| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <inttypes.h> |
| #include <math.h> |
| #include <stdint.h> |
| #include <sys/types.h> |
| #include <sys/socket.h> |
| |
| #include <cutils/properties.h> |
| |
| #include <utils/SortedVector.h> |
| #include <utils/KeyedVector.h> |
| #include <utils/threads.h> |
| #include <utils/Atomic.h> |
| #include <utils/Errors.h> |
| #include <utils/RefBase.h> |
| #include <utils/Singleton.h> |
| #include <utils/String16.h> |
| |
| #include <binder/BinderService.h> |
| #include <binder/IServiceManager.h> |
| #include <binder/PermissionCache.h> |
| |
| #include <gui/ISensorServer.h> |
| #include <gui/ISensorEventConnection.h> |
| #include <gui/SensorEventQueue.h> |
| |
| #include <hardware/sensors.h> |
| #include <hardware_legacy/power.h> |
| |
| #include "BatteryService.h" |
| #include "CorrectedGyroSensor.h" |
| #include "GravitySensor.h" |
| #include "LinearAccelerationSensor.h" |
| #include "OrientationSensor.h" |
| #include "RotationVectorSensor.h" |
| #include "SensorFusion.h" |
| #include "SensorService.h" |
| |
| namespace android { |
| // --------------------------------------------------------------------------- |
| |
| /* |
| * Notes: |
| * |
| * - what about a gyro-corrected magnetic-field sensor? |
| * - run mag sensor from time to time to force calibration |
| * - gravity sensor length is wrong (=> drift in linear-acc sensor) |
| * |
| */ |
| |
| const char* SensorService::WAKE_LOCK_NAME = "SensorService"; |
| |
| SensorService::SensorService() |
| : mInitCheck(NO_INIT) |
| { |
| } |
| |
| void SensorService::onFirstRef() |
| { |
| ALOGD("nuSensorService starting..."); |
| |
| SensorDevice& dev(SensorDevice::getInstance()); |
| |
| if (dev.initCheck() == NO_ERROR) { |
| sensor_t const* list; |
| ssize_t count = dev.getSensorList(&list); |
| if (count > 0) { |
| ssize_t orientationIndex = -1; |
| bool hasGyro = false; |
| uint32_t virtualSensorsNeeds = |
| (1<<SENSOR_TYPE_GRAVITY) | |
| (1<<SENSOR_TYPE_LINEAR_ACCELERATION) | |
| (1<<SENSOR_TYPE_ROTATION_VECTOR); |
| |
| mLastEventSeen.setCapacity(count); |
| for (ssize_t i=0 ; i<count ; i++) { |
| registerSensor( new HardwareSensor(list[i]) ); |
| switch (list[i].type) { |
| case SENSOR_TYPE_ORIENTATION: |
| orientationIndex = i; |
| break; |
| case SENSOR_TYPE_GYROSCOPE: |
| case SENSOR_TYPE_GYROSCOPE_UNCALIBRATED: |
| hasGyro = true; |
| break; |
| case SENSOR_TYPE_GRAVITY: |
| case SENSOR_TYPE_LINEAR_ACCELERATION: |
| case SENSOR_TYPE_ROTATION_VECTOR: |
| virtualSensorsNeeds &= ~(1<<list[i].type); |
| break; |
| } |
| } |
| |
| // it's safe to instantiate the SensorFusion object here |
| // (it wants to be instantiated after h/w sensors have been |
| // registered) |
| const SensorFusion& fusion(SensorFusion::getInstance()); |
| |
| // build the sensor list returned to users |
| mUserSensorList = mSensorList; |
| |
| if (hasGyro) { |
| Sensor aSensor; |
| |
| // Add Android virtual sensors if they're not already |
| // available in the HAL |
| |
| aSensor = registerVirtualSensor( new RotationVectorSensor() ); |
| if (virtualSensorsNeeds & (1<<SENSOR_TYPE_ROTATION_VECTOR)) { |
| mUserSensorList.add(aSensor); |
| } |
| |
| aSensor = registerVirtualSensor( new GravitySensor(list, count) ); |
| if (virtualSensorsNeeds & (1<<SENSOR_TYPE_GRAVITY)) { |
| mUserSensorList.add(aSensor); |
| } |
| |
| aSensor = registerVirtualSensor( new LinearAccelerationSensor(list, count) ); |
| if (virtualSensorsNeeds & (1<<SENSOR_TYPE_LINEAR_ACCELERATION)) { |
| mUserSensorList.add(aSensor); |
| } |
| |
| aSensor = registerVirtualSensor( new OrientationSensor() ); |
| if (virtualSensorsNeeds & (1<<SENSOR_TYPE_ROTATION_VECTOR)) { |
| // if we are doing our own rotation-vector, also add |
| // the orientation sensor and remove the HAL provided one. |
| mUserSensorList.replaceAt(aSensor, orientationIndex); |
| } |
| |
| // virtual debugging sensors are not added to mUserSensorList |
| registerVirtualSensor( new CorrectedGyroSensor(list, count) ); |
| registerVirtualSensor( new GyroDriftSensor() ); |
| } |
| |
| // debugging sensor list |
| mUserSensorListDebug = mSensorList; |
| |
| // Check if the device really supports batching by looking at the FIFO event |
| // counts for each sensor. |
| bool batchingSupported = false; |
| for (int i = 0; i < mSensorList.size(); ++i) { |
| if (mSensorList[i].getFifoMaxEventCount() > 0) { |
| batchingSupported = true; |
| break; |
| } |
| } |
| |
| if (batchingSupported) { |
| // Increase socket buffer size to a max of 100 KB for batching capabilities. |
| mSocketBufferSize = MAX_SOCKET_BUFFER_SIZE_BATCHED; |
| } else { |
| mSocketBufferSize = SOCKET_BUFFER_SIZE_NON_BATCHED; |
| } |
| |
| // Compare the socketBufferSize value against the system limits and limit |
| // it to maxSystemSocketBufferSize if necessary. |
| FILE *fp = fopen("/proc/sys/net/core/wmem_max", "r"); |
| char line[128]; |
| if (fp != NULL && fgets(line, sizeof(line), fp) != NULL) { |
| line[sizeof(line) - 1] = '\0'; |
| size_t maxSystemSocketBufferSize; |
| sscanf(line, "%zu", &maxSystemSocketBufferSize); |
| if (mSocketBufferSize > maxSystemSocketBufferSize) { |
| mSocketBufferSize = maxSystemSocketBufferSize; |
| } |
| } |
| if (fp) { |
| fclose(fp); |
| } |
| |
| mWakeLockAcquired = false; |
| run("SensorService", PRIORITY_URGENT_DISPLAY); |
| mLooper = new Looper(false); |
| mInitCheck = NO_ERROR; |
| } |
| } |
| } |
| |
| Sensor SensorService::registerSensor(SensorInterface* s) |
| { |
| sensors_event_t event; |
| memset(&event, 0, sizeof(event)); |
| |
| const Sensor sensor(s->getSensor()); |
| // add to the sensor list (returned to clients) |
| mSensorList.add(sensor); |
| // add to our handle->SensorInterface mapping |
| mSensorMap.add(sensor.getHandle(), s); |
| // create an entry in the mLastEventSeen array |
| mLastEventSeen.add(sensor.getHandle(), event); |
| |
| return sensor; |
| } |
| |
| Sensor SensorService::registerVirtualSensor(SensorInterface* s) |
| { |
| Sensor sensor = registerSensor(s); |
| mVirtualSensorList.add( s ); |
