory select",
"value": 356518784,
- "description": "Seat memory select\nThis parameter selects the memory preset to use to select the seat position. The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported. The minInt32Value is always 0, and the maxInt32Value determines the number of seat preset memory slots available (i.e. numSeatPresets - 1).\nFor instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When the user wants to select a preset, the desired preset number (0, 1, or 2) is set."
+ "description": "Seat memory select\nThis parameter selects the memory preset to use to select the seat position.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nAll integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value is always 0, and the maxInt32Value determines the number of seat preset memory slots available (i.e. numSeatPresets - 1).\nFor instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When the user wants to select a preset, the desired preset number (0, 1, or 2) is set.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
},
{
"name": "Seat memory set",
"value": 356518785,
- "description": "Seat memory set\nThis setting allows the user to save the current seat position settings into the selected preset slot. The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The minInt32Value must be 0, and the maxInt32Value for each seat position must match the maxInt32Value for SEAT_MEMORY_SELECT."
+ "description": "Seat memory set\nThis setting allows the user to save the current seat position settings into the selected preset slot.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.\nThe minInt32Value must be 0, and the maxInt32Value for each seat position must match the maxInt32Value for SEAT_MEMORY_SELECT.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue."
},
{
"name": "Seatbelt buckled",
@@ -720,92 +720,92 @@
{
"name": "Seatbelt height position",
"value": 356518787,
- "description": "Seatbelt height position\nAdjusts the shoulder belt anchor point.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat belt's shoulder anchor is at its lowest position. The maxInt32Value indicates the seat belt's shoulder anchor is at its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seatbelt height position\nAdjusts the shoulder belt anchor point.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat belt's shoulder anchor is at its lowest position.\nThe maxInt32Value indicates the seat belt's shoulder anchor is at its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the lowest and highest positions. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seatbelt height move",
"value": 356518788,
- "description": "Seatbelt height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving upwards. The minInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving downwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat belt reaches the positional limit, the value must reset to 0. If SEAT_BELT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seatbelt height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving downwards.\nThe maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor while moving upwards.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat belt reaches the positional limit, the value must reset to 0. If SEAT_BELT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat fore\/aft position",
"value": 356518789,
- "description": "Seat fore\/aft position\nSets the seat position forward and backwards.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is at its rearward-most linear position. The maxInt32Value indicates the seat is at its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and farthest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat fore\/aft position\nSets the seat position forward and backwards.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is at its rearward-most linear position.\nThe maxInt32Value indicates the seat is at its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the closest and farthest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat fore\/aft move",
"value": 356518790,
- "description": "Seat fore\/aft move\nThis property moves the entire seat forward\/backward in the direction that it is facing.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat while moving forward. The minInt32Value represents the maximum movement speed of the seat while moving backward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat fore\/aft move\nThis property moves the entire seat forward\/backward in the direction that it is facing.\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat backrest angle 1 position",
"value": 356518791,
- "description": "Seat backrest angle 1 position\nBackrest angle 1 is the actuator closest to the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the actuator at the bottom of the seat. The maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the actuator at the bottom of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat backrest angle 1 position\nBackrest angle 1 is the actuator closest to the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the actuator at the bottom of the seat.\nThe maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the actuator at the bottom of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the full recline and upright\/forward positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat backrest angle 1 move",
"value": 356518792,
- "description": "Seat backrest angle 1 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward. The minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_1_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat backrest angle 1 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_1_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat backrest angle 2 position",
"value": 356518793,
- "description": "Seat backrest angle 2 position\nBackrest angle 2 is the next actuator up from the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the next actuator in the backrest from the one at the bottom of the seat (see SEAT_BACKREST_ANGLE_1_POS for additional details). The maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the next actuator in the backrest from the one at the bottom of the seat(see SEAT_BACKREST_ANGLE_1_POS for additional details).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat backrest angle 2 position\nBackrest angle 2 is the next actuator up from the bottom of the seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat backrest's full recline position w.r.t the next actuator in the backrest from the one at the bottom of the seat (see SEAT_BACKREST_ANGLE_1_POS for additional details).\nThe maxInt32Value indicates the seat backrest's most upright\/forward position w.r.t the next actuator in the backrest from the one at the bottom of the seat(see SEAT_BACKREST_ANGLE_1_POS for additional details).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} ihas the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. Values in between minSupportedValue and maxSupportedValue indicate a transition state between the full recline and upright\/forward positions. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat backrest angle 2 move",
"value": 356518794,
- "description": "Seat backrest angle 2 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward. The minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_2_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat backrest angle 2 move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat backrest while reclining.\nThe maxInt32Value represents the maximum movement speed of the seat backrest while angling forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_BACKREST_ANGLE_2_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat height position",
"value": 356518795,
- "description": "Seat height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its lowest position. The maxInt32Value indicates the seat is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat height position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its lowest position.\nThe maxInt32Value indicates the seat is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. position. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat height move",
"value": 356518796,
- "description": "Seat height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat while moving upward. The minInt32Value represents the maximum movement speed of the seat while moving downward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while moving downward.\nThe maxInt32Value represents the maximum movement speed of the seat while moving upward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat reaches the positional limit, the value must reset to 0. If SEAT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat depth position",
"value": 356518797,
- "description": "Seat depth position\nSets the seat depth, distance from back rest to front edge of seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its shallowest position (i.e. the position with the smallest distance between the front edge of the seat cushion and the rear end of the seat). The maxInt32Value indicates the seat is in its deepest position (i.e. the position with the largest distance between the front edge of the seat cushion and the rear end of the seat).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the shallowest and deepest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat depth position\nSets the seat depth, distance from back rest to front edge of seat.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat is in its shallowest position (i.e. the position with the smallest distance between the front edge of the seat cushion and the rear end of the seat).\nThe maxInt32Value indicates the seat is in its deepest position (i.e. the position with the largest distance between the front edge of the seat cushion and the rear end of the seat).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the shallowest and deepest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat depth move",
"value": 356518798,
- "description": "Seat depth move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat while getting deeper The minInt32Value represents the maximum movement speed of the seat while getting shallower.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat depth move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat while getting shallower.\nThe maxInt32Value represents the maximum movement speed of the seat while getting deeper.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat backrest reaches the positional limit, the value must reset to 0. If SEAT_DEPTH_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat tilt position",
"value": 356518799,
- "description": "Seat tilt position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat bottom is angled at its lowest angular position. This corresponds to the seat's front edge at its lowest possible position relative to the rear end of the seat. The maxInt32Value indicates the seat bottom is angled at its highest angular position. This corresponds to the seat's front edge at its highest possible position relative to the rear end of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat tilt position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the seat bottom is angled at its lowest angular position. This corresponds to the seat's front edge at its lowest possible position relative to the rear end of the seat.\nThe maxInt32Value indicates the seat bottom is angled at its highest angular position. This corresponds to the seat's front edge at its highest possible position relative to the rear end of the seat.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Seat tilt move",
"value": 356518800,
- "description": "Seat tilt move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the front edge of the seat while moving upward. The minInt32Value represents the maximum movement speed of the front edge of the seat while moving downward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat bottom reaches the positional limit, the value must reset to 0. If SEAT_TILT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Seat tilt move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the front edge of the seat while moving downward.\nThe maxInt32Value represents the maximum movement speed of the front edge of the seat while moving upward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat bottom reaches the positional limit, the value must reset to 0. If SEAT_TILT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Lumber fore\/aft position",
