services/inputflinger/reader/mapper/MultiTouchInputMapper.cpp - android_frameworks_native - Gitiles

 /*
  * Copyright (C) 2019 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "../Macros.h"

 #include "MultiTouchInputMapper.h"

 #include <android/sysprop/InputProperties.sysprop.h>

 namespace android {

 // --- Constants ---

 // Maximum number of slots supported when using the slot-based Multitouch Protocol B.
 static constexpr size_t MAX_SLOTS = 32;

 // --- MultiTouchMotionAccumulator ---

 MultiTouchMotionAccumulator::MultiTouchMotionAccumulator()
       : mCurrentSlot(-1),
         mSlots(nullptr),
         mSlotCount(0),
         mUsingSlotsProtocol(false),
         mHaveStylus(false) {}

 MultiTouchMotionAccumulator::~MultiTouchMotionAccumulator() {
     delete[] mSlots;
 }

 void MultiTouchMotionAccumulator::configure(InputDeviceContext& deviceContext, size_t slotCount,
                                             bool usingSlotsProtocol) {
     mSlotCount = slotCount;
     mUsingSlotsProtocol = usingSlotsProtocol;
     mHaveStylus = deviceContext.hasAbsoluteAxis(ABS_MT_TOOL_TYPE);

     delete[] mSlots;
     mSlots = new Slot[slotCount];
 }

 void MultiTouchMotionAccumulator::reset(InputDeviceContext& deviceContext) {
     // Unfortunately there is no way to read the initial contents of the slots.
     // So when we reset the accumulator, we must assume they are all zeroes.
     if (mUsingSlotsProtocol) {
         // Query the driver for the current slot index and use it as the initial slot
         // before we start reading events from the device.  It is possible that the
         // current slot index will not be the same as it was when the first event was
         // written into the evdev buffer, which means the input mapper could start
         // out of sync with the initial state of the events in the evdev buffer.
         // In the extremely unlikely case that this happens, the data from
         // two slots will be confused until the next ABS_MT_SLOT event is received.
         // This can cause the touch point to "jump", but at least there will be
         // no stuck touches.
         int32_t initialSlot;
         status_t status = deviceContext.getAbsoluteAxisValue(ABS_MT_SLOT, &initialSlot);
         if (status) {
             ALOGD("Could not retrieve current multitouch slot index.  status=%d", status);
             initialSlot = -1;
         }
         clearSlots(initialSlot);
     } else {
         clearSlots(-1);
     }
 }

 void MultiTouchMotionAccumulator::clearSlots(int32_t initialSlot) {
     if (mSlots) {
         for (size_t i = 0; i < mSlotCount; i++) {
             mSlots[i].clear();
         }
     }
     mCurrentSlot = initialSlot;
 }

 void MultiTouchMotionAccumulator::process(const RawEvent* rawEvent) {
     if (rawEvent->type == EV_ABS) {
         bool newSlot = false;
         if (mUsingSlotsProtocol) {
             if (rawEvent->code == ABS_MT_SLOT) {
                 mCurrentSlot = rawEvent->value;
                 newSlot = true;
             }
         } else if (mCurrentSlot < 0) {
             mCurrentSlot = 0;
         }

         if (mCurrentSlot < 0 || size_t(mCurrentSlot) >= mSlotCount) {
             if (DEBUG_POINTERS) {
                 if (newSlot) {
                     ALOGW("MultiTouch device emitted invalid slot index %d but it "
                           "should be between 0 and %zd; ignoring this slot.",
                           mCurrentSlot, mSlotCount - 1);
                 }
             }
         } else {
             Slot* slot = &mSlots[mCurrentSlot];
             // If mUsingSlotsProtocol is true, it means the raw pointer has axis info of
             // ABS_MT_TRACKING_ID and ABS_MT_SLOT, so driver should send a valid trackingId while
             // updating the slot.
             if (!mUsingSlotsProtocol) {
                 slot->mInUse = true;
             }

