services/sensorservice/SensorDevice.h - android_frameworks_native - Gitiles

 /*
  * Copyright (C) 2010 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #ifndef ANDROID_SENSOR_DEVICE_H
 #define ANDROID_SENSOR_DEVICE_H

 #include "HidlSensorHalWrapper.h"
 #include "ISensorHalWrapper.h"

 #include "ISensorsWrapper.h"
 #include "SensorDeviceUtils.h"
 #include "SensorService.h"
 #include "SensorServiceUtils.h"

 #include <sensor/Sensor.h>
 #include <sensor/SensorEventQueue.h>
 #include <stdint.h>
 #include <sys/types.h>
 #include <utils/KeyedVector.h>
 #include <utils/Singleton.h>
 #include <utils/String8.h>
 #include <utils/Timers.h>

 #include <algorithm> //std::max std::min
 #include <condition_variable>
 #include <mutex>
 #include <queue>
 #include <string>
 #include <unordered_map>
 #include <vector>

 #include "RingBuffer.h"

 // ---------------------------------------------------------------------------

 namespace android {

 // ---------------------------------------------------------------------------

 class SensorDevice : public Singleton<SensorDevice>,
                      public SensorServiceUtil::Dumpable,
                      public ISensorHalWrapper::SensorDeviceCallback {
 public:
     ~SensorDevice();
     void prepareForReconnect();
     void reconnect();

     ssize_t getSensorList(sensor_t const** list);

     void handleDynamicSensorConnection(int handle, bool connected);
     status_t initCheck() const;
     int getHalDeviceVersion() const;

     ssize_t poll(sensors_event_t* buffer, size_t count);
     void writeWakeLockHandled(uint32_t count);

     status_t activate(void* ident, int handle, int enabled);
     status_t batch(void* ident, int handle, int flags, int64_t samplingPeriodNs,
                    int64_t maxBatchReportLatencyNs);
     // Call batch with timeout zero instead of calling setDelay() for newer devices.
     status_t setDelay(void* ident, int handle, int64_t ns);
     status_t flush(void* ident, int handle);
     status_t setMode(uint32_t mode);

     bool isDirectReportSupported() const;
     int32_t registerDirectChannel(const sensors_direct_mem_t* memory);
     void unregisterDirectChannel(int32_t channelHandle);
     int32_t configureDirectChannel(int32_t sensorHandle, int32_t channelHandle,
                                    const struct sensors_direct_cfg_t* config);

     void disableAllSensors();
     void enableAllSensors();
     void autoDisable(void* ident, int handle);

     status_t injectSensorData(const sensors_event_t* event);
     void notifyConnectionDestroyed(void* ident);

     // SensorDeviceCallback
     virtual void onDynamicSensorsConnected(
             const std::vector<sensor_t>& dynamicSensorsAdded) override;
     virtual void onDynamicSensorsDisconnected(
             const std::vector<int32_t>& dynamicSensorHandlesRemoved) override;

     void setUidStateForConnection(void* ident, SensorService::UidState state);

     bool isReconnecting() const { return mHalWrapper->mReconnecting; }

     bool isSensorActive(int handle) const;

     // To update the BatchParams of a SensorEventConnection when the mic toggle changes its state
     // while the Sensors Off toggle is on.
     void onMicSensorAccessChanged(void* ident, int handle, nsecs_t samplingPeriodNs);

     // Dumpable
     virtual std::string dump() const override;
     virtual void dump(util::ProtoOutputStream* proto) const override;

 private:
     friend class Singleton<SensorDevice>;

     std::unique_ptr<ISensorHalWrapper> mHalWrapper;

     std::vector<sensor_t> mSensorList;
     std::unordered_map<int32_t, sensor_t> mConnectedDynamicSensors;

     // A bug in the Sensors HIDL spec which marks onDynamicSensorsConnected as oneway causes dynamic
     // meta events and onDynamicSensorsConnected to be received out of order. This mutex + CV are
     // used to block meta event processing until onDynamicSensorsConnected is received to simplify
     // HAL implementations.
     std::mutex mDynamicSensorsMutex;
     std::condition_variable mDynamicSensorsCv;
     static constexpr std::chrono::seconds MAX_DYN_SENSOR_WAIT{5};

     static const nsecs_t MINIMUM_EVENTS_PERIOD = 1000000; // 1000 Hz
     mutable Mutex mLock;                                  // protect mActivationCount[].batchParams
     // fixed-size array after construction