| return sensor; |
| } |
| |
| SensorService::~SensorService() |
| { |
| for (size_t i=0 ; i<mSensorMap.size() ; i++) |
| delete mSensorMap.valueAt(i); |
| } |
| |
| static const String16 sDump("android.permission.DUMP"); |
| |
| status_t SensorService::dump(int fd, const Vector<String16>& /*args*/) |
| { |
| String8 result; |
| if (!PermissionCache::checkCallingPermission(sDump)) { |
| result.appendFormat("Permission Denial: " |
| "can't dump SensorService from pid=%d, uid=%d\n", |
| IPCThreadState::self()->getCallingPid(), |
| IPCThreadState::self()->getCallingUid()); |
| } else { |
| Mutex::Autolock _l(mLock); |
| result.append("Sensor List:\n"); |
| for (size_t i=0 ; i<mSensorList.size() ; i++) { |
| const Sensor& s(mSensorList[i]); |
| const sensors_event_t& e(mLastEventSeen.valueFor(s.getHandle())); |
| result.appendFormat( |
| "%-15s| %-10s| %-20s| 0x%08x | \"%s\" | type=%d |", |
| s.getName().string(), |
| s.getVendor().string(), |
| s.getStringType().string(), |
| s.getHandle(), |
| s.getRequiredPermission().string(), |
| s.getType()); |
| |
| const int reportingMode = s.getReportingMode(); |
| if (reportingMode == AREPORTING_MODE_CONTINUOUS) { |
| result.append(" continuous | "); |
| } else if (reportingMode == AREPORTING_MODE_ON_CHANGE) { |
| result.append(" on-change | "); |
| } else if (reportingMode == AREPORTING_MODE_ONE_SHOT) { |
| result.append(" one-shot | "); |
| } else { |
| result.append(" special-trigger | "); |
| } |
| |
| if (s.getMaxDelay() > 0) { |
| result.appendFormat("minRate=%.2fHz | ", 1e6f / s.getMaxDelay()); |
| } else { |
| result.appendFormat("maxDelay=%dus |", s.getMaxDelay()); |
| } |
| |
| if (s.getMinDelay() > 0) { |
| result.appendFormat("maxRate=%.2fHz | ", 1e6f / s.getMinDelay()); |
| } else { |
| result.appendFormat("minDelay=%dus |", s.getMinDelay()); |
| } |
| |
| if (s.getFifoMaxEventCount() > 0) { |
| result.appendFormat("FifoMax=%d events | ", |
| s.getFifoMaxEventCount()); |
| } else { |
| result.append("no batching | "); |
| } |
| |
| if (s.isWakeUpSensor()) { |
| result.appendFormat("wakeUp | "); |
| } else { |
| result.appendFormat("non-wakeUp | "); |
| } |
| |
| switch (s.getType()) { |
| case SENSOR_TYPE_ROTATION_VECTOR: |
| case SENSOR_TYPE_GEOMAGNETIC_ROTATION_VECTOR: |
| result.appendFormat( |
| "last=<%5.1f,%5.1f,%5.1f,%5.1f,%5.1f, %" PRId64 ">\n", |
| e.data[0], e.data[1], e.data[2], e.data[3], e.data[4], e.timestamp); |
| break; |
| case SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED: |
| case SENSOR_TYPE_GYROSCOPE_UNCALIBRATED: |
| result.appendFormat( |
| "last=<%5.1f,%5.1f,%5.1f,%5.1f,%5.1f,%5.1f, %" PRId64 ">\n", |
| e.data[0], e.data[1], e.data[2], e.data[3], e.data[4], e.data[5], |
| e.timestamp); |
| break; |
| case SENSOR_TYPE_GAME_ROTATION_VECTOR: |
| result.appendFormat( |
| "last=<%5.1f,%5.1f,%5.1f,%5.1f, %" PRId64 ">\n", |
| e.data[0], e.data[1], e.data[2], e.data[3], e.timestamp); |
| break; |
| case SENSOR_TYPE_SIGNIFICANT_MOTION: |
| case SENSOR_TYPE_STEP_DETECTOR: |
| result.appendFormat( "last=<%f %" PRId64 ">\n", e.data[0], e.timestamp); |
| break; |
| case SENSOR_TYPE_STEP_COUNTER: |
| result.appendFormat( "last=<%" PRIu64 ", %" PRId64 ">\n", e.u64.step_counter, |
| e.timestamp); |
| break; |
| default: |
| // default to 3 values |
| result.appendFormat( |
| "last=<%5.1f,%5.1f,%5.1f, %" PRId64 ">\n", |
| e.data[0], e.data[1], e.data[2], e.timestamp); |
| break; |
| } |
| result.append("\n"); |
| } |
| SensorFusion::getInstance().dump(result); |
| SensorDevice::getInstance().dump(result); |
| |
| result.append("Active sensors:\n"); |
| for (size_t i=0 ; i<mActiveSensors.size() ; i++) { |
| int handle = mActiveSensors.keyAt(i); |
| result.appendFormat("%s (handle=0x%08x, connections=%zu)\n", |
| getSensorName(handle).string(), |
| handle, |
| mActiveSensors.valueAt(i)->getNumConnections()); |
| } |
| |
| result.appendFormat("Socket Buffer size = %d events\n", |
| mSocketBufferSize/sizeof(sensors_event_t)); |
| result.appendFormat("WakeLock Status: %s \n", mWakeLockAcquired ? "acquired" : "not held"); |
| result.appendFormat("%zd active connections\n", mActiveConnections.size()); |
| |
| for (size_t i=0 ; i < mActiveConnections.size() ; i++) { |
| sp<SensorEventConnection> connection(mActiveConnections[i].promote()); |
| if (connection != 0) { |
| result.appendFormat("Connection Number: %zu \n", i); |
| connection->dump(result); |
| } |
| } |
| } |
| write(fd, result.string(), result.size()); |
| return NO_ERROR; |
| } |
| |
| void SensorService::cleanupAutoDisabledSensorLocked(const sp<SensorEventConnection>& connection, |
| sensors_event_t const* buffer, const int count) { |
| for (int i=0 ; i<count ; i++) { |
| int handle = buffer[i].sensor; |
| if (connection->hasSensor(handle)) { |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| // If this buffer has an event from a one_shot sensor and this connection is registered |
| // for this particular one_shot sensor, try cleaning up the connection. |
| if (sensor != NULL && |
| sensor->getSensor().getReportingMode() == AREPORTING_MODE_ONE_SHOT) { |
| sensor->autoDisable(connection.get(), handle); |
| cleanupWithoutDisableLocked(connection, handle); |
| } |
| } |
| } |
| } |
| |
| bool SensorService::threadLoop() |
| { |
| ALOGD("nuSensorService thread starting..."); |
| |
| // each virtual sensor could generate an event per "real" event, that's why we need |
| // to size numEventMax much smaller than MAX_RECEIVE_BUFFER_EVENT_COUNT. |
| // in practice, this is too aggressive, but guaranteed to be enough. |
| const size_t minBufferSize = SensorEventQueue::MAX_RECEIVE_BUFFER_EVENT_COUNT; |
| const size_t numEventMax = minBufferSize / (1 + mVirtualSensorList.size()); |
| |
| sensors_event_t buffer[minBufferSize]; |
| sensors_event_t scratch[minBufferSize]; |
| SensorDevice& device(SensorDevice::getInstance()); |
| const size_t vcount = mVirtualSensorList.size(); |
| |
| SensorEventAckReceiver sender(this); |
| sender.run("SensorEventAckReceiver", PRIORITY_URGENT_DISPLAY); |
| ssize_t count; |
