| /* |
| * Copyright 2023 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "VirtualInputDevice" |
| |
| #include <android-base/logging.h> |
| #include <android/input.h> |
| #include <android/keycodes.h> |
| #include <android_companion_virtualdevice_flags.h> |
| #include <fcntl.h> |
| #include <input/Input.h> |
| #include <input/VirtualInputDevice.h> |
| #include <linux/uinput.h> |
| |
| #include <string> |
| |
| using android::base::unique_fd; |
| |
| namespace { |
| |
| /** |
| * Log debug messages about native virtual input devices. |
| * Enable this via "adb shell setprop log.tag.VirtualInputDevice DEBUG" |
| */ |
| bool isDebug() { |
| return __android_log_is_loggable(ANDROID_LOG_DEBUG, LOG_TAG, ANDROID_LOG_INFO); |
| } |
| |
| unique_fd invalidFd() { |
| return unique_fd(-1); |
| } |
| |
| } // namespace |
| |
| namespace android { |
| |
| namespace vd_flags = android::companion::virtualdevice::flags; |
| |
| /** Creates a new uinput device and assigns a file descriptor. */ |
| unique_fd openUinput(const char* readableName, int32_t vendorId, int32_t productId, |
| const char* phys, DeviceType deviceType, int32_t screenHeight, |
| int32_t screenWidth) { |
| unique_fd fd(TEMP_FAILURE_RETRY(::open("/dev/uinput", O_WRONLY | O_NONBLOCK))); |
| if (fd < 0) { |
| ALOGE("Error creating uinput device: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| |
| ioctl(fd, UI_SET_PHYS, phys); |
| |
| ioctl(fd, UI_SET_EVBIT, EV_KEY); |
| ioctl(fd, UI_SET_EVBIT, EV_SYN); |
| switch (deviceType) { |
| case DeviceType::DPAD: |
| for (const auto& [_, keyCode] : VirtualDpad::DPAD_KEY_CODE_MAPPING) { |
| ioctl(fd, UI_SET_KEYBIT, keyCode); |
| } |
| break; |
| case DeviceType::KEYBOARD: |
| for (const auto& [_, keyCode] : VirtualKeyboard::KEY_CODE_MAPPING) { |
| ioctl(fd, UI_SET_KEYBIT, keyCode); |
| } |
| break; |
| case DeviceType::MOUSE: |
| ioctl(fd, UI_SET_EVBIT, EV_REL); |
| ioctl(fd, UI_SET_KEYBIT, BTN_LEFT); |
| ioctl(fd, UI_SET_KEYBIT, BTN_RIGHT); |
| ioctl(fd, UI_SET_KEYBIT, BTN_MIDDLE); |
| ioctl(fd, UI_SET_KEYBIT, BTN_BACK); |
| ioctl(fd, UI_SET_KEYBIT, BTN_FORWARD); |
| ioctl(fd, UI_SET_RELBIT, REL_X); |
| ioctl(fd, UI_SET_RELBIT, REL_Y); |
| ioctl(fd, UI_SET_RELBIT, REL_WHEEL); |
| ioctl(fd, UI_SET_RELBIT, REL_HWHEEL); |
| if (vd_flags::high_resolution_scroll()) { |
| ioctl(fd, UI_SET_RELBIT, REL_WHEEL_HI_RES); |
| ioctl(fd, UI_SET_RELBIT, REL_HWHEEL_HI_RES); |
| } |
| break; |
| case DeviceType::TOUCHSCREEN: |
| ioctl(fd, UI_SET_EVBIT, EV_ABS); |
| ioctl(fd, UI_SET_KEYBIT, BTN_TOUCH); |
| ioctl(fd, UI_SET_ABSBIT, ABS_MT_SLOT); |
| ioctl(fd, UI_SET_ABSBIT, ABS_MT_POSITION_X); |
| ioctl(fd, UI_SET_ABSBIT, ABS_MT_POSITION_Y); |
| ioctl(fd, UI_SET_ABSBIT, ABS_MT_TRACKING_ID); |
| ioctl(fd, UI_SET_ABSBIT, ABS_MT_TOOL_TYPE); |
| ioctl(fd, UI_SET_ABSBIT, ABS_MT_TOUCH_MAJOR); |
| ioctl(fd, UI_SET_ABSBIT, ABS_MT_PRESSURE); |
| ioctl(fd, UI_SET_PROPBIT, INPUT_PROP_DIRECT); |
| break; |
| case DeviceType::STYLUS: |
| ioctl(fd, UI_SET_EVBIT, EV_ABS); |
| ioctl(fd, UI_SET_KEYBIT, BTN_TOUCH); |
| ioctl(fd, UI_SET_KEYBIT, BTN_STYLUS); |
| ioctl(fd, UI_SET_KEYBIT, BTN_STYLUS2); |
| ioctl(fd, UI_SET_KEYBIT, BTN_TOOL_PEN); |
| ioctl(fd, UI_SET_KEYBIT, BTN_TOOL_RUBBER); |
| ioctl(fd, UI_SET_ABSBIT, ABS_X); |
| ioctl(fd, UI_SET_ABSBIT, ABS_Y); |
| ioctl(fd, UI_SET_ABSBIT, ABS_TILT_X); |
| ioctl(fd, UI_SET_ABSBIT, ABS_TILT_Y); |
| ioctl(fd, UI_SET_ABSBIT, ABS_PRESSURE); |
| ioctl(fd, UI_SET_PROPBIT, INPUT_PROP_DIRECT); |
| break; |
| case DeviceType::ROTARY_ENCODER: |
| ioctl(fd, UI_SET_EVBIT, EV_REL); |
| ioctl(fd, UI_SET_RELBIT, REL_WHEEL); |
| if (vd_flags::high_resolution_scroll()) { |
| ioctl(fd, UI_SET_RELBIT, REL_WHEEL_HI_RES); |
| } |
| break; |
| default: |
| ALOGE("Invalid input device type %d", static_cast<int32_t>(deviceType)); |
| return invalidFd(); |
| } |
| |
| int version; |
