| /* |
| * Copyright 2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| //#define LOG_NDEBUG 0 |
| |
| #define ATRACE_TAG ATRACE_TAG_GRAPHICS |
| |
| #undef LOG_TAG |
| #define LOG_TAG "PowerAdvisor" |
| |
| #include <unistd.h> |
| #include <cinttypes> |
| #include <cstdint> |
| #include <optional> |
| |
| #include <android-base/properties.h> |
| #include <utils/Log.h> |
| #include <utils/Mutex.h> |
| #include <utils/Trace.h> |
| |
| #include <android/hardware/power/1.3/IPower.h> |
| #include <android/hardware/power/IPowerHintSession.h> |
| #include <android/hardware/power/WorkDuration.h> |
| |
| #include <binder/IServiceManager.h> |
| |
| #include "../SurfaceFlingerProperties.h" |
| |
| #include "PowerAdvisor.h" |
| #include "SurfaceFlinger.h" |
| |
| namespace android { |
| namespace Hwc2 { |
| |
| PowerAdvisor::~PowerAdvisor() = default; |
| |
| namespace impl { |
| |
| namespace V1_0 = android::hardware::power::V1_0; |
| namespace V1_3 = android::hardware::power::V1_3; |
| using V1_3::PowerHint; |
| |
| using android::hardware::power::Boost; |
| using android::hardware::power::IPower; |
| using android::hardware::power::IPowerHintSession; |
| using android::hardware::power::Mode; |
| using android::hardware::power::SessionHint; |
| using android::hardware::power::WorkDuration; |
| |
| PowerAdvisor::~PowerAdvisor() = default; |
| |
| namespace { |
| std::chrono::milliseconds getUpdateTimeout() { |
| // Default to a timeout of 80ms if nothing else is specified |
| static std::chrono::milliseconds timeout = |
| std::chrono::milliseconds(sysprop::display_update_imminent_timeout_ms(80)); |
| return timeout; |
| } |
| |
| void traceExpensiveRendering(bool enabled) { |
| if (enabled) { |
| ATRACE_ASYNC_BEGIN("ExpensiveRendering", 0); |
| } else { |
| ATRACE_ASYNC_END("ExpensiveRendering", 0); |
| } |
| } |
| |
| } // namespace |
| |
| PowerAdvisor::PowerAdvisor(SurfaceFlinger& flinger) : mFlinger(flinger) { |
| if (getUpdateTimeout() > 0ms) { |
| mScreenUpdateTimer.emplace("UpdateImminentTimer", getUpdateTimeout(), |
| /* resetCallback */ nullptr, |
| /* timeoutCallback */ |
| [this] { |
| while (true) { |
| auto timeSinceLastUpdate = std::chrono::nanoseconds( |
| systemTime() - mLastScreenUpdatedTime.load()); |
| if (timeSinceLastUpdate >= getUpdateTimeout()) { |
| break; |
| } |
| // We may try to disable expensive rendering and allow |
| // for sending DISPLAY_UPDATE_IMMINENT hints too early if |
| // we idled very shortly after updating the screen, so |
| // make sure we wait enough time. |
| std::this_thread::sleep_for(getUpdateTimeout() - |
| timeSinceLastUpdate); |
| } |
| mSendUpdateImminent.store(true); |
| mFlinger.disableExpensiveRendering(); |
| }); |
| } |
| } |
| |
| void PowerAdvisor::init() { |
| // Defer starting the screen update timer until SurfaceFlinger finishes construction. |
| if (mScreenUpdateTimer) { |
| mScreenUpdateTimer->start(); |
| } |
| } |
| |
| void PowerAdvisor::onBootFinished() { |
| mBootFinished.store(true); |
| } |
| |
| void PowerAdvisor::setExpensiveRenderingExpected(DisplayId displayId, bool expected) { |
| if (expected) { |
| mExpensiveDisplays.insert(displayId); |
| } else { |
| mExpensiveDisplays.erase(displayId); |
| } |
| |
| const bool expectsExpensiveRendering = !mExpensiveDisplays.empty(); |
| if (mNotifiedExpensiveRendering != expectsExpensiveRendering) { |
| std::lock_guard lock(mPowerHalMutex); |
| HalWrapper* const halWrapper = getPowerHal(); |
| if (halWrapper == nullptr) { |
| return; |
| } |
| |
| if (!halWrapper->setExpensiveRendering(expectsExpensiveRendering)) { |
| // The HAL has become unavailable; attempt to reconnect later |
| mReconnectPowerHal = true; |
| return; |
| } |
| |
| mNotifiedExpensiveRendering = expectsExpensiveRendering; |
| } |
| } |
| |
| void PowerAdvisor::notifyDisplayUpdateImminentAndCpuReset() { |
| // Only start sending this notification once the system has booted so we don't introduce an |
| // early-boot dependency on Power HAL |
| if (!mBootFinished.load()) { |
| return; |
| } |
| |
| if (mSendUpdateImminent.exchange(false)) { |
| std::lock_guard lock(mPowerHalMutex); |