     // Struct to store all the parameters(samplingPeriod, maxBatchReportLatency and flags) from
     // batch call. For continous mode clients, maxBatchReportLatency is set to zero.
     struct BatchParams {
         nsecs_t mTSample, mTBatch;
         BatchParams() : mTSample(INT64_MAX), mTBatch(INT64_MAX) {}
         BatchParams(nsecs_t tSample, nsecs_t tBatch) : mTSample(tSample), mTBatch(tBatch) {}
         bool operator!=(const BatchParams& other) {
             return !(mTSample == other.mTSample && mTBatch == other.mTBatch);
         }
         // Merge another parameter with this one. The updated mTSample will be the min of the two.
         // The update mTBatch will be the min of original mTBatch and the apparent batch period
         // of the other. the apparent batch is the maximum of mTBatch and mTSample,
         void merge(const BatchParams& other) {
             mTSample = std::min(mTSample, other.mTSample);
             mTBatch = std::min(mTBatch, std::max(other.mTBatch, other.mTSample));
         }
     };

     // Store batch parameters in the KeyedVector and the optimal batch_rate and timeout in
     // bestBatchParams. For every batch() call corresponding params are stored in batchParams
     // vector. A continuous mode request is batch(... timeout=0 ..) followed by activate(). A batch
     // mode request is batch(... timeout > 0 ...) followed by activate().
     // Info is a per-sensor data structure which contains the batch parameters for each client that
     // has registered for this sensor.
     struct Info {
         BatchParams bestBatchParams;
         // Key is the unique identifier(ident) for each client, value is the batch parameters
         // requested by the client.
         KeyedVector<void*, BatchParams> batchParams;

         // Flag to track if the sensor is active
         bool isActive = false;

         // Sets batch parameters for this ident. Returns error if this ident is not already present
         // in the KeyedVector above.
         status_t setBatchParamsForIdent(void* ident, int flags, int64_t samplingPeriodNs,
                                         int64_t maxBatchReportLatencyNs);
         // Finds the optimal parameters for batching and stores them in bestBatchParams variable.
         void selectBatchParams();
         // Removes batchParams for an ident and re-computes bestBatchParams. Returns the index of
         // the removed ident. If index >=0, ident is present and successfully removed.
         ssize_t removeBatchParamsForIdent(void* ident);

         bool hasBatchParamsForIdent(void* ident) const {
             return batchParams.indexOfKey(ident) >= 0;
         }

         /**
          * @return The number of active clients of this sensor.
          */
         int numActiveClients() const;
     };
     DefaultKeyedVector<int, Info> mActivationCount;

     int mTotalHidlTransportErrors;

     /**
      * Enums describing the reason why a client was disabled.
      */
     enum DisabledReason : uint8_t {
         // UID becomes idle (e.g. app goes to background).
         DISABLED_REASON_UID_IDLE = 0,

         // Sensors are restricted for all clients.
         DISABLED_REASON_SERVICE_RESTRICTED,
         DISABLED_REASON_MAX,
     };

     static_assert(DisabledReason::DISABLED_REASON_MAX < sizeof(uint8_t) * CHAR_BIT);

     // Use this map to determine which client is activated or deactivated.
     std::unordered_map<void*, uint8_t> mDisabledClients;

     void addDisabledReasonForIdentLocked(void* ident, DisabledReason reason);
     void removeDisabledReasonForIdentLocked(void* ident, DisabledReason reason);

     SensorDevice();
     bool connectHalService();
     void initializeSensorList();
     void reactivateSensors(const DefaultKeyedVector<int, Info>& previousActivations);
     static bool sensorHandlesChanged(const std::vector<sensor_t>& oldSensorList,
                                      const std::vector<sensor_t>& newSensorList);
     static bool sensorIsEquivalent(const sensor_t& prevSensor, const sensor_t& newSensor);

     status_t activateLocked(void* ident, int handle, int enabled);
     status_t batchLocked(void* ident, int handle, int flags, int64_t samplingPeriodNs,
                          int64_t maxBatchReportLatencyNs);

     status_t updateBatchParamsLocked(int handle, Info& info);
     status_t doActivateHardwareLocked(int handle, bool enable);

     bool isClientDisabled(void* ident) const;
     bool isClientDisabledLocked(void* ident) const;
     std::vector<void*> getDisabledClientsLocked() const;

     bool clientHasNoAccessLocked(void* ident) const;

     float getResolutionForSensor(int sensorHandle);

     bool mIsDirectReportSupported;

     std::mutex mHalBypassLock;
     std::condition_variable mHalBypassCV;
     std::queue<sensors_event_t> mHalBypassInjectedEventQueue;
     ssize_t getHalBypassInjectedEvents(sensors_event_t* buffer, size_t count);
     bool mInHalBypassMode;
 };

 // ---------------------------------------------------------------------------
 }; // namespace android