| if (ioctl(fd, UI_GET_VERSION, &version) == 0 && version >= 5) { |
| uinput_setup setup; |
| memset(&setup, 0, sizeof(setup)); |
| std::strncpy(setup.name, readableName, UINPUT_MAX_NAME_SIZE); |
| setup.id.version = 1; |
| setup.id.bustype = BUS_VIRTUAL; |
| setup.id.vendor = vendorId; |
| setup.id.product = productId; |
| if (deviceType == DeviceType::TOUCHSCREEN) { |
| uinput_abs_setup xAbsSetup; |
| xAbsSetup.code = ABS_MT_POSITION_X; |
| xAbsSetup.absinfo.maximum = screenWidth - 1; |
| xAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &xAbsSetup) != 0) { |
| ALOGE("Error creating touchscreen uinput x axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup yAbsSetup; |
| yAbsSetup.code = ABS_MT_POSITION_Y; |
| yAbsSetup.absinfo.maximum = screenHeight - 1; |
| yAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &yAbsSetup) != 0) { |
| ALOGE("Error creating touchscreen uinput y axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup majorAbsSetup; |
| majorAbsSetup.code = ABS_MT_TOUCH_MAJOR; |
| majorAbsSetup.absinfo.maximum = screenWidth - 1; |
| majorAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &majorAbsSetup) != 0) { |
| ALOGE("Error creating touchscreen uinput major axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup pressureAbsSetup; |
| pressureAbsSetup.code = ABS_MT_PRESSURE; |
| pressureAbsSetup.absinfo.maximum = 255; |
| pressureAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &pressureAbsSetup) != 0) { |
| ALOGE("Error creating touchscreen uinput pressure axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup slotAbsSetup; |
| slotAbsSetup.code = ABS_MT_SLOT; |
| slotAbsSetup.absinfo.maximum = MAX_POINTERS - 1; |
| slotAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &slotAbsSetup) != 0) { |
| ALOGE("Error creating touchscreen uinput slots: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup trackingIdAbsSetup; |
| trackingIdAbsSetup.code = ABS_MT_TRACKING_ID; |
| trackingIdAbsSetup.absinfo.maximum = MAX_POINTERS - 1; |
| trackingIdAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &trackingIdAbsSetup) != 0) { |
| ALOGE("Error creating touchscreen uinput tracking ids: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| } else if (deviceType == DeviceType::STYLUS) { |
| uinput_abs_setup xAbsSetup; |
| xAbsSetup.code = ABS_X; |
| xAbsSetup.absinfo.maximum = screenWidth - 1; |
| xAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &xAbsSetup) != 0) { |
| ALOGE("Error creating stylus uinput x axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup yAbsSetup; |
| yAbsSetup.code = ABS_Y; |
| yAbsSetup.absinfo.maximum = screenHeight - 1; |
| yAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &yAbsSetup) != 0) { |
| ALOGE("Error creating stylus uinput y axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup tiltXAbsSetup; |
| tiltXAbsSetup.code = ABS_TILT_X; |
| tiltXAbsSetup.absinfo.maximum = 90; |
| tiltXAbsSetup.absinfo.minimum = -90; |
| if (ioctl(fd, UI_ABS_SETUP, &tiltXAbsSetup) != 0) { |
| ALOGE("Error creating stylus uinput tilt x axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup tiltYAbsSetup; |
| tiltYAbsSetup.code = ABS_TILT_Y; |
| tiltYAbsSetup.absinfo.maximum = 90; |
| tiltYAbsSetup.absinfo.minimum = -90; |
| if (ioctl(fd, UI_ABS_SETUP, &tiltYAbsSetup) != 0) { |
| ALOGE("Error creating stylus uinput tilt y axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| uinput_abs_setup pressureAbsSetup; |
| pressureAbsSetup.code = ABS_PRESSURE; |
| pressureAbsSetup.absinfo.maximum = 255; |
| pressureAbsSetup.absinfo.minimum = 0; |
| if (ioctl(fd, UI_ABS_SETUP, &pressureAbsSetup) != 0) { |
| ALOGE("Error creating touchscreen uinput pressure axis: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| } |
| if (ioctl(fd, UI_DEV_SETUP, &setup) != 0) { |
| ALOGE("Error creating uinput device: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| } else { |