| HalWrapper* const halWrapper = getPowerHal(); |
| if (halWrapper == nullptr) { |
| return; |
| } |
| |
| if (!halWrapper->notifyDisplayUpdateImminentAndCpuReset()) { |
| // The HAL has become unavailable; attempt to reconnect later |
| mReconnectPowerHal = true; |
| return; |
| } |
| |
| if (mScreenUpdateTimer) { |
| mScreenUpdateTimer->reset(); |
| } else { |
| // If we don't have a screen update timer, then we don't throttle power hal calls so |
| // flip this bit back to allow for calling into power hal again. |
| mSendUpdateImminent.store(true); |
| } |
| } |
| |
| if (mScreenUpdateTimer) { |
| mLastScreenUpdatedTime.store(systemTime()); |
| } |
| } |
| |
| // checks both if it supports and if it's enabled |
| bool PowerAdvisor::usePowerHintSession() { |
| // uses cached value since the underlying support and flag are unlikely to change at runtime |
| return mPowerHintEnabled.value_or(false) && supportsPowerHintSession(); |
| } |
| |
| bool PowerAdvisor::supportsPowerHintSession() { |
| // cache to avoid needing lock every time |
| if (!mSupportsPowerHint.has_value()) { |
| std::lock_guard lock(mPowerHalMutex); |
| HalWrapper* const halWrapper = getPowerHal(); |
| mSupportsPowerHint = halWrapper && halWrapper->supportsPowerHintSession(); |
| } |
| return *mSupportsPowerHint; |
| } |
| |
| bool PowerAdvisor::isPowerHintSessionRunning() { |
| return mPowerHintSessionRunning; |
| } |
| |
| void PowerAdvisor::setTargetWorkDuration(Duration targetDuration) { |
| if (!usePowerHintSession()) { |
| ALOGV("Power hint session target duration cannot be set, skipping"); |
| return; |
| } |
| { |
| std::lock_guard lock(mPowerHalMutex); |
| HalWrapper* const halWrapper = getPowerHal(); |
| if (halWrapper != nullptr) { |
| halWrapper->setTargetWorkDuration(targetDuration); |
| } |
| } |
| } |
| |
| void PowerAdvisor::sendActualWorkDuration() { |
| if (!mBootFinished || !usePowerHintSession()) { |
| ALOGV("Actual work duration power hint cannot be sent, skipping"); |
| return; |
| } |
| const std::optional<Duration> actualDuration = estimateWorkDuration(false); |
| if (actualDuration.has_value()) { |
| std::lock_guard lock(mPowerHalMutex); |
| HalWrapper* const halWrapper = getPowerHal(); |
| if (halWrapper != nullptr) { |
| halWrapper->sendActualWorkDuration(*actualDuration + kTargetSafetyMargin, |
| TimePoint::now()); |
| } |
| } |
| } |
| |
| void PowerAdvisor::sendPredictedWorkDuration() { |
| if (!mBootFinished || !usePowerHintSession()) { |
| ALOGV("Actual work duration power hint cannot be sent, skipping"); |
| return; |
| } |
| |
| const std::optional<Duration> predictedDuration = estimateWorkDuration(true); |
| |
| if (predictedDuration.has_value()) { |
| std::lock_guard lock(mPowerHalMutex); |
| HalWrapper* const halWrapper = getPowerHal(); |
| if (halWrapper != nullptr) { |
| halWrapper->sendActualWorkDuration(*predictedDuration + kTargetSafetyMargin, |
| TimePoint::now()); |
| } |
| } |
| } |
| |
| void PowerAdvisor::enablePowerHint(bool enabled) { |
| mPowerHintEnabled = enabled; |
| } |
| |
| bool PowerAdvisor::startPowerHintSession(const std::vector<int32_t>& threadIds) { |
| if (!usePowerHintSession()) { |
| ALOGI("Power hint session cannot be started, skipping"); |
| } |
| { |
| std::lock_guard lock(mPowerHalMutex); |
| HalWrapper* halWrapper = getPowerHal(); |
| if (halWrapper != nullptr && usePowerHintSession()) { |
| halWrapper->setPowerHintSessionThreadIds(threadIds); |
| mPowerHintSessionRunning = halWrapper->startPowerHintSession(); |
| } |
| } |
| return mPowerHintSessionRunning; |
| } |
| |
| void PowerAdvisor::setGpuFenceTime(DisplayId displayId, std::unique_ptr<FenceTime>&& fenceTime) { |
| DisplayTimingData& displayData = mDisplayTimingData[displayId]; |
| if (displayData.gpuEndFenceTime) { |
| nsecs_t signalTime = displayData.gpuEndFenceTime->getSignalTime(); |
| if (signalTime != Fence::SIGNAL_TIME_INVALID && signalTime != Fence::SIGNAL_TIME_PENDING) { |
| for (auto&& [_, otherDisplayData] : mDisplayTimingData) { |
| // If the previous display started before us but ended after we should have |
