diff --git a/radio/1.0/vts/functional/radio_hidl_hal_icc.cpp b/radio/1.0/vts/functional/radio_hidl_hal_icc.cpp
index 308a882..5042c07 100644
--- a/radio/1.0/vts/functional/radio_hidl_hal_icc.cpp
+++ b/radio/1.0/vts/functional/radio_hidl_hal_icc.cpp
@@ -44,7 +44,9 @@
             EXPECT_EQ(std::cv_status::no_timeout, wait());
             EXPECT_EQ(serial, radioRsp->rspInfo.serial);
             EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp->rspInfo.type);
-            EXPECT_EQ(RadioError::PASSWORD_INCORRECT, radioRsp->rspInfo.error);
+            ASSERT_TRUE(CheckAnyOfErrors(
+                radioRsp->rspInfo.error,
+                {RadioError::PASSWORD_INCORRECT, RadioError::REQUEST_NOT_SUPPORTED}));
         }
     }
 }
@@ -90,8 +92,10 @@
             EXPECT_EQ(std::cv_status::no_timeout, wait());
             EXPECT_EQ(serial, radioRsp->rspInfo.serial);
             EXPECT_EQ(RadioResponseType::SOLICITED, radioRsp->rspInfo.type);
-            ASSERT_TRUE(CheckAnyOfErrors(radioRsp->rspInfo.error,
-                                         {RadioError::PASSWORD_INCORRECT, RadioError::SIM_PUK2}));
+            ASSERT_TRUE(
+                CheckAnyOfErrors(radioRsp->rspInfo.error,
+                                 {RadioError::PASSWORD_INCORRECT, RadioError::REQUEST_NOT_SUPPORTED,
+                                  RadioError::SIM_PUK2}));
         }
     }
 }
diff --git a/radio/1.0/vts/functional/radio_hidl_hal_misc.cpp b/radio/1.0/vts/functional/radio_hidl_hal_misc.cpp
index bc03cf1..10d45b6 100644
--- a/radio/1.0/vts/functional/radio_hidl_hal_misc.cpp
+++ b/radio/1.0/vts/functional/radio_hidl_hal_misc.cpp
@@ -778,20 +778,27 @@
                                      {RadioError::NONE, RadioError::REQUEST_NOT_SUPPORTED}));
     }
 
-    /* Setting to carrier restriction needs some time */
-    updateSimCardStatus();
-    auto startTime = std::chrono::system_clock::now();
-    while (cardStatus.cardState != CardState::RESTRICTED &&
-           std::chrono::duration_cast<chrono::seconds>(std::chrono::system_clock::now() - startTime)
-                   .count() < 10) {
-        /* Set 2 seconds as interval to check card status */
-        sleep(2);
+    if (radioRsp->rspInfo.error == RadioError::NONE) {
+        /* Setting to carrier restriction needs some time */
         updateSimCardStatus();
+        auto startTime = std::chrono::system_clock::now();
+        while (cardStatus.cardState != CardState::RESTRICTED &&
+               std::chrono::duration_cast<chrono::seconds>(std::chrono::system_clock::now() -
+                                                           startTime)
+                       .count() < 10) {
+            /* Set 2 seconds as interval to check card status */
+            sleep(2);
+            updateSimCardStatus();
+        }
+        EXPECT_EQ(CardState::RESTRICTED, cardStatus.cardState);
     }
-    EXPECT_EQ(CardState::RESTRICTED, cardStatus.cardState);
     sleep(10);
 
-    /* Reset back to no carrier restriction */
+    /** 
+     * Another test case of the API to cover to allow carrier.
+     * If the API is supported, this is also used to reset to no carrier restriction
+     * status for cardStatus. 
+     */
     memset(&carriers, 0, sizeof(carriers));
     carriers.allowedCarriers.resize(0);
     carriers.excludedCarriers.resize(0);
@@ -807,18 +814,21 @@
                                      {RadioError::NONE, RadioError::REQUEST_NOT_SUPPORTED}));
     }
 
-    /* Resetting back to no carrier restriction needs some time */
-    updateSimCardStatus();
-    startTime = std::chrono::system_clock::now();
-    while (cardStatus.cardState == CardState::RESTRICTED &&
-           std::chrono::duration_cast<chrono::seconds>(std::chrono::system_clock::now() - startTime)
-                   .count() < 10) {
-        /* Set 2 seconds as interval to check card status */
-        sleep(2);
+    if (radioRsp->rspInfo.error == RadioError::NONE) {
+        /* Resetting back to no carrier restriction needs some time */
         updateSimCardStatus();
+        auto startTime = std::chrono::system_clock::now();
+        while (cardStatus.cardState == CardState::RESTRICTED &&
+               std::chrono::duration_cast<chrono::seconds>(std::chrono::system_clock::now() -
+                                                           startTime)
+                       .count() < 10) {
+            /* Set 2 seconds as interval to check card status */
+            sleep(2);
+            updateSimCardStatus();
+        }
+        EXPECT_NE(CardState::RESTRICTED, cardStatus.cardState);
+        sleep(10);
     }
-    EXPECT_NE(CardState::RESTRICTED, cardStatus.cardState);
-    sleep(10);
 }
 
 /*
diff --git a/radio/1.1/vts/functional/radio_hidl_hal_api.cpp b/radio/1.1/vts/functional/radio_hidl_hal_api.cpp
index 90077dc..40759a6 100644
--- a/radio/1.1/vts/functional/radio_hidl_hal_api.cpp
+++ b/radio/1.1/vts/functional/radio_hidl_hal_api.cpp
@@ -43,7 +43,9 @@
         sleep(2);
         updateSimCardStatus();
     }
-    EXPECT_EQ(CardState::ABSENT, cardStatus.cardState);
+    if (radioRsp_v1_1->rspInfo.error == RadioError::NONE) {
+        EXPECT_EQ(CardState::ABSENT, cardStatus.cardState);
+    }
 