| // UI_DEV_SETUP was not introduced until version 5. Try setting up manually. |
| ALOGI("Falling back to version %d manual setup", version); |
| uinput_user_dev fallback; |
| memset(&fallback, 0, sizeof(fallback)); |
| std::strncpy(fallback.name, readableName, UINPUT_MAX_NAME_SIZE); |
| fallback.id.version = 1; |
| fallback.id.bustype = BUS_VIRTUAL; |
| fallback.id.vendor = vendorId; |
| fallback.id.product = productId; |
| if (deviceType == DeviceType::TOUCHSCREEN) { |
| fallback.absmin[ABS_MT_POSITION_X] = 0; |
| fallback.absmax[ABS_MT_POSITION_X] = screenWidth - 1; |
| fallback.absmin[ABS_MT_POSITION_Y] = 0; |
| fallback.absmax[ABS_MT_POSITION_Y] = screenHeight - 1; |
| fallback.absmin[ABS_MT_TOUCH_MAJOR] = 0; |
| fallback.absmax[ABS_MT_TOUCH_MAJOR] = screenWidth - 1; |
| fallback.absmin[ABS_MT_PRESSURE] = 0; |
| fallback.absmax[ABS_MT_PRESSURE] = 255; |
| } else if (deviceType == DeviceType::STYLUS) { |
| fallback.absmin[ABS_X] = 0; |
| fallback.absmax[ABS_X] = screenWidth - 1; |
| fallback.absmin[ABS_Y] = 0; |
| fallback.absmax[ABS_Y] = screenHeight - 1; |
| fallback.absmin[ABS_TILT_X] = -90; |
| fallback.absmax[ABS_TILT_X] = 90; |
| fallback.absmin[ABS_TILT_Y] = -90; |
| fallback.absmax[ABS_TILT_Y] = 90; |
| fallback.absmin[ABS_PRESSURE] = 0; |
| fallback.absmax[ABS_PRESSURE] = 255; |
| } |
| if (TEMP_FAILURE_RETRY(write(fd, &fallback, sizeof(fallback))) != sizeof(fallback)) { |
| ALOGE("Error creating uinput device: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| } |
| |
| if (ioctl(fd, UI_DEV_CREATE) != 0) { |
| ALOGE("Error creating uinput device: %s", strerror(errno)); |
| return invalidFd(); |
| } |
| |
| return fd; |
| } |
| |
| VirtualInputDevice::VirtualInputDevice(unique_fd fd) : mFd(std::move(fd)) {} |
| |
| VirtualInputDevice::~VirtualInputDevice() { |
| ioctl(mFd, UI_DEV_DESTROY); |
| } |
| |
| bool VirtualInputDevice::writeInputEvent(uint16_t type, uint16_t code, int32_t value, |
| std::chrono::nanoseconds eventTime) { |
| std::chrono::seconds seconds = std::chrono::duration_cast<std::chrono::seconds>(eventTime); |
| std::chrono::microseconds microseconds = |
| std::chrono::duration_cast<std::chrono::microseconds>(eventTime - seconds); |
| struct input_event ev = {.type = type, .code = code, .value = value}; |
| ev.input_event_sec = static_cast<decltype(ev.input_event_sec)>(seconds.count()); |
| ev.input_event_usec = static_cast<decltype(ev.input_event_usec)>(microseconds.count()); |
| |
| return TEMP_FAILURE_RETRY(write(mFd, &ev, sizeof(struct input_event))) == sizeof(ev); |
| } |
| |
| /** Utility method to write keyboard key events or mouse/stylus button events. */ |
| bool VirtualInputDevice::writeEvKeyEvent(int32_t androidCode, int32_t androidAction, |
| const std::map<int, int>& evKeyCodeMapping, |
| const std::map<int, UinputAction>& actionMapping, |
| std::chrono::nanoseconds eventTime) { |
| auto evKeyCodeIterator = evKeyCodeMapping.find(androidCode); |
| if (evKeyCodeIterator == evKeyCodeMapping.end()) { |
| ALOGE("Unsupported native EV keycode for android code %d", androidCode); |
| return false; |
| } |
| auto actionIterator = actionMapping.find(androidAction); |
| if (actionIterator == actionMapping.end()) { |
| ALOGE("Unsupported native action for android action %d", androidAction); |
| return false; |
| } |
| int32_t action = static_cast<int32_t>(actionIterator->second); |
| uint16_t evKeyCode = static_cast<uint16_t>(evKeyCodeIterator->second); |
| if (!writeInputEvent(EV_KEY, evKeyCode, action, eventTime)) { |
| ALOGE("Failed to write native action %d and EV keycode %u.", action, evKeyCode); |
| return false; |
| } |
| if (!writeInputEvent(EV_SYN, SYN_REPORT, 0, eventTime)) { |
| ALOGE("Failed to write SYN_REPORT for EV_KEY event."); |
| return false; |
| } |
| return true; |
| } |
| |