| const int halVersion = device.getHalDeviceVersion(); |
| do { |
| count = device.poll(buffer, numEventMax); |
| if (count<0) { |
| ALOGE("sensor poll failed (%s)", strerror(-count)); |
| break; |
| } |
| |
| // Reset sensors_event_t.flags to zero for all events in the buffer. |
| for (int i = 0; i < count; i++) { |
| buffer[i].flags = 0; |
| } |
| Mutex::Autolock _l(mLock); |
| // Poll has returned. Hold a wakelock if one of the events is from a wake up sensor. The |
| // rest of this loop is under a critical section protected by mLock. Acquiring a wakeLock, |
| // sending events to clients (incrementing SensorEventConnection::mWakeLockRefCount) should |
| // not be interleaved with decrementing SensorEventConnection::mWakeLockRefCount and |
| // releasing the wakelock. |
| bool bufferHasWakeUpEvent = false; |
| for (int i = 0; i < count; i++) { |
| if (isWakeUpSensorEvent(buffer[i])) { |
| bufferHasWakeUpEvent = true; |
| break; |
| } |
| } |
| |
| if (bufferHasWakeUpEvent && !mWakeLockAcquired) { |
| acquire_wake_lock(PARTIAL_WAKE_LOCK, WAKE_LOCK_NAME); |
| mWakeLockAcquired = true; |
| ALOGD_IF(DEBUG_CONNECTIONS, "acquired wakelock %s", WAKE_LOCK_NAME); |
| } |
| recordLastValueLocked(buffer, count); |
| |
| // handle virtual sensors |
| if (count && vcount) { |
| sensors_event_t const * const event = buffer; |
| const size_t activeVirtualSensorCount = mActiveVirtualSensors.size(); |
| if (activeVirtualSensorCount) { |
| size_t k = 0; |
| SensorFusion& fusion(SensorFusion::getInstance()); |
| if (fusion.isEnabled()) { |
| for (size_t i=0 ; i<size_t(count) ; i++) { |
| fusion.process(event[i]); |
| } |
| } |
| for (size_t i=0 ; i<size_t(count) && k<minBufferSize ; i++) { |
| for (size_t j=0 ; j<activeVirtualSensorCount ; j++) { |
| if (count + k >= minBufferSize) { |
| ALOGE("buffer too small to hold all events: " |
| "count=%zd, k=%zu, size=%zu", |
| count, k, minBufferSize); |
| break; |
| } |
| sensors_event_t out; |
| SensorInterface* si = mActiveVirtualSensors.valueAt(j); |
| if (si->process(&out, event[i])) { |
| buffer[count + k] = out; |
| k++; |
| } |
| } |
| } |
| if (k) { |
| // record the last synthesized values |
| recordLastValueLocked(&buffer[count], k); |
| count += k; |
| // sort the buffer by time-stamps |
| sortEventBuffer(buffer, count); |
| } |
| } |
| } |
| |
| // handle backward compatibility for RotationVector sensor |
| if (halVersion < SENSORS_DEVICE_API_VERSION_1_0) { |
| for (int i = 0; i < count; i++) { |
| if (buffer[i].type == SENSOR_TYPE_ROTATION_VECTOR) { |
| // All the 4 components of the quaternion should be available |
| // No heading accuracy. Set it to -1 |
| buffer[i].data[4] = -1; |
| } |
| } |
| } |
| |
| // Send our events to clients. Check the state of wake lock for each client and release the |
| // lock if none of the clients need it. |
| bool needsWakeLock = false; |
| for (size_t i=0 ; i < mActiveConnections.size(); i++) { |
| sp<SensorEventConnection> connection(mActiveConnections[i].promote()); |
| if (connection != 0) { |
| connection->sendEvents(buffer, count, scratch); |
| needsWakeLock |= connection->needsWakeLock(); |
| // Some sensors need to be auto disabled after the trigger |
| cleanupAutoDisabledSensorLocked(connection, buffer, count); |
| } |
| } |
| |
| if (mWakeLockAcquired && !needsWakeLock) { |
| release_wake_lock(WAKE_LOCK_NAME); |
| mWakeLockAcquired = false; |
| ALOGD_IF(DEBUG_CONNECTIONS, "released wakelock %s", WAKE_LOCK_NAME); |
| } |
| } while (count >= 0 || Thread::exitPending()); |
| |
| ALOGW("Exiting SensorService::threadLoop => aborting..."); |
| abort(); |
| return false; |
| } |
| |
| sp<Looper> SensorService::getLooper() const { |
| return mLooper; |
| } |
| |
| bool SensorService::SensorEventAckReceiver::threadLoop() { |
| ALOGD("new thread SensorEventAckReceiver"); |
| do { |
| sp<Looper> looper = mService->getLooper(); |
| looper->pollOnce(-1); |
| } while(!Thread::exitPending()); |
| return false; |
| } |
| |
| void SensorService::recordLastValueLocked( |
| const sensors_event_t* buffer, size_t count) { |
| const sensors_event_t* last = NULL; |
| for (size_t i = 0; i < count; i++) { |
| const sensors_event_t* event = &buffer[i]; |
| if (event->type != SENSOR_TYPE_META_DATA) { |
| if (last && event->sensor != last->sensor) { |
| mLastEventSeen.editValueFor(last->sensor) = *last; |
| } |
| last = event; |
| } |
| } |
| if (last) { |
| mLastEventSeen.editValueFor(last->sensor) = *last; |
| } |
| } |
| |
| void SensorService::sortEventBuffer(sensors_event_t* buffer, size_t count) |
| { |
| struct compar { |
| static int cmp(void const* lhs, void const* rhs) { |
| sensors_event_t const* l = static_cast<sensors_event_t const*>(lhs); |
| sensors_event_t const* r = static_cast<sensors_event_t const*>(rhs); |
| return l->timestamp - r->timestamp; |
| } |
| }; |
| qsort(buffer, count, sizeof(sensors_event_t), compar::cmp); |
| } |
| |
| String8 SensorService::getSensorName(int handle) const { |
| size_t count = mUserSensorList.size(); |
| for (size_t i=0 ; i<count ; i++) { |
| const Sensor& sensor(mUserSensorList[i]); |
| if (sensor.getHandle() == handle) { |
| return sensor.getName(); |
| } |
| } |
| String8 result("unknown"); |
| return result; |
| } |
| |
| bool SensorService::isVirtualSensor(int handle) const { |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| return sensor->isVirtual(); |
| } |
| |
| bool SensorService::isWakeUpSensorEvent(const sensors_event_t& event) const { |
| int handle = event.sensor; |
| if (event.type == SENSOR_TYPE_META_DATA) { |
| handle = event.meta_data.sensor; |
| } |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| return sensor != NULL && sensor->getSensor().isWakeUpSensor(); |
| } |
| |
| |
| SensorService::SensorRecord * SensorService::getSensorRecord(int handle) { |
| return mActiveSensors.valueFor(handle); |
| } |
| |
| Vector<Sensor> SensorService::getSensorList() |
| { |
| char value[PROPERTY_VALUE_MAX]; |
| property_get("debug.sensors", value, "0"); |
| const Vector<Sensor>& initialSensorList = (atoi(value)) ? |
