| /* | 
 |  * Copyright (C) 2005 The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *      http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 |  | 
 | // | 
 | #ifndef _RUNTIME_EVENT_HUB_H | 
 | #define _RUNTIME_EVENT_HUB_H | 
 |  | 
 | #include <input/Input.h> | 
 | #include <input/InputDevice.h> | 
 | #include <input/Keyboard.h> | 
 | #include <input/KeyLayoutMap.h> | 
 | #include <input/KeyCharacterMap.h> | 
 | #include <input/VirtualKeyMap.h> | 
 | #include <utils/String8.h> | 
 | #include <utils/threads.h> | 
 | #include <utils/Log.h> | 
 | #include <utils/threads.h> | 
 | #include <utils/List.h> | 
 | #include <utils/Errors.h> | 
 | #include <utils/PropertyMap.h> | 
 | #include <utils/Vector.h> | 
 | #include <utils/KeyedVector.h> | 
 | #include <utils/BitSet.h> | 
 |  | 
 | #include <linux/input.h> | 
 | #include <sys/epoll.h> | 
 |  | 
 | /* Convenience constants. */ | 
 |  | 
 | #define BTN_FIRST 0x100  // first button code | 
 | #define BTN_LAST 0x15f   // last button code | 
 |  | 
 | /* | 
 |  * These constants are used privately in Android to pass raw timestamps | 
 |  * through evdev from uinput device drivers because there is currently no | 
 |  * other way to transfer this information.  The evdev driver automatically | 
 |  * timestamps all input events with the time they were posted and clobbers | 
 |  * whatever information was passed in. | 
 |  * | 
 |  * For the purposes of this hack, the timestamp is specified in the | 
 |  * CLOCK_MONOTONIC timebase and is split into two EV_MSC events specifying | 
 |  * seconds and microseconds. | 
 |  */ | 
 | #define MSC_ANDROID_TIME_SEC 0x6 | 
 | #define MSC_ANDROID_TIME_USEC 0x7 | 
 |  | 
 | namespace android { | 
 |  | 
 | enum { | 
 |     // Device id of a special "virtual" keyboard that is always present. | 
 |     VIRTUAL_KEYBOARD_ID = -1, | 
 |     // Device id of the "built-in" keyboard if there is one. | 
 |     BUILT_IN_KEYBOARD_ID = 0, | 
 | }; | 
 |  | 
 | /* | 
 |  * A raw event as retrieved from the EventHub. | 
 |  */ | 
 | struct RawEvent { | 
 |     nsecs_t when; | 
 |     int32_t deviceId; | 
 |     int32_t type; | 
 |     int32_t code; | 
 |     int32_t value; | 
 | }; | 
 |  | 
 | /* Describes an absolute axis. */ | 
 | struct RawAbsoluteAxisInfo { | 
 |     bool valid; // true if the information is valid, false otherwise | 
 |  | 
 |     int32_t minValue;  // minimum value | 
 |     int32_t maxValue;  // maximum value | 
 |     int32_t flat;      // center flat position, eg. flat == 8 means center is between -8 and 8 | 
 |     int32_t fuzz;      // error tolerance, eg. fuzz == 4 means value is +/- 4 due to noise | 
 |     int32_t resolution; // resolution in units per mm or radians per mm | 
 |  | 
 |     inline void clear() { | 
 |         valid = false; | 
 |         minValue = 0; | 
 |         maxValue = 0; | 
 |         flat = 0; | 
 |         fuzz = 0; | 
 |         resolution = 0; | 
 |     } | 
 | }; | 
 |  | 
 | /* | 
 |  * Input device classes. | 
 |  */ | 
 | enum { | 
 |     /* The input device is a keyboard or has buttons. */ | 
 |     INPUT_DEVICE_CLASS_KEYBOARD      = 0x00000001, | 
 |  | 
 |     /* The input device is an alpha-numeric keyboard (not just a dial pad). */ | 
 |     INPUT_DEVICE_CLASS_ALPHAKEY      = 0x00000002, | 
 |  | 
 |     /* The input device is a touchscreen or a touchpad (either single-touch or multi-touch). */ | 
 |     INPUT_DEVICE_CLASS_TOUCH         = 0x00000004, | 
 |  | 
 |     /* The input device is a cursor device such as a trackball or mouse. */ | 
 |     INPUT_DEVICE_CLASS_CURSOR        = 0x00000008, | 
 |  | 
 |     /* The input device is a multi-touch touchscreen. */ | 
 |     INPUT_DEVICE_CLASS_TOUCH_MT      = 0x00000010, | 
 |  | 
