|  | /* | 
|  | * Copyright (C) 2008 The Android Open Source Project | 
|  | * | 
|  | * Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | * you may not use this file except in compliance with the License. | 
|  | * You may obtain a copy of the License at | 
|  | * | 
|  | *      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | * | 
|  | * Unless required by applicable law or agreed to in writing, software | 
|  | * distributed under the License is distributed on an "AS IS" BASIS, | 
|  | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | * See the License for the specific language governing permissions and | 
|  | * limitations under the License. | 
|  | */ | 
|  |  | 
|  | #include <dirent.h> | 
|  | #include <errno.h> | 
|  | #include <fcntl.h> | 
|  | #include <limits.h> | 
|  | #include <poll.h> | 
|  | #include <signal.h> | 
|  | #include <stdarg.h> | 
|  | #include <stdio.h> | 
|  | #include <stdlib.h> | 
|  | #include <string> | 
|  | #include <string.h> | 
|  | #include <sys/capability.h> | 
|  | #include <sys/inotify.h> | 
|  | #include <sys/stat.h> | 
|  | #include <sys/time.h> | 
|  | #include <sys/wait.h> | 
|  | #include <sys/klog.h> | 
|  | #include <time.h> | 
|  | #include <unistd.h> | 
|  | #include <vector> | 
|  | #include <sys/prctl.h> | 
|  |  | 
|  | #define LOG_TAG "dumpstate" | 
|  |  | 
|  | #include <android-base/file.h> | 
|  | #include <cutils/debugger.h> | 
|  | #include <cutils/log.h> | 
|  | #include <cutils/properties.h> | 
|  | #include <cutils/sockets.h> | 
|  | #include <private/android_filesystem_config.h> | 
|  |  | 
|  | #include <selinux/android.h> | 
|  |  | 
|  | #include "dumpstate.h" | 
|  |  | 
|  | static const int64_t NANOS_PER_SEC = 1000000000; | 
|  |  | 
|  | /* list of native processes to include in the native dumps */ | 
|  | // This matches the /proc/pid/exe link instead of /proc/pid/cmdline. | 
|  | static const char* native_processes_to_dump[] = { | 
|  | "/system/bin/audioserver", | 
|  | "/system/bin/cameraserver", | 
|  | "/system/bin/drmserver", | 
|  | "/system/bin/mediacodec",     // media.codec | 
|  | "/system/bin/mediadrmserver", | 
|  | "/system/bin/mediaextractor", // media.extractor | 
|  | "/system/bin/mediaserver", | 
|  | "/system/bin/sdcard", | 
|  | "/system/bin/surfaceflinger", | 
|  | "/system/bin/vehicle_network_service", | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | DurationReporter::DurationReporter(const char *title) : DurationReporter(title, stdout) {} | 
|  |  | 
|  | DurationReporter::DurationReporter(const char *title, FILE *out) { | 
|  | title_ = title; | 
|  | if (title) { | 
|  | started_ = DurationReporter::nanotime(); | 
|  | } | 
|  | out_ = out; | 
|  | } | 
|  |  | 
|  | DurationReporter::~DurationReporter() { | 
|  | if (title_) { | 
|  | uint64_t elapsed = DurationReporter::nanotime() - started_; | 
|  | // Use "Yoda grammar" to make it easier to grep|sort sections. | 
|  | if (out_) { | 
|  | fprintf(out_, "------ %.3fs was the duration of '%s' ------\n", | 
|  | (float) elapsed / NANOS_PER_SEC, title_); | 
|  | } else { | 
|  | MYLOGD("Duration of '%s': %.3fs\n", title_, (float) elapsed / NANOS_PER_SEC); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | uint64_t DurationReporter::DurationReporter::nanotime() { | 
|  | struct timespec ts; | 
|  | clock_gettime(CLOCK_MONOTONIC, &ts); | 
|  | return (uint64_t) ts.tv_sec * NANOS_PER_SEC + ts.tv_nsec; | 
|  | } | 
|  |  | 
|  | void for_each_userid(void (*func)(int), const char *header) { | 
|  | ON_DRY_RUN_RETURN(); | 
|  | DIR *d; | 
|  | struct dirent *de; | 
|  |  | 
|  | if (header) printf("\n------ %s ------\n", header); | 
|  | func(0); | 
|  |  | 
|  | if (!(d = opendir("/data/system/users"))) { | 
|  | printf("Failed to open /data/system/users (%s)\n", strerror(errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | while ((de = readdir(d))) { | 
|  | int userid; | 
|  | if (de->d_type != DT_DIR || !(userid = atoi(de->d_name))) { | 
|  | continue; | 
|  | } | 
|  | func(userid); | 
|  | } | 
|  |  | 
|  | closedir(d); | 
|  | } | 
|  |  | 
|  | static void __for_each_pid(void (*helper)(int, const char *, void *), const char *header, void *arg) { | 
|  | DIR *d; | 
|  | struct dirent *de; | 
|  |  | 
|  | if (!(d = opendir("/proc"))) { | 
|  | printf("Failed to open /proc (%s)\n", strerror(errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (header) printf("\n------ %s ------\n", header); | 
|  | while ((de = readdir(d))) { | 
|  | int pid; | 
|  | int fd; | 
|  | char cmdpath[255]; | 
|  | char cmdline[255]; | 
|  |  | 
|  | if (!(pid = atoi(de->d_name))) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | memset(cmdline, 0, sizeof(cmdline)); | 
|  |  | 
|  | snprintf(cmdpath, sizeof(cmdpath), "/proc/%d/cmdline", pid); | 
|  | if ((fd = TEMP_FAILURE_RETRY(open(cmdpath, O_RDONLY | O_CLOEXEC))) >= 0) { | 
|  | TEMP_FAILURE_RETRY(read(fd, cmdline, sizeof(cmdline) - 2)); | 
|  | close(fd); | 
|  | if (cmdline[0]) { | 
|  | helper(pid, cmdline, arg); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | // if no cmdline, a kernel thread has comm | 
|  | snprintf(cmdpath, sizeof(cmdpath), "/proc/%d/comm", pid); | 
|  | if ((fd = TEMP_FAILURE_RETRY(open(cmdpath, O_RDONLY | O_CLOEXEC))) >= 0) { | 
|  | TEMP_FAILURE_RETRY(read(fd, cmdline + 1, sizeof(cmdline) - 4)); | 
|  | close(fd); | 
|  | if (cmdline[1]) { | 
|  | cmdline[0] = '['; | 
|  | size_t len = strcspn(cmdline, "\f\b\r\n"); | 
|  | cmdline[len] = ']'; | 
|  | cmdline[len+1] = '\0'; | 
|  | } | 
|  | } | 
|  | if (!cmdline[0]) { | 
|  | strcpy(cmdline, "N/A"); | 
|  | } | 
|  | helper(pid, cmdline, arg); | 
|  | } | 
|  |  | 
|  | closedir(d); | 
|  | } | 
|  |  | 
|  | static void for_each_pid_helper(int pid, const char *cmdline, void *arg) { | 
|  | for_each_pid_func *func = (for_each_pid_func*) arg; | 
|  | func(pid, cmdline); | 
|  | } | 
|  |  | 
|  | void for_each_pid(for_each_pid_func func, const char *header) { | 
|  | ON_DRY_RUN_RETURN(); | 
|  | __for_each_pid(for_each_pid_helper, header, (void *) func); | 
|  | } | 
|  |  | 
|  | static void for_each_tid_helper(int pid, const char *cmdline, void *arg) { | 