             switch (rawEvent->code) {
                 case ABS_MT_POSITION_X:
                     slot->mAbsMTPositionX = rawEvent->value;
                     warnIfNotInUse(*rawEvent, *slot);
                     break;
                 case ABS_MT_POSITION_Y:
                     slot->mAbsMTPositionY = rawEvent->value;
                     warnIfNotInUse(*rawEvent, *slot);
                     break;
                 case ABS_MT_TOUCH_MAJOR:
                     slot->mAbsMTTouchMajor = rawEvent->value;
                     break;
                 case ABS_MT_TOUCH_MINOR:
                     slot->mAbsMTTouchMinor = rawEvent->value;
                     slot->mHaveAbsMTTouchMinor = true;
                     break;
                 case ABS_MT_WIDTH_MAJOR:
                     slot->mAbsMTWidthMajor = rawEvent->value;
                     break;
                 case ABS_MT_WIDTH_MINOR:
                     slot->mAbsMTWidthMinor = rawEvent->value;
                     slot->mHaveAbsMTWidthMinor = true;
                     break;
                 case ABS_MT_ORIENTATION:
                     slot->mAbsMTOrientation = rawEvent->value;
                     break;
                 case ABS_MT_TRACKING_ID:
                     if (mUsingSlotsProtocol && rawEvent->value < 0) {
                         // The slot is no longer in use but it retains its previous contents,
                         // which may be reused for subsequent touches.
                         slot->mInUse = false;
                     } else {
                         slot->mInUse = true;
                         slot->mAbsMTTrackingId = rawEvent->value;
                     }
                     break;
                 case ABS_MT_PRESSURE:
                     slot->mAbsMTPressure = rawEvent->value;
                     break;
                 case ABS_MT_DISTANCE:
                     slot->mAbsMTDistance = rawEvent->value;
                     break;
                 case ABS_MT_TOOL_TYPE:
                     slot->mAbsMTToolType = rawEvent->value;
                     slot->mHaveAbsMTToolType = true;
                     break;
             }
         }
     } else if (rawEvent->type == EV_SYN && rawEvent->code == SYN_MT_REPORT) {
         // MultiTouch Sync: The driver has returned all data for *one* of the pointers.
         mCurrentSlot += 1;
     }
 }

 void MultiTouchMotionAccumulator::finishSync() {
     if (!mUsingSlotsProtocol) {
         clearSlots(-1);
     }
 }

 bool MultiTouchMotionAccumulator::hasStylus() const {
     return mHaveStylus;
 }

 void MultiTouchMotionAccumulator::warnIfNotInUse(const RawEvent& event, const Slot& slot) {
     if (!slot.mInUse) {
         ALOGW("Received unexpected event (0x%0x, 0x%0x) for slot %i with tracking id %i",
               event.code, event.value, mCurrentSlot, slot.mAbsMTTrackingId);
     }
 }

 // --- MultiTouchMotionAccumulator::Slot ---

 MultiTouchMotionAccumulator::Slot::Slot() {
     clear();
 }

 void MultiTouchMotionAccumulator::Slot::clear() {
     mInUse = false;
     mHaveAbsMTTouchMinor = false;
     mHaveAbsMTWidthMinor = false;
     mHaveAbsMTToolType = false;
     mAbsMTPositionX = 0;
     mAbsMTPositionY = 0;
     mAbsMTTouchMajor = 0;
     mAbsMTTouchMinor = 0;
     mAbsMTWidthMajor = 0;
     mAbsMTWidthMinor = 0;
     mAbsMTOrientation = 0;
     mAbsMTTrackingId = -1;
     mAbsMTPressure = 0;
     mAbsMTDistance = 0;
     mAbsMTToolType = 0;
 }

 int32_t MultiTouchMotionAccumulator::Slot::getToolType() const {
     if (mHaveAbsMTToolType) {
         switch (mAbsMTToolType) {
             case MT_TOOL_FINGER:
                 return AMOTION_EVENT_TOOL_TYPE_FINGER;
             case MT_TOOL_PEN:
                 return AMOTION_EVENT_TOOL_TYPE_STYLUS;
             case MT_TOOL_PALM:
                 return AMOTION_EVENT_TOOL_TYPE_PALM;
         }
     }
     return AMOTION_EVENT_TOOL_TYPE_UNKNOWN;
 }