"value": 356518801,
- "description": "Lumber fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is in its rearward most position (i.e. least supportive position). The maxInt32Value indicates the lumbar support is in its forward most position (i.e. most supportive position).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Lumber fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar support is in its rearward most position (i.e. least supportive position).\nThe maxInt32Value indicates the lumbar support is in its forward most position (i.e. most supportive position).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Lumbar fore\/aft move",
"value": 356518802,
- "description": "Lumbar fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar support while moving forward. The minInt32Value represents the maximum movement speed of the seat's lumbar support while moving backward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Lumbar fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's lumbar support while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar support while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Lumbar side support position",
"value": 356518803,
- "description": "Lumbar side support position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar side support is in its thinnest position (i.e. most support). The maxInt32Value indicates the lumbar side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Lumbar side support position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the lumbar side support is in its thinnest position (i.e. most support).\nThe maxInt32Value indicates the lumbar side support is in its widest position (i.e. least support).\nValues in between minInt32Value and maxInt32Value indicate a transition state between the thinnest and widest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Lumbar side support move",
"value": 356518804,
- "description": "Lumbar side support move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar side support while getting wider. The minInt32Value represents the maximum movement speed of the seat's lumbar side support while getting thinner.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Lumbar side support move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's lumbar side support while getting thinner.\nThe maxInt32Value represents the maximum movement speed of the seat's lumbar side support while getting wider.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's lumbar side support reaches the positional limit, the value must reset to 0. If SEAT_LUMBAR_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "SEAT_HEADREST_HEIGHT_POS",
@@ -815,32 +815,32 @@
{
"name": "Headrest height position",
"value": 356518820,
- "description": "Headrest height position\nSets the headrest height for supported seats. VehiclePropConfig.areaConfigs specifies which seats are supported.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its lowest position. The maxInt32Value indicates the headrest is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Headrest height position\nSets the headrest height for supported seats. VehiclePropConfig.areaConfigs specifies which seats are supported.\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its lowest position.\nThe maxInt32Value indicates the headrest is in its highest position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the lowest and highest positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Headrest height move",
"value": 356518806,
- "description": "Headrest height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving up. The minInt32Value represents the maximum movement speed of the seat's headrest while moving down.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Headrest height move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving down.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving up.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Headrest angle position",
"value": 356518807,
- "description": "Headrest angle position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its full recline position. The maxInt32Value indicates the headrest is in its most upright\/forward position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and most upright\/forward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Headrest angle position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its full recline position.\nThe maxInt32Value indicates the headrest is in its most upright\/forward position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the full recline and most upright\/forward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Headrest angle move",
"value": 356518808,
- "description": "Headrest angle move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving into an upright\/forward position. The minInt32Value represents the maximum movement speed of the seat's headrest while moving into a shallow position.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_ANGLE_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Headrest angle move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving into a shallow position.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving into an upright\/forward position.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_ANGLE_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Headrest fore\/aft position",
"value": 356518809,
- "description": "Headrest fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its rearward-most linear position. The maxInt32Value indicates the headrest is in its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Headrest fore\/aft position\nThe maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value indicates the headrest is in its rearward-most linear position.\nThe maxInt32Value indicates the headrest is in its forward-most linear position.\nValues in between minInt32Value and maxInt32Value indicate a transition state between the forward and rearward positions.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative positions.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "Headrest fore\/aft move",
"value": 356518810,
- "description": "Headrest fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving forward. The minInt32Value represents the maximum movement speed of the seat's headrest while moving backward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Headrest fore\/aft move\nThe maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.\nThe minInt32Value represents the maximum movement speed of the seat's headrest while moving backward.\nThe maxInt32Value represents the maximum movement speed of the seat's headrest while moving forward.\nLarger absolute values, either positive or negative, indicate a faster movement speed. Once the seat's headrest reaches the positional limit, the value must reset to 0. If SEAT_HEADREST_FORE_AFT_MOVE's value is currently 0, then that means there is no movement currently occurring.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasMinSupportedValue} and {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID. {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value. {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value. All integers between minSupportedValue and maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to maxSupportedValue.\nThis property is not in any particular unit but in a specified range of relative movement speeds.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "SEAT_FOOTWELL_LIGHTS_STATE",
@@ -849,7 +849,7 @@
"VehicleLightState"
],
"data_enum": "VehicleLightState",
- "description": "Represents property for the seat footwell lights state.\nSEAT_FOOTWELL_LIGHTS_STATE reflects the current state of the lights at any point in time. This is different from the function of SEAT_FOOTWELL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, SEAT_FOOTWELL_LIGHTS_STATE may not match the value of SEAT_FOOTWELL_LIGHTS_SWITCH (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported."
+ "description": "Represents property for the seat footwell lights state.\nSEAT_FOOTWELL_LIGHTS_STATE reflects the current state of the lights at any point in time. This is different from the function of SEAT_FOOTWELL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, SEAT_FOOTWELL_LIGHTS_STATE may not match the value of SEAT_FOOTWELL_LIGHTS_SWITCH (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all enum values of VehicleLightState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "SEAT_FOOTWELL_LIGHTS_SWITCH",
@@ -858,7 +858,7 @@
"VehicleLightSwitch"
],
"data_enum": "VehicleLightSwitch",
- "description": "Represents property for the seat footwell lights switch.\nSEAT_FOOTWELL_LIGHTS_SWITCH represents the position of the switch controlling the lights. This is different from the function of SEAT_FOOTWELL_LIGHTS_STATE which reflects the current state of the lights at any point in time. Therefore, SEAT_FOOTWELL_LIGHTS_SWITCH may not match the value of SEAT_FOOTWELL_LIGHTS_STATE (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Represents property for the seat footwell lights switch.\nSEAT_FOOTWELL_LIGHTS_SWITCH represents the position of the switch controlling the lights. This is different from the function of SEAT_FOOTWELL_LIGHTS_STATE which reflects the current state of the lights at any point in time. Therefore, SEAT_FOOTWELL_LIGHTS_SWITCH may not match the value of SEAT_FOOTWELL_LIGHTS_STATE (e.g. SEAT_FOOTWELL_LIGHTS_SWITCH=AUTOMATIC and SEAT_FOOTWELL_LIGHTS_STATE=ON).\nThis property should only be implemented if SEAT_FOOTWELL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all enum values of VehicleLightSwitch are supported. At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "SEAT_EASY_ACCESS_ENABLED",
@@ -877,7 +877,7 @@
"VehicleAirbagLocation"
],
"data_enum": "VehicleAirbagLocation",
- "description": "Seat airbags deployed\nBit flag property to relay information on which airbags have been deployed in the vehicle at each seat, vs which ones are currently still armed. If SEAT_AIRBAG_ENABLED is set to false at a particular areaId, this property should return status code UNAVAILABLE at that areaId.\nEnums apply to each seat, not the global vehicle. For example, VehicleAirbagsLocation#CURTAIN at the driver seat areaId represents whether the driver side curtain airbag has been deployed. Multiple bit flags can be set to indicate that multiple different airbags have been deployed for the seat.\nFor each seat area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended)."
+ "description": "Seat airbags deployed\nBit flag property to relay information on which airbags have been deployed in the vehicle at each seat, vs which ones are currently still armed. If SEAT_AIRBAG_ENABLED is set to false at a particular areaId, this property should return status code UNAVAILABLE at that areaId.\nEnums apply to each seat, not the global vehicle. For example, VehicleAirbagsLocation#CURTAIN at the driver seat areaId represents whether the driver side curtain airbag has been deployed. Multiple bit flags can be set to indicate that multiple different airbags have been deployed for the seat.\nFor each seat area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states of VehicleAirbagLocation are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "SEAT_CUSHION_SIDE_SUPPORT_POS",
@@ -945,7 +945,7 @@
"WindshieldWipersState"
],
"data_enum": "WindshieldWipersState",
- "description": "Windshield wipers state.\nReturns the current state of the windshield wipers. The value of WINDSHIELD_WIPERS_STATE may not match the value of WINDSHIELD_WIPERS_SWITCH. (e.g. WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_SWITCH = WindshieldWipersSwitch#AUTO).\nIf WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_PERIOD is implemented, then WINDSHIELD_WIPERS_PERIOD must reflect the time period of 1 full cycle of the wipers.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended)."
