services/surfaceflinger/SurfaceFlinger.cpp

/*
 * Copyright (C) 2007 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#define ATRACE_TAG ATRACE_TAG_GRAPHICS

#include <stdint.h>
#include <sys/types.h>
#include <errno.h>
#include <math.h>
#include <dlfcn.h>

#include <EGL/egl.h>
#include <GLES/gl.h>

#include <cutils/log.h>
#include <cutils/properties.h>

#include <binder/IPCThreadState.h>
#include <binder/IServiceManager.h>
#include <binder/MemoryHeapBase.h>
#include <binder/PermissionCache.h>

#include <ui/DisplayInfo.h>

#include <gui/BitTube.h>
#include <gui/BufferQueue.h>
#include <gui/GuiConfig.h>
#include <gui/IDisplayEventConnection.h>
#include <gui/SurfaceTextureClient.h>

#include <ui/GraphicBufferAllocator.h>
#include <ui/PixelFormat.h>
#include <ui/UiConfig.h>

#include <utils/misc.h>
#include <utils/String8.h>
#include <utils/String16.h>
#include <utils/StopWatch.h>
#include <utils/Trace.h>

#include <private/android_filesystem_config.h>

#include "clz.h"
#include "DdmConnection.h"
#include "DisplayDevice.h"
#include "Client.h"
#include "EventThread.h"
#include "GLExtensions.h"
#include "Layer.h"
#include "LayerDim.h"
#include "LayerScreenshot.h"
#include "SurfaceFlinger.h"

#include "DisplayHardware/FramebufferSurface.h"
#include "DisplayHardware/GraphicBufferAlloc.h"
#include "DisplayHardware/HWComposer.h"


#define EGL_VERSION_HW_ANDROID  0x3143

#define DISPLAY_COUNT       1

namespace android {
// ---------------------------------------------------------------------------

const String16 sHardwareTest("android.permission.HARDWARE_TEST");
const String16 sAccessSurfaceFlinger("android.permission.ACCESS_SURFACE_FLINGER");
const String16 sReadFramebuffer("android.permission.READ_FRAME_BUFFER");
const String16 sDump("android.permission.DUMP");

// ---------------------------------------------------------------------------

SurfaceFlinger::SurfaceFlinger()
    :   BnSurfaceComposer(), Thread(false),
        mTransactionFlags(0),
        mTransactionPending(false),
        mAnimTransactionPending(false),
        mLayersRemoved(false),
        mRepaintEverything(0),
        mBootTime(systemTime()),
        mVisibleRegionsDirty(false),
        mHwWorkListDirty(false),
        mDebugRegion(0),
        mDebugDDMS(0),
        mDebugDisableHWC(0),
        mDebugDisableTransformHint(0),
        mDebugInSwapBuffers(0),
        mLastSwapBufferTime(0),
        mDebugInTransaction(0),
        mLastTransactionTime(0),
        mBootFinished(false)
{
    ALOGI("SurfaceFlinger is starting");

    // debugging stuff...
    char value[PROPERTY_VALUE_MAX];

    property_get("debug.sf.showupdates", value, "0");
    mDebugRegion = atoi(value);

    property_get("debug.sf.ddms", value, "0");
    mDebugDDMS = atoi(value);
    if (mDebugDDMS) {
        if (!startDdmConnection()) {
            // start failed, and DDMS debugging not enabled
            mDebugDDMS = 0;
        }
    }
    ALOGI_IF(mDebugRegion, "showupdates enabled");
    ALOGI_IF(mDebugDDMS, "DDMS debugging enabled");
}

void SurfaceFlinger::onFirstRef()
{
    mEventQueue.init(this);

    run("SurfaceFlinger", PRIORITY_URGENT_DISPLAY);

    // Wait for the main thread to be done with its initialization
    mReadyToRunBarrier.wait();
}


SurfaceFlinger::~SurfaceFlinger()
{
    EGLDisplay display = eglGetDisplay(EGL_DEFAULT_DISPLAY);
    eglMakeCurrent(display, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT);
    eglTerminate(display);
}

void SurfaceFlinger::binderDied(const wp<IBinder>& who)
{
    // the window manager died on us. prepare its eulogy.

    // restore initial conditions (default device unblank, etc)
    initializeDisplays();

    // restart the boot-animation
    startBootAnim();
}

sp<ISurfaceComposerClient> SurfaceFlinger::createConnection()
{
    sp<ISurfaceComposerClient> bclient;
    sp<Client> client(new Client(this));
    status_t err = client->initCheck();
    if (err == NO_ERROR) {
        bclient = client;
    }
    return bclient;
}

sp<IBinder> SurfaceFlinger::createDisplay(const String8& displayName,
        bool secure)
{
    class DisplayToken : public BBinder {
        sp<SurfaceFlinger> flinger;
        virtual ~DisplayToken() {
             // no more references, this display must be terminated
             Mutex::Autolock _l(flinger->mStateLock);
             flinger->mCurrentState.displays.removeItem(this);
             flinger->setTransactionFlags(eDisplayTransactionNeeded);
         }
     public:
        DisplayToken(const sp<SurfaceFlinger>& flinger)
            : flinger(flinger) {
        }
    };

    sp<BBinder> token = new DisplayToken(this);

    Mutex::Autolock _l(mStateLock);
    DisplayDeviceState info(DisplayDevice::DISPLAY_VIRTUAL);
    info.displayName = displayName;
    info.isSecure = secure;
    mCurrentState.displays.add(token, info);

    return token;
}

void SurfaceFlinger::createBuiltinDisplayLocked(DisplayDevice::DisplayType type) {
    ALOGW_IF(mBuiltinDisplays[type],
            "Overwriting display token for display type %d", type);
    mBuiltinDisplays[type] = new BBinder();
    DisplayDeviceState info(type);
    // All non-virtual displays are currently considered secure.
    info.isSecure = true;
    mCurrentState.displays.add(mBuiltinDisplays[type], info);
}

sp<IBinder> SurfaceFlinger::getBuiltInDisplay(int32_t id) {
    if (uint32_t(id) >= DisplayDevice::NUM_DISPLAY_TYPES) {
        ALOGE("getDefaultDisplay: id=%d is not a valid default display id", id);
        return NULL;
    }
    return mBuiltinDisplays[id];
}

sp<IGraphicBufferAlloc> SurfaceFlinger::createGraphicBufferAlloc()
{
    sp<GraphicBufferAlloc> gba(new GraphicBufferAlloc());
    return gba;
}

void SurfaceFlinger::bootFinished()
{
    const nsecs_t now = systemTime();
    const nsecs_t duration = now - mBootTime;
    ALOGI("Boot is finished (%ld ms)", long(ns2ms(duration)) );
    mBootFinished = true;

    // wait patiently for the window manager death
    const String16 name("window");
    sp<IBinder> window(defaultServiceManager()->getService(name));
    if (window != 0) {
        window->linkToDeath(static_cast<IBinder::DeathRecipient*>(this));
    }

    // stop boot animation
    // formerly we would just kill the process, but we now ask it to exit so it
    // can choose where to stop the animation.
    property_set("service.bootanim.exit", "1");
}

void SurfaceFlinger::deleteTextureAsync(GLuint texture) {
    class MessageDestroyGLTexture : public MessageBase {
        GLuint texture;
    public:
        MessageDestroyGLTexture(GLuint texture)
            : texture(texture) {
        }
        virtual bool handler() {
            glDeleteTextures(1, &texture);
            return true;
        }
    };
    postMessageAsync(new MessageDestroyGLTexture(texture));
}

status_t SurfaceFlinger::selectConfigForAttribute(
        EGLDisplay dpy,
        EGLint const* attrs,
        EGLint attribute, EGLint wanted,
        EGLConfig* outConfig)
{
    EGLConfig config = NULL;
    EGLint numConfigs = -1, n=0;
    eglGetConfigs(dpy, NULL, 0, &numConfigs);
    EGLConfig* const configs = new EGLConfig[numConfigs];
    eglChooseConfig(dpy, attrs, configs, numConfigs, &n);

    if (n) {
        if (attribute != EGL_NONE) {
            for (int i=0 ; i<n ; i++) {
                EGLint value = 0;
                eglGetConfigAttrib(dpy, configs[i], attribute, &value);
                if (wanted == value) {
                    *outConfig = configs[i];
                    delete [] configs;
                    return NO_ERROR;
                }
            }
        } else {
            // just pick the first one
            *outConfig = configs[0];
            delete [] configs;
            return NO_ERROR;
        }
    }
    delete [] configs;
    return NAME_NOT_FOUND;
}

class EGLAttributeVector {
    struct Attribute;
    class Adder;
    friend class Adder;
    KeyedVector<Attribute, EGLint> mList;
    struct Attribute {
        Attribute() {};
        Attribute(EGLint v) : v(v) { }
        EGLint v;
        bool operator < (const Attribute& other) const {
            // this places EGL_NONE at the end
            EGLint lhs(v);
            EGLint rhs(other.v);
            if (lhs == EGL_NONE) lhs = 0x7FFFFFFF;
            if (rhs == EGL_NONE) rhs = 0x7FFFFFFF;
            return lhs < rhs;
        }
    };
    class Adder {
        friend class EGLAttributeVector;
        EGLAttributeVector& v;
        EGLint attribute;
        Adder(EGLAttributeVector& v, EGLint attribute)
            : v(v), attribute(attribute) {
        }
    public:
        void operator = (EGLint value) {
            if (attribute != EGL_NONE) {
                v.mList.add(attribute, value);
            }
        }
        operator EGLint () const { return v.mList[attribute]; }
    };
public:
    EGLAttributeVector() {
        mList.add(EGL_NONE, EGL_NONE);
    }
    void remove(EGLint attribute) {
        if (attribute != EGL_NONE) {
            mList.removeItem(attribute);
        }
    }
    Adder operator [] (EGLint attribute) {
        return Adder(*this, attribute);
    }
    EGLint operator [] (EGLint attribute) const {
       return mList[attribute];
    }
    // cast-operator to (EGLint const*)
    operator EGLint const* () const { return &mList.keyAt(0).v; }
};

EGLConfig SurfaceFlinger::selectEGLConfig(EGLDisplay display, EGLint nativeVisualId) {
    // select our EGLConfig. It must support EGL_RECORDABLE_ANDROID if
    // it is to be used with WIFI displays
    EGLConfig config;
    EGLint dummy;
    status_t err;

    EGLAttributeVector attribs;
    attribs[EGL_SURFACE_TYPE]               = EGL_WINDOW_BIT;
    attribs[EGL_RECORDABLE_ANDROID]         = EGL_TRUE;
    attribs[EGL_FRAMEBUFFER_TARGET_ANDROID] = EGL_TRUE;
    attribs[EGL_RED_SIZE]                   = 8;
    attribs[EGL_GREEN_SIZE]                 = 8;
    attribs[EGL_BLUE_SIZE]                  = 8;

    err = selectConfigForAttribute(display, attribs, EGL_NONE, EGL_NONE, &config);
    if (!err)
        goto success;

    // maybe we failed because of EGL_FRAMEBUFFER_TARGET_ANDROID
    ALOGW("no suitable EGLConfig found, trying without EGL_FRAMEBUFFER_TARGET_ANDROID");
    attribs.remove(EGL_FRAMEBUFFER_TARGET_ANDROID);
    err = selectConfigForAttribute(display, attribs,
            EGL_NATIVE_VISUAL_ID, nativeVisualId, &config);
    if (!err)
        goto success;

    // maybe we failed because of EGL_RECORDABLE_ANDROID
    ALOGW("no suitable EGLConfig found, trying without EGL_RECORDABLE_ANDROID");
    attribs.remove(EGL_RECORDABLE_ANDROID);
    err = selectConfigForAttribute(display, attribs,
            EGL_NATIVE_VISUAL_ID, nativeVisualId, &config);
    if (!err)
        goto success;

    // allow less than 24-bit color; the non-gpu-accelerated emulator only
    // supports 16-bit color
    ALOGW("no suitable EGLConfig found, trying with 16-bit color allowed");
    attribs.remove(EGL_RED_SIZE);
    attribs.remove(EGL_GREEN_SIZE);
    attribs.remove(EGL_BLUE_SIZE);
    err = selectConfigForAttribute(display, attribs,
            EGL_NATIVE_VISUAL_ID, nativeVisualId, &config);
    if (!err)
        goto success;

    // this EGL is too lame for Android
    ALOGE("no suitable EGLConfig found, giving up");

    return 0;

success:
    if (eglGetConfigAttrib(display, config, EGL_CONFIG_CAVEAT, &dummy))
        ALOGW_IF(dummy == EGL_SLOW_CONFIG, "EGL_SLOW_CONFIG selected!");
    return config;
}

