| /* |
| * Copyright (C) 2020 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // TODO(b/129481165): remove the #pragma below and fix conversion issues |
| #pragma clang diagnostic push |
| #pragma clang diagnostic ignored "-Wconversion" |
| |
| #include <private/android_filesystem_config.h> |
| |
| #include "LayerTransactionTest.h" |
| |
| namespace android { |
| |
| class ScreenCaptureTest : public LayerTransactionTest { |
| protected: |
| virtual void SetUp() { |
| LayerTransactionTest::SetUp(); |
| ASSERT_EQ(NO_ERROR, mClient->initCheck()); |
| |
| const auto display = SurfaceComposerClient::getInternalDisplayToken(); |
| ASSERT_FALSE(display == nullptr); |
| |
| ui::DisplayMode mode; |
| ASSERT_EQ(NO_ERROR, SurfaceComposerClient::getActiveDisplayMode(display, &mode)); |
| const ui::Size& resolution = mode.resolution; |
| |
| mDisplaySize = resolution; |
| |
| // Background surface |
| mBGSurfaceControl = createLayer(String8("BG Test Surface"), resolution.getWidth(), |
| resolution.getHeight(), 0); |
| ASSERT_TRUE(mBGSurfaceControl != nullptr); |
| ASSERT_TRUE(mBGSurfaceControl->isValid()); |
| TransactionUtils::fillSurfaceRGBA8(mBGSurfaceControl, 63, 63, 195); |
| |
| // Foreground surface |
| mFGSurfaceControl = createLayer(String8("FG Test Surface"), 64, 64, 0); |
| |
| ASSERT_TRUE(mFGSurfaceControl != nullptr); |
| ASSERT_TRUE(mFGSurfaceControl->isValid()); |
| |
| TransactionUtils::fillSurfaceRGBA8(mFGSurfaceControl, 195, 63, 63); |
| |
| asTransaction([&](Transaction& t) { |
| t.setDisplayLayerStack(display, 0); |
| |
| t.setLayer(mBGSurfaceControl, INT32_MAX - 2).show(mBGSurfaceControl); |
| |
| t.setLayer(mFGSurfaceControl, INT32_MAX - 1) |
| .setPosition(mFGSurfaceControl, 64, 64) |
| .show(mFGSurfaceControl); |
| }); |
| } |
| |
| virtual void TearDown() { |
| LayerTransactionTest::TearDown(); |
| mBGSurfaceControl = 0; |
| mFGSurfaceControl = 0; |
| } |
| |
| sp<SurfaceControl> mBGSurfaceControl; |
| sp<SurfaceControl> mFGSurfaceControl; |
| std::unique_ptr<ScreenCapture> mCapture; |
| ui::Size mDisplaySize; |
| }; |
| |
| TEST_F(ScreenCaptureTest, SetFlagsSecureEUidSystem) { |
| sp<SurfaceControl> layer; |
| ASSERT_NO_FATAL_FAILURE( |
| layer = createLayer("test", 32, 32, |
| ISurfaceComposerClient::eSecure | |
| ISurfaceComposerClient::eFXSurfaceBufferQueue)); |
| ASSERT_NO_FATAL_FAILURE(fillBufferQueueLayerColor(layer, Color::RED, 32, 32)); |
| |
| Transaction().show(layer).setLayer(layer, INT32_MAX).apply(true); |
| |
| { |
| // Ensure the UID is not root because root has all permissions |
| UIDFaker f(AID_APP_START); |
| ASSERT_EQ(PERMISSION_DENIED, ScreenCapture::captureDisplay(mCaptureArgs, mCaptureResults)); |
| } |
| |
| UIDFaker f(AID_SYSTEM); |
| |
| // By default the system can capture screenshots with secure layers but they |
| // will be blacked out |
| ASSERT_EQ(NO_ERROR, ScreenCapture::captureDisplay(mCaptureArgs, mCaptureResults)); |
| |
| { |
| SCOPED_TRACE("as system"); |
| auto shot = screenshot(); |
| shot->expectColor(Rect(0, 0, 32, 32), Color::BLACK); |
| } |
| |
| // Here we pass captureSecureLayers = true and since we are AID_SYSTEM we should be able |
| // to receive them...we are expected to take care with the results. |
| DisplayCaptureArgs args; |
| args.displayToken = mDisplay; |
| args.captureSecureLayers = true; |
| ASSERT_EQ(NO_ERROR, ScreenCapture::captureDisplay(args, mCaptureResults)); |
| ASSERT_TRUE(mCaptureResults.capturedSecureLayers); |
| ScreenCapture sc(mCaptureResults.buffer); |
| sc.expectColor(Rect(0, 0, 32, 32), Color::RED); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureChildSetParentFlagsSecureEUidSystem) { |
| sp<SurfaceControl> parentLayer; |
| ASSERT_NO_FATAL_FAILURE( |
| parentLayer = createLayer("parent-test", 32, 32, |
| ISurfaceComposerClient::eSecure | |
| ISurfaceComposerClient::eFXSurfaceBufferQueue)); |
| ASSERT_NO_FATAL_FAILURE(fillBufferQueueLayerColor(parentLayer, Color::RED, 32, 32)); |
| |
| sp<SurfaceControl> childLayer; |
| ASSERT_NO_FATAL_FAILURE(childLayer = createLayer("child-test", 10, 10, |
| ISurfaceComposerClient::eFXSurfaceBufferQueue, |
| parentLayer.get())); |
| ASSERT_NO_FATAL_FAILURE(fillBufferQueueLayerColor(childLayer, Color::BLUE, 10, 10)); |
| |
| Transaction().show(parentLayer).setLayer(parentLayer, INT32_MAX).show(childLayer).apply(true); |