| // --- VirtualKeyboard --- |
| const std::map<int, UinputAction> VirtualKeyboard::KEY_ACTION_MAPPING = { |
| {AKEY_EVENT_ACTION_DOWN, UinputAction::PRESS}, |
| {AKEY_EVENT_ACTION_UP, UinputAction::RELEASE}, |
| }; |
| |
| // Keycode mapping from https://source.android.com/devices/input/keyboard-devices |
| const std::map<int, int> VirtualKeyboard::KEY_CODE_MAPPING = { |
| {AKEYCODE_0, KEY_0}, |
| {AKEYCODE_1, KEY_1}, |
| {AKEYCODE_2, KEY_2}, |
| {AKEYCODE_3, KEY_3}, |
| {AKEYCODE_4, KEY_4}, |
| {AKEYCODE_5, KEY_5}, |
| {AKEYCODE_6, KEY_6}, |
| {AKEYCODE_7, KEY_7}, |
| {AKEYCODE_8, KEY_8}, |
| {AKEYCODE_9, KEY_9}, |
| {AKEYCODE_A, KEY_A}, |
| {AKEYCODE_B, KEY_B}, |
| {AKEYCODE_C, KEY_C}, |
| {AKEYCODE_D, KEY_D}, |
| {AKEYCODE_E, KEY_E}, |
| {AKEYCODE_F, KEY_F}, |
| {AKEYCODE_G, KEY_G}, |
| {AKEYCODE_H, KEY_H}, |
| {AKEYCODE_I, KEY_I}, |
| {AKEYCODE_J, KEY_J}, |
| {AKEYCODE_K, KEY_K}, |
| {AKEYCODE_L, KEY_L}, |
| {AKEYCODE_M, KEY_M}, |
| {AKEYCODE_N, KEY_N}, |
| {AKEYCODE_O, KEY_O}, |
| {AKEYCODE_P, KEY_P}, |
| {AKEYCODE_Q, KEY_Q}, |
| {AKEYCODE_R, KEY_R}, |
| {AKEYCODE_S, KEY_S}, |
| {AKEYCODE_T, KEY_T}, |
| {AKEYCODE_U, KEY_U}, |
| {AKEYCODE_V, KEY_V}, |
| {AKEYCODE_W, KEY_W}, |
| {AKEYCODE_X, KEY_X}, |
| {AKEYCODE_Y, KEY_Y}, |
| {AKEYCODE_Z, KEY_Z}, |
| {AKEYCODE_GRAVE, KEY_GRAVE}, |
| {AKEYCODE_MINUS, KEY_MINUS}, |
| {AKEYCODE_EQUALS, KEY_EQUAL}, |
| {AKEYCODE_LEFT_BRACKET, KEY_LEFTBRACE}, |
| {AKEYCODE_RIGHT_BRACKET, KEY_RIGHTBRACE}, |
| {AKEYCODE_BACKSLASH, KEY_BACKSLASH}, |
| {AKEYCODE_SEMICOLON, KEY_SEMICOLON}, |
| {AKEYCODE_APOSTROPHE, KEY_APOSTROPHE}, |
| {AKEYCODE_COMMA, KEY_COMMA}, |
| {AKEYCODE_PERIOD, KEY_DOT}, |
| {AKEYCODE_SLASH, KEY_SLASH}, |
| {AKEYCODE_ALT_LEFT, KEY_LEFTALT}, |
| {AKEYCODE_ALT_RIGHT, KEY_RIGHTALT}, |
| {AKEYCODE_CTRL_LEFT, KEY_LEFTCTRL}, |
| {AKEYCODE_CTRL_RIGHT, KEY_RIGHTCTRL}, |
| {AKEYCODE_SHIFT_LEFT, KEY_LEFTSHIFT}, |
| {AKEYCODE_SHIFT_RIGHT, KEY_RIGHTSHIFT}, |
| {AKEYCODE_META_LEFT, KEY_LEFTMETA}, |
| {AKEYCODE_META_RIGHT, KEY_RIGHTMETA}, |
| {AKEYCODE_CAPS_LOCK, KEY_CAPSLOCK}, |
| {AKEYCODE_SCROLL_LOCK, KEY_SCROLLLOCK}, |
| {AKEYCODE_NUM_LOCK, KEY_NUMLOCK}, |
| {AKEYCODE_ENTER, KEY_ENTER}, |
| {AKEYCODE_TAB, KEY_TAB}, |
| {AKEYCODE_SPACE, KEY_SPACE}, |
| {AKEYCODE_DPAD_DOWN, KEY_DOWN}, |
| {AKEYCODE_DPAD_UP, KEY_UP}, |
| {AKEYCODE_DPAD_LEFT, KEY_LEFT}, |
| {AKEYCODE_DPAD_RIGHT, KEY_RIGHT}, |
| {AKEYCODE_MOVE_END, KEY_END}, |
| {AKEYCODE_MOVE_HOME, KEY_HOME}, |
| {AKEYCODE_PAGE_DOWN, KEY_PAGEDOWN}, |
| {AKEYCODE_PAGE_UP, KEY_PAGEUP}, |
| {AKEYCODE_DEL, KEY_BACKSPACE}, |
| {AKEYCODE_FORWARD_DEL, KEY_DELETE}, |
| {AKEYCODE_INSERT, KEY_INSERT}, |
| {AKEYCODE_ESCAPE, KEY_ESC}, |
| {AKEYCODE_BREAK, KEY_PAUSE}, |
| {AKEYCODE_F1, KEY_F1}, |
| {AKEYCODE_F2, KEY_F2}, |
| {AKEYCODE_F3, KEY_F3}, |
| {AKEYCODE_F4, KEY_F4}, |
| {AKEYCODE_F5, KEY_F5}, |
| {AKEYCODE_F6, KEY_F6}, |
| {AKEYCODE_F7, KEY_F7}, |
| {AKEYCODE_F8, KEY_F8}, |
| {AKEYCODE_F9, KEY_F9}, |
| {AKEYCODE_F10, KEY_F10}, |
| {AKEYCODE_F11, KEY_F11}, |
| {AKEYCODE_F12, KEY_F12}, |
| {AKEYCODE_BACK, KEY_BACK}, |
| {AKEYCODE_FORWARD, KEY_FORWARD}, |
| {AKEYCODE_NUMPAD_1, KEY_KP1}, |
| {AKEYCODE_NUMPAD_2, KEY_KP2}, |
| {AKEYCODE_NUMPAD_3, KEY_KP3}, |
| {AKEYCODE_NUMPAD_4, KEY_KP4}, |
| {AKEYCODE_NUMPAD_5, KEY_KP5}, |
| {AKEYCODE_NUMPAD_6, KEY_KP6}, |
| {AKEYCODE_NUMPAD_7, KEY_KP7}, |
| {AKEYCODE_NUMPAD_8, KEY_KP8}, |
| {AKEYCODE_NUMPAD_9, KEY_KP9}, |
| {AKEYCODE_NUMPAD_0, KEY_KP0}, |
| {AKEYCODE_NUMPAD_ADD, KEY_KPPLUS}, |
| {AKEYCODE_NUMPAD_SUBTRACT, KEY_KPMINUS}, |
| {AKEYCODE_NUMPAD_MULTIPLY, KEY_KPASTERISK}, |
| {AKEYCODE_NUMPAD_DIVIDE, KEY_KPSLASH}, |
| {AKEYCODE_NUMPAD_DOT, KEY_KPDOT}, |
| {AKEYCODE_NUMPAD_ENTER, KEY_KPENTER}, |
| {AKEYCODE_NUMPAD_EQUALS, KEY_KPEQUAL}, |
| {AKEYCODE_NUMPAD_COMMA, KEY_KPCOMMA}, |
| {AKEYCODE_LANGUAGE_SWITCH, KEY_LANGUAGE}, |
| }; |
| |