|  | DIR *d; | 
|  | struct dirent *de; | 
|  | char taskpath[255]; | 
|  | for_each_tid_func *func = (for_each_tid_func *) arg; | 
|  |  | 
|  | snprintf(taskpath, sizeof(taskpath), "/proc/%d/task", pid); | 
|  |  | 
|  | if (!(d = opendir(taskpath))) { | 
|  | printf("Failed to open %s (%s)\n", taskpath, strerror(errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | func(pid, pid, cmdline); | 
|  |  | 
|  | while ((de = readdir(d))) { | 
|  | int tid; | 
|  | int fd; | 
|  | char commpath[255]; | 
|  | char comm[255]; | 
|  |  | 
|  | if (!(tid = atoi(de->d_name))) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (tid == pid) | 
|  | continue; | 
|  |  | 
|  | snprintf(commpath, sizeof(commpath), "/proc/%d/comm", tid); | 
|  | memset(comm, 0, sizeof(comm)); | 
|  | if ((fd = TEMP_FAILURE_RETRY(open(commpath, O_RDONLY | O_CLOEXEC))) < 0) { | 
|  | strcpy(comm, "N/A"); | 
|  | } else { | 
|  | char *c; | 
|  | TEMP_FAILURE_RETRY(read(fd, comm, sizeof(comm) - 2)); | 
|  | close(fd); | 
|  |  | 
|  | c = strrchr(comm, '\n'); | 
|  | if (c) { | 
|  | *c = '\0'; | 
|  | } | 
|  | } | 
|  | func(pid, tid, comm); | 
|  | } | 
|  |  | 
|  | closedir(d); | 
|  | } | 
|  |  | 
|  | void for_each_tid(for_each_tid_func func, const char *header) { | 
|  | ON_DRY_RUN_RETURN(); | 
|  | __for_each_pid(for_each_tid_helper, header, (void *) func); | 
|  | } | 
|  |  | 
|  | void show_wchan(int pid, int tid, const char *name) { | 
|  | ON_DRY_RUN_RETURN(); | 
|  | char path[255]; | 
|  | char buffer[255]; | 
|  | int fd, ret, save_errno; | 
|  | char name_buffer[255]; | 
|  |  | 
|  | memset(buffer, 0, sizeof(buffer)); | 
|  |  | 
|  | snprintf(path, sizeof(path), "/proc/%d/wchan", tid); | 
|  | if ((fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_CLOEXEC))) < 0) { | 
|  | printf("Failed to open '%s' (%s)\n", path, strerror(errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ret = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); | 
|  | save_errno = errno; | 
|  | close(fd); | 
|  |  | 
|  | if (ret < 0) { | 
|  | printf("Failed to read '%s' (%s)\n", path, strerror(save_errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | snprintf(name_buffer, sizeof(name_buffer), "%*s%s", | 
|  | pid == tid ? 0 : 3, "", name); | 
|  |  | 
|  | printf("%-7d %-32s %s\n", tid, name_buffer, buffer); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | // print time in centiseconds | 
|  | static void snprcent(char *buffer, size_t len, size_t spc, | 
|  | unsigned long long time) { | 
|  | static long hz; // cache discovered hz | 
|  |  | 
|  | if (hz <= 0) { | 
|  | hz = sysconf(_SC_CLK_TCK); | 
|  | if (hz <= 0) { | 
|  | hz = 1000; | 
|  | } | 
|  | } | 
|  |  | 
|  | // convert to centiseconds | 
|  | time = (time * 100 + (hz / 2)) / hz; | 
|  |  | 
|  | char str[16]; | 
|  |  | 
|  | snprintf(str, sizeof(str), " %llu.%02u", | 
|  | time / 100, (unsigned)(time % 100)); | 
|  | size_t offset = strlen(buffer); | 
|  | snprintf(buffer + offset, (len > offset) ? len - offset : 0, | 
|  | "%*s", (spc > offset) ? (int)(spc - offset) : 0, str); | 
|  | } | 
|  |  | 
|  | // print permille as a percent | 
|  | static void snprdec(char *buffer, size_t len, size_t spc, unsigned permille) { | 
|  | char str[16]; | 
|  |  | 
|  | snprintf(str, sizeof(str), " %u.%u%%", permille / 10, permille % 10); | 
|  | size_t offset = strlen(buffer); | 
|  | snprintf(buffer + offset, (len > offset) ? len - offset : 0, | 
|  | "%*s", (spc > offset) ? (int)(spc - offset) : 0, str); | 
|  | } | 
|  |  | 
|  | void show_showtime(int pid, const char *name) { | 
|  | ON_DRY_RUN_RETURN(); | 
|  | char path[255]; | 
|  | char buffer[1023]; | 
|  | int fd, ret, save_errno; | 
|  |  | 
|  | memset(buffer, 0, sizeof(buffer)); | 
|  |  | 
|  | snprintf(path, sizeof(path), "/proc/%d/stat", pid); | 
|  | if ((fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_CLOEXEC))) < 0) { | 
|  | printf("Failed to open '%s' (%s)\n", path, strerror(errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ret = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); | 
|  | save_errno = errno; | 
|  | close(fd); | 
|  |  | 
|  | if (ret < 0) { | 
|  | printf("Failed to read '%s' (%s)\n", path, strerror(save_errno)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | // field 14 is utime | 
|  | // field 15 is stime | 
|  | // field 42 is iotime | 
|  | unsigned long long utime = 0, stime = 0, iotime = 0; | 
|  | if (sscanf(buffer, | 
|  | "%*u %*s %*s %*d %*d %*d %*d %*d %*d %*d %*d " | 
|  | "%*d %*d %llu %llu %*d %*d %*d %*d %*d %*d " | 
|  | "%*d %*d %*d %*d %*d %*d %*d %*d %*d %*d " | 
|  | "%*d %*d %*d %*d %*d %*d %*d %*d %*d %llu ", | 
|  | &utime, &stime, &iotime) != 3) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | unsigned long long total = utime + stime; | 
|  | if (!total) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | unsigned permille = (iotime * 1000 + (total / 2)) / total; | 
|  | if (permille > 1000) { | 
|  | permille = 1000; | 
|  | } | 
|  |  | 
|  | // try to beautify and stabilize columns at <80 characters | 
|  | snprintf(buffer, sizeof(buffer), "%-6d%s", pid, name); | 
|  | if ((name[0] != '[') || utime) { | 
|  | snprcent(buffer, sizeof(buffer), 57, utime); | 
|  | } | 
|  | snprcent(buffer, sizeof(buffer), 65, stime); | 
|  | if ((name[0] != '[') || iotime) { | 
|  | snprcent(buffer, sizeof(buffer), 73, iotime); | 
|  | } | 
|  | if (iotime) { | 
|  | snprdec(buffer, sizeof(buffer), 79, permille); | 
|  | } | 
|  | puts(buffer); // adds a trailing newline | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | void do_dmesg() { | 
|  | const char *title = "KERNEL LOG (dmesg)"; | 
|  | DurationReporter duration_reporter(title); | 
|  | printf("------ %s ------\n", title); | 
|  |  | 
|  | ON_DRY_RUN_RETURN(); | 
|  | /* Get size of kernel buffer */ | 
|  | int size = klogctl(KLOG_SIZE_BUFFER, NULL, 0); | 
|  | if (size <= 0) { | 
|  | printf("Unexpected klogctl return value: %d\n\n", size); | 
|  | return; | 
|  | } | 
|  | char *buf = (char *) malloc(size + 1); | 
|  | if (buf == NULL) { | 
|  | printf("memory allocation failed\n\n"); | 