| // started, then it likely delayed our start time and we must compensate for that. |
| // Displays finishing earlier should have already made their way through this call |
| // and swapped their timing into "lastValid" from "latest", so we check that here. |
| if (!otherDisplayData.lastValidGpuStartTime.has_value()) continue; |
| if ((*otherDisplayData.lastValidGpuStartTime < *displayData.gpuStartTime) && |
| (*otherDisplayData.lastValidGpuEndTime > *displayData.gpuStartTime)) { |
| displayData.lastValidGpuStartTime = *otherDisplayData.lastValidGpuEndTime; |
| break; |
| } |
| } |
| displayData.lastValidGpuStartTime = displayData.gpuStartTime; |
| displayData.lastValidGpuEndTime = TimePoint::fromNs(signalTime); |
| } |
| } |
| displayData.gpuEndFenceTime = std::move(fenceTime); |
| displayData.gpuStartTime = TimePoint::now(); |
| } |
| |
| void PowerAdvisor::setHwcValidateTiming(DisplayId displayId, TimePoint validateStartTime, |
| TimePoint validateEndTime) { |
| DisplayTimingData& displayData = mDisplayTimingData[displayId]; |
| displayData.hwcValidateStartTime = validateStartTime; |
| displayData.hwcValidateEndTime = validateEndTime; |
| } |
| |
| void PowerAdvisor::setHwcPresentTiming(DisplayId displayId, TimePoint presentStartTime, |
| TimePoint presentEndTime) { |
| DisplayTimingData& displayData = mDisplayTimingData[displayId]; |
| displayData.hwcPresentStartTime = presentStartTime; |
| displayData.hwcPresentEndTime = presentEndTime; |
| } |
| |
| void PowerAdvisor::setSkippedValidate(DisplayId displayId, bool skipped) { |
| mDisplayTimingData[displayId].skippedValidate = skipped; |
| } |
| |
| void PowerAdvisor::setRequiresClientComposition(DisplayId displayId, |
| bool requiresClientComposition) { |
| mDisplayTimingData[displayId].usedClientComposition = requiresClientComposition; |
| } |
| |
| void PowerAdvisor::setExpectedPresentTime(TimePoint expectedPresentTime) { |
| mExpectedPresentTimes.append(expectedPresentTime); |
| } |
| |
| void PowerAdvisor::setSfPresentTiming(TimePoint presentFenceTime, TimePoint presentEndTime) { |
| mLastSfPresentEndTime = presentEndTime; |
| mLastPresentFenceTime = presentFenceTime; |
| } |
| |
| void PowerAdvisor::setFrameDelay(Duration frameDelayDuration) { |
| mFrameDelayDuration = frameDelayDuration; |
| } |
| |
| void PowerAdvisor::setHwcPresentDelayedTime(DisplayId displayId, TimePoint earliestFrameStartTime) { |
| mDisplayTimingData[displayId].hwcPresentDelayedTime = earliestFrameStartTime; |
| } |
| |
| void PowerAdvisor::setCommitStart(TimePoint commitStartTime) { |
| mCommitStartTimes.append(commitStartTime); |
| } |
| |
| void PowerAdvisor::setCompositeEnd(TimePoint compositeEndTime) { |
| mLastPostcompDuration = compositeEndTime - mLastSfPresentEndTime; |
| } |
| |
| void PowerAdvisor::setDisplays(std::vector<DisplayId>& displayIds) { |
| mDisplayIds = displayIds; |
| } |
| |
| void PowerAdvisor::setTotalFrameTargetWorkDuration(Duration targetDuration) { |
| mTotalFrameTargetDuration = targetDuration; |
| } |
| |
| std::vector<DisplayId> PowerAdvisor::getOrderedDisplayIds( |
| std::optional<TimePoint> DisplayTimingData::*sortBy) { |
| std::vector<DisplayId> sortedDisplays; |
| std::copy_if(mDisplayIds.begin(), mDisplayIds.end(), std::back_inserter(sortedDisplays), |
| [&](DisplayId id) { |
| return mDisplayTimingData.count(id) && |
| (mDisplayTimingData[id].*sortBy).has_value(); |
| }); |
| std::sort(sortedDisplays.begin(), sortedDisplays.end(), [&](DisplayId idA, DisplayId idB) { |
| return *(mDisplayTimingData[idA].*sortBy) < *(mDisplayTimingData[idB].*sortBy); |
| }); |
| return sortedDisplays; |
| } |
| |
| std::optional<Duration> PowerAdvisor::estimateWorkDuration(bool earlyHint) { |
| if (earlyHint && (!mExpectedPresentTimes.isFull() || !mCommitStartTimes.isFull())) { |
| return std::nullopt; |
| } |
| |
| // Tracks when we finish presenting to hwc |
| TimePoint estimatedEndTime = mCommitStartTimes[0]; |
| |
| // How long we spent this frame not doing anything, waiting for fences or vsync |
| Duration idleDuration = 0ns; |
| |
| // Most recent previous gpu end time in the current frame, probably from a prior display, used |