| VirtualKeyboard::VirtualKeyboard(unique_fd fd) : VirtualInputDevice(std::move(fd)) {} |
| |
| VirtualKeyboard::~VirtualKeyboard() {} |
| |
| bool VirtualKeyboard::writeKeyEvent(int32_t androidKeyCode, int32_t androidAction, |
| std::chrono::nanoseconds eventTime) { |
| return writeEvKeyEvent(androidKeyCode, androidAction, KEY_CODE_MAPPING, KEY_ACTION_MAPPING, |
| eventTime); |
| } |
| |
| // --- VirtualDpad --- |
| // Dpad keycode mapping from https://source.android.com/devices/input/keyboard-devices |
| const std::map<int, int> VirtualDpad::DPAD_KEY_CODE_MAPPING = { |
| // clang-format off |
| {AKEYCODE_DPAD_DOWN, KEY_DOWN}, |
| {AKEYCODE_DPAD_UP, KEY_UP}, |
| {AKEYCODE_DPAD_LEFT, KEY_LEFT}, |
| {AKEYCODE_DPAD_RIGHT, KEY_RIGHT}, |
| {AKEYCODE_DPAD_CENTER, KEY_SELECT}, |
| {AKEYCODE_BACK, KEY_BACK}, |
| // clang-format on |
| }; |
| |
| VirtualDpad::VirtualDpad(unique_fd fd) : VirtualInputDevice(std::move(fd)) {} |
| |
| VirtualDpad::~VirtualDpad() {} |
| |
| bool VirtualDpad::writeDpadKeyEvent(int32_t androidKeyCode, int32_t androidAction, |
| std::chrono::nanoseconds eventTime) { |
| return writeEvKeyEvent(androidKeyCode, androidAction, DPAD_KEY_CODE_MAPPING, |
| VirtualKeyboard::KEY_ACTION_MAPPING, eventTime); |
| } |
| |
| // --- VirtualMouse --- |
| const std::map<int, UinputAction> VirtualMouse::BUTTON_ACTION_MAPPING = { |
| {AMOTION_EVENT_ACTION_BUTTON_PRESS, UinputAction::PRESS}, |
| {AMOTION_EVENT_ACTION_BUTTON_RELEASE, UinputAction::RELEASE}, |
| }; |
| |
| // Button code mapping from https://source.android.com/devices/input/touch-devices |
| const std::map<int, int> VirtualMouse::BUTTON_CODE_MAPPING = { |
| // clang-format off |
| {AMOTION_EVENT_BUTTON_PRIMARY, BTN_LEFT}, |
| {AMOTION_EVENT_BUTTON_SECONDARY, BTN_RIGHT}, |
| {AMOTION_EVENT_BUTTON_TERTIARY, BTN_MIDDLE}, |
| {AMOTION_EVENT_BUTTON_BACK, BTN_BACK}, |
| {AMOTION_EVENT_BUTTON_FORWARD, BTN_FORWARD}, |
| // clang-format on |
| }; |
| |
| VirtualMouse::VirtualMouse(unique_fd fd) |
| : VirtualInputDevice(std::move(fd)), |
| mAccumulatedHighResScrollX(0), |
| mAccumulatedHighResScrollY(0) {} |
| |
| VirtualMouse::~VirtualMouse() {} |
| |
| bool VirtualMouse::writeButtonEvent(int32_t androidButtonCode, int32_t androidAction, |
| std::chrono::nanoseconds eventTime) { |
| return writeEvKeyEvent(androidButtonCode, androidAction, BUTTON_CODE_MAPPING, |
| BUTTON_ACTION_MAPPING, eventTime); |
| } |
| |
| bool VirtualMouse::writeRelativeEvent(float relativeX, float relativeY, |
| std::chrono::nanoseconds eventTime) { |
| return writeInputEvent(EV_REL, REL_X, relativeX, eventTime) && |
| writeInputEvent(EV_REL, REL_Y, relativeY, eventTime) && |
| writeInputEvent(EV_SYN, SYN_REPORT, 0, eventTime); |
| } |
| |
| bool VirtualMouse::writeScrollEvent(float xAxisMovement, float yAxisMovement, |
| std::chrono::nanoseconds eventTime) { |
| if (!vd_flags::high_resolution_scroll()) { |
| return writeInputEvent(EV_REL, REL_HWHEEL, static_cast<int32_t>(xAxisMovement), |
| eventTime) && |
| writeInputEvent(EV_REL, REL_WHEEL, static_cast<int32_t>(yAxisMovement), |
| eventTime) && |
| writeInputEvent(EV_SYN, SYN_REPORT, 0, eventTime); |
| } |
| |
| const auto highResScrollX = |
| static_cast<int32_t>(xAxisMovement * kEvdevHighResScrollUnitsPerDetent); |
| const auto highResScrollY = |
| static_cast<int32_t>(yAxisMovement * kEvdevHighResScrollUnitsPerDetent); |
| bool highResScrollResult = |
| writeInputEvent(EV_REL, REL_HWHEEL_HI_RES, highResScrollX, eventTime) && |
| writeInputEvent(EV_REL, REL_WHEEL_HI_RES, highResScrollY, eventTime); |
| if (!highResScrollResult) { |
| return false; |
| } |
| |
| // According to evdev spec, a high-resolution mouse needs to emit REL_WHEEL / REL_HWHEEL events |
| // in addition to high-res scroll events. Regular scroll events can approximate high-res scroll |
| // events, so we send a regular scroll event when the accumulated scroll motion reaches a detent |