|  | return; | 
|  | } | 
|  | int retval = klogctl(KLOG_READ_ALL, buf, size); | 
|  | if (retval < 0) { | 
|  | printf("klogctl failure\n\n"); | 
|  | free(buf); | 
|  | return; | 
|  | } | 
|  | buf[retval] = '\0'; | 
|  | printf("%s\n\n", buf); | 
|  | free(buf); | 
|  | return; | 
|  | } | 
|  |  | 
|  | void do_showmap(int pid, const char *name) { | 
|  | char title[255]; | 
|  | char arg[255]; | 
|  |  | 
|  | snprintf(title, sizeof(title), "SHOW MAP %d (%s)", pid, name); | 
|  | snprintf(arg, sizeof(arg), "%d", pid); | 
|  | run_command(title, 10, SU_PATH, "root", "showmap", "-q", arg, NULL); | 
|  | } | 
|  |  | 
|  | static int _dump_file_from_fd(const char *title, const char *path, int fd) { | 
|  | if (title) { | 
|  | printf("------ %s (%s", title, path); | 
|  |  | 
|  | struct stat st; | 
|  | // Only show the modification time of non-device files. | 
|  | size_t path_len = strlen(path); | 
|  | if ((path_len < 6 || memcmp(path, "/proc/", 6)) && | 
|  | (path_len < 5 || memcmp(path, "/sys/", 5)) && | 
|  | (path_len < 3 || memcmp(path, "/d/", 3)) && | 
|  | !fstat(fd, &st)) { | 
|  | char stamp[80]; | 
|  | time_t mtime = st.st_mtime; | 
|  | strftime(stamp, sizeof(stamp), "%Y-%m-%d %H:%M:%S", localtime(&mtime)); | 
|  | printf(": %s", stamp); | 
|  | } | 
|  | printf(") ------\n"); | 
|  | } | 
|  | ON_DRY_RUN({ update_progress(WEIGHT_FILE); close(fd); return 0; }); | 
|  |  | 
|  | bool newline = false; | 
|  | fd_set read_set; | 
|  | struct timeval tm; | 
|  | while (1) { | 
|  | FD_ZERO(&read_set); | 
|  | FD_SET(fd, &read_set); | 
|  | /* Timeout if no data is read for 30 seconds. */ | 
|  | tm.tv_sec = 30; | 
|  | tm.tv_usec = 0; | 
|  | uint64_t elapsed = DurationReporter::nanotime(); | 
|  | int ret = TEMP_FAILURE_RETRY(select(fd + 1, &read_set, NULL, NULL, &tm)); | 
|  | if (ret == -1) { | 
|  | printf("*** %s: select failed: %s\n", path, strerror(errno)); | 
|  | newline = true; | 
|  | break; | 
|  | } else if (ret == 0) { | 
|  | elapsed = DurationReporter::nanotime() - elapsed; | 
|  | printf("*** %s: Timed out after %.3fs\n", path, | 
|  | (float) elapsed / NANOS_PER_SEC); | 
|  | newline = true; | 
|  | break; | 
|  | } else { | 
|  | char buffer[65536]; | 
|  | ssize_t bytes_read = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); | 
|  | if (bytes_read > 0) { | 
|  | fwrite(buffer, bytes_read, 1, stdout); | 
|  | newline = (buffer[bytes_read-1] == '\n'); | 
|  | } else { | 
|  | if (bytes_read == -1) { | 
|  | printf("*** %s: Failed to read from fd: %s", path, strerror(errno)); | 
|  | newline = true; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | update_progress(WEIGHT_FILE); | 
|  | close(fd); | 
|  |  | 
|  | if (!newline) printf("\n"); | 
|  | if (title) printf("\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* prints the contents of a file */ | 
|  | int dump_file(const char *title, const char *path) { | 
|  | DurationReporter duration_reporter(title); | 
|  | int fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_NONBLOCK | O_CLOEXEC)); | 
|  | if (fd < 0) { | 
|  | int err = errno; | 
|  | printf("*** %s: %s\n", path, strerror(err)); | 
|  | if (title) printf("\n"); | 
|  | return -1; | 
|  | } | 
|  | return _dump_file_from_fd(title, path, fd); | 
|  | } | 
|  |  | 
|  | int read_file_as_long(const char *path, long int *output) { | 
|  | int fd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_NONBLOCK | O_CLOEXEC)); | 
|  | if (fd < 0) { | 
|  | int err = errno; | 
|  | MYLOGE("Error opening file descriptor for %s: %s\n", path, strerror(err)); | 
|  | return -1; | 
|  | } | 
|  | char buffer[50]; | 
|  | ssize_t bytes_read = TEMP_FAILURE_RETRY(read(fd, buffer, sizeof(buffer))); | 
|  | if (bytes_read == -1) { | 
|  | MYLOGE("Error reading file %s: %s\n", path, strerror(errno)); | 
|  | return -2; | 
|  | } | 
|  | if (bytes_read == 0) { | 
|  | MYLOGE("File %s is empty\n", path); | 
|  | return -3; | 
|  | } | 
|  | *output = atoi(buffer); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* calls skip to gate calling dump_from_fd recursively | 
|  | * in the specified directory. dump_from_fd defaults to | 
|  | * dump_file_from_fd above when set to NULL. skip defaults | 
|  | * to false when set to NULL. dump_from_fd will always be | 
|  | * called with title NULL. | 
|  | */ | 
|  | int dump_files(const char *title, const char *dir, | 
|  | bool (*skip)(const char *path), | 
|  | int (*dump_from_fd)(const char *title, const char *path, int fd)) { | 
|  | DurationReporter duration_reporter(title); | 
|  | DIR *dirp; | 
|  | struct dirent *d; | 
|  | char *newpath = NULL; | 
|  | const char *slash = "/"; | 
|  | int fd, retval = 0; | 
|  |  | 
|  | if (title) { | 
|  | printf("------ %s (%s) ------\n", title, dir); | 
|  | } | 
|  | ON_DRY_RUN_RETURN(0); | 
|  |  | 
|  | if (dir[strlen(dir) - 1] == '/') { | 
|  | ++slash; | 
|  | } | 
|  | dirp = opendir(dir); | 
|  | if (dirp == NULL) { | 
|  | retval = -errno; | 
|  | MYLOGE("%s: %s\n", dir, strerror(errno)); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | if (!dump_from_fd) { | 
|  | dump_from_fd = dump_file_from_fd; | 
|  | } | 
|  | for (; ((d = readdir(dirp))); free(newpath), newpath = NULL) { | 
|  | if ((d->d_name[0] == '.') | 
|  | && (((d->d_name[1] == '.') && (d->d_name[2] == '\0')) | 
|  | || (d->d_name[1] == '\0'))) { | 
|  | continue; | 
|  | } | 
|  | asprintf(&newpath, "%s%s%s%s", dir, slash, d->d_name, | 
|  | (d->d_type == DT_DIR) ? "/" : ""); | 
|  | if (!newpath) { | 
|  | retval = -errno; | 
|  | continue; | 
|  | } | 
|  | if (skip && (*skip)(newpath)) { | 
|  | continue; | 
|  | } | 
|  | if (d->d_type == DT_DIR) { | 
|  | int ret = dump_files(NULL, newpath, skip, dump_from_fd); | 
|  | if (ret < 0) { | 
|  | retval = ret; | 
|  | } | 
|  | continue; | 
|  | } | 
|  | fd = TEMP_FAILURE_RETRY(open(newpath, O_RDONLY | O_NONBLOCK | O_CLOEXEC)); | 
|  | if (fd < 0) { | 
|  | retval = fd; | 
|  | printf("*** %s: %s\n", newpath, strerror(errno)); | 
|  | continue; | 
|  | } | 
|  | (*dump_from_fd)(NULL, newpath, fd); | 
|  | } | 
|  | closedir(dirp); | 
|  | if (title) { | 
|  | printf("\n"); | 