| // as the start time for the next gpu operation if it ran over time since it probably blocked |
| std::optional<TimePoint> previousValidGpuEndTime; |
| |
| // The currently estimated gpu end time for the frame, |
| // used to accumulate gpu time as we iterate over the active displays |
| std::optional<TimePoint> estimatedGpuEndTime; |
| |
| // If we're predicting at the start of the frame, we use last frame as our reference point |
| // If we're predicting at the end of the frame, we use the current frame as a reference point |
| TimePoint referenceFrameStartTime = (earlyHint ? mCommitStartTimes[-1] : mCommitStartTimes[0]); |
| |
| // When the prior frame should be presenting to the display |
| // If we're predicting at the start of the frame, we use last frame's expected present time |
| // If we're predicting at the end of the frame, the present fence time is already known |
| TimePoint lastFramePresentTime = |
| (earlyHint ? mExpectedPresentTimes[-1] : mLastPresentFenceTime); |
| |
| // The timing info for the previously calculated display, if there was one |
| std::optional<DisplayTimeline> previousDisplayReferenceTiming; |
| std::vector<DisplayId>&& displayIds = |
| getOrderedDisplayIds(&DisplayTimingData::hwcPresentStartTime); |
| DisplayTimeline referenceTiming, estimatedTiming; |
| |
| // Iterate over the displays that use hwc in the same order they are presented |
| for (DisplayId displayId : displayIds) { |
| if (mDisplayTimingData.count(displayId) == 0) { |
| continue; |
| } |
| |
| auto& displayData = mDisplayTimingData.at(displayId); |
| |
| // mLastPresentFenceTime should always be the time of the reference frame, since it will be |
| // the previous frame's present fence if called at the start, and current frame's if called |
| // at the end |
| referenceTiming = displayData.calculateDisplayTimeline(mLastPresentFenceTime); |
| |
| // If this is the first display, include the duration before hwc present starts |
| if (!previousDisplayReferenceTiming.has_value()) { |
| estimatedEndTime += referenceTiming.hwcPresentStartTime - referenceFrameStartTime; |
| } else { // Otherwise add the time since last display's hwc present finished |
| estimatedEndTime += referenceTiming.hwcPresentStartTime - |
| previousDisplayReferenceTiming->hwcPresentEndTime; |
| } |
| |
| // Late hint can re-use reference timing here since it's estimating its own reference frame |
| estimatedTiming = earlyHint |
| ? referenceTiming.estimateTimelineFromReference(lastFramePresentTime, |
| estimatedEndTime) |
| : referenceTiming; |
| |
| // Update predicted present finish time with this display's present time |
| estimatedEndTime = estimatedTiming.hwcPresentEndTime; |
| |
| // Track how long we spent waiting for the fence, can be excluded from the timing estimate |
| idleDuration += estimatedTiming.probablyWaitsForPresentFence |
| ? lastFramePresentTime - estimatedTiming.presentFenceWaitStartTime |
| : 0ns; |
| |
| // Track how long we spent waiting to present, can be excluded from the timing estimate |
| idleDuration += earlyHint ? 0ns : referenceTiming.hwcPresentDelayDuration; |
| |
| // Estimate the reference frame's gpu timing |
| auto gpuTiming = displayData.estimateGpuTiming(previousValidGpuEndTime); |
| if (gpuTiming.has_value()) { |
| previousValidGpuEndTime = gpuTiming->startTime + gpuTiming->duration; |
| |
| // Estimate the prediction frame's gpu end time from the reference frame |
| estimatedGpuEndTime = std::max(estimatedTiming.hwcPresentStartTime, |
| estimatedGpuEndTime.value_or(TimePoint{0ns})) + |
| gpuTiming->duration; |
| } |
| previousDisplayReferenceTiming = referenceTiming; |
| } |
| ATRACE_INT64("Idle duration", idleDuration.ns()); |
| |
| TimePoint estimatedFlingerEndTime = earlyHint ? estimatedEndTime : mLastSfPresentEndTime; |
| |
| // Don't count time spent idly waiting in the estimate as we could do more work in that time |
| estimatedEndTime -= idleDuration; |
| estimatedFlingerEndTime -= idleDuration; |
| |
| // We finish the frame when both present and the gpu are done, so wait for the later of the two |