EGLContext SurfaceFlinger::createGLContext(EGLDisplay display, EGLConfig config) {
    // Also create our EGLContext
    EGLint contextAttributes[] = {
#ifdef EGL_IMG_context_priority
#ifdef HAS_CONTEXT_PRIORITY
#warning "using EGL_IMG_context_priority"
            EGL_CONTEXT_PRIORITY_LEVEL_IMG, EGL_CONTEXT_PRIORITY_HIGH_IMG,
#endif
#endif
            EGL_NONE, EGL_NONE
    };
    EGLContext ctxt = eglCreateContext(display, config, NULL, contextAttributes);
    ALOGE_IF(ctxt==EGL_NO_CONTEXT, "EGLContext creation failed");
    return ctxt;
}

void SurfaceFlinger::initializeGL(EGLDisplay display) {
    GLExtensions& extensions(GLExtensions::getInstance());
    extensions.initWithGLStrings(
            glGetString(GL_VENDOR),
            glGetString(GL_RENDERER),
            glGetString(GL_VERSION),
            glGetString(GL_EXTENSIONS),
            eglQueryString(display, EGL_VENDOR),
            eglQueryString(display, EGL_VERSION),
            eglQueryString(display, EGL_EXTENSIONS));

    glGetIntegerv(GL_MAX_TEXTURE_SIZE, &mMaxTextureSize);
    glGetIntegerv(GL_MAX_VIEWPORT_DIMS, mMaxViewportDims);

    glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
    glPixelStorei(GL_PACK_ALIGNMENT, 4);
    glEnableClientState(GL_VERTEX_ARRAY);
    glShadeModel(GL_FLAT);
    glDisable(GL_DITHER);
    glDisable(GL_CULL_FACE);

    struct pack565 {
        inline uint16_t operator() (int r, int g, int b) const {
            return (r<<11)|(g<<5)|b;
        }
    } pack565;

    const uint16_t protTexData[] = { pack565(0x03, 0x03, 0x03) };
    glGenTextures(1, &mProtectedTexName);
    glBindTexture(GL_TEXTURE_2D, mProtectedTexName);
    glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
    glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
    glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
    glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);
    glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, 1, 1, 0,
            GL_RGB, GL_UNSIGNED_SHORT_5_6_5, protTexData);

    // print some debugging info
    EGLint r,g,b,a;
    eglGetConfigAttrib(display, mEGLConfig, EGL_RED_SIZE,   &r);
    eglGetConfigAttrib(display, mEGLConfig, EGL_GREEN_SIZE, &g);
    eglGetConfigAttrib(display, mEGLConfig, EGL_BLUE_SIZE,  &b);
    eglGetConfigAttrib(display, mEGLConfig, EGL_ALPHA_SIZE, &a);
    ALOGI("EGL informations:");
    ALOGI("vendor    : %s", extensions.getEglVendor());
    ALOGI("version   : %s", extensions.getEglVersion());
    ALOGI("extensions: %s", extensions.getEglExtension());
    ALOGI("Client API: %s", eglQueryString(display, EGL_CLIENT_APIS)?:"Not Supported");
    ALOGI("EGLSurface: %d-%d-%d-%d, config=%p", r, g, b, a, mEGLConfig);
    ALOGI("OpenGL ES informations:");
    ALOGI("vendor    : %s", extensions.getVendor());
    ALOGI("renderer  : %s", extensions.getRenderer());
    ALOGI("version   : %s", extensions.getVersion());
    ALOGI("extensions: %s", extensions.getExtension());
    ALOGI("GL_MAX_TEXTURE_SIZE = %d", mMaxTextureSize);
    ALOGI("GL_MAX_VIEWPORT_DIMS = %d x %d", mMaxViewportDims[0], mMaxViewportDims[1]);
}

status_t SurfaceFlinger::readyToRun()
{
    ALOGI(  "SurfaceFlinger's main thread ready to run. "
            "Initializing graphics H/W...");

    Mutex::Autolock _l(mStateLock);

    // initialize EGL for the default display
    mEGLDisplay = eglGetDisplay(EGL_DEFAULT_DISPLAY);
    eglInitialize(mEGLDisplay, NULL, NULL);

    // Initialize the H/W composer object.  There may or may not be an
    // actual hardware composer underneath.
    mHwc = new HWComposer(this,
            *static_cast<HWComposer::EventHandler *>(this));

    // initialize the config and context
    EGLint format = mHwc->getVisualID();
    mEGLConfig  = selectEGLConfig(mEGLDisplay, format);
    mEGLContext = createGLContext(mEGLDisplay, mEGLConfig);

    LOG_ALWAYS_FATAL_IF(mEGLContext == EGL_NO_CONTEXT,
            "couldn't create EGLContext");

    // initialize our non-virtual displays
    for (size_t i=0 ; i<DisplayDevice::NUM_DISPLAY_TYPES ; i++) {
        DisplayDevice::DisplayType type((DisplayDevice::DisplayType)i);
        // set-up the displays that are already connected
        if (mHwc->isConnected(i) || type==DisplayDevice::DISPLAY_PRIMARY) {
            // All non-virtual displays are currently considered secure.
            bool isSecure = true;
            createBuiltinDisplayLocked(type);
            wp<IBinder> token = mBuiltinDisplays[i];

            sp<FramebufferSurface> fbs = new FramebufferSurface(*mHwc, i);
            sp<SurfaceTextureClient> stc = new SurfaceTextureClient(
                        static_cast< sp<ISurfaceTexture> >(fbs->getBufferQueue()));
            sp<DisplayDevice> hw = new DisplayDevice(this,
                    type, isSecure, token, stc, fbs, mEGLConfig);
            if (i > DisplayDevice::DISPLAY_PRIMARY) {
                // FIXME: currently we don't get blank/unblank requests
                // for displays other than the main display, so we always
                // assume a connected display is unblanked.
                ALOGD("marking display %d as acquired/unblanked", i);
                hw->acquireScreen();
            }
            mDisplays.add(token, hw);
        }
    }

    //  we need a GL context current in a few places, when initializing
    //  OpenGL ES (see below), or creating a layer,
    //  or when a texture is (asynchronously) destroyed, and for that
    //  we need a valid surface, so it's convenient to use the main display
    //  for that.
    sp<const DisplayDevice> hw(getDefaultDisplayDevice());

    //  initialize OpenGL ES
    DisplayDevice::makeCurrent(mEGLDisplay, hw, mEGLContext);
    initializeGL(mEGLDisplay);

    // start the EventThread
    mEventThread = new EventThread(this);
    mEventQueue.setEventThread(mEventThread);

    // initialize our drawing state
    mDrawingState = mCurrentState;


    // We're now ready to accept clients...
    mReadyToRunBarrier.open();

    // set initial conditions (e.g. unblank default device)
    initializeDisplays();

    // start boot animation
    startBootAnim();

    return NO_ERROR;
}

int32_t SurfaceFlinger::allocateHwcDisplayId(DisplayDevice::DisplayType type) {
    return (uint32_t(type) < DisplayDevice::NUM_DISPLAY_TYPES) ?
            type : mHwc->allocateDisplayId();
}

void SurfaceFlinger::startBootAnim() {
    // start boot animation
    property_set("service.bootanim.exit", "0");
    property_set("ctl.start", "bootanim");
}

uint32_t SurfaceFlinger::getMaxTextureSize() const {
    return mMaxTextureSize;
}

uint32_t SurfaceFlinger::getMaxViewportDims() const {
    return mMaxViewportDims[0] < mMaxViewportDims[1] ?
            mMaxViewportDims[0] : mMaxViewportDims[1];
}

// ----------------------------------------------------------------------------

bool SurfaceFlinger::authenticateSurfaceTexture(
        const sp<ISurfaceTexture>& surfaceTexture) const {
    Mutex::Autolock _l(mStateLock);
    sp<IBinder> surfaceTextureBinder(surfaceTexture->asBinder());

    // Check the visible layer list for the ISurface
    const LayerVector& currentLayers = mCurrentState.layersSortedByZ;
    size_t count = currentLayers.size();
    for (size_t i=0 ; i<count ; i++) {
        const sp<LayerBase>& layer(currentLayers[i]);
        sp<LayerBaseClient> lbc(layer->getLayerBaseClient());
        if (lbc != NULL) {
            wp<IBinder> lbcBinder = lbc->getSurfaceTextureBinder();
            if (lbcBinder == surfaceTextureBinder) {
                return true;
            }
        }
    }

    // Check the layers in the purgatory.  This check is here so that if a
    // SurfaceTexture gets destroyed before all the clients are done using it,
    // the error will not be reported as "surface XYZ is not authenticated", but
    // will instead fail later on when the client tries to use the surface,
    // which should be reported as "surface XYZ returned an -ENODEV".  The
    // purgatorized layers are no less authentic than the visible ones, so this
    // should not cause any harm.
    size_t purgatorySize =  mLayerPurgatory.size();
    for (size_t i=0 ; i<purgatorySize ; i++) {
        const sp<LayerBase>& layer(mLayerPurgatory.itemAt(i));
        sp<LayerBaseClient> lbc(layer->getLayerBaseClient());
        if (lbc != NULL) {
            wp<IBinder> lbcBinder = lbc->getSurfaceTextureBinder();
            if (lbcBinder == surfaceTextureBinder) {
                return true;
            }
        }
    }

    return false;
}

status_t SurfaceFlinger::getDisplayInfo(const sp<IBinder>& display, DisplayInfo* info) {
    int32_t type = NAME_NOT_FOUND;
    for (int i=0 ; i<DisplayDevice::NUM_DISPLAY_TYPES ; i++) {
        if (display == mBuiltinDisplays[i]) {
            type = i;
            break;
        }
    }

    if (type < 0) {
        return type;
    }

    const HWComposer& hwc(getHwComposer());
    float xdpi = hwc.getDpiX(type);
    float ydpi = hwc.getDpiY(type);

    // TODO: Not sure if display density should handled by SF any longer
    class Density {
        static int getDensityFromProperty(char const* propName) {
            char property[PROPERTY_VALUE_MAX];
            int density = 0;
            if (property_get(propName, property, NULL) > 0) {
                density = atoi(property);
            }
            return density;
        }
    public:
        static int getEmuDensity() {
            return getDensityFromProperty("qemu.sf.lcd_density"); }
        static int getBuildDensity()  {
            return getDensityFromProperty("ro.sf.lcd_density"); }
    };

    if (type == DisplayDevice::DISPLAY_PRIMARY) {
        // The density of the device is provided by a build property
        float density = Density::getBuildDensity() / 160.0f;
        if (density == 0) {
            // the build doesn't provide a density -- this is wrong!
            // use xdpi instead
            ALOGE("ro.sf.lcd_density must be defined as a build property");
            density = xdpi / 160.0f;
        }
        if (Density::getEmuDensity()) {
            // if "qemu.sf.lcd_density" is specified, it overrides everything
            xdpi = ydpi = density = Density::getEmuDensity();
            density /= 160.0f;
        }
        info->density = density;

        // TODO: this needs to go away (currently needed only by webkit)
        sp<const DisplayDevice> hw(getDefaultDisplayDevice());
        info->orientation = hw->getOrientation();
        getPixelFormatInfo(hw->getFormat(), &info->pixelFormatInfo);
    } else {
        // TODO: where should this value come from?
        static const int TV_DENSITY = 213;
        info->density = TV_DENSITY / 160.0f;
        info->orientation = 0;
    }

    info->w = hwc.getWidth(type);
    info->h = hwc.getHeight(type);
    info->xdpi = xdpi;
    info->ydpi = ydpi;
    info->fps = float(1e9 / hwc.getRefreshPeriod(type));

    // All non-virtual displays are currently considered secure.
    info->secure = true;

    return NO_ERROR;
}

// ----------------------------------------------------------------------------

sp<IDisplayEventConnection> SurfaceFlinger::createDisplayEventConnection() {
    return mEventThread->createEventConnection();
}