|  | } | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /* fd must have been opened with the flag O_NONBLOCK. With this flag set, | 
|  | * it's possible to avoid issues where opening the file itself can get | 
|  | * stuck. | 
|  | */ | 
|  | int dump_file_from_fd(const char *title, const char *path, int fd) { | 
|  | ON_DRY_RUN_RETURN(0); | 
|  | int flags = fcntl(fd, F_GETFL); | 
|  | if (flags == -1) { | 
|  | printf("*** %s: failed to get flags on fd %d: %s\n", path, fd, strerror(errno)); | 
|  | close(fd); | 
|  | return -1; | 
|  | } else if (!(flags & O_NONBLOCK)) { | 
|  | printf("*** %s: fd must have O_NONBLOCK set.\n", path); | 
|  | close(fd); | 
|  | return -1; | 
|  | } | 
|  | return _dump_file_from_fd(title, path, fd); | 
|  | } | 
|  |  | 
|  | bool waitpid_with_timeout(pid_t pid, int timeout_seconds, int* status) { | 
|  | sigset_t child_mask, old_mask; | 
|  | sigemptyset(&child_mask); | 
|  | sigaddset(&child_mask, SIGCHLD); | 
|  |  | 
|  | if (sigprocmask(SIG_BLOCK, &child_mask, &old_mask) == -1) { | 
|  | printf("*** sigprocmask failed: %s\n", strerror(errno)); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | struct timespec ts; | 
|  | ts.tv_sec = timeout_seconds; | 
|  | ts.tv_nsec = 0; | 
|  | int ret = TEMP_FAILURE_RETRY(sigtimedwait(&child_mask, NULL, &ts)); | 
|  | int saved_errno = errno; | 
|  | // Set the signals back the way they were. | 
|  | if (sigprocmask(SIG_SETMASK, &old_mask, NULL) == -1) { | 
|  | printf("*** sigprocmask failed: %s\n", strerror(errno)); | 
|  | if (ret == 0) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  | if (ret == -1) { | 
|  | errno = saved_errno; | 
|  | if (errno == EAGAIN) { | 
|  | errno = ETIMEDOUT; | 
|  | } else { | 
|  | printf("*** sigtimedwait failed: %s\n", strerror(errno)); | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | pid_t child_pid = waitpid(pid, status, WNOHANG); | 
|  | if (child_pid != pid) { | 
|  | if (child_pid != -1) { | 
|  | printf("*** Waiting for pid %d, got pid %d instead\n", pid, child_pid); | 
|  | } else { | 
|  | printf("*** waitpid failed: %s\n", strerror(errno)); | 
|  | } | 
|  | return false; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | // TODO: refactor all those commands that convert args | 
|  | void format_args(const char* command, const char *args[], std::string *string); | 
|  |  | 
|  | int run_command(const char *title, int timeout_seconds, const char *command, ...) { | 
|  | DurationReporter duration_reporter(title); | 
|  | fflush(stdout); | 
|  |  | 
|  | const char *args[1024] = {command}; | 
|  | size_t arg; | 
|  | va_list ap; | 
|  | va_start(ap, command); | 
|  | if (title) printf("------ %s (%s", title, command); | 
|  | bool null_terminated = false; | 
|  | for (arg = 1; arg < sizeof(args) / sizeof(args[0]); ++arg) { | 
|  | args[arg] = va_arg(ap, const char *); | 
|  | if (args[arg] == nullptr) { | 
|  | null_terminated = true; | 
|  | break; | 
|  | } | 
|  | // TODO: null_terminated check is not really working; line below would crash dumpstate if | 
|  | // nullptr is missing | 
|  | if (title) printf(" %s", args[arg]); | 
|  | } | 
|  | if (title) printf(") ------\n"); | 
|  | fflush(stdout); | 
|  | if (!null_terminated) { | 
|  | // Fail now, otherwise execvp() call on run_command_always() might hang. | 
|  | std::string cmd; | 
|  | format_args(command, args, &cmd); | 
|  | MYLOGE("skipping command %s because its args were not NULL-terminated", cmd.c_str()); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | ON_DRY_RUN({ update_progress(timeout_seconds); va_end(ap); return 0; }); | 
|  |  | 
|  | int status = run_command_always(title, DONT_DROP_ROOT, NORMAL_STDOUT, timeout_seconds, args); | 
|  | va_end(ap); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | int run_command_as_shell(const char *title, int timeout_seconds, const char *command, ...) { | 
|  | DurationReporter duration_reporter(title); | 
|  | fflush(stdout); | 
|  |  | 
|  | const char *args[1024] = {command}; | 
|  | size_t arg; | 
|  | va_list ap; | 
|  | va_start(ap, command); | 
|  | if (title) printf("------ %s (%s", title, command); | 
|  | bool null_terminated = false; | 
|  | for (arg = 1; arg < sizeof(args) / sizeof(args[0]); ++arg) { | 
|  | args[arg] = va_arg(ap, const char *); | 
|  | if (args[arg] == nullptr) { | 
|  | null_terminated = true; | 
|  | break; | 
|  | } | 
|  | // TODO: null_terminated check is not really working; line below would crash dumpstate if | 
|  | // nullptr is missing | 
|  | if (title) printf(" %s", args[arg]); | 
|  | } | 
|  | if (title) printf(") ------\n"); | 
|  | fflush(stdout); | 
|  | if (!null_terminated) { | 
|  | // Fail now, otherwise execvp() call on run_command_always() might hang. | 
|  | std::string cmd; | 
|  | format_args(command, args, &cmd); | 
|  | MYLOGE("skipping command %s because its args were not NULL-terminated", cmd.c_str()); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | ON_DRY_RUN({ update_progress(timeout_seconds); va_end(ap); return 0; }); | 
|  |  | 
|  | int status = run_command_always(title, DROP_ROOT, NORMAL_STDOUT, timeout_seconds, args); | 
|  | va_end(ap); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /* forks a command and waits for it to finish */ | 
|  | int run_command_always(const char *title, RootMode root_mode, StdoutMode stdout_mode, | 
|  | int timeout_seconds, const char *args[]) { | 
|  | bool silent = (stdout_mode == REDIRECT_TO_STDERR); | 
|  | // TODO: need to check if args is null-terminated, otherwise execvp will crash dumpstate | 
|  |  | 
|  | /* TODO: for now we're simplifying the progress calculation by using the timeout as the weight. | 
|  | * It's a good approximation for most cases, except when calling dumpsys, where its weight | 
|  | * should be much higher proportionally to its timeout. */ | 
|  | int weight = timeout_seconds; | 
|  |  | 
|  | const char *command = args[0]; | 
|  | uint64_t start = DurationReporter::nanotime(); | 
|  | pid_t pid = fork(); | 
|  |  | 
|  | /* handle error case */ | 
|  | if (pid < 0) { | 
|  | if (!silent) printf("*** fork: %s\n", strerror(errno)); | 
