|  | /* | 
|  | * Copyright (C) 2019 The Android Open Source Project | 
|  | * | 
|  | * Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | * you may not use this file except in compliance with the License. | 
|  | * You may obtain a copy of the License at | 
|  | * | 
|  | *      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | * | 
|  | * Unless required by applicable law or agreed to in writing, software | 
|  | * distributed under the License is distributed on an "AS IS" BASIS, | 
|  | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | * See the License for the specific language governing permissions and | 
|  | * limitations under the License. | 
|  | */ | 
|  |  | 
|  | #include "../InputClassifier.h" | 
|  | #include <gtest/gtest.h> | 
|  |  | 
|  | #include "TestInputListener.h" | 
|  |  | 
|  | #include <android/hardware/input/classifier/1.0/IInputClassifier.h> | 
|  |  | 
|  | using namespace android::hardware::input; | 
|  | using android::hardware::Return; | 
|  | using android::hardware::Void; | 
|  | using android::hardware::input::common::V1_0::Classification; | 
|  |  | 
|  | namespace android { | 
|  |  | 
|  | // --- InputClassifierTest --- | 
|  |  | 
|  | static NotifyMotionArgs generateBasicMotionArgs() { | 
|  | // Create a basic motion event for testing | 
|  | PointerProperties properties; | 
|  | properties.id = 0; | 
|  | properties.toolType = AMOTION_EVENT_TOOL_TYPE_FINGER; | 
|  |  | 
|  | PointerCoords coords; | 
|  | coords.clear(); | 
|  | coords.setAxisValue(AMOTION_EVENT_AXIS_X, 1); | 
|  | coords.setAxisValue(AMOTION_EVENT_AXIS_Y, 1); | 
|  | static constexpr nsecs_t downTime = 2; | 
|  | NotifyMotionArgs motionArgs(1 /*sequenceNum*/, downTime /*eventTime*/, 3 /*deviceId*/, | 
|  | AINPUT_SOURCE_ANY, ADISPLAY_ID_DEFAULT, 4 /*policyFlags*/, | 
|  | AMOTION_EVENT_ACTION_DOWN, 0 /*actionButton*/, 0 /*flags*/, | 
|  | AMETA_NONE, 0 /*buttonState*/, MotionClassification::NONE, | 
|  | AMOTION_EVENT_EDGE_FLAG_NONE, 1 /*pointerCount*/, &properties, | 
|  | &coords, 0 /*xPrecision*/, 0 /*yPrecision*/, | 
|  | AMOTION_EVENT_INVALID_CURSOR_POSITION, | 
|  | AMOTION_EVENT_INVALID_CURSOR_POSITION, downTime, | 
|  | {} /*videoFrames*/); | 
|  | return motionArgs; | 
|  | } | 
|  |  | 
|  | class InputClassifierTest : public testing::Test { | 
|  | protected: | 
|  | sp<InputClassifierInterface> mClassifier; | 
|  | sp<TestInputListener> mTestListener; | 
|  |  | 
|  | virtual void SetUp() override { | 
|  | mTestListener = new TestInputListener(); | 
|  | mClassifier = new InputClassifier(mTestListener); | 
|  | } | 
|  |  | 
|  | virtual void TearDown() override { | 
|  | mClassifier.clear(); | 
|  | mTestListener.clear(); | 
|  | } | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * Create a basic configuration change and send it to input classifier. | 
|  | * Expect that the event is received by the next input stage, unmodified. | 
|  | */ | 
|  | TEST_F(InputClassifierTest, SendToNextStage_NotifyConfigurationChangedArgs) { | 
|  | // Create a basic configuration change and send to classifier | 
|  | NotifyConfigurationChangedArgs args(1/*sequenceNum*/, 2/*eventTime*/); | 
|  |  | 
|  | mClassifier->notifyConfigurationChanged(&args); | 
|  | NotifyConfigurationChangedArgs outArgs; | 
|  | ASSERT_NO_FATAL_FAILURE(mTestListener->assertNotifyConfigurationChangedWasCalled(&outArgs)); | 
|  | ASSERT_EQ(args, outArgs); | 
|  | } | 
|  |  | 
|  | TEST_F(InputClassifierTest, SendToNextStage_NotifyKeyArgs) { | 
|  | // Create a basic key event and send to classifier | 
|  | NotifyKeyArgs args(1/*sequenceNum*/, 2/*eventTime*/, 3/*deviceId*/, AINPUT_SOURCE_KEYBOARD, | 
|  | ADISPLAY_ID_DEFAULT, 0/*policyFlags*/, AKEY_EVENT_ACTION_DOWN, 4/*flags*/, | 
|  | AKEYCODE_HOME, 5/*scanCode*/, AMETA_NONE, 6/*downTime*/); | 
|  |  | 
|  | mClassifier->notifyKey(&args); | 