// ----------------------------------------------------------------------------

void SurfaceFlinger::waitForEvent() {
    mEventQueue.waitMessage();
}

void SurfaceFlinger::signalTransaction() {
    mEventQueue.invalidate();
}

void SurfaceFlinger::signalLayerUpdate() {
    mEventQueue.invalidate();
}

void SurfaceFlinger::signalRefresh() {
    mEventQueue.refresh();
}

status_t SurfaceFlinger::postMessageAsync(const sp<MessageBase>& msg,
        nsecs_t reltime, uint32_t flags) {
    return mEventQueue.postMessage(msg, reltime);
}

status_t SurfaceFlinger::postMessageSync(const sp<MessageBase>& msg,
        nsecs_t reltime, uint32_t flags) {
    status_t res = mEventQueue.postMessage(msg, reltime);
    if (res == NO_ERROR) {
        msg->wait();
    }
    return res;
}

bool SurfaceFlinger::threadLoop() {
    waitForEvent();
    return true;
}

void SurfaceFlinger::onVSyncReceived(int type, nsecs_t timestamp) {
    if (mEventThread == NULL) {
        // This is a temporary workaround for b/7145521.  A non-null pointer
        // does not mean EventThread has finished initializing, so this
        // is not a correct fix.
        ALOGW("WARNING: EventThread not started, ignoring vsync");
        return;
    }
    if (uint32_t(type) < DisplayDevice::NUM_DISPLAY_TYPES) {
        // we should only receive DisplayDevice::DisplayType from the vsync callback
        mEventThread->onVSyncReceived(type, timestamp);
    }
}

void SurfaceFlinger::onHotplugReceived(int type, bool connected) {
    if (mEventThread == NULL) {
        // This is a temporary workaround for b/7145521.  A non-null pointer
        // does not mean EventThread has finished initializing, so this
        // is not a correct fix.
        ALOGW("WARNING: EventThread not started, ignoring hotplug");
        return;
    }

    if (uint32_t(type) < DisplayDevice::NUM_DISPLAY_TYPES) {
        Mutex::Autolock _l(mStateLock);
        if (connected) {
            createBuiltinDisplayLocked((DisplayDevice::DisplayType)type);
        } else {
            mCurrentState.displays.removeItem(mBuiltinDisplays[type]);
            mBuiltinDisplays[type].clear();
        }
        setTransactionFlags(eDisplayTransactionNeeded);

        // Defer EventThread notification until SF has updated mDisplays.
    }
}

void SurfaceFlinger::eventControl(int disp, int event, int enabled) {
    getHwComposer().eventControl(disp, event, enabled);
}

void SurfaceFlinger::onMessageReceived(int32_t what) {
    ATRACE_CALL();
    switch (what) {
    case MessageQueue::INVALIDATE:
        handleMessageTransaction();
        handleMessageInvalidate();
        signalRefresh();
        break;
    case MessageQueue::REFRESH:
        handleMessageRefresh();
        break;
    }
}

void SurfaceFlinger::handleMessageTransaction() {
    uint32_t transactionFlags = peekTransactionFlags(eTransactionMask);
    if (transactionFlags) {
        handleTransaction(transactionFlags);
    }
}

void SurfaceFlinger::handleMessageInvalidate() {
    ATRACE_CALL();
    handlePageFlip();
}

void SurfaceFlinger::handleMessageRefresh() {
    ATRACE_CALL();
    preComposition();
    rebuildLayerStacks();
    setUpHWComposer();
    doDebugFlashRegions();
    doComposition();
    postComposition();
}

void SurfaceFlinger::doDebugFlashRegions()
{
    // is debugging enabled
    if (CC_LIKELY(!mDebugRegion))
        return;

    const bool repaintEverything = mRepaintEverything;
    for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
        const sp<DisplayDevice>& hw(mDisplays[dpy]);
        if (hw->canDraw()) {
            // transform the dirty region into this screen's coordinate space
            const Region dirtyRegion(hw->getDirtyRegion(repaintEverything));
            if (!dirtyRegion.isEmpty()) {
                // redraw the whole screen
                doComposeSurfaces(hw, Region(hw->bounds()));

                // and draw the dirty region
                glDisable(GL_TEXTURE_EXTERNAL_OES);
                glDisable(GL_TEXTURE_2D);
                glDisable(GL_BLEND);
                glColor4f(1, 0, 1, 1);
                const int32_t height = hw->getHeight();
                Region::const_iterator it = dirtyRegion.begin();
                Region::const_iterator const end = dirtyRegion.end();
                while (it != end) {
                    const Rect& r = *it++;
                    GLfloat vertices[][2] = {
                            { r.left,  height - r.top },
                            { r.left,  height - r.bottom },
                            { r.right, height - r.bottom },
                            { r.right, height - r.top }
                    };
                    glVertexPointer(2, GL_FLOAT, 0, vertices);
                    glDrawArrays(GL_TRIANGLE_FAN, 0, 4);
                }
                hw->compositionComplete();
                hw->swapBuffers(getHwComposer());
            }
        }
    }

    postFramebuffer();

    if (mDebugRegion > 1) {
        usleep(mDebugRegion * 1000);
    }

    HWComposer& hwc(getHwComposer());
    if (hwc.initCheck() == NO_ERROR) {
        status_t err = hwc.prepare();
        ALOGE_IF(err, "HWComposer::prepare failed (%s)", strerror(-err));
    }
}

void SurfaceFlinger::preComposition()
{
    bool needExtraInvalidate = false;
    const LayerVector& currentLayers(mDrawingState.layersSortedByZ);
    const size_t count = currentLayers.size();
    for (size_t i=0 ; i<count ; i++) {
        if (currentLayers[i]->onPreComposition()) {
            needExtraInvalidate = true;
        }
    }
    if (needExtraInvalidate) {
        signalLayerUpdate();
    }
}

void SurfaceFlinger::postComposition()
{
    const LayerVector& currentLayers(mDrawingState.layersSortedByZ);
    const size_t count = currentLayers.size();
    for (size_t i=0 ; i<count ; i++) {
        currentLayers[i]->onPostComposition();
    }
}

void SurfaceFlinger::rebuildLayerStacks() {
    // rebuild the visible layer list per screen
    if (CC_UNLIKELY(mVisibleRegionsDirty)) {
        ATRACE_CALL();
        mVisibleRegionsDirty = false;
        invalidateHwcGeometry();

        const LayerVector& currentLayers(mDrawingState.layersSortedByZ);
        for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
            Region opaqueRegion;
            Region dirtyRegion;
            Vector< sp<LayerBase> > layersSortedByZ;
            const sp<DisplayDevice>& hw(mDisplays[dpy]);
            const Transform& tr(hw->getTransform());
            const Rect bounds(hw->getBounds());
            if (hw->canDraw()) {
                SurfaceFlinger::computeVisibleRegions(currentLayers,
                        hw->getLayerStack(), dirtyRegion, opaqueRegion);

                const size_t count = currentLayers.size();
                for (size_t i=0 ; i<count ; i++) {
                    const sp<LayerBase>& layer(currentLayers[i]);
                    const Layer::State& s(layer->drawingState());
                    if (s.layerStack == hw->getLayerStack()) {
                        Region drawRegion(tr.transform(
                                layer->visibleNonTransparentRegion));
                        drawRegion.andSelf(bounds);
                        if (!drawRegion.isEmpty()) {
                            layersSortedByZ.add(layer);
                        }
                    }
                }
            }
            hw->setVisibleLayersSortedByZ(layersSortedByZ);
            hw->undefinedRegion.set(bounds);
            hw->undefinedRegion.subtractSelf(tr.transform(opaqueRegion));
            hw->dirtyRegion.orSelf(dirtyRegion);
        }
    }
}

void SurfaceFlinger::setUpHWComposer() {
    HWComposer& hwc(getHwComposer());
    if (hwc.initCheck() == NO_ERROR) {
        // build the h/w work list
        if (CC_UNLIKELY(mHwWorkListDirty)) {
            mHwWorkListDirty = false;
            for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
                sp<const DisplayDevice> hw(mDisplays[dpy]);
                const int32_t id = hw->getHwcDisplayId();
                if (id >= 0) {
                    const Vector< sp<LayerBase> >& currentLayers(
                        hw->getVisibleLayersSortedByZ());
                    const size_t count = currentLayers.size();
                    if (hwc.createWorkList(id, count) == NO_ERROR) {
                        HWComposer::LayerListIterator cur = hwc.begin(id);
                        const HWComposer::LayerListIterator end = hwc.end(id);
                        for (size_t i=0 ; cur!=end && i<count ; ++i, ++cur) {
                            const sp<LayerBase>& layer(currentLayers[i]);
                            layer->setGeometry(hw, *cur);
                            if (mDebugDisableHWC || mDebugRegion) {
                                cur->setSkip(true);
                            }
                        }
                    }
                }
            }
        }

        // set the per-frame data
        for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
            sp<const DisplayDevice> hw(mDisplays[dpy]);
            const int32_t id = hw->getHwcDisplayId();
            if (id >= 0) {
                const Vector< sp<LayerBase> >& currentLayers(
                    hw->getVisibleLayersSortedByZ());
                const size_t count = currentLayers.size();
                HWComposer::LayerListIterator cur = hwc.begin(id);
                const HWComposer::LayerListIterator end = hwc.end(id);
                for (size_t i=0 ; cur!=end && i<count ; ++i, ++cur) {
                    /*
                     * update the per-frame h/w composer data for each layer
                     * and build the transparent region of the FB
                     */
                    const sp<LayerBase>& layer(currentLayers[i]);
                    layer->setPerFrameData(hw, *cur);
                }
            }
        }

        status_t err = hwc.prepare();
        ALOGE_IF(err, "HWComposer::prepare failed (%s)", strerror(-err));
    }
}

void SurfaceFlinger::doComposition() {
    ATRACE_CALL();
    const bool repaintEverything = android_atomic_and(0, &mRepaintEverything);
    for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
        const sp<DisplayDevice>& hw(mDisplays[dpy]);
        if (hw->canDraw()) {
            // transform the dirty region into this screen's coordinate space
            const Region dirtyRegion(hw->getDirtyRegion(repaintEverything));

            // repaint the framebuffer (if needed)
            doDisplayComposition(hw, dirtyRegion);

            hw->dirtyRegion.clear();
            hw->flip(hw->swapRegion);
            hw->swapRegion.clear();
        }
        // inform the h/w that we're done compositing
        hw->compositionComplete();
    }
    postFramebuffer();
}

void SurfaceFlinger::postFramebuffer()
{
    ATRACE_CALL();

    const nsecs_t now = systemTime();
    mDebugInSwapBuffers = now;

    HWComposer& hwc(getHwComposer());
    if (hwc.initCheck() == NO_ERROR) {
        if (!hwc.supportsFramebufferTarget()) {
            // EGL spec says:
            //   "surface must be bound to the calling thread's current context,
            //    for the current rendering API."
            DisplayDevice::makeCurrent(mEGLDisplay,
                    getDefaultDisplayDevice(), mEGLContext);
        }
        hwc.commit();
    }

    for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
        sp<const DisplayDevice> hw(mDisplays[dpy]);
        const Vector< sp<LayerBase> >& currentLayers(hw->getVisibleLayersSortedByZ());
        hw->onSwapBuffersCompleted(hwc);
        const size_t count = currentLayers.size();
        int32_t id = hw->getHwcDisplayId();
        if (id >=0 && hwc.initCheck() == NO_ERROR) {
            HWComposer::LayerListIterator cur = hwc.begin(id);
            const HWComposer::LayerListIterator end = hwc.end(id);
            for (size_t i = 0; cur != end && i < count; ++i, ++cur) {
                currentLayers[i]->onLayerDisplayed(hw, &*cur);
            }
        } else {
            for (size_t i = 0; i < count; i++) {
                currentLayers[i]->onLayerDisplayed(hw, NULL);
            }
        }
    }

    mLastSwapBufferTime = systemTime() - now;
    mDebugInSwapBuffers = 0;
}

void SurfaceFlinger::handleTransaction(uint32_t transactionFlags)
{
    ATRACE_CALL();

    Mutex::Autolock _l(mStateLock);
    const nsecs_t now = systemTime();
    mDebugInTransaction = now;

    // Here we're guaranteed that some transaction flags are set
    // so we can call handleTransactionLocked() unconditionally.
    // We call getTransactionFlags(), which will also clear the flags,
    // with mStateLock held to guarantee that mCurrentState won't change
    // until the transaction is committed.

    transactionFlags = getTransactionFlags(eTransactionMask);
    handleTransactionLocked(transactionFlags);

    mLastTransactionTime = systemTime() - now;
    mDebugInTransaction = 0;
    invalidateHwcGeometry();
    // here the transaction has been committed
}

void SurfaceFlinger::handleTransactionLocked(uint32_t transactionFlags)
{
    const LayerVector& currentLayers(mCurrentState.layersSortedByZ);
    const size_t count = currentLayers.size();

    /*
     * Traversal of the children
     * (perform the transaction for each of them if needed)
     */

    if (transactionFlags & eTraversalNeeded) {
        for (size_t i=0 ; i<count ; i++) {
            const sp<LayerBase>& layer(currentLayers[i]);
            uint32_t trFlags = layer->getTransactionFlags(eTransactionNeeded);
            if (!trFlags) continue;

            const uint32_t flags = layer->doTransaction(0);
            if (flags & Layer::eVisibleRegion)
                mVisibleRegionsDirty = true;
        }
    }