 |     /* The input device is a directional pad (implies keyboard, has DPAD keys). */ | 
 |     INPUT_DEVICE_CLASS_DPAD          = 0x00000020, | 
 |  | 
 |     /* The input device is a gamepad (implies keyboard, has BUTTON keys). */ | 
 |     INPUT_DEVICE_CLASS_GAMEPAD       = 0x00000040, | 
 |  | 
 |     /* The input device has switches. */ | 
 |     INPUT_DEVICE_CLASS_SWITCH        = 0x00000080, | 
 |  | 
 |     /* The input device is a joystick (implies gamepad, has joystick absolute axes). */ | 
 |     INPUT_DEVICE_CLASS_JOYSTICK      = 0x00000100, | 
 |  | 
 |     /* The input device has a vibrator (supports FF_RUMBLE). */ | 
 |     INPUT_DEVICE_CLASS_VIBRATOR      = 0x00000200, | 
 |  | 
 |     /* The input device has a microphone. */ | 
 |     INPUT_DEVICE_CLASS_MIC           = 0x00000400, | 
 |  | 
 |     /* The input device is an external stylus (has data we want to fuse with touch data). */ | 
 |     INPUT_DEVICE_CLASS_EXTERNAL_STYLUS = 0x00000800, | 
 |  | 
 |     /* The input device has a rotary encoder */ | 
 |     INPUT_DEVICE_CLASS_ROTARY_ENCODER = 0x00001000, | 
 |  | 
 |     /* The input device is virtual (not a real device, not part of UI configuration). */ | 
 |     INPUT_DEVICE_CLASS_VIRTUAL       = 0x40000000, | 
 |  | 
 |     /* The input device is external (not built-in). */ | 
 |     INPUT_DEVICE_CLASS_EXTERNAL      = 0x80000000, | 
 | }; | 
 |  | 
 | /* | 
 |  * Gets the class that owns an axis, in cases where multiple classes might claim | 
 |  * the same axis for different purposes. | 
 |  */ | 
 | extern uint32_t getAbsAxisUsage(int32_t axis, uint32_t deviceClasses); | 
 |  | 
 | /* | 
 |  * Grand Central Station for events. | 
 |  * | 
 |  * The event hub aggregates input events received across all known input | 
 |  * devices on the system, including devices that may be emulated by the simulator | 
 |  * environment.  In addition, the event hub generates fake input events to indicate | 
 |  * when devices are added or removed. | 
 |  * | 
 |  * The event hub provides a stream of input events (via the getEvent function). | 
 |  * It also supports querying the current actual state of input devices such as identifying | 
 |  * which keys are currently down.  Finally, the event hub keeps track of the capabilities of | 
 |  * individual input devices, such as their class and the set of key codes that they support. | 
 |  */ | 
 | class EventHubInterface : public virtual RefBase { | 
 | protected: | 
 |     EventHubInterface() { } | 
 |     virtual ~EventHubInterface() { } | 
 |  | 
 | public: | 
 |     // Synthetic raw event type codes produced when devices are added or removed. | 
 |     enum { | 
 |         // Sent when a device is added. | 
 |         DEVICE_ADDED = 0x10000000, | 
 |         // Sent when a device is removed. | 
 |         DEVICE_REMOVED = 0x20000000, | 
 |         // Sent when all added/removed devices from the most recent scan have been reported. | 
 |         // This event is always sent at least once. | 
 |         FINISHED_DEVICE_SCAN = 0x30000000, | 
 |  | 
 |         FIRST_SYNTHETIC_EVENT = DEVICE_ADDED, | 
 |     }; | 
 |  | 
 |     virtual uint32_t getDeviceClasses(int32_t deviceId) const = 0; | 
 |  | 
 |     virtual InputDeviceIdentifier getDeviceIdentifier(int32_t deviceId) const = 0; | 
 |  | 
 |     virtual int32_t getDeviceControllerNumber(int32_t deviceId) const = 0; | 
 |  | 
 |     virtual void getConfiguration(int32_t deviceId, PropertyMap* outConfiguration) const = 0; | 
 |  | 
 |     virtual status_t getAbsoluteAxisInfo(int32_t deviceId, int axis, | 
 |             RawAbsoluteAxisInfo* outAxisInfo) const = 0; | 
 |  | 
 |     virtual bool hasRelativeAxis(int32_t deviceId, int axis) const = 0; | 
 |  | 