| // Also add the frame delay duration since the target did not move while we were delayed |
| Duration totalDuration = mFrameDelayDuration + |
| std::max(estimatedEndTime, estimatedGpuEndTime.value_or(TimePoint{0ns})) - |
| mCommitStartTimes[0]; |
| |
| // We finish SurfaceFlinger when post-composition finishes, so add that in here |
| Duration flingerDuration = |
| estimatedFlingerEndTime + mLastPostcompDuration - mCommitStartTimes[0]; |
| |
| // Combine the two timings into a single normalized one |
| Duration combinedDuration = combineTimingEstimates(totalDuration, flingerDuration); |
| |
| return std::make_optional(combinedDuration); |
| } |
| |
| Duration PowerAdvisor::combineTimingEstimates(Duration totalDuration, Duration flingerDuration) { |
| Duration targetDuration{0ns}; |
| { |
| std::lock_guard lock(mPowerHalMutex); |
| targetDuration = *getPowerHal()->getTargetWorkDuration(); |
| } |
| if (!mTotalFrameTargetDuration.has_value()) return flingerDuration; |
| |
| // Normalize total to the flinger target (vsync period) since that's how often we actually send |
| // hints |
| Duration normalizedTotalDuration = Duration::fromNs((targetDuration.ns() * totalDuration.ns()) / |
| mTotalFrameTargetDuration->ns()); |
| return std::max(flingerDuration, normalizedTotalDuration); |
| } |
| |
| PowerAdvisor::DisplayTimeline PowerAdvisor::DisplayTimeline::estimateTimelineFromReference( |
| TimePoint fenceTime, TimePoint displayStartTime) { |
| DisplayTimeline estimated; |
| estimated.hwcPresentStartTime = displayStartTime; |
| |
| // We don't predict waiting for vsync alignment yet |
| estimated.hwcPresentDelayDuration = 0ns; |
| |
| // How long we expect to run before we start waiting for the fence |
| // For now just re-use last frame's post-present duration and assume it will not change much |
| // Excludes time spent waiting for vsync since that's not going to be consistent |
| estimated.presentFenceWaitStartTime = estimated.hwcPresentStartTime + |
| (presentFenceWaitStartTime - (hwcPresentStartTime + hwcPresentDelayDuration)); |
| estimated.probablyWaitsForPresentFence = fenceTime > estimated.presentFenceWaitStartTime; |
| estimated.hwcPresentEndTime = postPresentFenceHwcPresentDuration + |
| (estimated.probablyWaitsForPresentFence ? fenceTime |
| : estimated.presentFenceWaitStartTime); |
| return estimated; |
| } |
| |
| PowerAdvisor::DisplayTimeline PowerAdvisor::DisplayTimingData::calculateDisplayTimeline( |
| TimePoint fenceTime) { |
| DisplayTimeline timeline; |
| // How long between calling hwc present and trying to wait on the fence |
| const Duration fenceWaitStartDelay = |
| (skippedValidate ? kFenceWaitStartDelaySkippedValidate : kFenceWaitStartDelayValidated); |
| |
| // Did our reference frame wait for an appropriate vsync before calling into hwc |
| const bool waitedOnHwcPresentTime = hwcPresentDelayedTime.has_value() && |
| *hwcPresentDelayedTime > *hwcPresentStartTime && |
| *hwcPresentDelayedTime < *hwcPresentEndTime; |
| |
| // Use validate start here if we skipped it because we did validate + present together |
| timeline.hwcPresentStartTime = skippedValidate ? *hwcValidateStartTime : *hwcPresentStartTime; |
| |
| // Use validate end here if we skipped it because we did validate + present together |
| timeline.hwcPresentEndTime = skippedValidate ? *hwcValidateEndTime : *hwcPresentEndTime; |
| |
| // How long hwc present was delayed waiting for the next appropriate vsync |
| timeline.hwcPresentDelayDuration = |
| (waitedOnHwcPresentTime ? *hwcPresentDelayedTime - *hwcPresentStartTime : 0ns); |
| // When we started waiting for the present fence after calling into hwc present |
| timeline.presentFenceWaitStartTime = |
| timeline.hwcPresentStartTime + timeline.hwcPresentDelayDuration + fenceWaitStartDelay; |
| timeline.probablyWaitsForPresentFence = fenceTime > timeline.presentFenceWaitStartTime && |
| fenceTime < timeline.hwcPresentEndTime; |
| |
| // How long we ran after we finished waiting for the fence but before hwc present finished |
| timeline.postPresentFenceHwcPresentDuration = timeline.hwcPresentEndTime - |
| (timeline.probablyWaitsForPresentFence ? fenceTime |