| // (single mouse wheel click). |
| mAccumulatedHighResScrollX += highResScrollX; |
| mAccumulatedHighResScrollY += highResScrollY; |
| const int32_t scrollX = mAccumulatedHighResScrollX / kEvdevHighResScrollUnitsPerDetent; |
| const int32_t scrollY = mAccumulatedHighResScrollY / kEvdevHighResScrollUnitsPerDetent; |
| if (scrollX != 0) { |
| if (!writeInputEvent(EV_REL, REL_HWHEEL, scrollX, eventTime)) { |
| return false; |
| } |
| mAccumulatedHighResScrollX %= kEvdevHighResScrollUnitsPerDetent; |
| } |
| if (scrollY != 0) { |
| if (!writeInputEvent(EV_REL, REL_WHEEL, scrollY, eventTime)) { |
| return false; |
| } |
| mAccumulatedHighResScrollY %= kEvdevHighResScrollUnitsPerDetent; |
| } |
| |
| return writeInputEvent(EV_SYN, SYN_REPORT, 0, eventTime); |
| } |
| |
| // --- VirtualTouchscreen --- |
| const std::map<int, UinputAction> VirtualTouchscreen::TOUCH_ACTION_MAPPING = { |
| {AMOTION_EVENT_ACTION_DOWN, UinputAction::PRESS}, |
| {AMOTION_EVENT_ACTION_UP, UinputAction::RELEASE}, |
| {AMOTION_EVENT_ACTION_MOVE, UinputAction::MOVE}, |
| {AMOTION_EVENT_ACTION_CANCEL, UinputAction::CANCEL}, |
| }; |
| |
| // Tool type mapping from https://source.android.com/devices/input/touch-devices |
| const std::map<int, int> VirtualTouchscreen::TOOL_TYPE_MAPPING = { |
| {AMOTION_EVENT_TOOL_TYPE_FINGER, MT_TOOL_FINGER}, |
| {AMOTION_EVENT_TOOL_TYPE_PALM, MT_TOOL_PALM}, |
| }; |
| |
| VirtualTouchscreen::VirtualTouchscreen(unique_fd fd) : VirtualInputDevice(std::move(fd)) {} |
| |
| VirtualTouchscreen::~VirtualTouchscreen() {} |
| |
| bool VirtualTouchscreen::isValidPointerId(int32_t pointerId, UinputAction uinputAction) { |
| if (pointerId < -1 || pointerId >= (int)MAX_POINTERS) { |
| ALOGE("Virtual touch event has invalid pointer id %d; value must be between -1 and %zu", |
| pointerId, MAX_POINTERS - 0); |
| return false; |
| } |
| |
| if (uinputAction == UinputAction::PRESS && mActivePointers.test(pointerId)) { |
| ALOGE("Repetitive action DOWN event received on a pointer %d that is already down.", |
| pointerId); |
| return false; |
| } |
| if (uinputAction == UinputAction::RELEASE && !mActivePointers.test(pointerId)) { |
| ALOGE("PointerId %d action UP received with no prior action DOWN on touchscreen %d.", |
| pointerId, mFd.get()); |
| return false; |
| } |
| return true; |
| } |
| |
| bool VirtualTouchscreen::writeTouchEvent(int32_t pointerId, int32_t toolType, int32_t action, |
| float locationX, float locationY, float pressure, |
| float majorAxisSize, std::chrono::nanoseconds eventTime) { |
| auto actionIterator = TOUCH_ACTION_MAPPING.find(action); |
| if (actionIterator == TOUCH_ACTION_MAPPING.end()) { |
| return false; |
| } |
| UinputAction uinputAction = actionIterator->second; |
| if (!isValidPointerId(pointerId, uinputAction)) { |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_MT_SLOT, pointerId, eventTime)) { |
| return false; |
| } |
| auto toolTypeIterator = TOOL_TYPE_MAPPING.find(toolType); |
| if (toolTypeIterator == TOOL_TYPE_MAPPING.end()) { |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_MT_TOOL_TYPE, static_cast<int32_t>(toolTypeIterator->second), |
| eventTime)) { |
| return false; |
| } |
| if (uinputAction == UinputAction::PRESS && !handleTouchDown(pointerId, eventTime)) { |
| return false; |
| } |
| if (uinputAction == UinputAction::RELEASE && !handleTouchUp(pointerId, eventTime)) { |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_MT_POSITION_X, locationX, eventTime)) { |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_MT_POSITION_Y, locationY, eventTime)) { |
| return false; |
| } |
| if (!isnan(pressure)) { |
| if (!writeInputEvent(EV_ABS, ABS_MT_PRESSURE, pressure, eventTime)) { |
| return false; |
| } |
| } |
| if (!isnan(majorAxisSize)) { |
| if (!writeInputEvent(EV_ABS, ABS_MT_TOUCH_MAJOR, majorAxisSize, eventTime)) { |