    /*
     * Perform display own transactions if needed
     */

    if (transactionFlags & eDisplayTransactionNeeded) {
        // here we take advantage of Vector's copy-on-write semantics to
        // improve performance by skipping the transaction entirely when
        // know that the lists are identical
        const KeyedVector<  wp<IBinder>, DisplayDeviceState>& curr(mCurrentState.displays);
        const KeyedVector<  wp<IBinder>, DisplayDeviceState>& draw(mDrawingState.displays);
        if (!curr.isIdenticalTo(draw)) {
            mVisibleRegionsDirty = true;
            const size_t cc = curr.size();
                  size_t dc = draw.size();

            // find the displays that were removed
            // (ie: in drawing state but not in current state)
            // also handle displays that changed
            // (ie: displays that are in both lists)
            for (size_t i=0 ; i<dc ; i++) {
                const ssize_t j = curr.indexOfKey(draw.keyAt(i));
                if (j < 0) {
                    // in drawing state but not in current state
                    if (!draw[i].isMainDisplay()) {
                        // Call makeCurrent() on the primary display so we can
                        // be sure that nothing associated with this display
                        // is current.
                        const sp<const DisplayDevice> hw(getDefaultDisplayDevice());
                        DisplayDevice::makeCurrent(mEGLDisplay, hw, mEGLContext);
                        mDisplays.removeItem(draw.keyAt(i));
                        getHwComposer().disconnectDisplay(draw[i].type);
                        mEventThread->onHotplugReceived(draw[i].type, false);
                    } else {
                        ALOGW("trying to remove the main display");
                    }
                } else {
                    // this display is in both lists. see if something changed.
                    const DisplayDeviceState& state(curr[j]);
                    const wp<IBinder>& display(curr.keyAt(j));
                    if (state.surface->asBinder() != draw[i].surface->asBinder()) {
                        // changing the surface is like destroying and
                        // recreating the DisplayDevice, so we just remove it
                        // from the drawing state, so that it get re-added
                        // below.
                        mDisplays.removeItem(display);
                        mDrawingState.displays.removeItemsAt(i);
                        dc--; i--;
                        // at this point we must loop to the next item
                        continue;
                    }

                    const sp<DisplayDevice> disp(getDisplayDevice(display));
                    if (disp != NULL) {
                        if (state.layerStack != draw[i].layerStack) {
                            disp->setLayerStack(state.layerStack);
                        }
                        if ((state.orientation != draw[i].orientation)
                                || (state.viewport != draw[i].viewport)
                                || (state.frame != draw[i].frame))
                        {
                            disp->setProjection(state.orientation,
                                    state.viewport, state.frame);
                        }
                    }
                }
            }

            // find displays that were added
            // (ie: in current state but not in drawing state)
            for (size_t i=0 ; i<cc ; i++) {
                if (draw.indexOfKey(curr.keyAt(i)) < 0) {
                    const DisplayDeviceState& state(curr[i]);

                    sp<FramebufferSurface> fbs;
                    sp<SurfaceTextureClient> stc;
                    if (!state.isVirtualDisplay()) {

                        ALOGE_IF(state.surface!=NULL,
                                "adding a supported display, but rendering "
                                "surface is provided (%p), ignoring it",
                                state.surface.get());

                        // for supported (by hwc) displays we provide our
                        // own rendering surface
                        fbs = new FramebufferSurface(*mHwc, state.type);
                        stc = new SurfaceTextureClient(
                                static_cast< sp<ISurfaceTexture> >(
                                        fbs->getBufferQueue()));
                    } else {
                        if (state.surface != NULL) {
                            stc = new SurfaceTextureClient(state.surface);
                        }
                    }

                    const wp<IBinder>& display(curr.keyAt(i));
                    if (stc != NULL) {
                        sp<DisplayDevice> hw = new DisplayDevice(this,
                                state.type, state.isSecure, display, stc, fbs,
                                mEGLConfig);
                        hw->setLayerStack(state.layerStack);
                        hw->setProjection(state.orientation,
                                state.viewport, state.frame);
                        hw->setDisplayName(state.displayName);
                        mDisplays.add(display, hw);
                        mEventThread->onHotplugReceived(state.type, true);
                    }
                }
            }
        }
    }

    if (transactionFlags & (eTraversalNeeded|eDisplayTransactionNeeded)) {
        // The transform hint might have changed for some layers
        // (either because a display has changed, or because a layer
        // as changed).
        //
        // Walk through all the layers in currentLayers,
        // and update their transform hint.
        //
        // If a layer is visible only on a single display, then that
        // display is used to calculate the hint, otherwise we use the
        // default display.
        //
        // NOTE: we do this here, rather than in rebuildLayerStacks() so that
        // the hint is set before we acquire a buffer from the surface texture.
        //
        // NOTE: layer transactions have taken place already, so we use their
        // drawing state. However, SurfaceFlinger's own transaction has not
        // happened yet, so we must use the current state layer list
        // (soon to become the drawing state list).
        //
        sp<const DisplayDevice> disp;
        uint32_t currentlayerStack = 0;
        for (size_t i=0; i<count; i++) {
            // NOTE: we rely on the fact that layers are sorted by
            // layerStack first (so we don't have to traverse the list
            // of displays for every layer).
            const sp<LayerBase>& layerBase(currentLayers[i]);
            uint32_t layerStack = layerBase->drawingState().layerStack;
            if (i==0 || currentlayerStack != layerStack) {
                currentlayerStack = layerStack;
                // figure out if this layerstack is mirrored
                // (more than one display) if so, pick the default display,
                // if not, pick the only display it's on.
                disp.clear();
                for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
                    sp<const DisplayDevice> hw(mDisplays[dpy]);
                    if (hw->getLayerStack() == currentlayerStack) {
                        if (disp == NULL) {
                            disp = hw;
                        } else {
                            disp = getDefaultDisplayDevice();
                            break;
                        }
                    }
                }
            }
            if (disp != NULL) {
                // presumably this means this layer is using a layerStack
                // that is not visible on any display
                layerBase->updateTransformHint(disp);
            }
        }
    }


    /*
     * Perform our own transaction if needed
     */

    const LayerVector& previousLayers(mDrawingState.layersSortedByZ);
    if (currentLayers.size() > previousLayers.size()) {
        // layers have been added
        mVisibleRegionsDirty = true;
    }

    // some layers might have been removed, so
    // we need to update the regions they're exposing.
    if (mLayersRemoved) {
        mLayersRemoved = false;
        mVisibleRegionsDirty = true;
        const size_t count = previousLayers.size();
        for (size_t i=0 ; i<count ; i++) {
            const sp<LayerBase>& layer(previousLayers[i]);
            if (currentLayers.indexOf(layer) < 0) {
                // this layer is not visible anymore
                // TODO: we could traverse the tree from front to back and
                //       compute the actual visible region
                // TODO: we could cache the transformed region
                const Layer::State& s(layer->drawingState());
                Region visibleReg = s.transform.transform(
                        Region(Rect(s.active.w, s.active.h)));
                invalidateLayerStack(s.layerStack, visibleReg);
            }
        }
    }

    commitTransaction();
}

void SurfaceFlinger::commitTransaction()
{
    if (!mLayersPendingRemoval.isEmpty()) {
        // Notify removed layers now that they can't be drawn from
        for (size_t i = 0; i < mLayersPendingRemoval.size(); i++) {
            mLayersPendingRemoval[i]->onRemoved();
        }
        mLayersPendingRemoval.clear();
    }

    mDrawingState = mCurrentState;
    mTransactionPending = false;
    mAnimTransactionPending = false;
    mTransactionCV.broadcast();
}

void SurfaceFlinger::computeVisibleRegions(
        const LayerVector& currentLayers, uint32_t layerStack,
        Region& outDirtyRegion, Region& outOpaqueRegion)
{
    ATRACE_CALL();

    Region aboveOpaqueLayers;
    Region aboveCoveredLayers;
    Region dirty;

    outDirtyRegion.clear();

    size_t i = currentLayers.size();
    while (i--) {
        const sp<LayerBase>& layer = currentLayers[i];

        // start with the whole surface at its current location
        const Layer::State& s(layer->drawingState());

        // only consider the layers on the given later stack
        if (s.layerStack != layerStack)
            continue;

        /*
         * opaqueRegion: area of a surface that is fully opaque.
         */
        Region opaqueRegion;

        /*
         * visibleRegion: area of a surface that is visible on screen
         * and not fully transparent. This is essentially the layer's
         * footprint minus the opaque regions above it.
         * Areas covered by a translucent surface are considered visible.
         */
        Region visibleRegion;

        /*
         * coveredRegion: area of a surface that is covered by all
         * visible regions above it (which includes the translucent areas).
         */
        Region coveredRegion;

        /*
         * transparentRegion: area of a surface that is hinted to be completely
         * transparent. This is only used to tell when the layer has no visible
         * non-transparent regions and can be removed from the layer list. It
         * does not affect the visibleRegion of this layer or any layers
         * beneath it. The hint may not be correct if apps don't respect the
         * SurfaceView restrictions (which, sadly, some don't).
         */
        Region transparentRegion;


        // handle hidden surfaces by setting the visible region to empty
        if (CC_LIKELY(layer->isVisible())) {
            const bool translucent = !layer->isOpaque();
            Rect bounds(layer->computeBounds());
            visibleRegion.set(bounds);
            if (!visibleRegion.isEmpty()) {
                // Remove the transparent area from the visible region
                if (translucent) {
                    const Transform tr(s.transform);
                    if (tr.transformed()) {
                        if (tr.preserveRects()) {
                            // transform the transparent region
                            transparentRegion = tr.transform(s.transparentRegion);
                        } else {
                            // transformation too complex, can't do the
                            // transparent region optimization.
                            transparentRegion.clear();
                        }
                    } else {
                        transparentRegion = s.transparentRegion;
                    }
                }

                // compute the opaque region
                const int32_t layerOrientation = s.transform.getOrientation();
                if (s.alpha==255 && !translucent &&
                        ((layerOrientation & Transform::ROT_INVALID) == false)) {
                    // the opaque region is the layer's footprint
                    opaqueRegion = visibleRegion;
                }
            }
        }

        // Clip the covered region to the visible region
        coveredRegion = aboveCoveredLayers.intersect(visibleRegion);

        // Update aboveCoveredLayers for next (lower) layer
        aboveCoveredLayers.orSelf(visibleRegion);

        // subtract the opaque region covered by the layers above us
        visibleRegion.subtractSelf(aboveOpaqueLayers);

        // compute this layer's dirty region
        if (layer->contentDirty) {
            // we need to invalidate the whole region
            dirty = visibleRegion;
            // as well, as the old visible region
            dirty.orSelf(layer->visibleRegion);
            layer->contentDirty = false;
        } else {
            /* compute the exposed region:
             *   the exposed region consists of two components:
             *   1) what's VISIBLE now and was COVERED before
             *   2) what's EXPOSED now less what was EXPOSED before
             *
             * note that (1) is conservative, we start with the whole
             * visible region but only keep what used to be covered by
             * something -- which mean it may have been exposed.
             *
             * (2) handles areas that were not covered by anything but got
             * exposed because of a resize.
             */
            const Region newExposed = visibleRegion - coveredRegion;
            const Region oldVisibleRegion = layer->visibleRegion;
            const Region oldCoveredRegion = layer->coveredRegion;
            const Region oldExposed = oldVisibleRegion - oldCoveredRegion;
            dirty = (visibleRegion&oldCoveredRegion) | (newExposed-oldExposed);
        }
        dirty.subtractSelf(aboveOpaqueLayers);

        // accumulate to the screen dirty region
        outDirtyRegion.orSelf(dirty);

        // Update aboveOpaqueLayers for next (lower) layer
        aboveOpaqueLayers.orSelf(opaqueRegion);

