| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * Hardware Composer Rectangles |
| * |
| * Synopsis |
| * hwcRects [options] (graphicFormat displayFrame [attributes],)... |
| * options: |
| * -D #.## - End of test delay |
| * -v - Verbose |
| * |
| * graphic formats: |
| * RGBA8888 (reference frame default) |
| * RGBX8888 |
| * RGB888 |
| * RGB565 |
| * BGRA8888 |
| * RGBA5551 |
| * RGBA4444 |
| * YV12 |
| * |
| * displayFrame |
| * [left, top, right, bottom] |
| * |
| * attributes: |
| * transform: none | fliph | flipv | rot90 | rot180 | rot270 |
| * blend: none | premult | coverage |
| * color: [0.##, 0.##, 0.##] |
| * alpha: 0.## |
| * sourceDim: [width, height] |
| * sourceCrop: [left, top, right, bottom] |
| * |
| * Example: |
| * # White YV12 rectangle, with overlapping turquoise |
| * # RGBA8888 rectangle at 30%% (alpha: 0.7) transparency |
| * hwcRects -v -D 30.0 \ |
| * YV12 [50, 80, 200, 300] transform: none \ |
| * color: [1.0, 0.5, 0.5], \ |
| * RGBA8888 [100, 150, 300, 400] blend: coverage \ |
| * color: [0.251, 0.878, 0.816] alpha: 0.7 \ |
| * sourceDim: [50, 60] sourceCrop: [5, 8, 12, 15] |
| * |
| * Description |
| * Constructs a Hardware Composer (HWC) list of frames from |
| * command-line specified parameters. Then sends it to the HWC |
| * be rendered. The intended purpose of this tool is as a means to |
| * reproduce and succinctly specify an observed HWC operation, with |
| * no need to modify/compile a program. |
| * |
| * The command-line syntax consists of a few standard command-line |
| * options and then a description of one or more frames. The frame |
| * descriptions are separated from one another via a comma. The |
| * beginning of a frame description requires the specification |
| * of the graphic format and then the display frame rectangle where |
| * the frame will be displayed. The display frame rectangle is |
| * specified as follows, with the right and bottom coordinates being |
| * exclusive values: |
| * |
| * [left, top, right, bottom] |
| * |
| * After these two required parameters each frame description can |
| * specify 1 or more optional attributes. The name of each optional |
| * attribute is preceded by a colon. The current implementation |
| * then requires white space after the colon and then the value of |
| * the attribute is specified. See the synopsis section above for |
| * a list of attributes and the format of their expected value. |
| */ |
| |
| #include <algorithm> |
| #include <assert.h> |
| #include <cerrno> |
| #include <cmath> |
| #include <cstdlib> |
| #include <ctime> |
| #include <istream> |
| #include <libgen.h> |
| #include <list> |
| #include <sched.h> |
| #include <sstream> |
| #include <stdint.h> |
| #include <string.h> |
| #include <unistd.h> |
| |
| #include <sys/syscall.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| |
| #include <EGL/egl.h> |
| #include <EGL/eglext.h> |
| #include <GLES2/gl2.h> |
| #include <GLES2/gl2ext.h> |
| |
| #include <ui/FramebufferNativeWindow.h> |
| #include <ui/GraphicBuffer.h> |
| #include <ui/EGLUtils.h> |
| |
| #define LOG_TAG "hwcRectsTest" |
| #include <utils/Log.h> |
| #include <testUtil.h> |
| |
| #include <hardware/hwcomposer.h> |
| |
| #include <glTestLib.h> |
| #include <hwc/hwcTestLib.h> |
| |
| using namespace std; |
| using namespace android; |
| |
| // Defaults |
| const bool defaultVerbose = false; |