| |
| UIDFaker f(AID_SYSTEM); |
| |
| { |
| SCOPED_TRACE("as system"); |
| auto shot = screenshot(); |
| shot->expectColor(Rect(0, 0, 10, 10), Color::BLACK); |
| } |
| |
| // Here we pass captureSecureLayers = true and since we are AID_SYSTEM we should be able |
| // to receive them...we are expected to take care with the results. |
| DisplayCaptureArgs args; |
| args.displayToken = mDisplay; |
| args.captureSecureLayers = true; |
| ASSERT_EQ(NO_ERROR, ScreenCapture::captureDisplay(args, mCaptureResults)); |
| ASSERT_TRUE(mCaptureResults.capturedSecureLayers); |
| ScreenCapture sc(mCaptureResults.buffer); |
| sc.expectColor(Rect(0, 0, 10, 10), Color::BLUE); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureSingleLayer) { |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = mBGSurfaceControl->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectBGColor(0, 0); |
| // Doesn't capture FG layer which is at 64, 64 |
| mCapture->expectBGColor(64, 64); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureLayerWithChild) { |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| |
| SurfaceComposerClient::Transaction().show(child).apply(true); |
| |
| // Captures mFGSurfaceControl layer and its child. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = mFGSurfaceControl->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectFGColor(10, 10); |
| mCapture->expectChildColor(0, 0); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureLayerChildOnly) { |
| auto fgHandle = mFGSurfaceControl->getHandle(); |
| |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| |
| SurfaceComposerClient::Transaction().show(child).apply(true); |
| |
| // Captures mFGSurfaceControl's child |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = fgHandle; |
| captureArgs.childrenOnly = true; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->checkPixel(10, 10, 0, 0, 0); |
| mCapture->expectChildColor(0, 0); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureLayerExclude) { |
| auto fgHandle = mFGSurfaceControl->getHandle(); |
| |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| sp<SurfaceControl> child2 = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child2, 200, 0, 200); |
| |
| SurfaceComposerClient::Transaction() |
| .show(child) |
| .show(child2) |
| .setLayer(child, 1) |
| .setLayer(child2, 2) |
| .apply(true); |
| |
| // Child2 would be visible but its excluded, so we should see child1 color instead. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = fgHandle; |
| captureArgs.childrenOnly = true; |
| captureArgs.excludeHandles = {child2->getHandle()}; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->checkPixel(10, 10, 0, 0, 0); |
| mCapture->checkPixel(0, 0, 200, 200, 200); |
| } |
| |
| // Like the last test but verifies that children are also exclude. |
| TEST_F(ScreenCaptureTest, CaptureLayerExcludeTree) { |
| auto fgHandle = mFGSurfaceControl->getHandle(); |
| |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| sp<SurfaceControl> child2 = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child2, 200, 0, 200); |
| sp<SurfaceControl> child3 = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, child2.get()); |
| TransactionUtils::fillSurfaceRGBA8(child2, 200, 0, 200); |
| |
| SurfaceComposerClient::Transaction() |
| .show(child) |
| .show(child2) |
| .show(child3) |
| .setLayer(child, 1) |
| .setLayer(child2, 2) |
| .apply(true); |
| |
| // Child2 would be visible but its excluded, so we should see child1 color instead. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = fgHandle; |
| captureArgs.childrenOnly = true; |
| captureArgs.excludeHandles = {child2->getHandle()}; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->checkPixel(10, 10, 0, 0, 0); |
| mCapture->checkPixel(0, 0, 200, 200, 200); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureTransparent) { |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| |
| SurfaceComposerClient::Transaction().show(child).apply(true); |
| |
| // Captures child |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = child->getHandle(); |
| captureArgs.sourceCrop = {0, 0, 10, 20}; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(0, 0, 9, 9), {200, 200, 200, 255}); |
| // Area outside of child's bounds is transparent. |