+ "description": "Windshield wipers state.\nReturns the current state of the windshield wipers. The value of WINDSHIELD_WIPERS_STATE may not match the value of WINDSHIELD_WIPERS_SWITCH. (e.g. WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_SWITCH = WindshieldWipersSwitch#AUTO).\nIf WINDSHIELD_WIPERS_STATE = ON and WINDSHIELD_WIPERS_PERIOD is implemented, then WINDSHIELD_WIPERS_PERIOD must reflect the time period of 1 full cycle of the wipers.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states in WindshieldWipersState are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "Windshield wipers switch.",
@@ -954,7 +954,7 @@
"WindshieldWipersSwitch"
],
"data_enum": "WindshieldWipersSwitch",
- "description": "Windshield wipers switch.\nRepresents the position of the switch controlling the windshield wipers. The value of WINDSHIELD_WIPERS_SWITCH may not match the value of WINDSHIELD_WIPERS_STATE (e.g. WINDSHIELD_WIPERS_SWITCH = AUTO and WINDSHIELD_WIPERS_STATE = WindshieldWipersState#ON).\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended).\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only.\nIf this property is implemented as VehiclePropertyAccess.READ_WRITE and the OTHER state is listed in the VehicleAreaConfig#supportedEnumValues array, then OTHER is not a supported value for writing. It is only a supported value for reading."
+ "description": "Windshield wipers switch.\nRepresents the position of the switch controlling the windshield wipers. The value of WINDSHIELD_WIPERS_SWITCH may not match the value of WINDSHIELD_WIPERS_STATE (e.g. WINDSHIELD_WIPERS_SWITCH = AUTO and WINDSHIELD_WIPERS_STATE = WindshieldWipersState#ON).\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended).\nIf {@code HasSupportedValueInfo} for a specific area ID is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not recommended). At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only.\nIf this property is implemented as VehiclePropertyAccess.READ_WRITE and the OTHER state is listed in the VehicleAreaConfig#supportedEnumValues array, then OTHER is not a supported value for writing. It is only a supported value for reading."
},
{
"name": "Steering wheel depth position",
@@ -1176,7 +1176,7 @@
"VehicleLightState"
],
"data_enum": "VehicleLightState",
- "description": "Steering wheel lights state\nRepresents the current state of the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, STEERING_WHEEL_LIGHTS_STATE may not match the value of STEERING_WHEEL_LIGHTS_SWITCH (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported."
+ "description": "Steering wheel lights state\nRepresents the current state of the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_SWITCH which represents the position of the switch controlling the lights. Therefore, STEERING_WHEEL_LIGHTS_STATE may not match the value of STEERING_WHEEL_LIGHTS_SWITCH (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_STATE's value may be different from that of CABIN_LIGHTS_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleLightState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "Steering wheel lights switch",
@@ -1185,7 +1185,7 @@
"VehicleLightSwitch"
],
"data_enum": "VehicleLightSwitch",
- "description": "Steering wheel lights switch\nRepresents the position of the switch controlling the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_STATE which represents the current state of the steering wheel lights. Therefore, STEERING_WHEEL_LIGHTS_SWITCH may not match the value of STEERING_WHEEL_LIGHTS_STATE (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Steering wheel lights switch\nRepresents the position of the switch controlling the steering wheel lights. This is different from STEERING_WHEEL_LIGHTS_STATE which represents the current state of the steering wheel lights. Therefore, STEERING_WHEEL_LIGHTS_SWITCH may not match the value of STEERING_WHEEL_LIGHTS_STATE (e.g. STEERING_WHEEL_LIGHTS_SWITCH=AUTOMATIC and STEERING_WHEEL_LIGHTS_STATE=ON).\nThis property should only be implemented if STEERING_WHEEL_LIGHTS_SWITCH's value may be different from that of CABIN_LIGHTS_SWITCH.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of VehicleLightSwitch are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleLightSwitch are supported. At boot, the supported values list is the same as supportedEnumValues.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "SUPPORT_CUSTOMIZE_VENDOR_PERMISSION",
@@ -1428,7 +1428,7 @@
"VehicleAutonomousState"
],
"data_enum": "VehicleAutonomousState",
- "description": "Current state of vehicle autonomy.\nDefines the level of autonomy currently engaged in the vehicle from the J3016_202104 revision of the SAE standard levels 0-5, with 0 representing no autonomy and 5 representing full driving automation.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAutonomousState are supported."
+ "description": "Current state of vehicle autonomy.\nDefines the level of autonomy currently engaged in the vehicle from the J3016_202104 revision of the SAE standard levels 0-5, with 0 representing no autonomy and 5 representing full driving automation.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of VehicleAutonomousState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of VehicleAutonomousState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "VEHICLE_DRIVING_AUTOMATION_TARGET_LEVEL",
@@ -1466,7 +1466,7 @@
"ErrorState"
],
"data_enum": "AutomaticEmergencyBrakingState",
- "description": "Automatic Emergency Braking (AEB) state.\nReturns the current state of AEB. This property must always return a valid state defined in AutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property should apply for higher speed applications only. For representing the state of the low speed automatic emergency braking system, LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_STATE should be used.\nIf AEB includes forward collision warnings before activating the brakes, those warnings must be surfaced through the Forward Collision Warning (FCW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Automatic Emergency Braking (AEB) state.\nReturns the current state of AEB. This property must always return a valid state defined in AutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property should apply for higher speed applications only. For representing the state of the low speed automatic emergency braking system, LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_STATE should be used.\nIf AEB includes forward collision warnings before activating the brakes, those warnings must be surfaced through the Forward Collision Warning (FCW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "FORWARD_COLLISION_WARNING_ENABLED",
@@ -1481,7 +1481,7 @@
"ErrorState"
],
"data_enum": "ForwardCollisionWarningState",
- "description": "Forward Collision Warning (FCW) state.\nReturns the current state of FCW. This property must always return a valid state defined in ForwardCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Forward Collision Warning (FCW) state.\nReturns the current state of FCW. This property must always return a valid state defined in ForwardCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both ForwardCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "BLIND_SPOT_WARNING_ENABLED",
@@ -1496,7 +1496,7 @@
"ErrorState"
],
"data_enum": "BlindSpotWarningState",
- "description": "Blind Spot Warning (BSW) state.\nReturns the current state of BSW. This property must always return a valid state defined in BlindSpotWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Blind Spot Warning (BSW) state.\nReturns the current state of BSW. This property must always return a valid state defined in BlindSpotWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor each supported area ID, the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both BlindSpotWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "LANE_DEPARTURE_WARNING_ENABLED",
@@ -1511,7 +1511,7 @@
"ErrorState"
],
"data_enum": "LaneDepartureWarningState",
- "description": "Lane Departure Warning (LDW) state.\nReturns the current state of LDW. This property must always return a valid state defined in LaneDepartureWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Lane Departure Warning (LDW) state.\nReturns the current state of LDW. This property must always return a valid state defined in LaneDepartureWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneDepartureWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "LANE_KEEP_ASSIST_ENABLED",
@@ -1526,7 +1526,7 @@
"ErrorState"
],
"data_enum": "LaneKeepAssistState",
- "description": "Lane Keep Assist (LKA) state.\nReturns the current state of LKA. This property must always return a valid state defined in LaneKeepAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LKA includes lane departure warnings before applying steering corrections, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Lane Keep Assist (LKA) state.\nReturns the current state of LKA. This property must always return a valid state defined in LaneKeepAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LKA includes lane departure warnings before applying steering corrections, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "LANE_CENTERING_ASSIST_ENABLED",
@@ -1540,7 +1540,7 @@
"LaneCenteringAssistCommand"
],
"data_enum": "LaneCenteringAssistCommand",