 |     virtual bool hasInputProperty(int32_t deviceId, int property) const = 0; | 
 |  | 
 |     virtual status_t mapKey(int32_t deviceId, | 
 |             int32_t scanCode, int32_t usageCode, int32_t metaState, | 
 |             int32_t* outKeycode, int32_t *outMetaState, uint32_t* outFlags) const = 0; | 
 |  | 
 |     virtual status_t mapAxis(int32_t deviceId, int32_t scanCode, | 
 |             AxisInfo* outAxisInfo) const = 0; | 
 |  | 
 |     // Sets devices that are excluded from opening. | 
 |     // This can be used to ignore input devices for sensors. | 
 |     virtual void setExcludedDevices(const Vector<String8>& devices) = 0; | 
 |  | 
 |     /* | 
 |      * Wait for events to become available and returns them. | 
 |      * After returning, the EventHub holds onto a wake lock until the next call to getEvent. | 
 |      * This ensures that the device will not go to sleep while the event is being processed. | 
 |      * If the device needs to remain awake longer than that, then the caller is responsible | 
 |      * for taking care of it (say, by poking the power manager user activity timer). | 
 |      * | 
 |      * The timeout is advisory only.  If the device is asleep, it will not wake just to | 
 |      * service the timeout. | 
 |      * | 
 |      * Returns the number of events obtained, or 0 if the timeout expired. | 
 |      */ | 
 |     virtual size_t getEvents(int timeoutMillis, RawEvent* buffer, size_t bufferSize) = 0; | 
 |  | 
 |     /* | 
 |      * Query current input state. | 
 |      */ | 
 |     virtual int32_t getScanCodeState(int32_t deviceId, int32_t scanCode) const = 0; | 
 |     virtual int32_t getKeyCodeState(int32_t deviceId, int32_t keyCode) const = 0; | 
 |     virtual int32_t getSwitchState(int32_t deviceId, int32_t sw) const = 0; | 
 |     virtual status_t getAbsoluteAxisValue(int32_t deviceId, int32_t axis, | 
 |             int32_t* outValue) const = 0; | 
 |  | 
 |     /* | 
 |      * Examine key input devices for specific framework keycode support | 
 |      */ | 
 |     virtual bool markSupportedKeyCodes(int32_t deviceId, size_t numCodes, const int32_t* keyCodes, | 
 |             uint8_t* outFlags) const = 0; | 
 |  | 
 |     virtual bool hasScanCode(int32_t deviceId, int32_t scanCode) const = 0; | 
 |  | 
 |     /* LED related functions expect Android LED constants, not scan codes or HID usages */ | 
 |     virtual bool hasLed(int32_t deviceId, int32_t led) const = 0; | 
 |     virtual void setLedState(int32_t deviceId, int32_t led, bool on) = 0; | 
 |  | 
 |     virtual void getVirtualKeyDefinitions(int32_t deviceId, | 
 |             Vector<VirtualKeyDefinition>& outVirtualKeys) const = 0; | 
 |  | 
 |     virtual sp<KeyCharacterMap> getKeyCharacterMap(int32_t deviceId) const = 0; | 
 |     virtual bool setKeyboardLayoutOverlay(int32_t deviceId, const sp<KeyCharacterMap>& map) = 0; | 
 |  | 
 |     /* Control the vibrator. */ | 
 |     virtual void vibrate(int32_t deviceId, nsecs_t duration) = 0; | 
 |     virtual void cancelVibrate(int32_t deviceId) = 0; | 
 |  | 
 |     /* Requests the EventHub to reopen all input devices on the next call to getEvents(). */ | 
 |     virtual void requestReopenDevices() = 0; | 
 |  | 
 |     /* Wakes up getEvents() if it is blocked on a read. */ | 
 |     virtual void wake() = 0; | 
 |  | 
 |     /* Dump EventHub state to a string. */ | 
 |     virtual void dump(String8& dump) = 0; | 
 |  | 
 |     /* Called by the heatbeat to ensures that the reader has not deadlocked. */ | 
 |     virtual void monitor() = 0; | 
 | }; | 
 |  | 
 | class EventHub : public EventHubInterface | 
 | { | 
 | public: | 
 |     EventHub(); | 
 |  | 
 |     virtual uint32_t getDeviceClasses(int32_t deviceId) const; | 
 |  | 