| mCapture->expectColor(Rect(0, 10, 9, 19), {0, 0, 0, 0}); |
| } |
| |
| TEST_F(ScreenCaptureTest, DontCaptureRelativeOutsideTree) { |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| ASSERT_NE(nullptr, child.get()) << "failed to create surface"; |
| sp<SurfaceControl> relative = createLayer(String8("Relative surface"), 10, 10, 0); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| TransactionUtils::fillSurfaceRGBA8(relative, 100, 100, 100); |
| |
| SurfaceComposerClient::Transaction() |
| .show(child) |
| // Set relative layer above fg layer so should be shown above when computing all layers. |
| .setRelativeLayer(relative, mFGSurfaceControl, 1) |
| .show(relative) |
| .apply(true); |
| |
| // Captures mFGSurfaceControl layer and its child. Relative layer shouldn't be captured. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = mFGSurfaceControl->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectFGColor(10, 10); |
| mCapture->expectChildColor(0, 0); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureRelativeInTree) { |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| sp<SurfaceControl> relative = createSurface(mClient, "Relative surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| TransactionUtils::fillSurfaceRGBA8(relative, 100, 100, 100); |
| |
| SurfaceComposerClient::Transaction() |
| .show(child) |
| // Set relative layer below fg layer but relative to child layer so it should be shown |
| // above child layer. |
| .setLayer(relative, -1) |
| .setRelativeLayer(relative, child, 1) |
| .show(relative) |
| .apply(true); |
| |
| // Captures mFGSurfaceControl layer and its children. Relative layer is a child of fg so its |
| // relative value should be taken into account, placing it above child layer. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = mFGSurfaceControl->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectFGColor(10, 10); |
| // Relative layer is showing on top of child layer |
| mCapture->expectColor(Rect(0, 0, 9, 9), {100, 100, 100, 255}); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureBoundlessLayerWithSourceCrop) { |
| sp<SurfaceControl> child = createColorLayer("Child layer", Color::RED, mFGSurfaceControl.get()); |
| SurfaceComposerClient::Transaction().show(child).apply(true); |
| |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = child->getHandle(); |
| captureArgs.sourceCrop = {0, 0, 10, 10}; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| |
| mCapture->expectColor(Rect(0, 0, 9, 9), Color::RED); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureBoundedLayerWithoutSourceCrop) { |
| sp<SurfaceControl> child = createColorLayer("Child layer", Color::RED, mFGSurfaceControl.get()); |
| Rect layerCrop(0, 0, 10, 10); |
| SurfaceComposerClient::Transaction().setCrop(child, layerCrop).show(child).apply(true); |
| |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = child->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| |
| mCapture->expectColor(Rect(0, 0, 9, 9), Color::RED); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureBoundlessLayerWithoutSourceCropFails) { |
| sp<SurfaceControl> child = createColorLayer("Child layer", Color::RED, mFGSurfaceControl.get()); |
| SurfaceComposerClient::Transaction().show(child).apply(true); |
| |
| LayerCaptureArgs args; |
| args.layerHandle = child->getHandle(); |
| |
| ScreenCaptureResults captureResults; |
| ASSERT_EQ(BAD_VALUE, ScreenCapture::captureLayers(args, captureResults)); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureBufferLayerWithoutBufferFails) { |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, |
| ISurfaceComposerClient::eFXSurfaceBufferState, |
| mFGSurfaceControl.get()); |
| |
| SurfaceComposerClient::Transaction().show(child).apply(true); |
| sp<GraphicBuffer> outBuffer; |
| |
| LayerCaptureArgs args; |
| args.layerHandle = child->getHandle(); |
| args.childrenOnly = false; |
| |
| ScreenCaptureResults captureResults; |
| ASSERT_EQ(BAD_VALUE, ScreenCapture::captureLayers(args, captureResults)); |
| |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(child, Color::RED, 32, 32)); |
| SurfaceComposerClient::Transaction().apply(true); |
| ASSERT_EQ(NO_ERROR, ScreenCapture::captureLayers(args, captureResults)); |
