| /* |
| * Copyright (C) 2019 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "Macros.h" |
| |
| #include "JoystickInputMapper.h" |
| |
| namespace android { |
| |
| JoystickInputMapper::JoystickInputMapper(InputDevice* device) : InputMapper(device) {} |
| |
| JoystickInputMapper::~JoystickInputMapper() {} |
| |
| uint32_t JoystickInputMapper::getSources() { |
| return AINPUT_SOURCE_JOYSTICK; |
| } |
| |
| void JoystickInputMapper::populateDeviceInfo(InputDeviceInfo* info) { |
| InputMapper::populateDeviceInfo(info); |
| |
| for (size_t i = 0; i < mAxes.size(); i++) { |
| const Axis& axis = mAxes.valueAt(i); |
| addMotionRange(axis.axisInfo.axis, axis, info); |
| |
| if (axis.axisInfo.mode == AxisInfo::MODE_SPLIT) { |
| addMotionRange(axis.axisInfo.highAxis, axis, info); |
| } |
| } |
| } |
| |
| void JoystickInputMapper::addMotionRange(int32_t axisId, const Axis& axis, InputDeviceInfo* info) { |
| info->addMotionRange(axisId, AINPUT_SOURCE_JOYSTICK, axis.min, axis.max, axis.flat, axis.fuzz, |
| axis.resolution); |
| /* In order to ease the transition for developers from using the old axes |
| * to the newer, more semantically correct axes, we'll continue to register |
| * the old axes as duplicates of their corresponding new ones. */ |
| int32_t compatAxis = getCompatAxis(axisId); |
| if (compatAxis >= 0) { |
| info->addMotionRange(compatAxis, AINPUT_SOURCE_JOYSTICK, axis.min, axis.max, axis.flat, |
| axis.fuzz, axis.resolution); |
| } |
| } |
| |
| /* A mapping from axes the joystick actually has to the axes that should be |
| * artificially created for compatibility purposes. |
| * Returns -1 if no compatibility axis is needed. */ |
| int32_t JoystickInputMapper::getCompatAxis(int32_t axis) { |
| switch (axis) { |
| case AMOTION_EVENT_AXIS_LTRIGGER: |
| return AMOTION_EVENT_AXIS_BRAKE; |
| case AMOTION_EVENT_AXIS_RTRIGGER: |
| return AMOTION_EVENT_AXIS_GAS; |
| } |
| return -1; |
| } |
| |
| void JoystickInputMapper::dump(std::string& dump) { |
| dump += INDENT2 "Joystick Input Mapper:\n"; |
| |
| dump += INDENT3 "Axes:\n"; |
| size_t numAxes = mAxes.size(); |
| for (size_t i = 0; i < numAxes; i++) { |
| const Axis& axis = mAxes.valueAt(i); |
| const char* label = getAxisLabel(axis.axisInfo.axis); |
| if (label) { |
| dump += StringPrintf(INDENT4 "%s", label); |
| } else { |
| dump += StringPrintf(INDENT4 "%d", axis.axisInfo.axis); |
| } |
| if (axis.axisInfo.mode == AxisInfo::MODE_SPLIT) { |
| label = getAxisLabel(axis.axisInfo.highAxis); |
| if (label) { |
| dump += StringPrintf(" / %s (split at %d)", label, axis.axisInfo.splitValue); |
| } else { |
| dump += StringPrintf(" / %d (split at %d)", axis.axisInfo.highAxis, |
| axis.axisInfo.splitValue); |
| } |
| } else if (axis.axisInfo.mode == AxisInfo::MODE_INVERT) { |
| dump += " (invert)"; |
| } |
| |
| dump += StringPrintf(": min=%0.5f, max=%0.5f, flat=%0.5f, fuzz=%0.5f, resolution=%0.5f\n", |
| axis.min, axis.max, axis.flat, axis.fuzz, axis.resolution); |
| dump += StringPrintf(INDENT4 " scale=%0.5f, offset=%0.5f, " |
| "highScale=%0.5f, highOffset=%0.5f\n", |
| axis.scale, axis.offset, axis.highScale, axis.highOffset); |
| dump += StringPrintf(INDENT4 " rawAxis=%d, rawMin=%d, rawMax=%d, " |
| "rawFlat=%d, rawFuzz=%d, rawResolution=%d\n", |
| mAxes.keyAt(i), axis.rawAxisInfo.minValue, axis.rawAxisInfo.maxValue, |
| axis.rawAxisInfo.flat, axis.rawAxisInfo.fuzz, |
| axis.rawAxisInfo.resolution); |
| } |
| } |
| |