- "description": "Lane Centering Assist (LCA) commands.\nCommands to activate and suspend LCA.\nWhen the command ACTIVATE from LaneCenteringAssistCommand is sent, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATION_REQUESTED. When the ACTIVATE command succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATED. When the command DEACTIVATE from LaneCenteringAssistCommand succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ENABLED.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of LaneCenteringAssistCommand are supported.\nWhen this property is not available because LCA is disabled (i.e. LANE_CENTERING_ASSIST_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If LANE_CENTERING_ASSIST_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if LANE_CENTERING_ASSIST_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
+ "description": "Lane Centering Assist (LCA) commands.\nCommands to activate and suspend LCA.\nWhen the command ACTIVATE from LaneCenteringAssistCommand is sent, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATION_REQUESTED. When the ACTIVATE command succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ACTIVATED. When the command DEACTIVATE from LaneCenteringAssistCommand succeeds, LANE_CENTERING_ASSIST_STATE must be set to LaneCenteringAssistState#ENABLED.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless all enum values of LaneCenteringAssistCommand are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all enum values of LaneCenteringAssistCommand are supported. At boot, the supported values list is the same as supportedEnumValues.\nWhen this property is not available because LCA is disabled (i.e. LANE_CENTERING_ASSIST_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If LANE_CENTERING_ASSIST_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if LANE_CENTERING_ASSIST_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
},
{
"name": "LANE_CENTERING_ASSIST_STATE",
@@ -1550,7 +1550,7 @@
"ErrorState"
],
"data_enum": "LaneCenteringAssistState",
- "description": "Lane Centering Assist (LCA) state.\nReturns the current state of LCA. This property must always return a valid state defined in LaneCenteringAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LCA includes lane departure warnings, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Lane Centering Assist (LCA) state.\nReturns the current state of LCA. This property must always return a valid state defined in LaneCenteringAssistState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nIf LCA includes lane departure warnings, those warnings must be surfaced through the Lane Departure Warning (LDW) properties.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LaneCenteringAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "EMERGENCY_LANE_KEEP_ASSIST_ENABLED",
@@ -1565,7 +1565,7 @@
"ErrorState"
],
"data_enum": "EmergencyLaneKeepAssistState",
- "description": "Emergency Lane Keep Assist (ELKA) state.\nReturns the current state of ELKA. Generally, this property should return a valid state defined in the EmergencyLaneKeepAssistState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Emergency Lane Keep Assist (ELKA) state.\nReturns the current state of ELKA. Generally, this property should return a valid state defined in the EmergencyLaneKeepAssistState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "CRUISE_CONTROL_ENABLED",
@@ -1580,7 +1580,7 @@
"ErrorState"
],
"data_enum": "CruiseControlType",
- "description": "Current type of Cruise Control (CC).\nWhen CRUISE_CONTROL_ENABLED is true, this property returns the type of CC that is currently enabled (for example, standard CC, adaptive CC, predictive CC, etc.). Generally, this property should return a valid state defined in the CruiseControlType or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported.\nTrying to write CruiseControlType#OTHER or an ErrorState to this property will throw an IllegalArgumentException.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
+ "description": "Current type of Cruise Control (CC).\nWhen CRUISE_CONTROL_ENABLED is true, this property returns the type of CC that is currently enabled (for example, standard CC, adaptive CC, predictive CC, etc.). Generally, this property should return a valid state defined in the CruiseControlType or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlType (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues.\nTrying to write CruiseControlType#OTHER or an ErrorState to this property will throw an IllegalArgumentException.\nThis property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only."
},
{
"name": "CRUISE_CONTROL_STATE",
@@ -1590,7 +1590,7 @@
"ErrorState"
],
"data_enum": "CruiseControlState",
- "description": "Current state of Cruise Control (CC).\nThis property returns the current state of CC. Generally, this property should return a valid state defined in the CruiseControlState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Current state of Cruise Control (CC).\nThis property returns the current state of CC. Generally, this property should return a valid state defined in the CruiseControlState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "CRUISE_CONTROL_COMMAND",
@@ -1599,7 +1599,7 @@
"CruiseControlCommand"
],
"data_enum": "CruiseControlCommand",
- "description": "Write Cruise Control (CC) commands.\nSee CruiseControlCommand for the details about each supported command.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState are supported. Any unsupported commands sent through this property must return StatusCode#INVALID_ARG.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
+ "description": "Write Cruise Control (CC) commands.\nSee CruiseControlCommand for the details about each supported command.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of CruiseControlState are supported. Any unsupported commands sent through this property must return StatusCode#INVALID_ARG.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of CruiseControlState are supported. At boot, the supported values list is the same as supportedEnumValues.\nWhen this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE is implemented and the state is set to an ErrorState value, then this property must return a StatusCode that aligns with the ErrorState value. For example, if CRUISE_CONTROL_STATE is set to ErrorState#NOT_AVAILABLE_SPEED_LOW, then this property must return StatusCode#NOT_AVAILABLE_SPEED_LOW."
},
{
"name": "CRUISE_CONTROL_TARGET_SPEED",
@@ -1629,7 +1629,7 @@
"ErrorState"
],
"data_enum": "HandsOnDetectionDriverState",
- "description": "Hands On Detection (HOD) driver state.\nReturns whether the driver's hands are on the steering wheel. Generally, this property should return a valid state defined in the HandsOnDetectionDriverState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle wants to send a warning to the user because the driver's hands have been off the steering wheel for too long, the warning should be surfaced through HANDS_ON_DETECTION_WARNING.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Hands On Detection (HOD) driver state.\nReturns whether the driver's hands are on the steering wheel. Generally, this property should return a valid state defined in the HandsOnDetectionDriverState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle wants to send a warning to the user because the driver's hands have been off the steering wheel for too long, the warning should be surfaced through HANDS_ON_DETECTION_WARNING.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both HandsOnDetectionDriverState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "HANDS_ON_DETECTION_WARNING",
@@ -1639,7 +1639,7 @@
"ErrorState"
],
"data_enum": "HandsOnDetectionWarning",
- "description": "Hands On Detection (HOD) warning.\nReturns whether a warning is being sent to the driver for having their hands off the wheel for too long a duration.\nGenerally, this property should return a valid state defined in HandsOnDetectionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Hands On Detection (HOD) warning.\nReturns whether a warning is being sent to the driver for having their hands off the wheel for too long a duration.\nGenerally, this property should return a valid state defined in HandsOnDetectionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "DRIVER_DROWSINESS_ATTENTION_SYSTEM_ENABLED",
@@ -1654,7 +1654,7 @@
"ErrorState"
],
"data_enum": "DriverDrowsinessAttentionState",
- "description": "Driver drowsiness and attention level state.\nReturns the current detected state of driver drowiness and attention level based on the Karolinska Sleepiness scale. If alternative measurement methods are used, the value should be translated to the Karolinska Sleepiness Scale equivalent.\nGenerally, this property should return a valid state defined in the DriverDrowsinessAttentionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too drowsy, the warning should be surfaced through {@link #DRIVER_DROWSINESS_ATTENTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Driver drowsiness and attention level state.\nReturns the current detected state of driver drowiness and attention level based on the Karolinska Sleepiness scale. If alternative measurement methods are used, the value should be translated to the Karolinska Sleepiness Scale equivalent.\nGenerally, this property should return a valid state defined in the DriverDrowsinessAttentionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too drowsy, the warning should be surfaced through {@link #DRIVER_DROWSINESS_ATTENTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "DRIVER_DROWSINESS_ATTENTION_WARNING_ENABLED",
@@ -1669,7 +1669,7 @@
"ErrorState"
],
"data_enum": "DriverDrowsinessAttentionWarning",
- "description": "Driver drowsiness and attention warning.\nReturns whether a warning is being sent to the driver for being drowsy or not attentive.\nGenerally, this property should return a valid state defined in DriverDrowsinessAttentionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Driver drowsiness and attention warning.\nReturns whether a warning is being sent to the driver for being drowsy or not attentive.\nGenerally, this property should return a valid state defined in DriverDrowsinessAttentionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "DRIVER_DISTRACTION_SYSTEM_ENABLED",