| ScreenCapture sc(captureResults.buffer); |
| sc.expectColor(Rect(0, 0, 9, 9), Color::RED); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureLayerWithGrandchild) { |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| |
| sp<SurfaceControl> grandchild = createSurface(mClient, "Grandchild surface", 5, 5, |
| PIXEL_FORMAT_RGBA_8888, 0, child.get()); |
| |
| TransactionUtils::fillSurfaceRGBA8(grandchild, 50, 50, 50); |
| SurfaceComposerClient::Transaction() |
| .show(child) |
| .setPosition(grandchild, 5, 5) |
| .show(grandchild) |
| .apply(true); |
| |
| // Captures mFGSurfaceControl, its child, and the grandchild. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = mFGSurfaceControl->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectFGColor(10, 10); |
| mCapture->expectChildColor(0, 0); |
| mCapture->checkPixel(5, 5, 50, 50, 50); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureChildOnly) { |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| |
| SurfaceComposerClient::Transaction().setPosition(child, 5, 5).show(child).apply(true); |
| |
| // Captures only the child layer, and not the parent. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = child->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectChildColor(0, 0); |
| mCapture->expectChildColor(9, 9); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureGrandchildOnly) { |
| sp<SurfaceControl> child = createSurface(mClient, "Child surface", 10, 10, |
| PIXEL_FORMAT_RGBA_8888, 0, mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(child, 200, 200, 200); |
| auto childHandle = child->getHandle(); |
| |
| sp<SurfaceControl> grandchild = createSurface(mClient, "Grandchild surface", 5, 5, |
| PIXEL_FORMAT_RGBA_8888, 0, child.get()); |
| TransactionUtils::fillSurfaceRGBA8(grandchild, 50, 50, 50); |
| |
| SurfaceComposerClient::Transaction() |
| .show(child) |
| .setPosition(grandchild, 5, 5) |
| .show(grandchild) |
| .apply(true); |
| |
| // Captures only the grandchild. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = grandchild->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->checkPixel(0, 0, 50, 50, 50); |
| mCapture->checkPixel(4, 4, 50, 50, 50); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureCrop) { |
| sp<SurfaceControl> redLayer = createLayer(String8("Red surface"), 60, 60, |
| ISurfaceComposerClient::eFXSurfaceBufferState); |
| sp<SurfaceControl> blueLayer = createSurface(mClient, "Blue surface", 30, 30, |
| PIXEL_FORMAT_RGBA_8888, |
| ISurfaceComposerClient::eFXSurfaceBufferState, |
| redLayer.get()); |
| |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(redLayer, Color::RED, 60, 60)); |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(blueLayer, Color::BLUE, 30, 30)); |
| |
| SurfaceComposerClient::Transaction() |
| .setLayer(redLayer, INT32_MAX - 1) |
| .show(redLayer) |
| .show(blueLayer) |
| .apply(true); |
| |
| // Capturing full screen should have both red and blue are visible. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = redLayer->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(0, 0, 29, 29), Color::BLUE); |
| // red area below the blue area |
| mCapture->expectColor(Rect(0, 30, 59, 59), Color::RED); |
| // red area to the right of the blue area |
| mCapture->expectColor(Rect(30, 0, 59, 59), Color::RED); |
| |
| captureArgs.sourceCrop = {0, 0, 30, 30}; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| // Capturing the cropped screen, cropping out the shown red area, should leave only the blue |
| // area visible. |
| mCapture->expectColor(Rect(0, 0, 29, 29), Color::BLUE); |
| mCapture->checkPixel(30, 30, 0, 0, 0); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureSize) { |
| sp<SurfaceControl> redLayer = |
| createLayer(String8("Red surface"), 60, 60, ISurfaceComposerClient::eFXSurfaceBufferState); |
| sp<SurfaceControl> blueLayer = createSurface(mClient, "Blue surface", 30, 30, |
| PIXEL_FORMAT_RGBA_8888, |
| ISurfaceComposerClient::eFXSurfaceBufferState, |
| redLayer.get()); |
| |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(redLayer, Color::RED, 60, 60)); |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(blueLayer, Color::BLUE, 30, 30)); |
| |
| SurfaceComposerClient::Transaction() |
| .setLayer(redLayer, INT32_MAX - 1) |
| .show(redLayer) |
| .show(blueLayer) |