| mUserSensorListDebug : mUserSensorList; |
| Vector<Sensor> accessibleSensorList; |
| for (size_t i = 0; i < initialSensorList.size(); i++) { |
| Sensor sensor = initialSensorList[i]; |
| if (canAccessSensor(sensor)) { |
| accessibleSensorList.add(sensor); |
| } else { |
| String8 infoMessage; |
| infoMessage.appendFormat( |
| "Skipped sensor %s because it requires permission %s", |
| sensor.getName().string(), |
| sensor.getRequiredPermission().string()); |
| ALOGI(infoMessage.string()); |
| } |
| } |
| return accessibleSensorList; |
| } |
| |
| sp<ISensorEventConnection> SensorService::createSensorEventConnection() |
| { |
| uid_t uid = IPCThreadState::self()->getCallingUid(); |
| sp<SensorEventConnection> result(new SensorEventConnection(this, uid)); |
| return result; |
| } |
| |
| void SensorService::cleanupConnection(SensorEventConnection* c) |
| { |
| Mutex::Autolock _l(mLock); |
| const wp<SensorEventConnection> connection(c); |
| size_t size = mActiveSensors.size(); |
| ALOGD_IF(DEBUG_CONNECTIONS, "%zu active sensors", size); |
| for (size_t i=0 ; i<size ; ) { |
| int handle = mActiveSensors.keyAt(i); |
| if (c->hasSensor(handle)) { |
| ALOGD_IF(DEBUG_CONNECTIONS, "%zu: disabling handle=0x%08x", i, handle); |
| SensorInterface* sensor = mSensorMap.valueFor( handle ); |
| ALOGE_IF(!sensor, "mSensorMap[handle=0x%08x] is null!", handle); |
| if (sensor) { |
| sensor->activate(c, false); |
| } |
| } |
| SensorRecord* rec = mActiveSensors.valueAt(i); |
| ALOGE_IF(!rec, "mActiveSensors[%zu] is null (handle=0x%08x)!", i, handle); |
| ALOGD_IF(DEBUG_CONNECTIONS, |
| "removing connection %p for sensor[%zu].handle=0x%08x", |
| c, i, handle); |
| |
| if (rec && rec->removeConnection(connection)) { |
| ALOGD_IF(DEBUG_CONNECTIONS, "... and it was the last connection"); |
| mActiveSensors.removeItemsAt(i, 1); |
| mActiveVirtualSensors.removeItem(handle); |
| delete rec; |
| size--; |
| } else { |
| i++; |
| } |
| } |
| mActiveConnections.remove(connection); |
| BatteryService::cleanup(c->getUid()); |
| if (c->needsWakeLock()) { |
| checkWakeLockStateLocked(); |
| } |
| } |
| |
| Sensor SensorService::getSensorFromHandle(int handle) const { |
| return mSensorMap.valueFor(handle)->getSensor(); |
| } |
| |
| status_t SensorService::enable(const sp<SensorEventConnection>& connection, |
| int handle, nsecs_t samplingPeriodNs, nsecs_t maxBatchReportLatencyNs, int reservedFlags) |
| { |
| if (mInitCheck != NO_ERROR) |
| return mInitCheck; |
| |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| if (sensor == NULL) { |
| return BAD_VALUE; |
| } |
| |
| if (!verifyCanAccessSensor(sensor->getSensor(), "Tried enabling")) { |
| return BAD_VALUE; |
| } |
| |
| Mutex::Autolock _l(mLock); |
| SensorRecord* rec = mActiveSensors.valueFor(handle); |
| if (rec == 0) { |
| rec = new SensorRecord(connection); |
| mActiveSensors.add(handle, rec); |
| if (sensor->isVirtual()) { |
| mActiveVirtualSensors.add(handle, sensor); |
| } |
| } else { |
| if (rec->addConnection(connection)) { |
| // this sensor is already activated, but we are adding a connection that uses it. |
| // Immediately send down the last known value of the requested sensor if it's not a |
| // "continuous" sensor. |
| if (sensor->getSensor().getReportingMode() == AREPORTING_MODE_ON_CHANGE) { |
| // NOTE: The wake_up flag of this event may get set to |
| // WAKE_UP_SENSOR_EVENT_NEEDS_ACK if this is a wake_up event. |
| sensors_event_t& event(mLastEventSeen.editValueFor(handle)); |
| if (event.version == sizeof(sensors_event_t)) { |
| if (isWakeUpSensorEvent(event) && !mWakeLockAcquired) { |
| acquire_wake_lock(PARTIAL_WAKE_LOCK, WAKE_LOCK_NAME); |
| mWakeLockAcquired = true; |
| ALOGD_IF(DEBUG_CONNECTIONS, "acquired wakelock for on_change sensor %s", |
| WAKE_LOCK_NAME); |
| } |
| connection->sendEvents(&event, 1, NULL); |
| if (!connection->needsWakeLock() && mWakeLockAcquired) { |
| checkWakeLockStateLocked(); |
| } |
| } |
| } |
| } |
| } |
| |
| if (connection->addSensor(handle)) { |
| BatteryService::enableSensor(connection->getUid(), handle); |
| // the sensor was added (which means it wasn't already there) |
| // so, see if this connection becomes active |
| if (mActiveConnections.indexOf(connection) < 0) { |
| mActiveConnections.add(connection); |
| } |
| } else { |
| ALOGW("sensor %08x already enabled in connection %p (ignoring)", |
| handle, connection.get()); |
| } |
| |
| nsecs_t minDelayNs = sensor->getSensor().getMinDelayNs(); |
| if (samplingPeriodNs < minDelayNs) { |
| samplingPeriodNs = minDelayNs; |
| } |
| |
| ALOGD_IF(DEBUG_CONNECTIONS, "Calling batch handle==%d flags=%d" |
| "rate=%" PRId64 " timeout== %" PRId64"", |
| handle, reservedFlags, samplingPeriodNs, maxBatchReportLatencyNs); |
| |
| status_t err = sensor->batch(connection.get(), handle, reservedFlags, samplingPeriodNs, |
| maxBatchReportLatencyNs); |
| |
| // Call flush() before calling activate() on the sensor. Wait for a first flush complete |
| // event before sending events on this connection. Ignore one-shot sensors which don't |
| // support flush(). Also if this sensor isn't already active, don't call flush(). |
| if (err == NO_ERROR && sensor->getSensor().getReportingMode() != AREPORTING_MODE_ONE_SHOT && |
| rec->getNumConnections() > 1) { |
| connection->setFirstFlushPending(handle, true); |
| status_t err_flush = sensor->flush(connection.get(), handle); |
| // Flush may return error if the underlying h/w sensor uses an older HAL. |
| if (err_flush == NO_ERROR) { |
| rec->addPendingFlushConnection(connection.get()); |
| } else { |
| connection->setFirstFlushPending(handle, false); |
| } |
| } |
| |
| if (err == NO_ERROR) { |
| ALOGD_IF(DEBUG_CONNECTIONS, "Calling activate on %d", handle); |
| err = sensor->activate(connection.get(), true); |
| } |
| |
| if (err == NO_ERROR && sensor->getSensor().isWakeUpSensor()) { |
| // Add the file descriptor to the Looper for receiving acknowledgments; |
| int ret = mLooper->addFd(connection->getSensorChannel()->getSendFd(), 0, |
| ALOOPER_EVENT_INPUT, connection.get(), NULL); |
| } |