| : timeline.presentFenceWaitStartTime); |
| return timeline; |
| } |
| |
| std::optional<PowerAdvisor::GpuTimeline> PowerAdvisor::DisplayTimingData::estimateGpuTiming( |
| std::optional<TimePoint> previousEndTime) { |
| if (!(usedClientComposition && lastValidGpuStartTime.has_value() && gpuEndFenceTime)) { |
| return std::nullopt; |
| } |
| const TimePoint latestGpuStartTime = |
| std::max(previousEndTime.value_or(TimePoint{0ns}), *gpuStartTime); |
| const nsecs_t gpuEndFenceSignal = gpuEndFenceTime->getSignalTime(); |
| Duration gpuDuration{0ns}; |
| if (gpuEndFenceSignal != Fence::SIGNAL_TIME_INVALID && |
| gpuEndFenceSignal != Fence::SIGNAL_TIME_PENDING) { |
| const TimePoint latestGpuEndTime = TimePoint::fromNs(gpuEndFenceSignal); |
| |
| // If we know how long the most recent gpu duration was, use that |
| gpuDuration = latestGpuEndTime - latestGpuStartTime; |
| } else if (lastValidGpuEndTime.has_value()) { |
| // If we don't have the fence data, use the most recent information we do have |
| gpuDuration = *lastValidGpuEndTime - *lastValidGpuStartTime; |
| if (gpuEndFenceSignal == Fence::SIGNAL_TIME_PENDING) { |
| // If pending but went over the previous duration, use current time as the end |
| gpuDuration = std::max(gpuDuration, Duration{TimePoint::now() - latestGpuStartTime}); |
| } |
| } |
| return GpuTimeline{.duration = gpuDuration, .startTime = latestGpuStartTime}; |
| } |
| |
| class HidlPowerHalWrapper : public PowerAdvisor::HalWrapper { |
| public: |
| HidlPowerHalWrapper(sp<V1_3::IPower> powerHal) : mPowerHal(std::move(powerHal)) {} |
| |
| ~HidlPowerHalWrapper() override = default; |
| |
| static std::unique_ptr<HalWrapper> connect() { |
| // Power HAL 1.3 is not guaranteed to be available, thus we need to query |
| // Power HAL 1.0 first and try to cast it to Power HAL 1.3. |
| sp<V1_3::IPower> powerHal = nullptr; |
| sp<V1_0::IPower> powerHal_1_0 = V1_0::IPower::getService(); |
| if (powerHal_1_0 != nullptr) { |
| // Try to cast to Power HAL 1.3 |
| powerHal = V1_3::IPower::castFrom(powerHal_1_0); |
| if (powerHal == nullptr) { |
| ALOGW("No Power HAL 1.3 service in system, disabling PowerAdvisor"); |
| } else { |
| ALOGI("Loaded Power HAL 1.3 service"); |
| } |
| } else { |
| ALOGW("No Power HAL found, disabling PowerAdvisor"); |
| } |
| |
| if (powerHal == nullptr) { |
| return nullptr; |
| } |
| |
| return std::make_unique<HidlPowerHalWrapper>(std::move(powerHal)); |
| } |
| |
| bool setExpensiveRendering(bool enabled) override { |
| ALOGV("HIDL setExpensiveRendering %s", enabled ? "T" : "F"); |
| auto ret = mPowerHal->powerHintAsync_1_3(PowerHint::EXPENSIVE_RENDERING, enabled); |
| if (ret.isOk()) { |
| traceExpensiveRendering(enabled); |
| } |
| return ret.isOk(); |
| } |
| |
| bool notifyDisplayUpdateImminentAndCpuReset() override { |
| // Power HAL 1.x doesn't have a notification for this |
| ALOGV("HIDL notifyUpdateImminent received but can't send"); |
| return true; |
| } |
| |
| bool supportsPowerHintSession() override { return false; } |
| |
| bool isPowerHintSessionRunning() override { return false; } |
| |
| void restartPowerHintSession() override {} |
| |
| void setPowerHintSessionThreadIds(const std::vector<int32_t>&) override {} |
| |
| bool startPowerHintSession() override { return false; } |
| |
| void setTargetWorkDuration(Duration) override {} |
| |
| void sendActualWorkDuration(Duration, TimePoint) override {} |
| |
| bool shouldReconnectHAL() override { return false; } |
| |
| std::vector<int32_t> getPowerHintSessionThreadIds() override { return std::vector<int32_t>{}; } |
| |
| std::optional<Duration> getTargetWorkDuration() override { return std::nullopt; } |
| |
| private: |
| const sp<V1_3::IPower> mPowerHal = nullptr; |
| }; |
| |
| AidlPowerHalWrapper::AidlPowerHalWrapper(sp<IPower> powerHal) : mPowerHal(std::move(powerHal)) { |
| auto ret = mPowerHal->isModeSupported(Mode::EXPENSIVE_RENDERING, &mHasExpensiveRendering); |
| if (!ret.isOk()) { |
| mHasExpensiveRendering = false; |
| } |
| |
| ret = mPowerHal->isBoostSupported(Boost::DISPLAY_UPDATE_IMMINENT, &mHasDisplayUpdateImminent); |