| const float defaultEndDelay = 2.0; // Default delay after rendering graphics |
| |
| const uint32_t defaultFormat = HAL_PIXEL_FORMAT_RGBA_8888; |
| const int32_t defaultTransform = 0; |
| const uint32_t defaultBlend = HWC_BLENDING_NONE; |
| const ColorFract defaultColor(0.5, 0.5, 0.5); |
| const float defaultAlpha = 1.0; // Opaque |
| const HwcTestDim defaultSourceDim(1, 1); |
| const struct hwc_rect defaultSourceCrop = {0, 0, 1, 1}; |
| const struct hwc_rect defaultDisplayFrame = {0, 0, 100, 100}; |
| |
| // Defines |
| #define MAXCMD 200 |
| #define CMD_STOP_FRAMEWORK "stop 2>&1" |
| #define CMD_START_FRAMEWORK "start 2>&1" |
| |
| // Macros |
| #define NUMA(a) (sizeof(a) / sizeof(a [0])) // Num elements in an array |
| |
| // Local types |
| class Rectangle { |
| public: |
| Rectangle() : format(defaultFormat), transform(defaultTransform), |
| blend(defaultBlend), color(defaultColor), |
| alpha(defaultAlpha), sourceDim(defaultSourceDim), |
| sourceCrop(defaultSourceCrop), |
| displayFrame(defaultDisplayFrame) {}; |
| |
| uint32_t format; |
| uint32_t transform; |
| int32_t blend; |
| ColorFract color; |
| float alpha; |
| HwcTestDim sourceDim; |
| struct hwc_rect sourceCrop; |
| struct hwc_rect displayFrame; |
| |
| sp<GraphicBuffer> texture; |
| }; |
| |
| // Globals |
| list<Rectangle> rectangle; |
| static const int texUsage = GraphicBuffer::USAGE_HW_TEXTURE | |
| GraphicBuffer::USAGE_SW_WRITE_RARELY; |
| static hwc_composer_device_t *hwcDevice; |
| static EGLDisplay dpy; |
| static EGLSurface surface; |
| static EGLint width, height; |
| |
| // Function prototypes |
| static Rectangle parseRect(string rectStr); |
| void init(void); |
| void printSyntax(const char *cmd); |
| |
| // Command-line option settings |
| static bool verbose = defaultVerbose; |
| static float endDelay = defaultEndDelay; |
| |
| /* |
| * Main |
| * |
| * Performs the following high-level sequence of operations: |
| * |
| * 1. Parse command-line options |
| * |
| * 2. Stop framework |
| * |
| * 3. Initialization |
| * |
| * 4. Parse frame descriptions |
| * |
| * 5. Create HWC list from frame descriptions |
| * |
| * 6. Have HWC render the list description of the frames |
| * |
| * 7. Delay for amount of time given by endDelay |
| * |
| * 8. Start framework |
| */ |
| int |
| main(int argc, char *argv[]) |
| { |
| int rv, opt; |
| char *chptr; |
| bool error; |
| string str; |
| char cmd[MAXCMD]; |
| |
| testSetLogCatTag(LOG_TAG); |
| |
| // Parse command line arguments |
| while ((opt = getopt(argc, argv, "D:v?h")) != -1) { |
| switch (opt) { |
| case 'D': // End of test delay |
| endDelay = strtod(optarg, &chptr); |
| if ((*chptr != '\0') || (endDelay < 0.0)) { |
| testPrintE("Invalid command-line specified end of test delay " |
| "of: %s", optarg); |
| exit(1); |
| } |
| break; |
| |
| case 'v': // Verbose |
| verbose = true; |
| break; |
| |
| case 'h': // Help |
| case '?': |
| default: |
| printSyntax(basename(argv[0])); |
| exit(((optopt == 0) || (optopt == '?')) ? 0 : 2); |
| } |
| } |
| |
| // Stop framework |
| rv = snprintf(cmd, sizeof(cmd), "%s", CMD_STOP_FRAMEWORK); |
| if (rv >= (signed) sizeof(cmd) - 1) { |
| testPrintE("Command too long for: %s", CMD_STOP_FRAMEWORK); |
| exit(3); |
| } |
| testExecCmd(cmd); |
| testDelay(1.0); // TODO - needs means to query whether asyncronous stop |
| // framework operation has completed. For now, just wait |
| // a long time. |
| |
| init(); |
| |
| // Parse rectangle descriptions |