| |
| if (err != NO_ERROR) { |
| // batch/activate has failed, reset our state. |
| cleanupWithoutDisableLocked(connection, handle); |
| } |
| return err; |
| } |
| |
| status_t SensorService::disable(const sp<SensorEventConnection>& connection, |
| int handle) |
| { |
| if (mInitCheck != NO_ERROR) |
| return mInitCheck; |
| |
| Mutex::Autolock _l(mLock); |
| status_t err = cleanupWithoutDisableLocked(connection, handle); |
| if (err == NO_ERROR) { |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| err = sensor ? sensor->activate(connection.get(), false) : status_t(BAD_VALUE); |
| } |
| return err; |
| } |
| |
| status_t SensorService::cleanupWithoutDisable( |
| const sp<SensorEventConnection>& connection, int handle) { |
| Mutex::Autolock _l(mLock); |
| return cleanupWithoutDisableLocked(connection, handle); |
| } |
| |
| status_t SensorService::cleanupWithoutDisableLocked( |
| const sp<SensorEventConnection>& connection, int handle) { |
| SensorRecord* rec = mActiveSensors.valueFor(handle); |
| if (rec) { |
| // see if this connection becomes inactive |
| if (connection->removeSensor(handle)) { |
| BatteryService::disableSensor(connection->getUid(), handle); |
| } |
| if (connection->hasAnySensor() == false) { |
| mActiveConnections.remove(connection); |
| } |
| // see if this sensor becomes inactive |
| if (rec->removeConnection(connection)) { |
| mActiveSensors.removeItem(handle); |
| mActiveVirtualSensors.removeItem(handle); |
| delete rec; |
| } |
| return NO_ERROR; |
| } |
| return BAD_VALUE; |
| } |
| |
| status_t SensorService::setEventRate(const sp<SensorEventConnection>& connection, |
| int handle, nsecs_t ns) |
| { |
| if (mInitCheck != NO_ERROR) |
| return mInitCheck; |
| |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| if (!sensor) |
| return BAD_VALUE; |
| |
| if (!verifyCanAccessSensor(sensor->getSensor(), "Tried configuring")) { |
| return BAD_VALUE; |
| } |
| |
| if (ns < 0) |
| return BAD_VALUE; |
| |
| nsecs_t minDelayNs = sensor->getSensor().getMinDelayNs(); |
| if (ns < minDelayNs) { |
| ns = minDelayNs; |
| } |
| |
| return sensor->setDelay(connection.get(), handle, ns); |
| } |
| |
| status_t SensorService::flushSensor(const sp<SensorEventConnection>& connection, |
| int handle) { |
| if (mInitCheck != NO_ERROR) return mInitCheck; |
| SensorInterface* sensor = mSensorMap.valueFor(handle); |
| if (sensor == NULL) { |
| return BAD_VALUE; |
| } |
| |
| if (!verifyCanAccessSensor(sensor->getSensor(), "Tried flushing")) { |
| return BAD_VALUE; |
| } |
| |
| if (sensor->getSensor().getReportingMode() == AREPORTING_MODE_ONE_SHOT) { |
| ALOGE("flush called on a one-shot sensor"); |
| return INVALID_OPERATION; |
| } |
| |
| status_t ret = sensor->flush(connection.get(), handle); |
| if (ret == NO_ERROR) { |
| SensorRecord* rec = mActiveSensors.valueFor(handle); |
| if (rec != NULL) rec->addPendingFlushConnection(connection); |
| } |
| return ret; |
| } |
| |
| bool SensorService::canAccessSensor(const Sensor& sensor) { |
| return (sensor.getRequiredPermission().isEmpty()) || |
| PermissionCache::checkCallingPermission(String16(sensor.getRequiredPermission())); |
| } |
| |
| bool SensorService::verifyCanAccessSensor(const Sensor& sensor, const char* operation) { |
| if (canAccessSensor(sensor)) { |
| return true; |
| } else { |
| String8 errorMessage; |
| errorMessage.appendFormat( |
| "%s a sensor (%s) without holding its required permission: %s", |
| operation, |
| sensor.getName().string(), |
| sensor.getRequiredPermission().string()); |
| return false; |
| } |
| } |
| |
| void SensorService::checkWakeLockState() { |
| Mutex::Autolock _l(mLock); |
| checkWakeLockStateLocked(); |
| } |
| |
| void SensorService::checkWakeLockStateLocked() { |
| if (!mWakeLockAcquired) { |
| return; |
| } |
| bool releaseLock = true; |
| for (size_t i=0 ; i<mActiveConnections.size() ; i++) { |
| sp<SensorEventConnection> connection(mActiveConnections[i].promote()); |
| if (connection != 0) { |
| if (connection->needsWakeLock()) { |
| releaseLock = false; |
| break; |
| } |
| } |
| } |
| if (releaseLock) { |
| ALOGD_IF(DEBUG_CONNECTIONS, "releasing wakelock %s", WAKE_LOCK_NAME); |
| release_wake_lock(WAKE_LOCK_NAME); |
| mWakeLockAcquired = false; |
| } |
| } |
| |
| // --------------------------------------------------------------------------- |
| SensorService::SensorRecord::SensorRecord( |
| const sp<SensorEventConnection>& connection) |
| { |
| mConnections.add(connection); |
| } |
| |
| bool SensorService::SensorRecord::addConnection( |
| const sp<SensorEventConnection>& connection) |
| { |
| if (mConnections.indexOf(connection) < 0) { |
| mConnections.add(connection); |
| return true; |
| } |
| return false; |
| } |
| |
| bool SensorService::SensorRecord::removeConnection( |
| const wp<SensorEventConnection>& connection) |
| { |
| ssize_t index = mConnections.indexOf(connection); |
| if (index >= 0) { |
| mConnections.removeItemsAt(index, 1); |
| } |
| // Remove this connections from the queue of flush() calls made on this sensor. |
| for (Vector< wp<SensorEventConnection> >::iterator it = |
| mPendingFlushConnections.begin(); it != mPendingFlushConnections.end();) { |
| if (it->unsafe_get() == connection.unsafe_get()) { |
| it = mPendingFlushConnections.erase(it); |
| } else { |
| ++it; |
| } |
| } |
| return mConnections.size() ? false : true; |
| } |
| |
| void SensorService::SensorRecord::addPendingFlushConnection( |
| const sp<SensorEventConnection>& connection) { |
| mPendingFlushConnections.add(connection); |
| } |
| |
| void SensorService::SensorRecord::removeFirstPendingFlushConnection() { |
| if (mPendingFlushConnections.size() > 0) { |
| mPendingFlushConnections.removeAt(0); |
| } |
| } |
| |
| SensorService::SensorEventConnection * |
| SensorService::SensorRecord::getFirstPendingFlushConnection() { |
| if (mPendingFlushConnections.size() > 0) { |
| return mPendingFlushConnections[0].unsafe_get(); |
| } |
| return NULL; |
| } |
| |
| // --------------------------------------------------------------------------- |