        // Store the visible region in screen space
        layer->setVisibleRegion(visibleRegion);
        layer->setCoveredRegion(coveredRegion);
        layer->setVisibleNonTransparentRegion(
                visibleRegion.subtract(transparentRegion));
    }

    outOpaqueRegion = aboveOpaqueLayers;
}

void SurfaceFlinger::invalidateLayerStack(uint32_t layerStack,
        const Region& dirty) {
    for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
        const sp<DisplayDevice>& hw(mDisplays[dpy]);
        if (hw->getLayerStack() == layerStack) {
            hw->dirtyRegion.orSelf(dirty);
        }
    }
}

void SurfaceFlinger::handlePageFlip()
{
    Region dirtyRegion;

    bool visibleRegions = false;
    const LayerVector& currentLayers(mDrawingState.layersSortedByZ);
    const size_t count = currentLayers.size();
    for (size_t i=0 ; i<count ; i++) {
        const sp<LayerBase>& layer(currentLayers[i]);
        const Region dirty(layer->latchBuffer(visibleRegions));
        const Layer::State& s(layer->drawingState());
        invalidateLayerStack(s.layerStack, dirty);
    }

    mVisibleRegionsDirty |= visibleRegions;
}

void SurfaceFlinger::invalidateHwcGeometry()
{
    mHwWorkListDirty = true;
}


void SurfaceFlinger::doDisplayComposition(const sp<const DisplayDevice>& hw,
        const Region& inDirtyRegion)
{
    Region dirtyRegion(inDirtyRegion);

    // compute the invalid region
    hw->swapRegion.orSelf(dirtyRegion);

    uint32_t flags = hw->getFlags();
    if (flags & DisplayDevice::SWAP_RECTANGLE) {
        // we can redraw only what's dirty, but since SWAP_RECTANGLE only
        // takes a rectangle, we must make sure to update that whole
        // rectangle in that case
        dirtyRegion.set(hw->swapRegion.bounds());
    } else {
        if (flags & DisplayDevice::PARTIAL_UPDATES) {
            // We need to redraw the rectangle that will be updated
            // (pushed to the framebuffer).
            // This is needed because PARTIAL_UPDATES only takes one
            // rectangle instead of a region (see DisplayDevice::flip())
            dirtyRegion.set(hw->swapRegion.bounds());
        } else {
            // we need to redraw everything (the whole screen)
            dirtyRegion.set(hw->bounds());
            hw->swapRegion = dirtyRegion;
        }
    }

    doComposeSurfaces(hw, dirtyRegion);

    // update the swap region and clear the dirty region
    hw->swapRegion.orSelf(dirtyRegion);

    // swap buffers (presentation)
    hw->swapBuffers(getHwComposer());
}

void SurfaceFlinger::doComposeSurfaces(const sp<const DisplayDevice>& hw, const Region& dirty)
{
    const int32_t id = hw->getHwcDisplayId();
    HWComposer& hwc(getHwComposer());
    HWComposer::LayerListIterator cur = hwc.begin(id);
    const HWComposer::LayerListIterator end = hwc.end(id);

    const bool hasGlesComposition = hwc.hasGlesComposition(id) || (cur==end);
    if (hasGlesComposition) {
        DisplayDevice::makeCurrent(mEGLDisplay, hw, mEGLContext);

        // set the frame buffer
        glMatrixMode(GL_MODELVIEW);
        glLoadIdentity();

        // Never touch the framebuffer if we don't have any framebuffer layers
        const bool hasHwcComposition = hwc.hasHwcComposition(id);
        if (hasHwcComposition) {
            // when using overlays, we assume a fully transparent framebuffer
            // NOTE: we could reduce how much we need to clear, for instance
            // remove where there are opaque FB layers. however, on some
            // GPUs doing a "clean slate" glClear might be more efficient.
            // We'll revisit later if needed.
            glClearColor(0, 0, 0, 0);
            glClear(GL_COLOR_BUFFER_BIT);
        } else {
            const Region region(hw->undefinedRegion.intersect(dirty));
            // screen is already cleared here
            if (!region.isEmpty()) {
                // can happen with SurfaceView
                drawWormhole(hw, region);
            }
        }

        if (hw->getDisplayType() >= DisplayDevice::DISPLAY_EXTERNAL) {
            // TODO: just to be on the safe side, we don't set the
            // scissor on the main display. It should never be needed
            // anyways (though in theory it could since the API allows it).
            const Rect& bounds(hw->getBounds());
            const Transform& tr(hw->getTransform());
            const Rect scissor(tr.transform(hw->getViewport()));
            if (scissor != bounds) {
                // scissor doesn't match the screen's dimensions, so we
                // need to clear everything outside of it and enable
                // the GL scissor so we don't draw anything where we shouldn't
                const GLint height = hw->getHeight();
                glScissor(scissor.left, height - scissor.bottom,
                        scissor.getWidth(), scissor.getHeight());
                // clear everything unscissored
                glClearColor(0, 0, 0, 0);
                glClear(GL_COLOR_BUFFER_BIT);
                // enable scissor for this frame
                glEnable(GL_SCISSOR_TEST);
            }
        }
    }

    /*
     * and then, render the layers targeted at the framebuffer
     */

    const Vector< sp<LayerBase> >& layers(hw->getVisibleLayersSortedByZ());
    const size_t count = layers.size();
    const Transform& tr = hw->getTransform();
    if (cur != end) {
        // we're using h/w composer
        for (size_t i=0 ; i<count && cur!=end ; ++i, ++cur) {
            const sp<LayerBase>& layer(layers[i]);
            const Region clip(dirty.intersect(tr.transform(layer->visibleRegion)));
            if (!clip.isEmpty()) {
                switch (cur->getCompositionType()) {
                    case HWC_OVERLAY: {
                        if ((cur->getHints() & HWC_HINT_CLEAR_FB)
                                && i
                                && layer->isOpaque()
                                && hasGlesComposition) {
                            // never clear the very first layer since we're
                            // guaranteed the FB is already cleared
                            layer->clearWithOpenGL(hw, clip);
                        }
                        break;
                    }
                    case HWC_FRAMEBUFFER: {
                        layer->draw(hw, clip);
                        break;
                    }
                    case HWC_FRAMEBUFFER_TARGET: {
                        // this should not happen as the iterator shouldn't
                        // let us get there.
                        ALOGW("HWC_FRAMEBUFFER_TARGET found in hwc list (index=%d)", i);
                        break;
                    }
                }
            }
            layer->setAcquireFence(hw, *cur);
        }
    } else {
        // we're not using h/w composer
        for (size_t i=0 ; i<count ; ++i) {
            const sp<LayerBase>& layer(layers[i]);
            const Region clip(dirty.intersect(
                    tr.transform(layer->visibleRegion)));
            if (!clip.isEmpty()) {
                layer->draw(hw, clip);
            }
        }
    }

    // disable scissor at the end of the frame
    glDisable(GL_SCISSOR_TEST);
}

void SurfaceFlinger::drawWormhole(const sp<const DisplayDevice>& hw,
        const Region& region) const
{
    glDisable(GL_TEXTURE_EXTERNAL_OES);
    glDisable(GL_TEXTURE_2D);
    glDisable(GL_BLEND);
    glColor4f(0,0,0,0);

    const int32_t height = hw->getHeight();
    Region::const_iterator it = region.begin();
    Region::const_iterator const end = region.end();
    while (it != end) {
        const Rect& r = *it++;
        GLfloat vertices[][2] = {
                { r.left,  height - r.top },
                { r.left,  height - r.bottom },
                { r.right, height - r.bottom },
                { r.right, height - r.top }
        };
        glVertexPointer(2, GL_FLOAT, 0, vertices);
        glDrawArrays(GL_TRIANGLE_FAN, 0, 4);
    }
}

ssize_t SurfaceFlinger::addClientLayer(const sp<Client>& client,
        const sp<LayerBaseClient>& lbc)
{
    // attach this layer to the client
    size_t name = client->attachLayer(lbc);

    // add this layer to the current state list
    Mutex::Autolock _l(mStateLock);
    mCurrentState.layersSortedByZ.add(lbc);

    return ssize_t(name);
}

status_t SurfaceFlinger::removeLayer(const sp<LayerBase>& layer)
{
    Mutex::Autolock _l(mStateLock);
    status_t err = purgatorizeLayer_l(layer);
    if (err == NO_ERROR)
        setTransactionFlags(eTransactionNeeded);
    return err;
}

status_t SurfaceFlinger::removeLayer_l(const sp<LayerBase>& layerBase)
{
    ssize_t index = mCurrentState.layersSortedByZ.remove(layerBase);
    if (index >= 0) {
        mLayersRemoved = true;
        return NO_ERROR;
    }
    return status_t(index);
}

status_t SurfaceFlinger::purgatorizeLayer_l(const sp<LayerBase>& layerBase)
{
    // First add the layer to the purgatory list, which makes sure it won't
    // go away, then remove it from the main list (through a transaction).
    ssize_t err = removeLayer_l(layerBase);
    if (err >= 0) {
        mLayerPurgatory.add(layerBase);
    }

    mLayersPendingRemoval.push(layerBase);

    // it's possible that we don't find a layer, because it might
    // have been destroyed already -- this is not technically an error
    // from the user because there is a race between Client::destroySurface(),
    // ~Client() and ~ISurface().
    return (err == NAME_NOT_FOUND) ? status_t(NO_ERROR) : err;
}

uint32_t SurfaceFlinger::peekTransactionFlags(uint32_t flags)
{
    return android_atomic_release_load(&mTransactionFlags);
}

uint32_t SurfaceFlinger::getTransactionFlags(uint32_t flags)
{
    return android_atomic_and(~flags, &mTransactionFlags) & flags;
}

uint32_t SurfaceFlinger::setTransactionFlags(uint32_t flags)
{
    uint32_t old = android_atomic_or(flags, &mTransactionFlags);
    if ((old & flags)==0) { // wake the server up
        signalTransaction();
    }
    return old;
}

void SurfaceFlinger::setTransactionState(
        const Vector<ComposerState>& state,
        const Vector<DisplayState>& displays,
        uint32_t flags)
{
    ATRACE_CALL();
    Mutex::Autolock _l(mStateLock);
    uint32_t transactionFlags = 0;

    if (flags & eAnimation) {
        // For window updates that are part of an animation we must wait for
        // previous animation "frames" to be handled.
        while (mAnimTransactionPending) {
            status_t err = mTransactionCV.waitRelative(mStateLock, s2ns(5));
            if (CC_UNLIKELY(err != NO_ERROR)) {
                // just in case something goes wrong in SF, return to the
                // caller after a few seconds.
                ALOGW_IF(err == TIMED_OUT, "setTransactionState timed out "
                        "waiting for previous animation frame");
                mAnimTransactionPending = false;
                break;
            }
        }
    }

    size_t count = displays.size();
    for (size_t i=0 ; i<count ; i++) {
        const DisplayState& s(displays[i]);
        transactionFlags |= setDisplayStateLocked(s);
    }

    count = state.size();
    for (size_t i=0 ; i<count ; i++) {
        const ComposerState& s(state[i]);
        // Here we need to check that the interface we're given is indeed
        // one of our own. A malicious client could give us a NULL
        // IInterface, or one of its own or even one of our own but a
        // different type. All these situations would cause us to crash.
        //
        // NOTE: it would be better to use RTTI as we could directly check
        // that we have a Client*. however, RTTI is disabled in Android.
        if (s.client != NULL) {
            sp<IBinder> binder = s.client->asBinder();
            if (binder != NULL) {
                String16 desc(binder->getInterfaceDescriptor());
                if (desc == ISurfaceComposerClient::descriptor) {
                    sp<Client> client( static_cast<Client *>(s.client.get()) );
                    transactionFlags |= setClientStateLocked(client, s.state);
                }
            }
        }
    }

    if (transactionFlags) {
        // this triggers the transaction
        setTransactionFlags(transactionFlags);