| int numOpen = 0; // Current number of unmatched <[ |
| string rectDesc(""); // String description of a single rectangle |
| while (optind < argc) { |
| string argNext = string(argv[optind++]); |
| |
| if (rectDesc.length()) { rectDesc += ' '; } |
| rectDesc += argNext; |
| |
| // Count number of opening <[ and matching >] |
| // At this point not worried about an opening character being |
| // matched by it's corresponding closing character. For example, |
| // "<1.0, 2.0]" is incorrect because the opening < should be matched |
| // with a closing >, instead of the closing ]. Such errors are |
| // detected when the actual value is parsed. |
| for (unsigned int n1 = 0; n1 < argNext.length(); n1++) { |
| switch(argNext[n1]) { |
| case '[': |
| case '<': |
| numOpen++; |
| break; |
| |
| case ']': |
| case '>': |
| numOpen--; |
| break; |
| } |
| |
| // Error anytime there is more closing then opening characters |
| if (numOpen < 0) { |
| testPrintI("Mismatched number of opening <[ with " |
| "closing >] in: %s", rectDesc.c_str()); |
| exit(4); |
| } |
| } |
| |
| // Description of a rectangle is complete when all opening |
| // <[ are closed with >] and the string ends with a comma or |
| // there are no more args. |
| if ((numOpen == 0) && rectDesc.length() |
| && ((rectDesc[rectDesc.length() - 1] == ',') |
| || (optind == argc))) { |
| // Remove trailing comma if it is present |
| if (rectDesc[rectDesc.length() - 1] == ',') { |
| rectDesc.erase(rectDesc.length() - 1); |
| } |
| |
| // Parse string description of rectangle |
| Rectangle rect = parseRect(rectDesc); |
| |
| // Add to the list of rectangles |
| rectangle.push_back(rect); |
| |
| // Prepare for description of another rectangle |
| rectDesc = string(""); |
| } |
| } |
| |
| // Create list of frames |
| hwc_layer_list_t *list; |
| list = hwcTestCreateLayerList(rectangle.size()); |
| if (list == NULL) { |
| testPrintE("hwcTestCreateLayerList failed"); |
| exit(5); |
| } |
| |
| hwc_layer_t *layer = &list->hwLayers[0]; |
| for (std::list<Rectangle>::iterator it = rectangle.begin(); |
| it != rectangle.end(); ++it, ++layer) { |
| layer->handle = it->texture->handle; |
| layer->blending = it->blend; |
| layer->transform = it->transform; |
| layer->sourceCrop = it->sourceCrop; |
| layer->displayFrame = it->displayFrame; |
| |
| layer->visibleRegionScreen.numRects = 1; |
| layer->visibleRegionScreen.rects = &layer->displayFrame; |
| } |
| |
| // Perform prepare operation |
| if (verbose) { testPrintI("Prepare:"); hwcTestDisplayList(list); } |
| hwcDevice->prepare(hwcDevice, list); |
| if (verbose) { |
| testPrintI("Post Prepare:"); |
| hwcTestDisplayListPrepareModifiable(list); |
| } |
| |
| // Turn off the geometry changed flag |
| list->flags &= ~HWC_GEOMETRY_CHANGED; |
| |
| // Perform the set operation(s) |
| if (verbose) {testPrintI("Set:"); } |
| if (verbose) { hwcTestDisplayListHandles(list); } |
| hwcDevice->set(hwcDevice, dpy, surface, list); |
| |
| testDelay(endDelay); |
| |
| // Start framework |
| rv = snprintf(cmd, sizeof(cmd), "%s", CMD_START_FRAMEWORK); |
| if (rv >= (signed) sizeof(cmd) - 1) { |
| testPrintE("Command too long for: %s", CMD_START_FRAMEWORK); |
| exit(6); |
| } |
| testExecCmd(cmd); |
| |
| return 0; |
| } |
| |
| // Parse string description of rectangle and add it to list of rectangles |
| // to be rendered. |
| static Rectangle parseRect(string rectStr) |
| { |