|  | MYLOGE("*** fork: %s\n", strerror(errno)); | 
|  | return pid; | 
|  | } | 
|  |  | 
|  | /* handle child case */ | 
|  | if (pid == 0) { | 
|  | if (root_mode == DROP_ROOT && !drop_root_user()) { | 
|  | if (!silent) printf("*** fail todrop root before running %s: %s\n", command, | 
|  | strerror(errno)); | 
|  | MYLOGE("*** could not drop root before running %s: %s\n", command, strerror(errno)); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (silent) { | 
|  | // Redirect stderr to stdout | 
|  | dup2(STDERR_FILENO, STDOUT_FILENO); | 
|  | } | 
|  |  | 
|  | /* make sure the child dies when dumpstate dies */ | 
|  | prctl(PR_SET_PDEATHSIG, SIGKILL); | 
|  |  | 
|  | /* just ignore SIGPIPE, will go down with parent's */ | 
|  | struct sigaction sigact; | 
|  | memset(&sigact, 0, sizeof(sigact)); | 
|  | sigact.sa_handler = SIG_IGN; | 
|  | sigaction(SIGPIPE, &sigact, NULL); | 
|  |  | 
|  | execvp(command, (char**) args); | 
|  | // execvp's result will be handled after waitpid_with_timeout() below, but if it failed, | 
|  | // it's safer to exit dumpstate. | 
|  | MYLOGD("execvp on command '%s' failed (error: %s)", command, strerror(errno)); | 
|  | fflush(stdout); | 
|  | // Must call _exit (instead of exit), otherwise it will corrupt the zip file. | 
|  | _exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | /* handle parent case */ | 
|  | int status; | 
|  | bool ret = waitpid_with_timeout(pid, timeout_seconds, &status); | 
|  | uint64_t elapsed = DurationReporter::nanotime() - start; | 
|  | std::string cmd; // used to log command and its args | 
|  | if (!ret) { | 
|  | if (errno == ETIMEDOUT) { | 
|  | format_args(command, args, &cmd); | 
|  | if (!silent) printf("*** command '%s' timed out after %.3fs (killing pid %d)\n", | 
|  | cmd.c_str(), (float) elapsed / NANOS_PER_SEC, pid); | 
|  | MYLOGE("command '%s' timed out after %.3fs (killing pid %d)\n", cmd.c_str(), | 
|  | (float) elapsed / NANOS_PER_SEC, pid); | 
|  | } else { | 
|  | format_args(command, args, &cmd); | 
|  | if (!silent) printf("*** command '%s': Error after %.4fs (killing pid %d)\n", | 
|  | cmd.c_str(), (float) elapsed / NANOS_PER_SEC, pid); | 
|  | MYLOGE("command '%s': Error after %.4fs (killing pid %d)\n", cmd.c_str(), | 
|  | (float) elapsed / NANOS_PER_SEC, pid); | 
|  | } | 
|  | kill(pid, SIGTERM); | 
|  | if (!waitpid_with_timeout(pid, 5, NULL)) { | 
|  | kill(pid, SIGKILL); | 
|  | if (!waitpid_with_timeout(pid, 5, NULL)) { | 
|  | if (!silent) printf("could not kill command '%s' (pid %d) even with SIGKILL.\n", | 
|  | command, pid); | 
|  | MYLOGE("could not kill command '%s' (pid %d) even with SIGKILL.\n", command, pid); | 
|  | } | 
|  | } | 
|  | return -1; | 
|  | } else if (status) { | 
|  | format_args(command, args, &cmd); | 
|  | if (!silent) printf("*** command '%s' failed: %s\n", cmd.c_str(), strerror(errno)); | 
|  | MYLOGE("command '%s' failed: %s\n", cmd.c_str(), strerror(errno)); | 
|  | return -2; | 
|  | } | 
|  |  | 
|  | if (WIFSIGNALED(status)) { | 
|  | if (!silent) printf("*** %s: Killed by signal %d\n", command, WTERMSIG(status)); | 
|  | MYLOGE("*** %s: Killed by signal %d\n", command, WTERMSIG(status)); | 
|  | } else if (WIFEXITED(status) && WEXITSTATUS(status) > 0) { | 
|  | if (!silent) printf("*** %s: Exit code %d\n", command, WEXITSTATUS(status)); | 
|  | MYLOGE("*** %s: Exit code %d\n", command, WEXITSTATUS(status)); | 
|  | } | 
|  |  | 
|  | if (weight > 0) { | 
|  | update_progress(weight); | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | bool drop_root_user() { | 
|  | if (getgid() == AID_SHELL && getuid() == AID_SHELL) { | 
|  | MYLOGD("drop_root_user(): already running as Shell"); | 
|  | return true; | 
|  | } | 
|  | /* ensure we will keep capabilities when we drop root */ | 
|  | if (prctl(PR_SET_KEEPCAPS, 1) < 0) { | 
|  | MYLOGE("prctl(PR_SET_KEEPCAPS) failed: %s\n", strerror(errno)); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | gid_t groups[] = { AID_LOG, AID_SDCARD_R, AID_SDCARD_RW, | 
|  | AID_MOUNT, AID_INET, AID_NET_BW_STATS, AID_READPROC }; | 
|  | if (setgroups(sizeof(groups)/sizeof(groups[0]), groups) != 0) { | 
|  | MYLOGE("Unable to setgroups, aborting: %s\n", strerror(errno)); | 
|  | return false; | 
|  | } | 
|  | if (setgid(AID_SHELL) != 0) { | 
|  | MYLOGE("Unable to setgid, aborting: %s\n", strerror(errno)); | 
|  | return false; | 
|  | } | 
|  | if (setuid(AID_SHELL) != 0) { | 
|  | MYLOGE("Unable to setuid, aborting: %s\n", strerror(errno)); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | struct __user_cap_header_struct capheader; | 
|  | struct __user_cap_data_struct capdata[2]; | 
|  | memset(&capheader, 0, sizeof(capheader)); | 
|  | memset(&capdata, 0, sizeof(capdata)); | 
|  | capheader.version = _LINUX_CAPABILITY_VERSION_3; | 
|  | capheader.pid = 0; | 
|  |  | 
|  | capdata[CAP_TO_INDEX(CAP_SYSLOG)].permitted = CAP_TO_MASK(CAP_SYSLOG); | 
|  | capdata[CAP_TO_INDEX(CAP_SYSLOG)].effective = CAP_TO_MASK(CAP_SYSLOG); | 
|  | capdata[0].inheritable = 0; | 
|  | capdata[1].inheritable = 0; | 
|  |  | 
|  | if (capset(&capheader, &capdata[0]) < 0) { | 
|  | MYLOGE("capset failed: %s\n", strerror(errno)); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | void send_broadcast(const std::string& action, const std::vector<std::string>& args) { | 
|  | if (args.size() > 1000) { | 
|  | MYLOGE("send_broadcast: too many arguments (%d)\n", (int) args.size()); | 
|  | return; | 
|  | } | 
|  | const char *am_args[1024] = { "/system/bin/am", "broadcast", "--user", "0", "-a", | 
|  | action.c_str() }; | 
|  | size_t am_index = 5; // Starts at the index of last initial value above. | 
|  | for (const std::string& arg : args) { | 
|  | am_args[++am_index] = arg.c_str(); | 
|  | } | 
|  | // Always terminate with NULL. | 
|  | am_args[am_index + 1] = NULL; | 
|  | std::string args_string; | 
|  | format_args(am_index + 1, am_args, &args_string); | 
|  | MYLOGD("send_broadcast command: %s\n", args_string.c_str()); | 
|  | run_command_always(NULL, DROP_ROOT, REDIRECT_TO_STDERR, 20, am_args); | 
|  | } | 
|  |  | 
|  | size_t num_props = 0; | 
|  | static char* props[2000]; | 