| return false; |
| } |
| } |
| return writeInputEvent(EV_SYN, SYN_REPORT, 0, eventTime); |
| } |
| |
| bool VirtualTouchscreen::handleTouchUp(int32_t pointerId, std::chrono::nanoseconds eventTime) { |
| if (!writeInputEvent(EV_ABS, ABS_MT_TRACKING_ID, static_cast<int32_t>(-1), eventTime)) { |
| return false; |
| } |
| // When a pointer is no longer in touch, remove the pointer id from the corresponding |
| // entry in the unreleased touches map. |
| mActivePointers.reset(pointerId); |
| ALOGD_IF(isDebug(), "Pointer %d erased from the touchscreen %d", pointerId, mFd.get()); |
| |
| // Only sends the BTN UP event when there's no pointers on the touchscreen. |
| if (mActivePointers.none()) { |
| if (!writeInputEvent(EV_KEY, BTN_TOUCH, static_cast<int32_t>(UinputAction::RELEASE), |
| eventTime)) { |
| return false; |
| } |
| ALOGD_IF(isDebug(), "No pointers on touchscreen %d, BTN UP event sent.", mFd.get()); |
| } |
| return true; |
| } |
| |
| bool VirtualTouchscreen::handleTouchDown(int32_t pointerId, std::chrono::nanoseconds eventTime) { |
| // When a new pointer is down on the touchscreen, add the pointer id in the corresponding |
| // entry in the unreleased touches map. |
| if (mActivePointers.none()) { |
| // Only sends the BTN Down event when the first pointer on the touchscreen is down. |
| if (!writeInputEvent(EV_KEY, BTN_TOUCH, static_cast<int32_t>(UinputAction::PRESS), |
| eventTime)) { |
| return false; |
| } |
| ALOGD_IF(isDebug(), "First pointer %d down under touchscreen %d, BTN DOWN event sent", |
| pointerId, mFd.get()); |
| } |
| |
| mActivePointers.set(pointerId); |
| ALOGD_IF(isDebug(), "Added pointer %d under touchscreen %d in the map", pointerId, mFd.get()); |
| if (!writeInputEvent(EV_ABS, ABS_MT_TRACKING_ID, static_cast<int32_t>(pointerId), eventTime)) { |
| return false; |
| } |
| return true; |
| } |
| |
| // --- VirtualStylus --- |
| const std::map<int, int> VirtualStylus::TOOL_TYPE_MAPPING = { |
| {AMOTION_EVENT_TOOL_TYPE_STYLUS, BTN_TOOL_PEN}, |
| {AMOTION_EVENT_TOOL_TYPE_ERASER, BTN_TOOL_RUBBER}, |
| }; |
| |
| // Button code mapping from https://source.android.com/devices/input/touch-devices |
| const std::map<int, int> VirtualStylus::BUTTON_CODE_MAPPING = { |
| {AMOTION_EVENT_BUTTON_STYLUS_PRIMARY, BTN_STYLUS}, |
| {AMOTION_EVENT_BUTTON_STYLUS_SECONDARY, BTN_STYLUS2}, |
| }; |
| |
| VirtualStylus::VirtualStylus(unique_fd fd) |
| : VirtualInputDevice(std::move(fd)), mIsStylusDown(false) {} |
| |
| VirtualStylus::~VirtualStylus() {} |
| |
| bool VirtualStylus::writeMotionEvent(int32_t toolType, int32_t action, int32_t locationX, |
| int32_t locationY, int32_t pressure, int32_t tiltX, |
| int32_t tiltY, std::chrono::nanoseconds eventTime) { |
| auto actionIterator = VirtualTouchscreen::TOUCH_ACTION_MAPPING.find(action); |
| if (actionIterator == VirtualTouchscreen::TOUCH_ACTION_MAPPING.end()) { |
| ALOGE("Unsupported action passed for stylus: %d.", action); |
| return false; |
| } |
| UinputAction uinputAction = actionIterator->second; |
| auto toolTypeIterator = TOOL_TYPE_MAPPING.find(toolType); |
| if (toolTypeIterator == TOOL_TYPE_MAPPING.end()) { |
| ALOGE("Unsupported tool type passed for stylus: %d.", toolType); |
| return false; |
| } |
| uint16_t tool = static_cast<uint16_t>(toolTypeIterator->second); |
| if (uinputAction == UinputAction::PRESS && !handleStylusDown(tool, eventTime)) { |
| return false; |
| } |
| if (!mIsStylusDown) { |
| ALOGE("Action UP or MOVE received with no prior action DOWN for stylus %d.", mFd.get()); |
| return false; |
| } |
| if (uinputAction == UinputAction::RELEASE && !handleStylusUp(tool, eventTime)) { |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_X, locationX, eventTime)) { |
| ALOGE("Unsupported x-axis location passed for stylus: %d.", locationX); |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_Y, locationY, eventTime)) { |