@@ -1684,7 +1684,7 @@
"ErrorState"
],
"data_enum": "DriverDistractionState",
- "description": "Driver distraction state.\nReturns the current detected driver distraction state.\nGenerally, this property should return a valid state defined in the DriverDistractionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too distracted, the warning should be surfaced through {@link #DRIVER_DISTRACTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Driver distraction state.\nReturns the current detected driver distraction state.\nGenerally, this property should return a valid state defined in the DriverDistractionState or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through ErrorState.\nIf the vehicle is sending a warning to the user because the driver is too distracted, the warning should be surfaced through {@link #DRIVER_DISTRACTION_WARNING}.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDistractionState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "DRIVER_DISTRACTION_WARNING_ENABLED",
@@ -1699,7 +1699,7 @@
"ErrorState"
],
"data_enum": "DriverDistractionWarning",
- "description": "Driver distraction warning.\nReturns whether a warning is being sent to the driver for being distracted.\nGenerally, this property should return a valid state defined in DriverDistractionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Driver distraction warning.\nReturns whether a warning is being sent to the driver for being distracted.\nGenerally, this property should return a valid state defined in DriverDistractionWarning or ErrorState. For example, if the feature is not available due to some temporary state, that information should be conveyed through an ErrorState.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both DriverDistractionWarning (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "LOW_SPEED_COLLISION_WARNING_ENABLED",
@@ -1714,7 +1714,7 @@
"ErrorState"
],
"data_enum": "LowSpeedCollisionWarningState",
- "description": "Low Speed Collision Warning state.\nReturns the current state of Low Speed Collision Warning. This property must always return a valid state defined in LowSpeedCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing FORWARD_COLLISION_WARNING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision detection system for low speed environments, this property should not be implemented.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Low Speed Collision Warning state.\nReturns the current state of Low Speed Collision Warning. This property must always return a valid state defined in LowSpeedCollisionWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing FORWARD_COLLISION_WARNING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision detection system for low speed environments, this property should not be implemented.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "CROSS_TRAFFIC_MONITORING_ENABLED",
@@ -1729,7 +1729,7 @@
"ErrorState"
],
"data_enum": "CrossTrafficMonitoringWarningState",
- "description": "Cross Traffic Monitoring warning state.\nReturns the current state of Cross Traffic Monitoring Warning. This property must always return a valid state defined in CrossTrafficMonitoringWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Cross Traffic Monitoring warning state.\nReturns the current state of Cross Traffic Monitoring Warning. This property must always return a valid state defined in CrossTrafficMonitoringWarningState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
},
{
"name": "LOW_SPEED_AUTOMATIC_EMERGENCY_BRAKING_ENABLED",
@@ -1744,7 +1744,7 @@
"ErrorState"
],
"data_enum": "LowSpeedAutomaticEmergencyBrakingState",
- "description": "Low Speed Automatic Emergency Braking state.\nReturns the current state of Low Speed Automatic Emergency Braking. This property must always return a valid state defined in LowSpeedAutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing AUTOMATIC_EMERGENCY_BRAKING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision avoidance system for low speed environments, this property should not be implemented.\nIf Low Speed Automatic Emergency Braking includes collision warnings before activating the brakes, those warnings must be surfaced through use of LOW_SPEED_COLLISION_WARNING_ENABLED and LOW_SPEED_COLLISION_WARNING_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported."
+ "description": "Low Speed Automatic Emergency Braking state.\nReturns the current state of Low Speed Automatic Emergency Braking. This property must always return a valid state defined in LowSpeedAutomaticEmergencyBrakingState or ErrorState. It must not surface errors through StatusCode and must use the supported error states instead. This property is different from the pre-existing AUTOMATIC_EMERGENCY_BRAKING_STATE, which should apply to higher speed applications only. If the vehicle doesn't have a separate collision avoidance system for low speed environments, this property should not be implemented.\nIf Low Speed Automatic Emergency Braking includes collision warnings before activating the brakes, those warnings must be surfaced through use of LOW_SPEED_COLLISION_WARNING_ENABLED and LOW_SPEED_COLLISION_WARNING_STATE.\nFor the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported.\nIf {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}: {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is not recommended) and ErrorState are supported. At boot, the supported values list is the same as supportedEnumValues."
}
]
},
diff --git a/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl b/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
index 7f5aeb0..09f7941 100644
--- a/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
+++ b/automotive/vehicle/aidl_property/android/hardware/automotive/vehicle/VehicleProperty.aidl
@@ -1875,6 +1875,14 @@
* For example: configArray[0] = LITER
* configArray[1] = GALLON
*
+ * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+ * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+ * (0) must be {@code true}.
+ * {@code getSupportedValuesLists} for [FUEL_VOLUME_DISPLAY_UNITS, areaId=0] must return a
+ * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
+ * e.g. [LITER, GALLON].
+ * At boot, the values in the config array are equal to the supported values list.
+ *
* If updating FUEL_VOLUME_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties,
* then their values must be updated and communicated to the AAOS framework as well.
*
@@ -1885,6 +1893,8 @@
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
* @data_enum VehicleUnit
+ * @require_supported_values_list
+ * @legacy_supported_values_in_config
* @version 2
*/
FUEL_VOLUME_DISPLAY_UNITS = 0x0601 + 0x10000000 + 0x01000000
@@ -1901,6 +1911,14 @@
* configArray[1] = PSI
* configArray[2] = BAR
*
+ * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+ * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+ * (0) must be {@code true}.
+ * {@code getSupportedValuesLists} for [TIRE_PRESSURE_DISPLAY_UNITS, areaId=0] must return a
+ * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
+ * e.g. [KILOPASCAL, PSI, BAR].
+ * At boot, the values in the config array are equal to the supported values list.
+ *
* If updating TIRE_PRESSURE_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS
* properties, then their values must be updated and communicated to the AAOS framework as well.
*
@@ -1911,6 +1929,8 @@
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
* @data_enum VehicleUnit
+ * @require_supported_values_list
+ * @legacy_supported_values_in_config
* @version 2
*/
TIRE_PRESSURE_DISPLAY_UNITS = 0x0602 + 0x10000000 + 0x01000000
@@ -1927,6 +1947,14 @@
* configArray[1] = AMPERE_HOURS
* configArray[2] = KILOWATT_HOUR
*
+ * If {@code HasSupportedValueInfo} is not {@code null} for the global area ID (0):
+ * {@code VehicleAreaConfig.HasSupportedValueInfo.hasSupportedValuesList} for the global area ID
+ * (0) must be {@code true}.
+ * {@code getSupportedValuesLists} for [EV_BATTERY_DISPLAY_UNITS, areaId=0] must return a
+ * {@code SupportedValuesListResult} that contains non-null {@code supportedValuesList},
+ * e.g. [WATT_HOUR, AMPERE_HOURS, KILOWATT_HOUR].
+ * At boot, the values in the config array are equal to the supported values list.
+ *
* If updating EV_BATTERY_DISPLAY_UNITS affects the values of other *_DISPLAY_UNITS properties,
* then their values must be updated and communicated to the AAOS framework as well.
*
@@ -1937,6 +1965,8 @@
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
* @data_enum VehicleUnit
+ * @require_supported_values_list
+ * @legacy_supported_values_in_config
* @version 2
*/
EV_BATTERY_DISPLAY_UNITS = 0x0603 + 0x10000000 + 0x01000000
@@ -2403,11 +2433,21 @@
* All integers between minInt32Value and maxInt32Value must be supported.
*
* The minInt32Value indicates the door is closed. The minInt32Value must be 0.
+ *
* The maxInt32Value indicates the door is fully open.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* closed and fully open positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* Some vehicles (minivans) can open the door electronically. Hence, the
@@ -2419,6 +2459,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
DOOR_POS = 0x0B00 + 0x10000000 + 0x06000000
@@ -2429,13 +2470,23 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the door while opening.
* The minInt32Value represents the maximum movement speed of the door while closing.