|  |  | 
|  | static void print_prop(const char *key, const char *name, void *user) { | 
|  | (void) user; | 
|  | if (num_props < sizeof(props) / sizeof(props[0])) { | 
|  | char buf[PROPERTY_KEY_MAX + PROPERTY_VALUE_MAX + 10]; | 
|  | snprintf(buf, sizeof(buf), "[%s]: [%s]\n", key, name); | 
|  | props[num_props++] = strdup(buf); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int compare_prop(const void *a, const void *b) { | 
|  | return strcmp(*(char * const *) a, *(char * const *) b); | 
|  | } | 
|  |  | 
|  | /* prints all the system properties */ | 
|  | void print_properties() { | 
|  | const char* title = "SYSTEM PROPERTIES"; | 
|  | DurationReporter duration_reporter(title); | 
|  | printf("------ %s ------\n", title); | 
|  | ON_DRY_RUN_RETURN(); | 
|  | size_t i; | 
|  | num_props = 0; | 
|  | property_list(print_prop, NULL); | 
|  | qsort(&props, num_props, sizeof(props[0]), compare_prop); | 
|  |  | 
|  | for (i = 0; i < num_props; ++i) { | 
|  | fputs(props[i], stdout); | 
|  | free(props[i]); | 
|  | } | 
|  | printf("\n"); | 
|  | } | 
|  |  | 
|  | int open_socket(const char *service) { | 
|  | int s = android_get_control_socket(service); | 
|  | if (s < 0) { | 
|  | MYLOGE("android_get_control_socket(%s): %s\n", service, strerror(errno)); | 
|  | exit(1); | 
|  | } | 
|  | fcntl(s, F_SETFD, FD_CLOEXEC); | 
|  | if (listen(s, 4) < 0) { | 
|  | MYLOGE("listen(control socket): %s\n", strerror(errno)); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | struct sockaddr addr; | 
|  | socklen_t alen = sizeof(addr); | 
|  | int fd = accept(s, &addr, &alen); | 
|  | if (fd < 0) { | 
|  | MYLOGE("accept(control socket): %s\n", strerror(errno)); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | /* redirect output to a service control socket */ | 
|  | void redirect_to_socket(FILE *redirect, const char *service) { | 
|  | int fd = open_socket(service); | 
|  | fflush(redirect); | 
|  | dup2(fd, fileno(redirect)); | 
|  | close(fd); | 
|  | } | 
|  |  | 
|  | // TODO: should call is_valid_output_file and/or be merged into it. | 
|  | void create_parent_dirs(const char *path) { | 
|  | char *chp = const_cast<char *> (path); | 
|  |  | 
|  | /* skip initial slash */ | 
|  | if (chp[0] == '/') | 
|  | chp++; | 
|  |  | 
|  | /* create leading directories, if necessary */ | 
|  | struct stat dir_stat; | 
|  | while (chp && chp[0]) { | 
|  | chp = strchr(chp, '/'); | 
|  | if (chp) { | 
|  | *chp = 0; | 
|  | if (stat(path, &dir_stat) == -1 || !S_ISDIR(dir_stat.st_mode)) { | 
|  | MYLOGI("Creating directory %s\n", path); | 
|  | if (mkdir(path, 0770)) { /* drwxrwx--- */ | 
|  | MYLOGE("Unable to create directory %s: %s\n", path, strerror(errno)); | 
|  | } else if (chown(path, AID_SHELL, AID_SHELL)) { | 
|  | MYLOGE("Unable to change ownership of dir %s: %s\n", path, strerror(errno)); | 
|  | } | 
|  | } | 
|  | *chp++ = '/'; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* redirect output to a file */ | 
|  | void redirect_to_file(FILE *redirect, char *path) { | 
|  | create_parent_dirs(path); | 
|  |  | 
|  | int fd = TEMP_FAILURE_RETRY(open(path, O_WRONLY | O_CREAT | O_TRUNC | O_CLOEXEC | O_NOFOLLOW, | 
|  | S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)); | 
|  | if (fd < 0) { | 
|  | MYLOGE("%s: %s\n", path, strerror(errno)); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | TEMP_FAILURE_RETRY(dup2(fd, fileno(redirect))); | 
|  | close(fd); | 
|  | } | 
|  |  | 
|  | static bool should_dump_native_traces(const char* path) { | 
|  | for (const char** p = native_processes_to_dump; *p; p++) { | 
|  | if (!strcmp(*p, path)) { | 
|  | return true; | 
|  | } | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* dump Dalvik and native stack traces, return the trace file location (NULL if none) */ | 
|  | const char *dump_traces() { | 
|  | DurationReporter duration_reporter("DUMP TRACES", NULL); | 
|  | ON_DRY_RUN_RETURN(NULL); | 
|  | const char* result = NULL; | 
|  |  | 
|  | char traces_path[PROPERTY_VALUE_MAX] = ""; | 
|  | property_get("dalvik.vm.stack-trace-file", traces_path, ""); | 
|  | if (!traces_path[0]) return NULL; | 
|  |  | 
|  | /* move the old traces.txt (if any) out of the way temporarily */ | 
|  | char anr_traces_path[PATH_MAX]; | 
|  | strlcpy(anr_traces_path, traces_path, sizeof(anr_traces_path)); | 
|  | strlcat(anr_traces_path, ".anr", sizeof(anr_traces_path)); | 
|  | if (rename(traces_path, anr_traces_path) && errno != ENOENT) { | 
|  | MYLOGE("rename(%s, %s): %s\n", traces_path, anr_traces_path, strerror(errno)); | 
|  | return NULL;  // Can't rename old traces.txt -- no permission? -- leave it alone instead | 
|  | } | 
|  |  | 
|  | /* create a new, empty traces.txt file to receive stack dumps */ | 
|  | int fd = TEMP_FAILURE_RETRY(open(traces_path, O_CREAT | O_WRONLY | O_TRUNC | O_NOFOLLOW | O_CLOEXEC, | 
|  | 0666));  /* -rw-rw-rw- */ | 
|  | if (fd < 0) { | 
|  | MYLOGE("%s: %s\n", traces_path, strerror(errno)); | 
|  | return NULL; | 
|  | } | 
|  | int chmod_ret = fchmod(fd, 0666); | 
|  | if (chmod_ret < 0) { | 
|  | MYLOGE("fchmod on %s failed: %s\n", traces_path, strerror(errno)); | 
|  | close(fd); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Variables below must be initialized before 'goto' statements */ | 
|  | int dalvik_found = 0; | 
|  | int ifd, wfd = -1; | 
|  |  | 
|  | /* walk /proc and kill -QUIT all Dalvik processes */ | 
|  | DIR *proc = opendir("/proc"); | 
|  | if (proc == NULL) { | 
|  | MYLOGE("/proc: %s\n", strerror(errno)); | 
|  | goto error_close_fd; | 
|  | } | 
|  |  | 
|  | /* use inotify to find when processes are done dumping */ | 
|  | ifd = inotify_init(); | 
|  | if (ifd < 0) { | 
|  | MYLOGE("inotify_init: %s\n", strerror(errno)); | 
|  | goto error_close_fd; | 
|  | } | 
|  |  | 
|  | wfd = inotify_add_watch(ifd, traces_path, IN_CLOSE_WRITE); | 
|  | if (wfd < 0) { | 
|  | MYLOGE("inotify_add_watch(%s): %s\n", traces_path, strerror(errno)); | 
|  | goto error_close_ifd; | 
|  | } | 
|  |  | 
|  | struct dirent *d; | 
|  | while ((d = readdir(proc))) { | 
|  | int pid = atoi(d->d_name); | 
|  | if (pid <= 0) continue; | 
|  |  | 