| if (!ret.isOk()) { |
| mHasDisplayUpdateImminent = false; |
| } |
| |
| mSupportsPowerHint = checkPowerHintSessionSupported(); |
| } |
| |
| AidlPowerHalWrapper::~AidlPowerHalWrapper() { |
| if (mPowerHintSession != nullptr) { |
| mPowerHintSession->close(); |
| mPowerHintSession = nullptr; |
| } |
| } |
| |
| std::unique_ptr<PowerAdvisor::HalWrapper> AidlPowerHalWrapper::connect() { |
| // This only waits if the service is actually declared |
| sp<IPower> powerHal = waitForVintfService<IPower>(); |
| if (powerHal == nullptr) { |
| return nullptr; |
| } |
| ALOGI("Loaded AIDL Power HAL service"); |
| |
| return std::make_unique<AidlPowerHalWrapper>(std::move(powerHal)); |
| } |
| |
| bool AidlPowerHalWrapper::setExpensiveRendering(bool enabled) { |
| ALOGV("AIDL setExpensiveRendering %s", enabled ? "T" : "F"); |
| if (!mHasExpensiveRendering) { |
| ALOGV("Skipped sending EXPENSIVE_RENDERING because HAL doesn't support it"); |
| return true; |
| } |
| |
| auto ret = mPowerHal->setMode(Mode::EXPENSIVE_RENDERING, enabled); |
| if (ret.isOk()) { |
| traceExpensiveRendering(enabled); |
| } |
| return ret.isOk(); |
| } |
| |
| bool AidlPowerHalWrapper::notifyDisplayUpdateImminentAndCpuReset() { |
| ALOGV("AIDL notifyDisplayUpdateImminentAndCpuReset"); |
| if (isPowerHintSessionRunning()) { |
| mPowerHintSession->sendHint(SessionHint::CPU_LOAD_RESET); |
| } |
| |
| if (!mHasDisplayUpdateImminent) { |
| ALOGV("Skipped sending DISPLAY_UPDATE_IMMINENT because HAL doesn't support it"); |
| return true; |
| } |
| |
| auto ret = mPowerHal->setBoost(Boost::DISPLAY_UPDATE_IMMINENT, 0); |
| return ret.isOk(); |
| } |
| |
| // Only version 2+ of the aidl supports power hint sessions, hidl has no support |
| bool AidlPowerHalWrapper::supportsPowerHintSession() { |
| return mSupportsPowerHint; |
| } |
| |
| bool AidlPowerHalWrapper::checkPowerHintSessionSupported() { |
| int64_t unused; |
| // Try to get preferred rate to determine if hint sessions are supported |
| // We check for isOk not EX_UNSUPPORTED_OPERATION to lump together errors |
| return mPowerHal->getHintSessionPreferredRate(&unused).isOk(); |
| } |
| |
| bool AidlPowerHalWrapper::isPowerHintSessionRunning() { |
| return mPowerHintSession != nullptr; |
| } |
| |
| void AidlPowerHalWrapper::closePowerHintSession() { |
| if (mPowerHintSession != nullptr) { |
| mPowerHintSession->close(); |
| mPowerHintSession = nullptr; |
| } |
| } |
| |
| void AidlPowerHalWrapper::restartPowerHintSession() { |
| closePowerHintSession(); |
| startPowerHintSession(); |
| } |
| |
| void AidlPowerHalWrapper::setPowerHintSessionThreadIds(const std::vector<int32_t>& threadIds) { |
| if (threadIds != mPowerHintThreadIds) { |
| mPowerHintThreadIds = threadIds; |
| if (isPowerHintSessionRunning()) { |
| restartPowerHintSession(); |
| } |
| } |
| } |
| |
| bool AidlPowerHalWrapper::startPowerHintSession() { |
| if (mPowerHintSession != nullptr || mPowerHintThreadIds.empty()) { |
| ALOGV("Cannot start power hint session, skipping"); |
| return false; |
| } |
| auto ret = mPowerHal->createHintSession(getpid(), static_cast<int32_t>(getuid()), |
| mPowerHintThreadIds, mTargetDuration.ns(), |
| &mPowerHintSession); |
| if (!ret.isOk()) { |
| ALOGW("Failed to start power hint session with error: %s", |
| ret.exceptionToString(ret.exceptionCode()).c_str()); |
| } else { |
| mLastTargetDurationSent = mTargetDuration; |
| } |
| return isPowerHintSessionRunning(); |
| } |
| |
| void AidlPowerHalWrapper::setTargetWorkDuration(Duration targetDuration) { |
| ATRACE_CALL(); |
| mTargetDuration = targetDuration; |
| if (sTraceHintSessionData) ATRACE_INT64("Time target", targetDuration.ns()); |
| if (isPowerHintSessionRunning() && (targetDuration != mLastTargetDurationSent)) { |
| ALOGV("Sending target time: %" PRId64 "ns", targetDuration.ns()); |
| mLastTargetDurationSent = targetDuration; |
| auto ret = mPowerHintSession->updateTargetWorkDuration(targetDuration.ns()); |
| if (!ret.isOk()) { |
| ALOGW("Failed to set power hint target work duration with error: %s", |
| ret.exceptionMessage().c_str()); |
| mShouldReconnectHal = true; |
| } |
| } |
| } |
| |