 #endif // ANDROID_SENSOR_DEVICE_H
	/*
	* Copyright (C) 2010 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#ifndef ANDROID_SENSOR_DEVICE_H
	#define ANDROID_SENSOR_DEVICE_H

	#include "HidlSensorHalWrapper.h"
	#include "ISensorHalWrapper.h"

	#include "ISensorsWrapper.h"
	#include "SensorDeviceUtils.h"
	#include "SensorService.h"
	#include "SensorServiceUtils.h"

	#include <sensor/Sensor.h>
	#include <sensor/SensorEventQueue.h>
	#include <stdint.h>
	#include <sys/types.h>
	#include <utils/KeyedVector.h>
	#include <utils/Singleton.h>
	#include <utils/String8.h>
	#include <utils/Timers.h>

	#include <algorithm> //std::max std::min
	#include <condition_variable>
	#include <mutex>
	#include <queue>
	#include <string>
	#include <unordered_map>
	#include <vector>

	#include "RingBuffer.h"

	// ---------------------------------------------------------------------------

	namespace android {

	// ---------------------------------------------------------------------------

	class SensorDevice : public Singleton<SensorDevice>,
	public SensorServiceUtil::Dumpable,
	public ISensorHalWrapper::SensorDeviceCallback {
	public:
	~SensorDevice();
	void prepareForReconnect();
	void reconnect();

	ssize_t getSensorList(sensor_t const** list);

	void handleDynamicSensorConnection(int handle, bool connected);
	status_t initCheck() const;
	int getHalDeviceVersion() const;

	ssize_t poll(sensors_event_t* buffer, size_t count);
	void writeWakeLockHandled(uint32_t count);

	status_t activate(void* ident, int handle, int enabled);
	status_t batch(void* ident, int handle, int flags, int64_t samplingPeriodNs,
	int64_t maxBatchReportLatencyNs);
	// Call batch with timeout zero instead of calling setDelay() for newer devices.
	status_t setDelay(void* ident, int handle, int64_t ns);
	status_t flush(void* ident, int handle);
	status_t setMode(uint32_t mode);

	bool isDirectReportSupported() const;
	int32_t registerDirectChannel(const sensors_direct_mem_t* memory);
	void unregisterDirectChannel(int32_t channelHandle);
	int32_t configureDirectChannel(int32_t sensorHandle, int32_t channelHandle,
	const struct sensors_direct_cfg_t* config);

	void disableAllSensors();
	void enableAllSensors();
	void autoDisable(void* ident, int handle);

	status_t injectSensorData(const sensors_event_t* event);
	void notifyConnectionDestroyed(void* ident);

	// SensorDeviceCallback
	virtual void onDynamicSensorsConnected(
	const std::vector<sensor_t>& dynamicSensorsAdded) override;
	virtual void onDynamicSensorsDisconnected(
	const std::vector<int32_t>& dynamicSensorHandlesRemoved) override;

	void setUidStateForConnection(void* ident, SensorService::UidState state);

	bool isReconnecting() const { return mHalWrapper->mReconnecting; }

	bool isSensorActive(int handle) const;

	// To update the BatchParams of a SensorEventConnection when the mic toggle changes its state
	// while the Sensors Off toggle is on.
	void onMicSensorAccessChanged(void* ident, int handle, nsecs_t samplingPeriodNs);

	// Dumpable
	virtual std::string dump() const override;
	virtual void dump(util::ProtoOutputStream* proto) const override;

	private:
	friend class Singleton<SensorDevice>;

	std::unique_ptr<ISensorHalWrapper> mHalWrapper;

	std::vector<sensor_t> mSensorList;
	std::unordered_map<int32_t, sensor_t> mConnectedDynamicSensors;

	// A bug in the Sensors HIDL spec which marks onDynamicSensorsConnected as oneway causes dynamic
	// meta events and onDynamicSensorsConnected to be received out of order. This mutex + CV are
	// used to block meta event processing until onDynamicSensorsConnected is received to simplify
	// HAL implementations.
	std::mutex mDynamicSensorsMutex;
	std::condition_variable mDynamicSensorsCv;
	static constexpr std::chrono::seconds MAX_DYN_SENSOR_WAIT{5};

	static const nsecs_t MINIMUM_EVENTS_PERIOD = 1000000; // 1000 Hz
	mutable Mutex mLock; // protect mActivationCount[].batchParams
	// fixed-size array after construction