 // --- MultiTouchInputMapper ---

 MultiTouchInputMapper::MultiTouchInputMapper(InputDeviceContext& deviceContext)
       : TouchInputMapper(deviceContext) {}

 MultiTouchInputMapper::~MultiTouchInputMapper() {}

 void MultiTouchInputMapper::reset(nsecs_t when) {
     mMultiTouchMotionAccumulator.reset(getDeviceContext());

     mPointerIdBits.clear();

     TouchInputMapper::reset(when);
 }

 void MultiTouchInputMapper::process(const RawEvent* rawEvent) {
     TouchInputMapper::process(rawEvent);

     mMultiTouchMotionAccumulator.process(rawEvent);
 }

 std::optional<int32_t> MultiTouchInputMapper::getActiveBitId(
         const MultiTouchMotionAccumulator::Slot& inSlot) {
     if (mHavePointerIds) {
         int32_t trackingId = inSlot.getTrackingId();
         for (BitSet32 idBits(mPointerIdBits); !idBits.isEmpty();) {
             int32_t n = idBits.clearFirstMarkedBit();
             if (mPointerTrackingIdMap[n] == trackingId) {
                 return std::make_optional(n);
             }
         }
     }
     return std::nullopt;
 }

 void MultiTouchInputMapper::syncTouch(nsecs_t when, RawState* outState) {
     size_t inCount = mMultiTouchMotionAccumulator.getSlotCount();
     size_t outCount = 0;
     BitSet32 newPointerIdBits;
     mHavePointerIds = true;

     for (size_t inIndex = 0; inIndex < inCount; inIndex++) {
         const MultiTouchMotionAccumulator::Slot* inSlot =
                 mMultiTouchMotionAccumulator.getSlot(inIndex);
         if (!inSlot->isInUse()) {
             continue;
         }

         if (inSlot->getToolType() == AMOTION_EVENT_TOOL_TYPE_PALM) {
             std::optional<int32_t> id = getActiveBitId(*inSlot);
             if (id) {
                 outState->rawPointerData.canceledIdBits.markBit(id.value());
             }
             if (DEBUG_POINTERS) {
                 ALOGI("Stop processing slot %zu for it received a palm event from device %s",
                       inIndex, getDeviceName().c_str());
             }
             continue;
         }

         if (outCount >= MAX_POINTERS) {
             if (DEBUG_POINTERS) {
                 ALOGD("MultiTouch device %s emitted more than maximum of %zu pointers; "
                       "ignoring the rest.",
                       getDeviceName().c_str(), MAX_POINTERS);
             }
             break; // too many fingers!
         }

         RawPointerData::Pointer& outPointer = outState->rawPointerData.pointers[outCount];
         outPointer.x = inSlot->getX();
         outPointer.y = inSlot->getY();
         outPointer.pressure = inSlot->getPressure();
         outPointer.touchMajor = inSlot->getTouchMajor();
         outPointer.touchMinor = inSlot->getTouchMinor();
         outPointer.toolMajor = inSlot->getToolMajor();
         outPointer.toolMinor = inSlot->getToolMinor();
         outPointer.orientation = inSlot->getOrientation();
         outPointer.distance = inSlot->getDistance();
         outPointer.tiltX = 0;
         outPointer.tiltY = 0;

         outPointer.toolType = inSlot->getToolType();
         if (outPointer.toolType == AMOTION_EVENT_TOOL_TYPE_UNKNOWN) {
             outPointer.toolType = mTouchButtonAccumulator.getToolType();
             if (outPointer.toolType == AMOTION_EVENT_TOOL_TYPE_UNKNOWN) {
                 outPointer.toolType = AMOTION_EVENT_TOOL_TYPE_FINGER;
             }
         }
         if (shouldSimulateStylusWithTouch() &&
             outPointer.toolType == AMOTION_EVENT_TOOL_TYPE_FINGER) {
             outPointer.toolType = AMOTION_EVENT_TOOL_TYPE_STYLUS;
         }

         bool isHovering = mTouchButtonAccumulator.getToolType() != AMOTION_EVENT_TOOL_TYPE_MOUSE &&
                 (mTouchButtonAccumulator.isHovering() ||
                  (mRawPointerAxes.pressure.valid && inSlot->getPressure() <= 0));
         outPointer.isHovering = isHovering;