| int rv; |
| string str; |
| bool error; |
| istringstream in(rectStr); |
| const struct hwcTestGraphicFormat *format; |
| Rectangle rect; |
| struct hwc_rect hwcRect; |
| |
| // Graphic Format |
| in >> str; |
| if (!in) { |
| testPrintE("Error parsing format from: %s", rectStr.c_str()); |
| exit(20); |
| } |
| format = hwcTestGraphicFormatLookup(str.c_str()); |
| if (format == NULL) { |
| testPrintE("Unknown graphic format in: %s", rectStr.c_str()); |
| exit(21); |
| } |
| rect.format = format->format; |
| |
| // Display Frame |
| rect.displayFrame = hwcTestParseHwcRect(in, error); |
| if (error) { |
| testPrintE("Invalid display frame in: %s", rectStr.c_str()); |
| exit(22); |
| } |
| |
| // Set default sourceDim and sourceCrop based on size of display frame. |
| // Default is source size equal to the size of the display frame, with |
| // the source crop being the entire size of the source frame. |
| rect.sourceDim = HwcTestDim(rect.displayFrame.right |
| - rect.displayFrame.left, |
| rect.displayFrame.bottom |
| - rect.displayFrame.top); |
| rect.sourceCrop.left = 0; |
| rect.sourceCrop.top = 0; |
| rect.sourceCrop.right = rect.sourceDim.width(); |
| rect.sourceCrop.bottom = rect.sourceDim.height(); |
| |
| // Optional settings |
| while ((in.tellg() < (streampos) in.str().length()) |
| && (in.tellg() != (streampos) -1)) { |
| string attrName; |
| |
| in >> attrName; |
| if (in.eof()) { break; } |
| if (!in) { |
| testPrintE("Error reading attribute name in: %s", |
| rectStr.c_str()); |
| exit(23); |
| } |
| |
| // Transform |
| if (attrName == "transform:") { // Transform |
| string str; |
| |
| in >> str; |
| if (str == "none") { |
| rect.transform = 0; |
| } else if (str == "fliph") { |
| rect.transform = HWC_TRANSFORM_FLIP_H; |
| } else if (str == "flipv") { |
| rect.transform = HWC_TRANSFORM_FLIP_V; |
| } else if (str == "rot90") { |
| rect.transform = HWC_TRANSFORM_ROT_90; |
| } else if (str == "rot180") { |
| rect.transform = HWC_TRANSFORM_ROT_180; |
| } else if (str == "rot270") { |
| rect.transform = HWC_TRANSFORM_ROT_270; |
| } else { |
| testPrintE("Unknown transform of \"%s\" in: %s", str.c_str(), |
| rectStr.c_str()); |
| exit(24); |
| } |
| } else if (attrName == "blend:") { // Blend |
| string str; |
| |
| in >> str; |
| if (str == string("none")) { |
| rect.blend = HWC_BLENDING_NONE; |
| } else if (str == "premult") { |
| rect.blend = HWC_BLENDING_PREMULT; |
| } else if (str == "coverage") { |
| rect.blend = HWC_BLENDING_COVERAGE; |
| } else { |
| testPrintE("Unknown blend of \"%s\" in: %s", str.c_str(), |
| rectStr.c_str()); |
| exit(25); |
| } |
| } else if (attrName == "color:") { // Color |
| rect.color = hwcTestParseColor(in, error); |
| if (error) { |
| testPrintE("Error parsing color in: %s", rectStr.c_str()); |
| exit(26); |
| } |
| } else if (attrName == "alpha:") { // Alpha |
| in >> rect.alpha; |
| if (!in) { |
| testPrintE("Error parsing value for alpha attribute in: %s", |
| rectStr.c_str()); |
| exit(27); |
| } |
| } else if (attrName == "sourceDim:") { // Source Dimension |
| rect.sourceDim = hwcTestParseDim(in, error); |
| if (error) { |
| testPrintE("Error parsing source dimenision in: %s", |
| rectStr.c_str()); |
| exit(28); |
| } |
| } else if (attrName == "sourceCrop:") { // Source Crop |
| rect.sourceCrop = hwcTestParseHwcRect(in, error); |
| if (error) { |
| testPrintE("Error parsing source crop in: %s", |
| rectStr.c_str()); |