 |     virtual InputDeviceIdentifier getDeviceIdentifier(int32_t deviceId) const; | 
 |  | 
 |     virtual int32_t getDeviceControllerNumber(int32_t deviceId) const; | 
 |  | 
 |     virtual void getConfiguration(int32_t deviceId, PropertyMap* outConfiguration) const; | 
 |  | 
 |     virtual status_t getAbsoluteAxisInfo(int32_t deviceId, int axis, | 
 |             RawAbsoluteAxisInfo* outAxisInfo) const; | 
 |  | 
 |     virtual bool hasRelativeAxis(int32_t deviceId, int axis) const; | 
 |  | 
 |     virtual bool hasInputProperty(int32_t deviceId, int property) const; | 
 |  | 
 |     virtual status_t mapKey(int32_t deviceId, | 
 |             int32_t scanCode, int32_t usageCode, int32_t metaState, | 
 |             int32_t* outKeycode, int32_t *outMetaState, uint32_t* outFlags) const; | 
 |  | 
 |     virtual status_t mapAxis(int32_t deviceId, int32_t scanCode, | 
 |             AxisInfo* outAxisInfo) const; | 
 |  | 
 |     virtual void setExcludedDevices(const Vector<String8>& devices); | 
 |  | 
 |     virtual int32_t getScanCodeState(int32_t deviceId, int32_t scanCode) const; | 
 |     virtual int32_t getKeyCodeState(int32_t deviceId, int32_t keyCode) const; | 
 |     virtual int32_t getSwitchState(int32_t deviceId, int32_t sw) const; | 
 |     virtual status_t getAbsoluteAxisValue(int32_t deviceId, int32_t axis, int32_t* outValue) const; | 
 |  | 
 |     virtual bool markSupportedKeyCodes(int32_t deviceId, size_t numCodes, | 
 |             const int32_t* keyCodes, uint8_t* outFlags) const; | 
 |  | 
 |     virtual size_t getEvents(int timeoutMillis, RawEvent* buffer, size_t bufferSize); | 
 |  | 
 |     virtual bool hasScanCode(int32_t deviceId, int32_t scanCode) const; | 
 |     virtual bool hasLed(int32_t deviceId, int32_t led) const; | 
 |     virtual void setLedState(int32_t deviceId, int32_t led, bool on); | 
 |  | 
 |     virtual void getVirtualKeyDefinitions(int32_t deviceId, | 
 |             Vector<VirtualKeyDefinition>& outVirtualKeys) const; | 
 |  | 
 |     virtual sp<KeyCharacterMap> getKeyCharacterMap(int32_t deviceId) const; | 
 |     virtual bool setKeyboardLayoutOverlay(int32_t deviceId, const sp<KeyCharacterMap>& map); | 
 |  | 
 |     virtual void vibrate(int32_t deviceId, nsecs_t duration); | 
 |     virtual void cancelVibrate(int32_t deviceId); | 
 |  | 
 |     virtual void requestReopenDevices(); | 
 |  | 
 |     virtual void wake(); | 
 |  | 
 |     virtual void dump(String8& dump); | 
 |     virtual void monitor(); | 
 |  | 
 | protected: | 
 |     virtual ~EventHub(); | 
 |  | 
 | private: | 
 |     struct Device { | 
 |         Device* next; | 
 |  | 
 |         int fd; // may be -1 if device is virtual | 
 |         const int32_t id; | 
 |         const String8 path; | 
 |         const InputDeviceIdentifier identifier; | 
 |  | 
 |         uint32_t classes; | 
 |  | 
 |         uint8_t keyBitmask[(KEY_MAX + 1) / 8]; | 
 |         uint8_t absBitmask[(ABS_MAX + 1) / 8]; | 
 |         uint8_t relBitmask[(REL_MAX + 1) / 8]; | 
 |         uint8_t swBitmask[(SW_MAX + 1) / 8]; | 
 |         uint8_t ledBitmask[(LED_MAX + 1) / 8]; | 
 |         uint8_t ffBitmask[(FF_MAX + 1) / 8]; | 
 |         uint8_t propBitmask[(INPUT_PROP_MAX + 1) / 8]; | 
 |  | 
 |         String8 configurationFile; | 
 |         PropertyMap* configuration; | 
 |         VirtualKeyMap* virtualKeyMap; | 
 |         KeyMap keyMap; | 
 |  | 
 |         sp<KeyCharacterMap> overlayKeyMap; | 
 |         sp<KeyCharacterMap> combinedKeyMap; | 
 |  | 
 |         bool ffEffectPlaying; | 
 |         int16_t ffEffectId; // initially -1 | 
 |  | 
 |         int32_t controllerNumber; | 
 |  | 
 |         int32_t timestampOverrideSec; | 
 |         int32_t timestampOverrideUsec; | 
 |  | 