         // Assign pointer id using tracking id if available.
         if (mHavePointerIds) {
             int32_t trackingId = inSlot->getTrackingId();
             int32_t id = -1;
             if (trackingId >= 0) {
                 for (BitSet32 idBits(mPointerIdBits); !idBits.isEmpty();) {
                     uint32_t n = idBits.clearFirstMarkedBit();
                     if (mPointerTrackingIdMap[n] == trackingId) {
                         id = n;
                     }
                 }

                 if (id < 0 && !mPointerIdBits.isFull()) {
                     id = mPointerIdBits.markFirstUnmarkedBit();
                     mPointerTrackingIdMap[id] = trackingId;
                 }
             }
             if (id < 0) {
                 mHavePointerIds = false;
                 outState->rawPointerData.clearIdBits();
                 newPointerIdBits.clear();
             } else {
                 outPointer.id = id;
                 outState->rawPointerData.idToIndex[id] = outCount;
                 outState->rawPointerData.markIdBit(id, isHovering);
                 newPointerIdBits.markBit(id);
             }
         }
         outCount += 1;
     }

     outState->rawPointerData.pointerCount = outCount;
     mPointerIdBits = newPointerIdBits;

     mMultiTouchMotionAccumulator.finishSync();
 }

 void MultiTouchInputMapper::configureRawPointerAxes() {
     TouchInputMapper::configureRawPointerAxes();

     getAbsoluteAxisInfo(ABS_MT_POSITION_X, &mRawPointerAxes.x);
     getAbsoluteAxisInfo(ABS_MT_POSITION_Y, &mRawPointerAxes.y);
     getAbsoluteAxisInfo(ABS_MT_TOUCH_MAJOR, &mRawPointerAxes.touchMajor);
     getAbsoluteAxisInfo(ABS_MT_TOUCH_MINOR, &mRawPointerAxes.touchMinor);
     getAbsoluteAxisInfo(ABS_MT_WIDTH_MAJOR, &mRawPointerAxes.toolMajor);
     getAbsoluteAxisInfo(ABS_MT_WIDTH_MINOR, &mRawPointerAxes.toolMinor);
     getAbsoluteAxisInfo(ABS_MT_ORIENTATION, &mRawPointerAxes.orientation);
     getAbsoluteAxisInfo(ABS_MT_PRESSURE, &mRawPointerAxes.pressure);
     getAbsoluteAxisInfo(ABS_MT_DISTANCE, &mRawPointerAxes.distance);
     getAbsoluteAxisInfo(ABS_MT_TRACKING_ID, &mRawPointerAxes.trackingId);
     getAbsoluteAxisInfo(ABS_MT_SLOT, &mRawPointerAxes.slot);

     if (mRawPointerAxes.trackingId.valid && mRawPointerAxes.slot.valid &&
         mRawPointerAxes.slot.minValue == 0 && mRawPointerAxes.slot.maxValue > 0) {
         size_t slotCount = mRawPointerAxes.slot.maxValue + 1;
         if (slotCount > MAX_SLOTS) {
             ALOGW("MultiTouch Device %s reported %zu slots but the framework "
                   "only supports a maximum of %zu slots at this time.",
                   getDeviceName().c_str(), slotCount, MAX_SLOTS);
             slotCount = MAX_SLOTS;
         }
         mMultiTouchMotionAccumulator.configure(getDeviceContext(), slotCount,
                                                true /*usingSlotsProtocol*/);
     } else {
         mMultiTouchMotionAccumulator.configure(getDeviceContext(), MAX_POINTERS,
                                                false /*usingSlotsProtocol*/);
     }
 }

 bool MultiTouchInputMapper::hasStylus() const {
     return mMultiTouchMotionAccumulator.hasStylus() || mTouchButtonAccumulator.hasStylus() ||
             shouldSimulateStylusWithTouch();
 }

 bool MultiTouchInputMapper::shouldSimulateStylusWithTouch() const {
     static const bool SIMULATE_STYLUS_WITH_TOUCH =
             sysprop::InputProperties::simulate_stylus_with_touch().value_or(false);
     return SIMULATE_STYLUS_WITH_TOUCH &&
             mParameters.deviceType == Parameters::DeviceType::TOUCH_SCREEN;
 }

