Merge "Loose startNetworkScan cases"
diff --git a/radio/1.0/vts/functional/radio_hidl_hal_icc.cpp b/radio/1.0/vts/functional/radio_hidl_hal_icc.cpp
index 308a882..5042c07 100644
--- a/radio/1.0/vts/functional/radio_hidl_hal_icc.cpp
+++ b/radio/1.0/vts/functional/radio_hidl_hal_icc.cpp
@@ -44,7 +44,9 @@
EXPECT_EQ(std::cv_status::no_timeout, wait());
EXPECT_EQ(serial, radioRsp->rspInfo.serial);
EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp->rspInfo.type);
- EXPECT_EQ(RadioError::PASSWORD_INCORRECT, radioRsp->rspInfo.error);
+ ASSERT_TRUE(CheckAnyOfErrors(
+ radioRsp->rspInfo.error,
+ {RadioError::PASSWORD_INCORRECT, RadioError::REQUEST_NOT_SUPPORTED}));
}
}
}
@@ -90,8 +92,10 @@
EXPECT_EQ(std::cv_status::no_timeout, wait());
EXPECT_EQ(serial, radioRsp->rspInfo.serial);
EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp->rspInfo.type);
- ASSERT_TRUE(CheckAnyOfErrors(radioRsp->rspInfo.error,
- {RadioError::PASSWORD_INCORRECT, RadioError::SIM_PUK2}));
+ ASSERT_TRUE(
+ CheckAnyOfErrors(radioRsp->rspInfo.error,
+ {RadioError::PASSWORD_INCORRECT, RadioError::REQUEST_NOT_SUPPORTED,
+ RadioError::SIM_PUK2}));
}
}
}
diff --git a/radio/1.0/vts/functional/radio_hidl_hal_misc.cpp b/radio/1.0/vts/functional/radio_hidl_hal_misc.cpp
index bc03cf1..10d45b6 100644
--- a/radio/1.0/vts/functional/radio_hidl_hal_misc.cpp
+++ b/radio/1.0/vts/functional/radio_hidl_hal_misc.cpp
@@ -778,20 +778,27 @@
{RadioError::NONE, RadioError::REQUEST_NOT_SUPPORTED}));
}
- /* Setting to carrier restriction needs some time */
- updateSimCardStatus();
- auto startTime = std::chrono::system_clock::now();
- while (cardStatus.cardState != CardState::RESTRICTED &&
- std::chrono::duration_cast<chrono::seconds>(std::chrono::system_clock::now() - startTime)
- .count() < 10) {
- /* Set 2 seconds as interval to check card status */
- sleep(2);
+ if (radioRsp->rspInfo.error == RadioError::NONE) {
+ /* Setting to carrier restriction needs some time */
updateSimCardStatus();
+ auto startTime = std::chrono::system_clock::now();
+ while (cardStatus.cardState != CardState::RESTRICTED &&
+ std::chrono::duration_cast<chrono::seconds>(std::chrono::system_clock::now() -
+ startTime)
+ .count() < 10) {
+ /* Set 2 seconds as interval to check card status */
+ sleep(2);
+ updateSimCardStatus();
+ }
+ EXPECT_EQ(CardState::RESTRICTED, cardStatus.cardState);
}
- EXPECT_EQ(CardState::RESTRICTED, cardStatus.cardState);
sleep(10);
- /* Reset back to no carrier restriction */
+ /**
+ * Another test case of the API to cover to allow carrier.
+ * If the API is supported, this is also used to reset to no carrier restriction
+ * status for cardStatus.
+ */
memset(&carriers, 0, sizeof(carriers));
carriers.allowedCarriers.resize(0);
carriers.excludedCarriers.resize(0);
@@ -807,18 +814,21 @@
{RadioError::NONE, RadioError::REQUEST_NOT_SUPPORTED}));
}
- /* Resetting back to no carrier restriction needs some time */
- updateSimCardStatus();
- startTime = std::chrono::system_clock::now();
- while (cardStatus.cardState == CardState::RESTRICTED &&
- std::chrono::duration_cast<chrono::seconds>(std::chrono::system_clock::now() - startTime)
- .count() < 10) {
- /* Set 2 seconds as interval to check card status */
- sleep(2);
+ if (radioRsp->rspInfo.error == RadioError::NONE) {
+ /* Resetting back to no carrier restriction needs some time */
updateSimCardStatus();
+ auto startTime = std::chrono::system_clock::now();
+ while (cardStatus.cardState == CardState::RESTRICTED &&
+ std::chrono::duration_cast<chrono::seconds>(std::chrono::system_clock::now() -
+ startTime)
+ .count() < 10) {
+ /* Set 2 seconds as interval to check card status */
+ sleep(2);
+ updateSimCardStatus();
+ }
+ EXPECT_NE(CardState::RESTRICTED, cardStatus.cardState);
+ sleep(10);
}
- EXPECT_NE(CardState::RESTRICTED, cardStatus.cardState);
- sleep(10);
}
/*
diff --git a/radio/1.1/vts/functional/radio_hidl_hal_api.cpp b/radio/1.1/vts/functional/radio_hidl_hal_api.cpp
index 90077dc..40759a6 100644
--- a/radio/1.1/vts/functional/radio_hidl_hal_api.cpp
+++ b/radio/1.1/vts/functional/radio_hidl_hal_api.cpp
@@ -43,7 +43,9 @@
sleep(2);
updateSimCardStatus();
}
- EXPECT_EQ(CardState::ABSENT, cardStatus.cardState);
+ if (radioRsp_v1_1->rspInfo.error == RadioError::NONE) {
+ EXPECT_EQ(CardState::ABSENT, cardStatus.cardState);
+ }
/* Test setSimCardPower power up */
serial = GetRandomSerialNumber();
@@ -59,7 +61,8 @@
* If the sim card status for the testing environment is PRESENT,
* verify if sim status is reset back.