| |
| SensorService::SensorEventConnection::SensorEventConnection( |
| const sp<SensorService>& service, uid_t uid) |
| : mService(service), mUid(uid), mWakeLockRefCount(0), mEventCache(NULL), mCacheSize(0), |
| mMaxCacheSize(0) { |
| const SensorDevice& device(SensorDevice::getInstance()); |
| mChannel = new BitTube(mService->mSocketBufferSize); |
| #if DEBUG_CONNECTIONS |
| mEventsReceived = mEventsSentFromCache = mEventsSent = 0; |
| mTotalAcksNeeded = mTotalAcksReceived = 0; |
| #endif |
| } |
| |
| SensorService::SensorEventConnection::~SensorEventConnection() { |
| ALOGD_IF(DEBUG_CONNECTIONS, "~SensorEventConnection(%p)", this); |
| if (mEventCache != NULL) { |
| delete mEventCache; |
| } |
| mService->cleanupConnection(this); |
| } |
| |
| void SensorService::SensorEventConnection::onFirstRef() { |
| LooperCallback::onFirstRef(); |
| } |
| |
| bool SensorService::SensorEventConnection::needsWakeLock() { |
| Mutex::Autolock _l(mConnectionLock); |
| return mWakeLockRefCount > 0; |
| } |
| |
| void SensorService::SensorEventConnection::dump(String8& result) { |
| Mutex::Autolock _l(mConnectionLock); |
| result.appendFormat("\t %d WakeLockRefCount \n", mWakeLockRefCount); |
| for (size_t i = 0; i < mSensorInfo.size(); ++i) { |
| const FlushInfo& flushInfo = mSensorInfo.valueAt(i); |
| result.appendFormat("\t %s 0x%08x | status: %s | pending flush events %d | uid %d|" |
| "cache size: %d max cache size %d\n", |
| mService->getSensorName(mSensorInfo.keyAt(i)).string(), |
| mSensorInfo.keyAt(i), |
| flushInfo.mFirstFlushPending ? "First flush pending" : |
| "active", |
| flushInfo.mPendingFlushEventsToSend, |
| mUid, |
| mCacheSize, |
| mMaxCacheSize); |
| #if DEBUG_CONNECTIONS |
| result.appendFormat("\t events recvd: %d | sent %d | cache %d | dropped %d |" |
| " total_acks_needed %d | total_acks_recvd %d\n", |
| mEventsReceived, |
| mEventsSent, |
| mEventsSentFromCache, |
| mEventsReceived - (mEventsSentFromCache + |
| mEventsSent + mCacheSize), |
| mTotalAcksNeeded, |
| mTotalAcksReceived); |
| #endif |
| |
| } |
| } |
| |
| bool SensorService::SensorEventConnection::addSensor(int32_t handle) { |
| Mutex::Autolock _l(mConnectionLock); |
| if (!verifyCanAccessSensor(mService->getSensorFromHandle(handle), "Tried adding")) { |
| return false; |
| } |
| if (mSensorInfo.indexOfKey(handle) < 0) { |
| mSensorInfo.add(handle, FlushInfo()); |
| return true; |
| } |
| return false; |
| } |
| |
| bool SensorService::SensorEventConnection::removeSensor(int32_t handle) { |
| Mutex::Autolock _l(mConnectionLock); |
| if (mSensorInfo.removeItem(handle) >= 0) { |
| return true; |
| } |
| return false; |
| } |
| |
| bool SensorService::SensorEventConnection::hasSensor(int32_t handle) const { |
| Mutex::Autolock _l(mConnectionLock); |
| return mSensorInfo.indexOfKey(handle) >= 0; |
| } |
| |
| bool SensorService::SensorEventConnection::hasAnySensor() const { |
| Mutex::Autolock _l(mConnectionLock); |
| return mSensorInfo.size() ? true : false; |
| } |
| |
| void SensorService::SensorEventConnection::setFirstFlushPending(int32_t handle, |
| bool value) { |
| Mutex::Autolock _l(mConnectionLock); |
| ssize_t index = mSensorInfo.indexOfKey(handle); |
| if (index >= 0) { |
| FlushInfo& flushInfo = mSensorInfo.editValueAt(index); |
| flushInfo.mFirstFlushPending = value; |
| } |
| } |
| |
| status_t SensorService::SensorEventConnection::sendEvents( |
| sensors_event_t const* buffer, size_t numEvents, |
| sensors_event_t* scratch) { |
| // filter out events not for this connection |
| size_t count = 0; |
| Mutex::Autolock _l(mConnectionLock); |
| if (scratch) { |
| size_t i=0; |
| while (i<numEvents) { |
| int32_t sensor_handle = buffer[i].sensor; |
| if (buffer[i].type == SENSOR_TYPE_META_DATA) { |
| ALOGD_IF(DEBUG_CONNECTIONS, "flush complete event sensor==%d ", |
| buffer[i].meta_data.sensor); |
| // Setting sensor_handle to the correct sensor to ensure the sensor events per connection are |
| // filtered correctly. buffer[i].sensor is zero for meta_data events. |
| sensor_handle = buffer[i].meta_data.sensor; |
| } |
| ssize_t index = mSensorInfo.indexOfKey(sensor_handle); |
| // Check if this connection has registered for this sensor. If not continue to the |
| // next sensor_event. |
| if (index < 0) { |
| ++i; |
| continue; |
| } |
| |
| FlushInfo& flushInfo = mSensorInfo.editValueAt(index); |
| // Check if there is a pending flush_complete event for this sensor on this connection. |
| if (buffer[i].type == SENSOR_TYPE_META_DATA && flushInfo.mFirstFlushPending == true) { |
| SensorService::SensorRecord *rec = mService->getSensorRecord(sensor_handle); |
| if (rec && rec->getFirstPendingFlushConnection() == this) { |
| rec->removeFirstPendingFlushConnection(); |
| flushInfo.mFirstFlushPending = false; |
| ++i; |
| ALOGD_IF(DEBUG_CONNECTIONS, "First flush event for sensor==%d ", |
| buffer[i].meta_data.sensor); |
| continue; |
| } |
| } |
| |
| // If there is a pending flush complete event for this sensor on this connection, |
| // ignore the event and proceed to the next. |
| if (flushInfo.mFirstFlushPending) { |
| ++i; |
| continue; |
| } |
| |
| do { |
| if (buffer[i].type == SENSOR_TYPE_META_DATA) { |
| // Check if this connection has called flush() on this sensor. Only if |
| // a flush() has been explicitly called, send a flush_complete_event. |
| SensorService::SensorRecord *rec = mService->getSensorRecord(sensor_handle); |
| if (rec && rec->getFirstPendingFlushConnection() == this) { |
| rec->removeFirstPendingFlushConnection(); |
| scratch[count++] = buffer[i]; |
| } |
| ++i; |
| } else { |
| // Regular sensor event, just copy it to the scratch buffer. |
| scratch[count++] = buffer[i++]; |
| } |
| } while ((i<numEvents) && ((buffer[i].sensor == sensor_handle) || |
| (buffer[i].type == SENSOR_TYPE_META_DATA && |
| buffer[i].meta_data.sensor == sensor_handle))); |
| } |
| } else { |
| scratch = const_cast<sensors_event_t *>(buffer); |
| count = numEvents; |
| } |
| |
| sendPendingFlushEventsLocked(); |
| // Early return if there are no events for this connection. |