 } // namespace android
	/*
	* Copyright (C) 2019 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "../Macros.h"

	#include "MultiTouchInputMapper.h"

	#include <android/sysprop/InputProperties.sysprop.h>

	namespace android {

	// --- Constants ---

	// Maximum number of slots supported when using the slot-based Multitouch Protocol B.
	static constexpr size_t MAX_SLOTS = 32;

	// --- MultiTouchMotionAccumulator ---

	MultiTouchMotionAccumulator::MultiTouchMotionAccumulator()
	: mCurrentSlot(-1),
	mSlots(nullptr),
	mSlotCount(0),
	mUsingSlotsProtocol(false),
	mHaveStylus(false) {}

	MultiTouchMotionAccumulator::~MultiTouchMotionAccumulator() {
	delete[] mSlots;
	}

	void MultiTouchMotionAccumulator::configure(InputDeviceContext& deviceContext, size_t slotCount,
	bool usingSlotsProtocol) {
	mSlotCount = slotCount;
	mUsingSlotsProtocol = usingSlotsProtocol;
	mHaveStylus = deviceContext.hasAbsoluteAxis(ABS_MT_TOOL_TYPE);

	delete[] mSlots;
	mSlots = new Slot[slotCount];
	}

	void MultiTouchMotionAccumulator::reset(InputDeviceContext& deviceContext) {
	// Unfortunately there is no way to read the initial contents of the slots.
	// So when we reset the accumulator, we must assume they are all zeroes.
	if (mUsingSlotsProtocol) {
	// Query the driver for the current slot index and use it as the initial slot
	// before we start reading events from the device. It is possible that the
	// current slot index will not be the same as it was when the first event was
	// written into the evdev buffer, which means the input mapper could start
	// out of sync with the initial state of the events in the evdev buffer.
	// In the extremely unlikely case that this happens, the data from
	// two slots will be confused until the next ABS_MT_SLOT event is received.
	// This can cause the touch point to "jump", but at least there will be
	// no stuck touches.
	int32_t initialSlot;
	status_t status = deviceContext.getAbsoluteAxisValue(ABS_MT_SLOT, &initialSlot);
	if (status) {
	ALOGD("Could not retrieve current multitouch slot index. status=%d", status);
	initialSlot = -1;
	}
	clearSlots(initialSlot);
	} else {
	clearSlots(-1);
	}
	}

	void MultiTouchMotionAccumulator::clearSlots(int32_t initialSlot) {
	if (mSlots) {
	for (size_t i = 0; i < mSlotCount; i++) {
	mSlots[i].clear();
	}
	}
	mCurrentSlot = initialSlot;
	}

	void MultiTouchMotionAccumulator::process(const RawEvent* rawEvent) {
	if (rawEvent->type == EV_ABS) {
	bool newSlot = false;
	if (mUsingSlotsProtocol) {
	if (rawEvent->code == ABS_MT_SLOT) {
	mCurrentSlot = rawEvent->value;
	newSlot = true;
	}
	} else if (mCurrentSlot < 0) {
	mCurrentSlot = 0;
	}

	if (mCurrentSlot < 0 \|\| size_t(mCurrentSlot) >= mSlotCount) {
	if (DEBUG_POINTERS) {
	if (newSlot) {
	ALOGW("MultiTouch device emitted invalid slot index %d but it "
	"should be between 0 and %zd; ignoring this slot.",
	mCurrentSlot, mSlotCount - 1);
	}
	}
	} else {
	Slot* slot = &mSlots[mCurrentSlot];
	// If mUsingSlotsProtocol is true, it means the raw pointer has axis info of
	// ABS_MT_TRACKING_ID and ABS_MT_SLOT, so driver should send a valid trackingId while
	// updating the slot.
	if (!mUsingSlotsProtocol) {
	slot->mInUse = true;
	}