| .apply(true); |
| |
| // Capturing full screen should have both red and blue are visible. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = redLayer->getHandle(); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(0, 0, 29, 29), Color::BLUE); |
| // red area below the blue area |
| mCapture->expectColor(Rect(0, 30, 59, 59), Color::RED); |
| // red area to the right of the blue area |
| mCapture->expectColor(Rect(30, 0, 59, 59), Color::RED); |
| |
| captureArgs.frameScaleX = 0.5f; |
| captureArgs.frameScaleY = 0.5f; |
| sleep(1); |
| |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| // Capturing the downsized area (30x30) should leave both red and blue but in a smaller area. |
| mCapture->expectColor(Rect(0, 0, 14, 14), Color::BLUE); |
| // red area below the blue area |
| mCapture->expectColor(Rect(0, 15, 29, 29), Color::RED); |
| // red area to the right of the blue area |
| mCapture->expectColor(Rect(15, 0, 29, 29), Color::RED); |
| mCapture->checkPixel(30, 30, 0, 0, 0); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureInvalidLayer) { |
| LayerCaptureArgs args; |
| args.layerHandle = new BBinder(); |
| |
| ScreenCaptureResults captureResults; |
| // Layer was deleted so captureLayers should fail with NAME_NOT_FOUND |
| ASSERT_EQ(NAME_NOT_FOUND, ScreenCapture::captureLayers(args, captureResults)); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureTooLargeLayer) { |
| sp<SurfaceControl> redLayer = createLayer(String8("Red surface"), 60, 60); |
| ASSERT_NO_FATAL_FAILURE(fillBufferQueueLayerColor(redLayer, Color::RED, 60, 60)); |
| |
| Transaction().show(redLayer).setLayer(redLayer, INT32_MAX).apply(true); |
| |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = redLayer->getHandle(); |
| captureArgs.frameScaleX = INT32_MAX / 60; |
| captureArgs.frameScaleY = INT32_MAX / 60; |
| |
| ScreenCaptureResults captureResults; |
| ASSERT_EQ(BAD_VALUE, ScreenCapture::captureLayers(captureArgs, captureResults)); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureSecureLayer) { |
| sp<SurfaceControl> redLayer = createLayer(String8("Red surface"), 60, 60, |
| ISurfaceComposerClient::eFXSurfaceBufferState); |
| sp<SurfaceControl> secureLayer = |
| createLayer(String8("Secure surface"), 30, 30, |
| ISurfaceComposerClient::eSecure | |
| ISurfaceComposerClient::eFXSurfaceBufferState, |
| redLayer.get()); |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(redLayer, Color::RED, 60, 60)); |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(secureLayer, Color::BLUE, 30, 30)); |
| |
| auto redLayerHandle = redLayer->getHandle(); |
| Transaction() |
| .show(redLayer) |
| .show(secureLayer) |
| .setLayerStack(redLayer, 0) |
| .setLayer(redLayer, INT32_MAX) |
| .apply(); |
| |
| LayerCaptureArgs args; |
| args.layerHandle = redLayerHandle; |
| args.childrenOnly = false; |
| ScreenCaptureResults captureResults; |
| |
| { |
| // Ensure the UID is not root because root has all permissions |
| UIDFaker f(AID_APP_START); |
| // Call from outside system with secure layers will result in permission denied |
| ASSERT_EQ(PERMISSION_DENIED, ScreenCapture::captureLayers(args, captureResults)); |
| } |
| |
| UIDFaker f(AID_SYSTEM); |
| |
| // From system request, only red layer will be screenshot since the blue layer is secure. |
| // Black will be present where the secure layer is. |
| ScreenCapture::captureLayers(&mCapture, args); |
| mCapture->expectColor(Rect(0, 0, 30, 30), Color::BLACK); |
| mCapture->expectColor(Rect(30, 30, 60, 60), Color::RED); |
| |
| // Passing flag secure so the blue layer should be screenshot too. |
| args.captureSecureLayers = true; |
| ScreenCapture::captureLayers(&mCapture, args); |
| mCapture->expectColor(Rect(0, 0, 30, 30), Color::BLUE); |
| mCapture->expectColor(Rect(30, 30, 60, 60), Color::RED); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureDisplayWithUid) { |
| uid_t fakeUid = 12345; |
| |
| DisplayCaptureArgs captureArgs; |
| captureArgs.displayToken = mDisplay; |
| |
| sp<SurfaceControl> layer; |
| ASSERT_NO_FATAL_FAILURE(layer = createLayer("test layer", 32, 32, |
| ISurfaceComposerClient::eFXSurfaceBufferQueue, |
| mBGSurfaceControl.get())); |
| ASSERT_NO_FATAL_FAILURE(fillBufferQueueLayerColor(layer, Color::RED, 32, 32)); |
| |
| Transaction().show(layer).setLayer(layer, INT32_MAX).apply(); |