|  | char path[PATH_MAX]; | 
|  | char data[PATH_MAX]; | 
|  | snprintf(path, sizeof(path), "/proc/%d/exe", pid); | 
|  | ssize_t len = readlink(path, data, sizeof(data) - 1); | 
|  | if (len <= 0) { | 
|  | continue; | 
|  | } | 
|  | data[len] = '\0'; | 
|  |  | 
|  | if (!strncmp(data, "/system/bin/app_process", strlen("/system/bin/app_process"))) { | 
|  | /* skip zygote -- it won't dump its stack anyway */ | 
|  | snprintf(path, sizeof(path), "/proc/%d/cmdline", pid); | 
|  | int cfd = TEMP_FAILURE_RETRY(open(path, O_RDONLY | O_CLOEXEC)); | 
|  | len = read(cfd, data, sizeof(data) - 1); | 
|  | close(cfd); | 
|  | if (len <= 0) { | 
|  | continue; | 
|  | } | 
|  | data[len] = '\0'; | 
|  | if (!strncmp(data, "zygote", strlen("zygote"))) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ++dalvik_found; | 
|  | uint64_t start = DurationReporter::nanotime(); | 
|  | if (kill(pid, SIGQUIT)) { | 
|  | MYLOGE("kill(%d, SIGQUIT): %s\n", pid, strerror(errno)); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* wait for the writable-close notification from inotify */ | 
|  | struct pollfd pfd = { ifd, POLLIN, 0 }; | 
|  | int ret = poll(&pfd, 1, 5000);  /* 5 sec timeout */ | 
|  | if (ret < 0) { | 
|  | MYLOGE("poll: %s\n", strerror(errno)); | 
|  | } else if (ret == 0) { | 
|  | MYLOGE("warning: timed out dumping pid %d\n", pid); | 
|  | } else { | 
|  | struct inotify_event ie; | 
|  | read(ifd, &ie, sizeof(ie)); | 
|  | } | 
|  |  | 
|  | if (lseek(fd, 0, SEEK_END) < 0) { | 
|  | MYLOGE("lseek: %s\n", strerror(errno)); | 
|  | } else { | 
|  | dprintf(fd, "[dump dalvik stack %d: %.3fs elapsed]\n", | 
|  | pid, (float)(DurationReporter::nanotime() - start) / NANOS_PER_SEC); | 
|  | } | 
|  | } else if (should_dump_native_traces(data)) { | 
|  | /* dump native process if appropriate */ | 
|  | if (lseek(fd, 0, SEEK_END) < 0) { | 
|  | MYLOGE("lseek: %s\n", strerror(errno)); | 
|  | } else { | 
|  | static uint16_t timeout_failures = 0; | 
|  | uint64_t start = DurationReporter::nanotime(); | 
|  |  | 
|  | /* If 3 backtrace dumps fail in a row, consider debuggerd dead. */ | 
|  | if (timeout_failures == 3) { | 
|  | dprintf(fd, "too many stack dump failures, skipping...\n"); | 
|  | } else if (dump_backtrace_to_file_timeout(pid, fd, 20) == -1) { | 
|  | dprintf(fd, "dumping failed, likely due to a timeout\n"); | 
|  | timeout_failures++; | 
|  | } else { | 
|  | timeout_failures = 0; | 
|  | } | 
|  | dprintf(fd, "[dump native stack %d: %.3fs elapsed]\n", | 
|  | pid, (float)(DurationReporter::nanotime() - start) / NANOS_PER_SEC); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (dalvik_found == 0) { | 
|  | MYLOGE("Warning: no Dalvik processes found to dump stacks\n"); | 
|  | } | 
|  |  | 
|  | static char dump_traces_path[PATH_MAX]; | 
|  | strlcpy(dump_traces_path, traces_path, sizeof(dump_traces_path)); | 
|  | strlcat(dump_traces_path, ".bugreport", sizeof(dump_traces_path)); | 
|  | if (rename(traces_path, dump_traces_path)) { | 
|  | MYLOGE("rename(%s, %s): %s\n", traces_path, dump_traces_path, strerror(errno)); | 
|  | goto error_close_ifd; | 
|  | } | 
|  | result = dump_traces_path; | 
|  |  | 
|  | /* replace the saved [ANR] traces.txt file */ | 
|  | rename(anr_traces_path, traces_path); | 
|  |  | 
|  | error_close_ifd: | 
|  | close(ifd); | 
|  | error_close_fd: | 
|  | close(fd); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | void dump_route_tables() { | 
|  | DurationReporter duration_reporter("DUMP ROUTE TABLES"); | 
|  | ON_DRY_RUN_RETURN(); | 
|  | const char* const RT_TABLES_PATH = "/data/misc/net/rt_tables"; | 
|  | dump_file("RT_TABLES", RT_TABLES_PATH); | 
|  | FILE* fp = fopen(RT_TABLES_PATH, "re"); | 
|  | if (!fp) { | 
|  | printf("*** %s: %s\n", RT_TABLES_PATH, strerror(errno)); | 
|  | return; | 
|  | } | 
|  | char table[16]; | 
|  | // Each line has an integer (the table number), a space, and a string (the table name). We only | 
|  | // need the table number. It's a 32-bit unsigned number, so max 10 chars. Skip the table name. | 
|  | // Add a fixed max limit so this doesn't go awry. | 
|  | for (int i = 0; i < 64 && fscanf(fp, " %10s %*s", table) == 1; ++i) { | 
|  | run_command("ROUTE TABLE IPv4", 10, "ip", "-4", "route", "show", "table", table, NULL); | 
|  | run_command("ROUTE TABLE IPv6", 10, "ip", "-6", "route", "show", "table", table, NULL); | 
|  | } | 
|  | fclose(fp); | 
|  | } | 
|  |  | 
|  | /* overall progress */ | 
|  | int progress = 0; | 
|  | int do_update_progress = 0; // Set by dumpstate.cpp | 
|  | int weight_total = WEIGHT_TOTAL; | 
|  |  | 
|  | // TODO: make this function thread safe if sections are generated in parallel. | 
|  | void update_progress(int delta) { | 
|  | if (!do_update_progress) return; | 
|  |  | 
|  | progress += delta; | 
|  |  | 
|  | char key[PROPERTY_KEY_MAX]; | 
|  | char value[PROPERTY_VALUE_MAX]; | 
|  |  | 
|  | // adjusts max on the fly | 
|  | if (progress > weight_total) { | 
|  | int new_total = weight_total * 1.2; | 
|  | MYLOGD("Adjusting total weight from %d to %d\n", weight_total, new_total); | 
|  | weight_total = new_total; | 
|  | snprintf(key, sizeof(key), "dumpstate.%d.max", getpid()); | 
|  | snprintf(value, sizeof(value), "%d", weight_total); | 
|  | int status = property_set(key, value); | 
|  | if (status) { | 
|  | MYLOGE("Could not update max weight by setting system property %s to %s: %d\n", | 
|  | key, value, status); | 
|  | } | 
|  | } | 
|  |  | 
|  | snprintf(key, sizeof(key), "dumpstate.%d.progress", getpid()); | 
|  | snprintf(value, sizeof(value), "%d", progress); | 
|  |  | 
|  | if (progress % 100 == 0) { | 
|  | // We don't want to spam logcat, so only log multiples of 100. | 
|  | MYLOGD("Setting progress (%s): %s/%d\n", key, value, weight_total); | 
|  | } else { | 
|  | // stderr is ignored on normal invocations, but useful when calling /system/bin/dumpstate | 
|  | // directly for debuggging. | 
|  | fprintf(stderr, "Setting progress (%s): %s/%d\n", key, value, weight_total); | 
|  | } | 
|  |  | 
|  | if (control_socket_fd >= 0) { | 
|  | dprintf(control_socket_fd, "PROGRESS:%d/%d\n", progress, weight_total); | 