	switch (rawEvent->code) {
	case ABS_MT_POSITION_X:
	slot->mAbsMTPositionX = rawEvent->value;
	warnIfNotInUse(rawEvent, slot);
	break;
	case ABS_MT_POSITION_Y:
	slot->mAbsMTPositionY = rawEvent->value;
	warnIfNotInUse(rawEvent, slot);
	break;
	case ABS_MT_TOUCH_MAJOR:
	slot->mAbsMTTouchMajor = rawEvent->value;
	break;
	case ABS_MT_TOUCH_MINOR:
	slot->mAbsMTTouchMinor = rawEvent->value;
	slot->mHaveAbsMTTouchMinor = true;
	break;
	case ABS_MT_WIDTH_MAJOR:
	slot->mAbsMTWidthMajor = rawEvent->value;
	break;
	case ABS_MT_WIDTH_MINOR:
	slot->mAbsMTWidthMinor = rawEvent->value;
	slot->mHaveAbsMTWidthMinor = true;
	break;
	case ABS_MT_ORIENTATION:
	slot->mAbsMTOrientation = rawEvent->value;
	break;
	case ABS_MT_TRACKING_ID:
	if (mUsingSlotsProtocol && rawEvent->value < 0) {
	// The slot is no longer in use but it retains its previous contents,
	// which may be reused for subsequent touches.
	slot->mInUse = false;
	} else {
	slot->mInUse = true;
	slot->mAbsMTTrackingId = rawEvent->value;
	}
	break;
	case ABS_MT_PRESSURE:
	slot->mAbsMTPressure = rawEvent->value;
	break;
	case ABS_MT_DISTANCE:
	slot->mAbsMTDistance = rawEvent->value;
	break;
	case ABS_MT_TOOL_TYPE:
	slot->mAbsMTToolType = rawEvent->value;
	slot->mHaveAbsMTToolType = true;
	break;
	}
	}
	} else if (rawEvent->type == EV_SYN && rawEvent->code == SYN_MT_REPORT) {
	// MultiTouch Sync: The driver has returned all data for one of the pointers.
	mCurrentSlot += 1;
	}
	}

	void MultiTouchMotionAccumulator::finishSync() {
	if (!mUsingSlotsProtocol) {
	clearSlots(-1);
	}
	}

	bool MultiTouchMotionAccumulator::hasStylus() const {
	return mHaveStylus;
	}

	void MultiTouchMotionAccumulator::warnIfNotInUse(const RawEvent& event, const Slot& slot) {
	if (!slot.mInUse) {
	ALOGW("Received unexpected event (0x%0x, 0x%0x) for slot %i with tracking id %i",
	event.code, event.value, mCurrentSlot, slot.mAbsMTTrackingId);
	}
	}

	// --- MultiTouchMotionAccumulator::Slot ---

	MultiTouchMotionAccumulator::Slot::Slot() {
	clear();
	}

	void MultiTouchMotionAccumulator::Slot::clear() {
	mInUse = false;
	mHaveAbsMTTouchMinor = false;
	mHaveAbsMTWidthMinor = false;
	mHaveAbsMTToolType = false;
	mAbsMTPositionX = 0;
	mAbsMTPositionY = 0;
	mAbsMTTouchMajor = 0;
	mAbsMTTouchMinor = 0;
	mAbsMTWidthMajor = 0;
	mAbsMTWidthMinor = 0;
	mAbsMTOrientation = 0;
	mAbsMTTrackingId = -1;
	mAbsMTPressure = 0;
	mAbsMTDistance = 0;
	mAbsMTToolType = 0;
	}

	int32_t MultiTouchMotionAccumulator::Slot::getToolType() const {
	if (mHaveAbsMTToolType) {
	switch (mAbsMTToolType) {
	case MT_TOOL_FINGER:
	return AMOTION_EVENT_TOOL_TYPE_FINGER;
	case MT_TOOL_PEN:
	return AMOTION_EVENT_TOOL_TYPE_STYLUS;
	case MT_TOOL_PALM:
	return AMOTION_EVENT_TOOL_TYPE_PALM;
	}
	}
	return AMOTION_EVENT_TOOL_TYPE_UNKNOWN;
	}

	// --- MultiTouchInputMapper ---

	MultiTouchInputMapper::MultiTouchInputMapper(InputDeviceContext& deviceContext)
	: TouchInputMapper(deviceContext) {}