| |
| // Make sure red layer with the background layer is screenshot. |
| ScreenCapture::captureDisplay(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(0, 0, 32, 32), Color::RED); |
| mCapture->expectBorder(Rect(0, 0, 32, 32), {63, 63, 195, 255}); |
| |
| // From non system uid, can't request screenshot without a specified uid. |
| UIDFaker f(fakeUid); |
| ASSERT_EQ(PERMISSION_DENIED, ScreenCapture::captureDisplay(captureArgs, mCaptureResults)); |
| |
| // Make screenshot request with current uid set. No layers were created with the current |
| // uid so screenshot will be black. |
| captureArgs.uid = fakeUid; |
| ScreenCapture::captureDisplay(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(0, 0, 32, 32), Color::BLACK); |
| mCapture->expectBorder(Rect(0, 0, 32, 32), Color::BLACK); |
| |
| sp<SurfaceControl> layerWithFakeUid; |
| // Create a new layer with the current uid |
| ASSERT_NO_FATAL_FAILURE(layerWithFakeUid = |
| createLayer("new test layer", 32, 32, |
| ISurfaceComposerClient::eFXSurfaceBufferQueue, |
| mBGSurfaceControl.get())); |
| ASSERT_NO_FATAL_FAILURE(fillBufferQueueLayerColor(layerWithFakeUid, Color::GREEN, 32, 32)); |
| Transaction() |
| .show(layerWithFakeUid) |
| .setLayer(layerWithFakeUid, INT32_MAX) |
| .setPosition(layerWithFakeUid, 128, 128) |
| .apply(); |
| |
| // Screenshot from the fakeUid caller with the uid requested allows the layer |
| // with that uid to be screenshotted. Everything else is black |
| ScreenCapture::captureDisplay(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(128, 128, 160, 160), Color::GREEN); |
| mCapture->expectBorder(Rect(128, 128, 160, 160), Color::BLACK); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureDisplayPrimaryDisplayOnly) { |
| sp<SurfaceControl> layer; |
| ASSERT_NO_FATAL_FAILURE( |
| layer = createLayer("test layer", 0, 0, ISurfaceComposerClient::eFXSurfaceEffect)); |
| |
| const Color layerColor = Color::RED; |
| const Rect bounds = Rect(10, 10, 40, 40); |
| |
| Transaction() |
| .show(layer) |
| .hide(mFGSurfaceControl) |
| .setLayerStack(layer, 0) |
| .setLayer(layer, INT32_MAX) |
| .setColor(layer, {layerColor.r / 255, layerColor.g / 255, layerColor.b / 255}) |
| .setCrop(layer, bounds) |
| .apply(); |
| |
| DisplayCaptureArgs captureArgs; |
| captureArgs.displayToken = mDisplay; |
| |
| { |
| ScreenCapture::captureDisplay(&mCapture, captureArgs); |
| mCapture->expectColor(bounds, layerColor); |
| mCapture->expectBorder(bounds, {63, 63, 195, 255}); |
| } |
| |
| Transaction() |
| .setFlags(layer, layer_state_t::eLayerSkipScreenshot, |
| layer_state_t::eLayerSkipScreenshot) |
| .apply(); |
| |
| { |
| // Can't screenshot test layer since it now has flag |
| // eLayerSkipScreenshot |
| ScreenCapture::captureDisplay(&mCapture, captureArgs); |
| mCapture->expectColor(bounds, {63, 63, 195, 255}); |
| mCapture->expectBorder(bounds, {63, 63, 195, 255}); |
| } |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureDisplayChildPrimaryDisplayOnly) { |
| sp<SurfaceControl> layer; |
| sp<SurfaceControl> childLayer; |
| ASSERT_NO_FATAL_FAILURE( |
| layer = createLayer("test layer", 0, 0, ISurfaceComposerClient::eFXSurfaceEffect)); |
| ASSERT_NO_FATAL_FAILURE(childLayer = createLayer("test layer", 0, 0, |
| ISurfaceComposerClient::eFXSurfaceEffect, |
| layer.get())); |
| |
| const Color layerColor = Color::RED; |
| const Color childColor = Color::BLUE; |
| const Rect bounds = Rect(10, 10, 40, 40); |
| const Rect childBounds = Rect(20, 20, 30, 30); |
| |
| Transaction() |
| .show(layer) |
| .show(childLayer) |
| .hide(mFGSurfaceControl) |
| .setLayerStack(layer, 0) |
| .setLayer(layer, INT32_MAX) |
| .setColor(layer, {layerColor.r / 255, layerColor.g / 255, layerColor.b / 255}) |
| .setColor(childLayer, {childColor.r / 255, childColor.g / 255, childColor.b / 255}) |
| .setCrop(layer, bounds) |
| .setCrop(childLayer, childBounds) |
| .apply(); |
| |
| DisplayCaptureArgs captureArgs; |
| captureArgs.displayToken = mDisplay; |
| |
| { |
| ScreenCapture::captureDisplay(&mCapture, captureArgs); |
| mCapture->expectColor(childBounds, childColor); |
| mCapture->expectBorder(childBounds, layerColor); |
| mCapture->expectBorder(bounds, {63, 63, 195, 255}); |
| } |
| |
| Transaction() |
| .setFlags(layer, layer_state_t::eLayerSkipScreenshot, |