	// Struct to store all the parameters(samplingPeriod, maxBatchReportLatency and flags) from
	// batch call. For continous mode clients, maxBatchReportLatency is set to zero.
	struct BatchParams {
	nsecs_t mTSample, mTBatch;
	BatchParams() : mTSample(INT64_MAX), mTBatch(INT64_MAX) {}
	BatchParams(nsecs_t tSample, nsecs_t tBatch) : mTSample(tSample), mTBatch(tBatch) {}
	bool operator!=(const BatchParams& other) {
	return !(mTSample == other.mTSample && mTBatch == other.mTBatch);
	}
	// Merge another parameter with this one. The updated mTSample will be the min of the two.
	// The update mTBatch will be the min of original mTBatch and the apparent batch period
	// of the other. the apparent batch is the maximum of mTBatch and mTSample,
	void merge(const BatchParams& other) {
	mTSample = std::min(mTSample, other.mTSample);
	mTBatch = std::min(mTBatch, std::max(other.mTBatch, other.mTSample));
	}
	};

	// Store batch parameters in the KeyedVector and the optimal batch_rate and timeout in
	// bestBatchParams. For every batch() call corresponding params are stored in batchParams
	// vector. A continuous mode request is batch(... timeout=0 ..) followed by activate(). A batch
	// mode request is batch(... timeout > 0 ...) followed by activate().
	// Info is a per-sensor data structure which contains the batch parameters for each client that
	// has registered for this sensor.
	struct Info {
	BatchParams bestBatchParams;
	// Key is the unique identifier(ident) for each client, value is the batch parameters
	// requested by the client.
	KeyedVector<void*, BatchParams> batchParams;

	// Flag to track if the sensor is active
	bool isActive = false;

	// Sets batch parameters for this ident. Returns error if this ident is not already present
	// in the KeyedVector above.
	status_t setBatchParamsForIdent(void* ident, int flags, int64_t samplingPeriodNs,
	int64_t maxBatchReportLatencyNs);
	// Finds the optimal parameters for batching and stores them in bestBatchParams variable.
	void selectBatchParams();
	// Removes batchParams for an ident and re-computes bestBatchParams. Returns the index of
	// the removed ident. If index >=0, ident is present and successfully removed.
	ssize_t removeBatchParamsForIdent(void* ident);

	bool hasBatchParamsForIdent(void* ident) const {
	return batchParams.indexOfKey(ident) >= 0;
	}

	/**
	* @return The number of active clients of this sensor.
	*/
	int numActiveClients() const;
	};
	DefaultKeyedVector<int, Info> mActivationCount;

	int mTotalHidlTransportErrors;

	/**
	* Enums describing the reason why a client was disabled.
	*/
	enum DisabledReason : uint8_t {
	// UID becomes idle (e.g. app goes to background).
	DISABLED_REASON_UID_IDLE = 0,

	// Sensors are restricted for all clients.
	DISABLED_REASON_SERVICE_RESTRICTED,
	DISABLED_REASON_MAX,
	};

	static_assert(DisabledReason::DISABLED_REASON_MAX < sizeof(uint8_t) * CHAR_BIT);

	// Use this map to determine which client is activated or deactivated.
	std::unordered_map<void*, uint8_t> mDisabledClients;

	void addDisabledReasonForIdentLocked(void* ident, DisabledReason reason);
	void removeDisabledReasonForIdentLocked(void* ident, DisabledReason reason);

	SensorDevice();
	bool connectHalService();
	void initializeSensorList();
	void reactivateSensors(const DefaultKeyedVector<int, Info>& previousActivations);
	static bool sensorHandlesChanged(const std::vector<sensor_t>& oldSensorList,
	const std::vector<sensor_t>& newSensorList);
	static bool sensorIsEquivalent(const sensor_t& prevSensor, const sensor_t& newSensor);

	status_t activateLocked(void* ident, int handle, int enabled);
	status_t batchLocked(void* ident, int handle, int flags, int64_t samplingPeriodNs,
	int64_t maxBatchReportLatencyNs);

	status_t updateBatchParamsLocked(int handle, Info& info);
	status_t doActivateHardwareLocked(int handle, bool enable);

	bool isClientDisabled(void* ident) const;
	bool isClientDisabledLocked(void* ident) const;
	std::vector<void*> getDisabledClientsLocked() const;

	bool clientHasNoAccessLocked(void* ident) const;

	float getResolutionForSensor(int sensorHandle);

	bool mIsDirectReportSupported;

	std::mutex mHalBypassLock;
	std::condition_variable mHalBypassCV;
	std::queue<sensors_event_t> mHalBypassInjectedEventQueue;
	ssize_t getHalBypassInjectedEvents(sensors_event_t* buffer, size_t count);
	bool mInHalBypassMode;
	};

	// ---------------------------------------------------------------------------
	}; // namespace android

	#endif // ANDROID_SENSOR_DEVICE_H