| if (count == 0) { |
| return status_t(NO_ERROR); |
| } |
| |
| #if DEBUG_CONNECTIONS |
| mEventsReceived += count; |
| #endif |
| if (mCacheSize != 0) { |
| // There are some events in the cache which need to be sent first. Copy this buffer to |
| // the end of cache. |
| if (mCacheSize + count <= mMaxCacheSize) { |
| memcpy(&mEventCache[mCacheSize], scratch, count * sizeof(sensors_event_t)); |
| mCacheSize += count; |
| } else { |
| // Check if any new sensors have registered on this connection which may have increased |
| // the max cache size that is desired. |
| if (mCacheSize + count < computeMaxCacheSizeLocked()) { |
| reAllocateCacheLocked(scratch, count); |
| return status_t(NO_ERROR); |
| } |
| // Some events need to be dropped. |
| int remaningCacheSize = mMaxCacheSize - mCacheSize; |
| if (remaningCacheSize != 0) { |
| memcpy(&mEventCache[mCacheSize], scratch, |
| remaningCacheSize * sizeof(sensors_event_t)); |
| } |
| int numEventsDropped = count - remaningCacheSize; |
| countFlushCompleteEventsLocked(mEventCache, numEventsDropped); |
| // Drop the first "numEventsDropped" in the cache. |
| memmove(mEventCache, &mEventCache[numEventsDropped], |
| (mCacheSize - numEventsDropped) * sizeof(sensors_event_t)); |
| |
| // Copy the remainingEvents in scratch buffer to the end of cache. |
| memcpy(&mEventCache[mCacheSize - numEventsDropped], scratch + remaningCacheSize, |
| numEventsDropped * sizeof(sensors_event_t)); |
| } |
| return status_t(NO_ERROR); |
| } |
| |
| int index_wake_up_event = findWakeUpSensorEventLocked(scratch, count); |
| if (index_wake_up_event >= 0) { |
| scratch[index_wake_up_event].flags |= WAKE_UP_SENSOR_EVENT_NEEDS_ACK; |
| ++mWakeLockRefCount; |
| #if DEBUG_CONNECTIONS |
| ++mTotalAcksNeeded; |
| #endif |
| } |
| |
| // NOTE: ASensorEvent and sensors_event_t are the same type. |
| ssize_t size = SensorEventQueue::write(mChannel, |
| reinterpret_cast<ASensorEvent const*>(scratch), count); |
| if (size < 0) { |
| // Write error, copy events to local cache. |
| if (index_wake_up_event >= 0) { |
| // If there was a wake_up sensor_event, reset the flag. |
| scratch[index_wake_up_event].flags &= ~WAKE_UP_SENSOR_EVENT_NEEDS_ACK; |
| --mWakeLockRefCount; |
| #if DEBUG_CONNECTIONS |
| --mTotalAcksNeeded; |
| #endif |
| } |
| if (mEventCache == NULL) { |
| mMaxCacheSize = computeMaxCacheSizeLocked(); |
| mEventCache = new sensors_event_t[mMaxCacheSize]; |
| mCacheSize = 0; |
| } |
| memcpy(&mEventCache[mCacheSize], scratch, count * sizeof(sensors_event_t)); |
| mCacheSize += count; |
| |
| // Add this file descriptor to the looper to get a callback when this fd is available for |
| // writing. |
| mService->getLooper()->addFd(mChannel->getSendFd(), 0, |
| ALOOPER_EVENT_OUTPUT | ALOOPER_EVENT_INPUT, this, NULL); |
| return size; |
| } |
| |
| #if DEBUG_CONNECTIONS |
| if (size > 0) { |
| mEventsSent += count; |
| } |
| #endif |
| |
| return size < 0 ? status_t(size) : status_t(NO_ERROR); |
| } |
| |
| void SensorService::SensorEventConnection::reAllocateCacheLocked(sensors_event_t const* scratch, |
| int count) { |
| sensors_event_t *eventCache_new; |
| const int new_cache_size = computeMaxCacheSizeLocked(); |
| // Allocate new cache, copy over events from the old cache & scratch, free up memory. |
| eventCache_new = new sensors_event_t[new_cache_size]; |
| memcpy(eventCache_new, mEventCache, mCacheSize * sizeof(sensors_event_t)); |
| memcpy(&eventCache_new[mCacheSize], scratch, count * sizeof(sensors_event_t)); |
| |
| ALOGD_IF(DEBUG_CONNECTIONS, "reAllocateCacheLocked maxCacheSize=%d %d", mMaxCacheSize, |
| new_cache_size); |
| |
| delete mEventCache; |
| mEventCache = eventCache_new; |
| mCacheSize += count; |
| mMaxCacheSize = new_cache_size; |
| } |
| |
| void SensorService::SensorEventConnection::sendPendingFlushEventsLocked() { |
| ASensorEvent flushCompleteEvent; |
| flushCompleteEvent.type = SENSOR_TYPE_META_DATA; |
| flushCompleteEvent.sensor = 0; |
| // Loop through all the sensors for this connection and check if there are any pending |
| // flush complete events to be sent. |
| for (size_t i = 0; i < mSensorInfo.size(); ++i) { |
| FlushInfo& flushInfo = mSensorInfo.editValueAt(i); |
| while (flushInfo.mPendingFlushEventsToSend > 0) { |
| flushCompleteEvent.meta_data.sensor = mSensorInfo.keyAt(i); |
| ssize_t size = SensorEventQueue::write(mChannel, &flushCompleteEvent, 1); |
| if (size < 0) { |
| return; |
| } |
| ALOGD_IF(DEBUG_CONNECTIONS, "sent dropped flush complete event==%d ", |
| flushCompleteEvent.meta_data.sensor); |
| flushInfo.mPendingFlushEventsToSend--; |
| } |
| } |
| } |
| |
| void SensorService::SensorEventConnection::writeToSocketFromCacheLocked() { |
| // At a time write at most half the size of the receiver buffer in SensorEventQueue OR |
| // half the size of the socket buffer allocated in BitTube whichever is smaller. |
| const int maxWriteSize = helpers::min(SensorEventQueue::MAX_RECEIVE_BUFFER_EVENT_COUNT/2, |
| int(mService->mSocketBufferSize/(sizeof(sensors_event_t)*2))); |
| // Send pending flush complete events (if any) |
| sendPendingFlushEventsLocked(); |
| for (int numEventsSent = 0; numEventsSent < mCacheSize;) { |
| const int numEventsToWrite = helpers::min(mCacheSize - numEventsSent, maxWriteSize); |
| int index_wake_up_event = |
| findWakeUpSensorEventLocked(mEventCache + numEventsSent, numEventsToWrite); |
| if (index_wake_up_event >= 0) { |
| mEventCache[index_wake_up_event + numEventsSent].flags |= |
| WAKE_UP_SENSOR_EVENT_NEEDS_ACK; |
| ++mWakeLockRefCount; |
| #if DEBUG_CONNECTIONS |
| ++mTotalAcksNeeded; |
| #endif |
| } |
| |
| ssize_t size = SensorEventQueue::write(mChannel, |
| reinterpret_cast<ASensorEvent const*>(mEventCache + numEventsSent), |
| numEventsToWrite); |
| if (size < 0) { |
| if (index_wake_up_event >= 0) { |
| // If there was a wake_up sensor_event, reset the flag. |
| mEventCache[index_wake_up_event + numEventsSent].flags &= |
| ~WAKE_UP_SENSOR_EVENT_NEEDS_ACK; |
| --mWakeLockRefCount; |
| #if DEBUG_CONNECTIONS |
| --mTotalAcksNeeded; |