| void AidlPowerHalWrapper::sendActualWorkDuration(Duration actualDuration, TimePoint timestamp) { |
| ATRACE_CALL(); |
| if (actualDuration < 0ns || !isPowerHintSessionRunning()) { |
| ALOGV("Failed to send actual work duration, skipping"); |
| return; |
| } |
| mActualDuration = actualDuration; |
| WorkDuration duration; |
| duration.durationNanos = actualDuration.ns(); |
| duration.timeStampNanos = timestamp.ns(); |
| mPowerHintQueue.push_back(duration); |
| |
| if (sTraceHintSessionData) { |
| ATRACE_INT64("Measured duration", actualDuration.ns()); |
| ATRACE_INT64("Target error term", Duration{actualDuration - mTargetDuration}.ns()); |
| |
| ATRACE_INT64("Reported duration", actualDuration.ns()); |
| ATRACE_INT64("Reported target", mLastTargetDurationSent.ns()); |
| ATRACE_INT64("Reported target error term", |
| Duration{actualDuration - mLastTargetDurationSent}.ns()); |
| } |
| |
| ALOGV("Sending actual work duration of: %" PRId64 " on reported target: %" PRId64 |
| " with error: %" PRId64, |
| actualDuration.ns(), mLastTargetDurationSent.ns(), |
| Duration{actualDuration - mLastTargetDurationSent}.ns()); |
| |
| auto ret = mPowerHintSession->reportActualWorkDuration(mPowerHintQueue); |
| if (!ret.isOk()) { |
| ALOGW("Failed to report actual work durations with error: %s", |
| ret.exceptionMessage().c_str()); |
| mShouldReconnectHal = true; |
| } |
| mPowerHintQueue.clear(); |
| } |
| |
| bool AidlPowerHalWrapper::shouldReconnectHAL() { |
| return mShouldReconnectHal; |
| } |
| |
| std::vector<int32_t> AidlPowerHalWrapper::getPowerHintSessionThreadIds() { |
| return mPowerHintThreadIds; |
| } |
| |
| std::optional<Duration> AidlPowerHalWrapper::getTargetWorkDuration() { |
| return mTargetDuration; |
| } |
| |
| const bool AidlPowerHalWrapper::sTraceHintSessionData = |
| base::GetBoolProperty(std::string("debug.sf.trace_hint_sessions"), false); |
| |
| PowerAdvisor::HalWrapper* PowerAdvisor::getPowerHal() { |
| if (!mHasHal) { |
| return nullptr; |
| } |
| |
| // Grab old hint session values before we destroy any existing wrapper |
| std::vector<int32_t> oldPowerHintSessionThreadIds; |
| std::optional<Duration> oldTargetWorkDuration; |
| |
| if (mHalWrapper != nullptr) { |
| oldPowerHintSessionThreadIds = mHalWrapper->getPowerHintSessionThreadIds(); |
| oldTargetWorkDuration = mHalWrapper->getTargetWorkDuration(); |
| } |
| |
| // If we used to have a HAL, but it stopped responding, attempt to reconnect |
| if (mReconnectPowerHal) { |
| mHalWrapper = nullptr; |
| mReconnectPowerHal = false; |
| } |
| |
| if (mHalWrapper != nullptr) { |
| auto wrapper = mHalWrapper.get(); |
| // If the wrapper is fine, return it, but if it indicates a reconnect, remake it |
| if (!wrapper->shouldReconnectHAL()) { |
| return wrapper; |
| } |
| ALOGD("Reconnecting Power HAL"); |
| mHalWrapper = nullptr; |
| } |
| |
| // At this point, we know for sure there is no running session |
| mPowerHintSessionRunning = false; |
| |
| // First attempt to connect to the AIDL Power HAL |
| mHalWrapper = AidlPowerHalWrapper::connect(); |
| |
| // If that didn't succeed, attempt to connect to the HIDL Power HAL |
| if (mHalWrapper == nullptr) { |
| mHalWrapper = HidlPowerHalWrapper::connect(); |
| } else { |
| ALOGD("Successfully connecting AIDL Power HAL"); |
| // If AIDL, pass on any existing hint session values |
| mHalWrapper->setPowerHintSessionThreadIds(oldPowerHintSessionThreadIds); |
| // Only set duration and start if duration is defined |
| if (oldTargetWorkDuration.has_value()) { |
| mHalWrapper->setTargetWorkDuration(*oldTargetWorkDuration); |
| // Only start if possible to run and both threadids and duration are defined |
| if (usePowerHintSession() && !oldPowerHintSessionThreadIds.empty()) { |
| mPowerHintSessionRunning = mHalWrapper->startPowerHintSession(); |
| } |
| } |
| } |
| |
| // If we make it to this point and still don't have a HAL, it's unlikely we |
| // will, so stop trying |
| if (mHalWrapper == nullptr) { |
| mHasHal = false; |
| } |
| |
| return mHalWrapper.get(); |
| } |
| |
| } // namespace impl |
| } // namespace Hwc2 |
| } // namespace android |