|  | fsync(control_socket_fd); | 
|  | } | 
|  |  | 
|  | int status = property_set(key, value); | 
|  | if (status) { | 
|  | MYLOGE("Could not update progress by setting system property %s to %s: %d\n", | 
|  | key, value, status); | 
|  | } | 
|  | } | 
|  |  | 
|  | void take_screenshot(const std::string& path) { | 
|  | const char *args[] = { "/system/bin/screencap", "-p", path.c_str(), NULL }; | 
|  | run_command_always(NULL, DONT_DROP_ROOT, REDIRECT_TO_STDERR, 10, args); | 
|  | } | 
|  |  | 
|  | void vibrate(FILE* vibrator, int ms) { | 
|  | fprintf(vibrator, "%d\n", ms); | 
|  | fflush(vibrator); | 
|  | } | 
|  |  | 
|  | bool is_dir(const char* pathname) { | 
|  | struct stat info; | 
|  | if (stat(pathname, &info) == -1) { | 
|  | return false; | 
|  | } | 
|  | return S_ISDIR(info.st_mode); | 
|  | } | 
|  |  | 
|  | time_t get_mtime(int fd, time_t default_mtime) { | 
|  | struct stat info; | 
|  | if (fstat(fd, &info) == -1) { | 
|  | return default_mtime; | 
|  | } | 
|  | return info.st_mtime; | 
|  | } | 
|  |  | 
|  | void dump_emmc_ecsd(const char *ext_csd_path) { | 
|  | // List of interesting offsets | 
|  | struct hex { | 
|  | char str[2]; | 
|  | }; | 
|  | static const size_t EXT_CSD_REV = 192 * sizeof(hex); | 
|  | static const size_t EXT_PRE_EOL_INFO = 267 * sizeof(hex); | 
|  | static const size_t EXT_DEVICE_LIFE_TIME_EST_TYP_A = 268 * sizeof(hex); | 
|  | static const size_t EXT_DEVICE_LIFE_TIME_EST_TYP_B = 269 * sizeof(hex); | 
|  |  | 
|  | std::string buffer; | 
|  | if (!android::base::ReadFileToString(ext_csd_path, &buffer)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | printf("------ %s Extended CSD ------\n", ext_csd_path); | 
|  |  | 
|  | if (buffer.length() < (EXT_CSD_REV + sizeof(hex))) { | 
|  | printf("*** %s: truncated content %zu\n\n", ext_csd_path, buffer.length()); | 
|  | return; | 
|  | } | 
|  |  | 
|  | int ext_csd_rev = 0; | 
|  | std::string sub = buffer.substr(EXT_CSD_REV, sizeof(hex)); | 
|  | if (sscanf(sub.c_str(), "%2x", &ext_csd_rev) != 1) { | 
|  | printf("*** %s: EXT_CSD_REV parse error \"%s\"\n\n", | 
|  | ext_csd_path, sub.c_str()); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static const char *ver_str[] = { | 
|  | "4.0", "4.1", "4.2", "4.3", "Obsolete", "4.41", "4.5", "5.0" | 
|  | }; | 
|  | printf("rev 1.%d (MMC %s)\n", | 
|  | ext_csd_rev, | 
|  | (ext_csd_rev < (int)(sizeof(ver_str) / sizeof(ver_str[0]))) ? | 
|  | ver_str[ext_csd_rev] : | 
|  | "Unknown"); | 
|  | if (ext_csd_rev < 7) { | 
|  | printf("\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (buffer.length() < (EXT_PRE_EOL_INFO + sizeof(hex))) { | 
|  | printf("*** %s: truncated content %zu\n\n", ext_csd_path, buffer.length()); | 
|  | return; | 
|  | } | 
|  |  | 
|  | int ext_pre_eol_info = 0; | 
|  | sub = buffer.substr(EXT_PRE_EOL_INFO, sizeof(hex)); | 
|  | if (sscanf(sub.c_str(), "%2x", &ext_pre_eol_info) != 1) { | 
|  | printf("*** %s: PRE_EOL_INFO parse error \"%s\"\n\n", | 
|  | ext_csd_path, sub.c_str()); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static const char *eol_str[] = { | 
|  | "Undefined", | 
|  | "Normal", | 
|  | "Warning (consumed 80% of reserve)", | 
|  | "Urgent (consumed 90% of reserve)" | 
|  | }; | 
|  | printf("PRE_EOL_INFO %d (MMC %s)\n", | 
|  | ext_pre_eol_info, | 
|  | eol_str[(ext_pre_eol_info < (int) | 
|  | (sizeof(eol_str) / sizeof(eol_str[0]))) ? | 
|  | ext_pre_eol_info : 0]); | 
|  |  | 
|  | for (size_t lifetime = EXT_DEVICE_LIFE_TIME_EST_TYP_A; | 
|  | lifetime <= EXT_DEVICE_LIFE_TIME_EST_TYP_B; | 
|  | lifetime += sizeof(hex)) { | 
|  | int ext_device_life_time_est; | 
|  | static const char *est_str[] = { | 
|  | "Undefined", | 
|  | "0-10% of device lifetime used", | 
|  | "10-20% of device lifetime used", | 
|  | "20-30% of device lifetime used", | 
|  | "30-40% of device lifetime used", | 
|  | "40-50% of device lifetime used", | 
|  | "50-60% of device lifetime used", | 
|  | "60-70% of device lifetime used", | 
|  | "70-80% of device lifetime used", | 
|  | "80-90% of device lifetime used", | 
|  | "90-100% of device lifetime used", | 
|  | "Exceeded the maximum estimated device lifetime", | 
|  | }; | 
|  |  | 
|  | if (buffer.length() < (lifetime + sizeof(hex))) { | 
|  | printf("*** %s: truncated content %zu\n", ext_csd_path, buffer.length()); | 
|  | break; | 
|  | } | 
|  |  | 
|  | ext_device_life_time_est = 0; | 
|  | sub = buffer.substr(lifetime, sizeof(hex)); | 
|  | if (sscanf(sub.c_str(), "%2x", &ext_device_life_time_est) != 1) { | 
|  | printf("*** %s: DEVICE_LIFE_TIME_EST_TYP_%c parse error \"%s\"\n", | 
|  | ext_csd_path, | 
|  | (unsigned)((lifetime - EXT_DEVICE_LIFE_TIME_EST_TYP_A) / | 
|  | sizeof(hex)) + 'A', | 
|  | sub.c_str()); | 
|  | continue; | 
|  | } | 
|  | printf("DEVICE_LIFE_TIME_EST_TYP_%c %d (MMC %s)\n", | 
|  | (unsigned)((lifetime - EXT_DEVICE_LIFE_TIME_EST_TYP_A) / | 
|  | sizeof(hex)) + 'A', | 
|  | ext_device_life_time_est, | 
|  | est_str[(ext_device_life_time_est < (int) | 
|  | (sizeof(est_str) / sizeof(est_str[0]))) ? | 
|  | ext_device_life_time_est : 0]); | 
|  | } | 
|  |  | 
|  | printf("\n"); | 
|  | } | 
|  |  | 
|  | // TODO: refactor all those commands that convert args | 
|  | void format_args(int argc, const char *argv[], std::string *args) { | 
|  | LOG_ALWAYS_FATAL_IF(args == nullptr); | 
|  | for (int i = 0; i < argc; i++) { | 
|  | args->append(argv[i]); | 
|  | if (i < argc -1) { | 
|  | args->append(" "); | 
|  | } | 
|  | } | 
|  | } | 
|  | void format_args(const char* command, const char *args[], std::string *string) { | 
|  | LOG_ALWAYS_FATAL_IF(args == nullptr || command == nullptr); | 
|  | string->append(command); | 
|  | if (args[0] == nullptr) return; | 
|  | string->append(" "); | 
|  |  | 
|  | for (int arg = 1; arg <= 1000; ++arg) { | 
|  | if (args[arg] == nullptr) return; | 
|  | string->append(args[arg]); | 
|  | if (args[arg+1] != nullptr) { | 
|  | string->append(" "); | 
|  | } | 
|  | } | 
|  | // TODO: not really working: if NULL is missing, it will crash dumpstate. | 
|  | MYLOGE("internal error: missing NULL entry on %s", string->c_str()); | 
|  | } |