 |         Device(int fd, int32_t id, const String8& path, const InputDeviceIdentifier& identifier); | 
 |         ~Device(); | 
 |  | 
 |         void close(); | 
 |  | 
 |         inline bool isVirtual() const { return fd < 0; } | 
 |  | 
 |         const sp<KeyCharacterMap>& getKeyCharacterMap() const { | 
 |             if (combinedKeyMap != NULL) { | 
 |                 return combinedKeyMap; | 
 |             } | 
 |             return keyMap.keyCharacterMap; | 
 |         } | 
 |     }; | 
 |  | 
 |     status_t openDeviceLocked(const char *devicePath); | 
 |     void createVirtualKeyboardLocked(); | 
 |     void addDeviceLocked(Device* device); | 
 |     void assignDescriptorLocked(InputDeviceIdentifier& identifier); | 
 |  | 
 |     status_t closeDeviceByPathLocked(const char *devicePath); | 
 |     void closeDeviceLocked(Device* device); | 
 |     void closeAllDevicesLocked(); | 
 |  | 
 |     status_t scanDirLocked(const char *dirname); | 
 |     void scanDevicesLocked(); | 
 |     status_t readNotifyLocked(); | 
 |  | 
 |     Device* getDeviceByDescriptorLocked(String8& descriptor) const; | 
 |     Device* getDeviceLocked(int32_t deviceId) const; | 
 |     Device* getDeviceByPathLocked(const char* devicePath) const; | 
 |  | 
 |     bool hasKeycodeLocked(Device* device, int keycode) const; | 
 |  | 
 |     void loadConfigurationLocked(Device* device); | 
 |     status_t loadVirtualKeyMapLocked(Device* device); | 
 |     status_t loadKeyMapLocked(Device* device); | 
 |  | 
 |     bool isExternalDeviceLocked(Device* device); | 
 |     bool deviceHasMicLocked(Device* device); | 
 |  | 
 |     int32_t getNextControllerNumberLocked(Device* device); | 
 |     void releaseControllerNumberLocked(Device* device); | 
 |     void setLedForController(Device* device); | 
 |  | 
 |     status_t mapLed(Device* device, int32_t led, int32_t* outScanCode) const; | 
 |     void setLedStateLocked(Device* device, int32_t led, bool on); | 
 |  | 
 |     // Protect all internal state. | 
 |     mutable Mutex mLock; | 
 |  | 
 |     // The actual id of the built-in keyboard, or NO_BUILT_IN_KEYBOARD if none. | 
 |     // EventHub remaps the built-in keyboard to id 0 externally as required by the API. | 
 |     enum { | 
 |         // Must not conflict with any other assigned device ids, including | 
 |         // the virtual keyboard id (-1). | 
 |         NO_BUILT_IN_KEYBOARD = -2, | 
 |     }; | 
 |     int32_t mBuiltInKeyboardId; | 
 |  | 
 |     int32_t mNextDeviceId; | 
 |  | 
 |     BitSet32 mControllerNumbers; | 
 |  | 
 |     KeyedVector<int32_t, Device*> mDevices; | 
 |  | 
 |     Device *mOpeningDevices; | 
 |     Device *mClosingDevices; | 
 |  | 
 |     bool mNeedToSendFinishedDeviceScan; | 
 |     bool mNeedToReopenDevices; | 
 |     bool mNeedToScanDevices; | 
 |     Vector<String8> mExcludedDevices; | 
 |  | 
 |     int mEpollFd; | 
 |     int mINotifyFd; | 
 |     int mWakeReadPipeFd; | 
 |     int mWakeWritePipeFd; | 
 |  | 
 |     // Ids used for epoll notifications not associated with devices. | 
 |     static const uint32_t EPOLL_ID_INOTIFY = 0x80000001; | 
 |     static const uint32_t EPOLL_ID_WAKE = 0x80000002; | 
 |  | 
 |     // Epoll FD list size hint. | 
 |     static const int EPOLL_SIZE_HINT = 8; | 
 |  | 
 |     // Maximum number of signalled FDs to handle at a time. | 
 |     static const int EPOLL_MAX_EVENTS = 16; | 
 |  | 
 |     // The array of pending epoll events and the index of the next event to be handled. | 
 |     struct epoll_event mPendingEventItems[EPOLL_MAX_EVENTS]; | 
 |     size_t mPendingEventCount; | 
 |     size_t mPendingEventIndex; | 
 |     bool mPendingINotify; | 
 |  | 
 |     bool mUsingEpollWakeup; | 
 | }; | 
 |  | 
 | }; // namespace android | 
 |  | 
 | #endif // _RUNTIME_EVENT_HUB_H |