| void JoystickInputMapper::configure(nsecs_t when, const InputReaderConfiguration* config, |
| uint32_t changes) { |
| InputMapper::configure(when, config, changes); |
| |
| if (!changes) { // first time only |
| // Collect all axes. |
| for (int32_t abs = 0; abs <= ABS_MAX; abs++) { |
| if (!(getAbsAxisUsage(abs, getDevice()->getClasses()) & INPUT_DEVICE_CLASS_JOYSTICK)) { |
| continue; // axis must be claimed by a different device |
| } |
| |
| RawAbsoluteAxisInfo rawAxisInfo; |
| getAbsoluteAxisInfo(abs, &rawAxisInfo); |
| if (rawAxisInfo.valid) { |
| // Map axis. |
| AxisInfo axisInfo; |
| bool explicitlyMapped = !getEventHub()->mapAxis(getDeviceId(), abs, &axisInfo); |
| if (!explicitlyMapped) { |
| // Axis is not explicitly mapped, will choose a generic axis later. |
| axisInfo.mode = AxisInfo::MODE_NORMAL; |
| axisInfo.axis = -1; |
| } |
| |
| // Apply flat override. |
| int32_t rawFlat = |
| axisInfo.flatOverride < 0 ? rawAxisInfo.flat : axisInfo.flatOverride; |
| |
| // Calculate scaling factors and limits. |
| Axis axis; |
| if (axisInfo.mode == AxisInfo::MODE_SPLIT) { |
| float scale = 1.0f / (axisInfo.splitValue - rawAxisInfo.minValue); |
| float highScale = 1.0f / (rawAxisInfo.maxValue - axisInfo.splitValue); |
| axis.initialize(rawAxisInfo, axisInfo, explicitlyMapped, scale, 0.0f, highScale, |
| 0.0f, 0.0f, 1.0f, rawFlat * scale, rawAxisInfo.fuzz * scale, |
| rawAxisInfo.resolution * scale); |
| } else if (isCenteredAxis(axisInfo.axis)) { |
| float scale = 2.0f / (rawAxisInfo.maxValue - rawAxisInfo.minValue); |
| float offset = avg(rawAxisInfo.minValue, rawAxisInfo.maxValue) * -scale; |
| axis.initialize(rawAxisInfo, axisInfo, explicitlyMapped, scale, offset, scale, |
| offset, -1.0f, 1.0f, rawFlat * scale, rawAxisInfo.fuzz * scale, |
| rawAxisInfo.resolution * scale); |
| } else { |
| float scale = 1.0f / (rawAxisInfo.maxValue - rawAxisInfo.minValue); |
| axis.initialize(rawAxisInfo, axisInfo, explicitlyMapped, scale, 0.0f, scale, |
| 0.0f, 0.0f, 1.0f, rawFlat * scale, rawAxisInfo.fuzz * scale, |
| rawAxisInfo.resolution * scale); |
| } |
| |
| // To eliminate noise while the joystick is at rest, filter out small variations |
| // in axis values up front. |
| axis.filter = axis.fuzz ? axis.fuzz : axis.flat * 0.25f; |
| |
| mAxes.add(abs, axis); |
| } |
| } |
| |
| // If there are too many axes, start dropping them. |
| // Prefer to keep explicitly mapped axes. |
| if (mAxes.size() > PointerCoords::MAX_AXES) { |
| ALOGI("Joystick '%s' has %zu axes but the framework only supports a maximum of %d.", |
| getDeviceName().c_str(), mAxes.size(), PointerCoords::MAX_AXES); |
| pruneAxes(true); |
| pruneAxes(false); |
| } |
| |
| // Assign generic axis ids to remaining axes. |
| int32_t nextGenericAxisId = AMOTION_EVENT_AXIS_GENERIC_1; |
| size_t numAxes = mAxes.size(); |
| for (size_t i = 0; i < numAxes; i++) { |
| Axis& axis = mAxes.editValueAt(i); |
| if (axis.axisInfo.axis < 0) { |
| while (nextGenericAxisId <= AMOTION_EVENT_AXIS_GENERIC_16 && |
| haveAxis(nextGenericAxisId)) { |
| nextGenericAxisId += 1; |
| } |
| |
| if (nextGenericAxisId <= AMOTION_EVENT_AXIS_GENERIC_16) { |
| axis.axisInfo.axis = nextGenericAxisId; |
| nextGenericAxisId += 1; |
| } else { |
| ALOGI("Ignoring joystick '%s' axis %d because all of the generic axis ids " |
| "have already been assigned to other axes.", |
| getDeviceName().c_str(), mAxes.keyAt(i)); |
| mAxes.removeItemsAt(i--); |
| numAxes -= 1; |
| } |
| } |
| } |
| } |
| } |
| |