     /* Test setSimCardPower power up */
     serial = GetRandomSerialNumber();
@@ -59,7 +61,8 @@
      * If the sim card status for the testing environment is PRESENT,
      * verify if sim status is reset back.
      */
-    if (cardStateForTest == CardState::PRESENT) {
+    if (cardStateForTest == CardState::PRESENT &&
+        radioRsp_v1_1->rspInfo.error == RadioError::NONE) {
         /* Wait some time for resetting back to sim power on and then verify it */
         updateSimCardStatus();
         startTime = std::chrono::system_clock::now();
diff --git a/radio/1.3/Android.bp b/radio/1.3/Android.bp
new file mode 100644
index 0000000..3c7b5c5
--- /dev/null
+++ b/radio/1.3/Android.bp
@@ -0,0 +1,24 @@
+// This file is autogenerated by hidl-gen -Landroidbp.
+
+hidl_interface {
+    name: "android.hardware.radio@1.3",
+    root: "android.hardware",
+    vndk: {
+        enabled: true,
+    },
+    srcs: [
+        "types.hal",
+        "IRadio.hal",
+    ],
+    interfaces: [
+        "android.hardware.radio@1.0",
+        "android.hardware.radio@1.1",
+        "android.hardware.radio@1.2",
+        "android.hidl.base@1.0",
+    ],
+    types: [
+        "AccessNetwork",
+    ],
+    gen_java: true,
+}
+
diff --git a/radio/1.3/IRadio.hal b/radio/1.3/IRadio.hal
new file mode 100644
index 0000000..16e6684
--- /dev/null
+++ b/radio/1.3/IRadio.hal
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.3;
+
+import @1.0::DataProfileInfo;
+import @1.2::DataRequestReason;
+import @1.2::IRadio;
+import @1.3::AccessNetwork;
+
+/**
+ * This interface is used by telephony and telecom to talk to cellular radio.
+ * All the functions have minimum one parameter:
+ * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
+ * duration of a method call. If clients provide colliding serials (including passing the same
+ * serial to different methods), multiple responses (one for each method call) must still be served.
+ * setResponseFunctions must work with @1.1::IRadioResponse and @1.1::IRadioIndication.
+ */
+interface IRadio extends @1.2::IRadio {
+    /**
+     * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
+     * the data connection must be added to data calls and a unsolDataCallListChanged() must be
+     * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
+     * lost due to many factors, including deactivateDataCall() being issued, the radio powered
+     * off, reception lost or even transient factors like congestion. This data call list is
+     * returned by getDataCallList() and dataCallListChanged().
+     *
+     * The Radio is expected to:
+     *   - Create one data call context.
+     *   - Create and configure a dedicated interface for the context.
+     *   - The interface must be point to point.
+     *   - The interface is configured with one or more addresses and is capable of sending and
+     *     receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128
+     *     for IPv6.
+     *   - Must not modify routing configuration related to this interface; routing management is
+     *     exclusively within the purview of the Android OS.
+     *   - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
+     *     in the response of getDataRegistrationState.
+     *
+     * @param serial Serial number of request.
+     * @param accessNetwork The access network to setup the data call. If the data connection cannot
+     *     be established on the specified access network, the setup request must be failed.
+     * @param dataProfileInfo Data profile info.
+     * @param modemCognitive Indicates that the requested profile has previously been provided via
+     *     setDataProfile().
+     * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
+     * @param isRoaming Indicates whether or not the framework has requested this setupDataCall for
+     *     a roaming network. The 'protocol' parameter in the old RIL API must be filled
+     *     accordingly based on the roaming condition. Note this is for backward compatibility with
+     *     the old radio modem. The modem must not use this param for any other reason.
+     * @param reason The request reason. Must be DataRequestReason.NORMAL or
+     *     DataRequestReason.HANDOVER.
+     * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
+     *     addresses of the existing data connection. The format is IP address with optional "/"
+     *     prefix length (The format is defined in RFC-4291 section 2.3). For example, "192.0.1.3",
+     *     "192.0.1.11/16", or "2001:db8::1/64". Typically one IPv4 or one IPv6 or one of each. If
+     *     the prefix length is absent, then the addresses are assumed to be point to point with
+     *     IPv4 with prefix length 32 or IPv6 with prefix length 128. This parameter must be ignored
+     *     unless reason is DataRequestReason.HANDOVER.
+     * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
+     *     addresses of the existing data connection. The format is defined in RFC-4291 section
+     *     2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless
+     *     reason is DataRequestReason.HANDOVER.
+     *
+     * Response function is IRadioResponse.setupDataCallResponse()
+     *
+     * Note this API is same as 1.2 version except using the 1.3 AccessNetwork as the input param.
+     */
+    oneway setupDataCall_1_3(int32_t serial, AccessNetwork accessNetwork,
+            DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed,
+            bool isRoaming, DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+};
diff --git a/radio/1.3/types.hal b/radio/1.3/types.hal
new file mode 100644
index 0000000..b80aabd
--- /dev/null
+++ b/radio/1.3/types.hal
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.hardware.radio@1.3;
+
+import @1.2::AccessNetwork;
+
+enum AccessNetwork : @1.2::AccessNetwork {
+    /**
+     * Unknown access network
+     */
+    UNKNOWN = 0,
+};