*
+ * The maxInt32Value represents the maximum movement speed of the door while opening.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the door reaches the positional limit, the value must reset to 0. If DOOR_MOVE's value is
* currently 0, then that means there is no movement currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -2445,6 +2496,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
DOOR_MOVE = 0x0B01 + 0x10000000 + 0x06000000
@@ -2489,13 +2541,26 @@
*
* The minInt32Value indicates the mirror is tilted completely downwards. This must be a
* non-positive value.
+ *
* The maxInt32Value indicates the mirror is tilted completely upwards. This must be a
* non-negative value.
+ *
* 0 indicates the mirror is not tilted in either direction.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* fully downward and fully upwards positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+ * the fully downward and fully upwards positions.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2504,6 +2569,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
MIRROR_Z_POS = 0x0B40 + 0x10000000 + 0x04000000
@@ -2514,14 +2580,24 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the mirror while tilting upwards.
* The minInt32Value represents the maximum movement speed of the mirror while tilting
* downwards.
*
+ * The maxInt32Value represents the maximum movement speed of the mirror while tilting upwards.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Z_MOVE's value
* is currently 0, then that means there is no movement currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -2531,6 +2607,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
MIRROR_Z_MOVE = 0x0B41 + 0x10000000 + 0x04000000
@@ -2543,13 +2620,26 @@
*
* The minInt32Value indicates the mirror is tilted completely to the left. This must be a
* non-positive value.
+ *
* The maxInt32Value indicates the mirror is tilted completely to the right. This must be a
* non-negative value.
+ *
* 0 indicates the mirror is not tilted in either direction.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* left extreme and right extreme positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+ * the fully downward and fully upwards positions.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2558,6 +2648,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
MIRROR_Y_POS = 0x0B42 + 0x10000000 + 0x04000000
@@ -2568,13 +2659,23 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the mirror while tilting right.
* The minInt32Value represents the maximum movement speed of the mirror while tilting left.
*
+ * The maxInt32Value represents the maximum movement speed of the mirror while tilting right.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the mirror reaches the positional limit, the value must reset to 0. If MIRROR_Y_MOVE's value
* is currently 0, then that means there is no movement currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -2584,6 +2685,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
MIRROR_Y_MOVE = 0x0B43 + 0x10000000 + 0x04000000
@@ -2660,17 +2762,30 @@
/**
* Seat memory select
*
- * This parameter selects the memory preset to use to select the seat position. The
- * maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between
- * minInt32Value and maxInt32Value must be supported. The minInt32Value is always 0, and the
- * maxInt32Value determines the number of seat preset memory slots available (i.e.
- * numSeatPresets - 1).
+ * This parameter selects the memory preset to use to select the seat position.
+ *
+ * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
+ *
+ * All integers between minInt32Value and maxInt32Value must be supported.
+ *
+ * The minInt32Value is always 0, and the maxInt32Value determines the number of seat preset
+ * memory slots available (i.e. numSeatPresets - 1).
*
* For instance, if the driver's seat has 3 memory presets, the maxInt32Value will be 2. When
* the user wants to select a preset, the desired preset number (0, 1, or 2) is set.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.WRITE
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_MEMORY_SELECT = 0x0B80 + 0x10000000 + 0x05000000
@@ -2679,12 +2794,24 @@
* Seat memory set
*
* This setting allows the user to save the current seat position settings into the selected
- * preset slot. The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. The
- * minInt32Value must be 0, and the maxInt32Value for each seat position must match the
+ * preset slot.
+ *
+ * The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined.
+ *
+ * The minInt32Value must be 0, and the maxInt32Value for each seat position must match the
* maxInt32Value for SEAT_MEMORY_SELECT.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.WRITE
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_MEMORY_SET = 0x0B81 + 0x10000000 + 0x05000000
@@ -2716,11 +2843,22 @@
* All integers between minInt32Value and maxInt32Value must be supported.
*
* The minInt32Value indicates the seat belt's shoulder anchor is at its lowest position.
+ *
* The maxInt32Value indicates the seat belt's shoulder anchor is at its highest position.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* lowest and highest positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+ * the lowest and highest positions. All integers between minSupportedValue and
+ * maxSupportedValue must be supported. At boot, minInt32Value is equal to minSupportedValue,
+ * maxInt32Value is equal to maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2729,6 +2867,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_BELT_HEIGHT_POS = 0x0B83 + 0x10000000 + 0x05000000
@@ -2739,16 +2878,26 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor
- * while moving upwards.
* The minInt32Value represents the maximum movement speed of the seat belt's shoulder anchor
* while moving downwards.
*
+ * The maxInt32Value represents the maximum movement speed of the seat belt's shoulder anchor
+ * while moving upwards.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat belt reaches the positional limit, the value must reset to 0. If
* SEAT_BELT_HEIGHT_MOVE's value is currently 0, then that means there is no movement currently
* occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -2758,6 +2907,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_BELT_HEIGHT_MOVE = 0x0B84 + 0x10000000 + 0x05000000
@@ -2771,11 +2921,21 @@
* All integers between minInt32Value and maxInt32Value must be supported.
*
* The minInt32Value indicates the seat is at its rearward-most linear position.
+ *
* The maxInt32Value indicates the seat is at its forward-most linear position.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* closest and farthest positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2784,6 +2944,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_FORE_AFT_POS = 0x0B85 + 0x10000000 + 0x05000000
@@ -2796,13 +2957,23 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat while moving forward.
* The minInt32Value represents the maximum movement speed of the seat while moving backward.
*
+ * The maxInt32Value represents the maximum movement speed of the seat while moving forward.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat reaches the positional limit, the value must reset to 0. If SEAT_FORE_AFT_MOVE's
* value is currently 0, then that means there is no movement currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -2812,6 +2983,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_FORE_AFT_MOVE = 0x0B86 + 0x10000000 + 0x05000000
@@ -2826,12 +2998,24 @@
*
* The minInt32Value indicates the seat backrest's full recline position w.r.t the
* actuator at the bottom of the seat.
+ *
* The maxInt32Value indicates the seat backrest's most upright/forward position w.r.t the
* actuator at the bottom of the seat.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* full recline and upright/forward positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+ * the full recline and upright/forward positions.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2840,6 +3024,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_BACKREST_ANGLE_1_POS = 0x0B87 + 0x10000000 + 0x05000000
@@ -2850,15 +3035,25 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
+ * The minInt32Value represents the maximum movement speed of the seat backrest while reclining.
+ *
* The maxInt32Value represents the maximum movement speed of the seat backrest while angling
* forward.
- * The minInt32Value represents the maximum movement speed of the seat backrest while reclining.
*
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat backrest reaches the positional limit, the value must reset to 0. If
* SEAT_BACKREST_ANGLE_1_MOVE's value is currently 0, then that means there is no movement
* currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -2868,6 +3063,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_BACKREST_ANGLE_1_MOVE = 0x0B88 + 0x10000000 + 0x05000000
@@ -2883,6 +3079,7 @@
* The minInt32Value indicates the seat backrest's full recline position w.r.t the next
* actuator in the backrest from the one at the bottom of the seat (see
* SEAT_BACKREST_ANGLE_1_POS for additional details).
+ *
* The maxInt32Value indicates the seat backrest's most upright/forward position w.r.t the
* next actuator in the backrest from the one at the bottom of the seat(see
* SEAT_BACKREST_ANGLE_1_POS for additional details).
@@ -2890,6 +3087,17 @@
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* full recline and upright/forward positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} ihas the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * Values in between minSupportedValue and maxSupportedValue indicate a transition state between
+ * the full recline and upright/forward positions.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2898,6 +3106,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_BACKREST_ANGLE_2_POS = 0x0B89 + 0x10000000 + 0x05000000
@@ -2908,15 +3117,25 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
+ * The minInt32Value represents the maximum movement speed of the seat backrest while reclining.