| layer_state_t::eLayerSkipScreenshot) |
| .apply(); |
| |
| { |
| // Can't screenshot child layer since the parent has the flag |
| // eLayerSkipScreenshot |
| ScreenCapture::captureDisplay(&mCapture, captureArgs); |
| mCapture->expectColor(childBounds, {63, 63, 195, 255}); |
| mCapture->expectBorder(childBounds, {63, 63, 195, 255}); |
| mCapture->expectBorder(bounds, {63, 63, 195, 255}); |
| } |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureLayerWithUid) { |
| uid_t fakeUid = 12345; |
| |
| sp<SurfaceControl> layer; |
| ASSERT_NO_FATAL_FAILURE(layer = createLayer("test layer", 32, 32, |
| ISurfaceComposerClient::eFXSurfaceBufferQueue, |
| mBGSurfaceControl.get())); |
| ASSERT_NO_FATAL_FAILURE(fillBufferQueueLayerColor(layer, Color::RED, 32, 32)); |
| |
| Transaction().show(layer).setLayer(layer, INT32_MAX).apply(); |
| |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = mBGSurfaceControl->getHandle(); |
| captureArgs.childrenOnly = false; |
| |
| // Make sure red layer with the background layer is screenshot. |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(0, 0, 32, 32), Color::RED); |
| mCapture->expectBorder(Rect(0, 0, 32, 32), {63, 63, 195, 255}); |
| |
| // From non system uid, can't request screenshot without a specified uid. |
| std::unique_ptr<UIDFaker> uidFaker = std::make_unique<UIDFaker>(fakeUid); |
| |
| ASSERT_EQ(PERMISSION_DENIED, ScreenCapture::captureLayers(captureArgs, mCaptureResults)); |
| |
| // Make screenshot request with current uid set. No layers were created with the current |
| // uid so screenshot will be black. |
| captureArgs.uid = fakeUid; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(0, 0, 32, 32), Color::TRANSPARENT); |
| mCapture->expectBorder(Rect(0, 0, 32, 32), Color::TRANSPARENT); |
| |
| sp<SurfaceControl> layerWithFakeUid; |
| // Create a new layer with the current uid |
| ASSERT_NO_FATAL_FAILURE(layerWithFakeUid = |
| createLayer("new test layer", 32, 32, |
| ISurfaceComposerClient::eFXSurfaceBufferQueue, |
| mBGSurfaceControl.get())); |
| ASSERT_NO_FATAL_FAILURE(fillBufferQueueLayerColor(layerWithFakeUid, Color::GREEN, 32, 32)); |
| Transaction() |
| .show(layerWithFakeUid) |
| .setLayer(layerWithFakeUid, INT32_MAX) |
| .setPosition(layerWithFakeUid, 128, 128) |
| // reparent a layer that was created with a different uid to the new layer. |
| .reparent(layer, layerWithFakeUid) |
| .apply(); |
| |
| // Screenshot from the fakeUid caller with the uid requested allows the layer |
| // with that uid to be screenshotted. The child layer is skipped since it was created |
| // from a different uid. |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(128, 128, 160, 160), Color::GREEN); |
| mCapture->expectBorder(Rect(128, 128, 160, 160), Color::TRANSPARENT); |
| |
| // Clear fake calling uid so it's back to system. |
| uidFaker = nullptr; |
| // Screenshot from the test caller with the uid requested allows the layer |
| // with that uid to be screenshotted. The child layer is skipped since it was created |
| // from a different uid. |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(128, 128, 160, 160), Color::GREEN); |
| mCapture->expectBorder(Rect(128, 128, 160, 160), Color::TRANSPARENT); |
| |
| // Screenshot from the fakeUid caller with no uid requested allows everything to be screenshot. |
| captureArgs.uid = -1; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(128, 128, 160, 160), Color::RED); |
| mCapture->expectBorder(Rect(128, 128, 160, 160), {63, 63, 195, 255}); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureWithGrayscale) { |
| sp<SurfaceControl> layer; |
| ASSERT_NO_FATAL_FAILURE(layer = createLayer("test layer", 32, 32, |
| ISurfaceComposerClient::eFXSurfaceBufferState, |
| mBGSurfaceControl.get())); |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(layer, Color::RED, 32, 32)); |
| Transaction().show(layer).setLayer(layer, INT32_MAX).apply(); |
| |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = layer->getHandle(); |
| |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectColor(Rect(0, 0, 32, 32), Color::RED); |
| |
| captureArgs.grayscale = true; |
| |
| const uint8_t tolerance = 1; |
| |
| // Values based on SurfaceFlinger::calculateColorMatrix |
| float3 luminance{0.213f, 0.715f, 0.072f}; |