*/
- if (cardStateForTest == CardState::PRESENT) {
+ if (cardStateForTest == CardState::PRESENT &&
+ radioRsp_v1_1->rspInfo.error == RadioError::NONE) {
/* Wait some time for resetting back to sim power on and then verify it */
updateSimCardStatus();
startTime = std::chrono::system_clock::now();
diff --git a/radio/1.3/Android.bp b/radio/1.3/Android.bp
new file mode 100644
index 0000000..3c7b5c5
--- /dev/null
+++ b/radio/1.3/Android.bp
@@ -0,0 +1,24 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+ name: "android.hardware.radio@1.3",
+ root: "android.hardware",
+ vndk: {
+ enabled: true,
+ },
+ srcs: [
+ "types.hal",
+ "IRadio.hal",
+ ],
+ interfaces: [
+ "android.hardware.radio@1.0",
+ "android.hardware.radio@1.1",
+ "android.hardware.radio@1.2",
+ "android.hidl.base@1.0",
+ ],
+ types: [
+ "AccessNetwork",
+ ],
+ gen_java: true,
+}
+
diff --git a/radio/1.3/IRadio.hal b/radio/1.3/IRadio.hal
new file mode 100644
index 0000000..16e6684
--- /dev/null
+++ b/radio/1.3/IRadio.hal
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.3;
+
+import @1.0::DataProfileInfo;
+import @1.2::DataRequestReason;
+import @1.2::IRadio;
+import @1.3::AccessNetwork;
+
+/**
+ * This interface is used by telephony and telecom to talk to cellular radio.
+ * All the functions have minimum one parameter:
+ * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
+ * duration of a method call. If clients provide colliding serials (including passing the same
+ * serial to different methods), multiple responses (one for each method call) must still be served.
+ * setResponseFunctions must work with @1.1::IRadioResponse and @1.1::IRadioIndication.
+ */
+interface IRadio extends @1.2::IRadio {
+ /**
+ * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
+ * the data connection must be added to data calls and a unsolDataCallListChanged() must be
+ * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
+ * lost due to many factors, including deactivateDataCall() being issued, the radio powered
+ * off, reception lost or even transient factors like congestion. This data call list is
+ * returned by getDataCallList() and dataCallListChanged().
+ *
+ * The Radio is expected to:
+ * - Create one data call context.
+ * - Create and configure a dedicated interface for the context.
+ * - The interface must be point to point.
+ * - The interface is configured with one or more addresses and is capable of sending and
+ * receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128
+ * for IPv6.
+ * - Must not modify routing configuration related to this interface; routing management is
+ * exclusively within the purview of the Android OS.
+ * - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
+ * in the response of getDataRegistrationState.
+ *
+ * @param serial Serial number of request.
+ * @param accessNetwork The access network to setup the data call. If the data connection cannot
+ * be established on the specified access network, the setup request must be failed.
+ * @param dataProfileInfo Data profile info.
+ * @param modemCognitive Indicates that the requested profile has previously been provided via
+ * setDataProfile().
+ * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
+ * @param isRoaming Indicates whether or not the framework has requested this setupDataCall for
+ * a roaming network. The 'protocol' parameter in the old RIL API must be filled
+ * accordingly based on the roaming condition. Note this is for backward compatibility with
+ * the old radio modem. The modem must not use this param for any other reason.
+ * @param reason The request reason. Must be DataRequestReason.NORMAL or
+ * DataRequestReason.HANDOVER.
+ * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
+ * addresses of the existing data connection. The format is IP address with optional "/"
+ * prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
+ * "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
+ * the prefix length is absent, then the addresses are assumed to be point to point with
+ * IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored
+ * unless reason is DataRequestReason.HANDOVER.
+ * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
+ * addresses of the existing data connection. The format is defined in RFC-4291 section
+ * 2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless
+ * reason is DataRequestReason.HANDOVER.
+ *
+ * Response function is IRadioResponse.setupDataCallResponse()
+ *
+ * Note this API is same as 1.2 version except using the 1.3 AccessNetwork as the input param.
+ */
+ oneway setupDataCall_1_3(int32_t serial, AccessNetwork accessNetwork,
+ DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed,
+ bool isRoaming, DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+};
diff --git a/radio/1.3/types.hal b/radio/1.3/types.hal
new file mode 100644
index 0000000..b80aabd
--- /dev/null
+++ b/radio/1.3/types.hal
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.3;
+
+import @1.2::AccessNetwork;
+
+enum AccessNetwork : @1.2::AccessNetwork {
+ /**
+ * Unknown access network
+ */
+ UNKNOWN = 0,
+};