        // if this is a synchronous transaction, wait for it to take effect
        // before returning.
        if (flags & eSynchronous) {
            mTransactionPending = true;
        }
        if (flags & eAnimation) {
            mAnimTransactionPending = true;
        }
        while (mTransactionPending) {
            status_t err = mTransactionCV.waitRelative(mStateLock, s2ns(5));
            if (CC_UNLIKELY(err != NO_ERROR)) {
                // just in case something goes wrong in SF, return to the
                // called after a few seconds.
                ALOGW_IF(err == TIMED_OUT, "setTransactionState timed out!");
                mTransactionPending = false;
                break;
            }
        }
    }
}

uint32_t SurfaceFlinger::setDisplayStateLocked(const DisplayState& s)
{
    ssize_t dpyIdx = mCurrentState.displays.indexOfKey(s.token);
    if (dpyIdx < 0)
        return 0;

    uint32_t flags = 0;
    DisplayDeviceState& disp(mCurrentState.displays.editValueAt(dpyIdx));
    if (disp.isValid()) {
        const uint32_t what = s.what;
        if (what & DisplayState::eSurfaceChanged) {
            if (disp.surface->asBinder() != s.surface->asBinder()) {
                disp.surface = s.surface;
                flags |= eDisplayTransactionNeeded;
            }
        }
        if (what & DisplayState::eLayerStackChanged) {
            if (disp.layerStack != s.layerStack) {
                disp.layerStack = s.layerStack;
                flags |= eDisplayTransactionNeeded;
            }
        }
        if (what & DisplayState::eDisplayProjectionChanged) {
            if (disp.orientation != s.orientation) {
                disp.orientation = s.orientation;
                flags |= eDisplayTransactionNeeded;
            }
            if (disp.frame != s.frame) {
                disp.frame = s.frame;
                flags |= eDisplayTransactionNeeded;
            }
            if (disp.viewport != s.viewport) {
                disp.viewport = s.viewport;
                flags |= eDisplayTransactionNeeded;
            }
        }
    }
    return flags;
}

uint32_t SurfaceFlinger::setClientStateLocked(
        const sp<Client>& client,
        const layer_state_t& s)
{
    uint32_t flags = 0;
    sp<LayerBaseClient> layer(client->getLayerUser(s.surface));
    if (layer != 0) {
        const uint32_t what = s.what;
        if (what & layer_state_t::ePositionChanged) {
            if (layer->setPosition(s.x, s.y))
                flags |= eTraversalNeeded;
        }
        if (what & layer_state_t::eLayerChanged) {
            // NOTE: index needs to be calculated before we update the state
            ssize_t idx = mCurrentState.layersSortedByZ.indexOf(layer);
            if (layer->setLayer(s.z)) {
                mCurrentState.layersSortedByZ.removeAt(idx);
                mCurrentState.layersSortedByZ.add(layer);
                // we need traversal (state changed)
                // AND transaction (list changed)
                flags |= eTransactionNeeded|eTraversalNeeded;
            }
        }
        if (what & layer_state_t::eSizeChanged) {
            if (layer->setSize(s.w, s.h)) {
                flags |= eTraversalNeeded;
            }
        }
        if (what & layer_state_t::eAlphaChanged) {
            if (layer->setAlpha(uint8_t(255.0f*s.alpha+0.5f)))
                flags |= eTraversalNeeded;
        }
        if (what & layer_state_t::eMatrixChanged) {
            if (layer->setMatrix(s.matrix))
                flags |= eTraversalNeeded;
        }
        if (what & layer_state_t::eTransparentRegionChanged) {
            if (layer->setTransparentRegionHint(s.transparentRegion))
                flags |= eTraversalNeeded;
        }
        if (what & layer_state_t::eVisibilityChanged) {
            if (layer->setFlags(s.flags, s.mask))
                flags |= eTraversalNeeded;
        }
        if (what & layer_state_t::eCropChanged) {
            if (layer->setCrop(s.crop))
                flags |= eTraversalNeeded;
        }
        if (what & layer_state_t::eLayerStackChanged) {
            // NOTE: index needs to be calculated before we update the state
            ssize_t idx = mCurrentState.layersSortedByZ.indexOf(layer);
            if (layer->setLayerStack(s.layerStack)) {
                mCurrentState.layersSortedByZ.removeAt(idx);
                mCurrentState.layersSortedByZ.add(layer);
                // we need traversal (state changed)
                // AND transaction (list changed)
                flags |= eTransactionNeeded|eTraversalNeeded;
            }
        }
    }
    return flags;
}

sp<ISurface> SurfaceFlinger::createLayer(
        ISurfaceComposerClient::surface_data_t* params,
        const String8& name,
        const sp<Client>& client,
       uint32_t w, uint32_t h, PixelFormat format,
        uint32_t flags)
{
    sp<LayerBaseClient> layer;
    sp<ISurface> surfaceHandle;

    if (int32_t(w|h) < 0) {
        ALOGE("createLayer() failed, w or h is negative (w=%d, h=%d)",
                int(w), int(h));
        return surfaceHandle;
    }

    //ALOGD("createLayer for (%d x %d), name=%s", w, h, name.string());
    switch (flags & ISurfaceComposerClient::eFXSurfaceMask) {
        case ISurfaceComposerClient::eFXSurfaceNormal:
            layer = createNormalLayer(client, w, h, flags, format);
            break;
        case ISurfaceComposerClient::eFXSurfaceBlur:
        case ISurfaceComposerClient::eFXSurfaceDim:
            layer = createDimLayer(client, w, h, flags);
            break;
        case ISurfaceComposerClient::eFXSurfaceScreenshot:
            layer = createScreenshotLayer(client, w, h, flags);
            break;
    }

    if (layer != 0) {
        layer->initStates(w, h, flags);
        layer->setName(name);
        ssize_t token = addClientLayer(client, layer);
        surfaceHandle = layer->getSurface();
        if (surfaceHandle != 0) {
            params->token = token;
            params->identity = layer->getIdentity();
        }
        setTransactionFlags(eTransactionNeeded);
    }

    return surfaceHandle;
}

sp<Layer> SurfaceFlinger::createNormalLayer(
        const sp<Client>& client,
        uint32_t w, uint32_t h, uint32_t flags,
        PixelFormat& format)
{
    // initialize the surfaces
    switch (format) {
    case PIXEL_FORMAT_TRANSPARENT:
    case PIXEL_FORMAT_TRANSLUCENT:
        format = PIXEL_FORMAT_RGBA_8888;
        break;
    case PIXEL_FORMAT_OPAQUE:
#ifdef NO_RGBX_8888
        format = PIXEL_FORMAT_RGB_565;
#else
        format = PIXEL_FORMAT_RGBX_8888;
#endif
        break;
    }

#ifdef NO_RGBX_8888
    if (format == PIXEL_FORMAT_RGBX_8888)
        format = PIXEL_FORMAT_RGBA_8888;
#endif

    sp<Layer> layer = new Layer(this, client);
    status_t err = layer->setBuffers(w, h, format, flags);
    if (CC_LIKELY(err != NO_ERROR)) {
        ALOGE("createNormalLayer() failed (%s)", strerror(-err));
        layer.clear();
    }
    return layer;
}

sp<LayerDim> SurfaceFlinger::createDimLayer(
        const sp<Client>& client,
        uint32_t w, uint32_t h, uint32_t flags)
{
    sp<LayerDim> layer = new LayerDim(this, client);
    return layer;
}

sp<LayerScreenshot> SurfaceFlinger::createScreenshotLayer(
        const sp<Client>& client,
        uint32_t w, uint32_t h, uint32_t flags)
{
    sp<LayerScreenshot> layer = new LayerScreenshot(this, client);
    return layer;
}

status_t SurfaceFlinger::onLayerRemoved(const sp<Client>& client, SurfaceID sid)
{
    /*
     * called by the window manager, when a surface should be marked for
     * destruction.
     *
     * The surface is removed from the current and drawing lists, but placed
     * in the purgatory queue, so it's not destroyed right-away (we need
     * to wait for all client's references to go away first).
     */

    status_t err = NAME_NOT_FOUND;
    Mutex::Autolock _l(mStateLock);
    sp<LayerBaseClient> layer = client->getLayerUser(sid);

    if (layer != 0) {
        err = purgatorizeLayer_l(layer);
        if (err == NO_ERROR) {
            setTransactionFlags(eTransactionNeeded);
        }
    }
    return err;
}

status_t SurfaceFlinger::onLayerDestroyed(const wp<LayerBaseClient>& layer)
{
    // called by ~ISurface() when all references are gone
    status_t err = NO_ERROR;
    sp<LayerBaseClient> l(layer.promote());
    if (l != NULL) {
        Mutex::Autolock _l(mStateLock);
        err = removeLayer_l(l);
        if (err == NAME_NOT_FOUND) {
            // The surface wasn't in the current list, which means it was
            // removed already, which means it is in the purgatory,
            // and need to be removed from there.
            ssize_t idx = mLayerPurgatory.remove(l);
            ALOGE_IF(idx < 0,
                    "layer=%p is not in the purgatory list", l.get());
        }
        ALOGE_IF(err<0 && err != NAME_NOT_FOUND,
                "error removing layer=%p (%s)", l.get(), strerror(-err));
    }
    return err;
}

// ---------------------------------------------------------------------------

void SurfaceFlinger::onInitializeDisplays() {
    // reset screen orientation
    Vector<ComposerState> state;
    Vector<DisplayState> displays;
    DisplayState d;
    d.what = DisplayState::eDisplayProjectionChanged;
    d.token = mBuiltinDisplays[DisplayDevice::DISPLAY_PRIMARY];
    d.orientation = DisplayState::eOrientationDefault;
    d.frame.makeInvalid();
    d.viewport.makeInvalid();
    displays.add(d);
    setTransactionState(state, displays, 0);
    onScreenAcquired(getDefaultDisplayDevice());
}

void SurfaceFlinger::initializeDisplays() {
    class MessageScreenInitialized : public MessageBase {
        SurfaceFlinger* flinger;
    public:
        MessageScreenInitialized(SurfaceFlinger* flinger) : flinger(flinger) { }
        virtual bool handler() {
            flinger->onInitializeDisplays();
            return true;
        }
    };
    sp<MessageBase> msg = new MessageScreenInitialized(this);
    postMessageAsync(msg);  // we may be called from main thread, use async message
}


void SurfaceFlinger::onScreenAcquired(const sp<const DisplayDevice>& hw) {
    ALOGD("Screen acquired, type=%d flinger=%p", hw->getDisplayType(), this);
    if (hw->isScreenAcquired()) {
        // this is expected, e.g. when power manager wakes up during boot
        ALOGD(" screen was previously acquired");
        return;
    }

    hw->acquireScreen();
    int32_t type = hw->getDisplayType();
    if (type < DisplayDevice::NUM_DISPLAY_TYPES) {
        // built-in display, tell the HWC
        getHwComposer().acquire(type);

        if (type == DisplayDevice::DISPLAY_PRIMARY) {
            // FIXME: eventthread only knows about the main display right now
            mEventThread->onScreenAcquired();
        }
    }
    mVisibleRegionsDirty = true;
    repaintEverything();
}

void SurfaceFlinger::onScreenReleased(const sp<const DisplayDevice>& hw) {
    ALOGD("Screen released, type=%d flinger=%p", hw->getDisplayType(), this);
    if (!hw->isScreenAcquired()) {
        ALOGD(" screen was previously released");
        return;
    }

    hw->releaseScreen();
    int32_t type = hw->getDisplayType();
    if (type < DisplayDevice::NUM_DISPLAY_TYPES) {
        if (type == DisplayDevice::DISPLAY_PRIMARY) {
            // FIXME: eventthread only knows about the main display right now
            mEventThread->onScreenReleased();
        }

        // built-in display, tell the HWC
        getHwComposer().release(type);
    }
    mVisibleRegionsDirty = true;
    // from this point on, SF will stop drawing on this display
}

void SurfaceFlinger::unblank(const sp<IBinder>& display) {
    class MessageScreenAcquired : public MessageBase {
        SurfaceFlinger& mFlinger;
        sp<IBinder> mDisplay;
    public:
        MessageScreenAcquired(SurfaceFlinger& flinger,
                const sp<IBinder>& disp) : mFlinger(flinger), mDisplay(disp) { }
        virtual bool handler() {
            const sp<DisplayDevice> hw(mFlinger.getDisplayDevice(mDisplay));
            if (hw == NULL) {
                ALOGE("Attempt to unblank null display %p", mDisplay.get());
            } else if (hw->getDisplayType() >= DisplayDevice::NUM_DISPLAY_TYPES) {
                ALOGW("Attempt to unblank virtual display");
            } else {
                mFlinger.onScreenAcquired(hw);
            }
            return true;
        }
    };
    sp<MessageBase> msg = new MessageScreenAcquired(*this, display);
    postMessageSync(msg);
}

void SurfaceFlinger::blank(const sp<IBinder>& display) {
    class MessageScreenReleased : public MessageBase {
        SurfaceFlinger& mFlinger;
        sp<IBinder> mDisplay;
    public:
        MessageScreenReleased(SurfaceFlinger& flinger,
                const sp<IBinder>& disp) : mFlinger(flinger), mDisplay(disp) { }
        virtual bool handler() {
            const sp<DisplayDevice> hw(mFlinger.getDisplayDevice(mDisplay));
            if (hw == NULL) {
                ALOGE("Attempt to blank null display %p", mDisplay.get());
            } else if (hw->getDisplayType() >= DisplayDevice::NUM_DISPLAY_TYPES) {
                ALOGW("Attempt to blank virtual display");
            } else {
                mFlinger.onScreenReleased(hw);
            }
            return true;
        }
    };
    sp<MessageBase> msg = new MessageScreenReleased(*this, display);
    postMessageSync(msg);
}