| |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| |
| uint8_t expectedColor = luminance.r * 255; |
| mCapture->expectColor(Rect(0, 0, 32, 32), |
| Color{expectedColor, expectedColor, expectedColor, 255}, tolerance); |
| |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(layer, Color::BLUE, 32, 32)); |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| |
| expectedColor = luminance.b * 255; |
| mCapture->expectColor(Rect(0, 0, 32, 32), |
| Color{expectedColor, expectedColor, expectedColor, 255}, tolerance); |
| } |
| |
| TEST_F(ScreenCaptureTest, CaptureOffscreen) { |
| sp<SurfaceControl> layer; |
| ASSERT_NO_FATAL_FAILURE(layer = createLayer("test layer", 32, 32, |
| ISurfaceComposerClient::eFXSurfaceBufferState, |
| mBGSurfaceControl.get())); |
| ASSERT_NO_FATAL_FAILURE(fillBufferStateLayerColor(layer, Color::RED, 32, 32)); |
| |
| Transaction().show(layer).hide(mFGSurfaceControl).reparent(layer, nullptr).apply(); |
| |
| DisplayCaptureArgs displayCaptureArgs; |
| displayCaptureArgs.displayToken = mDisplay; |
| |
| { |
| // Validate that the red layer is not on screen |
| ScreenCapture::captureDisplay(&mCapture, displayCaptureArgs); |
| mCapture->expectColor(Rect(0, 0, mDisplaySize.width, mDisplaySize.height), |
| {63, 63, 195, 255}); |
| } |
| |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = layer->getHandle(); |
| |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->expectSize(32, 32); |
| mCapture->expectColor(Rect(0, 0, 32, 32), Color::RED); |
| } |
| |
| // In the following tests we verify successful skipping of a parent layer, |
| // so we use the same verification logic and only change how we mutate |
| // the parent layer to verify that various properties are ignored. |
| class ScreenCaptureChildOnlyTest : public ScreenCaptureTest { |
| public: |
| void SetUp() override { |
| ScreenCaptureTest::SetUp(); |
| |
| mChild = createSurface(mClient, "Child surface", 10, 10, PIXEL_FORMAT_RGBA_8888, 0, |
| mFGSurfaceControl.get()); |
| TransactionUtils::fillSurfaceRGBA8(mChild, 200, 200, 200); |
| |
| SurfaceComposerClient::Transaction().show(mChild).apply(true); |
| } |
| |
| void verify(std::function<void()> verifyStartingState) { |
| // Verify starting state before a screenshot is taken. |
| verifyStartingState(); |
| |
| // Verify child layer does not inherit any of the properties of its |
| // parent when its screenshot is captured. |
| LayerCaptureArgs captureArgs; |
| captureArgs.layerHandle = mFGSurfaceControl->getHandle(); |
| captureArgs.childrenOnly = true; |
| ScreenCapture::captureLayers(&mCapture, captureArgs); |
| mCapture->checkPixel(10, 10, 0, 0, 0); |
| mCapture->expectChildColor(0, 0); |
| |
| // Verify all assumptions are still true after the screenshot is taken. |
| verifyStartingState(); |
| } |
| |
| std::unique_ptr<ScreenCapture> mCapture; |
| sp<SurfaceControl> mChild; |
| }; |
| |
| // Regression test b/76099859 |
| TEST_F(ScreenCaptureChildOnlyTest, CaptureLayerIgnoresParentVisibility) { |
| SurfaceComposerClient::Transaction().hide(mFGSurfaceControl).apply(true); |
| |
| // Even though the parent is hidden we should still capture the child. |
| |
| // Before and after reparenting, verify child is properly hidden |
| // when rendering full-screen. |
| verify([&] { screenshot()->expectBGColor(64, 64); }); |
| } |
| |
| TEST_F(ScreenCaptureChildOnlyTest, CaptureLayerIgnoresParentCrop) { |
| SurfaceComposerClient::Transaction().setCrop(mFGSurfaceControl, Rect(0, 0, 1, 1)).apply(true); |
| |
| // Even though the parent is cropped out we should still capture the child. |
| |
| // Before and after reparenting, verify child is cropped by parent. |
| verify([&] { screenshot()->expectBGColor(65, 65); }); |
| } |
| |
| // Regression test b/124372894 |
| TEST_F(ScreenCaptureChildOnlyTest, CaptureLayerIgnoresTransform) { |
| SurfaceComposerClient::Transaction().setMatrix(mFGSurfaceControl, 2, 0, 0, 2).apply(true); |
| |
| // We should not inherit the parent scaling. |
| |
| // Before and after reparenting, verify child is properly scaled. |
| verify([&] { screenshot()->expectChildColor(80, 80); }); |
| } |
| |
| } // namespace android |
| |
| // TODO(b/129481165): remove the #pragma below and fix conversion issues |
| #pragma clang diagnostic pop // ignored "-Wconversion" |