|  | NotifyKeyArgs outArgs; | 
|  | ASSERT_NO_FATAL_FAILURE(mTestListener->assertNotifyKeyWasCalled(&outArgs)); | 
|  | ASSERT_EQ(args, outArgs); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * Create a basic motion event and send it to input classifier. | 
|  | * Expect that the event is received by the next input stage, unmodified. | 
|  | */ | 
|  | TEST_F(InputClassifierTest, SendToNextStage_NotifyMotionArgs) { | 
|  | NotifyMotionArgs motionArgs = generateBasicMotionArgs(); | 
|  | mClassifier->notifyMotion(&motionArgs); | 
|  | NotifyMotionArgs args; | 
|  | ASSERT_NO_FATAL_FAILURE(mTestListener->assertNotifyMotionWasCalled(&args)); | 
|  | ASSERT_EQ(motionArgs, args); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Create a basic switch event and send it to input classifier. | 
|  | * Expect that the event is received by the next input stage, unmodified. | 
|  | */ | 
|  | TEST_F(InputClassifierTest, SendToNextStage_NotifySwitchArgs) { | 
|  | NotifySwitchArgs args(1/*sequenceNum*/, 2/*eventTime*/, 3/*policyFlags*/, 4/*switchValues*/, | 
|  | 5/*switchMask*/); | 
|  |  | 
|  | mClassifier->notifySwitch(&args); | 
|  | NotifySwitchArgs outArgs; | 
|  | ASSERT_NO_FATAL_FAILURE(mTestListener->assertNotifySwitchWasCalled(&outArgs)); | 
|  | ASSERT_EQ(args, outArgs); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Create a basic device reset event and send it to input classifier. | 
|  | * Expect that the event is received by the next input stage, unmodified. | 
|  | */ | 
|  | TEST_F(InputClassifierTest, SendToNextStage_NotifyDeviceResetArgs) { | 
|  | NotifyDeviceResetArgs args(1/*sequenceNum*/, 2/*eventTime*/, 3/*deviceId*/); | 
|  |  | 
|  | mClassifier->notifyDeviceReset(&args); | 
|  | NotifyDeviceResetArgs outArgs; | 
|  | ASSERT_NO_FATAL_FAILURE(mTestListener->assertNotifyDeviceResetWasCalled(&outArgs)); | 
|  | ASSERT_EQ(args, outArgs); | 
|  | } | 
|  |  | 
|  | TEST_F(InputClassifierTest, SetMotionClassifier_Enabled) { | 
|  | mClassifier->setMotionClassifierEnabled(true); | 
|  | } | 
|  |  | 
|  | TEST_F(InputClassifierTest, SetMotionClassifier_Disabled) { | 
|  | mClassifier->setMotionClassifierEnabled(false); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Try to break it by calling setMotionClassifierEnabled multiple times. | 
|  | */ | 
|  | TEST_F(InputClassifierTest, SetMotionClassifier_Multiple) { | 
|  | mClassifier->setMotionClassifierEnabled(true); | 
|  | mClassifier->setMotionClassifierEnabled(true); | 
|  | mClassifier->setMotionClassifierEnabled(true); | 
|  | mClassifier->setMotionClassifierEnabled(false); | 
|  | mClassifier->setMotionClassifierEnabled(false); | 
|  | mClassifier->setMotionClassifierEnabled(true); | 
|  | mClassifier->setMotionClassifierEnabled(true); | 
|  | mClassifier->setMotionClassifierEnabled(true); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * A minimal implementation of IInputClassifier. | 
|  | */ | 
|  | struct TestHal : public android::hardware::input::classifier::V1_0::IInputClassifier { | 
|  | Return<Classification> classify( | 
|  | const android::hardware::input::common::V1_0::MotionEvent& event) override { | 
|  | return Classification::NONE; | 
|  | }; | 
|  | Return<void> reset() override { return Void(); }; | 
|  | Return<void> resetDevice(int32_t deviceId) override { return Void(); }; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * An entity that will be subscribed to the HAL death. | 
|  | */ | 
|  | class TestDeathRecipient : public android::hardware::hidl_death_recipient { | 
|  | public: | 
|  | virtual void serviceDied(uint64_t cookie, | 
|  | const wp<android::hidl::base::V1_0::IBase>& who) override{}; | 
|  | }; | 
|  |  | 
|  | // --- MotionClassifierTest --- | 
|  |  | 
|  | class MotionClassifierTest : public testing::Test { | 
|  | protected: | 
|  | std::unique_ptr<MotionClassifierInterface> mMotionClassifier; | 