+ *
* The maxInt32Value represents the maximum movement speed of the seat backrest while angling
* forward.
- * The minInt32Value represents the maximum movement speed of the seat backrest while reclining.
*
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat backrest reaches the positional limit, the value must reset to 0. If
* SEAT_BACKREST_ANGLE_2_MOVE's value is currently 0, then that means there is no movement
* currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -2926,6 +3145,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_BACKREST_ANGLE_2_MOVE = 0x0B8A + 0x10000000 + 0x05000000
@@ -2937,11 +3157,22 @@
* All integers between minInt32Value and maxInt32Value must be supported.
*
* The minInt32Value indicates the seat is in its lowest position.
+ *
* The maxInt32Value indicates the seat is in its highest position.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* lowest and highest positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * position.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -2950,6 +3181,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_HEIGHT_POS = 0x0B8B + 0x10000000 + 0x05000000
@@ -2960,13 +3192,23 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat while moving upward.
* The minInt32Value represents the maximum movement speed of the seat while moving downward.
*
+ * The maxInt32Value represents the maximum movement speed of the seat while moving upward.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat reaches the positional limit, the value must reset to 0. If SEAT_HEIGHT_MOVE's value
* is currently 0, then that means there is no movement currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -2976,6 +3218,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_HEIGHT_MOVE = 0x0B8C + 0x10000000 + 0x05000000
@@ -2991,12 +3234,22 @@
* The minInt32Value indicates the seat is in its shallowest position (i.e. the position with
* the smallest distance between the front edge of the seat cushion and the rear end of the
* seat).
+ *
* The maxInt32Value indicates the seat is in its deepest position (i.e. the position with the
* largest distance between the front edge of the seat cushion and the rear end of the seat).
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* shallowest and deepest positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3005,6 +3258,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_DEPTH_POS = 0x0B8D + 0x10000000 + 0x05000000
@@ -3015,14 +3269,24 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat while getting deeper
* The minInt32Value represents the maximum movement speed of the seat while getting shallower.
*
+ * The maxInt32Value represents the maximum movement speed of the seat while getting deeper.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat backrest reaches the positional limit, the value must reset to 0. If
* SEAT_DEPTH_MOVE's value is currently 0, then that means there is no movement currently
* occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -3032,6 +3296,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_DEPTH_MOVE = 0x0B8E + 0x10000000 + 0x05000000
@@ -3045,6 +3310,7 @@
* The minInt32Value indicates the seat bottom is angled at its lowest angular position. This
* corresponds to the seat's front edge at its lowest possible position relative to the rear
* end of the seat.
+ *
* The maxInt32Value indicates the seat bottom is angled at its highest angular position. This
* corresponds to the seat's front edge at its highest possible position relative to the rear
* end of the seat.
@@ -3052,6 +3318,15 @@
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* lowest and highest positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3060,6 +3335,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_TILT_POS = 0x0B8F + 0x10000000 + 0x05000000
@@ -3070,15 +3346,25 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the front edge of the seat while
- * moving upward.
* The minInt32Value represents the maximum movement speed of the front edge of the seat while
* moving downward.
*
+ * The maxInt32Value represents the maximum movement speed of the front edge of the seat while
+ * moving upward.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat bottom reaches the positional limit, the value must reset to 0. If SEAT_TILT_MOVE's
* value is currently 0, then that means there is no movement currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -3088,6 +3374,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_TILT_MOVE = 0x0B90 + 0x10000000 + 0x05000000
@@ -3100,12 +3387,22 @@
*
* The minInt32Value indicates the lumbar support is in its rearward most position (i.e. least
* supportive position).
+ *
* The maxInt32Value indicates the lumbar support is in its forward most position (i.e. most
* supportive position).
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* forward and rearward positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3114,6 +3411,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_LUMBAR_FORE_AFT_POS = 0x0B91 + 0x10000000 + 0x05000000
@@ -3124,16 +3422,26 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat's lumbar support while
- * moving forward.
* The minInt32Value represents the maximum movement speed of the seat's lumbar support while
* moving backward.
*
+ * The maxInt32Value represents the maximum movement speed of the seat's lumbar support while
+ * moving forward.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat's lumbar support reaches the positional limit, the value must reset to 0. If
* SEAT_LUMBAR_FORE_AFT_MOVE's value is currently 0, then that means there is no movement
* currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -3143,6 +3451,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_LUMBAR_FORE_AFT_MOVE = 0x0B92 + 0x10000000 + 0x05000000
@@ -3155,12 +3464,22 @@
*
* The minInt32Value indicates the lumbar side support is in its thinnest position (i.e.
* most support).
+ *
* The maxInt32Value indicates the lumbar side support is in its widest position (i.e.
* least support).
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* thinnest and widest positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3169,6 +3488,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_LUMBAR_SIDE_SUPPORT_POS = 0x0B93 + 0x10000000 + 0x05000000
@@ -3179,16 +3499,26 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat's lumbar side support
- * while getting wider.
* The minInt32Value represents the maximum movement speed of the seat's lumbar side support
* while getting thinner.
*
+ * The maxInt32Value represents the maximum movement speed of the seat's lumbar side support
+ * while getting wider.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat's lumbar side support reaches the positional limit, the value must reset to 0. If
* SEAT_LUMBAR_SIDE_SUPPORT_MOVE's value is currently 0, then that means there is no movement
* currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -3198,6 +3528,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_LUMBAR_SIDE_SUPPORT_MOVE = 0x0B94 + 0x10000000 + 0x05000000
@@ -3234,11 +3565,21 @@
* All integers between minInt32Value and maxInt32Value must be supported.
*
* The minInt32Value indicates the headrest is in its lowest position.
+ *
* The maxInt32Value indicates the headrest is in its highest position.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* lowest and highest positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3247,6 +3588,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_HEADREST_HEIGHT_POS_V2 =
@@ -3258,16 +3600,26 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
- * up.
* The minInt32Value represents the maximum movement speed of the seat's headrest while moving
* down.
*
+ * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
+ * up.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat's headrest reaches the positional limit, the value must reset to 0. If
* SEAT_HEADREST_HEIGHT_MOVE's value is currently 0, then that means there is no movement
* currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -3277,6 +3629,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_HEADREST_HEIGHT_MOVE = 0x0B96 + 0x10000000 + 0x05000000
@@ -3288,11 +3641,21 @@
* All integers between minInt32Value and maxInt32Value must be supported.
*
* The minInt32Value indicates the headrest is in its full recline position.
+ *
* The maxInt32Value indicates the headrest is in its most upright/forward position.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* full recline and most upright/forward positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3301,6 +3664,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_HEADREST_ANGLE_POS = 0x0B97 + 0x10000000 + 0x05000000
@@ -3311,16 +3675,26 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
- * into an upright/forward position.
* The minInt32Value represents the maximum movement speed of the seat's headrest while moving
* into a shallow position.
*
+ * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
+ * into an upright/forward position.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat's headrest reaches the positional limit, the value must reset to 0. If
* SEAT_HEADREST_ANGLE_MOVE's value is currently 0, then that means there is no movement
* currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -3330,6 +3704,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_HEADREST_ANGLE_MOVE = 0x0B98 + 0x10000000 + 0x05000000
@@ -3341,11 +3716,21 @@
* All integers between minInt32Value and maxInt32Value must be supported.
*
* The minInt32Value indicates the headrest is in its rearward-most linear position.
+ *
* The maxInt32Value indicates the headrest is in its forward-most linear position.
*
* Values in between minInt32Value and maxInt32Value indicate a transition state between the
* forward and rearward positions.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative positions.
*
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
@@ -3354,6 +3739,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_HEADREST_FORE_AFT_POS = 0x0B99 + 0x10000000 + 0x05000000
@@ -3364,16 +3750,26 @@
* The maxInt32Value and minInt32Value in each VehicleAreaConfig must be defined. All integers
* between minInt32Value and maxInt32Value must be supported.