| bool JoystickInputMapper::haveAxis(int32_t axisId) { |
| size_t numAxes = mAxes.size(); |
| for (size_t i = 0; i < numAxes; i++) { |
| const Axis& axis = mAxes.valueAt(i); |
| if (axis.axisInfo.axis == axisId || |
| (axis.axisInfo.mode == AxisInfo::MODE_SPLIT && axis.axisInfo.highAxis == axisId)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| void JoystickInputMapper::pruneAxes(bool ignoreExplicitlyMappedAxes) { |
| size_t i = mAxes.size(); |
| while (mAxes.size() > PointerCoords::MAX_AXES && i-- > 0) { |
| if (ignoreExplicitlyMappedAxes && mAxes.valueAt(i).explicitlyMapped) { |
| continue; |
| } |
| ALOGI("Discarding joystick '%s' axis %d because there are too many axes.", |
| getDeviceName().c_str(), mAxes.keyAt(i)); |
| mAxes.removeItemsAt(i); |
| } |
| } |
| |
| bool JoystickInputMapper::isCenteredAxis(int32_t axis) { |
| switch (axis) { |
| case AMOTION_EVENT_AXIS_X: |
| case AMOTION_EVENT_AXIS_Y: |
| case AMOTION_EVENT_AXIS_Z: |
| case AMOTION_EVENT_AXIS_RX: |
| case AMOTION_EVENT_AXIS_RY: |
| case AMOTION_EVENT_AXIS_RZ: |
| case AMOTION_EVENT_AXIS_HAT_X: |
| case AMOTION_EVENT_AXIS_HAT_Y: |
| case AMOTION_EVENT_AXIS_ORIENTATION: |
| case AMOTION_EVENT_AXIS_RUDDER: |
| case AMOTION_EVENT_AXIS_WHEEL: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| void JoystickInputMapper::reset(nsecs_t when) { |
| // Recenter all axes. |
| size_t numAxes = mAxes.size(); |
| for (size_t i = 0; i < numAxes; i++) { |
| Axis& axis = mAxes.editValueAt(i); |
| axis.resetValue(); |
| } |
| |
| InputMapper::reset(when); |
| } |
| |
| void JoystickInputMapper::process(const RawEvent* rawEvent) { |
| switch (rawEvent->type) { |
| case EV_ABS: { |
| ssize_t index = mAxes.indexOfKey(rawEvent->code); |
| if (index >= 0) { |
| Axis& axis = mAxes.editValueAt(index); |
| float newValue, highNewValue; |
| switch (axis.axisInfo.mode) { |
| case AxisInfo::MODE_INVERT: |
| newValue = (axis.rawAxisInfo.maxValue - rawEvent->value) * axis.scale + |
| axis.offset; |
| highNewValue = 0.0f; |
| break; |
| case AxisInfo::MODE_SPLIT: |
| if (rawEvent->value < axis.axisInfo.splitValue) { |
| newValue = (axis.axisInfo.splitValue - rawEvent->value) * axis.scale + |
| axis.offset; |
| highNewValue = 0.0f; |
| } else if (rawEvent->value > axis.axisInfo.splitValue) { |
| newValue = 0.0f; |
| highNewValue = |
| (rawEvent->value - axis.axisInfo.splitValue) * axis.highScale + |
| axis.highOffset; |
| } else { |
| newValue = 0.0f; |
| highNewValue = 0.0f; |
| } |
| break; |
| default: |
| newValue = rawEvent->value * axis.scale + axis.offset; |
| highNewValue = 0.0f; |
| break; |
| } |
| axis.newValue = newValue; |
| axis.highNewValue = highNewValue; |
| } |
| break; |
| } |
| |
| case EV_SYN: |
| switch (rawEvent->code) { |
| case SYN_REPORT: |
| sync(rawEvent->when, false /*force*/); |
| break; |
| } |
| break; |
| } |
| } |
| |
| void JoystickInputMapper::sync(nsecs_t when, bool force) { |
| if (!filterAxes(force)) { |
| return; |
| } |
| |
| int32_t metaState = mContext->getGlobalMetaState(); |
| int32_t buttonState = 0; |
| |
| PointerProperties pointerProperties; |
| pointerProperties.clear(); |
| pointerProperties.id = 0; |
| pointerProperties.toolType = AMOTION_EVENT_TOOL_TYPE_UNKNOWN; |
| |
| PointerCoords pointerCoords; |
| pointerCoords.clear(); |
| |
| size_t numAxes = mAxes.size(); |
| for (size_t i = 0; i < numAxes; i++) { |
| const Axis& axis = mAxes.valueAt(i); |
| setPointerCoordsAxisValue(&pointerCoords, axis.axisInfo.axis, axis.currentValue); |