// ---------------------------------------------------------------------------

status_t SurfaceFlinger::dump(int fd, const Vector<String16>& args)
{
    const size_t SIZE = 4096;
    char buffer[SIZE];
    String8 result;

    if (!PermissionCache::checkCallingPermission(sDump)) {
        snprintf(buffer, SIZE, "Permission Denial: "
                "can't dump SurfaceFlinger from pid=%d, uid=%d\n",
                IPCThreadState::self()->getCallingPid(),
                IPCThreadState::self()->getCallingUid());
        result.append(buffer);
    } else {
        // Try to get the main lock, but don't insist if we can't
        // (this would indicate SF is stuck, but we want to be able to
        // print something in dumpsys).
        int retry = 3;
        while (mStateLock.tryLock()<0 && --retry>=0) {
            usleep(1000000);
        }
        const bool locked(retry >= 0);
        if (!locked) {
            snprintf(buffer, SIZE,
                    "SurfaceFlinger appears to be unresponsive, "
                    "dumping anyways (no locks held)\n");
            result.append(buffer);
        }

        bool dumpAll = true;
        size_t index = 0;
        size_t numArgs = args.size();
        if (numArgs) {
            if ((index < numArgs) &&
                    (args[index] == String16("--list"))) {
                index++;
                listLayersLocked(args, index, result, buffer, SIZE);
                dumpAll = false;
            }

            if ((index < numArgs) &&
                    (args[index] == String16("--latency"))) {
                index++;
                dumpStatsLocked(args, index, result, buffer, SIZE);
                dumpAll = false;
            }

            if ((index < numArgs) &&
                    (args[index] == String16("--latency-clear"))) {
                index++;
                clearStatsLocked(args, index, result, buffer, SIZE);
                dumpAll = false;
            }
        }

        if (dumpAll) {
            dumpAllLocked(result, buffer, SIZE);
        }

        if (locked) {
            mStateLock.unlock();
        }
    }
    write(fd, result.string(), result.size());
    return NO_ERROR;
}

void SurfaceFlinger::listLayersLocked(const Vector<String16>& args, size_t& index,
        String8& result, char* buffer, size_t SIZE) const
{
    const LayerVector& currentLayers = mCurrentState.layersSortedByZ;
    const size_t count = currentLayers.size();
    for (size_t i=0 ; i<count ; i++) {
        const sp<LayerBase>& layer(currentLayers[i]);
        snprintf(buffer, SIZE, "%s\n", layer->getName().string());
        result.append(buffer);
    }
}

void SurfaceFlinger::dumpStatsLocked(const Vector<String16>& args, size_t& index,
        String8& result, char* buffer, size_t SIZE) const
{
    String8 name;
    if (index < args.size()) {
        name = String8(args[index]);
        index++;
    }

    const LayerVector& currentLayers = mCurrentState.layersSortedByZ;
    const size_t count = currentLayers.size();
    for (size_t i=0 ; i<count ; i++) {
        const sp<LayerBase>& layer(currentLayers[i]);
        if (name.isEmpty()) {
            snprintf(buffer, SIZE, "%s\n", layer->getName().string());
            result.append(buffer);
        }
        if (name.isEmpty() || (name == layer->getName())) {
            layer->dumpStats(result, buffer, SIZE);
        }
    }
}

void SurfaceFlinger::clearStatsLocked(const Vector<String16>& args, size_t& index,
        String8& result, char* buffer, size_t SIZE) const
{
    String8 name;
    if (index < args.size()) {
        name = String8(args[index]);
        index++;
    }

    const LayerVector& currentLayers = mCurrentState.layersSortedByZ;
    const size_t count = currentLayers.size();
    for (size_t i=0 ; i<count ; i++) {
        const sp<LayerBase>& layer(currentLayers[i]);
        if (name.isEmpty() || (name == layer->getName())) {
            layer->clearStats();
        }
    }
}

/*static*/ void SurfaceFlinger::appendSfConfigString(String8& result)
{
    static const char* config =
            " [sf"
#ifdef NO_RGBX_8888
            " NO_RGBX_8888"
#endif
#ifdef HAS_CONTEXT_PRIORITY
            " HAS_CONTEXT_PRIORITY"
#endif
#ifdef NEVER_DEFAULT_TO_ASYNC_MODE
            " NEVER_DEFAULT_TO_ASYNC_MODE"
#endif
#ifdef TARGET_DISABLE_TRIPLE_BUFFERING
            " TARGET_DISABLE_TRIPLE_BUFFERING"
#endif
            "]";
    result.append(config);
}

void SurfaceFlinger::dumpAllLocked(
        String8& result, char* buffer, size_t SIZE) const
{
    // figure out if we're stuck somewhere
    const nsecs_t now = systemTime();
    const nsecs_t inSwapBuffers(mDebugInSwapBuffers);
    const nsecs_t inTransaction(mDebugInTransaction);
    nsecs_t inSwapBuffersDuration = (inSwapBuffers) ? now-inSwapBuffers : 0;
    nsecs_t inTransactionDuration = (inTransaction) ? now-inTransaction : 0;

    /*
     * Dump library configuration.
     */
    result.append("Build configuration:");
    appendSfConfigString(result);
    appendUiConfigString(result);
    appendGuiConfigString(result);
    result.append("\n");

    /*
     * Dump the visible layer list
     */
    const LayerVector& currentLayers = mCurrentState.layersSortedByZ;
    const size_t count = currentLayers.size();
    snprintf(buffer, SIZE, "Visible layers (count = %d)\n", count);
    result.append(buffer);
    for (size_t i=0 ; i<count ; i++) {
        const sp<LayerBase>& layer(currentLayers[i]);
        layer->dump(result, buffer, SIZE);
    }

    /*
     * Dump the layers in the purgatory
     */

    const size_t purgatorySize = mLayerPurgatory.size();
    snprintf(buffer, SIZE, "Purgatory state (%d entries)\n", purgatorySize);
    result.append(buffer);
    for (size_t i=0 ; i<purgatorySize ; i++) {
        const sp<LayerBase>& layer(mLayerPurgatory.itemAt(i));
        layer->shortDump(result, buffer, SIZE);
    }

    /*
     * Dump Display state
     */

    snprintf(buffer, SIZE, "Displays (%d entries)\n", mDisplays.size());
    result.append(buffer);
    for (size_t dpy=0 ; dpy<mDisplays.size() ; dpy++) {
        const sp<const DisplayDevice>& hw(mDisplays[dpy]);
        hw->dump(result, buffer, SIZE);
    }

    /*
     * Dump SurfaceFlinger global state
     */

    snprintf(buffer, SIZE, "SurfaceFlinger global state:\n");
    result.append(buffer);

    HWComposer& hwc(getHwComposer());
    sp<const DisplayDevice> hw(getDefaultDisplayDevice());
    const GLExtensions& extensions(GLExtensions::getInstance());
    snprintf(buffer, SIZE, "GLES: %s, %s, %s\n",
            extensions.getVendor(),
            extensions.getRenderer(),
            extensions.getVersion());
    result.append(buffer);

    snprintf(buffer, SIZE, "EGL : %s\n",
            eglQueryString(mEGLDisplay, EGL_VERSION_HW_ANDROID));
    result.append(buffer);

    snprintf(buffer, SIZE, "EXTS: %s\n", extensions.getExtension());
    result.append(buffer);

    hw->undefinedRegion.dump(result, "undefinedRegion");
    snprintf(buffer, SIZE,
            "  orientation=%d, canDraw=%d\n",
            hw->getOrientation(), hw->canDraw());
    result.append(buffer);
    snprintf(buffer, SIZE,
            "  last eglSwapBuffers() time: %f us\n"
            "  last transaction time     : %f us\n"
            "  transaction-flags         : %08x\n"
            "  refresh-rate              : %f fps\n"
            "  x-dpi                     : %f\n"
            "  y-dpi                     : %f\n",
            mLastSwapBufferTime/1000.0,
            mLastTransactionTime/1000.0,
            mTransactionFlags,
            1e9 / hwc.getRefreshPeriod(HWC_DISPLAY_PRIMARY),
            hwc.getDpiX(HWC_DISPLAY_PRIMARY),
            hwc.getDpiY(HWC_DISPLAY_PRIMARY));
    result.append(buffer);

    snprintf(buffer, SIZE, "  eglSwapBuffers time: %f us\n",
            inSwapBuffersDuration/1000.0);
    result.append(buffer);

    snprintf(buffer, SIZE, "  transaction time: %f us\n",
            inTransactionDuration/1000.0);
    result.append(buffer);

    /*
     * VSYNC state
     */
    mEventThread->dump(result, buffer, SIZE);

    /*
     * Dump HWComposer state
     */
    snprintf(buffer, SIZE, "h/w composer state:\n");
    result.append(buffer);
    snprintf(buffer, SIZE, "  h/w composer %s and %s\n",
            hwc.initCheck()==NO_ERROR ? "present" : "not present",
                    (mDebugDisableHWC || mDebugRegion) ? "disabled" : "enabled");
    result.append(buffer);
    hwc.dump(result, buffer, SIZE);

    /*
     * Dump gralloc state
     */
    const GraphicBufferAllocator& alloc(GraphicBufferAllocator::get());
    alloc.dump(result);
}

const Vector< sp<LayerBase> >&
SurfaceFlinger::getLayerSortedByZForHwcDisplay(int disp) {
    // Note: mStateLock is held here
    return getDisplayDevice( getBuiltInDisplay(disp) )->getVisibleLayersSortedByZ();
}

bool SurfaceFlinger::startDdmConnection()
{
    void* libddmconnection_dso =
            dlopen("libsurfaceflinger_ddmconnection.so", RTLD_NOW);
    if (!libddmconnection_dso) {
        return false;
    }
    void (*DdmConnection_start)(const char* name);
    DdmConnection_start =
            (typeof DdmConnection_start)dlsym(libddmconnection_dso, "DdmConnection_start");
    if (!DdmConnection_start) {
        dlclose(libddmconnection_dso);
        return false;
    }
    (*DdmConnection_start)(getServiceName());
    return true;
}

status_t SurfaceFlinger::onTransact(
    uint32_t code, const Parcel& data, Parcel* reply, uint32_t flags)
{
    switch (code) {
        case CREATE_CONNECTION:
        case SET_TRANSACTION_STATE:
        case BOOT_FINISHED:
        case BLANK:
        case UNBLANK:
        {
            // codes that require permission check
            IPCThreadState* ipc = IPCThreadState::self();
            const int pid = ipc->getCallingPid();
            const int uid = ipc->getCallingUid();
            if ((uid != AID_GRAPHICS) &&
                    !PermissionCache::checkPermission(sAccessSurfaceFlinger, pid, uid)) {
                ALOGE("Permission Denial: "
                        "can't access SurfaceFlinger pid=%d, uid=%d", pid, uid);
                return PERMISSION_DENIED;
            }
            break;
        }
        case CAPTURE_SCREEN:
        {
            // codes that require permission check
            IPCThreadState* ipc = IPCThreadState::self();
            const int pid = ipc->getCallingPid();
            const int uid = ipc->getCallingUid();
            if ((uid != AID_GRAPHICS) &&
                    !PermissionCache::checkPermission(sReadFramebuffer, pid, uid)) {
                ALOGE("Permission Denial: "
                        "can't read framebuffer pid=%d, uid=%d", pid, uid);
                return PERMISSION_DENIED;
            }
            break;
        }
    }

    status_t err = BnSurfaceComposer::onTransact(code, data, reply, flags);
    if (err == UNKNOWN_TRANSACTION || err == PERMISSION_DENIED) {
        CHECK_INTERFACE(ISurfaceComposer, data, reply);
        if (CC_UNLIKELY(!PermissionCache::checkCallingPermission(sHardwareTest))) {
            IPCThreadState* ipc = IPCThreadState::self();
            const int pid = ipc->getCallingPid();
            const int uid = ipc->getCallingUid();
            ALOGE("Permission Denial: "
                    "can't access SurfaceFlinger pid=%d, uid=%d", pid, uid);
            return PERMISSION_DENIED;
        }
        int n;
        switch (code) {
            case 1000: // SHOW_CPU, NOT SUPPORTED ANYMORE
            case 1001: // SHOW_FPS, NOT SUPPORTED ANYMORE
                return NO_ERROR;
            case 1002:  // SHOW_UPDATES
                n = data.readInt32();
                mDebugRegion = n ? n : (mDebugRegion ? 0 : 1);
                invalidateHwcGeometry();
                repaintEverything();
                return NO_ERROR;
            case 1004:{ // repaint everything
                repaintEverything();
                return NO_ERROR;
            }
            case 1005:{ // force transaction
                setTransactionFlags(
                        eTransactionNeeded|
                        eDisplayTransactionNeeded|
                        eTraversalNeeded);
                return NO_ERROR;
            }
            case 1006:{ // send empty update
                signalRefresh();
                return NO_ERROR;
            }
            case 1008:  // toggle use of hw composer
                n = data.readInt32();
                mDebugDisableHWC = n ? 1 : 0;
                invalidateHwcGeometry();
                repaintEverything();
                return NO_ERROR;
            case 1009:  // toggle use of transform hint
                n = data.readInt32();
                mDebugDisableTransformHint = n ? 1 : 0;
                invalidateHwcGeometry();
                repaintEverything();
                return NO_ERROR;
            case 1010:  // interrogate.
                reply->writeInt32(0);
                reply->writeInt32(0);
                reply->writeInt32(mDebugRegion);
                reply->writeInt32(0);
                reply->writeInt32(mDebugDisableHWC);
                return NO_ERROR;
            case 1013: {
                Mutex::Autolock _l(mStateLock);
                sp<const DisplayDevice> hw(getDefaultDisplayDevice());
                reply->writeInt32(hw->getPageFlipCount());
            }
            return NO_ERROR;
        }
    }
    return err;
}

void SurfaceFlinger::repaintEverything() {
    android_atomic_or(1, &mRepaintEverything);
    signalTransaction();
}