	MultiTouchInputMapper::~MultiTouchInputMapper() {}

	void MultiTouchInputMapper::reset(nsecs_t when) {
	mMultiTouchMotionAccumulator.reset(getDeviceContext());

	mPointerIdBits.clear();

	TouchInputMapper::reset(when);
	}

	void MultiTouchInputMapper::process(const RawEvent* rawEvent) {
	TouchInputMapper::process(rawEvent);

	mMultiTouchMotionAccumulator.process(rawEvent);
	}

	std::optional<int32_t> MultiTouchInputMapper::getActiveBitId(
	const MultiTouchMotionAccumulator::Slot& inSlot) {
	if (mHavePointerIds) {
	int32_t trackingId = inSlot.getTrackingId();
	for (BitSet32 idBits(mPointerIdBits); !idBits.isEmpty();) {
	int32_t n = idBits.clearFirstMarkedBit();
	if (mPointerTrackingIdMap[n] == trackingId) {
	return std::make_optional(n);
	}
	}
	}
	return std::nullopt;
	}

	void MultiTouchInputMapper::syncTouch(nsecs_t when, RawState* outState) {
	size_t inCount = mMultiTouchMotionAccumulator.getSlotCount();
	size_t outCount = 0;
	BitSet32 newPointerIdBits;
	mHavePointerIds = true;

	for (size_t inIndex = 0; inIndex < inCount; inIndex++) {
	const MultiTouchMotionAccumulator::Slot* inSlot =
	mMultiTouchMotionAccumulator.getSlot(inIndex);
	if (!inSlot->isInUse()) {
	continue;
	}

	if (inSlot->getToolType() == AMOTION_EVENT_TOOL_TYPE_PALM) {
	std::optional<int32_t> id = getActiveBitId(*inSlot);
	if (id) {
	outState->rawPointerData.canceledIdBits.markBit(id.value());
	}
	if (DEBUG_POINTERS) {
	ALOGI("Stop processing slot %zu for it received a palm event from device %s",
	inIndex, getDeviceName().c_str());
	}
	continue;
	}

	if (outCount >= MAX_POINTERS) {
	if (DEBUG_POINTERS) {
	ALOGD("MultiTouch device %s emitted more than maximum of %zu pointers; "
	"ignoring the rest.",
	getDeviceName().c_str(), MAX_POINTERS);
	}
	break; // too many fingers!
	}

	RawPointerData::Pointer& outPointer = outState->rawPointerData.pointers[outCount];
	outPointer.x = inSlot->getX();
	outPointer.y = inSlot->getY();
	outPointer.pressure = inSlot->getPressure();
	outPointer.touchMajor = inSlot->getTouchMajor();
	outPointer.touchMinor = inSlot->getTouchMinor();
	outPointer.toolMajor = inSlot->getToolMajor();
	outPointer.toolMinor = inSlot->getToolMinor();
	outPointer.orientation = inSlot->getOrientation();
	outPointer.distance = inSlot->getDistance();
	outPointer.tiltX = 0;
	outPointer.tiltY = 0;

	outPointer.toolType = inSlot->getToolType();
	if (outPointer.toolType == AMOTION_EVENT_TOOL_TYPE_UNKNOWN) {
	outPointer.toolType = mTouchButtonAccumulator.getToolType();
	if (outPointer.toolType == AMOTION_EVENT_TOOL_TYPE_UNKNOWN) {
	outPointer.toolType = AMOTION_EVENT_TOOL_TYPE_FINGER;
	}
	}
	if (shouldSimulateStylusWithTouch() &&
	outPointer.toolType == AMOTION_EVENT_TOOL_TYPE_FINGER) {
	outPointer.toolType = AMOTION_EVENT_TOOL_TYPE_STYLUS;
	}

	bool isHovering = mTouchButtonAccumulator.getToolType() != AMOTION_EVENT_TOOL_TYPE_MOUSE &&
	(mTouchButtonAccumulator.isHovering() \|\|
	(mRawPointerAxes.pressure.valid && inSlot->getPressure() <= 0));
	outPointer.isHovering = isHovering;