| if (axis.axisInfo.mode == AxisInfo::MODE_SPLIT) { |
| setPointerCoordsAxisValue(&pointerCoords, axis.axisInfo.highAxis, |
| axis.highCurrentValue); |
| } |
| } |
| |
| // Moving a joystick axis should not wake the device because joysticks can |
| // be fairly noisy even when not in use. On the other hand, pushing a gamepad |
| // button will likely wake the device. |
| // TODO: Use the input device configuration to control this behavior more finely. |
| uint32_t policyFlags = 0; |
| |
| NotifyMotionArgs args(mContext->getNextSequenceNum(), when, getDeviceId(), |
| AINPUT_SOURCE_JOYSTICK, ADISPLAY_ID_NONE, policyFlags, |
| AMOTION_EVENT_ACTION_MOVE, 0, 0, metaState, buttonState, |
| MotionClassification::NONE, AMOTION_EVENT_EDGE_FLAG_NONE, 1, |
| &pointerProperties, &pointerCoords, 0, 0, |
| AMOTION_EVENT_INVALID_CURSOR_POSITION, |
| AMOTION_EVENT_INVALID_CURSOR_POSITION, 0, /* videoFrames */ {}); |
| getListener()->notifyMotion(&args); |
| } |
| |
| void JoystickInputMapper::setPointerCoordsAxisValue(PointerCoords* pointerCoords, int32_t axis, |
| float value) { |
| pointerCoords->setAxisValue(axis, value); |
| /* In order to ease the transition for developers from using the old axes |
| * to the newer, more semantically correct axes, we'll continue to produce |
| * values for the old axes as mirrors of the value of their corresponding |
| * new axes. */ |
| int32_t compatAxis = getCompatAxis(axis); |
| if (compatAxis >= 0) { |
| pointerCoords->setAxisValue(compatAxis, value); |
| } |
| } |
| |
| bool JoystickInputMapper::filterAxes(bool force) { |
| bool atLeastOneSignificantChange = force; |
| size_t numAxes = mAxes.size(); |
| for (size_t i = 0; i < numAxes; i++) { |
| Axis& axis = mAxes.editValueAt(i); |
| if (force || |
| hasValueChangedSignificantly(axis.filter, axis.newValue, axis.currentValue, axis.min, |
| axis.max)) { |
| axis.currentValue = axis.newValue; |
| atLeastOneSignificantChange = true; |
| } |
| if (axis.axisInfo.mode == AxisInfo::MODE_SPLIT) { |
| if (force || |
| hasValueChangedSignificantly(axis.filter, axis.highNewValue, axis.highCurrentValue, |
| axis.min, axis.max)) { |
| axis.highCurrentValue = axis.highNewValue; |
| atLeastOneSignificantChange = true; |
| } |
| } |
| } |
| return atLeastOneSignificantChange; |
| } |
| |
| bool JoystickInputMapper::hasValueChangedSignificantly(float filter, float newValue, |
| float currentValue, float min, float max) { |
| if (newValue != currentValue) { |
| // Filter out small changes in value unless the value is converging on the axis |
| // bounds or center point. This is intended to reduce the amount of information |
| // sent to applications by particularly noisy joysticks (such as PS3). |
| if (fabs(newValue - currentValue) > filter || |
| hasMovedNearerToValueWithinFilteredRange(filter, newValue, currentValue, min) || |
| hasMovedNearerToValueWithinFilteredRange(filter, newValue, currentValue, max) || |
| hasMovedNearerToValueWithinFilteredRange(filter, newValue, currentValue, 0)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool JoystickInputMapper::hasMovedNearerToValueWithinFilteredRange(float filter, float newValue, |
| float currentValue, |
| float thresholdValue) { |
| float newDistance = fabs(newValue - thresholdValue); |
| if (newDistance < filter) { |
| float oldDistance = fabs(currentValue - thresholdValue); |
| if (newDistance < oldDistance) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| } // namespace android |