| ALOGE("Unsupported y-axis location passed for stylus: %d.", locationY); |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_TILT_X, tiltX, eventTime)) { |
| ALOGE("Unsupported x-axis tilt passed for stylus: %d.", tiltX); |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_TILT_Y, tiltY, eventTime)) { |
| ALOGE("Unsupported y-axis tilt passed for stylus: %d.", tiltY); |
| return false; |
| } |
| if (!writeInputEvent(EV_ABS, ABS_PRESSURE, pressure, eventTime)) { |
| ALOGE("Unsupported pressure passed for stylus: %d.", pressure); |
| return false; |
| } |
| if (!writeInputEvent(EV_SYN, SYN_REPORT, 0, eventTime)) { |
| ALOGE("Failed to write SYN_REPORT for stylus motion event."); |
| return false; |
| } |
| return true; |
| } |
| |
| bool VirtualStylus::writeButtonEvent(int32_t androidButtonCode, int32_t androidAction, |
| std::chrono::nanoseconds eventTime) { |
| return writeEvKeyEvent(androidButtonCode, androidAction, BUTTON_CODE_MAPPING, |
| VirtualMouse::BUTTON_ACTION_MAPPING, eventTime); |
| } |
| |
| bool VirtualStylus::handleStylusDown(uint16_t tool, std::chrono::nanoseconds eventTime) { |
| if (mIsStylusDown) { |
| ALOGE("Repetitive action DOWN event received for a stylus that is already down."); |
| return false; |
| } |
| if (!writeInputEvent(EV_KEY, tool, static_cast<int32_t>(UinputAction::PRESS), eventTime)) { |
| ALOGE("Failed to write EV_KEY for stylus tool type: %u.", tool); |
| return false; |
| } |
| if (!writeInputEvent(EV_KEY, BTN_TOUCH, static_cast<int32_t>(UinputAction::PRESS), eventTime)) { |
| ALOGE("Failed to write BTN_TOUCH for stylus press."); |
| return false; |
| } |
| mIsStylusDown = true; |
| return true; |
| } |
| |
| bool VirtualStylus::handleStylusUp(uint16_t tool, std::chrono::nanoseconds eventTime) { |
| if (!writeInputEvent(EV_KEY, tool, static_cast<int32_t>(UinputAction::RELEASE), eventTime)) { |
| ALOGE("Failed to write EV_KEY for stylus tool type: %u.", tool); |
| return false; |
| } |
| if (!writeInputEvent(EV_KEY, BTN_TOUCH, static_cast<int32_t>(UinputAction::RELEASE), |
| eventTime)) { |
| ALOGE("Failed to write BTN_TOUCH for stylus release."); |
| return false; |
| } |
| mIsStylusDown = false; |
| return true; |
| } |
| |
| // --- VirtualRotaryEncoder --- |
| VirtualRotaryEncoder::VirtualRotaryEncoder(unique_fd fd) |
| : VirtualInputDevice(std::move(fd)), mAccumulatedHighResScrollAmount(0) {} |
| |
| VirtualRotaryEncoder::~VirtualRotaryEncoder() {} |
| |
| bool VirtualRotaryEncoder::writeScrollEvent(float scrollAmount, |
| std::chrono::nanoseconds eventTime) { |
| if (!vd_flags::high_resolution_scroll()) { |
| return writeInputEvent(EV_REL, REL_WHEEL, static_cast<int32_t>(scrollAmount), eventTime) && |
| writeInputEvent(EV_SYN, SYN_REPORT, 0, eventTime); |
| } |
| |
| const auto highResScrollAmount = |
| static_cast<int32_t>(scrollAmount * kEvdevHighResScrollUnitsPerDetent); |
| if (!writeInputEvent(EV_REL, REL_WHEEL_HI_RES, highResScrollAmount, eventTime)) { |
| return false; |
| } |
| |
| // According to evdev spec, a high-resolution scroll device needs to emit REL_WHEEL / REL_HWHEEL |
| // events in addition to high-res scroll events. Regular scroll events can approximate high-res |
| // scroll events, so we send a regular scroll event when the accumulated scroll motion reaches a |
| // detent (single wheel click). |
| mAccumulatedHighResScrollAmount += highResScrollAmount; |
| const int32_t scroll = mAccumulatedHighResScrollAmount / kEvdevHighResScrollUnitsPerDetent; |
| if (scroll != 0) { |
| if (!writeInputEvent(EV_REL, REL_WHEEL, scroll, eventTime)) { |
| return false; |
| } |
| mAccumulatedHighResScrollAmount %= kEvdevHighResScrollUnitsPerDetent; |
| } |
| |
| return writeInputEvent(EV_SYN, SYN_REPORT, 0, eventTime); |
| } |
| |
| } // namespace android |