| #endif |
| } |
| memmove(mEventCache, &mEventCache[numEventsSent], |
| (mCacheSize - numEventsSent) * sizeof(sensors_event_t)); |
| ALOGD_IF(DEBUG_CONNECTIONS, "wrote %d events from cache size==%d ", |
| numEventsSent, mCacheSize); |
| mCacheSize -= numEventsSent; |
| return; |
| } |
| numEventsSent += numEventsToWrite; |
| #if DEBUG_CONNECTIONS |
| mEventsSentFromCache += numEventsToWrite; |
| #endif |
| } |
| ALOGD_IF(DEBUG_CONNECTIONS, "wrote all events from cache size=%d ", mCacheSize); |
| // All events from the cache have been sent. Reset cache size to zero. |
| mCacheSize = 0; |
| // Poll only for ALOOPER_EVENT_INPUT(read) on the file descriptor. |
| mService->getLooper()->addFd(mChannel->getSendFd(), 0, ALOOPER_EVENT_INPUT, this, NULL); |
| } |
| |
| void SensorService::SensorEventConnection::countFlushCompleteEventsLocked( |
| sensors_event_t* scratch, const int numEventsDropped) { |
| ALOGD_IF(DEBUG_CONNECTIONS, "dropping %d events ", numEventsDropped); |
| // Count flushComplete events in the events that are about to the dropped. These will be sent |
| // separately before the next batch of events. |
| for (int j = 0; j < numEventsDropped; ++j) { |
| if (scratch[j].type == SENSOR_TYPE_META_DATA) { |
| FlushInfo& flushInfo = mSensorInfo.editValueFor(scratch[j].meta_data.sensor); |
| flushInfo.mPendingFlushEventsToSend++; |
| ALOGD_IF(DEBUG_CONNECTIONS, "increment pendingFlushCount %d", |
| flushInfo.mPendingFlushEventsToSend); |
| } |
| } |
| return; |
| } |
| |
| int SensorService::SensorEventConnection::findWakeUpSensorEventLocked( |
| sensors_event_t const* scratch, const int count) { |
| for (int i = 0; i < count; ++i) { |
| if (mService->isWakeUpSensorEvent(scratch[i])) { |
| return i; |
| } |
| } |
| return -1; |
| } |
| |
| sp<BitTube> SensorService::SensorEventConnection::getSensorChannel() const |
| { |
| return mChannel; |
| } |
| |
| status_t SensorService::SensorEventConnection::enableDisable( |
| int handle, bool enabled, nsecs_t samplingPeriodNs, nsecs_t maxBatchReportLatencyNs, |
| int reservedFlags) |
| { |
| status_t err; |
| if (enabled) { |
| err = mService->enable(this, handle, samplingPeriodNs, maxBatchReportLatencyNs, |
| reservedFlags); |
| |
| } else { |
| err = mService->disable(this, handle); |
| } |
| return err; |
| } |
| |
| status_t SensorService::SensorEventConnection::setEventRate( |
| int handle, nsecs_t samplingPeriodNs) |
| { |
| return mService->setEventRate(this, handle, samplingPeriodNs); |
| } |
| |
| status_t SensorService::SensorEventConnection::flush() { |
| SensorDevice& dev(SensorDevice::getInstance()); |
| const int halVersion = dev.getHalDeviceVersion(); |
| Mutex::Autolock _l(mConnectionLock); |
| status_t err(NO_ERROR); |
| // Loop through all sensors for this connection and call flush on each of them. |
| for (size_t i = 0; i < mSensorInfo.size(); ++i) { |
| const int handle = mSensorInfo.keyAt(i); |
| FlushInfo& flushInfo = mSensorInfo.editValueFor(handle); |
| if (halVersion < SENSORS_DEVICE_API_VERSION_1_1 || mService->isVirtualSensor(handle)) { |
| // For older devices just increment pending flush count which will send a trivial |
| // flush complete event. |
| flushInfo.mPendingFlushEventsToSend++; |
| } else { |
| status_t err_flush = mService->flushSensor(this, handle); |
| if (err_flush != NO_ERROR) { |
| ALOGE("Flush error handle=%d %s", handle, strerror(-err_flush)); |
| } |
| err = (err_flush != NO_ERROR) ? err_flush : err; |
| } |
| } |
| return err; |
| } |
| |
| int SensorService::SensorEventConnection::handleEvent(int fd, int events, void* data) { |
| if (events & ALOOPER_EVENT_HANGUP || events & ALOOPER_EVENT_ERROR) { |
| return 0; |
| } |
| |
| if (events & ALOOPER_EVENT_INPUT) { |
| char buf; |
| ssize_t ret = ::recv(fd, &buf, sizeof(buf), MSG_DONTWAIT); |
| |
| { |
| Mutex::Autolock _l(mConnectionLock); |
| --mWakeLockRefCount; |
| #if DEBUG_CONNECTIONS |
| ++mTotalAcksReceived; |
| #endif |
| } |
| // Check if wakelock can be released by sensorservice. mConnectionLock needs to be released |
| // here as checkWakeLockState() will need it. |
| if (mWakeLockRefCount == 0) { |
| mService->checkWakeLockState(); |
| } |
| // continue getting callbacks. |
| return 1; |
| } |
| |
| if (events & ALOOPER_EVENT_OUTPUT) { |
| // send sensor data that is stored in mEventCache. |
| Mutex::Autolock _l(mConnectionLock); |
| writeToSocketFromCacheLocked(); |
| } |
| return 1; |
| } |
| |
| int SensorService::SensorEventConnection::computeMaxCacheSizeLocked() const { |
| int fifoWakeUpSensors = 0; |
| int fifoNonWakeUpSensors = 0; |
| for (size_t i = 0; i < mSensorInfo.size(); ++i) { |
| const Sensor& sensor = mService->getSensorFromHandle(mSensorInfo.keyAt(i)); |
| if (sensor.getFifoReservedEventCount() == sensor.getFifoMaxEventCount()) { |
| // Each sensor has a reserved fifo. Sum up the fifo sizes for all wake up sensors and |
| // non wake_up sensors. |
| if (sensor.isWakeUpSensor()) { |
| fifoWakeUpSensors += sensor.getFifoReservedEventCount(); |
| } else { |
| fifoNonWakeUpSensors += sensor.getFifoReservedEventCount(); |
| } |
| } else { |
| // Shared fifo. Compute the max of the fifo sizes for wake_up and non_wake up sensors. |
| if (sensor.isWakeUpSensor()) { |
| fifoWakeUpSensors = fifoWakeUpSensors > sensor.getFifoMaxEventCount() ? |
| fifoWakeUpSensors : sensor.getFifoMaxEventCount(); |
| |
| } else { |
| fifoNonWakeUpSensors = fifoNonWakeUpSensors > sensor.getFifoMaxEventCount() ? |
| fifoNonWakeUpSensors : sensor.getFifoMaxEventCount(); |
| |
| } |
| } |
| } |
| if (fifoWakeUpSensors + fifoNonWakeUpSensors == 0) { |
| // It is extremely unlikely that there is a write failure in non batch mode. Return a cache |
| // size that is equal to that of the batch mode. |
| // ALOGW("Write failure in non-batch mode"); |
| return MAX_SOCKET_BUFFER_SIZE_BATCHED/sizeof(sensors_event_t); |
| } |
| return fifoWakeUpSensors + fifoNonWakeUpSensors; |
| } |
| |
| // --------------------------------------------------------------------------- |
| }; // namespace android |
| |