// ---------------------------------------------------------------------------

status_t SurfaceFlinger::renderScreenToTexture(uint32_t layerStack,
        GLuint* textureName, GLfloat* uOut, GLfloat* vOut)
{
    Mutex::Autolock _l(mStateLock);
    return renderScreenToTextureLocked(layerStack, textureName, uOut, vOut);
}

status_t SurfaceFlinger::renderScreenToTextureLocked(uint32_t layerStack,
        GLuint* textureName, GLfloat* uOut, GLfloat* vOut)
{
    ATRACE_CALL();

    if (!GLExtensions::getInstance().haveFramebufferObject())
        return INVALID_OPERATION;

    // get screen geometry
    // FIXME: figure out what it means to have a screenshot texture w/ multi-display
    sp<const DisplayDevice> hw(getDefaultDisplayDevice());
    const uint32_t hw_w = hw->getWidth();
    const uint32_t hw_h = hw->getHeight();
    GLfloat u = 1;
    GLfloat v = 1;

    // make sure to clear all GL error flags
    while ( glGetError() != GL_NO_ERROR ) ;

    // create a FBO
    GLuint name, tname;
    glGenTextures(1, &tname);
    glBindTexture(GL_TEXTURE_2D, tname);
    glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
    glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
    glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB,
            hw_w, hw_h, 0, GL_RGB, GL_UNSIGNED_BYTE, 0);
    if (glGetError() != GL_NO_ERROR) {
        while ( glGetError() != GL_NO_ERROR ) ;
        GLint tw = (2 << (31 - clz(hw_w)));
        GLint th = (2 << (31 - clz(hw_h)));
        glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB,
                tw, th, 0, GL_RGB, GL_UNSIGNED_BYTE, 0);
        u = GLfloat(hw_w) / tw;
        v = GLfloat(hw_h) / th;
    }
    glGenFramebuffersOES(1, &name);
    glBindFramebufferOES(GL_FRAMEBUFFER_OES, name);
    glFramebufferTexture2DOES(GL_FRAMEBUFFER_OES,
            GL_COLOR_ATTACHMENT0_OES, GL_TEXTURE_2D, tname, 0);

    DisplayDevice::setViewportAndProjection(hw);

    // redraw the screen entirely...
    glDisable(GL_TEXTURE_EXTERNAL_OES);
    glDisable(GL_TEXTURE_2D);
    glClearColor(0,0,0,1);
    glClear(GL_COLOR_BUFFER_BIT);
    glMatrixMode(GL_MODELVIEW);
    glLoadIdentity();
    const Vector< sp<LayerBase> >& layers(hw->getVisibleLayersSortedByZ());
    const size_t count = layers.size();
    for (size_t i=0 ; i<count ; ++i) {
        const sp<LayerBase>& layer(layers[i]);
        layer->draw(hw);
    }

    hw->compositionComplete();

    // back to main framebuffer
    glBindFramebufferOES(GL_FRAMEBUFFER_OES, 0);
    glDeleteFramebuffersOES(1, &name);

    *textureName = tname;
    *uOut = u;
    *vOut = v;
    return NO_ERROR;
}

// ---------------------------------------------------------------------------

status_t SurfaceFlinger::captureScreenImplLocked(const sp<IBinder>& display,
        sp<IMemoryHeap>* heap,
        uint32_t* w, uint32_t* h, PixelFormat* f,
        uint32_t sw, uint32_t sh,
        uint32_t minLayerZ, uint32_t maxLayerZ)
{
    ATRACE_CALL();

    status_t result = PERMISSION_DENIED;

    if (!GLExtensions::getInstance().haveFramebufferObject()) {
        return INVALID_OPERATION;
    }

    // get screen geometry
    sp<const DisplayDevice> hw(getDisplayDevice(display));
    const uint32_t hw_w = hw->getWidth();
    const uint32_t hw_h = hw->getHeight();

    // if we have secure windows on this display, never allow the screen capture
    if (hw->getSecureLayerVisible()) {
        ALOGW("FB is protected: PERMISSION_DENIED");
        return PERMISSION_DENIED;
    }

    if ((sw > hw_w) || (sh > hw_h)) {
        ALOGE("size mismatch (%d, %d) > (%d, %d)", sw, sh, hw_w, hw_h);
        return BAD_VALUE;
    }

    sw = (!sw) ? hw_w : sw;
    sh = (!sh) ? hw_h : sh;
    const size_t size = sw * sh * 4;
    const bool filtering = sw != hw_w || sh != hw_h;

//    ALOGD("screenshot: sw=%d, sh=%d, minZ=%d, maxZ=%d",
//            sw, sh, minLayerZ, maxLayerZ);

    // make sure to clear all GL error flags
    while ( glGetError() != GL_NO_ERROR ) ;

    // create a FBO
    GLuint name, tname;
    glGenRenderbuffersOES(1, &tname);
    glBindRenderbufferOES(GL_RENDERBUFFER_OES, tname);
    glRenderbufferStorageOES(GL_RENDERBUFFER_OES, GL_RGBA8_OES, sw, sh);

    glGenFramebuffersOES(1, &name);
    glBindFramebufferOES(GL_FRAMEBUFFER_OES, name);
    glFramebufferRenderbufferOES(GL_FRAMEBUFFER_OES,
            GL_COLOR_ATTACHMENT0_OES, GL_RENDERBUFFER_OES, tname);

    GLenum status = glCheckFramebufferStatusOES(GL_FRAMEBUFFER_OES);

    if (status == GL_FRAMEBUFFER_COMPLETE_OES) {

        // invert everything, b/c glReadPixel() below will invert the FB
        GLint  viewport[4];
        glGetIntegerv(GL_VIEWPORT, viewport);
        glViewport(0, 0, sw, sh);
        glMatrixMode(GL_PROJECTION);
        glPushMatrix();
        glLoadIdentity();
        glOrthof(0, hw_w, hw_h, 0, 0, 1);
        glMatrixMode(GL_MODELVIEW);

        // redraw the screen entirely...
        glClearColor(0,0,0,1);
        glClear(GL_COLOR_BUFFER_BIT);

        const Vector< sp<LayerBase> >& layers(hw->getVisibleLayersSortedByZ());
        const size_t count = layers.size();
        for (size_t i=0 ; i<count ; ++i) {
            const sp<LayerBase>& layer(layers[i]);
            const uint32_t z = layer->drawingState().z;
            if (z >= minLayerZ && z <= maxLayerZ) {
                if (filtering) layer->setFiltering(true);
                layer->draw(hw);
                if (filtering) layer->setFiltering(false);
            }
        }

        // check for errors and return screen capture
        if (glGetError() != GL_NO_ERROR) {
            // error while rendering
            result = INVALID_OPERATION;
        } else {
            // allocate shared memory large enough to hold the
            // screen capture
            sp<MemoryHeapBase> base(
                    new MemoryHeapBase(size, 0, "screen-capture") );
            void* const ptr = base->getBase();
            if (ptr != MAP_FAILED) {
                // capture the screen with glReadPixels()
                ScopedTrace _t(ATRACE_TAG, "glReadPixels");
                glReadPixels(0, 0, sw, sh, GL_RGBA, GL_UNSIGNED_BYTE, ptr);
                if (glGetError() == GL_NO_ERROR) {
                    *heap = base;
                    *w = sw;
                    *h = sh;
                    *f = PIXEL_FORMAT_RGBA_8888;
                    result = NO_ERROR;
                }
            } else {
                result = NO_MEMORY;
            }
        }
        glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
        glMatrixMode(GL_PROJECTION);
        glPopMatrix();
        glMatrixMode(GL_MODELVIEW);
    } else {
        result = BAD_VALUE;
    }

    // release FBO resources
    glBindFramebufferOES(GL_FRAMEBUFFER_OES, 0);
    glDeleteRenderbuffersOES(1, &tname);
    glDeleteFramebuffersOES(1, &name);

    hw->compositionComplete();

//    ALOGD("screenshot: result = %s", result<0 ? strerror(result) : "OK");

    return result;
}


status_t SurfaceFlinger::captureScreen(const sp<IBinder>& display,
        sp<IMemoryHeap>* heap,
        uint32_t* width, uint32_t* height, PixelFormat* format,
        uint32_t sw, uint32_t sh,
        uint32_t minLayerZ, uint32_t maxLayerZ)
{
    if (CC_UNLIKELY(display == 0))
        return BAD_VALUE;

    if (!GLExtensions::getInstance().haveFramebufferObject())
        return INVALID_OPERATION;

    class MessageCaptureScreen : public MessageBase {
        SurfaceFlinger* flinger;
        sp<IBinder> display;
        sp<IMemoryHeap>* heap;
        uint32_t* w;
        uint32_t* h;
        PixelFormat* f;
        uint32_t sw;
        uint32_t sh;
        uint32_t minLayerZ;
        uint32_t maxLayerZ;
        status_t result;
    public:
        MessageCaptureScreen(SurfaceFlinger* flinger, const sp<IBinder>& display,
                sp<IMemoryHeap>* heap, uint32_t* w, uint32_t* h, PixelFormat* f,
                uint32_t sw, uint32_t sh,
                uint32_t minLayerZ, uint32_t maxLayerZ)
            : flinger(flinger), display(display),
              heap(heap), w(w), h(h), f(f), sw(sw), sh(sh),
              minLayerZ(minLayerZ), maxLayerZ(maxLayerZ),
              result(PERMISSION_DENIED)
        {
        }
        status_t getResult() const {
            return result;
        }
        virtual bool handler() {
            Mutex::Autolock _l(flinger->mStateLock);
            result = flinger->captureScreenImplLocked(display,
                    heap, w, h, f, sw, sh, minLayerZ, maxLayerZ);
            return true;
        }
    };

    sp<MessageBase> msg = new MessageCaptureScreen(this,
            display, heap, width, height, format, sw, sh, minLayerZ, maxLayerZ);
    status_t res = postMessageSync(msg);
    if (res == NO_ERROR) {
        res = static_cast<MessageCaptureScreen*>( msg.get() )->getResult();
    }
    return res;
}

// ---------------------------------------------------------------------------

SurfaceFlinger::LayerVector::LayerVector() {
}

SurfaceFlinger::LayerVector::LayerVector(const LayerVector& rhs)
    : SortedVector<sp<LayerBase> >(rhs) {
}

int SurfaceFlinger::LayerVector::do_compare(const void* lhs,
    const void* rhs) const
{
    // sort layers per layer-stack, then by z-order and finally by sequence
    const sp<LayerBase>& l(*reinterpret_cast<const sp<LayerBase>*>(lhs));
    const sp<LayerBase>& r(*reinterpret_cast<const sp<LayerBase>*>(rhs));

    uint32_t ls = l->currentState().layerStack;
    uint32_t rs = r->currentState().layerStack;
    if (ls != rs)
        return ls - rs;

    uint32_t lz = l->currentState().z;
    uint32_t rz = r->currentState().z;
    if (lz != rz)
        return lz - rz;

    return l->sequence - r->sequence;
}

// ---------------------------------------------------------------------------

SurfaceFlinger::DisplayDeviceState::DisplayDeviceState()
    : type(DisplayDevice::DISPLAY_ID_INVALID) {
}

SurfaceFlinger::DisplayDeviceState::DisplayDeviceState(DisplayDevice::DisplayType type)
    : type(type), layerStack(0), orientation(0) {
    viewport.makeInvalid();
    frame.makeInvalid();
}

// ---------------------------------------------------------------------------

}; // namespace android