| exit(29); |
| } |
| } else { // Unknown attribute |
| testPrintE("Unknown attribute of \"%s\" in: %s", attrName.c_str(), |
| rectStr.c_str()); |
| exit(30); |
| } |
| } |
| |
| // Validate |
| if (((uint32_t) rect.sourceCrop.left >= rect.sourceDim.width()) |
| || ((uint32_t) rect.sourceCrop.right > rect.sourceDim.width()) |
| || ((uint32_t) rect.sourceCrop.top >= rect.sourceDim.height()) |
| || ((uint32_t) rect.sourceCrop.bottom > rect.sourceDim.height())) { |
| testPrintE("Invalid source crop in: %s", rectStr.c_str()); |
| exit(31); |
| } |
| if ((rect.displayFrame.left >= width) |
| || (rect.displayFrame.right > width) |
| || (rect.displayFrame.top >= height) |
| || (rect.displayFrame.bottom > height)) { |
| testPrintE("Invalid display frame in: %s", rectStr.c_str()); |
| exit(32); |
| } |
| if ((rect.alpha < 0.0) || (rect.alpha > 1.0)) { |
| testPrintE("Invalid alpha in: %s", rectStr.c_str()); |
| exit(33); |
| } |
| |
| // Create source texture |
| rect.texture = new GraphicBuffer(rect.sourceDim.width(), |
| rect.sourceDim.height(), |
| rect.format, texUsage); |
| if ((rv = rect.texture->initCheck()) != NO_ERROR) { |
| testPrintE("source texture initCheck failed, rv: %i", rv); |
| testPrintE(" %s", rectStr.c_str()); |
| |
| } |
| |
| // Fill with uniform color |
| hwcTestFillColor(rect.texture.get(), rect.color, rect.alpha); |
| if (verbose) { |
| testPrintI(" buf: %p handle: %p format: %s width: %u height: %u " |
| "color: %s alpha: %f", |
| rect.texture.get(), rect.texture->handle, format->desc, |
| rect.sourceDim.width(), rect.sourceDim.height(), |
| string(rect.color).c_str(), rect.alpha); |
| } |
| |
| return rect; |
| } |
| |
| void init(void) |
| { |
| // Seed pseudo random number generator |
| // Needed so that the pad areas of frames are filled with a deterministic |
| // pseudo random value. |
| srand48(0); |
| |
| hwcTestInitDisplay(verbose, &dpy, &surface, &width, &height); |
| |
| hwcTestOpenHwc(&hwcDevice); |
| } |
| |
| void printSyntax(const char *cmd) |
| { |
| testPrintE(" %s [options] (graphicFormat displayFrame [attributes],)...", |
| cmd); |
| testPrintE(" options:"); |
| testPrintE(" -D End of test delay"); |
| testPrintE(" -v Verbose"); |
| testPrintE(""); |
| testPrintE(" graphic formats:"); |
| for (unsigned int n1 = 0; n1 < NUMA(hwcTestGraphicFormat); n1++) { |
| testPrintE(" %s", hwcTestGraphicFormat[n1].desc); |
| } |
| testPrintE(""); |
| testPrintE(" displayFrame"); |
| testPrintE(" [left, top, right, bottom]"); |
| testPrintE(""); |
| testPrintE(" attributes:"); |
| testPrintE(" transform: none | fliph | flipv | rot90 | rot180 " |
| " | rot270"); |
| testPrintE(" blend: none | premult | coverage"); |
| testPrintE(" color: [0.##, 0.##, 0.##]"); |
| testPrintE(" alpha: 0.##"); |
| testPrintE(" sourceDim: [width, height]"); |
| testPrintE(" sourceCrop: [left, top, right, bottom]"); |
| testPrintE(""); |
| testPrintE(" Example:"); |
| testPrintE(" # White YV12 rectangle, with overlapping turquoise "); |
| testPrintE(" # RGBA8888 rectangle at 30%% (alpha: 0.7) transparency"); |
| testPrintE(" %s -v -D 30.0 \\", cmd); |
| testPrintE(" YV12 [50, 80, 200, 300] transform: none \\"); |
| testPrintE(" color: [1.0, 0.5, 0.5], \\"); |
| testPrintE(" RGBA8888 [100, 150, 300, 400] blend: coverage \\"); |
| testPrintE(" color: [0.251, 0.878, 0.816] alpha: 0.7 \\"); |
| testPrintE(" sourceDim: [50, 60] sourceCrop: [5, 8, 12, 15]"); |
| } |