*
- * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
- * forward.
* The minInt32Value represents the maximum movement speed of the seat's headrest while moving
* backward.
*
+ * The maxInt32Value represents the maximum movement speed of the seat's headrest while moving
+ * forward.
+ *
* Larger absolute values, either positive or negative, indicate a faster movement speed. Once
* the seat's headrest reaches the positional limit, the value must reset to 0. If
* SEAT_HEADREST_FORE_AFT_MOVE's value is currently 0, then that means there is no movement
* currently occurring.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasMinSupportedValue} and
+ * {@code HasSupportedValueInfo.hasMaxSupportedValue} must be {@code true} for the area ID.
+ * {@code MinMaxSupportedValueResult.minSupportedValue} has the same meaning as minInt32Value.
+ * {@code MinMaxSupportedValueResult.maxSupportedValue} has the same meaning as maxInt32Value.
+ * All integers between minSupportedValue and maxSupportedValue must be supported.
+ * At boot, minInt32Value is equal to minSupportedValue, maxInt32Value is equal to
+ * maxSupportedValue.
+ *
* This property is not in any particular unit but in a specified range of relative movement
* speeds.
*
@@ -3383,6 +3779,7 @@
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ_WRITE
* @access VehiclePropertyAccess.READ
+ * @require_min_max_supported_value
* @version 2
*/
SEAT_HEADREST_FORE_AFT_MOVE = 0x0B9A + 0x10000000 + 0x05000000
@@ -3402,6 +3799,11 @@
* For each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless
* all enum values of VehicleLightState are supported.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+ * unless all enum values of VehicleLightState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum VehicleLightState
@@ -3424,6 +3826,11 @@
* For each supported area ID, the VehicleAreaConfig#supportedEnumValues must be defined unless
* all enum values of VehicleLightSwitch are supported.
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+ * unless all enum values of VehicleLightSwitch are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
* implement it as VehiclePropertyAccess.READ only.
*
@@ -3489,6 +3896,12 @@
* all states of VehicleAirbagLocation are supported (including OTHER, which is not
* recommended).
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+ * unless all states of VehicleAirbagLocation are supported (including OTHER, which is not
+ * recommended).
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum VehicleAirbagLocation
@@ -3792,6 +4205,12 @@
* unless all states in WindshieldWipersState are supported (including OTHER, which is not
* recommended).
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+ * unless all states in WindshieldWipersState are supported (including OTHER, which is not
+ * recommended).
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum WindshieldWipersState
@@ -3811,6 +4230,12 @@
* unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not
* recommended).
*
+ * If {@code HasSupportedValueInfo} for a specific area ID is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true} for the area ID
+ * unless all states in WindshieldWipersSwitch are supported (including OTHER, which is not
+ * recommended).
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
* implement it as VehiclePropertyAccess.READ only.
*
@@ -4576,6 +5001,11 @@
* For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
* all enum values of VehicleLightState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all enum values of VehicleLightState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum VehicleLightState
@@ -4598,6 +5028,11 @@
* For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
* all enum values of VehicleLightSwitch are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all enum values of VehicleLightSwitch are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to
* implement it as VehiclePropertyAccess.READ only.
*
@@ -5622,6 +6057,11 @@
* For the global area ID (0), the VehicleAreaConfig#supportedEnumValues array must be defined
* unless all states of VehicleAutonomousState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all enum values of VehicleAutonomousState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum VehicleAutonomousState
@@ -5749,6 +6189,12 @@
* unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both AutomaticEmergencyBrakingState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum AutomaticEmergencyBrakingState
@@ -5791,6 +6237,12 @@
* unless all states of both ForwardCollisionWarningState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both ForwardCollisionWarningState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum ForwardCollisionWarningState
@@ -5833,6 +6285,12 @@
* unless all states of both BlindSpotWarningState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both BlindSpotWarningState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum BlindSpotWarningState
@@ -5876,6 +6334,12 @@
* unless all states of both LaneDepartureWarningState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both LaneDepartureWarningState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum LaneDepartureWarningState
@@ -5926,6 +6390,12 @@
* unless all states of both LaneKeepAssistState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both LaneKeepAssistState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum LaneKeepAssistState
@@ -5978,6 +6448,11 @@
* For the global area ID (0), the VehicleAreaConfig#supportedEnumValues must be defined unless
* all enum values of LaneCenteringAssistCommand are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all enum values of LaneCenteringAssistCommand are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* When this property is not available because LCA is disabled (i.e.
* LANE_CENTERING_ASSIST_ENABLED is false), this property must return
* StatusCode#NOT_AVAILABLE_DISABLED. If LANE_CENTERING_ASSIST_STATE is implemented and the
@@ -6008,6 +6483,12 @@
* unless all states of both LaneCenteringAssistState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both LaneCenteringAssistState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum LaneCenteringAssistState
@@ -6053,6 +6534,12 @@
* unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended)
* and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of EmergencyLaneKeepAssistState (including OTHER, which is not recommended)
+ * and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum EmergencyLaneKeepAssistState
@@ -6100,6 +6587,12 @@
* unless all states of CruiseControlType (including OTHER, which is not recommended) and
* ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of CruiseControlType (including OTHER, which is not recommended) and
+ * ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* Trying to write CruiseControlType#OTHER or an ErrorState to this property will throw an
* IllegalArgumentException.
*
@@ -6128,6 +6621,12 @@
* unless all states of CruiseControlState (including OTHER, which is not recommended) and
* ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of CruiseControlState (including OTHER, which is not recommended) and
+ * ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum CruiseControlState
@@ -6146,6 +6645,11 @@
* unless all states of CruiseControlState are supported. Any unsupported commands sent through
* this property must return StatusCode#INVALID_ARG.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of CruiseControlState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* When this property is not available because CC is disabled (i.e. CRUISE_CONTROL_ENABLED is
* false), this property must return StatusCode#NOT_AVAILABLE_DISABLED. If CRUISE_CONTROL_STATE
* is implemented and the state is set to an ErrorState value, then this property must return a
@@ -6286,6 +6790,12 @@
* unless all states of both HandsOnDetectionDriverState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both HandsOnDetectionDriverState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum HandsOnDetectionDriverState
@@ -6309,6 +6819,12 @@
* unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended)
* and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both HandsOnDetectionWarning (including OTHER, which is not recommended)
+ * and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum HandsOnDetectionWarning
@@ -6359,6 +6875,12 @@
* unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both DriverDrowsinessAttentionState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum DriverDrowsinessAttentionState
@@ -6406,6 +6928,12 @@
* unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both DriverDrowsinessAttentionWarning (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum DriverDrowsinessAttentionWarning
@@ -6454,6 +6982,12 @@
* unless all states of both DriverDistractionState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both DriverDistractionState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum DriverDistractionState
@@ -6500,6 +7034,12 @@
* unless all states of both DriverDistractionWarning (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both DriverDistractionWarning (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum DriverDistractionWarning
@@ -6549,6 +7089,12 @@
* unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both LowSpeedCollisionWarningState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum LowSpeedCollisionWarningState
@@ -6592,6 +7138,12 @@
* unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not
* recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both CrossTrafficMonitoringWarningState (including OTHER, which is not
+ * recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum CrossTrafficMonitoringWarningState
@@ -6646,6 +7198,12 @@
* unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is
* not recommended) and ErrorState are supported.
*
+ * If {@code HasSupportedValueInfo} for the global area ID (0) is not {@code null}:
+ * {@code HasSupportedValueInfo.hasSupportedValuesList} must be {@code true}
+ * unless all states of both LowSpeedAutomaticEmergencyBrakingState (including OTHER, which is
+ * not recommended) and ErrorState are supported.
+ * At boot, the supported values list is the same as supportedEnumValues.
+ *
* @change_mode VehiclePropertyChangeMode.ON_CHANGE
* @access VehiclePropertyAccess.READ
* @data_enum LowSpeedAutomaticEmergencyBrakingState