|  |  | 
|  | virtual void SetUp() override { | 
|  | mMotionClassifier = MotionClassifier::create(new TestDeathRecipient()); | 
|  | if (mMotionClassifier == nullptr) { | 
|  | // If the device running this test does not have IInputClassifier service, | 
|  | // use the test HAL instead. | 
|  | // Using 'new' to access non-public constructor | 
|  | mMotionClassifier = | 
|  | std::unique_ptr<MotionClassifier>(new MotionClassifier(new TestHal())); | 
|  | } | 
|  | } | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * Since MotionClassifier creates a new thread to communicate with HAL, | 
|  | * it's not really expected to ever exit. However, for testing purposes, | 
|  | * we need to ensure that it is able to exit cleanly. | 
|  | * If the thread is not properly cleaned up, it will generate SIGABRT. | 
|  | * The logic for exiting the thread and cleaning up the resources is inside | 
|  | * the destructor. Here, we just make sure the destructor does not crash. | 
|  | */ | 
|  | TEST_F(MotionClassifierTest, Destructor_DoesNotCrash) { | 
|  | mMotionClassifier = nullptr; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Make sure MotionClassifier can handle events that don't have any | 
|  | * video frames. | 
|  | */ | 
|  | TEST_F(MotionClassifierTest, Classify_NoVideoFrames) { | 
|  | NotifyMotionArgs motionArgs = generateBasicMotionArgs(); | 
|  |  | 
|  | // We are not checking the return value, because we can't be making assumptions | 
|  | // about the HAL operation, since it will be highly hardware-dependent | 
|  | ASSERT_NO_FATAL_FAILURE(mMotionClassifier->classify(motionArgs)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Make sure nothing crashes when a videoFrame is sent. | 
|  | */ | 
|  | TEST_F(MotionClassifierTest, Classify_OneVideoFrame) { | 
|  | NotifyMotionArgs motionArgs = generateBasicMotionArgs(); | 
|  |  | 
|  | std::vector<int16_t> videoData = {1, 2, 3, 4}; | 
|  | timeval timestamp = { 1, 1}; | 
|  | TouchVideoFrame frame(2, 2, std::move(videoData), timestamp); | 
|  | motionArgs.videoFrames = {frame}; | 
|  |  | 
|  | // We are not checking the return value, because we can't be making assumptions | 
|  | // about the HAL operation, since it will be highly hardware-dependent | 
|  | ASSERT_NO_FATAL_FAILURE(mMotionClassifier->classify(motionArgs)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Make sure nothing crashes when 2 videoFrames are sent. | 
|  | */ | 
|  | TEST_F(MotionClassifierTest, Classify_TwoVideoFrames) { | 
|  | NotifyMotionArgs motionArgs = generateBasicMotionArgs(); | 
|  |  | 
|  | std::vector<int16_t> videoData1 = {1, 2, 3, 4}; | 
|  | timeval timestamp1 = { 1, 1}; | 
|  | TouchVideoFrame frame1(2, 2, std::move(videoData1), timestamp1); | 
|  |  | 
|  | std::vector<int16_t> videoData2 = {6, 6, 6, 6}; | 
|  | timeval timestamp2 = { 1, 2}; | 
|  | TouchVideoFrame frame2(2, 2, std::move(videoData2), timestamp2); | 
|  |  | 
|  | motionArgs.videoFrames = {frame1, frame2}; | 
|  |  | 
|  | // We are not checking the return value, because we can't be making assumptions | 
|  | // about the HAL operation, since it will be highly hardware-dependent | 
|  | ASSERT_NO_FATAL_FAILURE(mMotionClassifier->classify(motionArgs)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Make sure MotionClassifier does not crash when it is reset. | 
|  | */ | 
|  | TEST_F(MotionClassifierTest, Reset_DoesNotCrash) { | 
|  | ASSERT_NO_FATAL_FAILURE(mMotionClassifier->reset()); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Make sure MotionClassifier does not crash when a device is reset. | 
|  | */ | 
|  | TEST_F(MotionClassifierTest, DeviceReset_DoesNotCrash) { | 
|  | NotifyDeviceResetArgs args(1/*sequenceNum*/, 2/*eventTime*/, 3/*deviceId*/); | 
|  | ASSERT_NO_FATAL_FAILURE(mMotionClassifier->reset(args)); | 
|  | } | 
|  |  | 
|  | } // namespace android |