	// Assign pointer id using tracking id if available.
	if (mHavePointerIds) {
	int32_t trackingId = inSlot->getTrackingId();
	int32_t id = -1;
	if (trackingId >= 0) {
	for (BitSet32 idBits(mPointerIdBits); !idBits.isEmpty();) {
	uint32_t n = idBits.clearFirstMarkedBit();
	if (mPointerTrackingIdMap[n] == trackingId) {
	id = n;
	}
	}

	if (id < 0 && !mPointerIdBits.isFull()) {
	id = mPointerIdBits.markFirstUnmarkedBit();
	mPointerTrackingIdMap[id] = trackingId;
	}
	}
	if (id < 0) {
	mHavePointerIds = false;
	outState->rawPointerData.clearIdBits();
	newPointerIdBits.clear();
	} else {
	outPointer.id = id;
	outState->rawPointerData.idToIndex[id] = outCount;
	outState->rawPointerData.markIdBit(id, isHovering);
	newPointerIdBits.markBit(id);
	}
	}
	outCount += 1;
	}

	outState->rawPointerData.pointerCount = outCount;
	mPointerIdBits = newPointerIdBits;

	mMultiTouchMotionAccumulator.finishSync();
	}

	void MultiTouchInputMapper::configureRawPointerAxes() {
	TouchInputMapper::configureRawPointerAxes();

	getAbsoluteAxisInfo(ABS_MT_POSITION_X, &mRawPointerAxes.x);
	getAbsoluteAxisInfo(ABS_MT_POSITION_Y, &mRawPointerAxes.y);
	getAbsoluteAxisInfo(ABS_MT_TOUCH_MAJOR, &mRawPointerAxes.touchMajor);
	getAbsoluteAxisInfo(ABS_MT_TOUCH_MINOR, &mRawPointerAxes.touchMinor);
	getAbsoluteAxisInfo(ABS_MT_WIDTH_MAJOR, &mRawPointerAxes.toolMajor);
	getAbsoluteAxisInfo(ABS_MT_WIDTH_MINOR, &mRawPointerAxes.toolMinor);
	getAbsoluteAxisInfo(ABS_MT_ORIENTATION, &mRawPointerAxes.orientation);
	getAbsoluteAxisInfo(ABS_MT_PRESSURE, &mRawPointerAxes.pressure);
	getAbsoluteAxisInfo(ABS_MT_DISTANCE, &mRawPointerAxes.distance);
	getAbsoluteAxisInfo(ABS_MT_TRACKING_ID, &mRawPointerAxes.trackingId);
	getAbsoluteAxisInfo(ABS_MT_SLOT, &mRawPointerAxes.slot);

	if (mRawPointerAxes.trackingId.valid && mRawPointerAxes.slot.valid &&
	mRawPointerAxes.slot.minValue == 0 && mRawPointerAxes.slot.maxValue > 0) {
	size_t slotCount = mRawPointerAxes.slot.maxValue + 1;
	if (slotCount > MAX_SLOTS) {
	ALOGW("MultiTouch Device %s reported %zu slots but the framework "
	"only supports a maximum of %zu slots at this time.",
	getDeviceName().c_str(), slotCount, MAX_SLOTS);
	slotCount = MAX_SLOTS;
	}
	mMultiTouchMotionAccumulator.configure(getDeviceContext(), slotCount,
	true /usingSlotsProtocol/);
	} else {
	mMultiTouchMotionAccumulator.configure(getDeviceContext(), MAX_POINTERS,
	false /usingSlotsProtocol/);
	}
	}

	bool MultiTouchInputMapper::hasStylus() const {
	return mMultiTouchMotionAccumulator.hasStylus() \|\| mTouchButtonAccumulator.hasStylus() \|\|
	shouldSimulateStylusWithTouch();
	}

	bool MultiTouchInputMapper::shouldSimulateStylusWithTouch() const {
	static const bool SIMULATE_STYLUS_WITH_TOUCH =
	sysprop::InputProperties::simulate_stylus_with_touch().value_or(false);
	return SIMULATE_STYLUS_WITH_TOUCH &&
	mParameters.deviceType == Parameters::DeviceType::TOUCH_SCREEN;
	}

	} // namespace android